15 TANKS & OIL FILTERS (Réservoirs et filtres à huile) 2010

866

SECTION

15

WINDSHIELDS 0701-0126 Side profile

TOURING

0701-0126 0701-0527

LUGGAGE SEATS & SISSY BARS EXHAUST GAS TANKS FOR DRESSERS 171/2”,

201/2”

•Now available in 20” or widths •One-piece tanks feature a 3” stretch •Curved bottom for a custom look •Includes a raw dash panel that replaces the existing dash •Factory sealed powder coat primer on the inside of tanks •Accept L96-10 vented gas caps (sold separately); 03-10 style fuel-injected tanks accepts the stock OEM fuel-pump assembly •96-06 style carb tanks include a filler plate/neck assembly •Tanks have an approximate 6-gallon capacity •Tanks fit with RWD Profile (PART #0804-0247), ProTour (PART #0804-0248) and LoPro (PART #0801-0508) seats, sold separately, see page 144 •Made in the U.S.A. NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending unit.

PART # DESCRIPTION SUG. RETAIL FOR 08-10 FLHT/ FLHTC/FLHTCU/FLHX/FLTR MODELS 0701-0526 08-10 style fuel-injected gas tank (20”) $1,269.95 0701-0527 08-10 style fuel-injected gas tank (171/2”) 1,269.95 FOR 96-07 FLHT/FLHX/FLTR MODELS 0701-0126 03-07 style fuel-injected gas tank (201/2”) 1,186.95 0701-0127 96-06 style carb gas tank (201/2”) 1,229.95 0701-0318 03-07 style fuel-injected gas tank (171/2”) 1,186.95

FUEL/AIR SYSTEMS 0701-0190

ENGINE 0701-0127 0701-0127 Side profile

PART # DESCRIPTION FOR 96-07 FLHT/FLHX/FLTR MODELS (CONT) 0701-0319 96-06 style carb gas tank (171/2”) FOR 96-07 FLHR MODELS 0701-0189 03-07 style fuel-injected gas tank (201/2”) 0701-0190 96-06 style carb gas tank (201/2”) 0701-0320 03-07 style fuel-injected gas tank (171/2”) 0701-0321 96-06 style carb gas tank (171/2”)

SUG. RETAIL

TRANSMISSION & DRIVELINE GASKETS & SEALS

$1,229.95 1,229.95 1,229.95 1,229.95 1,229.95

ELECTRICAL LIGHTING

1914-0009

1914-0009

HANDLEBARS, CONTROLS & MIRRORS

0701-0110

CABLES 0701-0110 Side profile

BRAKES

0701-0114 Side profile

TANKS & OIL FILTERS

0701-0114

DASHES & GAUGES SMOOTH-TOP GAS TANKS •Custom tanks for custom builders •One-piece, single-cap design •Smooth top eliminates the dash completely •Handcrafted from 14- and 16-gauge steel •Requires the use of an L96-10 vented gas cap and 22mm petcock •Required mount kits may be used on any custom application •Made in the U.S.A. NOTE: Not for use on fuel-injected models.

PART # DESCRIPTION CUSTOM TANKS FOR 00-06 SOFTAIL 1914-00091 211/4” L x 151/2” W, (approx. 4.5 gal.)

0701-04361 231/2” L x 171/4” W, (approx. 5.5 gal.)

CHOPPER-STYLE TANKS 0701-0110 Short, curved bottom, 233/4” L x 121/2” W UNIVERSAL TANKS 0701-0114 5” tear-drop, std. mount 28” L x 16” W

0704-0001

0704-0002 SUG. RETAIL $799.95 999.95 953.95 868.95

PART # DESCRIPTION SUG. RETAIL UNIVERSAL TANKS (CONT) 0701-0115 5” tear-drop, recessed mount 25” L x 16” W $1,129.95 0701-0117 5” tear-drop narrow, recessed mount 25” L x 14” W 1,129.95 TANK MOUNTS 0704-0001 Frame mount kit 39.95 0704-0002 Recessed mount kit 71.95 1

Requires the relocation of gauges, indicator lights and ignition switch; FXSTD will require the use of a custom seat.

WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.

All part numbers in BOLD MAGENTA are new for 2010.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

867

SECTION

15

WINDSHIELDS TOURING

ONE-PIECE 2.5” EXTENDED GAS TANKS

LUGGAGE

•Powder-coated on the inside to form a complete seal •Uses stock dash •Includes fuel gauge bung and filler bung •Accepts any L96-10 vented aftermarket cap •A new seat or seat nose modification is required •Measures 231/2” L x 171/4” H x 9” H (approximately 5.5 gal.)

•Made in the U.S.A.

SEATS & SISSY BARS

0701-0434

NOTE: Mounting hardware not included.

PART # 0701-0434

EXHAUST

DESCRIPTION For 01-07 Softail models w/ fuel injection

0701-0382

SUG. RETAIL $999.95

PART # 0701-0435

DESCRIPTION For 00-06 Softail models w/ carb

SUG. RETAIL $999.95

0701-0381

1022-0046 “Gas It” fuel injection kit

0502-0256

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE VINTAGE GAS TANKS GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

•Add a period-style bobber tank to your Softail •Steel gas tank inspired by the Softail conversion 0701-0315 Roland Sands Designs created and dubbed El Borracho •Available for carbureted or fuel-injected models •Fuel-injected tank includes a RSD “Gas It” fuel injection kit that install with simple hand tools and no fabrication is required •Tanks rest on a clever steel backbone cover that hides the OEM wiring and holds stock ignition switch to deliver a clean look •Holds three gallons of fuel •Roland Sands Design gas caps sold separately; see page 877 •Matching seat kit, rear fender kit and handlebars also sold separately •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION FOR 01-10 SOFTAIL MODELS W/ FUEL INJECTION FOR 00-06 SOFTAIL W/ CARB (CONT) 0701-0382 Gas tank kit (tank and cover, with “Gas It” kit) $1,761.95 0701-0315 Gas tank only FOR 00-06 SOFTAIL W/ CARB 0502-0256 Backbone cover only 0701-0381 Gas tank kit (tank and cover) 1,199.95

SUG. RETAIL $1,099.95 246.95

CABLES BRAKES

0701-0184

0701-0185

0701-0183

TANKS & GAS TANKS OIL FILTERS CUSTOM •Narrow Mustang type features a single cap, two petcock outlets, straight DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

868

mounting tabs and a hole-to-hole center line on mounting brackets of 171/2” •Extra Wide Mustang type features a high tunnel for the “Fatbob” look, one left side petcock outlet and a hole-to-hole center line on mounting brackets of 1711/16” •1-Piece Fatbob style features a left side external petcock outlet, indent on tank bottom for rocker box clearance and a hole-to-hole center line on mounting brackets of 193/4” •Dished tank style features a bung for cam-style gas cap, a bung for late-model 22mm petcock and a hole-to-hole center line on mounting brackets of 163/4” •Made in the U.S.A.

0701-0523

NOTE: Not for use on fuel-injected models.

NOTE: Paughco recommends all tanks be mounted on leather spacers or bushings.

NOTE: All tanks are pressure-tested and are bare metal; fit before painting.

PART # DESCRIPTION NARROW MUSTANG TYPE (161/2” L X 9” W X 7” D; TUNNEL MEASURES 21/2” W X 21/4” D) 0701-0183 2.2 gal. tank EXTRA WIDE MUSTANG TYPE (161/2” L X 12” W X 7” D; TUNNEL MEASURES 21/2” W X 5” D) 0701-0184 3 gal. tank 1-PIECE FATBOB STYLE (191/2” L X 13” W X 8” D; TUNNEL MEASURES 23/16” W X 41/4” D) 0701-01851 4.75 gal. tank DISHED STYLE (16” L X 10” W X 9” D; TUNNEL MEASURES 3” W X 21/2” D) 0701-0523 3 gal. tank 1

SUG. RETAIL $171.95 171.95 186.95 362.95

Will not work on any stock FXR or FLT.

WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.

All part numbers in BOLD MAGENTA are new for 2010.

SECTION

15

WINDSHIELDS TOURING LUGGAGE

1914-1863 1914-1813

0701-0167

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

0701-0167 Side profile

ONE-PIECE TANKS

1914-1863

•5.1-gallon tank is made from 16-gauge stamped steel Side profile •Available in standard or 2” extended length •Dash-style tank has mounting provisions for stock-style dash and ignition switch (not included) •Tank with fuel gauge bungs accepts OEM-style or aftermarket fuel gauges •Aero tank includes gas caps; screw-in cap tank requires the use of 82-E96 gas caps (sold separately)

ENGINE

1914-1813 Side profile

NOTE: Seat nose may require modification to fit properly with extended tanks. Some models may require sending unit modification.

PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. RETAIL FOR 01-06 FXST, FLST W/ FUEL INJECTION AND 04-06 FXST, FOR 00-03 FXST, FLST W/ CARB (EXCEPT FXSTD) FLST W/ CARB (EXCEPT FXSTD) 1914-1813 Dash stye w/ fuel gauge bung, screw-in cap $369.95 Dash style w/ fuel gauge bung, single 1914-18611 1914-1814 2” extended dash style w/ fuel gauge bung, screw-in cap $389.95 single screw-in cap 419.95 2” extended w/ one screw bung and 0701-01671, 2 1 Requires the use of petcock adapter OEM# 62842-00 or dummy bung for OEM gas gauge 359.95 Drag P/N 0705-0024 when used in listed carb applications.

2” extended dash style, dual screw-in caps 424.95 2 Will not fit EFI models.

1914-18631 1914-18641 2” extended dash stye with fuel gauge bung, single screw-in cap 429.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

MUSTANG GAS TANKS •Fat Bob-style, low-tunnel tank holds approximately 3.3 gallons •Features a 3/8” NPT-style petcock mount with two 1/4” NPT crossover fittings •Available as a single- or dual-cap design •Measures 193/4” L (including mounting tabs) x 111/2” W x 71/2” H (approximately) NOTE: Not for use on fuel-injected models.

PART # DESCRIPTION 0701-0001 W/ single cap 0701-0010 W/ dual cap

CABLES

SUG. RETAIL $99.95 107.95

0701-0001

BRAKES

0701-0010

DS-390071 Side profile

DS-390392

TANKS & OIL FILTERS DASHES & GAUGES

DS-390071

ONE-PIECE EXTENDED GAS TANKS •Smooth-top tanks eliminate the dash completely and will require custom mounting of ignition switch, dash lights and speedometer •Tank measures 221/2” L by 16” W •Aero caps are included with tank; screw-in caps are not included and must be purchased separately (use 82-E96 style caps) •Includes all necessary hardware NOTE: 96-99 models require the use of pre-96 petcock.

PART # DESCRIPTION SMOOTH-TOP STYLE TANKS FOR 84-99 FXST, FLST DS-390071 With single screw-in cap

SUG. RETAIL $354.95

PART # DESCRIPTION SMOOTH-TOP STYLE TANKS FOR 84-99 FXST, FLST DS-390392 With single Aero cap

SUG. RETAIL $449.95

WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.

All part numbers in BOLD MAGENTA are new for 2010.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

869

SECTION

15

WINDSHIELDS TOURING

2107-1737

2107-1737 Side profile

LUGGAGE SEATS & SISSY BARS

DS-391335

ONE-PIECE 2” EXTENDED GAS TANKS

EXHAUST FUEL/AIR SYSTEMS ENGINE

•Gas tanks are fully functional; no dummy extensions •2” stretch over stock length; capacity is approximately 4.2 gallons •Available in a smooth-top style for use with standard screw-in caps or with locking aero cap •Aero cap included; screw-in gas caps sold separately (use 84-E96 style) PART # •Smooth top tanks require custom gauge mounting FOR 84-94, 99-00 FXR •Accept late-style petcock (22mm) 2107-1737 •Come complete with all necessary mounting hardware DS-391335 NOTE: Seat nose may require modification.

DESCRIPTION Single locking Aero cap Dual screw-in caps

DS-391291 Side profile

DS-390391 Side profile

DS-391331 Side profile

DS-391291

DS-390391

DS-391331

SUG. RETAIL $439.95 357.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS TWO-PIECE FLAT-SIDE GAS TANKS & MIRRORS EXTENDED •2” extended tanks are fully functional; no dummy extensions welded to rear of tank CABLES BRAKES

•4” extensions comprised of fully functional 2” extended tanks with additional 2” dummy extensions welded to the rear of the gas tanks •Tanks come in a raw finish and accept stock-style speedometer and dash •Contoured to fit around the nose of most seats (some seats may require modification) •Available in 5.2-gallon style for use with standard screw-in caps •Aero caps are included with tank •Screw-in caps are sold separately (use 84-E96 style) •Sold as a set NOTE: 96-99 models require pre-95 screw-in gas caps and petcock.

TANKS & OIL FILTERS DASHES & GAUGES

NOTE: See SEATS & SISSY BARS section for custom seats and seat pans to fit PART # DESCRIPTION SUG. RETAIL 2” EXTENDED TANKS FOR 84-99 FXST, FLST, 85-86 FXWG AND FXSB DS-391291 5.2-gal. tank for use w/ dual screw-in caps $349.95 DS-390391 5.2-gal. tank w/ Aero locking caps 499.95

DS-391237 Side profile

with extended tanks.

PART # DESCRIPTION SUG. RETAIL 4” EXTENDED TANK FOR 84-99 FXST, FLST, 85-86 FXWG AND FXSB DS-391331 5.2-gal. tank for use w/ dual screw-in caps $419.95

DS-391238 Side profile

DS-391238

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES FAT BOB-STYLE GAS TANKS •Distinctive reproduction gas tanks constructed of drawn steel TIRES, •Manufactured to exact OEM specifications TUBES & NOTE: Stock dash may need to be shimmed.

WHEELS NOTE: 96-99 models require the use of pre-95 gas caps and petcock.

DESCRIPTION SUG. RETAIL HARDWARE, PART # FOR USE WITH 84-E96 SCREW-IN GAS CAPS (SOLD SEPARATELY) FOR 84-99 FXST, FLST, 85-86 FX/FXWG CHEMICALS TANKS DS-391237 3.5-gal. Flatside tank; repl. OEM #s 61218-85 (right side) and 61426-85 (left side) $229.95 & TOOLS DS-391238 5-gal. Flatside tank; repl. OEM #s 61211-84A (right side) and 61228-84 (left side) 229.95 6-gal. Flatside tank 299.95 COVERS, DS-391234 SECURITY WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE & GENERAL being painted to eliminate potential problems.

870

All part numbers in BOLD MAGENTA are new for 2010.

SECTION

15

WINDSHIELDS TOURING

0701-0187

LUGGAGE

0701-0186

FATBOB GAS TANKS •4.2 gallon tank bolts to stock frame •Comes with mounting kit and hose line fittings •PART #0701-0186 features a left side rear external outlet for stock petcock; PART #0701-0187 features a left side center external outlet for stock petcock •Measures 191/4” L x 141/2” W x 8” D; hole-to-hole center line on mounting brackets measures 145/8” •Made in the U.S.A. NOTE: Paughco recommends all tanks be mounted on leather spacers or bushings.

