6 FUEL & AIR SYSTEMS (Carburation et Filtre à air) 2010

Page 1

319 0000


SECTION

6

WINDSHIELDS TOURING LUGGAGE

66116002

SEATS & SISSY BARS 43811130

EXHAUST FUEL/AIR SYSTEMS 53409060

POWER COMMANDER III USB

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1020-0014

•USB (Universal Serial Bus) port provides an instant, problem-free way to connect your Power Commander to a computer •Provides precise information for fine-tuning a fuel-injected motorcycle when changing an air filter, installing a new exhaust system or doing additional engine performance modifications •Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock; Dynojet continuously maps new calibrations for each bike, which are available for downloading at their website (www.powercommander.com) •If you do not have a computer, you can change the settings with three touch buttons on the faceplate •OEM-style wiring connectors with improved harness protection are supplied; no wiring modifications required •Includes easy-to-follow instructions •Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment •Features an expansion port for future add-on modules from Dynojet •Software is compatible with Windows 98se/ME/2000/XP; opens all maps with .djm extension •USB special cable and 9V battery power adapter are included •Adapters allow you to activate a Power Commander for changing or altering maps while disconnected from the bike •Professional adapter is ideal for service/parts department applications, consumer adapter is for limited use •Made in the U.S.A. NOTE: Not legal for sale or use on pollution controlled vehicles. POWER COMMANDER III USB

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

PART # 1020-0533 1020-0286 1020-0001 1020-0002 1020-0005 1020-0287 1020-0003 1020-0534

DESCRIPTION For 08 Twin Cam Touring models For 07 Twin Cam Touring models (w/ O2 eliminators) For 02-06 Twin Cam Touring models For 99-01 Twin Cam Touring models For 97-98 Evolution Touring models For 07-08 FXST/FLST (w/ O2 eliminators) For 01-06 FXST/FLST For 08 V-Rod™

SUG. RETAIL $379.95 369.95 359.95 359.95 359.95 369.95 359.95 369.95

PART # 1020-0291 1020-0004 1020-0288 1020-0218 1020-0006 1020-0290 1020-0289

DESCRIPTION For 07 V-Rod™ For 02-06 V-Rod™ For 07-08 Dyna Glide (w/ O2 eliminators) For 06 Dyna Glide w/ O2 eliminators For 04-05 Dyna Glide For 07-08 XL883 (w/ O2 eliminators) For 07-08 XL1200 (w/ O2 eliminators)

SUG. RETAIL $359.95 359.95 369.95 369.95 359.95 369.95 369.95

SUG. RETAIL $14.95 69.95 12.95

PART # DS-189144 1020-0014

DESCRIPTION Serial 110V professional power adapter Repl. USB special cable

SUG. RETAIL $79.95 39.95

POWER ADAPTERS/ CABLE

BRAKES

PART # 66116002 53409060 43811130

DESCRIPTION Repl. USB consumer 9V battery power adapter USB dual volt 110V/220V professional power adapter International plug adapter kit

TANKS & CALIFORNIA A.R.B. APPROVED POWER COMMANDER III USB-EX OIL FILTERS •Provides virtually the same tuning functionality as the original Power Commander III USB DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

320

•Compatible with Tuning Link software •Creates full fuel adjustability, fuel and ignition mapping and custom maps •A built-in ignition module and ignition timing changes of up to +/- 10° are also incorporated •Rev X-tend feature allows you to increase the stock rev limiter to 6200 rpm •Maps created for Power Commander III USB can be loaded and will automatically be converted to the proper format •Will work with any exhaust system •Increases torque and horsepower •Made in the U.S.A. NOTE: C.A.R.B. EO #D-619. PART # DESCRIPTION POWER COMMANDER USB-EX 1020-0751 For 08 Twin Cam Touring models 1020-0366 For 07 Twin Cam Touring models 1020-0372 For 02-06 Twin Cam Touring models 1020-0375 For 99-01 Twin Cam Touring models 1020-0378 For 97-98 Evolution models 1020-0367 For 07-08 FXST/FLST 1020-0373 For 01-06 FXST/FLST 1020-0752 For 08 V-Rod 1020-0371 For 07 V-Rod 1020-0376 For 02-06 V-Rod

SUG. RETAIL $379.95 369.95 359.95 359.95 359.95 369.95 359.95 369.95 359.95 359.95

SUG. PART # DESCRIPTION RETAIL POWER COMMANDER USB-EX (CONT) 1020-0368 For 07-08 Dyna Glide $369.95 1020-0374 For 06 Dyna Glide 369.95 1020-0377 For 04-05 Dyna Glide 359.95 1020-0370 For 07-08 XL883 369.95 1020-0369 For 07-08 XL1200 369.95 POWER ADAPTERS/CABLE 66116002 Repl. USB consumer 9V battery power adapter 14.95 53409060 USB dual volt 110V/220V professional power adapter 69.95 43811130 International plug adapter kit 12.95 1020-0014 Repl. USB special cable 39.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturers’ information.

All part numbers in BOLD MAGENTA are new for 2010.


SECTION

6

WINDSHIELDS POWER COMMANDER V •Fuel and timing control •Rev Xtend •”Warm up” fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on the reading) •The Power Commander III USB allowed you to add extra fuel during start-up based on “number of revolutions” of the engine •Now the Power Commander V can read the exact engine temp through the bike’s own ECM which allows the tuner to choose how much fuel to add •Cold starting on heavily modified engines should now be much more controllable and easy to adjust •Software displays J1850 data from bikes’ stock ECU •Reduced size from the PCIII USB •Easy to install •USB powered from computer; 9 volt adapter is no longer needed •Two position map switching function built in •Can add any SPST switch and toggle between two different fuel/timing maps •Gear/speed input allows for map adjustment based on gear •Analog input allows user to install any 0-5 volt sensor •Build an adjustment table based on analog input such as boost or temperature •Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected •Ten throttle position columns •More tuning ranges than PCIII USB •Enhanced “accel pump” utility •Made in the U.S.A. PART # 1020-1121 1020-0841 1020-1122 1020-0842 1020-0940

DESCRIPTION SUG. RETAIL For 10 FLHT/FLHX/FLHR/FLTR $379.95 For 09 FLHT/FLHX/FLHR/FLTR 369.95 For 10 FXST/FLST/FXCW 369.95 For 09 FXST/FLST/FXCW 369.95 For 09 FLSTC/FLSTN 369.95

PART # 1020-1124 1020-0844 1020-1123 1020-0843 1020-1118

DESCRIPTION For 10 V-Rod For 09 V-Rod For 10 Dyna Glide For 09 Dyna Glide For 10 XL 883

SUG. RETAIL $369.95 369.95 369.95 369.95 369.95

PART # 1020-0839 1020-1119 1020-0840 1020-1120 1020-1108

DESCRIPTION For 09 XL 883 For 10 XL 1200 For 09 XL 1200 For 10 XR 1200 For 09 XR 1200

SUG. RETAIL $369.95 369.95 369.95 369.95 369.95

TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

AUTO TUNE KIT

ELECTRICAL

•Plugs directly into the Power Commander-V with a single cable •Includes power connector that plugs into the bike’s harness •Makes automatic fuel adjustments •User can specify what air/fuel ratio to make each rpm and throttle position % combination •Makes it possible to adjust cruise for best fuel economy as well as larger throttle openings for peak power •Base settings included for air/fuel ratios but are fully adjustable if need be •Made in the U.S.A. NOTE: Because of possible clearance issues, some aftermarket exhaust systems may require modifications or relocation of their sensor bungs.

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES PART # 1020-1117 1020-0857

DESCRIPTION For 10 Touring models For 96-99 Touring EFI models

SUG. RETAIL $379.95 369.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

LCD DISPLAY ACCESSORY FOR POWER COMMANDER III USB/USB-EX AND POWER COMMANDER V

With multi function hub

Without multi function hub

•Connects to any Power Commander USB via a “quick-disconnect” cable •Designed to remain on the bike at all times, even in harsh weather •Displays all available data from the Power Commander when connected •Stores and switches between multiple maps in the on-board memory; maps can be sent to the Power Commander “on the fly” •Adjust maps using the controls on the display screen •Logs data for later analysis •Increase data storage for maps and logging by adding an SD Memory card; sold separately •Can be easily removed from the bike to be programmed with a desktop computer PART # DESCRIPTION •USB programmable and upgradable 1020-0325 LCD display for Power Commander •Uses an active matrix TFT LCD 240 x 320 16-bit screen 1020-0924 LCD display for Power Commander V •Made in the U.S.A.

SUG. RETAIL $299.95 299.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturer’s information.

All part numbers in BOLD MAGENTA are new for 2010.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

321


SECTION

6

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1020-0326

MULTI-FUNCTION HUB ACCESSORY FOR POWER COMMANDER USB/USB-EX •The Multi-Function Hub allows access to advanced 1020-0327 expansion features of the Power Commander USB •Compatible with the LCD display, but the display is not required •Four separate functions can be accessed with the Multi-Function Hub •The Map Selection Switch (7/8” bar mount) allows the rider to switch between two different maps in the Power Commander. This allows a map for economy and a separate map for performance •The Gear Position/Speed function allows fuel and timing adjustments to be made depending on the gear selected and the position of the throttle, up to +/-50% fuel and +/-10 degrees of timing •Pressure input allows the fuel to be increased along with the boost level on turbocharged installations. The change of boost level does not require a re-mapping of the Power Commander •Relay outputs allow up to two warning lights or relays to be triggered independently to activate items such as shift lights, nitrous systems, or air shifter. The trigger can be by throttle percent, rpm, or both •Comes complete with installation instructions, wiring diagrams and CD with the required software updates •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1020-0326 Multi-Function Hub and wiring harness for Map Selection Switch only $169.95 1020-0327 Multi-Function Hub and wiring harness for Map Selection, Gear Position, Speed sensor, Pressure Input and two relay outputs 199.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS WIDE BAND COMMANDER 2 AIR/FUEL RATIO MONITOR WITH COLOR LCD

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

322

•The second generation of the Dynojet Wide Band Air/Fuel Ratio Monitor kit with digital technology •The WB2 technical features include 0-5V calibrated analog AFR output (connects to external data acquisition device), one wire RPM hookup, 0-5V analog input (TPS, MAF, boost, etc.), built-in sensor condition test, durable enclosure and wire sheathing for years of trouble-free operation and Dynojet CAN-Link communication allows for expansion options •WB2 comes with 1 Wide Band 2 module, color “touch screen” LCD, 1 Bosch LSU 4.2 Wide Band oxygen sensor, 1 oxygen sensor cable, 1 oxygen sensor weld bung, plug and copper washer, 2 Dynojet CAN-Link port seals, 3 wire T-taps, PART # 1 terminal strip plug, 2 dual lock strips, 1 alcohol swab, 3 zip 1020-0858 ties, 2 Dynojet decals and installation instructions

DESCRIPTION Wide band commander 2

SUG. RETAIL $499.95

FI CONTROLLER •Plug-in module offers three user-selectable base fuel curves designed to improve engine operation on fuel-injected models •Can be configured to suit a wide variety of modifications •Adjustments are made via three potentiometers that adjust the fuel curve in the proper ranges for the application •Fuel mixture can be enriched or leaned as required •Uses factory connectors for easy installation — there is no PC required for tuning or adjusting the fuel curves •No modifications to the stock ECU •Removing the FI controller returns vehicle to factory configuration •Made in the U.S.A. NOTE: Not legal PART # 1020-0190 1020-0191 1020-0192 1020-0539 1020-0503 1020-0193 1020-0540

for sale or use on pollution controlled vehicles. DESCRIPTION SUG. RETAIL For 97-98 FLHT, FLHR, FLTR models $248.95 For 99-01 FLHT, FLHR, FLTR models 248.95 For 02-05 FLHT, FLHR, FLTR models 248.95 For 07 FLHT, FLHR, FLHX, FLTR models 259.95 For 06 FLHT, FLHR, FLHX, FLTR models 248.95 For 01-05 FXST/FLST, 04-05 Dyna Glide 248.95 For 07 FXST/FLST 259.95

PART # 1020-0504 1020-0541 1020-0505 1020-0194 1020-0542 1020-0543

1020-0192 DESCRIPTION For 06 FXST/FLST For 07 Dyna For 06 Dyna For 02-07 V-Rod models For 07 XL 883 For 07 XL 1200

SUG. RETAIL $248.95 259.95 258.95 248.95 259.95 259.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturers’ information.

All part numbers in BOLD MAGENTA are new for 2010.


SECTION

6

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE 1020-0538

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS FUELPAK •Available in original version which is not legal for sale in CA or new California A.R.B approved version with all the same features as the original •Throttle position sensor-based system simplifies the process of fuel-injection tuning •Enables you to fine-tune the fuel mixture throughout the entire rpm range with the touch of a button •Increases power and improves throttle response •Very user friendly; plugs into the existing harness on the bike •No computer or software is required, simply punch in the values supplied with the Fuelpak •Values supplied are for use with Vance & Hines exhaust systems •Fuelpak will also work with other exhaust systems (contact V&H tech support for tuning information) •Includes all necessary mounting hardware

CABLES BRAKES TANKS & OIL FILTERS

NOTE: Not legal for sale or use on pollution controlled vehicles (Original Fuelpak).

DASHES & GAUGES

NOTE: EO #D-632-1 (C.A.R.B. approved Fuelpak). NOTE: Requires the use of a high-performance air filter. PART # DESCRIPTION ORIGINAL FUELPAK FOR 49 STATE USE 1020-0750 For 08-10 FXCW/C, 08-10 FLSTSB 1020-0360 For 01-06 FXST, 01-10 FLST (except 07-10 FLSTF, 08-10 FLSTSB) 1020-0362 For 04-10 Dyna and 02-10 V-Rod models 1020-0568 08-10 FLHT, FLHR, FLHX, FLTR models 1020-0361 For 02-07 FLHT, FLHR, FLHX, FLTR models 1020-0538 For 07-09 XL, 07-10 FXST/B/C, SSE, 07-10 FLSTF 1020-1136 For 10 XL

SUG. RETAIL

PART # CALIFORNIA A.R.B. APPROVED 1020-0823 1020-0818 1020-0820 1020-0822 1020-0819 1020-0821

SUG. RETAIL

DESCRIPTION For 08-10 FXCW/C, 08-10 FLSTSB For 01-06 FXST, 01-10 FLST (except 07-10 FLSTF, 08-10 FLSTSB) For 04-10 Dyna and 02-10 V-Rod models 08-10 FLHT, FLHR, FLHX, FLTR models For 02-07 FLHT, FLHR, FLHX, FLTR models For 07-09 XL, 07-10 FXST/B/C, SSE, 07-10 FLSTF

$279.95 279.95 279.95 279.95 279.95 279.95 279.95

$279.95 279.95 279.95 279.95 279.95 279.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturers’ information.

All part numbers in BOLD MAGENTA are new for 2010.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

323


SECTION

6

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS Fi2000R PLUG-IN FUEL PROCESSOR EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

324

•Proven Fi2000R comes with leads that snap directly into the bike’s injector bodies •Standard open-loop design for 06 Dyna and all 07-10 models can use exhaust systems that do or do not have O2 sensor bungs •More advanced tuning for modified bikes •Think of third tuning pot as an electronic main jet while thinking of the entire Fi2000R as a digital jet kit •Full range of fuel adjustment (0-10 settings) across all rpm ranges •Three easy identifiable lights: green – Fi2000 is adding more fuel to the air/fuel ratio approx. 14:1; Green and yellow lights – these lights will be on in unison when throttle is open more quickly and air/fuel mixture is approx. 12.5:1; Red – light comes on and stays on as long as the Fi200 follows the fuel curve while adjusting to approx. 12.8:1 air/fuel ratio, which is where the engine will produce its best full-throttle power •Step-by-step instructions •Improves rideability by smoothing out the powerband and giving the bike more throttle response •Corrects lean air/fuel mixture problems; eliminates overheating, backfiring on deceleration, hesitation on acceleration or an uneven cruising rpm •Waterproof circuit board •No fuel map adjustments or computer downloads required NOTE: Standard models not legal for operation on public highways in the state of California. NOTE: C.A.R.B. E.O. # D-633-1. PART # DESCRIPTION STANDARD 1020-0301 For 07-10 FXST/FLST and 06-10 Dyna Glide 1020-0544 For 08-10 FXCW/FXCWC 1020-0206 For 06 FXST/FLST 1020-0095 For 01-05 FXST/FLST and 04-05 Dyna Glide 1020-0561 For 08-09 FLHT, FLHR, FLTR, FLHX 1020-0304 For 07 FLHT, FLHR, FLTR, FLHX 1020-0204 For 06 FLHT, FLHR, FLTR, FLHX 1020-0093 For 95-05 FLHT, FLHR, FLTR, FLHX 1020-0306 For 07-10 XL

SUG. RETAIL $249.95 249.95 239.95 249.95 249.95 249.95 249.95 249.95 249.95

PART # DESCRIPTION STANDARD (CONT) 1020-0626 For 08-10 V-Rod 1020-0094 For 02-07 V-Rod 1020-0341 Repl. O2 Sensor Eliminator kit CALIFORNIA 1020-0549 For 06 FXST/FLST 1020-0550 For 01-05 FXST/FLST and 04-05 Dyna Glide 1020-0548 For 06 FLHT, FLHR, FLTR, FLHX 1020-0546 For 95-05 FLHT, FLHR, FLTR, FLHX 1020-0547 For 02-07 V-Rod

SUG. RETAIL $249.95 249.95 35.95 249.95 249.95 249.95 249.95 249.95

Fi2000R O2 FUEL PROCESSOR •The Fi2000R O2 digital fuel processor is designed to work with all H-D exhaust systems (stock or aftermarket) equipped with oxygen sensors in place (closed-loop design) •Works much like a carburetor jet kit with adjustments similar to the air-mixture screw, the needle and clip positions and the main jet •The Fi2000R increases horsepower and torque by optimizing stock lean air/fuel mixtures (helps cool the engine temps as well) •Quick and simple installation with plug-and-ride technology with OEM-style connectors •No confusing computer downloads to install •No expensive dyno-testing required •Pre-configured from the factory for your make and model, but easy to adjust should your specific application need it •Improves overall rideability •Virtually eliminates backfiring on deceleration NOTE: Standard models not legal for operation on public highways in the state of California. NOTE: C.A.R.B. E.O. # D-633-1. PART # DESCRIPTION STANDARD 1020-0938 For 08-10 FXST/FLST 1020-0303 For 07 FXST/FLST 1020-0545 For 08-10 FXCW/FXCWC 1020-0937 For 08-10 Dyna Glide 1020-0302 For 07 Dyna Glide 1020-0314 For 06 Dyna Glide 1020-1144 For 10 FLHT, FLHR, FLTR, FLHX 1020-0562 For 08-09 FLHT, FLHR, FLTR, FLHX 1020-0305 For 07 FLHT, FLHR, FLTR, FLHX 1020-0307 For 07-10 XL 1020-0628 For 08-10 VSCR V-Rod

SUG. RETAIL $279.95 279.95 279.95 279.95 279.95 279.95 279.95 279.95 279.95 279.95 279.95

PART # CALIFORNIA 1020-0553 1020-0558 1020-0552 1020-0556 1020-1145 1020-0564 1020-0555 1020-0560 1020-0629

DESCRIPTION For For For For For For For For For

07-10 FXST/FLST 08-10 FXCW/FXCWC 07-10 Dyna Glide 06 Dyna Glide 10 FLHT, FLHR, FLTR, FLHX 08-09 FLHT, FLHR, FLTR, FLHX 07 FLHT, FLHR, FLTR, FLHX 07-10 XL 08-10 VSCRA/B/R V-Rod

SUG. RETAIL $279.95 279.95 279.95 279.95 279.95 279.95 279.95 279.95 279.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturers’ information.

All part numbers in BOLD MAGENTA are new for 2010.


SECTION

6

TERMINAL VELOCITY III FUEL MANAGEMENT SYSTEMS •Auto tune, self-learning computer automatically adjusts the fuel/air mixture as you ride and compensates for changes in engine load conditions •Re-calibrates for specific modifications made to your motorcycle – exhaust pipes, air cleaner, etc. •Increases horsepower and torque on most bikes when used with a performance exhaust and air cleaner •Quick-connect plugs for easy installation •No manual adjustments required – tamper-proof surface mount design •Maximizes performance and engine efficiency while decreasing emissions and fuel consumption •Does not require dyno time for adjustment •Works in conjunction with both factory and race tuner downloads •Made in the U.S.A.

WINDSHIELDS TOURING 1020-0773

LUGGAGE

NOTE: Standard models not for sale or use on California emissions-equipped motorcycles. NOTE: C.A.R.B. EO #D-655. PART # STANDARD 1020-1135 1020-0777 1020-0776 1020-0774 1020-0773 1020-0775 1020-0778 1020-0779

DESCRIPTION

SUG. RETAIL

For 10 FLHT/FLHR/FLTR/FLHX; 6-pin oval plug/ TPS and uses factory O2 sensors For 08-09 FLHT/FLHR/FLTR/FLHX; 6-pin oval plug/ TPS and uses factory O2 sensors For 07-10 FXST, 06-10 Dyna, 07 FLHT/FLHR/FLTR/FLHX; round plug/TPS and uses factory O2 sensors For 05-06 FXST, 05-06 FLHT/FLHR/FLTR; round plug/ TPS and includes one O2 sensor For 01 FXST, all 02-04 EFI models, 02-07 V-Rod; flat plug/TPS and includes one O2 sensor For 95-01 models w/ Magnetti-Marelli EFI; flat plug/ TPS and includes one O2 sensor For 07-10 XL; flat plug/TPS and uses factory O2 sensors For 08-10 V-Rod (all), flat plug/ TPS and uses factory O2 sensors

$424.95 424.95 424.95 424.95 424.95 424.95 424.95 424.95

PART # DESCRIPTION SUG. RETAIL CALIFORNIA 1020-1134 For 10 FLHT/FLHR/FLTR/FLHX; 6-pin oval plug/ TPS and uses factory O2 sensors $424.95 1020-0945 For 08-09 FLHT/FLHR/FLTR/FLHX; 6-pin oval plug/ TPS and uses factory O2 sensors 424.95 1020-0944 For 07-10 FXST/FLST/FXCW, 06-10 Dyna, 07 FLHT/FLHR/ FLTR/FLHX; round plug/TPS and uses factory O2 sensors 424.95 1020-0942 For 05-06 FXST/FLST, 05-06 FLHT/FLHR/FLTR; round plug/TPS and includes one O2 sensor 424.95 1020-0941 For 01 FXST/FLST, all 02-04 EFI models, 02-07 V-Rod; flat plug/TPS and includes one O2 sensor 424.95 1020-0943 For 95-01 models w/ Magnetti-Marelli EFI; flat plug/ TPS and includes one O2 sensor 424.95 1020-0946 For 07-10 XL; flat plug/TPS and uses factory O2 sensors 424.95 1020-0947 For 08-10 V-Rod (all), flat plug/TPS and uses factory O2 sensors 424.95 REPLACEMENT PARTS 2130-0009 Repl. O2 sensor (ea.) 104.95 2404-0059 Repl. O2 bung (ea.) 15.95

1020-0323

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

THUNDERMAX ECM WITH AUTO-TUNE CLOSED LOOP SYSTEM •ThunderMax ECM with Auto-Tune module mounts conveniently in place of the factory ECM and plugs in to the existing harness •Maps, software and firmware updates available on line at no charge •On-line tech support and map analysis •Installation and how-to videos avaialble online (YouTube-ThunderMax AV) 1020-0836 •New AutoMap software feature creates new base map based on AutoTune automatically generated AFR corrections •Quickly find the best map for your application using SmartLink Map Filters •With the Auto-Tune, AFR tuning for component and exhaust changes are self-adjusting – simply install, download a map and ride while Auto-Tune maintains target AFR in all conditions •Includes ThunderMax ECM and Auto-Tune Module, plug-in harness and two wide band sensors, SmartLink Software and communication cable, Quick-Start Easy Install and Comprehensive User’s Manual, technical support and free software and updates •Select and install a matching base map and enjoy the efficiency of a balanced fuel curve for throttle response like you’ve never imagined •No extensive dyno tuning required for most models •Alpha-N design unaffected by long duration camshafts •Replaces factory ECM – easy plug-in installation and set-up •Simple adjustable rev limit, idle, speedo calibration and decel pop control settings •Easily adjust fuel, ignition timing and cold start maps •Supports nitrous and supercharger applications •Versatile – plug and ride or live-tune a custom application •Logs engine starts, engine temperatures and total hours of operation time in 100 rpm increments •Read diagnostic codes through software or traditional methods •Record live data during riding or tuning sessions; choose replay speed for data analysis •ThunderMax includes SmartLink Software and cable for easy PC tuning, maps for popular engine combinations and Quick-Start Easy Install and Comprehensive User’s Manual •Made in the U.S.A.

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

1020-0532

TANKS & OIL FILTERS DASHES & GAUGES 1022-0039

NOTE: Because of possible clearance issues, some aftermarket exhaust systems may require modifications or relocation of their O2 sensor port bungs. NOTE: Legal in California only for racing vehicles which may never be used upon a highway. Some products may not be legal for sale or use on pollution-controlled vehicles, check your local laws and the manufacturer’s information. PART # 1020-0323 1020-0836 1020-0817

DESCRIPTION For 01-10 Big Twin models w/ Delphi EFI (except 08-10 Touring models) For 08-09 FLT, FLHR, FLHX and FLTR models For 02-10 V-Rod models

SUG. RETAIL $899.95 989.95 899.95

PART # 1020-1131 1020-0532 1022-0039

DESCRIPTION For 08-10 XR1200 For 07-09 XL models (except XR1200) Repl. oxygen sensor (ea.)

SUG. RETAIL $899.95 899.95 130.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturers’ information.

All part numbers in BOLD MAGENTA are new for 2010.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

325


SECTION

6

WINDSHIELDS THUNDERMAX 50

TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING

•California ARB-legal complete replacement engine management system for Delphi®-equipped EFI model Harleys listed below •ThunderMax 50 automatically corrects air/fuel ratios through the use of wide-band oxygen sensors and the ThunderMax AutoTune module •This system allows continuous AFR tuning, keeping the engine at the specified air fuel ratio regardless of the changes in ambient conditions or terrain the vehicle is being operated in – without tuning on a dynamometer •Features increased torque and power over the stock system and maintains excellent fuel economy •System properly self-tunes aftermarket exhaust systems automatically •2001-2006 models will require exhaust systems equiped with or modified for oxygen sensor bungs •Adjustable rev limiter •Provides access to read vehicle diagnostic trouble codes •Made in the U.S.A. PART # DESCRIPTION NOTE: Because of possible clearance issues, some 1020-1133 For 08-10 FXST and FXD models w/ 96” engine (except FXDF) aftermarket exhaust systems may require modifications 1020-1132 For 06 Softail and Touring models w/ 88” engine or relocation of their O2 sensor port bungs. 1020-0837 For 01-05 Softail, 04-05 Dyna and 02-05 Touring models NOTE: C.A.R.B. EO #s D-644, K-001, K-001-1, K-001-2.

1020-0837

SUG. RETAIL $899.95 899.95 899.95

THUNDERMAX EFI AUTO-TUNE MODULE •Interfaces with the ThunderMax ECM to provide real-time data of the air/fuel ratio read by wide-band oxygen sensors installed in the exhaust system •Data is processed in milliseconds by the ThunderMax, which makes instant adjustments to maintain the front and rear cylinder air/fuel ratios specified by the SmartLink software, creating a self-tuning system •Modular design attaches directly to the ThunderMax ECM, eliminating any mounting hassles •Allows ThunderMax ECM owners (version 4.0 and higher) to add true wide-band closed-loop automatic tuning •System fits all 01-08 EFI Harley-Davidson models equipped with ThunderMax (V.4+) ECM (PART #1020-0321) •Requires exhaust system fitted with bungs for oxygen sensors •Allows the user to program the desired air/fuel ratio for maximum power, maximum economy or anywhere in between •Targets specific AFRs, which adjust as you ride •Includes two wide-band oxygen sensors •No splicing required, system simply plugs into the factory wiring harness for total closed-loop functionality •Special Feature – you can view live air/fuel ratios without a computer link by using a ThunderMax digital speedometer •Made in the U.S.A. NOTE: Because of possible clearance issues, some aftermarket exhaust systems may require modifications or relocation of their O2 sensor bungs. PART # NOTE: Legal in California only for racing vehicles which 1020-0322 may never be used upon a highway.

DESCRIPTION Thundermax EFI Auto-Tune Module

SUG. RETAIL $413.95

HANDLEBARS, THUNDERMAX ECM CONTROLS •Open loop system allows you to take control of your EFI-equipped motorcycle software and firmware updates available on line at no charge & MIRRORS •Maps, •Quickly find the best map for your application using SmartLink Map Filters CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

•Includes ThunderMax ECM, SmartLink Software and communication cable, Quick-Start Easy Install and Comprehensive Users Manual, technical support and free software and updates •Select and install a matching base map and enjoy the efficiency of a balanced fuel curve for throttle response like you’ve never imagined •Alpha-N design unaffected by long duration camshafts •Replaces factory ECM, easy plug-in installation and set-up •Simple adjustable rev limit, idle, speedo calibration and decel pop control settings •Easily adjust fuel, ignition timing and cold start maps •Supports Nitrous and Supercharger applications •Versatile – plug and ride or live-tune a custom application •Logs engine starts, engine temperatures and total hours of operation time in 100 rpm increments •Read diagnostic codes through software or traditional methods •Record live data during riding or tuning sessions; choose replay speed for data analysis •ThunderMax includes SmartLink Software and cable for easy PC tuning, maps for popular engine combinations and Quick-Start Easy Install and Comprehensive User’s Manual •Expandable to “closed loop” with available ThunderMax Auto-Tune module •Made in the U.S.A.

FRAMES, SUSPENSION NOTE: Legal in California only for racing vehicles which may never be used upon a highway. # DESCRIPTION SUG. RETAIL & FENDERS PART 1020-0321 For 01-09 w/ Delphi EFI (except 08-09 Touring models) $485.95 FOOTRESTS & LICENSE PLATE FRAMES THUNDERMAX PIGTAIL HARNESS TIRES, •Allows a second port for the communication cable connection to the ThunderMax TUBES & •It is installed to the bike’s wiring harness at the 36-pin ECM connector (connection requires harness plug disassembly; two terminated wires are WHEELS inserted into two unused ports in the 36-pin connector, and a ground wire added) HARDWARE, •Handy for motorcycle models with tight clearances around the ECM such as Dyna, Softail Rocker and 02-05 V-Rod models CHEMICALS •Made in the U.S.A. & TOOLS NOTE: Requires ThunderMax ECM with serial number 114000 or higher PART # DESCRIPTION SUG. RETAIL COVERS, (produced beginning August 2008). Will not work on previous 1022-0059 ThunderMax pigtail harness $18.95 model ThunderMax ECM. SECURITY & GENERAL NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturers’ information.

326

All part numbers in BOLD MAGENTA are new for 2010.


SECTION

6

TCFI3 AUTO-TUNE FUEL-INJECTION SYSTEM •Simultaneously auto-tunes fuel curves for front and rear cylinders under actual riding conditions with new WEGO IIID dual-channel wide-band oxygen sensor interface •Fully programmable plug-in replacement for Delphi® controller •Robust alpha-N (throttle position and rpm-based) fuel control eliminates problems with long duration/high overlap camshafts •Full support for SAE J1850 data bus used on 04-09 models (except 08-09 touring models with electronic throttle control) for communications between the engine control module, instrument cluster, turn signal/security module and diagnostic scan tools •Support for sixth gear indicator on 07-09 models •TCFI also has built-in data logging that stores data for the last 60 minutes of operation at 10 samples per second •PC communications is by means of a USB interface that plugs directly into the existing H-D diagnostic connector •Powerful Windows software for custom programming and extended data logging and diagnostics •User programs a table with the desired air/fuel ratio and the system does the rest – no dyno tuning required •Idle air control including idle rpm and cold start characteristics are fully programmable, which facilitates use of aftermarket throttle bodies with higher airflow •Kit includes TCFI fuel-injection controller, WEGO IIID dual-channel wide-band oxygen sensor interface, two Bosch LSU 4.2 wide-band sensors for front and rear cylinders, USB interface for PC Link, software and two 18 x 1.5mm weld nuts for exhaust pipe

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST 1021-0006

NOTE: Because of possible clearance issues, some aftermarket exhaust systems may require modifications or relocation of their O2 sensor port bungs. NOTE: Not legal for sale or use on pollution-controlled vehicles. PART # DESCRIPTION TFCI3 AUTO-TUNE FUEL-INJECTION SYSTEM 1021-0006 For 01-09 Twin Cam w/ Delphi® 6-pin EFI system (exept 08-09 Touring models) REPLACEMENT COMPONENTS FOR TCFI II FUEL-INJECTION CONTROLLER 1022-0008 Repl. WEGO II oxygen sensor 7806-1563 18 x 1.5mm weld nut (for mounting sensor to exhaust pipe) (ea.) 7806-1564 18 x 1.5mm hex socket plug (for plugging 18 x 1.5 hole after tuning) (ea.)

ENGINE SUG. RETAIL $874.95 119.95 5.95 5.95

TWIN TUNER FUEL-INJECTION CONTROLLER •Allows easy adjustments to OEM Delphi fuel-injection systems to improve performance and match the requirements of performance parts •Mode and up/down push button switches make fuel trim adjustments in the rpm and throttle position ranges required by most applications; fuel trim value is displayed on a bright daylight-readable LED display 1020-0358 •Advanced mode (using optional USB Interface PART #2101-0075 and PC Link Tuner software) allows precise fuel adjustments and independent adjustments to the front and rear cylinders •May be compatible with other controller •Easy plug-in installation and setup •Compact size – only 4” L x 2” W x 1/2” H •Compatible with Twin Scan II+ Tuning Aid – install the Twin Scan II+ and ride the bike, then copy the air/fuel ratio corrections calculated by the Twin Scan II+ into the PC Link Tuner software

1020-0939 1020-0951 1020-0834

DESCRIPTION For 01-09 Big Twin w/ 36-pin Delphi EFI (except 08-09 Touring models) and 08-09 Buell XB, 1125R w/ DDFI fuel-injection system For 08-09 FLHT, FLHR, FLTR and FLHX models w/ 73-pin Delphi EFI For 07-09 XL w/ 36-pin Delphi EFI For 03-07 Buell w/ DDFI fuel-injection system

HANDLEBARS, CONTROLS & MIRRORS CABLES 1020-0939 SUG. RETAIL $217.95 224.95 217.95 217.95

•Twin Tuner II has all the features of the original Twin Tuner and includes ignition timing control capability •Easily adjusts the OEM Delphi fuel-injection and ignition to match the requirements of performance parts including high-compression pistons/heads, camshafts, free-flowing exhausts, and low-restriction air filters – add 30% or subtract 20% fuel and retard spark timing up to 10° •You can use the mode and up/down push button switches to make fuel trim adjustments in the RPM and throttle position ranges required by most applications. The fuel trim value is displayed on a bright daylight readable LED display •The Twin Tuner also has an advanced mode, using the optional USB Interface and PC Link Tuner 1020-0948 software to make precise fuel adjustments and allows independent adjustments to the front and rear cylinders •May be compatible with other controller maps •Easy plug-in installation and setup, with no splicing, cutting, crimping, or bulky interconnections •Compact size – only 4” L x 2” W x 1/2” H •Compatible with Twin Scan II+ Tuning Aid – install the Twin Scan II+ and ride the bike, then copy the air/fuel ratio corrections calculated by the Twin Scan II+ into the PC Link Tuner software NOTE: Not legal for sale or use on pollution-controlled vehicles. DESCRIPTION For 01-09 Big Twin w/ 36-pin Delphi EFI (except 08-09 Touring models) For 08-09 FLHT, FLHR, FLTR and FLHX models w/ 73-pin Delphi EFI

SUG. RETAIL $249.95 296.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturers’ information.

All part numbers in BOLD MAGENTA are new for 2010.

GASKETS & SEALS

LIGHTING

TWIN TUNER II

PART # 1020-0948 1020-0949

TRANSMISSION & DRIVELINE

ELECTRICAL

NOTE: Not legal for sale or use on pollution-controlled vehicles. PART # 1020-0358

FUEL/AIR SYSTEMS

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

327


SECTION

6

WINDSHIELDS TWIN TUNER EX

TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

•Allows easy adjustments to OEM Delphi fuel-injection systems to improve performance and match the requirements of performance parts •50-state street legal (ARB E.O. D-641) – fuel adjustments with the Twin Tuner EX are only allowed above 60% throttle position or 5000 rpm •Mode and up/down pushbutton switches make fuel trim adjustments in the RPM and throttle position ranges required by most applications; fuel trim value is displayed on a bright daylight-readable LED display •Advanced mode (using optional USB Interface PART #2101-0075 and PC Link Tuner software) allows precise fuel adjustments and independent adjustments to the front and rear cylinders •Can use DynoJet Power Commander maps •Easy plug-in installation and setup •Compact size – only 4” L x 2” W x 1/2” H •Compatible with Twin Scan II+ Tuning Aid – install the Twin Scan II+ and ride the bike, then copy the air/fuel ratio corrections calculated by the Twin Scan II+ into the PC Link Tuner software PART # 1020-0835

DESCRIPTION For 01-08 Big Twin w/ 36-pin Delphi EFI (except 08 Touring models) and 08-09 XB, 1125R Buell w/ DDFI fuel-injection system (Buell 1125R fitment not ARB certified)

USB INTERFACE

SUG. RETAIL

•Interfaces all Daytona Twin Tec engine controls (ignition and fuel injection systems) to USB port on newer laptops •Includes all required adapters for PART #s DS-242372, DS-242374, DS-242375, DS-242377 and 2101-0034 ignitions and 1021-0001, 1021-0002, 1021-0004, 1021-0005 and 2101-0076 fuel injection systems •Compatible with all Daytona Twin Tec software and Windows XP/Vista (updated software drivers included on CD-ROM) •Includes 6’ USB cable •USB interface allows you to connect to laptops with no serial port, and to multiple engine controls; no need for multiple cables or separate USB adapters •A switch activates operation, with one position for TC88 and the second position for all other engine control products •Includes a connector that mates with the four-terminal Deutsch data link connector on 99-up Twin Cam 88 models, as well as adapters for earlier Shovelhead and Evolution applications NOTE: Not compatible with Twin Scan 88 and WEGO II systems, which require a separate adapter.

$217.95

PART # 2101-0075

DESCRIPTION For all Daytona Twin Tec engine controls

GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

SUG. RETAIL $99.95

1020-0828

BIG SHOT™ ADJUSTABLE FUEL INJECTION TUNER •A load-based fuel injection module; does not require splicing or modifications 1020-0309 to motorcycle during installation •Comes pre-loaded with base maps for different models which can then be fine tuned to individual riding style and bike •Laptops and dyno machines are not required during tuning to maximize performance •Utilizes the latest in load-based technology in fuel injection performance •Detects the exact amount of load on the engine at any rpm and any road speed; delivers the perfect amount of fuel to the engine for optimum performance •A superior design over fuel injection modules that work off throttle position NOTE: Not for sale in California. PART # DESCRIPTION 1020-0531 For 07 Big Twin and 08 FXST/FLST/FXD models 1020-0310 For 06 FXST/FLST/FLT models 1020-0309 For 95-05 Big Twin models 1020-0770 For 08-09 FLT models 1020-0311 For 06 Dyna models 1020-0771 For 08 V-Rod models 1020-0312 For 02-07 V-Rod models 1020-0530 For 07-08 XL models

SUG. RETAIL $299.95 249.95 249.95 299.95 299.95 299.95 249.95 299.95

“CHEAP SHOT” FUEL TUNER •An economical solution to add needed fuel after installing exhaust and air cleaner performance upgrades •Simple splice-in design saves money by eliminating costly plug-and-play connectors •Load-based technology senses load on the engine in any riding situation to provide optimal fuel to the engine •Adjusts like a carburetor •Installation instructions included •Made in the U.S.A. NOTE: Not for legal road use in California. PART # 1020-0829 1020-0828 1020-0831 1020-0830

DESCRIPTION For 06-09 Dyna, 07-09 Big Twin For 95-06 Big Twin (except 06 Dyna) For 08 V-Rod For 02-07 V-Rod

SUG. RETAIL $149.95 149.95 149.95 149.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE 1020-0569 TUNER PLATE FRAMES EZFI •Add-on module is perfect for tuning situations that require just a little tweaking: only affects fuel delivery (not stock ECM/TSSM functions such TIRES, as ignition timing, turn signals, safety, instruments, etc.) TUBES & •Connects 1020-0952 to stock ECM WHEELS •Includes software and instructions 1020-0570 stock TSSM function HARDWARE, •Retains PART # DESCRIPTION SUG. RETAIL •Optional diagnostic cable available (PART #1020-0570) CHEMICALS •Made in the U.S.A. 1020-0569 For 01-09 Delphi 36-pin EFI-equipped Big Twin models (except 08-09 Touring models) $226.95 & TOOLS NOTE: Since the EZFI module does not control ignition timing, it is not 1020-0952 For 08-09 FLHT, FLHR, FLHX, FLTR models 224.95 recommended for engines with higher than stock compression ratios. COVERS, NOTE: Not legal for sale or use on pollution controlled vehicles. 1020-0570 Diagnostic cable 103.95 SECURITY & GENERAL NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturers’ information.

328

All part numbers in BOLD MAGENTA are new for 2010.


SECTION SLM FUEL-INJECTION MODULES

6

WINDSHIELDS

•Self-learning modules compensate for changing loads, weather conditions and altitude •Automatically re-calibrates and optimizes for modifications such as pipes, air intake and cams •Allows for better engine efficiency resulting in improved performance •Direct plug-in connections for throttle position sensor, crank position sensor and O2 sensors •Shock and vibration proof surface mount •PCB design allows for great durability •Reduces emissions and improves mileage •Costly dyno tuning sessions or downloading calibration files to a lap top are no longer needed •Simply plug it in and ride without having to re-flash the factory ECU

TOURING LUGGAGE

NOTE: Pre 07 applications include one O2 sensor and one O2 bung. 07-09 applications use factory installed O2 sensors. PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION FLHR/FLTR/FLT/FLHT/FLHX FXST/FLST For 95-05 FLHR/FLTR/FLT/FLHT 1020-1003 For 01-04 FXST/FLST $598.95 1020-1003 For 06 FLHR/FLTR/FLHT/FLHX 1020-1004 For 05-06 FXST/FLST 598.95 1020-1004 For 07 FLHR/FLTR/FLHT/FLHX 1020-1006 For 07-09 FXST/FLST 500.95 1020-1006 1020-1007 For 08-09 FLHR/FLTR/FLHT/FLHX FXD/FXDWG 1020-1003 For 04 FXD/FXDWG 598.95 V-ROD For 08-09 V-Rod 1020-1004 For 05 FXD /FXDWG 598.95 1020-1005 For 02-07 V-Rod 1020-1006 For 06-09 FXD/FXDWG 500.95 1020-1003 XL 1020-1005 For 07-09 XL 500.95

SUG. RETAIL $598.95 598.95 500.95 500.95 500.95 598.95

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

1020-1086

TRANSMISSION & DRIVELINE GASKETS & SEALS FUEL MANAGEMENT CONTROLLERS •Simple to use and understand system provides easy air/fuel ratio adjustment •No computer or dyno required •Tuning capabilities superior to Alpha N type controllers •Easily adjusts for modifications – intake, exhaust, cams, etc. •Easy push-button operation •Load-based operation •Three basic zones of operation, similar to a carburetor – one zone sets the ‘pilot jet’ for idle and cruise, another sets the ‘needle jet’ for acceleration and a third zone sets the ‘main jet’ for heavy loading and wide-open throttle •Plug and play installation •Uses OEM base code; does not scramble base code •Made in the U.S.A. NOTE: Not legal for street use in California. PART # DESCRIPTION 1020-1088 For 06 FXST/FLST models 1020-1089 For 07-10 FXST/FLST models 1020-1087 For 06-10 FXD/FXDWG models 1020-1090 For 06 FLHT, FLHR, FLHX, FLTR models 1020-1091 For 07 FLHT, FLHR, FLHX, FLTR models 1020-1092 For 08-09 FLHT, FLHR, FLHX, FLTR models 1020-1086 For 95-05 Big Twin models 1020-1093 For 02-07 V-Rod models 1020-1094 For 08-10 V-Rod models 1020-1095 For 07-10 XL models 1020-1096 For 99-07 Buell models

SUG. RETAIL $299.95 299.95 299.95 299.95 299.95 299.95 299.95 299.95 299.95 299.95 299.95

ELECTRICAL PRO TUNE III FUEL-INJECTION TUNER •This kit allows you to optimize your fuel settings to maximize driveability and performance – the Jardine Pro Tune III is as simple as plug it in and go •Load Based Technology with one number interface •Fuel control without altering the stock fuel map •Integrated buttons provide easy adjustment and on-the-fly tuning of fuel delivery •LED lights indicate either real time injector duty cycle or air fuel ratio •Will not interfere with motorcycle stock sensors and inputs •No laptop computers are required, nor are any complicated spread sheets with over 100 different settings, no internet downloads or dynamometer interfaces •Both Race-only applications as well as C.A.R.B.-approved versions available •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 08-09 BUELL 1125R W/ JARDINE SLIP-ON EXHAUST 1020-0963 Race only $310.95 1020-0964 C.A.R.B.-approved 310.95

WILD THINGS FUEL INJECTION CONTROLLER •Easy, affordable way to adjust your fuel-injection system to accommodate changes to your motorcycle’s exhaust system, air cleaner or internal engine components •Controller reads engine rpm, throttle position and engine load and has four separate adjustment circuits (called “pots”) to fine-tune the system •The green “pot” functions like the fuel mixture screw and pilot jet on a carburetor for adjusting light throttle operation through highway and cruising speeds •The yellow “pot” functions like an accelerator pump on a carburetor, adding fuel as the throttle as opened •The red “pot” functions like the main jet on a carburetor to add fuel on the top end PART # •The rpm “pot” adjusts at what rpms the green and yellow fuel adjustment settings stop and the red fuel adjustment setting takes over 1020-1116 •Plug-and-play installation; does not compromise the stock wire harness

1020-1116 DESCRIPTION For 95-05 Evolution and Twin Cam models w/ fuel injection

SUG. RETAIL $244.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturers’ information.

All part numbers in BOLD MAGENTA are new for 2010.

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

329


SECTION

6

WINDSHIELDS TOURING 1050-0151

LUGGAGE

1010-0236

SEATS & SISSY BARS

1011-0897

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING

1022-0029

1011-1721

52MM SINGLE-BORE THROTTLE BODIES/MANIFOLDS/AIR CLEANERS •Designed for riders seeking the greatest possible performance gains from their fuel-injected engines •By utilizing air column inertia and carefully timed gas dynamic pressure waves, the S&S VFI Tuned Induction systems ram additional air into the cylinders for increased mid-range torque •For maximum tunability and performance gains an S&S Variable Fuel-Injection (VFI) module is recommended (sold separately), but any compatible, programmable module with enough capability and tuning range can be used •Components must be purchased separately to complete a Single-Bore EFI assembly •Made in the U.S.A. PART # DESCRIPTION THROTTLE BODIES 1022-0029 For stock 01-05 EFI Big Twin and aftermarket models (Delphi-style) 1022-0030 For stock 95-01 EFI Big Twin and aftermarket models (Magneti-Marelli-style) MANIFOLDS 1050-0151 For 80”, 88”, 89”, 95”, 96”, 103” and 106” motors 1050-0152 For 116” motor TEARDROP AIR CLEANERS 1010-0236 Desperado style 1010-0237 Teardrop style

SUG. RETAIL

$674.95 849.95 124.95 124.95 208.95 208.95

PART # DESCRIPTION TUNED INDUCTION AIR CLEANERS 1010-0563 Aluminum (burnished) 1010-0564 Wrinkle powder coat 1010-0565 Chrome CHROME BRACKET KITS 1013-0041 For 95-09 Big Twin (except 08-09 Touring) w/ S&S single-bore fuel-injection REPLACEMENT PARTS 1011-1721 Teardrop-style air filter 1011-0897 Repl. VFI-style air filter, red (ea.) 1011-0898 Repl. VFI-style air filter, blue (ea.)

HANDLEBARS, CONTROLS & MIRRORS

1011-0898 SUG. RETAIL $230.95 241.95 251.95

251.95 16.95 48.95 48.95

1010-0015

CABLES 1050-0001

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1022-0037 1020-0027

® EFI THROTTLE BODIES AND MANIFOLDS FRAMES, THUNDERJET •Replaces the OEM throttle body and manifold SUSPENSION •Throttle bodies accept the OEM stock components, including injectors & FENDERS •Matching manifolds are available separately for various cylinder lengths •High-flow air cleaner assembly is also required (sold separately) FOOTRESTS •Air cleaner assembly PART #1010-0015 accepts air cleaner covers & LICENSE PART #DS-288949 and PART #DS-288951 (sold separately) PLATE FRAMES •Made in the U.S.A. NOTE: Will also fit round port Screamin’ Eagle heads. 1010-0268 TIRES, NOTE: Legal in California only for racing vehicles which may never be used upon a highway. TUBES & SUG. SUG. WHEELS PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL 06-10 DELPHI-EQUIPPED TWIN CAM (EXCEPT 08-10 DRESSER) FOR 01-05 DELPHI-EQUIPPED TWIN CAM (CONT) HARDWARE, FOR 1022-0037 54mm throttle body/manifold assembly $599.95 1050-0002 Manifold for 5.013”-5.016” length cylinders $199.95 CHEMICALS 1022-0038 60mm throttle body/manifold assembly 599.95 AIR CLEANER ASSEMBLIES FOR ALL THUNDERMAX EFI THROTTLE BODIES & TOOLS FOR 01-05 DELPHI-EQUIPPED TWIN CAM 1010-0015 Accepts 8” round Evolution-style cover (cover not included) 239.95 50mm throttle body 399.95 COVERS, 1020-0027 Accepts OEM Twin Cam “football” cover 1020-0028 54mm throttle body 399.95 1010-0268 SECURITY 1050-0001 Manifold for 4.937” length cylinders (stock length) 199.95 (cover not included) 217.95 & GENERAL

330

All part numbers in BOLD MAGENTA are new for 2010.


SECTION 1013-0003

1022-0020

6

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS

0706-0036

WILD THINGS™ THROTTLE BODY AND MANIFOLD •Let that engine breathe •Huge, 57mm straight-bore throttle body and high-flow manifold gives big increases in horsepower •All stock components bolt on to throttle body without modification •Uses the same air cleaner bolt pattern as stock •Allows use of stock cruise control •Require the use of throttle body accessories when installing a Wild Things throttle body and manifold •Re-shaped steel fuel supply tube for Softail models •Manifold spacer kit available for Dresser and Road King models •New split-flow high-volume fuel flow nozzles divide the fuel flow around the valve stem and guide •Directs fuel into the highest flow areas for the ultimate in fuel distribution •Flow enough fuel to feed even the nastiest street motors •Injectors can be used for stock 06-10 applications with 50mm throttle bodies •PART #1022-0044 requires purchasing Küryakyn intake flanges Part # 467 (available separately from Küryakyn) •Sold each •Engineered by Mike Roland SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION FOR 06-10 TWIN CAM DELPHI FUEL-INJECTED MODELS WILD THINGS™ THROTTLE BODY ACCESSORIES (EXCEPT 08-10 FLHT/FLHR/FLTR/FLHX) 1022-0043 57mm high-flow fuel injectors for 06-10 Twin Cam 1022-0044 Wild Things™ throttle body for stock intake ports $699.95 w/ Wild Things™ throttle body, 06-10 Twin Cam w/ stock throttle body (except 08-10 FLHT/FLHR/FLTR/ FOR 01-05 TWIN CAM DELPHI FUEL-INJECTED MODELS FLHX) or Screamin’ Eagle 50mm throttle bodies 1013-0003 Wild Things™ throttle body and manifold 1022-0056 Wild Things intake flanges for 99-05 Twin Cam for stock intake ports 624.95 0706-0036 Steel fuel supply tube for 01-05 Softail 1022-0019 Wild Things™ throttle body and manifold for 1.8” intake ports 624.95 1022-0020 Spacer kit for 02-05 Dresser and Road King models

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE SUG. RETAIL

GASKETS & SEALS ELECTRICAL

$89.95 84.95 11.95 42.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1022-0048 1022-0070

CABLES BRAKES

1022-0047

TANKS & OIL FILTERS DASHES & GAUGES

ELLIPTICAL HIGH-TORQUE THROTTLE BODY AND MANIFOLD KITS •Replace OEM throttle body and manifold •Provide quicker throttle response through elliptical intake track design •Wider manifold to fit most taller engines •Compatible with all OEM electrical components, including throttle position sensors, air control motors and fuel injectors •Available with or without electronic components (MAP sensor, fuel rails and injectors) •Made in the U.S.A. NOTE: Manifolds may require custom fitting based on intake port location. FOR 06-10 DELPHI EFI TWIN CAM MODELS (EXCEPT 08-10 FLHT/FLHR/FLHX/FLTR) PART # DESCRIPTION PART # DESCRIPTION SUG. RETAIL KITS W/ ELECTRONIC COMPONENTS KITS W/O ELECTRONIC COMPONENTS 1022-0049 62mm throttle body/manifold kit 1022-0050 62mm throttle body/manifold kit $767.95 1022-0047 58mm throttle body/manifold kit 1022-0048 58mm throttle body/manifold kit 719.95 1022-0070 53mm throttle body/manifold kit 719.95

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $1,747.95 1,638.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

331


SECTION

6

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS

1022-0062

1022-0067

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

BIG BORE THROTTLE BODIES 55MM MAXFLOW™ THROTTLE BODIES •Large plenum design maximizes midand high-rpm power •Specifically designed for larger cubic inch motors that require substantial airflow •Fully machined and ported internally for unparalleled flow •Feature a stainless steel shaft and spring •Equipped with a sealed double roller bearing for smooth throttle operation •Brass throttle blade and shaft resist deflection which helps maintain throttle position accuracy •Completely replaces OEM throttle body and manifold; fully compatible with OEM components •Made in the U.S.A. PART # 1022-0067 1022-0066

DESCRIPTION For 06-10 Twin Cam with Delphi EFI (except 08-10 FLHT, FLHR, FLHX, FLTR) For 01-05 Twin Cam with Delphi EFI

SUG. RETAIL $748.95 748.95

•Flow bench-tested and dyno-proven to deliver increased airflow, horsepower and torque •Fully machined and ported internally for unparalleled flow •Feature a stainless steel shaft and spring •Equipped with a sealed double roller bearing for smooth throttle operation •Brass throttle blade and shaft resist deflection which helps maintain throttle position accuracy •Completely replaces OEM throttle body and manifold; fully compatible with OEM components •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 06-10 TWIN CAM WITH DELPHI EFI (EXCEPT 08-10 FLHT, FLHR, FLHX, FLTR) 1022-0064 51mm $659.95 1022-0065 55mm 659.95 FOR 01-05 TWIN CAM WITH DELPHI EFI 1022-0062 51mm 599.95 1022-0063 55mm 599.95

ELECTRICAL 1022-0046

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

332

GAS IT FUEL INJECTION KIT •Allows the use of wild custom fuel tanks on 01-05 fuel-injected Delphi models •Relocates stock fuel pump, fuel pressure regulator, fuel filter and fuel level sending unit to underside of fuel tank (not included) •Includes steel weld-in plate, 3.75” x 8” aluminum manifold, all hardware and instructions •Tank bottom must be relatively flat to accommodate port installation •Requires vented tank or vented gas cap •Custom fabrication required •Made in the U.S.A. PART # 1022-0046

DESCRIPTION Gas It fuel injection kit

OEM PART # DESCRIPTION IF STARTING FROM SCRATCH, PURCHASE ALL OF THE FOLLOWING COMPONENTS FROM YOUR LOCAL H-D DEALER FOR 01-05 DELPHI SYSTEMS 27408-01 Fuel pressure regulator 61001-01 Fuel filter kit, includes clamps, o-ring, and hose. 62357-00 Fuel hose, fuel pump to filter 10222 Fuel hose clamps 75300-05 Fuel sender kit

SUG. RETAIL $399.95 OEM PART # DESCRIPTION IF STARTING FROM SCRATCH, PURCHASE ALL OF THE FOLLOWING COMPONENTS FROM YOUR LOCAL H-D DEALER FOR 01-05 DELPHI SYSTEMS (CONT) 72439-00B Connector assembly kit w/connector kit 62897-01B Pump assembly 62900-01B Fuel line, tank to intake 62189-01A Check valve assembly w/O-ring

O2 ENRICHMENT DEVICE 1020-0796

•Reduce your engine’s temperature between 20 to 30 degrees •Installs in a few minutes; simply plug in between the oxygen sensors and the OEM wiring harness •Recommended for models with high flow air intakes and exhausts •Sold in pairs PART # DESCRIPTION SUG. RETAIL 1020-0796 For 06 Dyna and all 07-10 models (except 08-10 Dressers) $88.95 1020-1151 For 07-08 Touring models and all 119.95 07-10 Big Twin Race (except 08-10 Dressers) 1020-1152 For 07-10 XL and 09-10 XR-1200 models 119.95

WIDE-BAND BOSCH O2 SENSOR •For use with air/fuel ratio meters PART # 1861-0521

All part numbers in BOLD MAGENTA are new for 2010.

DESCRIPTION Bosch O2 sensor

SUG. RETAIL $99.95


SECTION FUEL PUMP FOR FUELINJECTED CUSTOM BIKES

WINDSHIELDS

•Pump can be mounted in nearly any tank •Hollow mounting bolts secure the pump flange to the bottom of the tank and provide an outlet for wiring and pressurized fuel •In-tank fiber filter prevents contaminants from damaging the pump or clogging fuel injectors •Kit contains pump, in-tank filter, inlet hose, mounting hardware and instructions •Pump specifications: 58 psi, 17.7 gal/hr, 3A draw •Made in the U.S.A.

VFI CLOSED-LOOP SENSOR KIT

PART # DESCRIPTION SUG. RETAIL 1009-0007 Fuel-injected fuel pump for custom applications $565.95

PART # 1020-0824

TOURING

•Owners of existing S&S engines equipped with a Delphi®-style VFI system can update to closedloop operation by updating their module software via a download at the S&S website and then installing this closed-loop sensor kit •Kit includes two oxygen sensors, two weld-in exhaust bosses, an oxygen sensor wiring sub-harness, all required connectors and instructions •Made in the U.S.A. DESCRITION For 01-06 Delphi-style VFI modules

LUGGAGE SEATS & SISSY BARS EXHAUST SUG. RETAIL $304.95

HIGH-FLOW FUEL INJECTOR

DESCRIPTION For 06-10 Twin Cam w/ Wild Things throttle body, 06-10 Twin Cam w/ stock throttle body (except 08-10 FLHT/FLHR/FLTR/FLHX) or Screamin’ Eagle 50mm throttle bodies

FUEL/AIR SYSTEMS ENGINE

•Split-flow high-volume injector divides the fuel flow around the valve stem and valve guide •Results in superior fuel distribution for increased drivability and a horsepower increase •Flow enough fuel for even the most extreme street motors •Sold each PART # 1022-0043

6

TRANSMISSION & DRIVELINE

SUG. RETAIL

GASKETS & SEALS

$89.95

DS-289144

ELECTRICAL

DS-289284

DS-189001

2103-1002

1022-0021

LIGHTING

DS-289143 DS-289285

2103-1001

ELECTRONIC FUEL-INJECTION COMPONENTS

1022-0004

•All parts are OEM replacements •Check OEM parts manual for fitment and part number •Made in the U.S.A. PART # INJECTORS DS-289284

HANDLEBARS, CONTROLS & MIRRORS

DESCRIPTION

SUG. RETAIL

For 01-05 FXST, FLST, 02-05 FLT and 04-05 Dyna models; repl. OEM #27609-01 (32 lb. per hour) 2103-1001 For 99-01 FLT models (optional high flow, 31 lb. per hour) 1022-0009 For 01-05 FXST, FLST, 02-05 FLT and 04-05 Dyna models; repl. OEM #27609-01 (high flow, 47 lb. per hour) FUEL REGULATOR 1009-0005 For 95-99; repl. OEM #27219-95 (350 kPa) DS-289143 For 95-99; repl. OEM #27219-95 (300 kPa) AIR TEMPERATURE SENSOR DS-289144 For 95-05; repl. OEM #27270-95 ENGINE TEMPERATURE SENSOR DS-289285 For 99-10; repl. OEM #32446-99

$178.95 259.95

211.95 84.95 69.95 41.95 37.95

1050-0039

PART # DESCRIPTION BAROMETRIC PRESSURE SWITCH 1022-0018 For 95-98; repl. OEM #32424-95 (250 kPa) DS-189001 For 95-98; repl. OEM #32424-95 (100 kPa) THROTTLE POSITION SENSOR 2103-1002 For 01-05 FXSTI, FLSTI, FXSTDI, 02-05 FLT, FLHT and 04-05 Dyna models; repl. OEM #27629-01 1022-0021 For 06-10 Dyna, FXST, FLST and FLHT models; repl. OEM #27659-06 IDLE AIR CONTROL MODULE 1022-0004 For 01-05 FXSTI, FXSTSI, FXSTBI, FXSTDI, FLSTI, FLSTFI, 02-05 FLTRI, FLHRI, FLHRCI, FLHTCUI, 04-05 Dyna and 02-10 VRSC models; repl. OEM #27628-01 1022-0022 For 06-10 Dyna, FXST, FLST and 06-07 FLHT models; repl. OEM #27658-06 MAP SENSOR WITH SEAL 1050-0039 For 99-10 fuel-injected models (except 08-10 Dressers), 00-06 Big Twin Carb models and 04-06 XL; repl. OEM #32316-99

INDUCTION MODULE ASSEMBLY O-RING KIT •Kit contains fuel fitting O-rings •Made in the U.S.A. PART # DS-174988

1022-0022

DESCRIPTION For 95-01 FLT, FLHT, FLHR fuel-injected models; repl. OEM #17043-95

SUG. RETAIL $15.95

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $69.95 59.95

65.95 32.95

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

49.95 48.95

65.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

333


SECTION

6

WINDSHIELDS

DS-0452 1001-0018

TOURING

DS-0419

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

SUPER E AND G SHORTY CARBURETOR KITS

DS-0448

•Each carb kit includes an S&S Super E or Super G gas carburetor, S&S teardrop air cleaner assembly, manifold,(unless noted) mounting hardware, fuel line, clamps, overflow line, one extra intermediate jet and two main jets, VOES tubing (when applicable), installation and jetting instructions •Super E has a 17/8” (47.6mm) throat at the butterfly and a 19/16” (39.6mm) venturi and is recommended for use on Big Twin or Sportster engines up to 100-cubic-inch •Super G has a 21/16” (52.3mm) throat at the butterfly and a 13/4” (44.5mm) venturi and is recommended for use on 90-cubic-inch and larger high-performance and modified engines •21/16” G is not recommended for smaller, lower compression engines •If there is a doubt as to which carburetor to use, we suggest the 17/8” Super E •Carburetors only also available •Made in the U.S.A.

1002-0025

NOTE: S&S Super E & G carburetors require the use of a two-cable, pull open/pull close throttle assembly; S&S kits are compatible with stock cables except as noted.

NOTE: To use S&S Super E and Super G carb kits on Buell models, the stock throttle and idle cables must be changed. All 94-95 models, and the 96 S-2 and S-2T Thunderbolt (models that use Harley-style switches on 1” handlebars), should use throttle cable PART #DS-223533 and idle cable PART #DS-223534. All 96-02 S-1 Lightning, 97-01 S-3 and S-3T Thunderbolt, 97 S-2 and S-2T Thunderbolt and 97-02 M-2 Cyclone (models with European-style controls on 7/8” handlebars) will use throttle cable PART #DS-223529 and idle cable PART #DS-223530. IMPORTANT NOTE: Recommended for racing only, this carburetor is not legal for use in California on motor vehicles operated on public highways or in other states where similar pollution laws may apply. User must determine the suitability of the product for his or her use and assumes all risk and liability in connection therewith.

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

17/8” SUPER SUG. DESCRIPTION E CARB KIT RETAIL FOR BIG TWIN MODELS (INCLUDES MANIFOLD) For 99-05 Twin Cam DS-0452 $524.95 For 92-99 Evolution Big Twin DS-0419 519.95 For 84-91 Evolution Big Twin DS-0407 498.95 FOR BIG TWIN MODELS (NO MANIFOLD) For 92-99 Evolution Big Twin DS-0442 508.95 For 84-91 Evolution Big Twin DS-0440 498.95 PART # DESCRIPTION REPLACEMENT COMPONENTS 1002-0025 Super E carburetor only 1002-0026 Super G carburetor only 1011-1721 Repl. air cleaner element for E & G carbs DS-289404 Repl. S&S air cleaner cover for E & G carbs DS-289405 Repl. air cleaner screws (10-pk.)

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS CRUISE CONTROL ADAPTER KIT •Super Shorty carbs can easily be installed HARDWARE, on motorcycles equipped with stock H-D CHEMICALS cruise control all parts and instructions needed & TOOLS •Includes to complete installation COVERS, •Made in the U.S.A. DESCRIPTION SECURITY PART # For 98-06 Big Twin & GENERAL 1003-0022

334

21/16” SUPER G CARB KIT DS-0453 DS-0434 DS-0427

SUG. RETAIL $544.95 539.95 544.95

-

SUG. RETAIL $313.95 329.95 16.95 128.95 .95 (ea.)

17/8” SUPER SUG. 21/16” SUPER SUG. DESCRIPTION E CARB KIT RETAIL G CARB KIT RETAIL FOR XL MODELS (INCLUDES MANIFOLD) For 04-06 XL 1001-0018 $580.95 For 91-03 XL DS-0409 529.95 DS-0429 $544.95 For 86-90 XL DS-0408 521.95 DS-0428 534.95 FOR BUELL MODELS (INCLUDES MANIFOLD) For 94-02 Buell models DS-0448 575.95 -

VFI CRUISE CONTROL ADAPTER KITS

SUG. RETAIL $62.95

SUG. RETAIL

PART # DESCRIPTION REPLACEMENT COMPONENTS (CONT) 1011-0324 Repl. breather hose for 93-06 Big Twin and 91-03 XL 1011-0325 Breather screw seals (silicone-coated steel washer), .520” (10-pk.) 1011-0326 Breather screw seals (silicone-coated steel washer), .380” (10-pk.)

1003-0020

.95 (ea.) .95 (ea.)

1003-0019

•Cruise control adapter kits for S&S VFI Systems connect directly to stock cruise control cables •Made in the U.S.A. PART # DESCRIPTION 1003-0020 For 98-06 Evolution Big Twin and Twin Cam 1003-0019 For 93-97 Evolution Big Twin

All part numbers in BOLD MAGENTA are new for 2010.