NOTE: All tanks are pressure-tested and are bare metal; fit before painting.

DS-391322

SEATS & SISSY BARS PART # 0701-0187 0701-0186

DESCRIPTION For 95-03 XL models For 86-94 XL models

SUG. RETAIL $412.95 412.95

EXHAUST FUEL/AIR SYSTEMS

DS-391322 Side profile

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL EXTENDED DASH-STYLE RUBBER-MOUNT QUICKBOB® TANK KITS •Fully functional extended design, 2” longer than a standard Quickbob tank •Allows the lines of the tank to flow into the lines of the seat for a great custom look •Tanks have cutout in rear for seat nose (some seats may need to be modified) •95-03 tank kit includes a three-light dash for use with the OEM electronic speedo (except customs), 6-post Fat Bob ignition switch, ignition switch relocation bracket, coil bracket and a screw-in gas cap •86-94 tank kit includes a three-light dash, dash base, 2:1 ratio speedo with trip reset (68-84 style face), rubber dampener, a 6-post Fat Bob ignition switch and a screw-in gas cap •All tanks come with necessary mounting brackets •3.9-gallon fuel capacity •Utilizes a 22mm petcock NOTE: When this gas tank is installed on 92 or later models and the OEM PART # continuous venting system is eliminated or disconnected, you may not reuse your stock vented cap, but may replace it with an earlier version of DS-391348 DS-391322 the screw-type caps.

DESCRIPTION For 95-03 XL models (exc. 1200S model) For 86-94 XL models

DS-391352

SUG. RETAIL $536.95 579.95

DS-390077

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

DS-391351

EXTENDED SMOOTH-TOP QUICKBOB® RUBBER-MOUNT GAS TANKS •Extended design of these tanks allows the lines of the tank to flow into the lines of the seat for a great custom look •2” longer than a standard QuickBob tank •Available in a single- or dual-gas cap style •Tanks have cutout in rear for seat nose (some seats may need to be shortened) •86-03 tanks feature screw-in bungs (use 82-E96 style caps) •3.9-gallon capacity PART # DESCRIPTION SUG. RETAIL •Utilize a 22mm petcock FOR 86-03 XL MODELS (REQUIRES PART #DS-390077 •Each tank comes with necessary mounting brackets IGNITION COIL RELOCATION KIT; SOLD SEPARATELY) NOTE: When gas tanks are installed on 92 and later models and the OEM continuous venting DS-391351 Twin-cap style gas tank $381.95 system is eliminated or disconnected, you may not reuse your stock vented cap, but may DS-391352 Single-cap style gas tank 381.95 replace it with an earlier version of the screw-type caps.

DS-390077 Ignition relocation kit 21.95 NOTE: Will not fit 1200S models.

WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.

All part numbers in BOLD MAGENTA are new for 2010.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

871

SECTION

15

WINDSHIELDS EXTENDED SMOOTH-TOP GAS TANK •Higher-capacity (approximately 4-gallon) 2” extended tanks •Mounts to stock location; requires use of a custom seat to match rear tank cut-out •Accepts a 22mm petcock and late-style screw-in cap (sold separately) PART # DESCRIPTION NOTE: Will require a custom seat; stock seat will not fit.

0701-0098 For 04-06 XL

TOURING

SUG. RETAIL $335.95

LUGGAGE DS-390396

DS-391272

DS-391272 Side profile

DS-391273

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

DS-391284

RUBBER-MOUNT QUICKBOB® GAS TANKS •One-piece 3.6-gallon replicas of the Harley Fat Bob tanks •Available with a complete dash assembly or in a smooth-top design •Each style tank comes with rubber mount brackets and hardware •Speedometer not included, but any of the FL-style speedos (except DS-243870) may be used with DS-391273 tank on 86-94 models only DS-391285 •When ordering speedo, be sure to match existing speedo ratio with the one you’re ordering •PART #DS-391284 mount kit with dash allows the use of the OEM PART # DESCRIPTION SUG. RETAIL electronic speedometer on 95-03 models (except customs); FOR 86-03 XL MODELS also includes coil and ignition switch relocation brackets DS-390396 Smooth-top w/ Aero cap $429.95 (PART #DS-391273 tank only) DS-391272 Smooth-top for use w/ screw-in caps 341.95 NOTE: When this gas tank is installed on 92 and later models and the DS-391273 Dash style for use w/ screw-in caps (requires OEM continuous venting system is eliminated or disconnected, PART #DS-391284 for mounting on 95-03 models) 399.95 you may not reuse your stock vented cap, but may replace it with DS-391284 Dash kit for 95-03 OEM electric speedo 81.95 an 84-E96 version of the screw-type caps.

DS-391285 Repl. rubber mounting kit for 86-03 42.95 NOTE: Will not fit 1200S models.

DS-390340 Side profile

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

872

GAS TANKS WITH CHROME AERO-STYLE GAS CAP

DS-390340

•Rubber-mounted bolt-on style flat-bottom tank is made from heavy-gauge steel •Reinforced seams and extra-strong mounting tabs •”High-tunnel” design adds fuel capacity without looking tall; 3.3-gallon capacity •Features a chrome aero-style locking gas cap with keys PART # •Accepts a 22mm petcock (right side), sold separately DS-390340 NOTE: May require seat nose modification and 0701-0437 relocation of ignition switch on some models.

GAS TANKS •Bolt-on gas tanks for XL models are made of heavy-gauge steel with reinforced seams •Come complete with extra-strong mounting tabs •2.9-gallon tanks are 2” wider than stock tanks •3.3-gallon tanks have “high-tunnel” design so they add fuel capacity without looking “tall” •3.3-gallon tanks may require seat nose modifications •PART #DS-391220 uses a 3/8” NPT petcock, all others use 22mm; petcocks sold separately later in this section

0701-0437

DESCRIPTION For 86-94 XL For 95-03 XL

SUG. RETAIL $236.95 234.90

DS-391223 Side profile

NOTE: When this gas tank is installed on 92 and later models and the Original Equipment continuous venting system is eliminated or disconnected, you may not reuse your stock vented cap, but may PART # DESCRIPTION replace it with an earlier version of the DS-391226 2.9-gallon rubber mount tank for 95-03 XL screw-type caps.

DS-391225 2.25-gallon rubber mount tank for 95-03 XL NOTE: 86-94 tanks have petcocks DS-391224 2.25-gallon rubber mount tank for 86-94 XL on the right side, 95-03 tanks have DS-391223 2.9-gallon rubber mount tank for 86-94 XL petcock on left side.

SUG. RETAIL $169.95 149.95 149.95 169.95

DS-391224

WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.

All part numbers in BOLD MAGENTA are new for 2010.

SECTION

15

DS-391253

WINDSHIELDS

WELD-ON GAS TANK EXTENSIONS •Economical way to get the look of stretched gas tanks •Curved to match the tank’s natural curves •Do not increase gas tank capacity •Extension for 84-99 flat-side tanks requires a shortened seat nose •For custom dashes that fit these extensions, see DASHES & GAUGES section •Made in the U.S.A.

TOURING

NOTE: Installation is recommended by experienced professionals only.

If tanks have a sealer in them, installation will cause the sealer to peel from tank. Remember to pressure-check tanks before resealing and painting.

PART # DS-391253 DS-391254 0701-0095 0701-0096 0701-0097

DESCRIPTION 3” for 31/2-gallon 84-99 flat-side tanks 3” for 5-gallon 84-99 flat-side tanks 6” for all 5-gallon flat side tanks 6” for 00-07 Softail (except Deuce) 6” for 93-07 FL

0701-0095

SUG. RETAIL $163.95 163.95 183.95 183.95 183.95

LUGGAGE SEATS & SISSY BARS

0701-0096

0701-0097

EXHAUST FUEL/AIR SYSTEMS ENGINE

UNIVERSAL TANK MOUNT KIT UNIVERSAL GAS TANK BASE •For use with Lowlife and Hardlife frames •Made from 16-gauge steel •Allows fabricators to start with a radius base and tunnel to fit Lowlife or Hardlife chassis or any other chassis with radius backbone •Includes four flush mounts, petcock and fuel crossovers TIG welded into place •Use in conjunction with Universal PART # DESCRIPTION Tank Mount PART #0704-0004 0704-0003 Universal tank base •Made in the U.S.A.

•For use with Lowlife and Hardlife frames •Extra-thick cross members feature rubber isolated tank mounts to absorb vibration •Minor fitment, fabrication and welding required •Made in the U.S.A. SUG. RETAIL $539.95

PART # 0704-0004

DESCRIPTION Universal tank mount kit

SUG. RETAIL $129.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

CUSTOM MOUNTING KIT FOR FLATSIDE TANKS

CUSTOM BOLT KIT FOR FLAT SIDE TANKS

•Kit includes mount brackets, rubber mounts, hose protector, chrome-plated beveled washers and mounting screws •Can be used to update the stock mounting hardware or for new constructions

•Chrome-plated hardware replaces front OEM gas tank mounting bolts •Includes four 5/16-18 x 3/4” flathead Allen bolts with recessed washers PART # DS-391357

DESCRIPTION For all 91-99 Softail models

CABLES

SUG. RETAIL $14.95

PART # DS-391301

DESCRIPTION For 84 FXST, FLST and all 85-99 models w/ split tanks

SUG. RETAIL $52.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1913-3015

1913-3007 1913-3016

GAS TANK MOUNTING HARDWARE KITS •Custom chrome-plated mounting kits •Available in acorn nut or flat head Allen styles •Made in the U.S.A.

1913-3014

PART # DESCRIPTION ACORN NUT-STYLE W/ STUD 1913-3015 For 00-10 FXST/FLST models 1913-3016 For 84-99 FXST/FLST models 1913-3014 For 91-03 Dyna models 2401-0119 For 04-10 XL models

SUG. RETAIL $11.95 11.95 22.95 22.95

2401-0119

1913-3006

PART # DESCRIPTION ACORN NUT-STYLE W/ STUD (CONT) 1913-3007 For 96-03 XL models FLAT HEAD ALLEN-STYLE W/ COUNTERSUNK WASHERS 1913-3006 For 98-10 FLT models 1913-3013 For 91-99 FXST/FLST models

All part numbers in BOLD MAGENTA are new for 2010.

1913-3013 SUG. RETAIL $35.95 12.95 12.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

873

SECTION

15 IGNITION RELOCATION KIT

WINDSHIELDS TOURING LUGGAGE

CUSTOM ONE-PIECE GAS TANK MOUNTING KIT •Kit includes front and rear tank mounts, rubber grommets and hardware PART # DS-391648

SEATS & SISSY BARS

DESCRIPTION For most aftermarket FXST, FLST one-piece tanks on 84-99 models

SUG. RETAIL $42.95

•Use when an alternative fuel source is needed, like when installing a nitrous oxide “wet” kit on fuel-injected motorcycles or as a fitting for an oil tank •Requires a 9/16” hole for mounting; will work with any tank up to 5/8” wall thickness •1/8” NPT internal thread size •CNC-machined from billet aluminum; includes a high-quality Viton O-ring for a positive seal, a stainless steel nut and washer and an 80 micron filter •Made in the U.S.A.

FUEL/AIR SYSTEMS ENGINE

PART # 0705-0043

DESCRIPTION Weldless tank bung

SUG. RETAIL $41.95

TRANSMISSION & DRIVELINE GASKETS & SEALS FUEL TANK TAB TRIM

ELECTRICAL LIGHTING

•Add some sizzle to your Sportster’s fuel tank •Show-chromed mounting tabs feature chromed fasteners that securely hold the tank in place and look great doing it •Sold in pairs PART # 0521-0228

DESCRIPTION For 96-03 XL w/ stock fuel tank

SUG. RETAIL $42.95

HANDLEBARS, CONTROLS & MIRRORS

TANKS & OIL FILTERS DASHES & GAUGES

SUG. RETAIL $21.95

0705-0040 0705-0035

0705-0039

0705-0034

PETCOCK BUNGS •Weld-on tank bungs are available in 22mm male (stock on Harley-Davidson carbureted fuel tanks after 1975) or 3/8” NPT female (stock on pre-1975 Harley-Davidson fuel tanks) •Designed to be welded directly to the fuel tank •Great for custom tanks or repairing stock tanks •Sold each •Made in the U.S.A. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION 3/8” NPT 22MM 0705-0039 Steel $10.95 0705-0034 Steel 0705-0040 Aluminum 12.95 0705-0035 Aluminum

SUG. RETAIL $10.95 12.95

REPLACEMENT GAS TANK BUNGS

FUEL TANK MOUNTING GROMMETS •Rubber mounting grommets from Genuine James Gaskets •Sold in 12 packs •Made in the U.S.A. PART # DS-391241

DESCRIPTION For 84-99 Softail, 85-86 FX/FXWG w/ OEM gas tanks and most aftermarket Fat Bob gas tanks; repl. OEM #11447

SUG. RETAIL

0704-0007 $1.95 (ea.)

GAS TANK GROMMETS

FRAMES, •Rubber grommet with SUSPENSION metal sleeve & FENDERS •Sold each to consumer; sold to dealer in packs of 10 DESCRIPTION FOOTRESTS PART # & LICENSE DS-391240 For 85-86 FX, FXWG and 84-99 Softail OEM gas tanks and most aftermarket Fat Bob-style PLATE FRAMES gas tanks; repl. OEM #11447 (grommet) and 5775 (sleeve) TIRES, TUBES & WHEELS FUEL TANK MOUNTING HARDWARE, GROMMET KIT CHEMICALS •Kit includes six rubber grommets and two steel sleeves & TOOLS •One kit required for a set of tanks COVERS, •Made in the U.S.A. DESCRIPTION SECURITY PART # For 84-99 FXST/FLST, 85-86 FX/FXWG & GENERAL 1913-3005

874

DESCRIPTION For 95-03 XL models; repl.

OEM #s 31723-71A and 31727-85

•Weld-in style bungs used for custom-mounting filler DS-280459 DS-280458 hole in fuel tanks •Accepts 84-E96 screw-in gas caps PART # DESCRIPTION SUG. RETAIL •Available in vented or DS-280458 Vented $7.95 non-vented styles DS-280459 Non-vented 7.95 •Sold each

CABLES BRAKES

NOTE: Coil bracket will not work on 98-03 1200 Sport models.

PART # DS-390077

WELDLESS TANK BUNG

EXHAUST

•Makes installing a large tank a much simpler task •Moves ignition switch from the right front of fuel tank to the left rear cylinder head •Allows you to retain the original ignition switch cover •Also included is a new chrome-plated ignition coil mounting bracket and hardware

0704-0006

PREMIUM FUEL TANK MOUNTING BUSHINGS

SUG. RETAIL

$1.95 (ea.)

SUG. RETAIL $9.95

0704-0008 •Gooden-Tight tank bushings •Injection-molded high-grade polyurethane with two-piece air-pocketed design •Chemical-resistant, weather-proof, won’t crack, breakdown or damage sheet metal or paint •Can be used to mount virtually anything that would normally be rubber mounted •Two-piece busing design make for easy installation •Aluminum bushing i.d. is 5/16” •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 84-99 FXST, FLST, 85-86 FX, FXWG 0704-0006 Polyurethane bushings only (10-pk.) $34.95 0704-0007 CNC-machined aluminum bushing inserts (6-pk.)