$5.95

SUG. RETAIL $25.95 29.95


SECTION

6

WINDSHIELDS TOURING 42-18

LUGGAGE SEATS & SISSY BARS EXHAUST

42-8

TM42-6

TM42-6P

FUEL/AIR SYSTEMS

HSR42/45 “SMOOTHBORE” CARBURETOR KITS •Kits include the redesigned 42mm/45mm smoothbore carb in a natural finish •Easier, faster installation using stock CV throttle cables •Excellent throttle response, more power, improved acceleration and better gas mileage •Order fewer part numbers to cover more applications •Installation instructions and hardware included

42MM/45MM EASY KITS •Accept the original H-D intake manifold, choke cable, air cleaner and throttle cables •Keep the stock look of your bike •Recommend the use of a high-flow air filter designed for the stock CV carb

HSR42/45 CARBURETORS •For the high-performance engine builder who needs a carb for specific custom applications •Available in standard or highly-polished finishes

•Everything needed for a complete installation •Include performance intake manifold, rubber flange, 42mm or 45mm carb, high-flow K&N filter, air cleaner cover, breather kit and hardware •84-89 models require the use of 90-95 Big Twin-style cables SUG. RETAIL $358.95 488.95 418.95 548.95

EASY KITS PART # DESCRIPTION SUG. RETAIL 42MM 42-18 For 99-06 Twin Cam and 90-99 Evolution Big Twin (not for use with stock air cleaner; requires a hi-perf air cleaner, use stock air cleaner cover; may be used with a Screamin’ Eagle air filter kit; will not work with cruise control) $388.95 42-7 For 90-99 Evolution Big Twin (include chrome air cleaner cover; will not work with cruise control) 448.95 42-10 For 94-03 XL 1200 models (include special backing plate and hardware; use stock oval air cleaner cover and high-flow filter) 448.95 42-11 For 94-06 XL 1200 models and 94-02 Buell must use aftermarket air filter (include air filter adapter) 418.95 45MM 1002-0030 For 99-06 Twin Cam and 90-99 Evolution Big Twin (use stock air cleaner cover; may be used with a Screamin’ Eagle air filter kit; will not work with cruise control) 418.95 TOTAL KITS PART # DESCRIPTION 42MM CARB KITS 42-8 For 84-99 Evolution Big Twin (except 84-88 FLT) 42-19 For 99-06 Twin Cam 45MM CARB KITS 45-2X For 84-99 Evolution Big Twin (except 84-88 FLT) 45-4X For 99-06 Twin Cam

42-8

HSR48 CARBURETORS

SUG. RETAIL $578.95 608.95 658.95 658.95

48-2X

•These high-performance carbs are ideal for realizing the maximum potential from custom and race engines •Available in standard or highly-polished finishes •Both use stock H-D cables and come with a flange •For race and custom applications only PART # DESCRIPTION 48-2X 48mm carb, standard finish 48-2P 48mm carb, polished finish

TRANSMISSION & DRIVELINE GASKETS & SEALS

42/45MM TOTAL KITS

NOTE: Choke cable included, except for the TM42-6, which uses stock choke cable from CV-type carb. NOTE: Airbox adapter HS42/001-K must be ordered separately. PART # DESCRIPTION TM42-6 42mm carb, standard finish TM42-6P 42mm carb, polished finish TM45-2 45mm carb, standard finish TM45-2P 45mm carb, polished finish

ENGINE

REPLACEMENT FILTER ELEMENT SUG. RETAIL $448.95 588.95

•Replacement 21/2” or 3” filter element for HSR42/45/48 carburetor PART # DESCRIPTION HS42012-250 21/2” filter element HS42/012-300 3” filter element

All part numbers in BOLD MAGENTA are new for 2010.

SUG .RETAIL $74.95 74.95

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

335


SECTION

6

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

TOP GUN 48MM SINGLE MIKUNI CARB KIT •A must for big-inch motors •Legendary Rivera performance in a 48mm Mikuni carburetor-manifold kit •Includes Rivera’s all new proprietary super-flow intake manifold specifically designed for the large venturi 48mm Mikuni carburetor •Noticeably improves performance and gas mileage •Polished finish •Made in the U.S.A. NOTE: Use bracket PART #1013-0034 for bikes with cruise control. PART # DESCRIPTION 1001-0011 For 84-06 Evolution and Twin Cam motors

SUG. RETAIL $1,039.95

ENGINE TRANSMISSION & DRIVELINE

BENDIX CARBURETORS

GASKETS & SEALS

DS-289079

•High-performance Bendix carburetors are easy bolt-on replacements that need no extra fitting or linkage connections •Most offer adjustable high-speed jets; all provide improved acceleration and easier, quicker starts •Made in the U.S.A. NOTE: All Bendix carbs may be used for other applications, provided correct cables are used.

ELECTRICAL

PART # DS-289078

LIGHTING DS-289079

DS-289078

HANDLEBARS, CONTROLS & MIRRORS

DESCRIPTION SUG. RETAIL 40mm high-performance carb w/ adjustable main jet, standard finish, for all 84-89 Big Twin and 86-87 XL w/ dual-throttle cable linkage (will not fit models w/ CV carbs unless choke hook-up is fabricated, intake manifold purchased and cables modified) $445.95 Choke cable accessory kit (required for installation of 40mm carb on 84-89 Big Twin, 86-87 XL Evolution) 69.95

CABLES BRAKES TANKS & OIL FILTERS 38MM CARB KIT DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

336

•Kit includes carb, manifold adapter, hose clamps, throttle cable and two main jets, as well as a chrome front K&N air cleaner •Made in the U.S.A.

HIGH-PERFORMANCE CARB KIT

NOTE: Does not include manifold. PART # DS-289086

DESCRIPTION 38mm Mikuni carb kit for 84-89 H-D Evo models with single-cable throttle control

SUG. RETAIL $256.95

•Kit includes chrome-plated 40mm carburetor, fittings, adapters, accessories and installation instructions •Offers quicker starts and improved acceleration •Designed to fit OEM or performance air filters •Easy bolt-on installation PART # 1002-0001

DESCRIPTION For 90-99 Evolution Big Twin models

SUG. RETAIL $643.95

CRUISE CONTROL BRACKET FOR MIKUNI •Fits all years with Mikuni HRS42/45/48 using stock cables •Retains cruise control when adding a Mikuni/Screamin’ Eagle carb •Made in the U.S.A. PART # 1013-0034

DESCRIPTION For Mikuni HSR42/45/48 carbs

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $147.95


SECTION

6

WINDSHIELDS 2102-3008

EDELBROCK PERFORMER SERIES CARBURETORS •EPS carburetors feature an adjustable accelerator pump for instant throttle response and easier starting •Offer replaceable main jet for precise fuel metering for exceptional top-end performance; an idle air bleed system to set idle fuel independently from other circuits, and a flat needle for superior fuel atomization that allows external needle adjustment without carb disassembly •Sealed 440 stainless steel shaft gives smooth operation for a lifetime; hard anodized flat side makes for unsurpassed wear resistance •Float bowl features an O-ring sealed fuel banjo that rotates 180° for easy custom fuel-line routing; each carb is wet flow-tested for quality •Available in Quick Kits •Quick Kits are designed to be used with stock OEM manifolds, cables and air cleaners •Available in ball-burnished (plain) in 38 or 40mm sizes REPLACEMENT JET NEEDLES •Made in the U.S.A. PART # DESCRIPTION NOTE: Carbs for 88-03 XL, 90-06 Big Twins spigot mount; all others are flange mount. NOTE: Some 86 883 and 1100 XL models have extra-large cylinder fins, so carbs may need to be spaced or fins modified. PART # 38MM 2102-3008 2102-3010

DESCRIPTION

SUG. RETAIL

For 90-06 Big Twin and 88-03 XL For 70-89 Big Twin and 86-87 XL

$419.95 419.95

PART # 40MM 2102-3009 2102-3011

JET NEEDLES DS-289018 DS-289005 DESCRIPTION

SUG. RETAIL $17.95 17.95 SUG. RETAIL

For 90-06 Big Twin and 88-03 XL For 70-89 Big Twin and 86-87 XL

$419.95 419.95

SUG. RETAIL $862.95 901.95 905.95

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

1010-0082

NOTE: This setup may interfere with your leg if you are over six feet tall and your bike has forward pegs.

34mm dual-carb kit for 80”-95” engines 38mm dual-carb kit for 96”-113” engines 40mm dual-carb kit for 114”-up engines

SEATS & SISSY BARS

13-0 needle 15-0 needle

•Designed for 84-06 Big Twins (except Ultra) •Kit includes chrome-plated carbs, mounting hardware and fuel line •Perma-Star three-piece manifold sold separately •Dual-carb oval air cleaner has a billet-look aluminum top and a K&N 23/4” element (sold separately) •Replacement air filter PART # E-3325, SUG. RETAIL $34.95, for billet air cleaner also available •Made in the U.S.A.

DESCRIPTION

LUGGAGE

2102-3026

PERFORMER SERIES DUAL-CARBURETOR KITS, MANIFOLDS AND AIR CLEANER

PART # CARB KITS 2102-3025 2102-3026 2102-3027

TOURING

2102-3034 PART # DESCRIPTION DUAL-CARBURETOR BILLET AIR CLEANER 2102-3034 Billet air cleaner w/ K&N filter

SUG. RETAIL

ELECTRICAL

$279.95

LIGHTING

DUAL-CARB INTAKE MANIFOLDS APPLICATIONS

EDELBROCK AND TP HEADS (SQUARE INTAKE PORT)

STOCK AND S&S HEADS

99-06 Twin Cam std. 88”, 95” 84-99 Evolution Big Twin 80”, 88”, 89”, 96” 93” Evolution-style 107” Evolution-style 113” Evolution-style 121” Evolution-style 124” Evolution-style

2114-3003 DS-289237 1010-0009 1010-0009 1010-0011 1010-0082 -

2114-3004 DS-2892411 1010-0010 DS-289241 1010-0085

1

SUG. RETAIL $464.95 490.95 490.95 490.95 490.95 490.95 490.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

Except 88” with short S&S cylinders.

BRAKES MAIN JETS •Top-quality main jets for Performer carburetors •PART #1006-0241 is a kit that contains one of each 13 main jets #64-#88 •Made in the U.S.A. PART #

DESCRIPTION

SUG. RETAIL

PART #

DESCRIPTION

1006-0241 1006-0001 1006-0002 1006-0003 1006-0004 1006-0005 1006-0006

Main jet kit 64 main jet 66 main jet 68 main jet 70 main jet 72 main jet 74 main jet

$61.95 6.95 6.95 6.95 6.95 6.95 6.95

1006-0007 1006-0008 1006-0009 1006-0010 1006-0011 1006-0239 1006-0240

76 78 80 82 84 86 88

main main main main main main main

jet jet jet jet jet jet jet

SUG. RETAIL $6.95 6.95 6.95 6.95 6.95 6.95 6.95

AIR BLEEDS FOR EDELBROCK CARBS

TANKS & OIL FILTERS

•Top-quality air bleeds available in a variety of colors •Made in the U.S.A. PART #

SIZE

COLOR

1005-0001 1005-0002 1005-0003 1005-0004 1005-0005 1005-0006 1005-0007

20 25 30 35 40 45 50

Purple Black Gold Red Blue Green Orange

SUG. RETAIL $9.95 9.95 9.95 9.95 9.95 9.95 9.95

DS-223097

DS-223072

OPTIONAL ENRICHENER CABLE KITS

AIR CLEANER SPACER

•Made in the U.S.A. PART #

DESCRIPTION

DS-223097 16” side-mount enrichener cable kit DS-223073 Repl. cable for DS-223097 DS-223072 24” dash-mount enrichener cable kit

SUG. RETAIL $35.95 27.95 59.95

•For installing stock air cleaner and backing plate to an Edelbrock carburetor •Made in the U.S.A. PART #

DESCRIPTION

DS-223077

3

/8” (QS to CV bolt pattern) for 90-99 80” Big Twin, 88-03 XL

SUG. RETAIL $43.95

MIXTURE ADJUSTMENT TOOL •Replaces the mixture adjustment cover screw for easy, convenient adjusting •Made in the U.S.A. PART #

DESCRIPTION

DS-289199

Mixture adjustment tool

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $17.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

337


SECTION

6 DEALER

WINDSHIELDS STOCKING CARBURETOR PARTS KITS

TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

•Kits are designed to help dealers by making it easier for them to service S&S products •Jet kit 1003-0015 contains three each of all intermediate jets and five each of all main jets, plus a main jet tool 1050-0024 1003-0016 •Carburetor parts kit PART #1003-0016 contains 1003-0015 replacement parts for S&S Super E and G carbs •Dealer stocking parts kit PART #1050-0024 contains kits PART #s 1003-0015 and 1003-0016, plus a miscellaneous parts kit containing the most commonly needed gaskets and parts to service S&S oil pumps, as well as top end gaskets for S&S engines of various bore sizes •Come in durable hinged vinyl divider boxes that have labels on the inside cover for easy location, identification and reordering of parts •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1050-0024 Dealer stocking parts kit (contains kits 1003-0015 and 1003-0016 below) $1,423.95 1003-0015 S&S jet kit 300.95 1003-0016 S&S carburetor parts kit 322.95

112923

ENGINE TRANSMISSION & DRIVELINE

DS-289113 DS-289111

112903

GASKETS & SEALS ELECTRICAL

160057

160491

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

112084 1003-0056 1003-0196

CARBURETOR REBUILD KITS AND REPLACEMENT COMPONENTS •Rebuild kits are available in master kits, bodyonly kits and accelerator pump kits •Replacement gaskets, O-rings and components are made from the highestquality materials available •Made in the U.S.A.

DS-289183

1003-0195

DS-289185

REBUILD KITS

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

338

PART # 112923 112924 112903 DS-289111 DS-289112 DS-289113

DESCRIPTION Master rebuild kit Super E (body, accelerator pump, fasteners, springs, idle mixture screw, seat and needle assembly) Master rebuild kit Super G (body, accelerator pump, fasteners, springs, idle mixture screw, seat and needle assembly) Rebuild kit for Super B (body rebuild kit) Rebuild kit for Super E (body rebuild kit) Rebuild kit for Super G (body rebuild kit) Accelerator pump rebuild kit for E & G (diaphragm, spring, check balls and springs, pushrod and required hardware)

SUG. RETAIL $73.95 76.95 38.95 36.95 38.95 18.95

REPLACEMENT COMPONENTS PART # DS-289934 DS-289935 DS-289933 112091 160491 160492 160057 160357 DS-289183 DS-289185 1003-0039 1003-0085 1003-0040 1003-0041 1003-0042 1003-0043 1003-0044 1003-0045 1003-0047 1003-0049 1003-0050 1003-0051 1003-0052 1003-0054

DESCRIPTION Manifold to carburator O-ring, Super G (10-pk.) Manifold to carburator O-ring, Super E (10-pk.) Bowl gasket, Super E and G (10-pk.) Bowl gasket, Super B and D (10-pk.) 1/4” Insulator block w/ O-ring Super E 1/4” Insulator block w/ O-ring Super G 1” Spacer block Super E 1” Spacer block Super G Gas line insulator 19” gas line Idle speed/pump adjuster spring (10-pk.) Idle mixture screw (5-pk.) Idle mixture screw spring (10-pk.) Bowl plug (5-pk.) Needle: 17/8” E & 21/16” G (ea.) Bellows seal, accelerator pump (5-pk.) Diaphragm spring, accelerator pump (10-pk.) Accelerator pump diaphragm (ea.) Fast idle plunger/enrichener (ea.) Accelerator pump pushrod (5-pk.) Ball check spring (5-pk.) Accelerator pump cap assembly (ea.) Fuel inlet/seat for 17/8” E & 21/16” G carb (uses needle 1003-0042) (10-pk.) Shim kit 5/16” i.d. breather (12-ct., various sizes)

SUG. RETAIL (EA.) $.95 .95 2.95 1.95 10.95 10.95 35.95 55.95 9.95 5.95 .95 7.95 .95 1.95 10.95 3.95 .95 12.95 10.95 4.95 1.95 21.95

PART # 1003-0055 1003-0056

10.95 8.95

1003-0188

1003-0057 1003-0058 112084

1003-0195 1003-0196 1003-0189 1003-0186 1003-0191 1003-0187 1003-0190 1003-0185 1003-0192 1003-0194 1003-0193

DESCRIPTION SUG. RETAIL (EA.) Shim kit 1/2” i.d. breather (12-ct., various sizes) $14.95 Breather conversion kit for Big Twin (converts early S&S air cleaners to new-style breather hardware) 30.95 Bowl screws: 10-24 x 2 3/8” (10-pk.) .95 Pump cap screw 8-32 (10-pk.) .55 Enrichment device for B series carb (will work on Super E & G carbs when changing air cleaners) (ea.) 31.95 Throttle cable guide/bracket for use w/ CV (constant velocity) cables (ea.) 10.95 Throttle cable guide/bracket for use w/ butterfly cables (ea.) 10.95 Throttle plate screw (two required) (10-pk.) .95 Throttle return spring (5-pk.) 1.55 Throttle shaft lock washer (two required) (10-pk.) .45 Throttle shaft nut (two required) (5-pk.) 1.55 Throttle shaft nylon washer (10-pk.) .45 Accelerator pump spring (5-pk.) 1.55 Accelerator pump ejector nozzle O-ring (10-pk.) .95 Accelerator pump ball check spring (5-pk.) .55 Accelerator pump cap O-ring (two required) (10-pk.) .95 Fuel bowl overflow hose 24” long (5-pk.) 4.55

All part numbers in BOLD MAGENTA are new for 2010.


SECTION ALI BABA ENRICHENER KNOB 0657-0003

ENRICHENERS WITH KNOBS •Enricheners with eye-catching chrome knobs •Replaces the existing enrichener when changing to a different style air cleaner •Available in several styles •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR S&S SUPER E & G CARBS 0657-0003 Spike $49.95 0657-0004 Flat Top 49.95

0657-0005

PART # 0657-0001

TOURING SUG. RETAIL $44.95

0657-0017

•Replaces enrichener lever on S&S carbs •Perfect for custom applications •Made in the U.S.A.

DESCRIPTION For S&S E and G choke knob

SUG. RETAIL $38.95

S&S ENRICHENER LEVER COVER

PART # 0657-0017 0657-0018

DESCRIPTION Gothic back cut cross Back cut knob

SUG. RETAIL $34.95 34.95

PART # DS-289278 0657-0006

ENRICHENER KNOBS 0657-0012

DESCRIPTION

0657-0013 SUG. RETAIL

Warrior Cusader Cross

$34.95 34.95

ENRICHENER LEVER COVER FOR S&S CARBS

SUG. RETAIL $32.95 32.95

DESCRIPTION Joker Hot Head

PART # 0657-0008

0657-0006 0657-0008

DESCRIPTION 7-Out

SUG. RETAIL $32.95

•Unique design replaces the S&S enrichener lever on E and G carbs •Matches Thunder Cycle’s crankcase engine breathers •Made in the U.S.A.

DESCRIPTION Enrichener lever cover

DESCRIPTION For use w/ custom air cleaners and velocity stacks

SUG. RETAIL $67.95

EXTENDED FLOAT BOWL AND FOAM CELL

PART # DESCRIPTION SUG. RETAIL FOR S&S SUPER D CARBURETOR 1004-0002 Extended float bowl $199.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

SUG. RETAIL $9.95

•Increase float bowl capacity to 160cc and the float bowl won’t go dry during full-throttle passes •Sold in a kit with extended main jet emulsion tube •Use with foam cell PART #1050-0045 (sold separately) to prevent fuel slosh at high G-forces •Foam cell installs over the extended emulsion tube and is held down by a retainer plate •Made in the U.S.A.

GASKETS & SEALS

LIGHTING

•Die-cast chromeplated cover for the enrichener lever on S&S E and G carbs •Comes with its own wrench and two setscrews PART # DS-289038

TRANSMISSION & DRIVELINE

ELECTRICAL

ENRICHENER KNOB

PART # 2103-0501

FUEL/AIR SYSTEMS ENGINE

•Replaces the enrichener lever on S&S E and G model carbs DS-289278 •A must-have for custom applications •Made in the U.S.A.

PART# DESCRIPTION SUG. RETAIL DS-289039 Enrichener lever cover $10.95

•Billet aluminum construction •Made in the U.S.A.

EXHAUST 0657-0018

ENRICHENER KNOB FOR S&S CARBS

•This unique chrome cover fits over the enrichener lever on S&S E and G carbs •Comes with hex key and an extra stainless steel setscrew

LUGGAGE SEATS & SISSY BARS

ENRICHENER KNOBS FOR S&S CARBS

•CNC-machined billet aluminum with a polished finish •Replaces the stock enrichener lever •Made in the U.S.A.

PART # FOR S&S E/G CARBS 0657-0012 0657-0013

DESCRIPTION Ali Baba enrichener knob

PART # DESCRIPTION SUG. RETAIL FOR S&S SUPER E & G CARBS (CONT) 0657-0005 Power Flow $49.95

S&S ENRICHENER KNOB

PART # 7805-0004

WINDSHIELDS

•Beautifully chromed aluminum enrichener knob •Replaces the plastic knob on most carbs by using the included setscrew •Knob can also be screwed on to 10/32 threaded cables •Matching points cover, derby cover and head bolt covers available separately •Made in the U.S.A.

0657-0004

6

1004-0002

HOTOP S&S ENRICHENER KNOB ASSEMBLY

PART # DS-289138

DESCRIPTION Enrichener knob assembly

1050-0045

PART # DESCRIPTION SUG. RETAIL FOR S&S SUPER D CARBURETOR (CONT) 1050-0045 Foam cell and retainer 32.95

-6AN FUEL LINE FITTING FOR S&S CARBS •Allows the use of -6AN fittings and fuel line for fuel supply •For all S&S Super E and G series carbs •Used with Pingel fuel valves PART #DS-390285 (22mm inlet) and PART #0705-0058 (3/8” NPT inlet); and The Guzzler® fuel valves PART #s 0705-0029/0705-0050 (22mm inlet) and PART #s 0705-0028/0705-0056 (3/8” NPT inlet) PART # DESCRIPTION SUG. RETAIL •Sold each -6AN fuel fitting $32.95 •Made in the U.S.A. DS-289141

BRAKES

•Replaces the stock S&S enrichener lever on E and G carbs when changing to a different style air cleaner assembly •Retains the stock plunger and spring •Set screw allows progressive enrichment •Kit includes a chrome knob and a brass plunger nut •Made in the U.S.A.

TANKS & OIL FILTERS

SUG. RETAIL $41.95

Removal Tool 1050-0123

HI-FLOW FUEL NIPPLES

1050-0208

•Flows more fuel than the stock OEM nipples 1050-0124 1050-0209 •Available in single- and dual-carb setups •Also works with nitrous oxide or wherever an extra fuel line is needed •Eliminates the need for a dual-outlet fuel petcock •Includes removal tool •Made in the U.S.A. PART # DESCRIPTION FOR ALL 76-06 KEIHIN CARBURETORS (BUTTERFLY AND CV) 1050-0123 Single outlet (brass) 1050-0208 Single outlet (stainless-steel) 1050-0124 Dual outlet (brass) FOR ALL MIKUNI HSR CARBS 1050-0209 Single outlet (stainless-steel)

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $42.95 47.95 42.95 47.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

339


SECTION

6 H42/001-K

WINDSHIELDS TOURING

990-662-002

HSR48 MAIN JET EXTENSION KIT

LUGGAGE

•Increases amount of fuel to float bowl •Completely submerges main jet within extender, eliminating chance of air bubbles getting though PART # DESCRIPTION SUG. RETAIL 1006-0248 HSR48 main jet extension kit $24.95

SEATS & SISSY BARS

REPLACEMENT PARTS FOR HSR 42/45 CARB KITS PART # HS42/001-K 990-605-065 990-662-002

DESCRIPTION Air box adapter w/ three mounting screws Short idle screw adjuster Choke cable, for use with Mikuni plastic nut, spring and brass plunger

SUG. RETAIL $18.95 14.95 22.95

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

KHS-016

ELECTRICAL GENUINE BENDIX CARB REBUILD KITS •Rebuild kit includes all necessary gaskets, seals, idle screw and accelerator pump PART # DESCRIPTION DS-289084 40mm Bendix rebuild kit for 84-89

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS

SUG. RETAIL $57.95

KHS-031

CARBURETOR REBUILD KIT •Includes all the parts needed to rebuild HSR42/45 or HSR48 carburetors PART # DESCRIPTION KHS-016 HSR42/45 Carb rebuild kit KHS-031 HSR48 Carb rebuild kit

SUG. RETAIL $39.95 39.95

DS-289109

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS CARB REBUILD KITS FOR KEIHIN CV HARDWARE, •For use with all 90-06 Big Twin or 88-06 XL models CHEMICALS using the CV carb all the necessary needles, O-rings, etc. for & TOOLS •Includes a complete rebuild DESCRIPTION COVERS, PART # For all 88-06 CV carbs (James) SECURITY DS-289109 For all 88-06 CV carbs (imported) & GENERAL DS-289098

340

CARB REBUILD KIT FOR STANDARD KEIHIN •Includes the parts necessary for rebuilding Keihin carbs •Feature Viton (not neoprene) needles PART # DESCRIPTION DS-289089 For 84-89 H-D; repl. OEM #27006-76

SUG. RETAIL $37.95 14.95

SUG. RETAIL $16.95

ACCELERATOR PUMP BOOTS PART # DESCRIPTION SUG. RETAIL (EA.) DS-289105 For Keihin carbs (5-pk.); repl. OEM #27311-76 $1.95

All part numbers in BOLD MAGENTA are new for 2010.


SECTION 1013-0005

1013-0004

DS-173537

DS-174381

6

WINDSHIELDS TOURING

1013-0006

CARBURETOR SPACERS •Easy way to add extra torque and horsepower •Machined from solid 6061 T-6 billet aluminum that completely eliminates porosity problems •Machined finish can be polished to a bright luster •Made in the U.S.A. PART # DESCRIPTION FOR S&S E & B SERIES CARBURETORS (17/8”) 1013-0004 1” 1013-0005 11/2” 1013-0006 2” FOR S&S G & D SERIES CARBURETORS (21/16”) 1013-0007 1” 1013-0008 11/2” 1013-0009 2”

CARBURETOR AND INTAKE MANIFOLD SEAL KITS

SUG. RETAIL $33.95 39.95 39.95 33.95 39.95 39.95

LUGGAGE

•Kits contain carb-to-intake seal and two intake-to-cylinder head seals unless noted PART # DESCRIPTION SUG. RETAIL DS-174381 40mm seal kit for 99-06 Twin Cam, 90-99 80” Evolution and 88-06 XL w/ OEM carbs $11.95 DS-173537 44mm seal kit for 99-06 Twin Cam, 90-99 80” Evolution and 88-06 XL w/ Screaming Eagle carbs 11.95 0935-0084 1660 Edelbrock manifold seal kit; repl. OEM # 27002-E1660 6.95 0935-0085 1671 Edelbrock manifold seal kit; repl. OEM # 27002-E1671 6.95 0935-0086 Ramjet rigid mount manifold seal kit; repl. OEM 27002-89R 6.95

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

DS-289075

ENGINE TRANSMISSION & DRIVELINE

DS-289076

1007-0157

GASKETS & SEALS

CARBURETOR INSULATOR BLOCK KITS DS-289120

DS-289121

THE ORIGINAL “POWER TUBE” ATOMIZER •Atomizer power tube and jets are CNC-machined from brass for consistency and accuracy •Power tube jet kits provide fine tuning with increased horsepower when using a less restrictive air cleaner and exhaust •Converts fuel from a squirting liquid to a fine mist •Eliminates spitting and popping through the carburetor •Master kits include slow jets, main jets, slide spring, drill bit and needles •Made in the U.S.A.

•Kits include 3/8” fiber insulator block and gaskets •Designed to reduce the risk of boiling fuel in the carb •Made in the U.S.A. PART # DESCRIPTION DS-174889 For custom applications; 113/16” i.d. w/ 3/8” mounting holes 2011-1214 For custom applications; 1.86” i.d. w/ 23/4” center-to-center mounting holes 2011-1215 For custom applications; 2.06” i.d. w/ 3” center-to-center mounting holes 0935-0099 For carb to intake (Screamin’ Eagle); repl. OEM #29250-99

SUG. RETAIL

ELECTRICAL

$18.95 18.95 18.95 22.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

NOTE: Covered under the following U.S. patent #s: 5,233,180/5,562,868/5,6 62,836/5,810,264/6,270,060. PART # DS-289076 DS-289083 DS-289075 1007-0157 DS-289121 DS-289120

DESCRIPTION Performance master kit for 88-06 stock 40mm CV carbs Performance master kit for 99-06 Screaming Eagle 44mm CV carbs Power Tube for HSR 42 and 45 w/ jets Power Tube for HSR 42 and 45 (w/o jets) Power Tube for 88-95 stock CV carbs (Big Twin, XL, Buell) Power Tube for S&S B, D, E and G series carburetors

SUG. RETAIL

BRAKES

CV JET KIT $105.95 105.95 60.95 56.95 85.95 47.95

•Recalibrate your stock CV carb to make the most out of the air cleaner, exhaust and cam changes or head work •Kit contains a #5 MAHR needle, 08BOO jet holder, #45, #48 and #50 slow jets, and #190, #195, #200 and #205 main jets •Suggested jetting guidelines are included with the kit •Made in the U.S.A.

TANKS & OIL FILTERS DASHES & GAUGES

NOTE: Not for use on pollution-controlled vehicles used on streets or highways. PART # DS-195100

DESCRIPTION For 99-06 Twin Cam

SUG. RETAIL $56.95

DS-289331

NO-HASSLE JET KITS FOR CV CARBURETORS •Genuine Keihin parts •Includes two slow jets, three main jets and a jet needle •No need for drilling •Detailed instructions for jetting your motor from stock to modified PART # DS-289331 1007-0015 DS-289332 DS-289334 DS-289333 DS-196002

DESCRIPTION SUG. RETAIL For 90-99 Evolution Big Twin $39.95 For 04-06 XL 883/1200 38.95 For 88-03 XL 1200 (except 97-03 1200S) 39.95 For 97-03 XL1200S, 94-98 Buell S1, S2/S2T, S3/S3T and M2 39.95 For 88-03 XL 883 39.95 Keihin slow jet screwdriver 15.95

RECALIBRATION KIT FOR 40MM KEIHIN CV CARB •Super high-quality recalibration kit for CV carbs •Kit has all the components for dialing in a CV carb with or without an accelerator pump PART # DESCRIPTION DS-289304 For all 88-99 CV carbs (except Twin Cam)

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $37.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

341


SECTION

6 DS-289306

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

RECALIBRATION KITS •Recalibrate your stock Keihin CV carb to make full use of the performance potential •Include the jets, needles, instructions, etc. necessary to recalibrate stock engines with CV carbs •Kits provide broad-range performance gains and maintain stock driveability PART # DS-290347 DS-290148 DS-289306 DS-289303 DS-289450 1007-0001 DS-289451 1007-0002 DS-289301 DS-289309 DS-290348

DESCRIPTION For 00-06 Twin Cam For 99 Twin Cam For 96-99 80” Big Twin and 96-03 XL For 90-95 Big Twin, XL 883, 1200 For 89-03 XL 883 “race only” For 04-06 XL 883 For 98-03 XL1200 Sport For 04-06 XL 1200 For Buell Lightning S1 For 99-02 Buell M2 Cyclone For 00-02 Buell blast

SUG. RETAIL $96.95 96.95 96.95 96.95 96.95 96.95 96.95 96.95 96.95 96.95 96.95

STAGE 1 JET KIT •Designed for motorcycles with stock engines using stock airbox, air filter and stock or aftermarket exhaust •Non-accelerator pump models •Fully adjustable to allow for the use of well-designed aftermarket exhausts and stock replacement air filter •Improves throttle response and driveability •Power increases of approximately 5% throughout the entire power range PART # DESCRIPTION SUG. RETAIL DJ-8101 88-89 XL 883/1200 models $96.95

DS-289307 DS-290356

ENGINE

THUNDERSLIDE JET KITS

STAGE 7 THUNDERSLIDE TRANSMISSION WITH JET KITS

& DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING

HANDLEBARS, CONTROLS & MIRRORS

•Stage 7 kits are for 80 plus horsepower engines and include a taller carburetor top for more slide movement •Revolutionary composite plastic slide provides unparalleled performance gains in both horsepower and mileage •Unique set of lift holes moderate how the slide moves with respect to throttle position; the faster the slide opens, the quicker the throttle response •Kits include jets, needles, clips, carburetor top and other necessary parts for CV carbs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-290356 For 00-06 Twin Cam $164.95 DS-290352 For 90-99 Big Twin Evolution 164.95 DS-290351 For Screamin’ Eagle 44mm Keihin CV Twin Cam 88 164.95 DS-290350 For Screamin’ Eagle 44mm Keihin CV Evolution 164.95

•Designed for engines with stock or aftermarket air filter and exhaust system •Revolutionary composite plastic slide provides unparalleled performance gains in both horsepower and mileage •Unique set of lift holes moderate how the slide moves with respect to throttle position; the faster the slide opens, the quicker the throttle response •Kit also includes jets, needles, clips and other necessary parts for CV carbs •Made in the U.S.A. PART # DS-290349 DS-290149 DS-289307 DS-289308 DS-289454 1007-0005

CABLES

DESCRIPTION For 00-06 Twin Cam For 99 Twin Cam For 90-99 Evolution Big Twin For 89-03 XL 1200 (not Sport) (Stage 1) For 98-03 XL 1200 Sport (Stage 1) For 04-06 XL 1200/C/R

1007-0156

SUG. RETAIL $149.95 149.95 149.95 149.95 149.95 149.95

1007-0155

BRAKES 1007-0154

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS CARBURETOR JET KITS FOOTRESTS •Designed to recalibrate OEM stock & LICENSE carburetors for use with Vance & PLATE FRAMES Hines exhaust systems •Include complete needle assemblies with five ranges of TIRES, adjustment, main jets, clips, TUBES & washer and appropriate drill bits WHEELS •Include detailed instructions for HARDWARE, easy installation SUG. CHEMICALS RETAIL & TOOLS PART # DESCRIPTION V22827 For 00-06 Twin Cam models $97.95 COVERS, SECURITY V22831 For Buell 00-05 Blast 97.95 & GENERAL

342

THUNDERJET AND THUNDERPRO THUNDERJET •ThunderJet’s patented third fuel circuit delivers needed fuel to the engine only at higher rpm (4,500 and up) •Allows use of the main jet to tune for smooth, broad mid-range power – supplement the top-end with the ThunderJet •Jets are used to control the amount of fuel sent to the engine •Comes with complete installation/tuning instructions and extra jets •The system can operate over a wide range of altitude and atmospheric conditions •ThunderPro ThunderJet is designed for today’s larger-displacement engines, with a higher capacity fuel delivery tube for increased volume when used in larger, high-rpm engines •Made in the U.S.A. NOTE: Some machining of carb body is required. NOTE: Legal in California only for racing vehicles which may never be used upon a highway. PART # DESCRIPTION THUNDERJET KITS FOR KEIHIN CV CARBS 1007-0152 Natural aluminum 1007-0153 Polished DS-289295 Red DS-289296 Blue DS-289297 Black

SUG. RETAIL $65.95 82.95 65.95 65.95 65.95

PART # DESCRIPTION SUG. RETAIL THUNDERJET KITS FOR S&S E AND B CARBURETORS 1007-0150 Polished $82.95 1007-0151 Natural aluminum 65.95 DS-289298 Red 65.95 DS-289299 Black 65.95 DS-289300 Blue 65.95

PART # DESCRIPTION SUG. RETAIL THUNDERJET PRO KITS FOR S&S G AND D CARBS 1007-0154 Polished $89.95 1007-0155 Natural aluminum 77.95

PART # DESCRIPTION SUG. RETAIL THUNDERJET PRO KITS FOR S&S G AND D CARBS (CONT) 1007-0156 Black $77.95

All part numbers in BOLD MAGENTA are new for 2010.


SECTION 1007-0339

WINDSHIELDS

1007-0336

JET KITS FOR S&S CARBS 1007-0338

CV JET KITS

•Complete kits with everything needed to make CV carbs run perfectly •PART #1007-0336 contains the following: needle (NOKH); slow jets (#165, #170, #175, #180); main jets (#45, #48) •PART #1007-0337 contains the following: needle (NOKH); slow jets (#180, #185, #190); main jets (#45, #48) •PART #1007-0338 contains the following: holders (08 B00); needles (NOKG, #5 MAHR); slow jets (#170, #175, #180, #185, #190, #195, #200, #205); main jets (#45, #48, #50) •PART #1007-0339 contains the following: holder (08 B00); needles (#5 MAHR); slow jets (#190, #195, #200, #205); main jets (#45, #48, #50) •All kits include instruction sheet PART # 1007-0336 1007-0337 1007-0338 1007-0339

DESCRIPTION For 88-03 XL For 04-06 XL For 95-06 EVO/Twin Cam For 99-06 Twin Cam

SUG. RETAIL $57.95 52.20 69.95 64.95

CV MAIN JET KIT •Kit contains 195, 200, 205, 210, 215 and 220 main jets •Made in the U.S.A. PART # DS-289186

DESCRIPTION For CV carbs on 90-06 Big Twin and 88-06 XL models

SUG. RETAIL $19.95

MAIN JETS FOR CV-TYPE KEIHIN CARBS •Precision-made in Japan •Master jet kit consists of 14 five-packs, includes all jets listed below from #140 to #205; you furnish box •Individual main jets sold in five-packs SUG. PART # DESCRIPTION RETAIL FOR 90-06 BIG TWIN AND 88-06 XL DS-289538 Master jet kit $2.95 DS-289533 #140 main jet 2.95 DS-289534 #145 main jet 2.95 DS-289535 #150 main jet 2.95 DS-289536 #155 main jet 2.95 DS-289321 #160 main jet 2.95 DS-289322 #165 main jet 2.95 DS-289323 #170 main jet 2.95

PART # DESCRIPTION FOR 90-06 BIG TWIN AND 88-06 XL (CONT) DS-289324 #175 main jet DS-289325 #180 main jet DS-289326 #185 main jet DS-289327 #190 main jet DS-289328 #195 main jet DS-289329 #200 main jet DS-289537 #205 main jet

SUG. RETAIL

$2.95 2.95 2.95 2.95 2.95 2.95 2.95

PILOT JETS FOR KEIHIN CARBS •Available for both styles (butterfly and CV) of Keihin carbs 76-06 •Precision-made in Japan •Master kit for CV-style consists of nine fivepacks, includes all jets listed below from #40 to #54; you furnish box •Individual pilot jets sold in five-packs SUG. PART # DESCRIPTION RETAIL CV-STYLE CARB; 90-06 BIG TWIN AND 88-06 XL DS-289542 Master jet kit $2.95 DS-289315 #40 pilot jet 2.95 DS-289316 #42 pilot jet 2.95 DS-289317 #44 pilot jet 2.95 DS-289318 #45 pilot jet 2.95 DS-289319 #46 pilot jet 2.95 DS-289320 #48 pilot jet 2.95 DS-289539 #50 pilot jet 2.95 DS-289540 #52 pilot jet 2.95 DS-289541 #54 pilot jet 2.95

6

SUG. PART # DESCRIPTION RETAIL BUTTERFLY-STYLE CARB; 76-89 BIG TWIN AND 76-87 XL DS-289310 #50 pilot jet $2.95 DS-289311 #52 pilot jet 2.95 DS-289312 #54 pilot jet 2.95 DS-289313 #56 pilot jet 2.95 DS-289314 #58 pilot jet 2.95

•For jetting most stock and performance engines •Low-range kit contains one each of the following intermediate jets (.025, .0265, .028, .0295) and one each of the following main jets (.062, .064, .066, .068, .070, .072, .074) •High-range kit contains one each of the following intermediate jets (.0295, .031, .032. .033) and one each of the following main jets (.072, .074, .076, .078, .080, .082, .084) •Dealer jet kit contains three each of all intermediate jets (except 10050008 and 1005-0009) and five each of all main jets (except 1006-0233, 1006-0234, 1006-0235, 1006-0236, 1006-0237 and 1006-0238) plus a main jet tool •Replacement jets also available separately •Made in the U.S.A. PART # JET KITS DS-0450 DS-0451 1003-0015 INTERMEDIATE JETS DS-94025 DS-940265 DS-94028 DS-940295 DS-94031 DS-94032 DS-94033 1005-0008 1005-0009 MAIN JETS 1006-0228 1006-0229 1006-0230 1006-0231 1006-0232 1006-0233 1006-0234 1006-0235 1006-0236 1006-0237 1006-0238 DS-72062 DS-72064 DS-72066 DS-72068 DS-72070 DS-72072 DS-72074 DS-72076 DS-72078 DS-72080 DS-72082 DS-72084

DESCRIPTION Low-range kit High-range kit Dealer jet kit

$43.95 43.95 295.99

.025 intermediate jet (3-pk.) .0265 intermediate jet (3-pk.) .028 intermediate jet (3-pk.) .0295 intermediate jet (3-pk.) .031 intermediate jet (3-pk.) .032 intermediate jet (3-pk.) .033 intermediate jet (3-pk.) .036 intermediate jet (3-pk.) .040 intermediate jet (3-pk.)

8.95 8.95 8.95 8.95 8.95 8.95 8.95 8.95 8.95

.040 main jet (5-pk.) .042 main jet (5-pk.) .044 main jet (5-pk.) .046 main jet (5-pk.) .048 main jet (5-pk.) .050 main jet (5-pk.) .052 main jet (5-pk.) .054 main jet (5-pk.) .056 main jet (5-pk.) .058 main jet (5-pk.) .060 main jet (5-pk.) .062 main jet (5-pk.) .064 main jet (5-pk.) .066 main jet (5-pk.) .068 main jet (5-pk.) .070 main jet (5-pk.) .072 main jet (5-pk.) .074 main jet (5-pk.) .076 main jet (5-pk.) .078 main jet (5-pk.) .080 main jet (5-pk.) .082 main jet (5-pk.) .084 main jet (5-pk.)

5.95 5.95 5.95 5.95 5.95 5.95 5.95 5.95 5.95 5.95 5.95 5.95 5.95 5.95 5.95 5.95 5.95 5.95 5.95 5.95 5.95 5.95 5.95

1050-0172

IDLE AIR ADJUSTING SCREWS FOR ALL CV CARBURETORS •Knurled and slotted head for easy adjustment •Includes brass or stainless-steel screw, O-ring, washer and spring •Made in the U.S.A. PART # 1050-0172 1050-0207

SUG. RETAIL (EA.)

1050-0207

DESCRIPTION Brass screw Stainless-steel screw

SUG. RETAIL $29.95 29.95

40MM CV VACUUM PISTON •Made in the U.S.A. NOTE: No warranty on rubber diaphragm. PART # DESCRIPTION 2101-0008 For 88-06 40mm carb; repl. OEM #27585-88

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $41.95

TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

343


SECTION

6

PRECISION MAIN JETS WINDSHIELDS RD •Brass carburetor jets are high precision and flow-calibrated for

TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

344

extremely accurate fuel flow rate •Available in a range of sizes for Mikuni and Keihin applications •High-quality replacement; NOT original Mikuni or Keihin jets •Individual jet sizes sold in 4-pack to dealers, sold each to consumer •Dealer kits that include a range of sizes also available DEALER JET KITS PART # TYPE 1006-0012 Mikuni-style slot head (SJ prefix) 1006-0013 Mlkuni-style hex head (HJ prefix) 1006-0014 Mikuni-style hex head (HJ prefix) 1006-0015 Keihin-style slot head (KJ prefix) 1006-0016 Keihin-style hex head (CR prefix) 1006-0017 Keihin-style hex head (CR prefix)

DESCRIPTION 4-pc. each jet 2-pc. each jet 2-pc. each jet 4-pc. each jet 2-pc. each jet 2-pc. each jet

sizes sizes sizes sizes sizes sizes

72.5 through 160 70 through 230 240 through 500 80 through 190 80 through 158 160 through 235

SUG. RETAIL $353.95 113.95 113.95 287.95 133.95 133.95

Keihin-style hex head

Keihin-style slot head

MIKUNI-STYLE SLOT HEAD (SJ PREFIX) JET SUG. RETAIL PART # SIZE (EA.) PART # 1006-0018 72.5 $2.75 1006-0028 1006-0019 75 2.75 1006-0029 1006-0020 77.5 2.75 1006-0030 1006-0021 80 2.75 1006-0031 1006-0022 82.5 2.75 1006-0032 1006-0023 85 2.75 1006-0033 1006-0024 87.5 2.75 1006-0034 1006-0025 90 2.75 1006-0035 1006-0026 92.5 2.75 1006-0036 1006-0027 95 2.75 1006-0037

JET SIZE 97.5 100 102.5 105 107.5 110 112.5 115 117.5 120

SUG. RETAIL (EA.) $2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75

PART # 1006-0038 1006-0039 1006-0040 1006-0041 1006-0042 1006-0043 1006-0044 1006-0045 1006-0046 1006-0047

JET SIZE 122.5 125 127.5 130 132.5 135 137.5 140 142.5 145

SUG. RETAIL (EA.) $2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75

MIKUNI-STYLE HEX HEAD (HJ PREFIX) JET SUG. RETAIL PART # SIZE (EA.) PART # 1006-0055 70 $2.75 1006-0073 1006-0056 80 2.75 1006-0074 1006-0057 90 2.75 1006-0075 1006-0058 100 2.75 1006-0076 1006-0059 105 2.75 1006-0077 1006-0060 110 2.75 1006-0078 1006-0061 115 2.75 1006-0079 1006-0062 120 2.75 1006-0080 1006-0063 125 2.75 1006-0081 1006-0064 130 2.75 1006-0082 1006-0065 135 2.75 1006-0083 1006-0066 140 2.75 1006-0084 1006-0067 145 2.75 1006-0085 1006-0068 150 2.75 1006-0086 1006-0069 155 2.75 1006-0087 1006-0070 160 2.75 1006-0088 1006-0071 165 2.75 1006-0089 1006-0072 170 2.75 1006-0090

JET SIZE 175 180 185 190 195 200 210 220 230 240 250 260 270 280 290 300 310 320

SUG. RETAIL (EA.) $2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75

PART # 1006-0091 1006-0092 1006-0093 1006-0094 1006-0095 1006-0096 1006-0097 1006-0098 1006-0099 1006-0100 1006-0101 1006-0102 1006-0103 1006-0104 1006-0105 1006-0106 1006-0107 1006-0108

JET SIZE 330 340 350 360 370 380 390 400 410 420 430 440 450 460 470 480 490 500

SUG. RETAIL (EA.) $2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75

KEIHIN-STYLE SLOT HEAD (KJ PREFIX) JET SUG. RETAIL PART # SIZE (EA.) PART # 1006-0127 72.5 $2.75 1006-0137 1006-0128 75 2.75 1006-0138 1006-0129 77.5 2.75 1006-0139 1006-0130 80 2.75 1006-0140 1006-0131 82.5 2.75 1006-0141 1006-0132 85 2.75 1006-0142 1006-0133 87.5 2.75 1006-0143 1006-0134 90 2.75 1006-0144 1006-0135 92.5 2.75 1006-0145 1006-0136 95 2.75 1006-0146

JET SIZE 97.5 100 102.5 105 107.5 110 112.5 115 117.5 120

SUG. RETAIL (EA.) $2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75

PART # 1006-0147 1006-0148 1006-0149 1006-0150 1006-0151 1006-0152 1006-0153 1006-0154 1006-0155 1006-0156

JET SIZE 122.5 125 127.5 130 132.5 135 137.5 140 142.5 145

SUG. RETAIL (EA.) $2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75

KEIHIN-STYLE HEX HEAD (CR JET SUG. RETAIL PART # SIZE (EA.) 1006-0165 80 $2.75 1006-0166 82 2.75 1006-0167 85 2.75 1006-0168 88 2.75 1006-0169 90 2.75 1006-0170 92 2.75 1006-0171 95 2.75 1006-0172 98 2.75 1006-0173 100 2.75 1006-0174 102 2.75 1006-0175 105 2.75 1006-0176 108 2.75 1006-0177 110 2.75

MIkuni-style hex head

MIkuni-style slot head

1006-0012

PART # 1006-0048 1006-0049 1006-0050 1006-0051 1006-0052 1006-0053 1006-0054

JET SIZE 147.5 150 152.5 155 157.5 160 170

SUG. RETAIL (EA.) $2.75 2.75 2.75 2.75 2.75 2.75 2.75

PART # 1006-0109 1006-0110 1006-0111 1006-0112 1006-0113 1006-0114 1006-0115 1006-0116 1006-0117 1006-0118 1006-0119 1006-0120 1006-0121 1006-0122 1006-0123 1006-0124 1006-0125 1006-0126

JET SIZE 510 520 530 540 550 560 570 580 590 600 610 620 630 640 650 660 670 680

SUG. RETAIL (EA.) $2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75

PART # 1006-0157 1006-0158 1006-0159 1006-0160 1006-0161 1006-0162 1006-0163 1006-0164

JET SIZE 147.5 150 152.5 155 157.5 160 170 190

SUG. RETAIL (EA.) $2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75

PREFIX) PART # 1006-0178 1006-0179 1006-0180 1006-0181 1006-0182 1006-0183 1006-0184 1006-0185 1006-0186 1006-0187 1006-0188 1006-0189 1006-0190

JET SUG. RETAIL SIZE (EA.) 112 $2.75 115 2.75 118 2.75 120 2.75 122 2.75 125 2.75 128 2.75 130 2.75 132 2.75 135 2.75 138 2.75 140 2.75 142 2.75

PART # 1006-0191 1006-0192 1006-0193 1006-0194 1006-0195 1006-0196 1006-0197 1006-0198 1006-0199 1006-0200 1006-0201 1006-0202 1006-0203

JET SUG. RETAIL SIZE (EA.) 145 $2.75 148 2.75 150 2.75 152 2.75 155 2.75 158 2.75 160 2.75 162 2.75 165 2.75 168 2.75 170 2.75 172 2.75 175 2.75

PART # 1006-0204 1006-0205 1006-0206 1006-0207 1006-0208 1006-0209 1006-0210 1006-0211 1006-0212 1006-0213 1006-0214 1006-0215 1006-0216

JET SUG. RETAIL SIZE (EA.) 178 $2.75 180 2.75 182 2.75 185 2.75 188 2.75 190 2.75 192 2.75 195 2.75 198 2.75 200 2.75 202 2.75 205 2.75 208 2.75

All part numbers in BOLD MAGENTA are new for 2010.

PART # 1006-0217 1006-0218 1006-0219 1006-0220 1006-0221 1006-0222 1006-0223 1006-0224 1006-0225 1006-0226 1006-0227

JET SUG. RETAIL SIZE (EA.) 210 $2.75 212 2.75 215 2.75 218 2.75 220 2.75 222 2.75 225 2.75 228 2.75 230 2.75 232 2.75 235 2.75


SECTION

6

JET ASSORTMENT KITS FOR HSR42/HSR45/HSR48 •HSR42 kit includes 150 through 170 main jets (2 each); 22.5 through 35 pilot jets (2 each); -96, -97 and -98 needles (1 each); 2 #60 a/p nozzles; needle clip; all necessary washers, special jet box •HSR45 kit includes 165 through 185 main jets (2 each); 20 through 32.5 pilot jets (2 each); -95, -96 and -98 needles (1 each); 2 #60 a/p nozzles; 2 O-rings, 4 jet needle E-rings; all necessary washers •HSR48 kit includes 180 through 210 main jets (2 each); 20 through 32.5 pilot jets (2 each); -95, -96 and -98 needles (1 each); 2 #60 a/p nozzles; 2 O-rings, 4 jet needle E-rings; all necessary washers •Some kit component are available separately PART # JET KITS KHS-025 1007-0323 1007-0322 INDIVIDUAL 1007-03241 1007-03271

DESCRIPTION HSR42 HSR45 HSR48 PARTS Jet washers (4-pk.) for HSR45 O-rings (4-pk.) for HSR45

SUG. RETAIL $109.95 108.95 108.95 .95 3.95

PART # DESCRIPTION INDIVIDUAL PARTS (CONT) 1 1007-0326 Pump nozzles (4-pk.) for HSR45/48 1007-03251 Needle jet E-rings (4-pk.) for HSR45/48 1004-0010 -96 needle jet for HSR45/48 1004-0011 -98 needle jet for HSR45/48

SUG. RETAIL

$5.95 .95 14.95 14.95

WINDSHIELDS TOURING KHS025

PART # DESCRIPTION INDIVIDUAL PARTS (CONT) 1 1005-0012 -32.5 pilot jets (4-pk.) for HSR48 1006-02461 205 main jets (4-pk.) for HSR48 1006-02471 210 main jets (4-pk.) for HSR48 1

SUG. RETAIL

$2.95 2.95 2.95

Sold to dealer as a 4-pack; sold to consumer as each.

•Large round-type head main jets used in HSR42/45/48 series carbs •From 150 through 200 in increments of 2.5 •Sold to dealer as 4-pack; sold to consumer as each •Genuine Mikuni SUG. DESCRIPTION RETAIL #150 main jet $2.95 #152.5 main jet 2.95 #155 main jet 2.95 #157.5 main jet 2.95 #160 main jet 2.95 #162.5 main jet 2.95 #165 main jet 2.95 #167.5 main jet 2.95 #170 main jet 2.95 #172.5 main jet 2.95

PART # KN100604175 KN1006041775 KN100604180 KN1006041825 KN100604185 KN1006041875 KN100604190 KN1006041925 KN100604195 KN100604200

PILOT JETS FOR HSR CARBS

FUEL/AIR SYSTEMS

•Genuine Mikuni pilot jets •Sold to dealer as 4-pack; sold to consumer as each SUG. DESCRIPTION RETAIL #175 main jet $2.95 #177.5 main jet 2.95 #180 main jet 2.95 #182.5 main jet 2.95 #185 main jet 2.95 #187.5 main jet 2.95 #190 main jet 2.95 #192.5 main jet 2.95 #195 main jet 2.95 #200 main jet 2.95

PART # KVM2848615 KVM28486175 KVM2848620 KVM28486225 KVM2848625 KVM28486275 KVM2848630

DESCRIPTION #15 pilot jet #17.5 pilot jet #20 pilot jet #22.5 pilot jet #25 pilot jet #27.5 pilot jet #30 pilot jet

SUG. RETAIL $2.95 2.95 2.95 2.95 2.95 2.95 2.95

PART # KVM2848635 KVM2848640 KVM2848645 KVM2848650 KVM2848655 KVM2848660

DESCRIPTION #35 pilot jet #40 pilot jet #45 pilot jet #50 pilot jet #55 pilot jet #60 pilot jet

SUG. RETAIL $2.95 2.95 2.95 2.95 2.95 2.95

•Patented air vane requires no modifications to install •Acceleration gains from idle to wide-open throttle 1050-0180 •Dyno tests show 2-5 horsepower gains and 4-6 ft.-lbs. max torque increases on OEM H-D engines •Independent tests were conducted on 88”, 96” and 110” engines •Complements popular air filter system upgrades •Made in the U.S.A. PART # DESCRIPTION 1050-0194 For 08-10 FLHT/FLHX/FLHR/FLTR models 1050-0182 For 06-10 Softail/Dyna, 06-07 FLHT/FLHX/FLHR/FLTR w/ Delphi EFI 1050-0181 For 01-05 Softail, 04-05 Dyna, 02-05 FLHT/FLHR/FLTR, 07-10 XL w/ Delphi EFI 1050-0180 For 88-06 models w/ OEM CV carb 1050-0195 For Mikuni HSR 42/45 carbs w/ early style 1.75” H-D adapter 1050-0196 For Mikuni HSR 42/45 carbs w/ late style 2” H-D adapter 1050-0197 For Mikuni HSR 48 carb w/ 2” adapter 1050-0205 For S&S Super E Shorty

HSR42 J8-8DDY01-95 J8-8DDY01-96 J8-8DDY01-97 J8-8DDY01-98

129.95 129.95 129.95 129.95 129.95 129.95 129.95

HSR45/48 J8-8CFY02-95 J8-8CFY02-96 J8-8CFY02-97 J8-8CFY02-98

DESCRIPTION Richest Richer Standard Leaner

SUG. RETAIL $10.95 10.95 10.95 10.95

•The turbulator uses a fixed-vane vortex design that turns your intake manifold into a violent mixing chamber •These vanes eliminate TU-4 heavy droplets of fuel, fuel TU-1 stacking and keep fuel from puddling •The result is no more load or dive spots – just crisp, clean throttle response throughout the powerband •Complete atomization also increases fuel mileage and eliminates stand-off •Made in the U.S.A. SUG. SUG. PART # DESCRIPTION TU-1 Bendix/Zenith Carbs TU-2 S&S B & E series

RETAIL $14.95 14.95

PART # DESCRIPTION TU-4 CV carbs TU-5 SS Super G

RETAIL $14.95 14.95

DS-289101

POWER NOW •Provides more horsepower and power at 1/4 and 1/2 throttle •Mounts into the backside/airboot side of the carburetor •Slices the single air venturi going through the carburetor into two smaller, faster venturis via the Power Now “Power Plate™” •The Power Plate has a precisely positioned hole to drastically increase the speed of the top and bottom venturis, thus creating more horsepower and power for your bike DESCRIPTION For OEM CV Carb For Mikuni HSR 42 carb For Mikuni HSR45 For Mikuni HSR48 For 06-10 Delphi EFI (except 08-10 Dresser) For 01-05 Delphi EFI

SUG. RETAIL $119.95 119.95 119.95 119.95 119.95 119.95

DS-289106 DS-289102

THE SYSTEM II FUEL ATOMIZERS •Atomizers work as a turbulator to properly mix fuel entering the intake manifold for better efficiency and performance •Available to fit various carburetors •Made in the U.S.A. PART # DESCRIPTION DS-289101 Atomizer for 38mm Bendix and Keihin with 15/8” i.d. manifold DS-289102 Atomizer for 40mm S&S, Mikuni and Screamin’ Eagle with 17/8” i.d. manifold DS-289106 Atomizer for CV carbs

All part numbers in BOLD MAGENTA are new for 2010.

TRANSMISSION & DRIVELINE

ELECTRICAL

TURBULATOR SUG. RETAIL $129.95

ENGINE

GASKETS & SEALS

JET NEEDLES FOR HSR SERIES CARBURETOR •Genuine Mikuni jet needles •Needles are available in a variety of sizes to suit most applications •Sold each

POWER X-WING

PART # 1050-0063 1050-0065 1050-0066 1050-0067 1050-0064 1050-0118

SEATS & SISSY BARS EXHAUST

MAIN JETS FOR HSR CARBS

PART # KN100604150 KN1006041525 KN100604155 KN1006041575 KN100604160 KN1006041625 KN100604165 KN1006041675 KN100604170 KN1006041725

LUGGAGE

SUG. RETAIL $18.95 18.95 18.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

345


SECTION

6

WINDSHIELDS TWINSHOT ADJUSTABLE FUEL CONTROL

TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

•Cost-effective, bolt-on upgrade eliminates the sluggish and inconstant throttle response of CV-40-carbureted H-D models •Converts all OEM CV-40 carburetors to a standardized fuel system 1050-0233 •Precision twin-hole sprayer for improved roll-on acceleration •Patented Quickshot accelerator pump technology eliminates low-speed bogging and coughing •Adjustable fuel jet to control accelerator pump fuel spray; dual check valve system for consistent spray pressure •Removable sprayer allows convenient service and maintenance; removable main jet cap for easy access tuning SUG. •Precision accelerator pump plunger rod improves PART # DESCRIPTION RETAIL spray response stiffer spring on activation arm delivers FOR 92-06 BIG TWIN AND XL WITH consistent spray response KEIHIN CV-40 CARBURETOR •Includes new float bowl O-ring, new plunger 1050-0233 Polished aluminum $179.95 arm and plunger arm boot 1050-0234 Matte black 179.95 •Made in the U.S.A.

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

•For mounting an S&S E and G series carburetor or flange mount carburetor on a 99-06 Twin Cam motor with S&S or stock cylinder heads •Will also fit a 84-99 80” Evolution that requires a manifold with a map sensor port •Come with a map sensor port and match OEM intake ports •Made in the U.S.A.

PART # DS-289096

DESCRIPTION For any 84-89 Harley models w/ stock Keihin carburetors

PART # DS-289146 1050-0046

DESCRIPTION S&S E-series intake manifold S&S G-series intake manifold

SUG. RETAIL $83.95 83.95

•Used to install a stock CV carburetor on S&S 35/8”, 4” and 41/8” bore motors •Will also fit S&S Hot Setup and Super Stock™ head kits •Made in the U.S.A.

$24.95

NOTE: Requires the use of S&S manifold O-rings and U-rings, sold separately. PART # ENGINE SIZE CYLINDER LENGTH SUG. RETAIL FOR S&S TWIN CAM STYLE MOTORS AND HEAD KITS 161722 88”/95” 4.9365” $99.95 161723 107” 5.995” 99.95 161724 116” 5.180” 99.95 FOR S&S BIG TWIN EVOLUTION STYLE MOTORS AND HEAD KITS 161733 88”/107” 5.375”/4.870” 99.95 161734 93”/113” 4.995” 99.95 161736 80”/89”/96” 5.550” 99.95

intake manifolds •O-rings sold in 10-pack; U-rings clamps sold each •Made in the U.S.A. PART #

DESCRIPTION

•Can be used to replace stock “compliance fitting” manifold on 84-89 and stock rigid-mount manifold from 90-99 •Use with stock or S&S cylinder heads •For use with stock 5.5550” length cylinders •Requires the use of S&S intake seals and flanges (sold separately) •Made in the U.S.A. PART # DESCRIPTION FOR 84-99 EVOLUTION-STYLE BIG TWIN 1050-0109 For Super A, B, E, L, H-D Tillotson, Bendix, and Keihin carbs (no MAP sensor port) 1050-0110 For Super G carbs (no MAP sensor port)

SUG. RETAIL

$82.95 82.95

MANIFOLD CONVERSION KIT FOR 80” EVOLUTION

INTAKE MANIFOLD

•Kit converts stock 80” Evolution manifold to a more rigid-mount system •Eliminates cracking and leaking problems associated with the stock rubber compliance fittings •Includes an S&S Performance manifold, mounting flanges, two specially molded O-rings and two .350” spacers for spacing out the stock air cleaner or carb mount bracket •Fits 84-99 80” models if flange-type carburetor or adapter is used •Replacement flange seals also available SUG. •Made in the U.S.A. DESCRIPTION RETAIL NOTE: Not for use with PART # DS-289230 Manifold conversion kit $99.95 an S&S G series carb.

BILLET FLANGE ADAPTER FOR SPIGOT-TYPE CARBS 1003-0060

0934-0665 SUG. RETAIL (EA.)

•Allows you to mount OEM late-model CV or Mikuni HSR-42 carbs on Sportsters, Panheads, Shovelheads or early Evolutions with two-bolt flange manifolds •CNC-machined from 6061 billet aluminum •Mounting holes are 2.75” on center •Can be polished, plated or painted •Carb-to-manifold seal also available; see section 9 PART # DESCRIPTION SUG. RETAIL •Sold each DS-289219 Billet flange adapter $28.95 •Made in the U.S.A.

FRAMES, O-RINGS (MANIFOLD TO CYLINDER HEADS) For 84-06 Big Twin and 86-06 SUSPENSION 1003-0060 Sportster engines w/ S&S manifold $3.95 & FENDERS U-RINGS (CV CARB TO MANIFOLD) 40-42mm 14.95 FOOTRESTS 0934-0666 44-45mm 14.95 & LICENSE 0934-0665 PLATE FRAMES TIRES, RUBBER FLANGE ADAPTERS FOR TUBES & SPIGOT-TYPE CARBURETORS HS42/018-42 WHEELS •Adapters fit 38mm and 40mm M-VM-40-200 spigot-type carburetors BLACK FLANGE ADAPTERS HARDWARE, •Includes clamp SUG. •Rubber flange adapters fit CHEMICALS •Sold individually 42mm, 45mm and 48mm DESCRIPTION RETAIL & TOOLS PART # spigot-type carburetors PART # DESCRIPTION M-VM-36-200 36mm-38mm rubber flange adapter $17.95 •Includes clamp HS42/018-42 42mm 40mm rubber flange adapter – COVERS, M-VM-38-200 •Original straight43mm carb spigot o.d. (fits RS40, RS42) 17.95 HS42/018-45 45mm SECURITY through design 40mm rubber flange adapter – 52mm carb spigot o.d. 20.95 •Sold individually HS42/062-48 48mm & GENERAL M-VM-40-200

346

SUG. RETAIL

FLANGE-MOUNT INTAKE MANIFOLDS

TANKS & O-RINGS AND U-RINGS OIL FILTERS •For use with all current S&S DASHES & GAUGES

•Removing the float bowl and drilling one hole is all that is required; no need to remove the carb from the engine •High-flow accelerator pump will increase fuel flow through the pump, significantly improving the low-end and mid-range response •Made in the U.S.A.

FLANGE MOUNT INTAKE MANIFOLDS

SPIGOT-MOUNT INTAKE ELECTRICAL MANIFOLDS FOR S&S HEADS

LIGHTING

KEIHIN CARB ACCELERATOR PUMP KIT

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $26.95 26.95 26.95


SECTION MANIFOLD SPACER KITS

EXTENDED MANIFOLDS AND FLANGES FOR STROKER KITS •Jim’s Stroker kits require an extended manifold and flange for 99-05 Big Twin carb models 1050-0222 •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1050-0222 Manifold for Mikuni carb, stock CV carb or Screamin’ Eagle CV carb $102.95 1050-0224 Flanges for use w/ PART #1050-0222 when using a 44mm CV or 45mm Mikuni carb 36.95 1050-02231 Manifold for S&S Super G carb 162.95 1

Includes aluminum spacer. Must use in conjunction with the Super G spacer.

•For use with 116” Jim’s Stroker kits when fitting 1022-0060 standard-width manifolds, such as ® standard CV carb, H-D Delphi EFI, Screamin’ Eagle and S&S® •Needed because 116” Stroker kits have .100” taller cylinders that increase the distance between heads by .080” •Made in the U.S.A. PART # 1022-0061 1022-0060

DESCRIPTION For 06-10 Twin Cam For 90-05 Big Twin

SUG. RETAIL $111.95 48.95

CHROME INTAKE MANIFOLD FLANGES •Chrome flanges replace the stock flanges •Sold in pairs •Replacement intake manifold seals also available; see section 9

BILLET INTAKE FLANGES FOR SCREAMIN’ EAGLE® THROTTLE BODIES

PART # DS-289212

•Made from high-strength, durable 6061 T-6 billet aluminum to increase strength and resist problematic cracking at the mounting holes •Direct replacement for the flanges included with Screamin’ Eagle 50mm throttle bodies made for 06-07 applications •Eliminate fatigue cracks and the resultant air leaks in the intake tract •Kit includes manifold seals •Made in the U.S.A. SUG. NOTE: Legal in California PART # DESCRIPTION RETAIL only for racing vehicles 1022-0045 For 06-07 Screamin’ Eagle which may never be throttle bodies OEM #27623-05 $24.95 used upon a highway.