42.95 0704-0008 Aluminum bushing inserts and polyurethane bushing combo (10-pk.)

79.95

All part numbers in BOLD MAGENTA are new for 2010.

SECTION

15

WINDSHIELDS

0703-0054

TOURING 0703-0058

LUGGAGE

POP-UP GAS CAPS •Fit is nearly flush when closed; opens easily with just a quarter-turn of the center of cap •Billet aluminum construction that is polished and chrome-plated •Vented and non-vented styles available to fit early and late-model screw-in style tanks PART # FOR L96-10 MODELS (EXCEPT 0703-0291 0703-0061 FOR 84-E96 MODELS 0703-0058 0703-0059

DESCRIPTION 04-10 XL) Vented Non-vented

SUG. RETAIL $39.95 39.95

Vented Non-vented

39.95 39.95

MALTESE CROSS GAS CAPS

SEATS & SISSY BARS

•Billet aluminum construction, then polished and chrome plated •Vented and non-vented styles available •Fit early and late-model screw-in style tanks PART # FOR L96-10 MODELS 0703-0056 0703-0057 FOR 84-E96 MODELS 0703-0054 0703-0055

DESCRIPTION

SUG. RETAIL

EXHAUST Vented Non-vented

$37.95 37.95

Vented Non-vented

37.95 37.95

GAS CAPS WITH PAINT PROTECTORS

FUEL/AIR SYSTEMS ENGINE

•Chromed low-profile gas caps feature screw-in paint protectors and ratchet-action cap •Available in vented, non-vented and dummy styles 0703-0199 •Vented cap has right-hand threads and can be used in either the right side of double-capped tanks or in single-cap tanks •Non-vented cap has left-hand threads and is used only in the left side of double-capped tanks •The dummy cap replaces the OEM fuel gauge in tanks that feature the fuel gauge in the left side; does not feature a fuel gauge •Sold each; comes complete with installation tool for paint protector PART # DESCRIPTION FOR L96-10 H-D MODELS 0703-0199 Vented, RH thread 0703-0200 Non-vented, LH thread

SUG. RETAIL $59.95 49.95

TRANSMISSION & DRIVELINE 0703-0200

ELECTRICAL 0703-0201

PART # DESCRIPTION FOR L96-10 H-D MODELS (CONT) 0703-0201 Dummy style, repl. fuel gauge

SUG. RETAIL

$29.95

0703-0305

0703-0293

GASKETS & SEALS

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

0703-0304 0703-0199

POP-UP GAS FILLER AND FUEL LEVEL CAPS •Replace your stock cap and gas gauge with these sleek additions •Left side cap features a low-fuel LED warning light built in, push-in installation and wiring harness included •User-programmable to light the LED at any pre-set fuel level •Fits all bikes with a left side analog gas gauge •Matching right side filler cap is vented and sized to match the left side cap (sold separately) •Caps fit nearly flush, and the filler cap opens easily with a quarter-turn of the cap center •Chrome finish •Fuel level cap made in U.S.A. PART # DESCRIPTION FOR 96-10 MODELS 0703-0304 Fuel level cap w/ LED warning light 0703-0293 Vented pop-up gas cap

SUG. RETAIL $109.95 44.95

LOW PROFILE GAS FILLER AND FUEL LEVEL CAPS •Replace your stock cap and gas gauge with these sleek caps •Left side cap features a low-fuel LED warning light built in, push-in installation and wiring harness included •User-programmable to light the LED at any pre-set fuel level •Fits all bikes with a left side analog gas gauge •Matching right side filler cap is vented and includes a screw in paint protector ring and ratchet action cap (sold separately) •Chrome finish •Fuel level cap made in U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 96-10 MODELS 0703-0305 Fuel level cap w/ LED warning light $109.95 0703-0199 Filler cap with protector ring and ratchet cap 59.95

All part numbers in BOLD MAGENTA are new for 2010.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

875

SECTION

15

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

DS-390135

0703-0228

0703-0229

SCREW-IN LOCKING GAS CAPS •Chrome locking cap discourages fuel theft and tampering •Lock has a swing-away cover to keep dirt and debris out of the locking mechanism •Come with two keys •Sold each SUG. PART # DESCRIPTION RETAIL PART # FOR L96-10 MODELS FOR 84-E96 0703-0230 Vented $19.95 0703-0228 0703-0231 Non-vented 19.95 0703-0229

CHROME SCREW-IN GAS CAPS •Feature a provision for evaporative emissions control equipment •Available with or without a vent for 82-05 models; sold individually

DESCRIPTION MODELS Vented Non-vented

SUG. RETAIL $19.95 19.95

PART # DESCRIPTION FOR L96-10 MODELS DS-390281 W/ vent; repl. OEM #61272-92A DS-390282 W/o vent; repl. OEM #61103-83B FOR 84-E96 MODELS DS-390135 W/ vent; repl. OEM #61102-83A DS-390136 W/o vent; repl. OEM #61103-83B

SUG. RETAIL $13.95 13.95 13.95 13.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

DS-390148

DS-390134

DELUXE GAS CAPS •One-piece, die-cast gas caps are completely chrome-finished and feature Nytrel/ cork seals DS-390118 •Vented version has a check ball valve to prevent leakage •Both caps fit any tank using pre-82, early-type twist-on gas caps (will not fit screw-in type tanks) PART # DS-390118 DS-390119

DESCRIPTION Deluxe cap w/ vent Deluxe cap w/o vent

SUG. RETAIL $12.95 12.95

“LIVE TO RIDE” GAS CAPS •Complete thread-in gas caps feature the Live To Ride insignia •3” diameter available in chrome or chrome with a gold insignia •Sold individually PART # DESCRIPTION FOR ALL 84-E96 MODELS DS-390134 Chrome vented cap DS-390137 Chrome nonvented cap DS-390147 Chrome w/ gold insignia vented cap DS-390148 Chrome w/ gold insignia nonvented cap

SUG. RETAIL $18.95 18.95 27.95 27.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, Baby moon SUSPENSION & FENDERS Peaked FOOTRESTS & LICENSE ® “LOW GRAVITY” SCREW-IN GAS CAPS PLATE FRAMES NESS-TECH Flame •Chrome billet caps are so thin you can barely tell they’re on the tanks •Feature a narrow knurled edge with ratcheting action cap so removal is easy TIRES, in various styles TUBES & •Available •Sold individually WHEELS PART # DESCRIPTION SUG. RETAIL PART # FOR 84-E96 MODELS HARDWARE, FOR L96-10 MODELS Peaked vented $46.95 DS-390150 CHEMICALS DS-390198 DS-390223 Peaked non-vented 46.95 DS-390152 & TOOLS DS-390224 Baby Moon vented 46.95 DS-390153 Baby Moon non-vented 46.95 DS-390158 COVERS, DS-390229 Flamed vented 46.95 DS-390159 SECURITY DS-390238 Flamed non-vented 46.95 0703-0223 & GENERAL DS-390273

876

All part numbers in BOLD MAGENTA are new for 2010.

Scalloped

DESCRIPTION Peaked vented Baby Moon vented Baby Moon non-vented Flamed vented Flamed non-vented Scalloped vented

SUG. RETAIL $46.95 46.95 46.95 46.95 46.95 44.95

SECTION

WINDSHIELDS

BILLET ALUMINUM GAS CAPS

TOURING

•Screw-in vented caps sport the Roland Sands Design logo •Available in black anodized Contrast Cut™ or chrome finish that matches the Roland Sands Design Vintage gas tank kit, seat, seat kit, fender kit and handlebars •Made in the U.S.A. PART # DESCRIPTION FOR L96-10 H-D MODELS 0703-0162 Black anodized Contrast Cut™ 0703-0163 Chrome

LUGGAGE

SUG. RETAIL $89.95 89.95

0703-0162

SEATS & SISSY BARS

0703-0163

EXHAUST

“DUMMY” GAS CAP •For bikes with the fuel gauge on the left side •Designed to match the Ness-Tech® “Low Gravity” Baby Moon-style gas caps •Quality construction, chrome finish •Made in the U.S.A. PART # DS-390102

15

DESCRIPTION Baby Moon

FUEL/AIR SYSTEMS SUG. RETAIL $44.95

ENGINE

GAS CAPS •Chrome, black, brass or raw vented caps •Available with weld-in bungs for custom applications or with OEM bung inserts for stock tanks •Made in the U.S.A. PART # DESCRIPTION WITH STEEL WELD-IN BUNG 0703-0066 Classic, chrome 0703-0251 Classic, black 0703-0067 Hot Rod, chrome 0703-0203 Hot Rod, brass 0703-0252 Hot Rod, black 0703-0164 Flip-top, chrome WITH L96-10 OEM BUNG INSERT 0703-0110 Classic, chrome 0703-0253 Classic, black 0703-0254 Hot Rod, black 0703-0165 OEM flip-top, chrome

TRANSMISSION & DRIVELINE

0703-0254 SUG. RETAIL $194.95 194.95 194.95 229.95 194.95 223.95

0703-0203

GASKETS & SEALS

0703-0066 0703-0067 Shown painted

ELECTRICAL LIGHTING

177.95 194.95 194.95 238.95

0703-0164

HANDLEBARS, CONTROLS & MIRRORS

Knurled series

Bottle opener series

CABLES Bandit Renegade Bandit

Renegade

BRAKES

Renegade Bandit

STAINLESS STEEL THIN GAS CAPS

PAINT PROTECTOR WITH BUILT-IN STAINLESS GAS CAP •Fits all screw-in gas tanks •Protects expensive paint jobs from fuel nozzle chips and gas vapors; upgrades the look with a custom gas cap •Easy installation – Paint Protector simply screws into gas tank and is locked down with the church key provided, then gas cap screws into the Paint Protector, completely covering it •Two styles to choose from: Bandit with peaked design and Renegade with smooth-domed design •Paint Protector sleeve is machined from 6061 T-6 aircraft-quality billet aluminum; gas caps are machined from solid billet 303 stainless steel; all parts are polished •Sold in pairs (one vented, one non-vented) or individually (one vented) •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR L96-10 MODELS DS-390081 Bandit gas cap (ea.) $50.95 DS-390080 Bandit gas caps (pr.)

100.95 DS-390083 Renegade gas cap (ea.)

50.95 DS-390082 Renegade gas caps (pr.)

100.95 FOR 84-E96 MODELS LMGC1041A Bandit gas cap (ea.)

50.95 LMGC1041 Bandit gas caps (pr.)

100.95 LMGC1042A Renegade gas cap (ea.)

50.95 LMGC1042 Renegade gas caps (pr.)

100.95

•CNC-machined from 303 stainless steel •Hand polished to a brilliant shine •Available in two styles •Sold in pairs (one vented, one non-vented) or individually (one vented) •Bottle opener series comes with a Landmark gas cap key •Made in the U.S.A. BOTTLE OPENER SERIES •Less than 3mm above the tank PART # FOR 84-E96 MODELS DS-390180 DS-390181 DS-390182 DS-390190

DESCRIPTION Renegade (pr.)

Renegade (ea.)

Bandit (pr.)

Repl. gas cap key

SUG. RETAIL $83.95 44.95 83.95 4.95

KNURLED SERIES •Less than 4mm above the tank PART # FOR L96-10 MODELS DS-390020 DS-390022 FOR 84-E96 MODELS DS-390170 DS-390171 DS-390172

All part numbers in BOLD MAGENTA are new for 2010.

DESCRIPTION

SUG. RETAIL

Renegade (pr.)

Bandit (pr.)

$83.95 83.95

Renegade (pr.)

Renegade (ea.)

Bandit (pr.)

83.95 44.95 83.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

877

SECTION

15 BILLET GAS CAPS

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS

•Constructed from a solid piece of 6061 billet aluminum •Chrome-plated to show standards •Replace stock vented and non-vented caps •Crusader Maltese Cross cap has matching points cover, derby cover and inspection cover also available •Sold each •Made in the U.S.A. SUG. PART # DESCRIPTION FOR L96-10 STYLE TANKS 2107-1500 Warrior vented, chrome 0703-0063 Maltese vented, chrome 0703-0064 Maltese non-vented, chrome 0703-0220 Maltese vented, black 0703-0221 Maltese non-vented, black

RETAIL $43.95 48.95 48.95 44.95 44.95

2107-1500

0703-0063 SUG. RETAIL

0703-0235

0703-0236

SUG. PART # DESCRIPTION RETAIL FOR 84-E96 STYLE TANKS 0703-0239 Smoothie vented, chrome $49.95 0703-0240 Smoothie vented, black 49.95 0703-0241 Smoothie non-vented, chrome 49.95 0703-0242 Smoothie non-vented, black 49.95

PART # DESCRIPTION FOR L96-10 STYLE TANKS (CONT) 0703-0235 Smoothie vented, chrome $49.95 0703-0236 Smoothie vented, black 49.95 0703-0237 Smoothie non-vented, chrome 49.95 0703-0238 Smoothie non-vented, black 49.95

DS-390038

EXHAUST

Peaked

GAS CAPS

FUEL/AIR SYSTEMS

•Chrome-plated finish •Available in several styles •Sold each

ENGINE DS-390039

TRANSMISSION FLUSH-MOUNT GAS CAPS & DRIVELINE •High-tech look of aviation-style GASKETS & SEALS ELECTRICAL LIGHTING

fuel fillers •Simply screws into the stock opening in your gas tank •Keyed entry permits the low profile and prevents unauthorized entry •Outer rings prevent chips around gas opening •Available in vented and non-vented styles for 83 and later screw-in style tanks (L96-10 tanks will require reusing the stock gas cap gasket) •Sold each U.S. Patent #400838.

PART # DS-390038 DS-390039 0703-0219

DESCRIPTION SUG. RETAIL Vented Fat Bob-style (right-hand thread) $49.95 Non-vented Fat Bob-style (left-hand thread) 49.95 Repl. key for DS-390038, DS-390039 5.95

HANDLEBARS, CONTROLS & MIRRORS SPOKE GAS CAPS CABLES BRAKES TANKS & OIL FILTERS

SUG. RETAIL $214.95 214.95

0703-0303

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES GAS CAPS •CNC-machined from billet aluminum with a chrome finish TIRES, TUBES & •Sold each WHEELS •Made in the U.S.A. FOR 84-E96 STYLE TANKS HARDWARE, PART # DESCRIPTION CHEMICALS SPOKE Left side, non-vented & TOOLS 0703-0302 0703-0303 Right side, vented COVERS, SPROCKET Left side, non-vented SECURITY 0703-0300 Right side, vented & GENERAL 0703-0301

878

FOR L96-10 TANKS WITH SCREW-IN GAS CAP PART # DESCRIPTION PEAKED 0703-0294 Vented, right-hand threads 0703-0295 Non-vented, left-hand threads STOCK STYLE 0703-0296 Vented, right-hand threads 0703-0297 Non-vented, left-hand threads DOMED LOW-PROFILE 0703-0298 Vented, right-hand threads 0703-0299 Non-vented, left-hand threads

SUG. RETAIL $25.95 25.95 14.95 12.95 25.95 25.95

DEAD END GAS CAPS •Machined from billet aluminum •Chrome finish •Comes with steel weld-in bung •For custom applications only •Made in the U.S.A. PART # 0703-0243 0703-0244

DESCRIPTION Smooth, non-vented Smooth, vented

SUG. RETAIL $214.95 214.95

0703-0243 PART # 0703-0245 0703-0246

0703-0245

SUG. DESCRIPTION RETAIL Notched, non-vented $214.95 Notched, vented 214.95

POP-UP GAS CAP

DESCRIPTION Non-vented Vented

0703-0300

Domed Low-profile

0703-0247

•Machined from billet aluminum •Chrome finish •Comes with steel weld-in bung •For custom applications only •Made in the U.S.A. PART # 0703-0247 0703-0248

Stock style

SUG. RETAIL $199.95 199.95 199.95 199.95

•Features a weld-in, stainless steel bung with a pop-up aluminum gas cap •Measures 23/8” dia.