WILD THINGS™ INTAKE FLANGES •Now you can install 99-05 style Twin Cam cylinder heads on 06-07 Twin Cam models equipped with the Screamin’ Eagle 50mm throttle body or 06-10 style Wild Things throttle body •Use intake flange seals for 50mm Screamin’ Eagle throttle bodies •Reduced diameter socket head screws are included to ease installation •Sold in pairs PART # DESCRIPTION SUG. RETAIL 1022-0056 Wild Things intake flanges for 99-05 Twin Cam cylinder heads (pr.) $84.95

1015-0093

1015-0094

1015-0095

1015-0096

DESCRIPTION For 90-05 Big Twin and 86-06 XL models

SUG. RETAIL $22.95

INTAKE MANIFOLD FLANGES •Sold in pair (front/rear) •Replacement seals also available •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 84-05 BIG TWIN 86-06 SPORTSTER ENGINES WITH S&S INTAKE MANIFOLD 1050-0232 Front/rear flange; repl. H-D #27009-86B and #27010-86B $9.95 (pr.) 1003-0060 Repl. seals (10-pk) 3.95 (ea.)

INTAKE FLANGES •CNC-machined 6061 billet aluminum construction •Will not crack or warp like some forged flanges •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1022-0068 For 06-10 Big Twin models $53.95 1022-0069 For 01-05 Big Twin models 53.95

1022-0068

•Smooth die-cast chrome cover replaces the OEM black plastic top cover •Installation is a snap; just remove the four OEM screws and bolt on the new cover with them PART # DESCRIPTION SUG. RETAIL $15.95 DS-288801 For 88-06 Harley CV carb models; repl. OEM #27040-88

KHS-028

MIKUNI CHROME CARB TOP COVER CV CARBURETOR TOP COVERS •Machined from 6061 T-6 billet aluminum, polished to a high luster and chrome-plated •PART #s 1015-0094 and 1015-0096 relocate choke cable for easier access •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 88-06 CV40/44 CARBURETORS ON BIG TWIN, XL AND BUELL 1015-0093 Smooth w/ logo $53.95 1015-0094 Smooth w/ logo and choke cable bracket 59.95 1015-0095 Smooth 53.95 1015-0096 Smooth w/ choke cable bracket 59.95

CARBURETOR SOCKETHEAD BOLT KITS •Replace the stock screws with strong chrome sockethead bolts •For use on CV carburetors and S&S carburetors •Made in the U.S.A. PART # DS-190129 DS-190695 DS-190697

•Highly polished chrome cover gives a unique custom look •Available with or without embossed Mikuni logo PART # DESCRIPTION KHS-029 Cover w/ Mikuni logo KHS-028 Cover w/o Mikuni logo

SUG. DESCRIPTION RETAIL For CV carburetor on 90-06 Big Twin and 88-03 XL models $25.95 For top cover only on 88-06 CV carburetors 10.95 For S&S E and G carburetor body and air cleaner 31.95

All part numbers in BOLD MAGENTA are new for 2010.

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

DASHES & GAUGES SUG. RETAIL $22.95 22.95

FLOAT BOWL SPEED SCREW KITS DS-190129

TOURING

TANKS & OIL FILTERS

1050-0158

•Electropolished stainless steel for a great custom look •Will not corrode in extreme climates •Longer and stronger than the stock screws, makes them easier to handle; will not round off PART # 5 • /16” hex head design 1050-0158 eases bowl removal 1050-0159 and jet changing 1050-0160 •Made in the U.S.A.

WINDSHIELDS

ELECTRICAL

SMOOTH CHROME CV CARB TOP COVER

KHS-029

6

DESCRIPTION SUG. RETAIL For CV/HSR carbs $34.95 For S&S B&D carbs 34.95 For S&S E&G carbs 34.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

347


SECTION

6

WINDSHIELDS

DS-289187

1012-0070

TOURING 1012-0050 1012-0071

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

DS-289002

CHROME BILLET BREATHERS

DRILLED BREATHER KITS •Billet aluminum construction •Bolt directly into cylinder heads •Sold in pairs •All mounting hardware included •Made in the U.S.A. PART # DESCRIPTION FOR 99-10 TWIN CAM 1012-0070 Chrome 1012-0071 Black anodized

SUG. RETAIL $108.95 94.95

ENGINE BREATHERS •Chromed billet aluminum crankcase breathers screw directly into cylinder heads •Allow a clean, simple way for the engine to “breathe” correctly •Made in the U.S.A. PART # 2106-1001

•Breathers are available for use with the H-D breather kit (single breather) or for use with a carburetor support bracket (dual breathers) •Support brackets and breather bolts sold separately •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 99-10 TWIN CAM (PR.) 1012-0051 Finned Dagger $249.95 DS-289002 Dagger 249.95 FOR 93-99 EVOLUTION BIG TWIN AND 91-10 XL (PR.) 1012-0050 Finned Dagger 239.95 DS-289001 Dagger 239.95 FOR USE WITH H.D. BREATHER KIT DS-289187 Bullet 99.95

KHS-020

DESCRIPTION For all 93-99 Evolution Big Twin and 91-10 XL

KHS-030

SUG. RETAIL $99.95

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

CRANKCASE BREATHER KITS •Allow installation of a 40mm or 42/45mm Mikuni “Smoothbore” carburetor kit on 93-06 Big Twin with the crankcase breather system PART # DESCRIPTION KHS-020 For HSR42/45 carb on Evo Big Twin KHS-030 For HSR42/45 carb on Twin Cam

2110-1122 2110-1123

SUG. RETAIL $74.95 74.95

CABLES BRAKES

DS-289600

2110-1124

TANKS & POWER VENT™ OIL FILTERS CRANKCASE BREATHER KITS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

348

•CNC-machined T-6 billet aluminum •Show-quality polished finish •One-way valve prevents backflow •Kits include machined bolts and plastic washers for a tight seal •Work with most CV carb and EFI applications •Accept 1/8” NPT fitting •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 2110-1123 For 93-99 80” Evolution $173.95 2110-1122 For 99-10 Twin Cam (except 08-10 Dressers) 173.95 2110-1124 For 91-10 XL 173.95 DS-289600 For 84-92 80” Big Twin 89.95

DEVONATOR SERIES II CRANKCASE BREATHER/ SUPPORT BRACKET •Self-contained breather system •6061 T-6 aircraft aluminum construction •Breathing is routed through the unit and into the throat of the 1011-0529 carburetor track; minimizes oil in the intake tract •Fits Harley-Davidson and Buell models with CV carb or Delphi EFI •Chrome finish •Uses factory breather bolts •O-rings, gasket and mounting screws included •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1011-0529 For 91-10 XL models $192.95 1011-0530 For 92-99 Evolution 192.95 1011-0531 For 99-10 Twin Cam (except 08-10 Dressers) 192.95

DEVONATOR SERIES CRANKCASE BREATHER •Competition style, brushed billet aluminum breather designed to follow the contour of the heads •Vents atmospherically through a hose barb in the back of the unit •Design efficiency virtually eliminates both oil in the air cleaner box and nagging oil consumption associated with standard vented breathers PART # DESCRIPTION SUG. RETAIL •Requires 1/2” i.d. breather hose and carb support bracket DS-289116 For 91-10 XL models $149.95 •Made in the U.S.A.

All part numbers in BOLD MAGENTA are new for 2010.


SECTION 7807-0013

1012-0092

6

WINDSHIELDS TOURING

CARB SUPPORT BRACKET/ BREATHER KITS 1012-0095 •Billet aluminum construction with a chrome, black or wrinkle-black finish •Clean, one-piece design support bracket and breather kit •Crankcase breathes back into the carb or throttle body so no external lines are necessary •Allow custom air cleaners or velocity stacks to be installed in a horizontal or vertical position; no other adapters are required •Include installation hardware •Made in the U.S.A.

LUGGAGE SEATS & SISSY BARS

1012-0137 7807-0014

PART # DESCRIPTION SUG. RETAIL FOR 08-10 FLHT, FLHR, FLHX, FLTR 1012-0095 Chrome $247.95 FOR 93-06 BIG TWIN W/ 40MM CV CARB AND 01-10 BIG TWIN W/ DELPHI EFI (EXCEPT 08-10 DRESSER) 7807-0012 Chrome 166.95 1012-0089 Black 166.95 1012-0090 Wrinkle black 166.95 FOR 93-06 BIG TWIN W/ S&S E OR G CARB 7807-00131 Chrome 172.95 1012-00911 Black 172.95 1012-00921 Wrinkle black 172.95

1012-0093

PART # DESCRIPTION FOR 93-99 EVOLUTION BIG TWIN W/ MIKUNI 42/45/48 CARB 7807-0014 Chrome 1012-0093 Black 1012-0094 Wrinkle black FOR 91-10 XL W/ CV CARB OR DELPHI EFI 1012-0137 Chrome 1012-0138 Black 1012-0139 Wrinkle black 1

SUG. RETAIL $197.95 197.95 197.95 207.95 207.95 207.95

Not for 100” S&S motors.

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

CARB SUPPORT BRACKET WITH BREATHER SYSTEM •Billet aluminum with chrome finish •Clean, one-piece design support bracket with internal breather system •Crankcase breathes back into the carb or throttle body so no external lines are necessary •Accepts most CV/Delphi EFI-style air cleaners •Includes installation hardware •Made in the U.S.A. PART # DESCRIPTION FOR 93-10 BIG TWIN (EXCEPT 08-10 DRESSER) 1012-0079 For S&S E/G carb, Evolution 1012-0080 For S&S E/G carb, Twin Cam 1012-0081 For CV carb, Evolution 1012-0082 For CV carb/Delphi EFI Twin Cam 1012-0083 For Mikuni HSR 42mm, Evolution 1012-0084 For Mikuni HSR 42mm, Twin Cam

GASKETS & SEALS

CHROME CRANKCASE BREATHER

1012-0081

SUG. RETAIL $304.95 304.95 304.95 304.95 304.95 304.95

•With this breather, as oil-laden air condenses in the breather body, the excess oil now runs back down into the engine rather than into the air cleaner •A really clean setup

ELECTRICAL

NOTE: Not for use on fuelinjected models. PART # DESCRIPTION 1012-0073 For 99-06 Twin Cam 1012-0072 For 93-99 Evolution Big Twin

LIGHTING SUG. RETAIL $63.95 63.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

2110-0316

BRAKES CRANKCASE BREATHER KIT

DS-289620

PART # DS-289147

DS-289082

TANKS & OIL FILTERS

CRANKCASE BREATHER KIT

•Maximum efficiency in crankcase ventilation •Bolts directly to carburetor/ brace; no exposed filter •For CV/HSR42 carbs

•One-piece chrome tube design •Comes with breather bolts, washers and hardware •Works with most aftermarket air cleaners

DESCRIPTION For 93-99 80” Big Twin, 91-06 XL

SUG. RETAIL $32.95

PART # DS-289620 2110-0316

DESCRIPTION For 93-07 Big Twin For 91-10 XL

1013-0030

DS-289060

CRANKCASE BREATHER/SUPPORT BRACKET KITS

SUG. RETAIL $32.95 29.95

1013-0036

•Kit allows the installation of aftermarket air cleaner assemblies on late model bikes equipped with OEM CV carb or Delphi EFI system •Includes bracket, filter, hose and all mounting hardware necessary for installation except where noted SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION DS-289082 For all 93-10 Big Twin models (except 08-10 Dressers) $64.95 1013-0036 For 08-10 FLHT, FLTR, FLHR models DS-289060 For 93-10 Big Twin models (no hose or filter) 1013-0030 For 07-10 XL model (except 08-10 Dressers) 54.95 DS-289126 For 91-06 XL models 1013-0035 For 08-10 FLHT, FLTR, FLHR models (no hose or filter) 29.95 DS-289073 Repl. filter

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $64.95 58.95 58.95 12.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

349


SECTION

6

WINDSHIELDS BRAIDED HOSE CRANKCASE BREATHER KIT

TOURING LUGGAGE SEATS & SISSY BARS EXHAUST

AIR CLEANER BREATHER KIT •Enables the mounting of most aftermarket air cleaners to late-style engines that breathe through the cylinder heads •Fittings can be rotated 360° so that hoses can be routed as necessary •Hose sold separately PART # DS-289055

DESCRIPTION For 93-10 Big Twin and 91-10 XL models

SUG. RETAIL $45.95

FUEL/AIR SYSTEMS

1012-0019

1012-0016

TRANSMISSION & DRIVELINE 31/4” CUT-TO-LENGTH CHROME BREATHER BOLT KITS

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

NOTE: Not recommended for stock applications. Make sure the braided line does not contact anything, i.e. the gas tank, carb or wiring, as damage may result. PART # DS-289118

ENGINE

GASKETS & SEALS

•This kit provides the best looking alternative to black rubber hoses when mounting a crankcase breather system •Features a 3/8” i.d. stainless steel braided hose crimped onto chrome banjo fittings •Outlet side of assembly is long enough to custom-route the hose and mount the breather filter in an inconspicuous location •Includes breather filter (with mounting stud), hardware and instructions •Air cleaner and carb support bracket must be purchased separately

•Solve the problem when mounting a carb support bracket •Available in two styles and three sizes •Sold in pairs •Made in the U.S.A. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION POINTED BUTTONHEAD 1012-0014 1/2”-13 $67.95 1012-0017 1/2”-13 67.95 1012-0018 3/8”-16 1012-0015 3/8”-16 1012-0016 5/16”-18 67.95 1012-0019 5/16”-18

SUG. RETAIL $67.95 67.95 67.95

DESCRIPTION For 93-10 Big Twin custom applications only

SUG. RETAIL $66.95

BREATHER BOLT KITS •Chrome-plated button-head bolts fit most support brackets and breathers •Kit for 93-99 Evolution-style engines comes with two 1/2”-13 x 13/4” bolts, four thick aluminum washers and four stainless steel washers •Kit for 99-10 Twin Cam-style engines comes with two 3/8”-16 x 13/4” coarse-thread bolts, six stepped aluminum washers and four stainless steel washers 1012-0039 •Made in the U.S.A. PART # 1012-0038 1012-0039

DESCRIPTION For 93-99 Evolution For 99-10 Twin Cam

1012-0038

SUG. RETAIL $39.95 49.95

1012-0009

DS-289614

CABLES DS-289611

BRAKES

DS-289613

BREATHER BOLT KITS

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

350

•Designed specifically for Novello velocity stacks with one-piece support and breather •Kits include two chrome spacers, two stainless steel polished bolts and six shims •Give a clean, open look to the carb •Made in the U.S.A.

•CNC-machined 17/16” polished stainless steel bolts •Fit most support brackets and breathers •Sold in pairs with washers •Replacement washers available separately •Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL 1012-0009 Evolution bolt kit for $79.95 S&S/CV carbs (2.5” long) 1012-0010 Twin Cam bolt kit for S&S/ 79.95 CV carbs (2.5” long)

PART # DESCRIPTION SUG. RETAIL TWIN CAM BOLTS DS-289611 Hex head $36.95 DS-289613 Button head 36.95 DS-289614 Repl. washers (10-pk.) 6.95

CUSTOM BREATHER BOLTS

DS-289610

DS-289612

PART # DESCRIPTION SUG. RETAIL EVOLUTION BOLTS DS-289610 Hex head $36.95 DS-289612 Button head 36.95 DS-289614 Repl. washers (10-pk.) 6.95

SPECIALTY BREATHER BOLTS WITH BOLT STANDS 1012-0003

•High-quality CNC-machined stainless steel bolts •Unique 3/4” long threaded bolt standoff (machined into the bolt head) provides a secure mounting bracket attachment point for accessories off the cylinder head breather outlets •When used with spacers (not included) an infinite range of locations can be adapted between the air cleaner backplate and cylinder heads •Package includes two breather bolts, two 3/8” button head bolts, two flat washers and eight nylon washers •Made in the U.S.A. PART # 1012-0003 1012-0004

DESCRIPTION For 93-99 Evolution For 99-10 Twin Cam

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $44.95 44.95


SECTION

6

WINDSHIELDS TOURING

THREAD REDUCER •Used on 93-99 H-D cylinder heads when installing a carburetor support bracket that requires 5/16”-18 mounting bolts •Reduces a 1/2”-13 threaded hole to 5/16”-18 •Sold each; two required per motor •Made in the U.S.A. SUG. PART # DESCRIPTION RETAIL 7806-2940 1/2”-13 to 5/16”-18 thread reducer $5.95

BREATHER BOLT WASHER KIT

LUGGAGE

•Features four 3/8” and four 1/2” aluminum centering washers •Also includes four nylon sealing washers SUG. PART # DESCRIPTION RETAIL 1012-0005 For 91-09 breather systems $7.95

BREATHER SHOP SERVICE KIT •Includes all gaskets, seals and O-ring to service OEM breather systems •Made in the U.S.A PART # DESCRIPTION 0934-0942 Breather service kit

SEATS & SISSY BARS SUG. RETAIL $9.95

EXHAUST FUEL/AIR SYSTEMS ENGINE

CARB SUPPORT BRACKET WITH CHOKE CABLE MOUNT

TRANSMISSION & DRIVELINE

•Chrome-plated stamped steel •Provides support for carb and air cleaner •Offers mounting of choke control under the carb for easy access PART # 2110-1212

DESCRIPTION For 92-06 Big Twin w/ Mikuni HSR 42/45 carb

GASKETS & SEALS

SUG. RETAIL $29.95

ELECTRICAL LIGHTING

1013-0017 DS-289053

HANDLEBARS, CONTROLS & MIRRORS

DS-289190

AIR CLEANER BRACES •Chrome air cleaner braces provide additional support for the Dragtron™ II air cleaners or any flat-backed air cleaners •Mount to the cylinder heads •Can be used in conjunction with most breather kits (where applicable) •Breather kits/bolts sold separately •All gaskets and mounting hardware included •For replacement gaskets see Gaskets & Seals section PART # DS-289190 DS-289053 1013-0035 1013-0017 DS-289062

CABLES ADJUSTABLE CARBURETOR SUPPORT BRACKET DS-289062

DESCRIPTION For 90-10 Big Twin (except 08-10 Dressers) (CV carb/Delphi EFI.) For 84-89 Big Twin Evolution (butterfly carb.) For 08-10 FLHT, FLHR, FLHX, FLTR For 07-10 XL For 88-06 XL

SUG. RETAIL $29.95 24.95 29.95 24.95 24.95

•Adjusts from 51/4” to 63/8” •Mounts from the center case bolt between cylinders to the lower flange mount of the manifold •Made in the U.S.A. SUG. PART # DESCRIPTION RETAIL 160471 Support bracket $15.95

1010-0120

NESS-TECH® 90° AIR FILTERS •Carved from billet aluminum and then beautifully chrome-plated •Feature patented “Big Sucker” breather technology •Made in the U.S.A. PART # DESCRIPTION 1010-0120 For Evolution and Twin Cam motors w/ CV carb or 01-05 Delphi EFI 1010-0121 For 107” and under S&S motors w/ S&S carb 1010-0122 For 111”-124” S&S motors w/ S&S carb (except 113”)

All part numbers in BOLD MAGENTA are new for 2010.

1010-0122 SUG. RETAIL $299.95 299.95 299.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

351


SECTION

6 7807-0017

WINDSHIELDS 1015-0086

TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1015-0104

1015-0067

DRAG SPECIALTIES DESIGN AIR CLEANERS •Chrome air cleaner kit with spear- or twister-style cone designed exclusively for Drag Specialties •Increases airflow approximately 10% more than an OEM air cleaner •Includes filter cone with 360° slots, K&N air filter, 90° chrome elbow and installation hardware •Will accept D&M Bullet replacement cones •Requires the use of a carb support bracket and breather kit (sold separately) •Optional adapters allow mounting on various carbs (sold separately) •Made in the U.S.A. FOR 90-06 BIG TWIN AND 88-06 XL WITH 40MM CV CARB OR 01-10 DELPHI EFI (EXCEPT 08-10 DRESSERS) PART # DESCRIPTION 1015-0086 Drag Specialties Spear air cleaner 1015-0104 Drag Specialties Twister air cleaner 7807-0018 Repl. air filter 1011-1778 Rain sock

THE BULLET AIR CLEANERS SUG. RETAIL $489.95 538.95 70.95 26.95

ENGINE EVIL TWIN MINI BOSS DUAL AIR CLEANER KIT

TRANSMISSION & DRIVELINE

•Delivers an aggressive, sinister style with maximum airflow •Fits with 5-gallon fuel tanks •Made in the U.S.A. SUG. PART # DESCRIPTION RETAIL 1010-0707 For 90-06 Big Twin with 40mm CV carb or 01-10 Delphi EFI (except 08-10 Dressers) $1,393.95

GASKETS & SEALS ELECTRICAL LIGHTING

1015-0066 1015-0071

•Chrome air cleaner with a bullet-shaped cone with 360° slots •Increases airflow approximately 10% more than an OEM air cleaner •Includes bullet-shaped filter cone, K&N air filter, 90° elbow and installation hardware •Available with black or chrome elbow •Diamond-cut cones also available; scalloped design •Requires the use of a carb-support bracket and breather kit (sold separately) •Made in the U.S.A. FOR 90-06 BIG TWIN AND 88-06 XL WITH 40MM CV CARB OR 01-10 DELPHI EFI (EXCEPT 08-10 DRESSERS) SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL WITH CHROME ELBOW WITH BLACK ELBOW (CONT) 7807-0017 Chrome cone $489.95 1015-0066 Black cone $489.95 1015-0067 Red diamond1015-0073 Black diamondcut cone 594.95 cut cone 594.95 1015-0071 Black diamondRAIN SOCK AND REPLACEMENT cut cone 594.95 AIR FILTER WITH BLACK ELBOW 1011-1780 Rain sock 26.95 1015-0065 Wrinkle 7807-0018 Repl. air filter 70.95 black cone 489.95

1015-0107

DS-289544

1015-0073

DS-289543

1015-0011

HANDLEBARS, CONTROLS & MIRRORS DS-289546

CABLES

1015-0014

1015-0021

BRAKES POWER FLOW AIR CLEANERS

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

352

1015-0036

•Provides the latest look and performance of forward-style intake systems •Increases airflow approximately 20% more than an OEM air cleaner •Can be installed horizontally or vertically when using a 3.5-gallon Fat Bob or smaller fuel tank; vertical adapter sold separately •Requires carburetor support bracket and breather kit; sold separately •Includes a CNC-machined billet filter cone with tapered, straight or Superslot slots, a 90° elbow, K&N air filter, gasket, hardware and wrench •Diamond-cut cones also available; feature unique diamond-cut design on the edges of the slot openings •Optional adapters allow mounting on various carbs (sold separately) •Made in the U.S.A. FOR 90-06 BIG TWIN AND 88-06 XL WITH 40MM CV CARB OR 01-10 DELPHI EFI (EXCEPT 08-10 DRESSERS) PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. RETAIL WITH CHROME ELBOW WITH BLACK ELBOW (CONT) 1015-0107 Chrome cone, Superslot $489.95 1015-0015 Black cone, straight slots $489.95 DS-289544 Chrome cone, straight slots 489.95 1015-0021 Wrinkle black cone, tapered slots 489.95 1015-0011 Blue cone, straight slots 489.95 1015-0036 Black diamond-cut cone, tapered slots 594.95 DS-289543 Chrome cone, tapered slots 489.95 RAIN SOCK AND REPLACEMENT FILTER WITH BLACK ELBOW 1011-1779 Rain sock 29.95 DS-289546 Chrome cone, straight slots 489.95 DS-289549 Repl. air filter 70.95 1015-0014 Wrinkle black cone, straight slots 489.95

HS42/001-K

1012-0011 DS-289547

AIR CLEANER ADAPTERS •For D&M Power Flow, Bullet, Hustler and Drag Specialties air cleaners •Made in the U.S.A. PART # 1012-0011 7807-0118 HS42/001-K DS-289547

DESCRIPTION S&S Super D carburetor (vertical or horizontal) S&S E and G carburetor (vertical or horizontal) Mikuni carburetor (horizontal) 40mm CV carburetor (vertical)

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $100.95 41.95 18.95 39.95


SECTION

6

WINDSHIELDS

2110-6969 DS-288764

TOURING LUGGAGE 1010-0239

1010-0241

DOMINATOR AND DOMINATOR XL FORCEWINDER KITS •Air intake kits include a polished Dominator breather bracket, Forcewinder polished air intake manifold, K&N filter, black pre-filter sock and all necessary hardware •Pro series models also include a Force Pro Series Billet air filter •Made in the U.S.A. DOMINATOR FOR BIG TWINS PART # DESCRIPTION SUG. RETAIL FOR 99-06 TWIN CAM W/ CV CARB & 01-10 TWIN CAM W/ DELPHI EFI (EXCEPT 08-10 DRESSER) 1010-0248 Dominator $412.95 1010-0249 Dominator pro 524.95 FOR 92-99 EVOLUTION BIG TWIN W/ CV CARB 1010-0239 Dominator 412.95 1010-0241 Dominator pro 524.95 FOR 92-99 EVOLUTION BIG TWIN W/ MIKUNI 42/45/48 CARB 1010-0242 Dominator 503.95 1010-0244 Dominator pro 576.95 FOR 92-99 EVOLUTION BIG TWIN W/ S&S E/G CARB 1010-0246 Dominator 503.95 1010-0247 Dominator pro 576.95 FOR 99-06 TWIN CAM W/ MIKUNI 42/45/48 CARB 1010-0250 Dominator 503.95 1010-0251 Dominator pro 576.95 FOR 99-06 TWIN CAM W/ S&S E/G CARB 1010-0252 Dominator 503.95 1010-0253 Dominator pro 576.95 DOMINATOR XL FOR SPORTSTER PART # DESCRIPTION FOR 88-06 SPORTSTER W/ CV CARB 1010-0254 Dominator 1010-0255 Dominator pro

SUG. RETAIL $412.95 524.95

DS-288922

SEATS & SISSY BARS FORCEWINDER XR-2 AIR CLEANER/BREATHER KITS •Second generation Forcewinder kits •99-06 Twin Cam carburetor models, 01-06 Delphi fuel-injected models include a 90° cast elbow, cone-shaped air filter, dry sock, mounting hardware and breather line kit that feeds back into the air cleaner (requires support bracket PART #DS-289190 for Big Twin and PART #DS289062 for XL models; must be purchased separately) •95-01 FLT models include a 90° cast elbow, cone-shaped air filter, dry sock, support bracket, mounting hardware and a breather line that feeds back into the air cleaner •Optional adapter kits allow mounting of systems to S&S or Mikuni carbs •Made in U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 01-10 FXST/FLST; 04-10 FXD/FXDWG AND 02-07 FLT FUEL-INJECTED MODELS DS-288763 Polished $341.95 DS-288764 Black 406.95 2110-1914 Wrinkle black 406.95 FOR 99-06 TWIN CAM CARBURETED MODELS DS-288763 Polished 341.95 DS-288764 Black 406.95 FOR 92-99 80” EVOLUTION CARBURETED MODELS DS-288760 Polished 341.95 FOR 99-01 FLT FUEL-INJECTED MODELS 2110-6969 Polished 319.95 FOR 91-06 XL AND 95-02 BUELL (CARB) MODELS DS-288769 Polished 341.95 DS-288779 Black 427.95 FOR 99-02 FUEL-INJECTED BUELL MODELS DS-288766 Polished 362.95 REPLACEMENT COMPONENTS 1011-0006 Short XR-2 air filter (3.25” long) 73.95 DS-288791 Repl. Force air filter 73.95 DS-288792 Repl. Force air dry charger sock 32.95

FORCEWINDER PRO BILLET SERIES AIR FILTER

PART # 1011-0896

DESCRIPTION Pro billet series air filter

SUG. RETAIL $151.95

2104-1904 2104-1902

FORCEWINDER AIR CLEANER ADAPTERS •Used to mount Forcewinder XR/Forcewinder XR-2 air cleaners to S&S E and G carburetors and Mikuni HSR 42/45/48mm carburetors •Carb to air cleaner gasket (5-pk) is available separately; PART #DS-173249 •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR S&S E AND G CARBS 2104-1904 Polished adapter $59.95 DS-288921 Natural adapter 37.95 FOR HSR MIKUNI CARBS 2104-1902 Fits 42/45mm carb (polished) 59.95

All part numbers in BOLD MAGENTA are new for 2010.

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

TANKS & OIL FILTERS

FORCEWINDER XR AIR INTAKE SYSTEMS •Kit includes 90° cast aluminum elbow, K&N air filter, black dry charger sock, K&N crankcase breather filter, 3/16” Allen screws, intake gasket, cable ties, a 30” vent hose and instructions •Requires the use of carburetor-support bracket/breather kit (sold separately) •Optional adapter kits allow mounting of systems to S&S or Mikuni carbs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 90-06 BIG TWIN/XL MODELS W/ 40MM CV CARB, 01-10 BIG TWIN AND 07-10 XL W/ DELPHI EFI (EXCEPT 08-10 DRESSERS) 2110-1913 Wrinkle black $263.95 DS-288923 Black 263.95 DS-288922 Polished 219.95 FOR 97-02 M2, 95-96 S2, 96-98 S1, S1W AND 96-98 S3 BUELL MODELS W/ 40MM CV CARBURETORS DS-288913 Polished 245.95 DS-288914 Black 282.95 REPL. COMPONENTS DS-289239 Repl. air filter 73.95 DS-288792 Dry charger sock 32.95

FUEL/AIR SYSTEMS

BRAKES

•Patterned after the Original Forcewinder air filter •Comes pre-oiled and ready for installation •Made from billet aluminum with a polished finish •Fits XR air intake systems only •Made in the U.S.A.

2110-1913

EXHAUST

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

353


SECTION

6

WINDSHIELDS

1022-0052 1022-0055

TOURING 1022-0055

1010-0406

1010-0407

LUGGAGE SEATS & SISSY BARS AIR INTAKES EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

1010-0475

1010-0478

•It’s all about how much air a motor can take in •Here are systems that work better and look better than any other systems on the market •An all-aluminum venturi in both designs helps shape the air for better flow •Hand-formed steel covers for a distinctive look that is a perfect match for any Vance & Hines exhaust system •Exhaust, fuel and now air is the complete package •Each includes a high-flow washable and reusable air filter •Made in the U.S.A. DRAK COVER

DUKE COVER PART # CHROME 1010-0475 1010-0477 1010-0476 BLACK 1010-0478 1010-0480 1010-0479

DESCRIPTION

SUG. RETAIL

For 01-10 Twin Cam w/ Delphi EFI (except 08-10 FLHT, FLHR, FLHX, FLTR), 99-06 Twin Cam w/ CV carb For 08-10 FLHT, FLHR, FLHX, FLTR For 04-10 XL For 01-10 Twin Cam w/ Delphi EFI (except 08-10 FLHT, FLHR, FLHX, FLTR), 99-06 Twin Cam w/ CV carb For 08-10 FLHT, FLHR, FLHX, FLTR For 04-10 XL

$259.95 259.95 259.95

279.95 279.95 279.95

PART # CHROME 1022-0052 1022-0055 BLACK 1010-0406 1010-0407

DESCRIPTION

SUG. RETAIL

For 01-10 Twin Cam w/ Delphi EFI (except 08-10 FLHT, FLHR, FLHX, FLTR), 99-06 Twin Cam w/ CV carb For 08-10 FLHT, FLHR, FLHX, FLTR For 01-10 Twin Cam w/ Delphi EFI (except 08-10 FLHT, FLHR, FLHX, FLTR), 99-06 Twin Cam w/ CV carb For 08-10 FLHT, FLHR, FLHX, FLTR

$229.95 229.95

259.95 259.95

VO2 AIR INTAKES ELECTRICAL NAKED •For those wanting to keep the stock look,

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

but not necessarily the stock performance •Vance & Hines now offers its VO2 Air Intake as a high-flow replacement kit for use with your stock air cleaner cover •Designed and manufactured entirely in-house, the VO2 Naked includes a high-flow washable filter element, larger inlet backing plate and billet venturi to get more air in rider’s motor for more power •Made in the U.S.A. PART #

DESCRIPTION

1010-0739

For 08-10 FLHT, FLHR, FLHX, FLTR models

SUG. RETAIL $139.95

1010-0739

PART #

DESCRIPTION

1010-0738

For 01-10 Twin Cam w/Delphi EFI, 99-06 Twin Cam w/CV carb (except 08-10 Dressers, Dyna, X-Bones)

SUG. RETAIL $139.95

CABLES BRAKES TANKS & OIL FILTERS

1010-0450

1010-0298

1010-0270

MO-FLOW™ BILLET AIR CLEANERS

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

354

1010-0211 •Made from aluminum, polished and chrome plated •Available in gloss black, chrome or wrinkle black powder-coated •Hidden fasteners and internal breather assembly make for a clean look •Each air cleaner assembly contains a reusable pleated gauze performance filter that has been engineered and flow tested to obtain maximum flow and protection for your motor •Seal breather assembly velocity plate and all necessary mounting hardware included •This product can be used for any street or racing application where you want maximum performance for the state of California; EO #D-668 NOTE: Adapter for Mikuni carbs sold separately. PART # DESCRIPTION SUG. RETAIL GLOSS BLACK 1010-0450 For 08-10 FLHT, FLHR, FLHX, FLTR $299.95 1010-04451 For 99-06 Twin Cam w/ CV or HSR Mikuni carb, 01-10 Twin Cam w/ Delphi EFI (except 08-10 Dressers) 299.95 1010-0448 For 99-06 Twin Cam w/ S&S E or G carb 299.95 299.95 1010-04441 For 93-99 Evolution Big Twin w/ CV or HSR Mikuni carbs 1010-0447 For 93-99 Evolution Big Twin w/ S&S E or G carb 299.95 1010-04461 For 91-10 XL motors w/ CV carb or HSR Mikuni carb/Delphi EFI 299.95 1010-0449 For 91-06 XL motors w/ S&S E or G carb 299.95 CHROME 1010-0349 For 08-10 FLHT, FLHR, FLHX, FLTR 299.95 1010-02701 For 99-06 Twin Cam w/ CV or HSR Mikuni carb, 01-10 Twin Cam w/ Delphi EFI (except 08-10 Dressers) 299.95 1010-0211 For 99-06 Twin Cam w/ S&S E or G carb 299.95 299.95 1010-02101 For 93-99 Evolution Big Twin w/ CV or HSR Mikuni carbs

PART # DESCRIPTION SUG. RETAIL CHROME (CONT) 1010-0272 For 93-99 Evolution Big Twin w/ S&S E or G carb $299.95 299.95 1010-02121 For 91-10 XL motors w/ CV carb or HSR Mikuni carb/Delphi EFI 1010-0271 For 91-06 XL motors w/ S&S E or G carb 299.95 WRINKLED BLACK 1010-0350 For 08-10 FLHT, FLHR, FLHX, FLTR 299.95 1010-03011 For 99-06 Twin Cam w/ CV or HSR Mikuni carb, 01-10 Twin Cam w/ Delphi EFI (except 08-10 Dressers) 299.95 1010-0299 For 99-06 Twin Cam w/ S&S E or G carb 299.95 299.95 1010-02981 For 93-99 Evolution Big Twin w/ CV or HSR Mikuni carbs 1010-0303 For 93-99 Evolution Big Twin w/ S&S E or G carb 299.95 1010-03001 For 91-10 XL motors w/ CV carb or HSR Mikuni carb/Delphi EFI 299.95 1010-0302 For 91-06 XL motors w/ S&S E or G carb 299.95 1

Requires adapter for Mikuni, PART #HS4 2/001-K, SUG. RETAIL $18.95.