•Made in the U.S.A. PART # 0703-0113

DESCRIPTION Flush mount gas cap

GAS CAPS AND BUNGS •All styles are CNC-machined from billet aluminum •Vented and non-vented caps available •Caps with HD-style bung adapter fit 84-E96 right-hand screw-in style tanks •Caps with weld-in bungs are for custom applications •Bungs available separately for use with Covington gas caps

SUG. RETAIL $157.95

0703-0209

PART # DESCRIPTION NON-VENTED GAS CAPS WITH BUNG 0703-0206 Spoke cap, chrome, w/ steel weld-in bung 0703-0207 Spoke cap, raw, w/ steel weld-in bung 0703-0211 Sprocket cap, chrome, w/ weld-in steel bung 0703-0212 Sprocket cap, raw, w/ weld-in steel bung VENTED GAS CAPS WITH BUNG 0703-0208 Spoke cap, chrome, w/ steel weld-in bung 0703-0209 Spoke cap, chrome for 84-E96 right-hand screw-in style gas tanks 0703-0210 Spoke cap, raw, w/ steel weld-in bung 0703-0213 Sprocket cap, chrome, w/ weld-in steel bung 0703-0214 Sprocket cap, chrome for 84-E96 right-hand screw-in style gas tanks 0703-0215 Sprocket cap, raw, w/ steel weld-in bung GAS TANK BUNGS 0703-0216 Aluminum weld-in bung for custom aluminum tank applications

All part numbers in BOLD MAGENTA are new for 2010.

0703-0213 SUG. RETAIL $179.95 159.95 179.95 159.95 179.95 199.95 159.95 179.95 199.95 159.95 27.95

SECTION

15

WINDSHIELDS 1914-1525

TOURING 1914-1526

LUGGAGE

ZOMBIE GAS CAP

POP-UP CAP •Pop-up vented gas cap assembly is available in steel construction •Weld-in style, for custom applications •Made in the U.S.A. PART # 301170

DESCRIPTION Pop-up w/ steel bung

SUG. RETAIL $83.95

AERO GAS CAPS

•Leak-proof and oh so small •Weld-in unit drops into any steel tank for a minimalist look •Dimensions: bung measures 1.5” diameter; cap measures 13/4” diameter •Made in the U.S.A. PART # 0703-0065

SEATS & SISSY BARS

•Replacement gas caps for Drag Specialties gas tanks that accept Aero caps •Include keys, gasket and bolts

DESCRIPTION SUG. RETAIL Zombie vented gas cap $115.95

PART # 1914-1525 1914-1526

EXHAUST

DESCRIPTION 120mm vented (ea.)

95mm vented (ea.)

SUG. RETAIL $65.95 58.95

FUEL/AIR SYSTEMS

DS-390066

ENGINE DS-390054

TRANSMISSION & DRIVELINE

DS-390062

GASKETS & SEALS DS-390051

FLUSH-MOUNT GAS CAPS

DS-390052

•Aircraft-style flush-mount polished gas caps are available in 21/4” and 3” diameters •21/4” diameter caps come with or without key locks •Available in vented and non-vented versions •Feature “weld-in” or “bolt-in” style bungs •Bolt-in styles include bolts and nut plates, except PART #DS-390060 DESCRIPTION NON-LOCKING SUG. RETAIL WELD-IN STEEL BUNG 21/4” dia. vented DS-390050 $158.95 21/4” dia. non-vented DS-390051 158.95 3” dia. vented DS-390052 167.95 WELD-IN ALUMINUM BUNG 21/4” dia. vented DS-390054 158.95

LOCKING

ELECTRICAL DS-390060

LIGHTING

SUG. RETAIL

DS-390062 DS-390063 -

$183.95 183.95 -

-

DESCRIPTION NON-LOCKING SUG. RETAIL BOLT-IN ALUMINUM BUNG 21/4” dia. vented DS-390058 $167.95 21/4” dia. non-vented DS-390059 167.95 3” dia. vented DS-390060 171.95

LOCKING

SUG. RETAIL

DS-390066 DS-390067 -

$175.95 175.95 -

-

CABLES A26S

4250AE

BRAKES TBV45

FLUSH-MOUNT GAS CAPS •Top-quality aircraft-style flush-mount gas caps from Newton •Aluminum bolt-in cap kits come with mounting hardware •Vent converter TBV45 converts all Newton caps to vented; available separately PART # 4250AE A26S

DESCRIPTION 3” non-locking polished 11/2” non-locking polished

SUG. RETAIL $179.95 159.95

PART # TBV45

DESCRIPTION Vent valve converter

SUG. RETAIL $47.95

“LIVE TO RIDE” GAS CAP COVERS

FLUSH-MOUNT LOCKING CAPS •For use with Drag Specialties gas tanks that accept flush-mount gas caps PART # DS-390079 DS-390069

DESCRIPTION Gas cap set (one vented, one non-vented) Vented gas cap (ea.)

SUG. RETAIL $50.95 27.95

HANDLEBARS, CONTROLS & MIRRORS

•Gas cap covers are a great way to detail a bike •Available with a detailed chrome or gold-plated eagle/banner with the Live to Ride script recessed into each part •Covers are held on by special adhesive tape and include one left- and one right-hand eagle emblem •Sold in pairs

DS-390127 PART # FOR MOST 84-10 DS-390127 DS-390126

All part numbers in BOLD MAGENTA are new for 2010.

DS-390126

DESCRIPTION MODELS Gold Chrome

SUG. RETAIL $44.95 21.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

879

SECTION

15 ROUND SERIES

WINDSHIELDS

Diamond

Grooved

Wave

Flag

Flamed

Finned Smooth

TOURING

Old School Brass

Lightning

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS HEX SERIES

ENGINE

Finned

Smooth

Oval

Flag

Old School Brass

TRANSMISSION & DRIVELINE

Hose outlet facing forward

GASKETS & SEALS Hose outlet facing backward

ELECTRICAL LIGHTING

Hose outlet facing inward

HANDLEBARS, CONTROLS & MIRRORS

DS-390231

CABLES

POWER-FLO™ FUEL VALVES

BRAKES

•Valves feature a brass body with show-quality chrome plating or Old School Brass finish •Substantially higher fuel flow compared to OEM or aftermarket fuel valve •Necessary for adequate fuel delivery even on stock motorcycles and a must for high performance •Available for 84 and later models with a 22mm external thread •Adapter nut included on 22mm threaded valves •Patents apply •Made in the U.S.A.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

880

NOTE: All descriptions are made from a seated position on the motorcycle with a reference from outlet position to the reserve position of the fuel valve lever.

22MM DESCRIPTION ROUND 90° OUTLET FACING FORWARD Smooth DS-390240 Grooved DS-390241 Lightning DS-390242 Diamond DS-390243 Flamed DS-390244 90°OUTLET FACING BACKWARD Smooth DS-390250 Grooved DS-390251 Lightning DS-390252 Diamond DS-390253

22MM HEX DS-390231 DS-390233 -

22MM 22MM DESCRIPTION ROUND HEX 90°OUTLET FACING BACKWARD (CONT) Flamed DS-390254 180° OUTLET FACING INWARD Finned DS-390506 DS-390509 Wave DS-390507 Smooth DS-390260 DS-390235 Grooved DS-390261 Lightning DS-390262 Diamond DS-390263 Flamed DS-390264 Oval DS-390510

22MM 22MM DESCRIPTION ROUND HEX 180° OUTLET FACING INWARD (CONT) Smooth (down outlet) DS-390237 Flag 2107-0000 2107-0001 Old School Brass 0705-0094 0705-0092 CHROME ADAPTER NUTS FOR 84-06 HD 3/8 NPT x 22mm DS-390208 (approximately 7/8”) 22mm to 22mm 0705-0082 0705-0082 (approximately 7/8”)

PRICE LIST PART # 0705-0082 0705-0092 0705-0094 2107-0000 2107-0001 DS-390208 DS-390231 DS-390233

SUG. RETAIL $26.95 101.95 101.95 115.95 115.95 27.95 115.95 115.95

PART # DS-390235 DS-390237 DS-390240 DS-390241 DS-390242 DS-390243 DS-390244 DS-390250

SUG. RETAIL $115.95 128.95 115.95 115.95 115.95 118.95 115.95 115.95

PART # DS-390251 DS-390252 DS-390253 DS-390254 DS-390260 DS-390261 DS-390262 DS-390263

SUG. RETAIL $115.95 115.95 118.95 115.95 115.95 115.95 115.95 118.95

All part numbers in BOLD MAGENTA are new for 2010.

PART # DS-390264 DS-390506 DS-390507 DS-390509 DS-390510

SUG. RETAIL $115.95 115.95 115.95 115.95 115.95

SECTION

15

WINDSHIELDS HIGH-FLOW FUEL VALVE WITH CUSTOM ROUND KNOB

CHOPPER VALVE

•Custom knob features a detent for positive “on” position with ball-milled grooves that gives the valve a nice grip and a custom look •Substantially higher fuel flow than OEM or aftermarket fuel valves •Very universal; will work in any tank location •Valve features a brass body with show-quality chrome plating •Easy-to-read on, off and reserve positions •Made in the U.S.A. PART # DESCRIPTION 0705-0033 22mm round; 180° outlet facing inward

VACUUM FUEL VALVES

SUG. RETAIL $121.95

2107-0002

•Has the highest fuel flow of any vacuum-style fuel valve on the market •The same safety feature as OEM vacuum fuel valves – when valve is left in the “on” position with the motor off, fuel flow is shut off automatically •High-quality, lustrous chrome finish is the same as Pingel’s Power-Flo line of fuel valves •Fits all 94-06 stock applications with 22mm external thread •Will also fit 84-93 models if a vacuum source is tapped •Outlet is a single 5/16” hose barb and will acceptthe stock vacuum line 0705-0085 •Made in the U.S.A.

•Designed for use on bikes with custom fuel tanks that are raised high in front, which doesn’t allow proper fuel pickup with a standard reserve fuel valve •Keeps the bottom of the tank clean from fuel lines, giving universal options for mounting the fuel valve with mounting holes on the back of the valve •Smooth, clean lines with a compact design that measures 11/2” H x 2” L x 13/8” D •Easy-to-operate position selector knob with a ball detent for positive on/off/reserve locating •Two straight out 5/16” hose outlets •Requires two hoses to be routed from the tank: one for on and one for reserve •Provides exceptional fuel flow to feed the thirstiest big-inch motors •CNC-machined from billet brass, polished and chromed •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0705-0042 Chopper valve $195.95

POWER-FLO™ -6AN FUEL VALVE

NOTE: All descriptions are made from a seated position on the motorcycle with a reference from outlet position to the reserve position of the fuel valve lever.

PART # DESCRIPTION SUG. RETAIL HEX STYLE 2107-0002 Left side mount, outlet facing forward; or right side mount, outlet facing back $185.95 2107-0003 Left side mount, outlet facing back; or right side mount, outlet facing forward 185.95 2107-0004 Universal configuration, outlet facing down 185.95 ROUND STYLE 0705-0083 Left side mount, outlet facing forward; or right side mount, outlet facing back 185.95 0705-0084 Left side mount, outlet facing back; or right side mount, outlet facing forward 185.95 0705-0085 Universal configuration, outlet facing down 185.95

FUEL VALVE REBUILD KIT

DS-289141

DS-289141

DS-390285

IN-LINE CUSTOM FUEL VALVE

DESCRIPTION In-line fuel valve

HANDLEBARS, CONTROLS & MIRRORS

SUG. RETAIL $82.95

BRAKES TANKS & OIL FILTERS

DS-390226 PART # DS-390226

DESCRIPTION Fuel valve rebuild components only

THE GUZZLER® FUEL VALVES

SUG. RETAIL $75.95

DS-390504

•This is a serious fuel valve for serious riders •Hardcoat anodized billet aluminum and stainless steel construction •Spring-loaded detents for positive on-off positioning; no reserve available •Flows up to 211 ounces of fuel per minute •Available with 3/8” NPT or 22mm outlets (all single outlets face down) •Some styles available highly polished for that custom look 0705-0051 0705-0029 •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 22MM POLISHED 0705-0049 Dual 90° 5/16” outlets $171.95 0705-0050 Single -6AN outlet 165.95 0705-0051 Single 5/16” outlet 155.95 0705-0052 Single 3/8” outlet 155.95 22MM DS-390503 Dual 90° 5/16” outlets 173.95

ELECTRICAL

CABLES

NOTE: These kits are not designed for hose outlet down, dual or triple outlets, 1/4” NPT or race valves. Pingel recommends these valves be sent directly to them for rebuilding.

SUG. RETAIL $62.95

FUEL/AIR SYSTEMS

LIGHTING

•Designed with the bike builder in mind •Eliminates the need to worry about fuel valve location •Simple on/off valve without reserve or filter •Made in the U.S.A.

DS-390225

DESCRIPTION Fuel valve rebuild kit, complete

EXHAUST

GASKETS & SEALS

•Designed to rebuild Pingel 3/8” NPT and 22mm single-outlet valves •PART #DS-390225 includes all the special tools necessary, photos, instructions and enough components to rebuild three fuel valves •PART #DS-390226 includes enough components to rebuild five fuel valves; does not include any of the tools •A bench vise or press with a 61/2” or larger opening is necessary for installing a rebuild kit •Made in the U.S.A.