All part numbers in BOLD MAGENTA are new for 2010.


SECTION

6

1010-0421

1010-0316

WINDSHIELDS TOURING LUGGAGE 1010-0420

1010-0317

SEATS & SISSY BARS

VENTURI AIR CLEANERS

EXHAUST

•Exposed filter design that enhance air flow •Backing plate promotes smooth airflow into carburetor/throttle body •Built-in internal crank case breathers •Includes high-volume air filter •All mounting hardware included •Mission and Ronin air cleaners match Roland Sands Design wheels; see TIRES, TUBES & WHEELS section •Made in the U.S.A.

FUEL/AIR SYSTEMS 1010-0722

PART # DESCRIPTION SUG. RETAIL FOR 93-06 BIG TWIN MODELS W/ STOCK CV CARB, 01-10 SOFTAIL MODELS, 04-10 DYNA GLIDE MODELS, 02-07 FLT MODELS W/ DELPHI EFI 1010-0316 Speed 5, chrome $419.95 1010-0317 Speed 5, Contrast Cut™ 419.95 1010-0420 Speed 7, chrome 419.95 1010-0421 Speed 7, Contrast Cut™ 419.95 1010-0720 Mission, Contrast Cut™ 419.95 1010-0726 Ronin, Contrast Cut™ 419.95 FOR 93-06 BIG TWIN MODELS W/ S&S E OR G CARB 1010-0731 Speed 5, chrome 419.95 1010-0730 Speed 5, Contrast Cut™ 419.95 1010-0733 Speed 7, chrome 419.95 1010-0732 Speed 7, Contrast Cut™ 419.95 1010-0734 Mission, Contrast Cut™ 419.95 1010-0736 Ronin, Contrast Cut™ 419.95

PART # DESCRIPTION FOR 08-10 FLT MODELS 1010-0373 Speed 5, Chrome 1010-0374 Speed 5, Contrast Cut™ 1010-0422 Speed 7, chrome 1010-0423 Speed 7, Contrast Cut™ 1010-0718 Mission, Contrast Cut™ 1010-0724 Ronin, Contrast Cut™ FOR 91-10 XL W/ CV CARB/DELPHI EFI 1010-0402 Speed 5, chrome 1010-0403 Speed 5, Contrast Cut™ 1010-0424 Speed 7, chrome 1010-0425 Speed 7, Contrast Cut™ 1010-0722 Mission, Contrast Cut™ 1010-0728 Ronin, Contrast Cut™ RAIN SOCK 1011-1781 For all RSD Venturi air cleaners

TEARDROP AIR CLEANER ASSEMBLIES •Chrome-plated cast aluminum construction •Measures 8” L x 41/2” H x 2” D •Includes mini air filter and all necessary fittings and hardware •Made in the U.S.A.

1010-0728 SUG. RETAIL $419.95 419.95 419.95 419.95 419.95 419.95 419.95 419.95 419.95 419.95 419.95 419.95 29.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1010-0710

CABLES

1010-0708

NOTE: Requires the use of a support bracket and breather kit; sold separately. PART # DESCRIPTION SUG. RETAIL FOR S&S SUPER E & SUPER G CARBS 1010-0708 Slotted $243.95 1010-0710 Ribbed 167.95 FOR KEIHIN CV CARBS AND 01-10 DELPHI FUEL-INJECTION (EXCEPT 08-10 DRESSER) 1010-0709 Slotted 243.95 1010-0711 Ribbed 167.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1010-0196

CHROME BILLET DIAMOND AIR CLEANER ASSEMBLIES AND MOUNTING KITS •Features a “full perimeter flow” intake screen and a washable filter element •Features unique internal crankcase venting through the mounting bolts into the filter chamber (uses no external breathers) •Available in choice of CNC-engraved designs •Includes instructions; mounting hardware sold separately •Made in the U.S.A. PART # DESCRIPTION AIR CLEANER ASSEMBLIES 1010-0196 Flame 1010-0198 Joker 1010-0200 Ball-milled MOUNTING KITS 1021-0003 For 01-10 Twin Cam w/ Delphi EFI (except 08-10 Dressers)

ENGINE

1010-0198 1010-0200 1021-0003 SUG. RETAIL $299.95 299.95 299.95

PART # DESCRIPTION MOUNTING KITS (CONT) 1010-0001 For 99-06 Twin Cam w/ S&S E and G carbs 1013-0012 For 99-06 Twin Cam w/ CV carb 1013-0011 For 93-99 Evolution Big Twin w/ CV carb

39.95

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $49.95 39.95 39.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

355


SECTION

6

WINDSHIELDS 1010-0344

TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

356

1010-0345

CORSAIR AIR CLEANER KITS •Aggressively styled, free-flowing high-performance air cleaner •Chrome-plated die-cast housing features a high-flow air filter element supplied by Advanced Flow Engineering (aFe) for maximum performance, includes crankcase breather support bracket and all necessary installation hardware and brackets •Will support engines making in excess of 100 horsepower •Air cleaner extends approximately 6” straight out and 121/2” forward of the engine •PART #1010-0345 is a Corsair assembly (CV bolt pattern) for use with custom adapters, brackets, etc. for custom installation on models for which a complete kit is not offered NOTE: Installation of this air cleaner may decrease rider legroom. PART # DESCRIPTION 1010-0560 For 08-10 FLHT/FLHR/FLTR/FLHX 1010-0344 For 93-99 Evolution Big Twin w/ CV carb, 99-10 Twin Cam w/ CV carb or Delphi fuel injection (except 08-10 FLHT, FLHR, FLTR and FLHX) 1010-0343 For 91-06 XL w/ CV carb 1010-0345 Corsair air cleaner assembly only 1011-1380 Repl. air filter element 1011-1381 Repl. pre-filter element

SUG. RETAIL $319.95

319.95 319.95 289.95 69.95 32.95

1010-0220

SKULL AIR CLEANER KITS •Extremely rigid, highstrength composite construction •Includes chrome outer cover, backing plate, high-flow air filter element and all necessary brackets, crankcase breathers and other required hardware included •Sold each PART # 1010-0220 1010-0218

DESCRIPTION For 99-10 Twin Cam w/ CV carb or Delphi EFI (except 08-10 FLHT, FLHR, FLTR and FLHX) For 91-06 XL models w/ CV carb

•Features a 50% larger air filter for massive airflow •Internal shape has been modified to allow increased airflow and velocity •One-piece construction, ball-milled, “speed lines” symmetrical butterflies and new “Pro” embossed bearing cups •Edges of Pro Series Hypercharger are radiused for a more streamlined appearance •An upgrade kit is available for new-style (replaceable bearing cup) Hyperchargers and includes a new “Pro” outer case half, bearing cups, butterflies, large K&N air filter and necessary hardware

SUG. RETAIL $239.95 239.95

1010-0152

•A high-performance line of inhaler air cleaners from Küryakyn •Five-spoke, tiered and slotted design enhances looks and performance •Die-cast construction •Large slotted openings enhance airflow •Exclusive K&N air filter design passes air through sides and outer end •Backing plate design minimizes air disturbance as it enters the carburetor or throttle body •Snap-in rings cover carb fasteners; radius of the inside edge of the cleaner is flow-bench tested for optimal airflow •Threaded ports on the backing plate provide convenient locations to connect crankcase breathers or float bowl vents if needed (plugs and fittings included) •Measures approximately 7” in diameter and 3” thick PART # DESCRIPTION CHROME 1010-0152 For 99-06 Twin Cam w/ CV carb or 01-10 Delphi EFI (except 08-10 FLHT, FLHR, FLTR and FLHX) 1010-0153 For 93-99 Evolution Big Twin w/ CV carb 1010-0154 For 91-06 XL w/ CV carb

PRO R HYPERCHARGER™

SUG. RETAIL

$229.95 229.95 229.95

1010-0217

•The best-flowing Hypercharger™ ever produced •Careful redesign of all interior shapes increases airflow •Additional air scoop on outer cover directs air onto the high-flow, washable and reusable air filter •Unrestricted air under high-load riding situations from huge front butterflies are vacuum operated •Include all necessary mounting hardware and crankcase breather kit •PART # 1010-0217 is an assembly (CV bolt pattern) that can be used with adapters, brackets or mounting kits to cover applications that do not have a specific kit PART # 1010-0215

PRO SERIES HYPERCHARGER™

PART # 1010-0151 DS-288938 1010-0147 1010-0149 1010-0150 DS-288937 DS-288936 DS-288939

HI-FIVE AIR CLEANER KITS

1010-0216 1010-0214 1010-0213 1010-0217 1011-1079

DESCRIPTION SUG. RETAIL For 99-06 Twin Cam w/ CV carb and 06-10 w/ Delphi $323.95 EFI (except 08-10 FLHT, FLHR, FLTR and FLHX) For 01-05 Twin Cam w/ Delphi EFI 323.95 For 93-99 Evolution Big Twin w/ CV carb 299.95 For 91-06 XL models w/ CV carb 299.95 Pro R cleaner assembly only 279.95 Repl. K&N air filter (ea.) 59.95

DS-288938

DS-288939

DESCRIPTION W/ chrome butterflies for 01-05 Twin Cam w/ Delphi EFI W/ chrome butterflies for 99-06 Twin Cam w/ CV carb, 06-10 Delphi EFI (except 08-10 FLHT, FLHR, FLTR and FLHX) W/ black butterflies for 99-06 Twin Cam w/ CV carb, 06-10 Delphi EFI (except 08-10 FLHT, FLHR, FLTR and FLHX) W/ chrome butterflies for 99-01 FLT (Dresser and Road King) w/ Magnetti-Marelli EFI W/ chrome butterflies for 95-98 FLT (Dresser and Road King) w/ Magnetti-Marelli EFI W/ chrome butterflies for 93-99 80” Evolution w/ CV carb W/ chrome butterflies for 91-06 XL w/ CV carb Upgrade kit

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $299.95 289.95 289.95 299.95 299.95 289.95 289.95 139.95


SECTION

6

WINDSHIELDS

1010-0156

HYPERCHARGER™ AIR CLEANERS

TOURING

DS-288821

•These air cleaners look great and work even better •Available with a standard (smooth) trap door or our Blood Groove design •Chrome-plated body and trapdoor with either chrome or black butterflies •Include Küryakyn’s breather where applicable

LUGGAGE SEATS & SISSY BARS

SUG. PART # DESCRIPTION RETAIL HYPERCHARGER WITH SMOOTH TRAP DOOR 1010-0156 W/ chrome butterflies for 99-06 Twin Cam w/ CV carb, 06-10 Delphi EFI (except 08-10 FLHTC, FLHT, FLHR, FLTR and FLHX ) $249.95 1010-0157 W/ chrome butterflies for 01-05 Twin Cam w/ Delphi EFI 289.95 1010-0136 W/ chrome butterflies for 93-99 Big Twin w/ S&S E or G series carb 289.95 1010-0139 W/ chrome butterflies for 93-99 Big Twin w/ stock carb and Screamin’ Eagle breather 229.95 1010-0140 W/ chrome butterflies for 93-99 Big Twin w/ stock carb 239.95 1010-0144 W/ chrome butterflies for 92 Big Twin w/ stock carb 229.95 1010-0143 W/ chrome butterflies for 90-91 Big Twin w/ stock carb 229.95 1010-0142 W/ chrome butterflies for 84-89 Big Twin w/ stock or S&S B series carb 229.95 1010-02291 W/ chrome butterflies for 66-84 pre-Evo Big Twin and XL w/ stock carb, S&S B series or QwikSilver II carb 199.95 1010-0155 W/ chrome butterflies for 95-98 Evolution Road King or Dresser w/ Magnetti-Marelli EFI 269.95 1010-0137 W/ chrome butterflies for 91-06 XL w/ stock carb and H-D breather 229.95 1010-0141 W/ chrome butterflies for 91-06 XL w/ stock carb 239.95 1010-0135 W/ chrome butterflies for 88-90 XL w/ stock carb 229.95 1010-0138 W/ metallic gray butterflies for 94-02 Buell w/ stock carburetor (requires mount kit 1010-0230) 199.95 HYPERCHARGER WITH BLOOD GROOVE TRAP DOOR DS-288845 W/ chrome butterflies for 99-01 FLTR, FLHT, FLHR w/ Magnetti-Marelli EFI 289.95 DS-288844 W/ chrome butterflies for 99-06 Twin Cam w/ CV carb, 06-10 Delphi EFI (except 08-10 FLHTC, FLHT, FLHR, FLTR and FLHX) 259.95 1010-0162 W/ chrome butterflies for 01-05 Twin Cam w/ Delphi EFI 289.95

STINGER TRAP DOOR FOR HYPERCHARGER™ •If you have a need for more performance, look no further •Stinger trap door maximizes airflow into the carburetor or throttle body through a high-flow filter element •Highly cost-effective way to boost airflow to any standard Hypercharger •Easy four-bolt replacement for standard trap door •Chrome finish PART # DESCRIPTION 1010-0145 Stinger trap door (ea.)

1

Requires drilling a hole in the Hypercharger back (and mounting bracket where applicable) for float bowl vent.

TWIN VELOCITY™ PLUS AIR CLEANER KITS

SUG. RETAIL $52.95

HYPER STREAMLINER •Gives your Hypercharger™ a whole new look •Beautifully designed insert installs in minutes without any performance loss •Fits all Hyperchargers (except Pro Series Hyperchargers) PART # DESCRIPTION 1014-0001 Hyper Streamliner

SUG. PART # DESCRIPTION RETAIL HYPERCHARGER WITH BLOOD GROOVE TRAP DOOR (CONT) 1010-0161 W/ black butterflies for 99-06 Twin Cam w/ CV carb, 06-10 Delphi EFI (except 08-10 FLHTC, FLHT, FLTR, FLHR and FLHX) $269.95 DS-288821 W/ chrome butterflies for 93-99 Evolution Big Twin w/stock carb 269.95 DS-288822 W/ black butterflies for 93-99 Evolution Big Twin w/stock carb 269.95 DS-288940 W/ chrome butterflies for 93-99 80” Evolution w/ S&S E & G carb 299.95 DS-288823 W/ chrome butterflies for 91-06 XL models w/stock carb 269.95 1010-0163 W/ chrome butterflies for 91-06 XL w/ stock carb and Screamin’ Eagle crankcase breather 239.95 DS-288824 W/ black butterflies for 91-06 XL models w/stock carb 269.95 HYPERCHARGER ACCESSORIES DS-288827 Adapter to mount Hypercharger on S&S E and G carburetors for 93-99 Big Twin and 91-06 XL models (requires PART #DS-288826 adjustable enrichener and 1/2”-13 x 11/2” breather bolts) 45.95 DS-288826 Adjustable enrichener for S&S E and G carbs on 93-99 Big Twin and 91-06 XL models 21.95 1010-0146 Chrome blood groove trap door 25.95 1010-0327 Candy red trap door 19.95 1010-0328 Candy blue trap door 19.95 1010-0329 Chrome trap door 21.95 1010-0347 Black trap door 19.95 1010-0330 Candy red butterflies 15.95 1010-0331 Candy blue butterflies 15.95 1010-0332 Chrome butterflies 15.95 1010-0348 Black butterflies 15.95 DS-288825 Repl. K&N filter element for Hyperchargers listed above 45.95

SUG. RETAIL $39.95

•Slots on both sides and enlarged openings at bottom of housing allow more air to enter the filter •Large, round breather element underneath cover allows air to enter the end of the filter •Teardrop center of cover provides improved airflow and a clean look •Internal crankcase vent system directs gasses and oil droplets into the carburetor induction module, eliminating a mess on the outside of the engine •The result is improved airflow for better performance •Carb adapter and replacement K&N air filter elements sold each •Available with a chrome finish PART # DESCRIPTION TWIN VELOCITY PLUS AIR CLEANERS 1010-0342 For 99-10 Twin Cam w/ stock CV carb or Delphi fuel inejction (except 08-10 FLHTC, FLHR, FLTR) 1010-0341 For 93-99 Evolution Big Twin w/ stock CV carburetor ACCESSORIES 1013-0023 Adapter for S&S carbs for 99-06 Twin Cam DS-289240 Adapter for S&S carbs for 90-99 Evolution Big Twin 1013-0022 Adapter for Mikuni HSR 42/54/48 carburetor for 93-06 Evolution or Twin Cam DS-288862 Repl. primary K&N filter element DS-288863 Repl. secondary K&N filter element

All part numbers in BOLD MAGENTA are new for 2010.

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

SUG. RETAIL

$229.95 229.95 52.95 52.95 42.95 59.95 11.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

357


SECTION

6 Smooth

WINDSHIELDS TOURING LUGGAGE Flame

Comet

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE Enferno

TRANSMISSION & DRIVELINE HIGH PERFORMANCE 6”

DRAGTRON™ II AIR CLEANER

GASKETS & SEALS ELECTRICAL

•Dynamometer-designed radius entry backing plate maximizes air flow and horsepower •2” washable filter is encased in a heavy stainless steel mesh and is easily serviced •Available in chrome finish •Stainless steel hardware is included •Replacement filters available; see page 373 NOTE: Support brackets and breather kits are sold separately.

LIGHTING

U.S. Design Patent #305,149; Taiwan Patent pending. PART # DESCRIPTION DS-289044 For 90-06 Big Twin, 88-06 XL (CV carbs) (will not fit Delphi EFi)

SUG. RETAIL $84.95

HANDLEBARS, CONTROLS & MIRRORS

BIG AIR KIT (BAK)

CABLES BRAKES TANKS & OIL FILTERS 1010-0038

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

358

Pinstripe

FINNED AIR CLEANERS •Unique style allows the engine to show through the teardrop silhouette •Chrome-plated billet aluminum construction •Features a K&N washable filter element for performance and long life •For popular carburetors; mounting brackets available separately •Matching finned horn PART #2107-0009 is available separately •Made in the U.S.A. NOTE: Breather kit must be purchased separately. PART # DESCRIPTION FINNED AIR CLEANERS 1010-0038 For 93-06 Big Twin and 91-06 XL models w/ CV carbs 1010-0039 For 01-10 Big Twin models w/ Delphi fuel injection (except 08-10 Dressers) 1010-0040 For 93-06 Big Twin and 91-06 XL w/ S&S Super E and G carburetors MOUNTING BRACKETS 1013-0001 For 91-06 XL models 1013-0002 For 93-10 Big Twin models (except 08-10 Dressers)

SUG. RETAIL

$464.95 464.95 464.95 47.95 51.95

•Flow bench and dyno designed for substantially increased horsepower and torque •Features beautifully chromed billet cover in your choice of Enferno, Smooth, Flame and Comet designs, or the newest pinstripe design in choice of chrome or black anodized cover •Innovative styling enhances and Pinstripe accentuates your “V” Twin engine (black) •Set-back, thin-line design does not interfere with rider’s leg •Hi-flow reusable filter and specially-designed back plate dynamically increases air flow and velocity •Maximizes overall performance and fuel efficiency •Easily supports engines producing over 120 HP •Complete with breather kit, mounting hardware and micron-fabric rain coat for wet-weather riding •Easy-to-follow instructions included for a do-it-yourself install •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 93-06 BIG TWIN W/ CV CARB, 01-10 TWIN CAM W/ DELPHI EFI (EXCEPT 08-10 DRESSERS) 1010-0481 Smooth $299.95 1010-0524 Flame 299.95 1010-0525 Comet 299.95 1010-0526 Enferno 299.95 1010-0566 Pin stripe 299.95 1010-0568 Pin stripe (black) 299.95 FOR 08-10 FLHT, FLHX, FLTR AND FLHR MODELS 1010-0482 Smooth 299.95 1010-0527 Flame 299.95 1010-0528 Comet 299.95 1010-0529 Enferno 299.95 1010-0567 Pin stripe 299.95 1010-0569 Pin stripe (black) 299.95

All part numbers in BOLD MAGENTA are new for 2010.


SECTION DS-288500

6

WINDSHIELDS TOURING

2110-5003

LUGGAGE

DS-288501

SEATS & SISSY BARS EXHAUST

MALIAIR HIGH-PERFORMANCE AIR CLEANERS •Features high-volume 400cfm design, internal velocity stack and K&N air filter •Available in satin or chrome with a choice of insert •Support bracket and breather kit required and must be purchased separately •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 90-06 CARBURETED BIG TWIN, 01-10 DELPHI FUEL-INJECTED MODELS (EXCEPT 08-10 DRESSERS), 88-06 XL AND ALL 1200CC BUELL MODELS (EXCEPT FUEL-INJECTED MODELS) DS-288500 Satin air cleaner w/ satin insert $285.95 DS-288501 Satin air cleaner w/ black insert 285.95

FUEL/AIR SYSTEMS

PART # DESCRIPTION SUG. RETAIL FOR 90-06 CARBURETED BIG TWIN, 01-10 DELPHI FUEL-INJECTED MODELS (EXCEPT 08-10 DRESSERS), 88-06 XL AND ALL 1200CC BUELL MODELS (EXCEPT FUEL-INJECTED MODELS) (CONT) 2110-5003 Chrome air cleaner w/ black insert $299.95 2110-5004 Chrome air cleaner w/ chrome insert 299.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1010-0712

MOTO INTAKE KITS •CNC-machined aluminum construction •Increases airflow while maintaining a low profile •Cleanable/reusable proprietary air filter has over 130 sq. inches of filter element •Internal velocity stack with internal breathers breathe directly back into venturi •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 93-06 BIG TWIN WITH STOCK CV CARB, 01-10 SOFTAIL, 04-10 DYNA, 02-07 FLT, FLHT WITH DELPHI EFI 1010-0714 Chrome $371.95 1010-0715 Black anodized 371.95 FOR MIKUNI HSR 42MM CARBS 1010-0712 Chrome 371.95 1010-0713 Black anodized 371.95

CABLES BRAKES

ELIMINATOR™ HIGH-FLOW AIR CLEANER •Delivers the airflow an engine needs to run at peak performance •Billet aluminum construction with a hidden breather system for a clean look •Made in the U.S.A. PART # DESCRIPTION 1010-0740 For 90-06 Big Twin and 88-06 XL with 40mm CV carb or 01-10 Delphi EFI (except 08-10 Dressers)

BILLET AIR CLEANER KITS •Solid billet aluminum construction with built-in breather mounts •High-quality heavy-duty construction to prevent cracking under high horsepower applications •Black anodized finish •O-ring grooves elminate time-consuming shimming and oil leaks found in other backing plates •Use stock or aftermarket cover •Includes premium cleanable/reusable air filter, gaskets, O-rings and hardware •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1010-0741 For all JIMS elliptical throttle bodies and Screamin’ Eagle Pro Super Bore 51mm CV carb $336.95 1010-0742 For 08-10 H-D and Screamin’ Eagle Pro high-flow 58mm EFI/ cable-operated throttle bodies 336.95

All part numbers in BOLD MAGENTA are new for 2010.

1010-0742

SUG. RETAIL $373.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

359


SECTION

6

WINDSHIELDS TOURING

1010-0187

1010-0621

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1010-0187

ENGINE

1010-0617

DS-288885

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

360

“BILLET SUCKER” AIR CLEANER ASSEMBLIES •Available in Stage I and Stage II •Both feature an oversize exposed filter design for tremendous airflow •Breather passages exit at the mouth of the carb/throttle body, creating a virtually closed-loop system •Kits include a high-flow air filter, outer cover, backing plate/support bracket and all necessary hardware PART # STAGE I KITS 1010-0355 1010-0357 1010-0613 1010-0186 1010-0187 1010-0614 1010-0615 1010-06161 STAGE II KITS 1010-0356 1010-0358 1010-0621 1010-0359 1010-0617 1010-0188 1010-0189 1010-0622 1010-0190 1010-0618 DS-288885 1010-0066 1010-0623 DS-288884 1010-0619 1010-0065 1010-0596 1010-0595 1010-00641 1010-06241 1010-00621 1010-06201 1

DS-288884

DESCRIPTION

SUG. RETAIL

Smooth, for 08-10 FLHT, FLHR, FLHX, FLTR models (chrome) Scalloped, for 08-10 FLHT, FLHR, FLHX, FLTR models (chrome) Scalloped, for 08-10 FLHT, FLHR, FLHX, FLTR models (black/raw) Smooth, for all 99-06 Twin Cam CV carb and 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, FLHX, FLTR) (chrome) Scalloped, for all 99-06 Twin Cam CV carb and 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, FLHX, FLTR) (chrome) Scalloped, for all 99-06 Twin Cam CV carb and 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, FLHX, FLTR) (black/raw) Scalloped, for all 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam Carb and Delphi EFI models (black/raw) Scalloped, for 91-10 XL models w/ CV carb or Delphi EFI (black/raw)

$214.95 214.95 214.95 214.95 214.95 214.95 214.95 214.95

Smooth, for 08-10 FLHT, FLHR, FLHX, FLTR models (chrome) Scalloped, for 08-10 FLHT, FLHR, FLHX, FLTR models (chrome) Scalloped, for 08-10 FLHT, FLHR, FLHX, FLTR models (black/raw) Grooved, for 08-10 FLHT, FLHR, FLHX, FLTR models (chrome) Retro, for 08-10 FLHT, FLHR, FLHX, FLTR models (chrome) Smooth, for all 99-06 Twin Cam CV carb and 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, FLHX, FLTR) (chrome) Scalloped, for all 99-06 Twin Cam CV carb and 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, FLHX, FLTR) (chrome) Scalloped, for all 99-06 Twin Cam CV carb and 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, FLHX, FLTR) (black/raw) Grooved, for all 99-06 Twin Cam CV carb and 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, FLHX, FLTR) (chrome) Retro, for all 99-06 Twin Cam CV carb and 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, FLHX, FLTR) (chrome) Smooth, for all 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam Carb and Delphi EFI models (chrome) Scalloped, for all 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam Carb and Delphi EFI models (chrome) Scalloped, for all 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam Carb and Delphi EFI models (black/raw) Grooved, for all 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam Carb and Delphi EFI models (chrome) Retro, for all 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam Carb and Delphi EFI models (chrome) Scalloped, for 99-01 Twin Cam FLT fuel-injected models (chrome) Scalloped, for 99-01 Twin Cam FLT fuel-injected models (black/raw) Retro, for 99-01 Twin Cam FLT fuel-injected models (chrome) Scalloped, for 91-10 XL models (chrome) Scalloped, for 91-10 XL models w/ CV carb or Delphi EFI (black/raw) Grooved, for 91-10 XL models (chrome) Retro, for 91-10 XL models w/ CV carb or Delphi EFI (chrome)

224.95 224.95 224.95 224.95 224.95 224.95 224.95 224.95 224.95 224.95 219.95 219.95 224.95 219.95 224.95 224.95 224.95 224.95 224.95 224.95 219.95 224.95

Will fit 88-90 models, breather system is not applicable for these model years.

All part numbers in BOLD MAGENTA are new for 2010.


SECTION

6

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS

DS-288882

1010-0181

“BIG SUCKER” PERFORMANCE AIR FILTER KITS

DS-288880

1010-0180 •Features a one-piece aluminum backing plate/carb support bracket •Eliminates the need for banjo fittings, hoses and filter •Breather passages exit at the mouth of the carburetor/throttle body, creating a virtually closed-loop system •Stage I kit includes a high-flow filter and accepts 93-10 oval or round OEM outer cover •Stage II kit includes a 20% larger high-flow filter and accepts an 8” round Ness or 8” round OEM outer cover •All necessary hardware and instructions are included with each kit

EXHAUST FUEL/AIR SYSTEMS

NOTE: Stage I kit for 08-10 Dynas and XL models will not accept the OEM cover. Must use a round 8” aftermarket cover. PART # STAGE I KITS 1010-0351 1010-0353 1010-0179 1010-0181 DS-288880 DS-288882 1010-00601

DESCRIPTION

SUG. RETAIL

For 08-10 FLHT, FLHR, FLHX, FLTR models (natural) For 08-10 FLHT, FLHR, FLHX, FLTR models (chrome) For 99-06 Twin Cam CV carb and 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, FLHX, FLTR) (natural) For 99-06 Twin Cam CV carb and 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, FLHX, FLTR) (chrome) For 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam carb and Delphi EFI models (natural) For 99-01 FLHTI/FLHRI (natural) For 91-10 XL models (natural)

$129.95 144.95

PART # STAGE II KITS 1010-0352 1010-0354 1010-0180

129.95 1010-0185 149.95 DS-288881 129.95 129.95 129.95

DS-288883 1010-00611 1

DESCRIPTION

SUG. RETAIL

For 08-10 FLHT, FLHR, FLHX, FLTR models (natural) For 08-10 FLHT, FLHR, FLHX, FLTR models (chrome) For 99-06 Twin Cam CV carb and 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, FLHX, FLTR) (natural) For 99-06 Twin Cam CV carb and 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, FLHX, FLTR) (chrome) For 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam carb and Delphi EFI models (natural) For 99-01 FLHTI/FLHRI (natural) For 91-10 XL models (natural)

$139.95 154.95 139.95 159.95 139.95 139.95 139.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1010-0431

CABLES

1010-0434

PART # DESCRIPTION KITS WITH STANDARD FILTER 1010-0432 For 08-10 FLHT, FLHR, FLHX, FLTR models (chrome) 1010-0434 For 08-10 FLHT, FLHR, FLHX, FLTR models (wrinkle black) 1010-0431 For 99-06 Twin Cam CV carb and 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, FLHX, FLTR) (chrome) 1010-0433 For 99-06 Twin Cam CV carb and 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, FLHX, FLTR) (wrinkle black) 1010-0430 For 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam carb and Delphi EFI models (chrome) 1010-0428 For 99-01 FLHTI/FLHRI (chrome) 1010-04291 For 91-10 XL models w/ CV carb or Delphi EFI (chrome) KITS WITH STAINLESS-STEEL JACKETED FILTER 1010-0635 For 08-10 FLHT, FLHR, FLHX, FLTR models (chrome) 1010-0636 For 08-10 FLHT, FLHR, FLHX, FLTR models (black) 1010-0641 For all 99-06 Twin Cam CV carb and 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, FLHX, FLTR) (chrome) 1010-0642 For all 99-06 Twin Cam CV carb and 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, FLHX, FLTR) (black) 1010-0625 For all 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam carb and Delphi EFI models (chrome) 1010-0626 For all 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam carb and Delphi EFI models (black) 1010-0605 For 99-01 Twin Cam FLT fuel-injected models (chrome) 1010-0582 For 99-01 Twin Cam FLT fuel-injected models (black) 1 1010-0581 For 91-10 XL models w/ CV carb or Delphi EFI (chrome) 1010-05701 For 91-10 XL models w/ CV carb or Delphi EFI (black) Will fit 88-90 models also, breather system is not applicable for these model years.

1010-0395

CHEAP SUCKER AIR FILTER KITS •Features a steel backing plate integrated into the filter •Backing plate includes urethane radius inlet •Utilizes factory breather hoses and hardware •Accepts factory outer air cleaner cover only •Made in the U.S.A.

1010-0396

GASKETS & SEALS ELECTRICAL

•Features a one-piece aluminum backing plate support bracket •Eliminates the need for banjo fittings, hoses and filter •Breather passages exit at the mouth of the carburetor/throttle body, creating a virtually closed-loop system •Kit includes a 20% larger high-flow filter and steel outer cover •Pre-oiled filters available in two styles: standard or stainless-steel jacketed •All necessary hardware and instructions are included with each kit •Made in the U.S.A.