PART # DS-390225

SEATS & SISSY BARS

TRANSMISSION & DRIVELINE

DESCRIPTION SUG. RETAIL For 84 and later model tanks with 22mm external threads $146.95 -6AN fuel fitting 32.95

PART # 0705-0032

LUGGAGE

ENGINE

•Chrome-plated solid brass hex-design petcock features a -6AN outlet •For use with S&S E and G series carbs •Fitting sold separately •Made in the U.S.A. PART # DS-390285

TOURING

0705-0029 PART # 22MM (CONT) 0705-0029 DS-390504 DS-390505 5/16” POLISHED 0705-0057

DESCRIPTION

0705-0057 SUG. RETAIL

Single -6AN outlet Single 5/16” outlet Single 3/8” outlet

$144.95 155.95 155.95

Single 5/16” outlet

132.95

All part numbers in BOLD MAGENTA are new for 2010.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

881

SECTION

15

WINDSHIELDS

0705-0014

TOURING 0705-0016

LUGGAGE SEATS & SISSY BARS

0705-0021

0705-0089

0705-0017

0705-0064

0705-0020

0705-0018 0705-0015

0705-0023

0705-0019

0705-0022

0705-0061

“CLICK-SLICK” PETCOCKS

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

•Manufactured from 360 brass and stainless steel ball bearings and components; available in either a chrome or raw brass finish •Features detents for quick, effortless switching from “On” to “Reserve” to “Off” •90° movement between each detent ensures positive transition when riding •Stainless steel internal ball bearings provide virtually friction-free petcock handle motion •Valve position firmly held in place and unaffected by vibration •Can be modified to fit custom tanks and/or be set to determine amount of reserve gas available with any custom gas tank •Made in the U.S.A. PART # DESCRIPTION 3/8” NPT CHROME 0705-0014 Backward facing 0705-0015 Downward facing 0705-0016 Forward facing 0705-0017 Straight facing 0705-0018 6-AN 3/8” NPT RAW BRASS 0705-0086 Backward facing

GASKETS & SEALS

SUG. RETAIL $107.95 107.95 107.95 107.95 114.95 107.95

PART # DESCRIPTION 3/8” NPT RAW BRASS (CONT) 0705-0087 Downward facing 0705-0088 Forward facing 0705-0089 Straight facing 22MM CHROME 0705-0019 Backward facing 0705-0020 Downward facing 0705-0021 Forward facing

0705-0002

HANDLEBARS, CONTROLS & MIRRORS CABLES

107.95 107.95 107.95

SUG. RETAIL $107.95 114.95 107.95 107.95 107.95 107.95

PETCOCK

a round, smooth body with a chrome finish •Three-position knob (on, off, reserve) with a 5/16” fuel outlet •Fits most stock tanks and custom tanks with a 22mm outlet PART # 0705-0002 0705-0003 0705-0004

$107.95 107.95 107.95

PART # DESCRIPTION 22MM CHROME (CONT) 0705-0022 Straight facing 0705-0023 6-AN 22MM RAW BRASS 0705-0061 Backward facing 0705-0062 Downward facing 0705-0063 Forward facing 0705-0064 Straight facing

0705-0004

PETCOCKS ELECTRICAL FUEL •Hi-flow petcocks feature

LIGHTING

SUG. RETAIL

0705-0003

DESCRIPTION Inward facing outlet Down facing outlet Forward facing outlet

SUG. RETAIL $74.95 74.95 74.95

•Constructed from triple show-chrome plated brass •Features an adjustable 360° swivel outlet and clicking detent that allows for accurate and universal positioning •Significantly outflows stock and modified petcocks •Made in the U.S.A. NOTE: Not for fuel-injected models.

PART # 0705-0081

DESCRIPTION For stock and custom tanks w/ a 22mm outlet

SUG. RETAIL $79.95

BRAKES TANKS & OIL FILTERS HIGH-FLOW FUEL VALVE WITH SWIVEL SPIGOT

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

882

•Chrome fuel valve from Accel is designed to replace all right, left and rear spigot applications •Unique design that incorporates a banjo-type spigot with a 180° swivel onto a high-flow fuel valve with a 22mm nut •Fuel outlet nipple is 5/16” •Features a 100 micron fuel screen

HIGH-FLOW CHROME PETCOCK •Features on, off and reserve with an easy-to-use knob, 5/16” barbed fuel outlet and a fine wire-mesh screen •Valve has 3/8” NPT threads and comes with the 3/8” NPT to 22mm adapter nut •Fits all fuel tanks with 22mm outlet •Features a 100 micron fuel screen

NOTE: Won’t fit 3/8” NPT thread tanks.

PART # 5106

DESCRIPTION High-flow fuel valve w/ swivel spigot

DS-390218

SUG. RETAIL $100.95

PART # 5105

DESCRIPTION Accel high-flow petcock w/ nut

SUG. RETAIL $80.95

DS-390219

CHROME PETCOCKS •Includes filter screen, three-position control and high fuel flow •22mm thread fittings, straight or 90° outlet •All are sold each PART # 22MM DS-390218 DS-390219

DESCRIPTION Straight spigot; repl. OEM #s 62166-81, 62168-81 90° spigot; repl. OEM #62167-81

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $21.95 21.95

SECTION Back view

Back view

Stock valve w/adapter

15

WINDSHIELDS

0705-0005 0705-0059

TOURING

Stock valve

Front view

LUGGAGE

Front view

FUEL TANK SELECTORS •Custom-mounts the fuel valve at any location •Ideal for custom builds and choppers where the bottom of the fuel tank shows •Keeps fuel tank bottom clear of hoses or the petcock; allows you to get all the fuel out of raised front or stretched tanks by running hoses from the very low end of the fuel tank •Needs two fuel hoses routed from gas tank: one for on and one for reserve (hoses sold separately) •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0705-0005 Tank selector w/ face plate $222.95 0705-0059 Tank selector w/ one-hole bracket 245.95 0705-0060 Tank selector w/ two-hole bracket 245.95

BIG TWIN VALVE ADAPTER •Offers better fuel flow and retains the stock crossover connection of your 35-65 style Harley-Davidson split fuel tanks •Don’t let the stock fuel valve be the main jet — the stock fuel valve setup simply cannot support the fuel demands of today’s highperformance engine •Stainless steel gas tank adapter and any 22mm threaded Pingel PowerFlo or Guzzler fuel valve (sold separately) will drastically improve your fuel supply •Made in the U.S.A. PART # 0705-0053

DESCRIPTION Valve adapter

SUG. RETAIL $42.95

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

0705-0055

BUELL FUEL VALVE ADAPTER

GASKETS & SEALS

0705-0030

•Allows the mounting of any 22mm Pingel® fuel valve on Buell models •Bolts in place of the stock fuel valve •A must for modified motors that need a higher-flow-rate fuel valve •Fuel valve must be purchased separately •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0705-0027 For all 95-02 Buell models, except fuel-injected models $34.95

FUEL TANK OUTLET PLUG •Use to plug the outlet on fuel tanks that use either the fuel-injection or petcock adapter •Also for use on aftermarket fuel tanks that have dual fuel outlets, but only one is required for use •Polished chrome finish •Includes O-ring seal •Fits OEM and aftermarket fuel tanks that accept petcock adapter OEM #62842-00 (Drag PART #0705-0024) PART # DESCRIPTION SUG. RETAIL 0705-0054 Fuel tank outlet plug $14.95

ELECTRICAL TANK FITTING KIT FOR FUEL-INJECTION TO CARBURETOR CONVERSION •Use when converting from OEM fuel-injection systems to use a carburetor in order to deliver adequate fuel for large-displacement engines •Kit replaces the factory tank fittings, allowing the use of a high-quality, high-flow Pingel fuel valve to feed the carburetor •Made of stainless steel •Kits include adapter and plug or adapter only with O-rings or gaskets •See Pingel fuel valves on pages 880-881 •Made in the U.S.A.

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

NOTE: Due to tight tolerances in the tank fittings, a Pingel fuel valve is the only one that will fit.

PART # 0705-0031 0705-0055 0705-0030

DESCRIPTION For 00-03 models w/ Delphi EFI (adapter and plug) For 00-10 models w/ Delphi EFI (adapter only) For 95-01 FLT/FLHT models w/ Magneti Marelli EFI (adapter and plug)

SUG. RETAIL $42.95 24.95 42.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

PETCOCK ADAPTER

PETCOCK COVER

•Allows the use of a 22mm petcock in a fuel tank designed for Delphi fuel injection •Original equipment in 01-06 FXSTD, 03-06 Dressers and 04-06 Softail carbureted bikes •Includes O-ring for a leak-proof seal •Accepts any petcock that installs using a 22mm nut •Chrome-plated finish for great looks PART # 0705-0024

DESCRIPTION Petcock adapter; repl. OEM #62842-00

•Highly decorative chrome cover offers a unique custom look •Large hex knob provides easy operation •Installs quickly over OEM petcock •Fits 84-01 OEM petcocks SUG. RETAIL $16.95

PART # DS-390359

DESCRIPTION Petcock cover

FUEL LINE FITTING COVER •Streamlined, two-piece cover adds a touch of chrome PART # 0706-0037

DESCRIPTION For fuel-injected 01-07 Softails, 02-07 FLT, FLHT and FLHR fuel-injected models and 04-07 fuel-injected Dyna models

SUG. RETAIL $42.95

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $29.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

883

SECTION

15

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

IN-LINE FUEL FILTERS •Pingel® high-flow custom fuel filters are available in aluminum machined satin or chrome finish •Filters have a high-quality O-ring for a leak-proof seal •Cleanable, reusable 40 micron filter element •13/16” body length; 11/2” o.d.

•Works great with Pingel’s high-volume gas valves •Made in the U.S.A. PART # 0707-0005 0707-0006 0707-0007 0707-0008

DESCRIPTION 3/8” aluminum machined satin finish fuel filter (ea.)

3/8” aluminum chrome finish fuel filter (ea.)

-6AN aluminum machined satin finish fuel filter (ea.)

-6AN aluminum chrome finish fuel filter (ea.)

DS-391666 0707-0005 SUG. RETAIL $34.95 39.95 44.95 49.95

0707-0008

PART # DS-391662 DS-391663 DS-391666

PEAK FLOW FUEL FILTERS

DS-391662

DESCRIPTION SUG. RETAIL 5/16” chrome fuel filter (ea.) $43.95 5/16” aluminum machined satin fuel filter (ea.)

37.95 Repl. 40 micron bronze filter element w/ O-ring (ea.)

16.95

DS-391103

•Machined from 6061 T-6 billet aluminum, then polished and chrome-plated •Filter element is made from pleated 304 stainless steel; filters down to 10 microns and still flows 6 gal. a minute •Mini filter body measures 13/4” L; super mini body measures 7/8” L (less fittings) •Replacement filter element available •Made in the U.S.A.

DS-391100

MINI FILTER

TRANSMISSION & DRIVELINE GASKETS & SEALS

PART # DS-391102 DS-391103 DS-391104 DS-391105 DS-391106

DESCRIPTION fittings 5/16” fittings 3/8” fittings #4 AN fittings #6 AN fittings 1/4”

SUG. RETAIL $46.95 46.95 46.95 46.95 46.95

DS-391105 SUPER MINI FILTER PART # DESCRIPTION DS-391100 1/4” fittings 0707-00101 5/16” fittings

SUG. RETAIL $43.95 43.95

PART # DS-391107 1

DESCRIPTION SUG. RETAIL Repl. filter element (ea.) $14.95

Silver anodized finish, not chrome-plated.

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS

ANODIZED ALUMINUM FUEL FILTERS

ANODIZED FUEL FILTERS •Premium-quality custom Russell fuel filters with alloy cases and replaceable bronze elements •Compact size for easy installation; available in two sizes and several colors •Made in the U.S.A. SUG. PART # DESCRIPTION RETAIL PART # 1/4”, chrome $15.95 45070 45000 1/4”, red 45010 15.95 45080 1 45020 /4”, blue 15.95 45090 1/4”, black 45030 15.95 DS-391708 5/16”, chrome 15.95 45060

DESCRIPTION 5/16”, red 5/16”, blue 5/16”, black Repl. fuel filter element

SUG. RETAIL $15.95 15.95 15.95 6.95

•Customize and protect with the same filter •CNC-machined aluminum outer case •Cleanable brass filter element inside •Available in 1/4” and 5/16” sizes SUG. PART # DESCRIPTION RETAIL $8.95 14-34470 Red 1/4” 14-34471 Blue 1/4” 8.95 14-34472 Black 1/4” 8.95 14-34473 Purple 1/4” 8.95 14-34474 Gold 1/4” 8.95

DS-391673

DS-391674

PART # 14-34430 14-34431 14-34432 14-34433 14-34434

DESCRIPTION Red 5/16” Blue 5/16” Black 5/16” Purple 5/16” Gold 5/16”

DS-391672

DASHES & GAUGES

DS-391675

FRAMES, SUSPENSION & FENDERS DS-391671 14-34450 14-34460 FOOTRESTS & LICENSE CLEAR FUEL FILTERS FUEL FILTERS •Glass filters feature chrome ends PLATE FRAMES UNIVERSAL 1 5 •Sizes to fit /4” or /16” fuel lines •Available in two inlet sizes 1/4” or 5/16” i.d., and in two lengths: TIRES, •Glass fuel filters have glass body mini (13/8”) and standard (23/8”) with chrome end caps; include hose clamps and spare •Replacement filter elements available TUBES & nylon filter element PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION WHEELS •Metal high-performance fuel filters feature brass filter MINI FILTERS STANDARD FILTERS element, all-metal casing and hose clamps HARDWARE, 1/4” inlet 1/4” inlet DS-391673 $10.95 DS-391674 DESCRIPTION SUG. RETAIL 5/16” inlet 5/16” inlet CHEMICALS PART # DS-391671 10.95 DS-391672 5 /16” glass filter $9.95 & TOOLS 14-34450 5 DESCRIPTION 14-34460 /16” metal filter 8.95 PART # 1/4” glass fuel filter 9.95 REPLACEMENT ELEMENTS COVERS, 14-34451 1/4” metal filter Short 8.95 DS-391675 SECURITY 14-34461 Long Repl. filter (10-pk.) .90 (ea.) DS-391676 & GENERAL 14-34455

884

SUG. RETAIL $8.95 8.95 8.95 8.95 8.95

All part numbers in BOLD MAGENTA are new for 2010.

DS-391676

SUG. RETAIL $10.95 10.95 SUG. RETAIL $2.95 2.95

SECTION

15

WINDSHIELDS

0706-0005

TOURING FUEL TANK CROSSOVER LINES FUEL-INJECTION LINES •Huge upgrade over the drab stock kit •Lines are stainless steel braided •Chromed hard line and fittings resistant to all chemicals found in gasoline •Made in the U.S.A. PART # HDFL005

DESCRIPTION SUG. RETAIL Fuel-injection line for 95-99 FLHTCU-I, 98-99 FLHRC-I, 98-99 FLTR-I, 96-99 FLHTC-I, 96 FLTCU-I, 96-97 FLHR-I $159.95

•Replaces the stock rubber lower crossover lines with stainless steel lines •Seals with compression fittings for a positive seal 0706-0016 •Made in the U.S.A. PART # DESCRIPTION CROSSOVER LINES 0706-0007 For 97-07 FLT/FLHT models 0706-0004 For 00-10 FXST/FLST models (except Deuce) 0706-0005 For 00-07 FXSTD 0706-0006 For 86-99 FXST/FLST models 0706-0003 For 93-05 Dyna models REPLACEMENT WASHER 0706-0016 For fuel lines (6-pk.)

LUGGAGE SUG. RETAIL $26.95 26.95 26.95 28.95 26.95 .95

®

STERLING CHROMITE II FUEL TANK CROSS-OVER LINES

FITS MODEL 86-99 Softail 00-10 Softail (except Deuce) 00-07 Deuce 97-07 FLT/FLHT/FLHR 03 Dyna 04-05 Dyna

SUG. RETAIL $44.95 44.95 44.95 44.95 44.95 44.95

•Braided stainless steel, 9” long •Allows equal gas flow to both sides of tank •1/8” pipe thread fittings to tank and -3 chrome AN 90° hose ends •For use with custom tanks that have 1/8” NPT bungs in the bottom of the tank •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0706-0008 Crossover kit $44.95

PART # 0706-0059 0706-0060

DESCRIPTION 6” 9”

SUG. RETAIL $28.95 29.95

•Braided stainless steel DS-096648 hose features 5/16” i.d. for maximum fuel flow •Attach to crossover tubes with compression fittings for a positive seal – no more worm gear clamps •Made in the U.S.A. PART # DESCRIPTION 0706-0010 For 99-05 Dyna, 53/4” 0706-0011 For 86-99 FXST/FLST, 103/4” 0706-0012 For 00-10 FXST/FLST, 51/2” (except FXSTD) 0706-0031 For 00-07 FXSTD 0706-0030 For 97-07 FLT DS-096648 Universal stainless steel crossover fuel line (not for FXR and Dyna) for 1/4” outlets, 111/2” DS-222617 Repl. seals for crossover fuel line (6-pk.)

0710-0040

45.95 7.95

•3.5 quart capacity oil tanks in a chrome finish •Features a 1/4” pipe feed and return and 1/8” pipe vent •Center fill design •Measures 6” in dia. and 111/2” W •Made in the U.S.A.

All part numbers in BOLD MAGENTA are new for 2010.

DESCRIPTION Round Domed

LIGHTING

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

0710-0041

CUSTOM OIL TANKS

PART # FOR 84-99 FSXT/FLST 0710-0040 0710-0041

ELECTRICAL

CABLES SUG. RETAIL $41.95 39.95 34.95 33.95 41.95

SMOOTH-STYLE CUSTOM OIL TANK •Bolt-on oil tank with a custom wraparound look is easily installed •Made of chromed-finish, heavy-gauge steel •Conveniently located drain and chrome filler cap •Battery opening measures 73/8” L x 43/16” W x 59/16” D •Features a 3.5 quart capacity with Softail-type oil line fittings and a two-piece front mounting bracket for easy installation •Requires PART #DS-245262 drain plug •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-310231 Oil tank for 85-86 FX/FXWG $293.95 2.95 DS-245262 Chrome hex-head drain plug, 1/8” NPT

GASKETS & SEALS

HANDLEBARS, CONTROLS & MIRRORS

FUEL LINE CROSSOVERS

•Stainless steel braided #3 line •Two chrome 90° fittings •For use with custom tanks •Available in 6” or 9” lengths •Made in the U.S.A.

FUEL/AIR SYSTEMS

TRANSMISSION & DRIVELINE

CUSTOM FUEL LINE CROSSOVER KIT

LENGTH INCLUDING FITTINGS 111/2” 51/2” 7” 101/2” 51/4” 53/4”

FUEL LINE CROSSOVER FOR CUSTOM TANKS

EXHAUST

ENGINE

•Only Sterling Chromite® II uses the patented technology to create an exclusive braid that looks like chrome •Perfectly matches color and weave of all other Magnum Sterling Chromite II cables and lines •High-quality clear covering won’t discolor and makes cleaning easy •Polished chrome-plated ends •Complete compression-style line assemblies •Unique design eliminates leaks •Made in the U.S.A. PART # 0706-0024 0706-0025 0706-0026 0706-0027 0706-0028 0706-0029

SEATS & SISSY BARS

SUG. RETAIL $338.95 338.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

885

SECTION

15

WINDSHIELDS TOURING LUGGAGE WINGED FXST/

SEATS & FLST OIL TANK Guy winged oil SISSY BARS •Fat tank for custom frames EXHAUST FUEL/AIR SYSTEMS ENGINE

CHOPPER-STYLE OIL TANK

WINGED TOP MOUNT OIL TANK

•Also fit stock 84-99 FXST/FLST models with minor modification (frame plate must be notched for center fill hole) •125/8” wide •Raw finish •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR CHOPPER GUYS FXST/FLST AND RIGID FRAME KITS DS-360265 Winged standard internal feed oil tank $487.95

•Available with a standard internal feed •Has a raw finish and a top center filler hole •125/8” wide •For use in custom applications •Made in the U.S.A. PART # DS-360432

DESCRIPTION Winged standard feed oil tank

•Features a top-mount design with internal feed lines •31/2-qt. raw finish tank has a flat bottom, with plenty of room for the starter •Fits all Chopper Guys Rigid frames and custom applications •Made in the U.S.A.

SUG. RETAIL $487.95

PART # 0707-0002

DESCRIPTION Chopper-style oil tank

SUG. RETAIL $487.95

DS-310113

TRANSMISSION & DRIVELINE

DS-310232

0710-0022

GASKETS & SEALS ELECTRICAL WINGED OIL TANKS

0710-0021

•Features chrome finish and a winged design that fills the gap between the tank and frame •Includes filler cap and drain plug •Approximately 3.0 quart capacity

LIGHTING HANDLEBARS, CUSTOM OIL TANKS steel construction CONTROLS •Chrome-plated •Includes mounting tabs & MIRRORS •Available in side or center fill

PART # DESCRIPTION FOR 89-99 SOFTAIL MODELS DS-310232 Center-fill DS-310113 Side-fill

CABLES

•Domed ends •Designed with built-in battery box •Approximately 3.3 quart capacity

BRAKES

PART # DESCRIPTION FOR 84-99 FXST, FLST AND CUSTOM RIGID FRAMES 0710-0021 Center fill 0710-0022 Side fill

TANKS & OIL FILTERS DASHES & GAUGES

$199.95 214.95

SUG. RETAIL $319.95 319.95

DS-310119

0710-0081

DS-310102 DS-310109

CHROME OIL TANKS •A duplicate of the original equipment black oil tank, but this is highly polished and chromeplated for exceptional looks •Includes filler cap •Approximately 3.0 quart capacity

PART # DESCRIPTION FRAMES, 0710-0046 For 97-03 XL: repl. OEM #62475-97/62888-99 SUSPENSION DS-310119 For 94-96 XL; repl. OEM #62475-94 & FENDERS DS-310102 For 86-93 XL; repl. OEM #62475-83 FOOTRESTS FXR & LICENSE OIL TANK PLATE FRAMES •Formed steel CHROME OIL TANKS construction TIRES, •Features a side-fill design DS-350150 with a chrome finish TUBES & •PART #DS-310109 includes oil filler plug •Bolt-in application; #0710-0081 does not include filler plug; must be WHEELS •PART uses OEM mounts purchased separately DESCRIPTION SUG. RETAIL •Fittings, clamps and hoses included HARDWARE, PART # •Approximately three CHEMICALS 0710-0081 Oil tank for 00-09 Softail models (approx. 3.5 quart capacity quart capacity) $219.95 & TOOLS NOTE: Cap not included; DS-310109 Oil tank for 89-99 Softail models (approx. 3.0 must be purchased separately. quart capacity); repl. OEM #62498-89A 199.95 COVERS, PART # DESCRIPTION 0710-0089 Repl. oil filler plug for PART #0710-0081 16.95 SECURITY 7.95 0710-0003 For 86-94 FXR and most aftermarket FXR frames & GENERAL DS-350150 Repl. oil filler plug for PART #DS-310109 (ea.)

886

SUG. RETAIL

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $149.95 144.95 133.95

SUG. RETAIL $133.95

SECTION

WINDSHIELDS

PLUS ONE OIL PAN •Reduces engine oil temperature by 10 degrees on an 80 degree day •Increases capacity by one quart •Multiple integral baffles eliminate the stock plastic baffle with springs •Baker +1 pan has the feed located in the rear and the return in the front for a more complete system circulation •Structurally located integral boss for Alloy Art TXR stabilizer •2-piece is constructed of billet aircraft grade 6061 T-6 aluminum •1-piece pans are Cast A356 T-6 and available in silver or black •Made in the U.S.A. PART # DESCRIPTION FOR 99-10 FLT, FLHT, FLHR, FLHX, FLTR 1105-0025 2-piece billet; chrome 1105-0027 1-piece; silver 1105-0028 1-piece; black

SUG. RETAIL $999.95 499.95 499.95

TOURING 1105-0028

LUGGAGE

PART # DESCRIPTION FOR 93-98 FLT, FLHT, FLHR, FLHX, FLTR 1105-0026 2-piece billet; chrome 1105-0029 1-piece; silver 1105-0030 1-piece; black

FUNCTION-FORMED FL OIL SPOUT

SUG. RETAIL $999.95 499.95 499.95

PART # FOR 02-06 FLHT, FLHR, FLHX, FLTR 0710-00881 0710-00921 FOR 00-01 FLT, FLHT, FLHR, FLTR 0710-0087 0710-0091 FOR 93-99 FLT, FLHT, FLHR, FLTR 0710-0086 0710-0090

DESCRIPTION

SEATS & SISSY BARS EXHAUST

0710-0086

•Strong billet construction with a sleek and compact design that won’t interfere with largerbodied starters or side covers •Features a screw-in dipstick to keep the dipstick from popping out like stock dipsticks •Available with chrome or black-anodized finish •Made in the U.S.A.

1

15

FUEL/AIR SYSTEMS SUG. RETAIL

Chrome Black

$325.95 325.95

Chrome Black

185.95 185.95

Chrome Black

185.95 185.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

Includes polished stainless steel breather line.

ELECTRICAL OIL FILLER HOUSING KIT

LIGHTING

•Chrome die-cast aluminum housing •Comes complete with fitting, gasket, hardware and rubber hose •Converts 93-98 breather style to late-model method of breathing •Uses OEM dipstick

HANDLEBARS, CONTROLS & MIRRORS CABLES

PART # DESCRIPTION SUG. RETAIL 7805-3032 For 93-06 FLT, FLHT; repl. OEM #s 62419-93, 62470-02 $49.95

OIL TANK EDGING TRIM

BRAKES

•Replacement-type, chrome edging trim PART # DS-310225

DESCRIPTION For 85-86 FX and FXWG; repl. OEM #62534-65

SUG. RETAIL $14.95

TANKS & OIL FILTERS

OIL TANK BRACKET SET •Replace the dull front and rear oil tank bracket on your late-model Softail with these chrome brackets

•For battery boxes, oil tanks or custom parts •Meet or exceed all OEM specifications

NOTE: Rear bracket requires 5/16”-24 x 5/8” bolts to mount on 93-99 models.

PART # DS-310255

DASHES & GAUGES

VIBRATION MOUNTS

DESCRIPTION For 84-99 Softail; repl. OEM #62704-84 (rear), 62707-84 (front)

SUG. RETAIL $11.95

PART # 2404-0032

DESCRIPTION Repl. OEM #69123-92; features two 5/16”-18 studs, each 1/2” long DS-350145-PK Repl. OEM #62563-65; 1/4”-20 threaded studs and steel side plates; for mounting battery boxes and oil tanks (5-pk.)

SUG. RETAIL $7.95 (ea.)

2.95 (ea.)

VIBRATION MOUNT •Rubber mount with steel studs •Heavy-duty design has an internal spring for durability under high loads •Sold to dealer in five-pack, sold to consumer as each PART # 0710-0084

TOP OIL TANK BRACKET GROMMET •Rubber grommet with metal sleeve •Sold each to the consumer; sold to dealers in packs of 10

DESCRIPTION Repl. OEM #62563-65; 1/4”-20 x 1/2” studs (5-pk.)

SUG. RETAIL $3.95 (ea.)

PART # DESCRIPTION DS-391240 Repl. OEM #s 11447 (grommet) and 5775 (sleeve)

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $1.95 (ea.)

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

887

SECTION

15

WINDSHIELDS

LCD OIL TEMPERATURE GAUGE

7805-3030

•Billet aluminum with liquid crystal display •Push-button readout with automatic shutoff PART # DESCRIPTION SUG. RETAIL 0710-0033 For 00-10 FXST, FLST $89.95 7805-3042 For 84-99 FXST, FLST 89.95 7805-3030 For 86-03 XL models 89.95

TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

0710-0001

0710-0002

DS-330031

OIL DIPSTICKS

0710-0047

OIL PLUG TEMP GAUGE

DS-330039

•Sensitive to oil temperatures up to 350° F •Chrome gauge bezel PART # DS-330039 DS-330033 DS-330031 0710-0047

DS-330033

DESCRIPTION For all 00-10 FXST/FLST models For 84-99 FXST, FLST; 84-94 FXR; 84-92 FLT; 86-01 XL (23/4” L) For 85-86 FXWG (37/8” L) For XL 04-10

SUG. RETAIL $28.95 28.95 28.95 55.95

•Billet machined aluminum with a chrome finish •Caps feature knurled edges to allow a good grip •Plastic dipsticks have all required markings •Come with sealing gaskets SUG. PART # DESCRIPTION RETAIL 0710-0001 For 91-98 FXD, 93-98 FXDWG; repl. OEM #62685-95A $38.95 0710-0002 For 93-98 FLT/FLHT; repl.

OEM #s 62640-93, 62607-93 25.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

0710-0069

0710-0071

0710-0080

0710-0077

DEAD END OIL TANK PLUGS DEAD END OIL TANK DIPSTICK/PLUG •Machined from billet aluminum with a chrom •Replaces oil tank dipstick/plug •Comes with dipstick for easy oil level checking •Available in smooth and notched designs •Made in the U.S.A. NOTE: Oil must be checked with bike in level position.

PART # FOR 00-10 FXST/FLST 0710-0077 0710-0080

0710-0061

DESCRIPTION

SUG. RETAIL

Notched Smooth

$49.95 49.95

•Machined from billet aluminum, then finished in chrome •Replaces OEM oil plug •Available in smooth or notched style •Made in the U.S.A. PART # DESCRIPTION FOR 84-99 FXST/FLST MODELS AND CUSTOM APPLICATIONS (11/4” I.D. FILLER NECK) 0710-0069 Notched 0710-0071 Smooth FOR 84-98 FLT/FLHT MODELS AND CUSTOM APPLICATIONS (17/8” I.D. FILLER NECK) 0710-0068 Notched 0710-0070 Smooth

SUG. RETAIL

$51.95 51.95

57.95 57.95

0710-0062

TANKS & OIL FILTERS DASHES & GAUGES 0710-0059 FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES 0710-0049 TIRES, TUBES & OIL DIPSTICK CAPS CNC-machined aluminum WHEELS •Chrome-plated •Attach to the existing dipstick; replace the OEM aluminum cap HARDWARE, •Grooved relief allows easy removal of the dipstick CHEMICALS •Made in the U.S.A. SUG. SUG. & TOOLS PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL FOR 00-10 FXST/FLST (CONT) COVERS, FOR 00-10 FXST/FLST $67.95 0710-0059 Reflections $67.95 SECURITY 0710-0061 Warrior 67.95 0710-0049 Crusader Cross 67.95 & GENERAL 0710-0062 Ball milled

888

0710-0085

0710-0082

DIPSTICK COVERS

0710-0083

•CNC-machined from billet aluminum •Attach to existing OEM dipstick with included two-sided tape •Made in the U.S.A. PART # DESCRIPTION FOR 07-10 FLHT/FLHR/FLTR/FLHX 0710-0082 Black, finned 0710-0083 Chrome, finned 0710-0085 Black, diamond-edge

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $49.95 49.95 69.95

DEAD END OIL DIPSTICK COVER •Attaches to the dipstick, replacing the existing cap •Notched design with a chrome finish •Made in the U.S.A. PART # DESCRIPTION 0710-0066 For 99-06 FLT, FLHT, FLHX and FLHR models

SUG. RETAIL $36.95

SECTION

15

WINDSHIELDS SHOULDERLESS OIL LINE FITTINGS

OIL LINE ADAPTERS •Let you connect rubber or braided oil lines to your engine •Work like compression fittings so no ugly hose clamps are visible •Sold as a set of three •Made in the U.S.A. PART # 0711-0059

TOURING

•Made of custom polished stainless steel •3/8” x 1/8” oil pump or breather nipples •Install with 1/4” Allen wrench (included) •Sold in a package of three •Made in the U.S.A.