PART # 1010-0395

TRANSMISSION & DRIVELINE

Will fit 88-90 models also, breather system is not applicable for these model years.

BIG SUCKER II AIR FILTER KITS WITH COVER

1

ENGINE

DESCRIPTION For 99-06 Twin Cam w/ CV carb, 01-10 Twin Cam w/ Delphi EFI (except 08-10 FLHT, FLHR, FLHX, FLTR) For 08-10 FLHT, FLHR, FLHX, FLTR

SUG. RETAIL $99.95 99.95

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $169.95 169.95 169.95 169.95 169.95 169.95 169.95 189.95 189.95 189.95 189.95 189.95 189.95 189.95 189.95 189.95 189.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

361


SECTION

6

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

BIG SUCKER DERBY COVER AIR FILTER KITS •Unique air filter kits feature a 5-hole mounting system which allows Twin Cam derby covers (not included) to be bolted on as the outer cover •Pre-oiled filters available in two styles: standard or stainless-steel jacketed •All kits include patented Ness hidden breather Big Sucker backing plates in either chrome or powder-coated black wrinkle finish

1010-0633 Shown w/ Battistini Derby Cover

PART # DESCRIPTION SUG. RETAIL KITS W/ STANDARD PRE-OILED FILTER 1010-0631 For 08-10 FLHT, FLHR, FLHX, FLTR models (chrome) $159.95 1010-0633 For 08-10 FLHT, FLHR, FLHX, FLTR models (black) 159.95 1010-0639 For all 99-06 Twin Cam CV carb and 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, FLHX, FLTR) (chrome) 159.95 1010-0640 For all 99-06 Twin Cam CV carb and 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, 159.95 FLHX, FLTR) (black) 1010-0632 For all 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam carb and Delphi EFI models (chrome) 159.95 1010-0634 For all 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam carb and Delphi EFI models (black) 159.95 159.95 1010-0575 For 99-01 Twin Cam FLT fuel-injected models (chrome) 1010-0577 For 99-01 Twin Cam FLT fuel-injected models (black) 159.95 1010-05761 For 91-10 XL models w/ CV carb or Delphi EFI (chrome) 159.95 1010-05781 For 91-10 XL models w/ CV carb or Delphi EFI (black) 159.95

1010-0627 Shown w/ Ness Tech Derby Cover

PART # DESCRIPTION SUG. RETAIL KITS W/ STAINLESS-STEEL JACKETED PRE-OILED FILTER 1010-0627 For 08-10 FLHT, FLHR, FLHX, FLTR models (chrome) $179.95 1010-0629 For 08-10 FLHT, FLHR, FLHX, FLTR models (black) 179.95 1010-0637 For all 99-06 Twin Cam CV carb and 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, FLHX, FLTR) (chrome) 179.95 1010-0638 For all 99-06 Twin Cam CV carb and 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, FLHX, FLTR) (black) 179.95 1010-0628 For all 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam carb and Delphi EFI models (chrome) 179.95 1010-0630 For all 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam carb and Delphi EFI models (black) 179.95 179.95 1010-0571 For 99-01 Twin Cam FLT fuel-injected models (chrome) 1010-0573 For 99-01 Twin Cam FLT fuel-injected models (black) 179.95 1010-05721 For 91-10 XL models w/ CV carb or Delphi EFI (chrome) 179.95 1010-05741 For 91-10 XL models w/ CV carb or Delphi EFI (black) 179.95 1

Will fit 88-90 models also, breather system is not applicable for these model years.

LIGHTING HANDLEBARS, CONTROLS & MIRRORS BILLET SUCKER AND BIG SUCKER COMPONENTS

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

362

•Replacement and optional components for all Ness Billet Sucker and Big Sucker air filter kits

1010-0067

PART # DESCRIPTION SUG. RETAIL REPLACEMENT/OPTIONAL COMPONENTS 1010-0583 Stage I hardware kit for 99-06 Twin Cam CV carb and all 01-10 Twin Cam Delphi EFI models $34.95 1010-0584 Stage I hardware kit for 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam Carb and Delphi EFI models 34.95 1010-0585 Stage I hardware kit for 99-01 Twin Cam FLT fuel-injected models 34.95 1010-0586 Stage I hardware kit for 91-10 XL models 34.95 1010-0591 Stage II hardware kit for 99-06 Twin Cam CV carb and all 01-10 Twin Cam Delphi EFI models 35.95 1010-0592 Stage II hardware kit for 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam Carb and Delphi EFI models 35.95 1010-0593 Stage II hardware kit for 99-01 Twin Cam FLT fuel-injected models 35.95 1010-0594 Stage II hardware kit for 91-10 XL models 35.95 1010-0360 Stage I air filter for 08-10 FLHT, FLHR, FLHX, FLTR models 49.95 2110-9494 Stage I air filter (except for 08-10 FLHT/FLHR/FLHX/FLTR) 49.95 2110-9496 Stage I air filter for DS-288882 only 49.95 1010-0361 Stage II air filter for 08-10 FLHT, FLHR, FLHX, FLTR models 54.95 2110-9495 Stage II air filter element (except for 08-10 FLHT/FLHR/FLHX/FLTR) 54.95 1011-1650 Stage I stainless-steel jacketed air filter for 08-10 FLHT, FLHR, FLHX, FLTR models 69.95 1011-1651 Stage I stainless-steel jacketed air filter for 99-06 Twin Cam CV carb, 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, FLHX, FLTR), 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam carb and Delphi EFI models, 91-10 XL models 69.95 1011-1654 Stage I stainless-steel jacketed air filter for 99-01 Twin Cam FLT fuel-injected models 69.95 1011-1652 Stage II stainless-steel jacketed air filter for 08-10 FLHT, FLHR, FLHX, FLTR models 79.95 1011-1653 Stage II stainless-steel jacketed air filter for 99-06 Twin Cam CV carb, 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, FLHX, FLTR), 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam carb and Delphi EFI models, 99-01 Twin Cam FLT fuel-injected models, 91-10 XL models 79.95 1010-0587 Gasket kit for 08-10 FLT models 6.49 1010-0588 Gasket kit for 99-06 Twin Cam CV carb, 01-10 Twin Cam Delphi EFI (except 08-10 FLHT, FLHR, FLHX, FLTR), 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam Carb and Delphi EFI models 6.49 1010-0589 Gasket kit for 99-01 Twin Cam FLT fuel-injected models 6.49 1010-0590 Gasket kit for 91-10 XL models 6.49 1014-0030 Optional Stage I scalloped outer cover (chrome) 119.95 1014-0044 Optional Stage I scalloped outer cover (black/raw) 119.95 1010-0067 Optional Stage II scalloped outer cover (chrome) 119.95 1014-0045 Optional Stage II scalloped outer cover (black/raw) 119.95 1014-0043 Optional Stage II retro outer cover (chrome) 119.95

All part numbers in BOLD MAGENTA are new for 2010.


SECTION 1010-0606

1010-0607

6

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS

DOUBLE BARREL AIR FILTER ASSEMBLIES •Leading-edge design changes the look and performance of your bike •Includes aluminum double barrel outer cover, aluminum radius inlet backing plate, pre-oiled hi-performance air filter and all necessary hardware •Filter is reusable and washable •Available in chrome or powder-coated black wrinkle finish PART # 1010-0606 1010-0607 1010-0608

DESCRIPTION For 08-10 FLHT, FLHR, FLHX, FLTR models (chrome) For 08-10 FLHT, FLHR, FLHX, FLTR models (black) For all 99-06 Twin Cam CV carb and 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, FLHX, FLTR) (chrome)

SUG. RETAIL $249.95 249.95

249.95

EXHAUST SUG. RETAIL

PART # DESCRIPTION 1010-0609 For all 99-06 Twin Cam CV carb and 01-10 Twin Cam Delphi EFI models (except 08-10 FLHT, FLHR, $249.95 FLHX, FLTR) (black) 1010-0579 For 91-10 XL models w/ CV carb or Delphi EFI (chrome) 249.95 1010-0580 For 91-10 XL models w/ CV carb or Delphi EFI (black) 249.95

FUEL/AIR SYSTEMS ENGINE

AIR FILTER KITS •Stylish, clean custom look that complements the Battistini collection of products •Kits include a patented Arlen Ness Stage-1 Big Sucker air filter kit with a unique-design billet outer cover •Available in show-winning chrome or black anodized with re-machining highlights with either Tri-Bar or Smooth outer cover •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 99-06 TWIN CAM CV CARB AND 01-10 TWIN CAM DELPHI EFI MODELS (EXCEPT 08-10 FLHT, FLHR, FLHX, FLTR AND XL) 1010-0672 Tri-Bar chrome $399.95 1010-0673 Tri-Bar black 399.95 1010-0678 Smooth chrome 399.95 1010-0679 Smooth black 399.95 FOR 08-10 FLHT, FLHR, FLHX, FLTR 1010-0674 Tri-Bar chrome 399.95

TRANSMISSION & DRIVELINE GASKETS & SEALS 1010-0672 1010-0673

PART # DESCRIPTION SUG. RETAIL FOR 08-10 FLHT, FLHR, FLHX, FLTR (CONT) 1010-0675 Tri-Bar black $399.95 1010-0680 Smooth chrome 399.95 1010-0681 Smooth black 399.95 FOR 91-10 XL 1010-0684 Tri-Bar chrome 399.95 1010-0685 Tri-Bar black 399.95 1010-0686 Smooth chrome 399.95 1010-0687 Smooth black 399.95

PART # COVERS 1010-0676 1010-0677 1010-0682 1010-0683

DESCRIPTION

SUG. RETAIL

Tri-Bar chrome Tri-Bar black Smooth chrome Smooth black

$299.95 299.95 299.95 299.95

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1013-0018 •All parts are CNC-machined from billet aluminum stock •Fully polished then chrome plated •Available in old school Finned design or super-compact Round style •Equipped with a high-performance genuine K&N air filter that can be accessed by removing a single screw •Mounting brackets for air cleaners include hardware; required brackets must be purchased separately •Made in the U.S.A. PART # AIR CLEANER 1010-0312 1010-0313 1010-0394

DESCRIPTION ASSEMBLIES Old School Finned w/ 4” dia. filter 4” round style w/ 4” dia. filter 6” Retro-Finned round style w/ 6” dia. filter

SUG. RETAIL $299.95 229.95 299.95

AIR CLEANER ASSEMBLIES

BRAKES 1010-0312 1010-0313

SUG. RETAIL $249.95 259.95 249.95

1013-0019

PART # DESCRIPTION MOUNTING BRACKETS 1013-0018 For 93-99 Evolution Big Twin w/ Mikuni carb 1013-0019 For 99-06 Twin Cam w/ Mikuni carb 1013-0020 For 93-99 Evolution Big Twin w/ S&S carb

1010-0692 •At last, a high-quality and highperformance air cleaner unit for latemodel EFI and carbureted Sportsters •Super-clean design features all-CNCmachined billet aluminum construction throughout •Equipped with a genuine K&N 4” diameter high-flow filter •Has Joker’s exclusive “baffle plate” internal crankcase breathing system held all together with high-strength 12-point mounting bolts •Improves leg clearance over the stock air cleaner assembly due to its compact design •Available in your choice of black anodized, clear anodized (silver) and chrome plated finishes •Made in the U.S.A. PART # DESCRIPTION FOR 07-10 XL MODELS (EFI) 1010-0692 Black anodized 1010-0693 Chrome-plated 1010-0694 Clear anodized

CABLES

1010-0394

AIR CLEANER ASSEMBLIES WITH K&N FILTERS

SUG. RETAIL

TANKS & OIL FILTERS

$109.95 119.95 169.95

DASHES & GAUGES

1010-0693

PART # DESCRIPTION FOR 91-06 XL MODELS (CARB) 1010-0695 Black anodized 1010-0696 Chrome-plated 1010-0697 Clear anodized

All part numbers in BOLD MAGENTA are new for 2010.

1010-0694

SUG. RETAIL $249.95 259.95 249.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

363


SECTION

6

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS DS-289606

1010-0550 DS-289604

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

POWER PACC™ AIR CLEANERS •High-performance air cleaner system provides dramatic out-of-the box performance gains of up to 15% •Precision-machined, one-piece billet backing plate eliminates flimsy brackets •Snap-in venturi creates 100% unobstructed air flow for increased horsepower and torque through the entire rpm range •Includes specially designed washable extra-high-volume reusable air filter •All kits include complete premium mounting hardware •Accept most aftermarket or stock-style air cleaner covers •Available with or without Doherty Machines’ patented PowerVents™ •Instructions included for simple installation •Made in the U.S.A. NOTE: Not for use with Magneti-Marelli fuel injection systems. PART # DESCRIPTION SUG. RETAIL AIR CLEANER FOR USE WITH OEM COVER DS-289605 For 99-06 Twin Cam $233.95 DS-289604 For 93-99 80” Big Twin 233.95 1010-0550 For 08-10 FLHT/FLHR/FLHX/FLTR 323.95 AIR CLEANER WITH POWERVENT FOR USE WITH OEM COVER DS-289607 For 99-06 Twin Cam 316.95 DS-289606 For 93-99 80” Big Twin 316.95 AIR CLEANER FOR USE WITH S&S TEARDROP COVER 2110-1258 For 00-06 Twin Cam 238.95 2110-1259 For 93-99 80” Big Twin 238.95 2110-1260 For 84-92 80” Big Twin 238.95

PART # DESCRIPTION SUG. RETAIL AIR CLEANER WITH POWERVENT FOR USE WITH S&S TEARDROP COVER 2110-1257 For 99-06 Twin Cam $325.95 2110-1256 For 93-99 80” Big Twin 325.95 AIR CLEANER WITH POWERVENT FOR USE WITH OEM OR AFTERMARKET COVER 1010-0037 For 01-10 Delphi fuel-injected models (except 08-10 Dresser, 08-10 Dyna, 07-10 XL) 299.95 REPLACEMENT COMPONENTS DS-289615 Repl. air filter w/ breather washers and O-ring 63.95

1010-0565 1010-0563

CABLES

1013-0039

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1010-0564

FRAMES, INDUCTION AIR CLEANERS AND BRACKETS SUSPENSION TUNED 1011-0898 •Swept forward, 2-into-1 design rams additional air into the cylinder & FENDERS •Natural supercharging effect increases mid-range torque 1011-0897 twice the filter area of a teardrop air cleaner FOOTRESTS •Nearly •Air cleaners are available in several different finishes & LICENSE •Chrome bracket kits feature a support bracket and breather system all in one PLATE FRAMES •Air cleaner and bracket kits must be purchased separately •Made in the U.S.A. 1011-1336 SUG. SUG. TIRES, DESCRIPTION RETAIL PART # DESCRIPTION RETAIL TUBES & PART # CHROME BRACKET KITS (CONT) WHEELS TUNED INDUCTION AIR CLEANERS 1010-0563 Aluminum (burnished) $230.95 1013-0040 For S&S 124” motors w/ S&S single-bore fuel-injection $251.95 241.95 1013-0041 For 95-10 Big Twin w/ S&S single-bore fuel-injection HARDWARE, 1010-0564 Wrinkle powder coat (except 08-10 Touring) 251.95 251.95 CHEMICALS 1010-0565 Chrome REPLACEMENT COMPONENTS & TOOLS CHROME BRACKET KITS 48.95 1013-0039 For 84-06 Big Twin models w/ S&S E/G series carbs 251.95 1011-0897 Repl. red filter w/ clamp (ea.) 1011-0898 Opt. blue filter w/ clamp (ea.) 48.95 COVERS, 1013-0042 For 90-06 Big Twin models w/ CV carb and 01-10 Big Twin models w/ Delphi EFI (except 08-10 Touring) 251.95 1011-1336 Moisture repellant rain cover for S&S tuned SECURITY induction filters (pr.) 38.95 251.95 & GENERAL 1013-0038 For S&S 124” motors with S&S E/G series carb

364

All part numbers in BOLD MAGENTA are new for 2010.


SECTION

6

WINDSHIELDS TOURING

1010-0705

TUNED INDUCTION AIR CLEANER KITS •Complete kit includes everything needed for simple bolt-on installation on stock throttle bodies •Available in chrome or black wrinkle power-coat finish on runners •Made in the U.S.A.

1010-0706

PART # DESCRIPTION FOR 08-10 FLHT, FLHR, FLHX, FLTR MODELS 1010-0705 Wrinkle black 1010-0706 Chrome

1010-0419

LUGGAGE SEATS & SISSY BARS

SUG. RETAIL $387.95 452.95

EXHAUST

1010-0325

FUEL/AIR SYSTEMS ENGINE 1010-0236

TRANSMISSION & DRIVELINE GASKETS & SEALS

AIR CLEANERS

ELECTRICAL

1010-0235

•Original S&S chrome teardrop air cleaner assemblies •Include an S&S cover, backing plate and high-quality filter element and hardware kit •Increase horsepower with no other changes •Available for most OEM carburetors •Made in the U.S.A.

1011-1721

LIGHTING

NOTE: Covers may need to be notched when used with custom or 5-gallon or larger fuel tanks.

1014-0040

NOTE: Installation of an S&S air cleaner may require re-jetting. PART # DESCRIPTION AIR CLEANERS FOR S&S CARBURETORS DS-289137 For E & G series carbs on 99-06 Twin Cam models DS-289211 For E & G series carbs on 92-99 Evolution Big Twin models DS-289129 For E & G series carbs on 84-92 Big Twin and 86-90 XL models AIR CLEANERS FOR STOCK H-D CARBURETORS/FUEL-INJECTION SYSTEMS 1010-0419 For 08-10 EFI Touring models 1010-0325 For CV carbs on 93-06 Big Twin, 01-10 Big Twin w/ Delphi EFI models (except 08-10 Touring) 1010-0326 For CV carbs on 91-06 XL DS-289401 For Keihin carbs on 84-89 Big Twin and 86-87 XL models DS-289400 For CV carbs on 94-02 Buell models AIR CLEANERS FOR SINGLE-BORE EFI MODELS 1010-0237 For stock H-D heads or S&S heads for stock or 4” bore, teardrop 1010-0236 For stock H-D heads or S&S heads for stock or 4” bore, Desperado 1010-0235 For S&S heads for 41/8” bore, Desperado REPLACEMENT COMPONENTS DS-289404 Repl. S&S air cleaner cover for E & G carb DS-289403 Repl. S&S air cleaner cover for S&S CV air cleaner and Super B carbs 1014-0040 Repl. chrome Desperado-style air cover; repl. for all E & G carbs DS-289405 Repl. air cleaner cover screws (10-pk.) 1011-0324 Repl. crankcase breather hose for 93-06 Big Twin, 91-06 XL and 94-02 Buells 1011-0325 Breather screw seals (silicone-coated steel washer), .520” i.d. (10-pk.) 1011-0326 Breather screw seals (silicone-coated steel washer), .380” i.d. (10-pk.) 1011-1721 Repl. filter element for DS-289137, DS-289211, DS-289128, DS-289129, DS-289130, 1010-0325 and 1010-0326 DS-289409 Repl. filter element for DS-289070, DS-289400, DS-289401, DS-289402, DS-289410 and S&S Super B

SUG. RETAIL $208.95 208.95 208.95

CABLES

250.95 218.95 218.95 221.95 221.95

BRAKES

208.95 208.95 208.95 130.95 130.95 130.95 .95 5.95 1.25 1.25 16.95 15.95

1011-0323

HIGH-FLOW AIR FILTER AND ADAPTER KIT

•High-flow filter designed especially for Super E and G carburetors •Filter is 1” taller than standard filter and features a low-restriction, pre-oiled filter element •Allows for a 37% increase in airflow •Filter and adapters extend the teardrop housing out 1” for better exposure and a high-performance street racer look •Kit installs in minutes; no permanent modifications required •Made in the U.S.A. NOTE: Not for use with S&S Super B or Super D carburetors, or Super E and G Kits for Buells. PART # 1011-0323

DESCRIPTION For S&S Super E and G carbs

SUG. RETAIL $49.95

PART # 1011-1337

DESCRIPTION Repl. element

All part numbers in BOLD MAGENTA are new for 2010.

HANDLEBARS, CONTROLS & MIRRORS

SUG. RETAIL $20.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

365


SECTION

6

WINDSHIELDS

1010-0671 1010-0294 1010-0273

TOURING 1011-0520

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1010-0417

RK-SERIES INTAKE ASSEMBLIES

1010-0322

•Complete intake assembly fits neatly behind the stock air cleaner cover •Provide a significant increase in airflow, smoother delivery to engine, while boosting performance and filtration •Feature a K & N High-Flow air filter, pleated design for optimum airflow, specially designed lip seal for perfect seal, powder-coated billet aluminum backplate (except PART #1010-0417 which is cast aluminum) that eliminates external breathers and a built-in, dyno-tuned velocity stack •Maintain factory appearance, utilizes the stock air cleaner outer cover •Twin Cam version available in two heights: 15/8” tall (stock) or 21/4” tall (large capacity) •Made in the U.S.A. NOTE: C.A.R.B. approved for 99-06 models. PART # DESCRIPTION SUG. RETAIL FOR 99-06 TWIN CAM W/ CV CARB, 01-10 TWIN CAM W/ DELPHI EFI (EXCEPT 08-10 FLSTSB, DYNA AND DRESSER MODELS) $173.95 1011-0520 Stock capacity filter assembly; 15/8” tall 1011-1388 Repl. filter for part number 1011-0520 15/8” tall 60.95 1010-0273 Large capacity filter assembly; 21/4” tall 216.95 1010-0294 Upgrade filter kit for PART #1011-0520 (includes 128.95 longer spacers); 21/4” tall 1010-0295 Repl. filter for PART #1010-0273; 21/4” tall 66.95 FOR 08-10 FXD/FXDB/FXDC/FXDF/FXDL/FXDWG 1010-0671 Large capacity filter assembly; 21/8” tall 249.95 1011-1736 Repl. filter for PART #1010-0671; 21/4” tall 69.95

SUG. RETAIL $249.95 79.95 340.95 69.95

RK3901

RK SERIES BILLET AIR FILTER ASSEMBLIES •Chrome-plated polished billet aluminum cover •Round or Teardrop, Flames, Ball-Grooved or Mirror Finish •Includes K&N Original High-Flow Air Filter •Provides a substantial increase in horsepower •Pleated design provides optimum airflow •Powder-coated billet aluminum backing plate •Spacers and hardware included •Specially designed drycharger extends service intervals and is pre-treated to repel water; sold separately

RK3902 RK3911

RK3912

PART # DESCRIPTION FOR 92-99 80” BIG TWIN WITH OEM CARB RK3901 Smooth round filter assembly RK3911 Grooved round filter assembly RK3902 Smooth teardrop filter assembly RK3912 Grooved teardrop filter assembly RK-3922 Flame teardrop filter assembly FOR 91-97 XL 1200 WITH OEM CARB RK3903 Smooth round filter assembly RK3913 Grooved round assembly

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE CUSTOM AIR PLATE FRAMES CLEANER ASSEMBLIES •Designed to fit Harley-Davidson TIRES, motorcycles equipped with TUBES & various carburetors WHEELS •Increase horsepower with proper carburetor calibration HARDWARE, •These air cleaners mount directly to CHEMICALS the carburetor flange 1010-0314 & TOOLS •Made in the U.S.A. PART # DESCRIPTION COVERS, 1010-0314 S&S carbs and 84-89 Keihin butterfly carbs; 5” dia. and polished outer cover (excluding all S&S E & G carbs) SECURITY & GENERAL 1011-1058 36-38mm Mikuni carbs; 5” dia. open round style

366

PART # DESCRIPTION FOR 08-10 FLHT/FLHR/FLHX/FLTR MODELS 1010-0417 Large capacity filter assembly; 15/8” tall 1011-1509 Repl. filter for PART #1010-0417; 21/4” tall FOR 04-10 XL 883/1200 MODELS 1010-0322 Large capacity filter assembly; 21/4” tall 1011-1451 Repl. filter for PART #1010-0322; 23/8” tall

SUG. RETAIL $240.95 227.95 227.95 240.95 240.95 240.95 227.95

RK3922

PART # DESCRIPTION FOR 91-97 XL 1200 WITH OEM CARB (CONT) RK3904 Smooth teardrop filter assembly RK3914 Grooved teardrop filter assembly RK3924 Flame teardrop filter assembly REPLACEMENT FILTERS/DRYCHARGERS E-3333 Repl. teardrop-style filter E-3336 Repl. round-style filter RK-3901PK Drycharger for round filter assembly RK-3902PK Drycharger for teardrop filter assembly

SUG. RETAIL $227.95 240.95 240.95 59.95 58.95 24.95 24.95

1011-1059

1011-1060 1011-1058

SUG. RETAIL $71.95 59.95

PART # 1011-1059 RC-0920 1011-1060

DESCRIPTION 36-38mm Mikuni carbs; 6” dia. chrome bonnet style 40-45mm Mikuni carbs; 5” dia. open round style 40-45mm Mikuni carbs; 6” dia. chrome bonnet style

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $71.95 61.95 71.95


SECTION

6

WINDSHIELDS AIRCHARGER PERFORMANCE INTAKE KITS •K&N High-Flow air filter greatly increases performance and horsepower •Mandrel bent aluminum intake tube available in two finishes: polished bright mirror or textured black •Kit includes complete breather assembly and all necessary mounting hardware •Drycharger™ included for increased protection from the elements •Replacement Drycharger™ available separately •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 08-10 FLHR, FLHT, FLHX, FLTR MODELS 1010-0555 Black $329.95 1010-0556 Polished 349.95

1010-0556

TOURING 1011-1520

1010-0555

LUGGAGE

PART # DESCRIPTION FOR 08-10 FLHR, FLHT, FLHX, FLTR MODELS (CONT) 1011-1520 Repl. drycharger

SUG. RETAIL

SEATS & SISSY BARS

$30.95

EXHAUST

xXx AIR CLEANER ASSEMBLIES

1010-0561

•xXx air cleaner provides quicker, smoother and stronger acceleration •Kit replaces the OEM air cleaner assembly, maintaining balance and symmetry •Custom-made AirRaid air filter provides increased airflow volume to the engine •Dyno-designed AirLoad backing plate reduces turbulence and increases air intake velocity, boosting horsepower and torque •3-D mesh X covers are beautifully stylized, adding dimension •Exposes more of the engine and brings out its aggressive nature •Machined from T6 6061 billet aluminum •Complete hardware kit and instructions included for easy installation •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL CHROME 1010-0418 For 93-06 Big Twin w/ CV carb, 01-10 Twin Cam w/ Delphi EFI (except 08-10 Dresser) $249.95 1010-0561 For 08-10 FLHT/FLHR/FLTR/FLHX 249.95 1010-0562 For 91-10 XL 249.95

FUEL/AIR SYSTEMS

1010-0698

ENGINE TRANSMISSION & DRIVELINE PART # BLACK 1010-0698 1010-0699 1010-0700

DESCRIPTION

SUG. RETAIL

For 93-06 Big Twin w/ CV carb, 01-10 Twin Cam w/ Delphi EFI (except 08-10 Dresser) For 08-10 FLHT/FLHR/FLTR/FLHX For 91-10 XL

$249.95 249.95 249.95

GASKETS & SEALS ELECTRICAL

FILTER UPGRADE KITS •Easy-to-install filter upgrade for Screamin’ Eagle air cleaners •PART #1011-1411 includes a 3” deep washable reusable filter element with 60% more surface area than the Screamin’ Eagle kit filter •PART #1011-0782 includes a specially designed, washable pleated fabric filter that is 5/8” deeper than the factory performance filter it is designed to replace – more surface area provides more airflow is achieved (9+%) and more power is the result •Required mounting hardware supplied with both kits •Made in the U.S.A. PART # 1011-1411

DESCRIPTION For 08-10 FLHT, FLHR, FLHX and FLTR models w/ Screamin’ Eagle air cleaner kit OEM #29260-08

SUG. RETAIL $69.95

PART # 1011-0782

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1011-0782

DESCRIPTION For 99-10 Twin Cam w/ Screamin’ Eagle air cleaner kit OEM #29440-99C (except 08-10 FLHT, FLHR, FLHX, FLTR)

SUG. RETAIL

CABLES

$64.95

BRAKES 1010-0132

TANKS & OIL FILTERS

1010-0131

DASHES & GAUGES 1010-0311

PRO-MOD BREATHER KIT WITH AIR CLEANER •Designed to be modular by allowing a custom look, and adds horsepower •Can be used as a complete system or as just a Pro-Mod Breather •Machined from solid 6061 T-6 billet aluminum with a unique internal breather design (no hoses) •Accepts stock Screamin’ Eagle air cleaner cover – Yost round air cleaner included •Includes all necessary hardware for easy installation •Made in the U.S.A. PART # RAW FINISH 1010-0132 1010-0131 CHROME FINISH 1010-0310 1010-0311

DESCRIPTION

SUG. RETAIL

For 99-06 Twin Cams w/ CV carburetor or 01-10 w/ Delphi fuel injection (except 08-10 Dresser) For 93-99 Evolution Big Twins w/ CV carb

$196.95 196.95

For 99-06 Twin Cams w/ CV carburetor or 01-10 w/ Delphi fuel injection (except 08-10 Dresser) For 93-99 Evolution Big Twins w/ CV carb

308.95 308.95

All part numbers in BOLD MAGENTA are new for 2010.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

367


SECTION

6

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

“BOB” RETRO-STYLE AIR CLEANER STAMPED STEEL DRAGTRON™-STYLE AIR CLEANER DS-288999 •Stamped steel version of our popular die-cast Dragtron air cleaner •Fits Bendix, Keihin and Tillotson carburetors PART # DESCRIPTION SUG. RETAIL DS-288999 Air cleaner $28.95 DS-289043 Repl. foam element 4.95

•Retro-style chrome-plated air cleaner measures 51/2” in diameter •Has a re-useable foam filter element •All necessary mounting hardware included •Replacement filter element available separately NOTE: Requires appropriate carb support bracket. 1010-0192 PART # DESCRIPTION 1010-0191 For CV and Delphi fuel-injected applications (except 08-10 Dressers) 1010-0192 For S&S E and G series carburetors 1011-0881 Repl. air filter element

SUG. RETAIL $64.95 64.95 14.95

7” ROUND AIR CLEANERS •Chrome air cleaners fit Harley models equipped with Bendix DS-288903 or Keihin carburetors •PART #DS-288903 will require a support brace or a brace/breather kit for models listed (sold separately) •Air filter included PART # DESCRIPTION DS-288903 For 90-06 Big Twin and 88-06 XL models w/ OEM CV carb, 01-10 Twin Cam w/ Delphi EFI (except 08-10 Dressers) DS-288998 For Bendix and Keihin (not CV) carbs

AIR CLEANER ADAPTER •CNC-machined with a polished aluminum finish •Enables you to mount a CV or S&S E and G-style air cleaner to a Mikuni HSR 42/45/48mm carb •Eliminates the stock O-ring mount and provides a secure fit •Comes with mounting hardware, gasket and breather washers •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 7805-0032 Air cleaner adapter $55.95

CABLES

1010-0552

1010-0553

AIR CLEANER ADAPTERS

SUG. RETAIL

•Allows installation of a Dragtron II air cleaner (DS-289044) to models listed •Plain machined finish PART # DESCRIPTION 1010-0552 For 08-10 FLHT, FLHX, FLHR, FLTR models 1010-0553 For 01-10 models w/ Delphi EFi

SUG. RETAIL $24.95 19.95

$49.95 39.95

BILLET SUCKER STAGE 1 COVERS •Machined from 6061 T-6 aluminum •Available in showwinning chrome or black anodized with re-machining highlights 1010-0683 1010-0682 •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR ARLEN NESS BILLET SUCKER, BIG SUCKER TWIN CAM AND SCREAMIN’ EAGLE TAPERED KITS 1010-0676 Tri-Bar chrome $299.95 1010-0677 Tri-Bar black 299.95 1010-0682 Smooth chrome 299.95 1010-0683 Smooth black 299.95

BRAKES 7806-1918 7806-1918

2110-1903 2110-1903

TANKS & OIL FILTERS CHROME SHOW-OFF COVERS DASHES & GAUGES

•Simple and easy way to dress up your Forcewinder XR or Forcewinder XR-2 air cleaner •Available in two designs: Hot Rod and Tribal •Includes cover, two-sided tape and mounting screws •For use with K&N or Force filter elements only •Made in the U.S.A.

FORCE AIR CLEANER COVER •Steel accent piece adds even more style to your Force air cleaner cover •Every cover is made by hand and then chrome plated •Made in the U.S.A.