DESCRIPTION For all Twin Cam “B” motors

SUG. RETAIL $139.95

PART # 0932-0037

LUGGAGE

DESCRIPTION Shoulderless oil line fittings

SUG. RETAIL $22.95

SEATS & SISSY BARS

DS-245263

EXHAUST FUEL/AIR SYSTEMS

0711-0158

0711-0157

CHROME MOTOR CASE BREATHER FITTINGS OIL LINE FITTING KITS •For installation of custom oil lines on Twin Cam B motors •Available in chrome or black finish •Use with Russell stainless or black oil lines for a professional look •Accepts custom oil lines with AN6 and AN8 fittings •Made in the U.S.A. PART # 0711-0157 0711-0158

DESCRIPTION Black Chrome

SUG. RETAIL $28.95 29.95

DS-245265

•Highly polished and plated fittings •Sold each •Made in the U.S.A.

ENGINE DS-245264

SUG. PART # DESCRIPTION RETAIL FOR ALL 84-99 BIG TWIN MODELS $3.95 DS-245263 Straight 1/4” NPT x 3/8” hose DS-245264 90° 1/4” NPT street elbow (must use w/ PART #DS-245263) 5.95 DS-245265 45° 1/4” NPT street elbow (must use w/ PART #DS-245263) 7.95

DS-245252

DS-245200

DS-245205

DS-245259

DS-245250

DS-245260

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING

DS-245257 DS-245258

DS-245270

HANDLEBARS, CONTROLS & MIRRORS

DS-245278

DS-245261

CABLES DS-245276 DS-245272

DS-245274

BRAKES

HOSE AND TANK FITTINGS •Chrome finish; sold individually •Made in the U.S.A. PART # DS-245200 DS-245205 DS-245250 DS-245252 DS-245256 DS-245257 DS-245278 DS-245258 DS-245259 DS-245260 DS-245270 DS-245272 DS-245274 DS-245261 DS-245276

DESCRIPTION 45° elbow, 1/8” male NPT to 1/8” female NPT, for oil tanks, master cylinder, etc.

90° elbow, 1/8” male NPT to 1/8” female NPT, for oil tanks, pressure gauges, etc.

SAE inverted flare male connector, 3/16” o.d. tube to male 1/8” NPT, for H-D brake lines, etc.

3/8” union, to splice oil lines, cooler installations, etc.

SAE inverted flare 90° male elbow, 3/16” o.d. tube to male 1/8” NPT, for H-D brake lines, etc.

SAE inverted flare 45° male elbow, 3/16” o.d. tube to male 1/8” NPT, for H-D brake lines, etc.

SAE inverted flare female connector, 3/16” o.d. to female 1/8” NPT, for H-D brake lines, etc.

Male 90° hose connector, 3/8” hose to male 1/8” NPT, for oil tanks, coolers, etc.

Male 90° hose connector, 5/16” hose to male 1/8” NPT, used on oil tanks, gas tanks, etc.

Male 90° hose connector, 1/4” hose to male 1/8” NPT, for oil tanks, coolers, etc.

Male hose connector, 1/4” hose to male 1/8” NPT, for oil tanks, custom fuel tanks, etc.

Male hose connector, 5/16” hose to 1/8” male NPT, for oil tanks, coolers, etc.

Male hose connector, 3/8” hose to 1/8” male NPT, for oil tanks, coolers, etc.

Hex socket plug, 3/8” male NPT, for H-D petcocks, etc.

Hex socket plug, 1/8” male NPT, for custom petcocks, etc.

HOSE AND TANK FITTINGS

SUG. RETAIL $5.95 4.95 2.95 4.95 4.95 5.95 4.95 7.95 6.95 6.95 3.95 3.95 3.95 3.95 2.95

0711-0116

•Steel with a black chrome finish •Sold each •Made in the U.S.A. PART # DESCRIPTION 0711-0116 45° fitting, 1/8” male NPT to 1/8” female NPT 0711-0117 Straight Barb fitting, 1/8” male NPT to 3/8” female NPT 0711-0118 90° fitting, 1/8” male NPT to 1/8” female NPT

0711-0118 SUG. RETAIL $16.95 13.95 14.95

0711-0117

All part numbers in BOLD MAGENTA are new for 2010.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

889

SECTION

15

WINDSHIELDS

0711-0126

0711-0127

0711-0131

0711-0130

0711-0128

TOURING LUGGAGE SEATS & OIL TANK BREATHER KITS SISSY BARS •Releases power-robbing pressure from oil tank and crank case; EXHAUST FUEL/AIR SYSTEMS ENGINE

reduces blow-by and stops dipstick blowout •Promotes proper oil flow and oil tank function •Braided steel lines and stainless steel fittings; breather line coated with clear PVC •Gasket, thread sealant, necessary hardware and installation instructions included •Made in the U.S.A. PART # DESCRIPTION FOR 99-05 DYNA MODELS 0711-01261 Stainless 0711-01271 Black FOR 02-08 FLT MODELS 0711-0130 Stainless 0711-0131 Black

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

SUG. RETAIL $120.95 130.95

PART # FOR 99-01 FLT MODELS 0711-01282 0711-01292 1

189.95 189.95

2

0711-0129

DESCRIPTION

SUG. RETAIL

Stainless Black

$120.95 130.95

Requires removal of transmission/oil tank cover for installation.

Requires removal of dipstick housing for installation.

0711-0035

STAINLESS STEEL BRAIDED OIL LINE KITS •Direct replacements for OEM oil lines •Compression and NPT fittings are chrome-plated •Replacement washers are sold in 6-packs •Made in the U.S.A. PART # OIL LINE KITS 0711-0036 0711-0035 0711-0034 0711-0042 0711-0038 0711-0037

DESCRIPTION For For For For For For

0711-0063

SUG. RETAIL

L92-99 FXST/FLST models (4-line kit) 90-E92 FXST/FLST models (6-line kit) 87-89 FXST/FLST models (4-line kit) 92-98 Dyna models (3-line kit) 91-94 FXR models (5-line kit) 87-90 FXR models (4-line kit)

$126.95 173.95 146.95 112.95 153.95 153.95

PART # DESCRIPTION OIL LINE KITS (CONT) 0711-0041 For 94-03 XL models (3-line kit) 0711-0040 For 91-93 XL models (4-line kit) 0711-0039 For 86-90 XL models (5-line kit) REPLACEMENT WASHER 0711-0063 For oil lines (6-pk.)

SUG. RETAIL $112.95 146.95 126.95 .95

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

890

OIL LINE KITS

PRO SYSTEM INDIVIDUAL OIL LINES •Designed for applications when a stock oil line kit won’t work •Feature pre-assembled, individual 3/8” i.d. braided stainless steel Teflon® oil lines with rubber compression fittings •Fit most standard 3/8” single-barb oil fittings •Length given is the overall length, including the fittings •Replacement seals for compression fittings available separately •Made in the U.S.A. SUG. SUG. PART # LENGTH RETAIL PART # LENGTH RETAIL DS-222601 8” $29.95 DS-222614 24” $36.95 DS-222602 9” 29.95 DS-222615 26” 37.95 DS-222603 10” 29.95 0711-0076 28” 37.95 DS-222604 11” 30.95 0711-0077 30” 37.95 DS-222605 12” 30.95 0711-0078 32” 38.95 DS-222606 13” 31.95 0711-0079 34” 39.95 DS-222607 14” 31.95 0711-0080 36” 40.95 DS-222608 15” 32.95 DS-222616 Repl. compression DS-222609 16” 32.95 fitting seals DS-222610 17” 33.95 (12-pk.)

17.95 DS-222611 18” 33.95 DS-222612 20” 34.95 DS-222613 22” 35.95

•Engineered to replace stock hoses and outdated clamps •Designed to fit OEM oil tanks, but may work on aftermarket tanks •Finished in highluster chrome •Made in the U.S.A. PART # 50002 50001 50000 50003 50010

DESCRIPTION For L92-99 FXST, FLST For 90-E92 FXST, FLST For 87-89 FXST, FLST For 87-90 FXR For 92-98 Dyna

SUG. RETAIL $167.95 244.95 199.95 211.95 205.95

OIL LINE HOSE KIT •Oil hose feed kit for Softail bikes •Built with stainless steel hose and crimped on chrome ends •Made in the U.S.A. PART # 0711-0081

DESCRIPTION For 00-10 FXST/FLST models

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $56.95

SECTION HD0100CH

HD4503CH

WINDSHIELDS

0711-0046 600-06

UNIVERSAL STAINLESS STEEL BRAIDED OIL LINES •Available in various lengths for any custom application •Include 1/8” NPT chrome compression fittings for easy installation •Measured overall, including fittings •Made in the U.S.A. PART # 0711-0043 0711-0044 0711-0045 0711-0046 0711-0047 0711-0048 0711-0049 0711-0050 0711-0051

DESC, 8” 9” 10” 11” 12” 13” 14” 15” 16”

15

HD9003CH

SUG. RETAIL $26.95 27.95 27.95 28.95 28.95 25.95 29.95 30.95 31.95

TOURING

HD0103CH

UNIVERSAL OIL LINE AND -6 COMPONENTS

PART # 0711-0052 0711-0053 0711-0054 0711-0055 0711-0056 0711-0057 0711-0063

DESC, 17” 18” 20” 22” 24” 26” Repl. seals sold in 6-pk.

SUG. RETAIL $31.95 32.95 33.95 34.95 35.95 36.95 .95 (ea.)

•Premium-quality reusable oil line components •Chrome steel fittings and Teflon® hose are offered individually, so you can build the kit to suit your needs •Fittings are used with our stainless steel braided PTFE-lined hose to provide optimal performance for any Big Twin PART # 600-06 HD0100CH HD0103CH HD4503CH HD9003CH HD-WASHER-6

DESCRIPTION -6 stainless steel hose, 12’ Tank stub fitting Straight 1/8” NPT 45° 1/8” NPT 90° 1/8” NPT Repl. oil line washer kit, 6-pack

SUG. RETAIL $117.95 24.95 24.95 36.95 36.95 8.95

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

0711-0123 0711-0113

0711-0174 0711-0110

0710-0166 0711-0111 0710-0167

0711-0112

0711-0114

TRANSMISSION & DRIVELINE

0711-0121 0711-0115

0710-0170

0711-0119

0711-0120 0710-0171

UNIVERSAL BRAIDED OIL HOSE AND FITTINGS

0710-0173

0710-0172

•Black oil hose is made from braided nylon that resists abrasion and corrosion; contains a secondary CPE style rubber liner with a nylon inner braid •Endura oil hose is constructed with a stainless steel outer braid that resists abrasion or corrosion; contains a secondary CPE style rubber liner with a nylon inner braid •Very flexible yet will not collapse under extreme heat •Use with -6 or -8 full flow hose ends and adapter fittings; sold separately •Fittings and ends are constructed of lightweight black anodized aluminum or Endura stainless steel •Hose ends feature a 37° angled sealing surface for a positive anti-leak seal •Made in the U.S.A. BLACK ENDURA 11/32” -6 OIL HOSES 0711-0122 0711-0174 0711-0123 0711-0175 0711-0124 0711-0176 11/32” -8 OIL HOSES 0711-0184 0711-0186 0711-0187 0711-0185

PART # 0711-0110 0711-0111 0711-0112 0711-0113 0711-0114 0711-0115 0711-0119

SUG. RETAIL $12.95 33.95 34.95 22.95 5.95 13.95 5.95

DESCRIPTION

BLACK HOSE ENDS 0711-0110 0711-0181 0711-0111 0711-0182 0711-0112 0711-0183 0711-0125

6’ 10’ 20’ 3’ 6’ 10’

PART # 0711-0120 0711-0121 0711-0122 0711-0123 0711-0124 0711-0125 0711-0166

SUG. RETAIL $14.95 13.95 50.95 79.95 150.95 19.95 14.95

UNIVERSAL OIL LINES AND FITTINGS

PART # 0711-0167 0711-0168 0711-0169 0711-0170 0711-0171 0711-0172 0711-0173

ENDURA

DESCRIPTION

0711-0166 0711-0178 0711-0167 0711-0179 0711-0168 0711-0180 0711-0177

-6, -8, -6, -8, -6, -8, -6,

SUG. RETAIL $23.95 22.95 5.95 14.95 6.95 14.95 14.95

SUG. DESC. RETAIL 6” $39.95 7” 39.95 8” 40.95 9” 41.95 10” 41.95 11” 42.95 13” 43.95 14” 44.95

PART # 0711-0174 0711-0175 0711-0176 0711-0177 0711-0178 0711-0179 0711-0180

PART # 0711-0141 0711-0142 0711-0144 0711-0145 0711-0146 0711-0147 0711-0148

SUG. DESC. RETAIL 15” $45.95 17” 46.95 19” 48.95 20” 47.95 21” 49.95 24” 51.95 26” 51.95

end end end end

SUG. RETAIL $55.95 93.95 172.95 13.95 15.95 24.95 24.95

BLACK ENDURA ADAPTER FITTINGS 0711-0113 0711-0194 0711-0114 0711-0169 0711-0115 0711-0170 0711-0119 0711-0171 0711-0120 0711-0172 0711-0121 0711-0173 0711-0190 0711-0191 0711-0188 0711-0192 0711-0189 0711-0193

DESCRIPTION

PART # 0711-0181 0711-0182 0711-0183 0711-0184 0711-0185 0711-0186 0711-0187

PART # 0711-0188 0711-0189 0711-0190 0711-0191 0711-0192 0711-0193 0711-0194

SUG. RETAIL $14.95 24.95 23.95 30.95 89.95 53.95 88.95

-6 -6 -6 -6 -6 -6 -8 -8 -8

x x x x x x x x x

1/8”, 1/8”, 1/8”, 1/4”, 1/4”, 1/4”, 3/8”, 3/8”, 3/8”,

TWIN CAM VENT LINES

0711-0138

•Premium stainless steel braided hoses are available with female chromed steel swivel fittings that fit the universal chrome oil line fittings (sold separtately) •Featuring durable PTFE hose liners •Made in the U.S.A. NOTE: Oil line lengths are determined by measuring the distance between the flares of the female swivel fittings.