FRAMES, NOTE: K&N air filters say K&N on the filter; Force filters say Force on SUSPENSION the filter. SUG. SUG. PART # DESCRIPTION & FENDERS PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL 1010-0086 Chrome Force air cleaner cover FOOTRESTS FOR K&N FILTER FOR FORCE FILTER $163.95 7806-1918 Hot Rod $163.95 & LICENSE 7806-1917 Hot Rod 163.95 2110-1903 Tribal 163.95 PLATE FRAMES 2110-1902 Tribal TIRES, 8” AIR TUBES & CLEANER COVER WHEELS •Die-cast aluminum HARDWARE, AIR CLEANER FAIRING with a chrome finish •For Ness stage I and II “Big CHEMICALS •Bolts directly to Screamin’ Eagle Sucker” kits or Big Twin & TOOLS air filters Screamin’ Eagle backing plates •Chrome finish •Made in the U.S.A. COVERS, •Made in the U.S.A. PART # DESCRIPTION DESCRIPTION SUG. RETAIL SECURITY PART # DS-288949 Smooth Chrome air cleaner cover $299.95 & GENERAL 1010-0088

SUG. RETAIL $149.95

®

368

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $79.95


SECTION 1010-0716

1010-0716

6

WINDSHIELDS

8634

TOURING CUSTOM AIR CLEANER COVERS

LUGGAGE

•Stylish covers fit over your favorite air cleaner •Composite fiberglass construction yields both strength and light weight •Available in Street Sweeper design •Available for S&S and OEM air cleaners PART # 8624 8634

DESCRIPTION For all S&S air cleaners For round OEM CV air cleaner

1010-0164

SUG. RETAIL $96.95 96.95

1010-0165

SEATS & SISSY BARS

1010-0717

SCARAB AIR CLEANER COVERS

EXHAUST

•Stylish upgrade for the OEM air cleaner assembly •Contoured design adds a racy touch •Chrome grille openings allow additional airflow

FUEL/AIR SYSTEMS

SUG. PART # DESCRIPTION RETAIL 1010-0716 For 02-10 FLHT, FLHR, FLTR, FLHX (except CA models w/ carburetor), 01-10 FXST/FLST (except 08-10 FLSTSB and CA models w/ carburetor), 04-07 FXD/FXDWG $69.95 1010-0717 For 99-03 FXD/FXDWG, 04-05 FXD/FXDWG, FXDX (CA model only), 99-06 FLHT, FLHR, FLTR, FLHX (CA models only), 02-05 FLHTI (CA model), 00-06 FXST/FLST (CA models w/ carburetor) 69.95

SKULL AIR CLEANER COVER •Replacement cover for the standard teardrop cover on S&S E or G series air cleaners •Skull motif flows cleanly down the side of the cover for a unique look •High-strength composite material construction with a chrome-plated finish •Installs quickly and easily with supplied hardware PART # DESCRIPTION 1010-0164 Satin black 1010-0165 Chrome

TRANSMISSION & DRIVELINE GASKETS & SEALS

AIR CLEANER COVER PLUGS

SUG. RETAIL $104.95 146.95

ENGINE

•Genuine James Gaskets® cover plugs replace those found in OEM air cleaners on 86-91 Big Twin models; repl. OEM #738 •Sold in 10-pk. •Made in the U.S.A. PART # DESCRIPTION DS-173431 Air cleaner cover plugs

ELECTRICAL SUG. RETAIL $.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

1015-0110

SMOOTH STYLE CARBURETOR COVER •Available in a teardrop design •Comes without element •Features a chrome finish PART # DESCRIPTION 1015-0099 For S&S carburetors on 84-91 Big Twin

DS-288831

DS-288842

1014-0006

DS-288841

BRAKES TANKS & OIL FILTERS

DS-288836

DASHES & GAUGES

SUG. RETAIL $68.95

1010-0007

DS-288835

CHROME BILLET AIR CLEANER INSERTS

FIVE-BOLT DOMED AIR CLEANER INSERT •Die-cast insert with a chrome finish •Matches the five-bolt style of OEM derby cover SUG. PART # DESCRIPTION RETAIL DS-288929 For 99-10 OEM Twin Cam air cleaners (except 08-10 Dyna) $37.95

•Available in a variety of designs •Sold each •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 99-10 TWIN CAM ROUND AIR CLEANER (EXCEPT 08-10 DYNA) 1014-0007 Joker $69.95 1015-0110 Finned 69.95 DS-288841 Flame 69.95 DS-288842 Smooth 69.95 1014-0006 Hot Head 69.95 1010-0007 Ball-milled 69.95

PART # DESCRIPTION SUG. RETAIL FOR 84-99 EVOLUTION ROUND AIR CLEANER DS-288831 Joker $81.95 DS-288829 Flame 81.95 1014-0037 Hot Head 79.95 DS-288832 Smooth 81.95 FOR S&S E AND G SERIES TEARDROP AIR CLEANER DS-288835 Joker 82.95 DS-288833 Flame 82.95 DS-288836 Smooth 82.95

All part numbers in BOLD MAGENTA are new for 2010.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

369


SECTION

6

WINDSHIELDS TOURING LUGGAGE 1010-0416

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1010-0534

GASKETS & SEALS ELECTRICAL

1014-0047

1014-0048

1014-0049

•CNC-machined billet aluminum construction •Finned style •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 99-10 OEM TWIN CAM AIR CLEANER (EXCEPT 08-10 DYNA) 1010-0415 Black $129.95 1010-0416 Chrome 129.95 1010-0534 Black diamond cut 179.95

1010-0610

ENGINE TRANSMISSION & DRIVELINE

1014-0046

AIR CLEANER INSERTS

AIR CLEANER INSERTS

AIR CLEANER INSERTS •Billet inserts mount directly over factory air cleaner covers •Sold in pairs PART # DESCRIPTION FOR 99-10 TWIN CAM (EXCEPT 08-10 DYNA) 1010-0610 Retro 1010-0611 Grooved 1010-0612 Smooth

SUG. RETAIL $69.95 69.95 69.95

•High-quality inserts for a sleek, custom look •Constructed of 6061 T6 aluminum •Available in two distinct styles with chrome or black-anodized finish •Easy installation •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 99-10 TWIN CAM W/ STOCK AIR CLEANER COVER (EXCEPT 08-10 DYNA) 1014-0046 Lefty series, black $94.95 1014-0047 Lefty series, chrome 94.95 1014-0048 Waterfall series, black 105.95 1014-0049 Waterfall series, chrome 105.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES DS-288820

DS-288816

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

AIR CLEANER INSERTS •Bolt-on inserts give a customized look to aftermarket or OEM air cleaner •Constructed of billet aluminum and available in a chrome finish DS-289069C •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 99-10 TWIN CAM MODELS WITH OEM AIR CLEANER (EXCEPT 08-10 DYNA) DS-288819 Millennium smooth $77.95 DS-288820 Millennium ball-milled 77.95 FOR 84-99 80” BIG TWIN ROUND AIR CLEANER DS-288816 Millennium smooth 88.95 FOR S&S E AND G AIR CLEANER DS-289069C Ball-milled 99.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, LIVE TO RIDE AIR CHEMICALS CLEANER INSERT construction & TOOLS •Die-cast with chrome finish COVERS, •Fits OEM air cleaner SECURITY PART # & GENERAL 1014-0039

370

1022-0001

1022-0002

INJECTI-COVERS™ •Constructed from 16-gauge cold rolled steel, polished then chrome-plated •Great looking covers hide the OEM throttle body •Offer a true custom look •Made in the U.S.A.

1022-0003

NOTE: Covers may not fit with all styles of breather kits and support brackets. Check clearance before mounting.

DESCRIPTION For 04-10 XL

SUG. RETAIL $42.95

PART # DESCRIPTION SUG. RETAIL 1022-0001 For 95-01 FLT EFI models w/ OEM or Screamin’ Eagle air filter $49.95 1022-0002 For 01-05 FXST/FLST models, 04-05 Dyna and 02-05 FLT w/ Screamin’ Eagle air filter 59.95 1022-0003 For 01-05 FXST/FLST models, 04-05 Dyna and 02-05 FLT w/ Forcewinder or D&M-style air intake system 149.95

All part numbers in BOLD MAGENTA are new for 2010.


SECTION

6

WINDSHIELDS TOURING 1011-1203 1011-0320

1011-0319

1011-0322

LUGGAGE SEATS & SISSY BARS EXHAUST

1011-0318

1011-0321

FUEL/AIR SYSTEMS ENGINE

1011-0784

TRANSMISSION & DRIVELINE 1011-0317 1011-0312

GASKETS & SEALS ELECTRICAL

1011-0313

1011-1067

LIGHTING 1011-0315

HANDLEBARS, CONTROLS & MIRRORS

1011-1204

1011-0314

1011-0316

PREMIUM REUSABLE AIR FILTERS

CABLES

•Durable epoxy-coated wire mesh designed to maximize airflow and provide peak filtration •100% reusable and washable •High-flow four-layer surgical-grade cotton filtration •Urethane body that won’t crack or curl like rubber •Precision hand-poured design •Made in the U.S.A. NOTE: For cleaner use PART # 3704-044; For oil use PART # 3610-0013. YEAR MODEL FOR BIG TWIN 99-10 Twin Cam (exc. 99-01 EFI, 08-10 Dresser, 08-10 Dyna Glide, 08-10 FLSTSB) 08-10 FLHT/FLHR/FLTR/FLHX 99-01 88” Twin Cam (w/ Magneti-Marelli EFI) 95-98 80” Evolution (w/ Magneti-Marelli EFI) 90-99 80” Evolution (carbureted) 86-89 80” Evolution (carbureted) 02-10 V-Rod FOR XL/BUELL 04-10 XL Evolution 88-03 XL Evolution 96-02 Buell (exc. 96 S2/S2T, 00-02 Blast) FOR AFTERMARKET AIR CLEANERS S&S “D” teardrop air filter S&S 6” x 2 3/16” air filter S&S Super E and G series carb air filter Screamin’ Eagle air filter 08-10 FLHTCUSE/FLHRSE Screamin’ Eagle air filter Evolution Big Twin Screamin’ Eagle air filter Twin Cam (except 08-10 Dresser, 08-10 Dyna) Screamin’ Eagle air filter 04-10 XL Arlen Ness billet Sucker air filter Twin Cam (except 08-10 Dresser), Arlen Ness Stage 1 Big Sucker/Billet Sucker air filter for CV carb or Delphi EFI (except 08-10 Dresser)

BRAKES 1011-0528

TANKS & OIL FILTERS

1011-0783

DRAG SPECIALTIES #

K&N REF. #

OEM #

1011-0320 1011-1203 1011-0322 1011-0319 1011-0318 1011-0321 1011-0784

HD1499 HD8899 HD-1395 HD-1390 HD-2086X HD-1102

29461-99 29633-08 29462-99 29291-95 29259-91A, 29330-96 29259-86 29437-01

1011-1067 1011-0317 1011-0312

HD-8834 HD-1388 BU-1297

29331-04 29036-88/A/B, 29331-96 29239-96Y, P0213.9

67.95 65.95 54.95

1011-0313 1011-0314 1011-0315 1011-1204 1011-0316 1011-0528 1011-0783

E-3224 E-3225 E-3226 HD-0600 HD-0800 -

29244-08 29055-89 29442-99A 29044-04

31.95 31.95 31.95 52.95 45.95 47.95 64.95

1011-0528

HD-0800

29442-99A

47.95

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $74.95 69.95 77.95 71.95 59.95 45.95 67.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

371


SECTION

6

WINDSHIELDS TOURING 1011-0533

1011-0532

1011-0332

1011-0328

1011-1061

LUGGAGE 1011-0557

SEATS & SISSY BARS

1011-1289

1011-1725

1011-1278

1011-1409

EXHAUST 1011-1121 1011-1435

FUEL/AIR SYSTEMS HD-1390

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

E3226

HD-1499

ENGINE

HD-1388

HIGH-FLOW REPLACEMENT AIR FILTERS

HD-1395

•Designed to increase horsepower and torque •Accordion design provides increased surface area and optimum filtration •Application-specific sealing bead ensures an airtight fit •Original K&N High-Flow Technology •American-made for over 35 years •For cleaners and air filter care products see HARDWARE, CHEMICALS & TOOLS section •Made in the U.S.A. PART # 1011-0328 1011-0332 1011-0532 1011-0533 1011-0557 1011-1061 1011-1062 1011-1068 1011-1121

SUG. RETAIL $61.95 68.95 70.95 64.95 55.95 62.95 63.95 54.95 51.95

PART # 1011-1278 1011-1289 1011-1409 1011-1410 1011-1435 1011-1725 BU-1297 BU-5000 DS-289057

SUG. RETAIL $59.95 79.95 69.95 69.95 79.95 55.95 57.95 65.95 40.95

CABLES

PART # E-3224 E-3225 E3226 E-3250 E-3325 HD-0600 HD-1388 HD-1390 HD-1395

HD-8899 HD-2086X

SUG. RETAIL $41.95 41.95 43.95 43.95 36.95 53.95 73.95 67.95 75.95

PART # HD-1396 HD-1499 HD-2084 HD-2085X HD-2086X HD-8899 RU-124 RU-1240PK

SUG. RETAIL $69.95 81.95 49.95 48.95 50.95 85.95 50.95 27.95

1011-1345

BRAKES 1011-0472 1011-0471

1011-0658

DS-289498

TANKS & OIL FILTERS

DS-289499 1011-1159

DASHES & GAUGES FRAMES, DS-289509 SUSPENSION DS-289507 & FENDERS DS-289504 DS-289505 DS-289508 FOOTRESTS NU-3428 DS-289506 & LICENSE PLATE FRAMES AIR FILTER ELEMENTS •Top-quality replacement air filter elements from Uni, the OEM supplier to Harley-Davidson TIRES, •Constructed of a unique, open-cell polyurethane material that allows maximum airflow while still providing superior filtration elements are available for a variety of Harley applications TUBES & •Uni •For cleaners and filter care products see HARDWARE, CHEMICALS & TOOLS section WHEELS •Sold individually HARDWARE, •Made in the U.S.A. SUG. RETAIL PART # SUG. RETAIL PART # SUG. RETAIL PART # CHEMICALS PART # 1011-0471 $46.95 DS-289498 $22.95 DS-289507 $18.95 DS-289513 & TOOLS 1011-0472 35.95 DS-289499 26.95 DS-289508 18.95 DS-289514 33.95 DS-289504 17.95 DS-289509 17.95 NU-3428 COVERS, 1011-0658 22.95 DS-289505 18.95 DS-289510 24.95 SECURITY 1011-1159 37.95 DS-289506 18.95 DS-289511 24.95 & GENERAL 1011-1345

372

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $18.95 17.95 30.95


SECTION

6

AIR FILTER APPLICATIONS YEAR MODEL FOR BIG TWIN AND V-ROD 08-10 FLHT/FLHR/FLHX/FLTR 08-10 Dyna Glide 02-10 V-Rod 99-10 Twin Cam (carb), 01-10 Softail EFI, 02-07 Dresser EFI and 04-07 EFI Dyna Glide 99-01 88” Twin Cam Fuel-Injected Dressers 95-98 80” Evolution Fuel-Injected 95-99 80” Evolution International 93-00 80” Evolution (except Fuel Injected) 89-92 80” Evolution 86-89 80” Evolution 84-85 80” Evolution (except FLT, FLHT) 83-85 FLT and FLHT 82-83 FXR 80-82 FLT L78-84 FX, FL and FLH 77-E78 FX and FL (3 1/2” W) L75-76 FX, FL and FLH 67-E75 FX, FL and FLH 41-66 74”, 45” FOR XL 04-10 XL Evolution 88-03 XL Evolution (except 99-03 XL53C) 86-87 XL Evolution 83-85 XL 1000 83-85 XR 1000 (2 req’d) L78-82 XL 1000 L73-E75 XL 1000 (3” W) L75-E78 XL 1000 66-E73 XL 900, 1000 FOR BUELL 03-10 XB9/XB12/XB12S/SCG 04-09/XV12SS/STT 08/XB12R 04-10 00-10 Blast 96-02 S1, S2, S3, M2 (except 94-95 S1, 94-98 S2/S2T, 94-96 S3/S3T) 08-10 1125R/CR FOR AFTERMARKET AIR CLEANERS Edelbrock repl. air filter Edelbrock dual carb air filter Evo reverse tapered: 7” dia. (top) x 61/4” dia. (base) x 23/4” (tall) Evo reverse tapered: 7” dia. (top) x 61/4” dia. (base) x 31/4” (tall) Early Evolution model Screamin’ Eagle air filter (w/ lid); 7” dia. (base) x 7” dia. (top) Late Evolution model Screamin’ Eagle air filter (no lid) Screaming Eagle filter for 08-10 Dyna Screaming Eagle filter for 08-10 FLT, FLHT, FLHR, FLHX, FLTR Twin Cam Screamin’ Eagle tapered air filter (except 08-10 Dresser/Dyna) (no lid); 51/2” dia. (top) x 61/4” dia. (base) Custom Evolution reverse tapered: 7” dia. (top) x 6” dia. (base) x 31/4” (tall) Screamin’ Eagle for 04-09 XL S&S dual-throat carb air filter S&S “D” teardrop air filter; 21/16” S&S Super E and G series carb air filter; 21/2” S&S old style teardrop-shaped housing; 6” x 23/16” air filter 6” custom air filter Dragtron™ air filter Dragtron™ II air filter Drag 7” round air filter (DS-288998) Indian repl. filter 6” OD x 45/8” ID x 23/4” H fits stock S&S teardrop back and Indian teardrop over (Indian cover not included) Mikuni 36-38mm dirt track air filter “D” Oval: 7” length; 10 ° angle; 21/8” flange Mikuni 36-38mm dirt track air filter oval; 7” lenght; 10 ° angle; 1” flange

WINDSHIELDS

K&N #

UNI #

OEM #

1011-1289 1011-1435 1011-0332 HD-1499 HD-8899 HD-1395 HD-1396 HD-1390 HD-1390 HD-2086X HD-2084 -

1011-1345 DS-289499 DS-289511 DS-289507 DS-289506 DS-289508 -

29633-08 29191-08 29437-01 29461-99 29462-99 29291-95 29325-95A 29330-96 29259-89/91A 29259-86 29259-83A 29288-83 29255-78 29255-78 29255-78 29086-75 29086-73 29036-72 29036-41

1011-0532 HD-1388

DS-289510

HD-2085X -

DS-289505 -

29331-04 29036-88A/88B/ 29331-96 29036-86 29036-72 29255-78 29086-73 29086-75 29036-72

1011-0328 BU-5000 BU-1297 1011-1725

1011-0658 NU-3428 -

P0213.0248 P0213.T -

E-3250 E-3325 1011-1061 1011-1062 HD-0600 1011-1409 1011-1410

1011-0471 1011-0472 -

29055-89 -

1011-0557 1011-0533 1011-1068 E-3224 E3226 E-3225 DS-289057 -

DS-289513 DS-289514 DS-289504 DS-289498 DS-289509 1011-1159 DS-289504

29442-99A/B/C/D 29044-04B -

1011-1278 1011-1121 RU-124

-

-

DRYCHARGERS

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

SIZE

SUG. RETAIL

7” dia. (top) x 6” dia. (base) x 31/4” (tall)

$32.95

51/2” dia. (top) x 6 1/4” dia. (base) 51/2” dia. (top) x 6 1/4” dia. (base)

31.95 31.95

33/4” inside width x 7” inside length (tall)

27.95

All part numbers in BOLD MAGENTA are new for 2010.

SEATS & SISSY BARS

LIGHTING

1011-1501

PART # DESCRIPTION DRYCHARGERS 1011-1501 For Custom Evolution reverse tapered air filter, PART #1011-0533 1011-1502 For Twin Cam Screamin’ Eagle tapered air filter (except 08-10 Dresser/Dyna), PART #1011-0557 1011-1502 For 08-10 Touring Screamin’ Eagle air filter, PART # 1011-1410 PRECHARGER RU-1240PK Precharger for Mikuni 36-38mm dirt track air filters, PART #s 1011-1121 and RU-124

LUGGAGE

ELECTRICAL

1011-1502

•Specially designed filter wrap made to extend the service interval of your K&N air filter when used in severe dusty or wet conditions •Made from durable polyester material containing uniform micron openings, the DryCharger® will stop small dirt particles and is water repellant, yet adds little restriction to the airflow of your filter •Feature double-stitched elastic openings to secure drycharger in place •Designed to be run dry and can be cleaned with K&N filter cleaner •Custom fit to each application •Made in the U.S.A.

TOURING

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

373


SECTION

6

WINDSHIELDS TOURING LUGGAGE NOSTALGIA VELOCITY STACKS

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

•High-velocity stacks include backing plate with breathers and screen 1010-0318 •CNC-machined billet aluminum •Available in chrome or black anodized finish •All mounting hardware included •Made in the U.S.A.

1010-0320

PART # DESCRIPTION FOR 93-06 BIG TWIN W/ CV CARB, 01-10 BIG TWIN W/ DELPHI EFI (EXCEPT 08-10 DRESSER) 1010-0319 Chrome 1010-0321 Black anodized FOR 99-06 TWIN CAM MODELS W/ S&S E/G CARB 1010-0318 Chrome 1010-0320 Black anodized

SUG. RETAIL $441.95 369.95 441.95 369.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

DS-288846

DS-288279

CABLES VELOCITY STACK

BRAKES TANKS & OIL FILTERS

•Polished billet aluminum for that hot rod look •Includes screen and all mounting hardware •Made in the U.S.A. PART # DESCRIPTION DS-288846 For Mikuni HSR42 carb, 99-06 Twin Cam DS-288843 For Mikuni HSR42 carb, 92-99 Evolution Big Twin DS-288499 For S&S E and G carburetor, 99-06 88” Twin Cam DS-288279 For S&S E and G carburetor, 93-99 80” Evolution Big Twin

DS-288279 SUG. RETAIL $169.95 169.95 189.95 189.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, VELOCITY TUBES & STACKS •CNC-machined and WHEELS DRAG STACK given a brilliant HARDWARE, •A must-have for performance chrome finish •Fit Patrick Racing CHEMICALS •Precision CNC-machined from 6061 T-6 solid bar dual Mikuni & TOOLS •Overall length is 2”; internal bore is angled at 3° •Features full 180° of front edge rollover for optimal vortex action 42mm carburetors •Made in the U.S.A. COVERS, •Made in the U.S.A. DESCRIPTION SUG. RETAIL PART # SECURITY PART # For S&S Super D carburetor $79.95 1010-0309 & GENERAL 1010-0110

374

DESCRIPTION Velocity stacks

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $399.95


SECTION CHROME VELOCITY STACKS

7807-0005

6

7807-0008

WINDSHIELDS

•Feature a one-piece breather/support bracket •No external breather lines are necessary •Available in short or long style •Includes velocity stack with screen, breather support bracket and hardware •Made in the U.S.A. FOR 93-10 BIG TWIN PART # SHORT 7807-0004 7807-0005 7807-0006 LONG 7807-0007 7807-0008 7807-0009

TOURING LUGGAGE 7807-0006

DESCRIPTION

SUG. RETAIL

SEATS & SISSY BARS

For 40mm CV carb or 01-10 Delphi EFI (except 08-10 FLHT, FLHR, FLTR, FLHX) For S&S E and G carb For Mikuni 42/45/48 carb

$345.95 345.95 377.95

EXHAUST

For 40mm CV carb or 01-10 Delphi EFI (except 08-10 FLHT, FLHR, FLTR, FLHX) For S&S E and G carb For Mikuni 42/45/48 carb

372.95 372.95 404.95

FUEL/AIR SYSTEMS ENGINE

1010-0701

TRANSMISSION & DRIVELINE GASKETS & SEALS

4” V-CLEANER VELOCITY STACKS •CNC-machined billet aluminum •Available in chrome or black anodized with chrome backing plate •Breathers and mounting hardware included •Made in the U.S.A. PART # FOR S&S E AND G CARBS 1010-0701 1010-0702

1010-0703

DESCRIPTION

SUG. RETAIL

Chrome Black

$474.95 474.95

ELECTRICAL

1010-0704 PART # FOR MIKUNI 42/45 CARBS 1010-0703 1010-0704

DESCRIPTION

SUG. RETAIL

Chrome Black

$474.95 474.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

DIRECT BOLT-ON VELOCITY STACKS

2106-1008

4” DEATH STACKS •Chrome billet aluminum velocity stacks •Incorporate crankcase breathers into the mounting brackets •Stacks screw onto mounting brackets for clean installation •Made in the U.S.A. PART # 2106-1008 2106-1009

DESCRIPTION For Mikuni HSR 42/45/48 carbs, 93-99 80” Evolution For S&S E and G carbs, 93-99 80” Evolution

SUG. RETAIL $326.95 326.95

•Chrome-plated billet aluminum •Bolts on from the rear •Includes one mounting screw and internal screen •Made in the U.S.A. PART # 1010-0046 1010-0264

BRAKES 1010-0046

TANKS & OIL FILTERS

1010-0264

DESCRIPTION 4” for S&S E and G carbs 4” for S&S D carbs

SUG. RETAIL $220.95 218.95

DS-288866

VELOCITY STACKS •CNC-machined billet T-6 aluminum with a chrome or black finish •Hidden mounting design for a clean custom look •High-volume airflow for increased horsepower •Come with debris-catching screen and mounting hardware •Available in a variety of applications •Require the use of an air cleaner brace (sold separately) •Patent pending •Made in the U.S.A. PART # CHROME DS-288866 DS-288867 DS-288868 BLACK 1012-0085

DESCRIPTION For S&S E/G carbs, chrome For 40mm CV carbs or Delphi EFI systems, chrome For HSR 42mm carbs, chrome For S&S E/G carbs, black

1012-0085 SUG. RETAIL $173.95 173.95 173.95

PART # BLACK (CONT) 1012-0086 1012-0087 ACCESSORIES DS-288869

DESCRIPTION For 40mm CV carbs or Delphi EFI systems, black For HSR 42mm carbs, black Repl. screen

173.95

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL

$173.95 173.95 2.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

375


SECTION

6

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

PRO-MOD BREATHER •Breather kit includes a breather bracket, which features a hidden internal vent, a mini velocity stack and chrome finish •Includes a screen to keep large particles out of the engine •Made in the U.S.A. PART # 1010-0133

DESCRIPTION For 93-10 Big Twin w/ CV Carb or Delphi fuel injection (except 08-10 Dressers)

SUG. RETAIL $173.95

AMBUSH INTAKE FOR S&S SUPER E AND G CARBURETOR •Fits all S&S E and G carburetors •Cool custom style like you’ve never seen before •Highly polished chrome-plated finish •Requires use of a carburetor support (sold separately) PART # 1010-0109

DESCRIPTION Custom intake for S&S E & G carburetors

SUG. RETAIL $77.95

TRANSMISSION & DRIVELINE GASKETS & SEALS

1023-0010

THUNDERMAX NADS

ELECTRICAL (NITROUS ASSIST DRY SYSTEM) LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

376

•Adds up to 30 horsepower in 30 minutes •Delivered 95% prebuilt and ready to install; no bulky fuel pumps, fuel lines or sandwich plates required •ThunderMax “dry” system works with the ThunderMax ECM (sold separately) to deliver the extra fuel required through the fuel-injection system whenever nitrous is activated; bulkier “wet” systems usually use a second outlet from the gas tank and a pump to supply the required pressure •Once the arming switch is turned on, the ThunderMax ECM activates the nitrous and extra fuel after three parameters are met: bike speed, rpm and throttle open •The NADS kit includes the air cleaner backplate, nitrous solenoid, spray nozzle, arming switch assembly and air filter •Model-specific bracket/bottle kits mount the nitrous bottle to the front frame downtube, requiring only a single line to be run from the nitrous tank to the solenoid on the air cleaner backplate •NADS kit and bracket/bottle kits are sold separately •Compatible with ThunderMax Open or Closed Loop Systems •Maps available online at www.thunder-max.com •Made in the U.S.A.

1023-0012

NOTE: Legal in California only for racing vehicles which may never be used upon a highway. PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. RETAIL FOR 01-06 BIG TWIN MODELS EQUIPPED WITH DELPHI EFI FOR 01-06 BIG TWIN MODELS EQUIPPED WITH DELPHI EFI (CONT) 1023-0010 NADS kit $669.95 1023-0014 12 oz. nitrous bottle only $214.95 1023-0011 FLT bracket and 12 oz. bottle kit 367.95 1020-0324 Data port “Y” harness (required if using NADS w/ ThunderMax Auto-Tune closed loop module) 34.95 1023-0012 FXST bracket and 12 oz. bottle kit 367.95 1023-0013 FXD bracket and 12 oz. bottle kit 367.95

NITROUS CONVERSION KIT •Designed to adapt your existing 2-lb. non-dresser nitrous kit to EVO and Twin Cam dressers (with fiberglass bags) •Includes everything you need to install Edelbrock’s 2-lb. DOT-approved polished nitrous bottle •Allows you to install the bottle inside a saddlebag for a “hidden” installation •Includes all necessary brackets, hoses and fittings for the conversion PART # DESCRIPTION SUG. RETAIL •2-lb. bottle not included 1023-0006 For 84-06 Big Twin dressers $266.95 •Made in the U.S.A.

All part numbers in BOLD MAGENTA are new for 2010.


SECTION

6

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS

DS-289356

DS-289355

EXHAUST 0706-0017/1023-0008

FUEL/AIR SYSTEMS DS-289363

ENGINE TRANSMISSION & DRIVELINE 1023-0015

2211-0030

PERFORMER RPM WET NITROUS SYSTEMS

GASKETS & SEALS

DS-289357 DS-289387

•Nitrous oxide provides serious horsepower at the push of a button •Easiest way to get a huge horsepower increase; adjustable jetting for 20, 25, 30 or 35 horsepower •Complete kits are specifically designed for individual applications •To prevent the chance of detonation and costly engine damage, an electronic module and rpm sensor prevent nitrous activation below 4300 rpm •Activation of nitrous at a low rpm is the cause of most engine failures with other systems; this is eliminated with the Performer system •The Performer system activates the fuel solenoid just before the nitrous solenoid for a more accurate delivery of fuel and nitrous and more reliable use •Stainless steel jets will not erode like brass jets found in other systems •Require the purchase of the correct nitrous plate for your carburetor or throttle body; carbureted applicaton should have a dual-outlet petcock installed; sold separately •2-lb. bottle kits come complete with all brackets and hardware •12 oz. bottle kits require correct mounting brackets; sold separately •Optional Double Bottle kit allows a second 12 oz. bottle to be added to existing 12 oz. nitrous kit; includes bottle, bottle bracket, hose and special tee fitting — requires correct side frame brackets (sold separately) •All bottles feature a highly polished finish •Optional adjustable nitrous control module has two rpm settings; first setting controls the rpm level when the nitrous is activated, and the second controls the rpm level when it is deactivated; tuner can select both minimum and maximum rpm settings •Made in the U.S.A. NOTE: Delphi fuel-injected bikes require the purchase of PART #1023-0015. NOTE: 04-06 models require inductive rpm sensor PART #2211-0030 for installation of Edelbrock Wet Nitrous systems. PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. NITROUS SYSTEMS MOUNTING BRACKETS FOR 12 OZ. BOTTLE ONLY DS-289359 Kit w/ 12 oz. bottle for 00-06 Softail $1,288.95 (2 REQUIRED PER BOTTLE) (CONT) DS-289360 Kit w/ 2 lb. bottle for 00-06 Softail 1,421.95 1023-0003 13/8” frame bracket (ea.) DS-289355 Kit w/ 12 oz. bottle for 84-99 Softail 1,298.95 OPTIONAL/REPLACEMENT COMPONENTS DS-289356 Kit w/ 2 lb. bottle for 84-99 Softail 1,455.95 1023-0004 Adjustable nitrous control module DS-289357 Kit w/ 12 oz. bottle for 99-05 Dyna 1,267.95 DS-289387 “Double Bottle” 12 oz. bottle kit DS-289358 Kit w/ 2 lb. bottle for 99-05 Dyna 1,406.95 DS-289377 Taper face jet .024” (ea.) DS-289353 Kit w/ 12 oz. bottle for 91-98 Dyna 1,232.95 DS-289378 Taper face jet .026” (ea.) DS-289354 Kit w/ 2 lb. bottle for 91-98 Dyna 1,371.95 DS-289379 Taper face jet .028” (ea.) DS-289351 Kit w/ 12 oz. bottle for 84-94 FXR 1,241.95 DS-289380 Taper face jet .030” (ea.) DS-289352 Kit w/ 2 lb. bottle for 84-94 FXR 1,381.95 DS-289381 Taper face jet .034” (ea.) 1023-0002 Kit w/ 2 lb. bottle for 99-06 Twin Cam Dresser 1,481.95 DS-289367 Repl. nitrous solenoid 1023-0005 Kit w/ 12 oz. bottle for 95-03 XL 1,232.95 DS-289368 Repl. fuel solenoid 1023-0007 Kit w/ 2 lb. bottle for 95-03 XL 1,397.95 DS-289369 Nitrous solenoid repair kit DS-289370 Fuel solenoid repair kit NITROUS PLATES DS-289371 2 lb. polished bottle only DS-289361 For OEM Keihin CV, 40/42mm Mikuni, Edelbrock spigot mount carb 121.95 DS-289372 12 oz. polished bottle only DS-289388 12 oz. bottle brackets (ea.) DS-289362 For OEM 44mm Screamin’ Eagle, 45mm Mikuni spigot mount carb 123.95 DS-289382 Glycerin-filled nitrous pressure gauge (0-1400 psi) DS-289363 For S&S E series, Edelbrock flange mount carb 95.95 DS-289383 #4 AN purge/gauge adapter DS-289364 For S&S G series flange mount carb 96.95 DS-289384 Repl. fuel filter 1023-0015 For 01-05 Delphi fuel injection 214.95 DS-289385 Repl. fuel pump MOUNTING BRACKETS FOR 12 OZ. BOTTLE ONLY (2 REQUIRED PER BOTTLE) 0706-0017 10” -3 AN red fuel line DS-289373 11/8” frame bracket (ea.) 48.95 1023-0008 10” -3 AN nitrous line DS-289374 11/4” frame bracket (ea.) 45.95 2211-0030 Inductive rpm sensor DS-289375 11/2” frame bracket (ea.) 45.95

All part numbers in BOLD MAGENTA are new for 2010.

RETAIL

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS

$45.95 261.95 341.95 8.95 8.95 8.95 8.95 8.95 107.95 82.95 41.95 41.95 253.95 201.95 64.95 74.95 22.95 47.95 182.95 24.95 26.95 74.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

377


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.