FITTINGS OIL LINES PART # 0711-0133 0711-0134 0711-0135 0711-0136 0711-0137 0711-0138 0711-0139 0711-0140

straight straight 45° swivel tube 45° swivel tube 90° swivel tube 90° swivel tube compression

0711-0150

0711-0151

SUG. PART # DESCRIPTION RETAIL 1 0711-0149 Straight /8” NPT adapter $7.95 0711-0150 Straight 1/4” NPT adapter 7.95 0711-0151 45° 1/8” NPT adapter 13.95 0711-0152 45° 1/4” NPT adapter 13.95 0711-0153 90° 1/8” NPT adapter 13.95 0711-0154 90° 1/4” NPT adapter 13.95

45° flare to pipe flare to pipe 90° flare to pipe flare to pipe 90° flare to pipe 45° flare to pipe 45° flare to pipe flare to pipe 90° flare to pipe SUG. RETAIL $7.95 15.95 14.95 15.95 6.95 15.95 22.95

1204-0031

•Replace unsightly stock crankcase-to-oil tank vent line •High-luster chrome finish •Match other Russell Pro System braided lines •Made in the U.S.A. PART # 1204-0031 0711-0082

DESCRIPTION For 02-06 FLHT, FLHR, FLTR For 99-01 FLHT, FLHR, FLTR

SUG. RETAIL $62.95 41.95

CRANKCASE VENT LINE •Highly chromed steel construction •Replaces the rubber OEM crankcase-to-oil tank line •Includes fittings for easy installation •Made in the U.S.A. PART # 0711-0032

All part numbers in BOLD MAGENTA are new for 2010.

ENGINE

0710-0168

DESCRIPTION For 02-06 FLT; repl. OEM #45808-02

SUG. RETAIL $49.95

GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

891

SECTION

15

WINDSHIELDS TOURING 0713-0042 0712-0030

LUGGAGE SEATS & SISSY BARS 0713-0042

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

0713-0043

OIL FILTER/OIL COOLER •Filtration system designed to be used as an additional filter along with stock oil filter •Drastically reduces contamination and viscosity breakdown •Protects engine from cylinder/piston/ring/ bearing wear, cylinder bore polishing and 0712-0103 extreme oil temperatures •Mounts above voltage regulator between frame rails to take advantage of air flow off front tire •Includes filter/cooler housing and mounting bracket, off-set oil filter adapter, braided steel lines and swivel fittings, spin-on oil filter and all necessary hardware •Made in the U.S.A. PART # DESCRIPTION SUG.RETAIL CHROME 0713-0042 For 99-10 FXST/FLST and Dyna (except 06-08 Dyna Low Rider) $498.95 0713-0043 For 06-08 Dyna Low Rider 498.95 0713-0044 For 99-10 FLHT, FLHR, FLTR 498.95 BLACK CHROME 0713-0045 For 99-10 FXST/FLST and Dyna (except 06-08 Dyna Low Rider) 498.95 0713-0047 For 99-10 FLHT, FLHR, FLTR 498.95 REPL. OIL FILTER W/ O-RING 0712-0103 For Feuling Oil Filter/Oil Cooler 22.95

PHANTOM OIL FILTER KIT •High-quality billet aluminum hidden oil filter system includes a weld-in and a bolt-in flange •For horseshoe-style oil tanks installed in aftermarket Softail or Rigid style frames •Cleans up front of motorcycle •Changing filter is easy; no messy drain pans, no oil running down the front of your motorcycle and no wrenches needed •Premium aircraft grade hardware, O-ring seals and complete instructions included •Made in the U.S.A. NOTE: 21/2” of flat surface area required; drilling and cutting required for installation.

NOTE: Will not fit center fill oil tanks.

NOTE: Will not fit stock Softail models without modifications made to frame above oil tank.

PART # 0712-0030

DESCRIPTION Oil filter kit

SUG. RETAIL $229.95

DS-275031

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

OIL FILTER CANISTER/OIL COOLER •External oil filter canister is made of polished and lacquered cast aluminum •Comes with chromed brass hose fittings, machined aluminum cap with O-ring seal, 7’ of 3/8” oil line, four hose clamps and four tie-wraps •Mounting hole size is 5/16” and center-to-center is 13/8” •Made in the U.S.A.

FRAMES, SUSPENSION & FENDERS FOOTRESTS PART # DESCRIPTION DS-275035 Perf-form filter canister & LICENSE PLATE FRAMES SPIN-ON FILTER-COOLER KIT •Polished billet aluminum filter housing FILTER CANISTER MOUNT TIRES, with stainless mounting plate •Chrome mounting bracket allows easy horizontal mounting of any Perf-form™ TUBES & •Mounts directly to any 3/4”-16 spin-on filter mount oil cooling with easy oil filter changes filter canister over the voltage WHEELS •Provides •Includes all necessary seals plus three high-efficiency replacement filters regulator in front of the engine •Bolts to left front footpeg HARDWARE, •Made in the U.S.A. and kickstand frame lug DESCRIPTION SUG. RETAIL CHEMICALS PART # •Sold individually DS-275031 For 92-10 FLHT, 91-10 FXD, 92-10 FXST/FXR, & TOOLS •Made in the U.S.A. 86-10 XL; replaces oil filter OEM #s 63731-99, 63813-90, 63796-77A, 63805-80, 63805-83 $190.95 PART # DESCRIPTION COVERS, 4.95 DS-275040 Perf-form filter canister mount SECURITY DS-275032 Repl. O-ring and flow valve kit for DS-275031 8.95 for 85-86 FX, FXST, and FXWG models & GENERAL DS-275112 Repl. oil filter (ea.)

892

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $173.95

SUG. RETAIL $35.95

SECTION

15

WINDSHIELDS TOURING CHROME OIL FILTER/ REGULATOR MOUNT •.250” machined-from-billet plate with oil passageways •Predrilled to accept regulator •Mounts to front motor mount •Comes with mounting hardware and fittings and uses PART #s DS-275113/117 filter •Made in the U.S.A.

LUGGAGE SEATS & SISSY BARS

PART # DESCRIPTION SUG. RETAIL DS-190781 For 84-99 FX models $108.95

EXHAUST

OIL FILTER MOUNTING BRACKET KIT

FUEL/AIR SYSTEMS

•Polished billet oil filter mounting bracket for Twin Cam engines was specially designed and created for the S&S 124” Twin Cam engines, but makes a great cosmetic and functional upgrade for engines built with stock Twin Cam crankcases as well •No voids or other casting defects in the material to cause leaks •Position of the filter has been shifted slightly to give additional clearance between the filter body and the crankcase for easier filter installation and removal •Also machined to make it easy to install an oil cooler in the pressure-side of the system; if a cooler is not needed, simply install the pipe plugs in the threaded holes in the filter bracket, instead of the hose fittings •Made in the U.S.A. PART # 0712-0059

BILLET OIL FILTER MOUNT

ENGINE

•Designed to mount directly to the engine case •Conceals oil lines, clamps and fittings for a clean look •Machined from billet aluminum and chromed to a mirror finish •Fits Evo engines with mounting bosses in the engine case •Comes complete with mounting bolts and fittings to accept 3/8” oil hoses

DESCRIPTION For 99-06 Twin Cam (except 06 Dyna) and all S&S T-series motors

PART # 0712-0038

DESCRIPTION For 92-99 80” Big Twins

SUG. RETAIL $165.95

BRAKES

DESCRIPTION For 92-99 80” Big Twin models

SUG. RETAIL $42.95

OIL FILTER MOUNTING KIT CUSTOM OIL FILTER MOUNT •Chrome filter mount features 3/8” fittings and may be used with stainless steel or rubber lines •Accepts all types of oil filters DESCRIPTION For 92-99 80” Evolution Big Twin models

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $99.95

TANKS & OIL FILTERS DASHES & GAUGES

PART # DESCRIPTION DS-275107 For all 92-99 Big Twin Evolution models; repl. OEM #s 2637892A/26381-92A

PART # DS-275104

LIGHTING

CABLES

•Designed to replace the OEM cast mount •Includes oil filter adapter •Mounts with OEM hardware •11/16” threads accept OEM hard lines

PART # DESCRIPTION SUG. RETAIL 0712-0269 For 99-10 Twin Cam “A” motors $128.95

ELECTRICAL

HANDLEBARS, CONTROLS & MIRRORS

CHROME OIL FILTER MOUNT

•6061 billet aluminum construction with a polished finish •Optimized oil passages flow almost 30% more efficiently than others on the market which means less oil pressure drop and cooler temps •Works with any aftermarket oil cooler •Made in the U.S.A.

$232.95

•Chrome-plated 1/2”-thick billet aluminum mount with 3/8” external fittings •Provides a low-cost, slim oil filter mount •Made in the U.S.A. PART # 0712-0035

GASKETS & SEALS

SUG. RETAIL

SLIMLINE BILLET OIL FILTER MOUNT

BILLET OIL FILTER MOUNT •Chrome-plated billet aluminum mount replaces cast OEM oil filter mount •Available in a smooth style •Tapped for 1/4” NPT fittings (sold separately) •Oil lines must be ordered separately •Made in the U.S.A. PART # DESCRIPTION 0712-0036 For 92-99 FXST/FLST, FXR and 91-98 Dyna Glide models (OEM #26378-92/26381-92)

SUG. RETAIL $135.95

TRANSMISSION & DRIVELINE

SUG. RETAIL $39.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

893

SECTION

15

WINDSHIELDS TOURING LUGGAGE DELUXE OIL LINE NACELLE COVER

SEATS & SISSY BARS EXHAUST

•Blankets the area between the cam cover and the transmission •Covers the oil lines and the exposed clutch cable where it enters the transmission cover •Easily installed PART # DESCRIPTION SUG. RETAIL 0711-0155 For 07-10 FXST/FLST $73.95

OIL LINE NACELLE COVER •Die-cast chrome cover dresses up the area between the cam cover and transmission •Stock chrome oil lines exit through the cover for a high-tech appearance PART # DESCRIPTION 0940-0495 For 00-06 FXST/FLST models

SUG. RETAIL $63.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

OIL HOSE COVER •Brighten an unfinished area on stock bikes •Die-cast aluminum with a beautiful chrome finish •Includes mounting hardware PART # 0940-0439

OIL LINE COVER •Chrome two-piece cover hides that plain rubber oil line beneath the right side of your oil tank

DESCRIPTION For 99-06 FLHT/FLHR/FLTR; repl. OEM #37946-99

GASKETS & SEALS

1902-0024

PART # 0711-0058

DESCRIPTION For 00-06 FXST/FLST models

DS-305020

SUG. RETAIL $39.95

OIL LINE COVER/ TRANSMISSION SHROUD •Oil lines disappear under a luscious layer of chrome •Also covers the rough-cast area around the transmission •Easy installation PART # DESCRIPTION DS-305020 For 99-05 FXD 1902-0024 For 02-06 FLT DS-305021 For 99-01 FLHR, 00-01 FLT

ELECTRICAL LIGHTING

SUG. RETAIL $39.95

SUG. RETAIL $69.95 94.95 69.95

HANDLEBARS, CONTROLS & MIRRORS CABLES CHROME BILLET ALUMINUM OIL DRAIN

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

•Unique drain mounts cleanly and easily to the rear of the transmission mounting plate •Utilizes existing OEM hardware (mounting bolt and hose clamp) •Works on stock bikes as well as those running wide tires with offset transmissions •Includes barbed oil line fitting and hex drive pipe plug •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-310241 For 86-99 FXST/FLST models $42.95

DS-310245

DS-310249

FRAMES, SUSPENSION DS-310247 DS-310249 & FENDERS OIL FILTER DRAIN TRAYS FOOTRESTS •Tired of hot oil running down your oil filter & LICENSE and all over your bike and floor?

PLATE FRAMES •Once the filter has been loosened, these unique drain trays fit underneath the oil filter and against the filter TIRES, mount to direct the oil into your catch pan – not all over your bike or TUBES & the floor WHEELS •Manufactured from a carefully selected polymer to resist chemical attack and dimensional distortion from the hot oil HARDWARE, •Easy to keep clean, and small enough to take with you on that long trip CHEMICALS •Indispensable in any shop, home garage or on the road in the U.S.A.; sold each & TOOLS •Made PART # DESCRIPTION SUG. RETAIL $17.95 COVERS, DS-310249 For 99-09 Twin Cam FLHT, FLHR, FLTR and 99-05 FXD 17.95 SECURITY DS-310247 For 84-99 Evolution Big Twin 18.95 & GENERAL DS-310248 For 86-03 XL

894

DS-310243

NO-PAIN OIL DRAINS •Specially modified quickrelease coupling makes oil changes a snap •Simply attach the drain hose to the special coupler, drain the oil, remove the hose from the coupler and refill the tank •No more oily mess or fumbling with a hose plug •DS-310245 installs in-line on the OEM drain hose on 89-99 FXST/FLST and 91-94 FXR models •DS-310243 replaces the stock oil plug on early-style (1/2”-20) oil tanks and remains permanently on the tank •Made in the U.S.A. by Custom Cycle Engineering PART # DESCRIPTION SUG. RETAIL DS-310245 In-line oil drain for 89-99 FXST/FLST and 91-94 FXR $77.95 71.95 DS-310243 1/2”-20 oil drain

All part numbers in BOLD MAGENTA are new for 2010.

SECTION

15

WINDSHIELDS DS-275109

0712-0021

DS-275108

0712-0011

DS-275203

0712-0019

DS-275119

2005-1400

0712-0023

TOURING

0712-0012

SPIN-ON OIL FILTERS •High-quality spin-on filters are a dependable replacement for most H-D models •Available in chrome and black versions •Twin Cam and V-Rod filters feature 10 micron paper •Filters with nut include a 17mm hex nut on the end of the filter for easy installation/removal SUG. BLACK SUG. DESCRIPTION BLACK RETAIL WITH NUT RETAIL For 99-10 Twin Cam models; repl. OEM #63798-99 DS-275109 $8.95 0712-0021 $9.95 For 84-98 FLT; 84-94 FXR; 84-99 FXST, FLST; 86-10 XL, 09-10 XR1200; repl. OEM #s 63796-77A, 63806-83 and 63805-80A DS-275204 7.45 0712-0019 9.95 For 91-98 Dyna Glide; repl. OEM #63813-90 DS-275119 8.95 0712-0023 9.95 For 02-10 V-Rod; repl. OEM #63793-01K 2005-1400 9.95 0712-0022 9.95 For 85-86 FX; repl. OEM #s 63782-80A and 63810-80 DS-275206 7.95 0712-0132 9.95

DS-275206

LUGGAGE CHROME DS-275108

SUG. RETAIL $10.95

CHROME WITH NUT 0712-0011

SUG. RETAIL $12.95

DS-275203 DS-275118 DS-275205

10.95 10.95 10.95

0712-0009 0712-0012 0712-0018

12.95 12.95 12.95

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

2005-0024

DS-275188

0712-0008

DS-275142

0712-0007

DS-275141

DS-275140

ENGINE

0712-0006

MAGNETIC RING OIL FILTERS •High-quality spin-on-style oil filters •Available in chrome or black •Magnetic filters are designed with a magnetic ring in center to capture small particles of loose metal and come with •Twin Cam and V-Rod filters feature 10-micron paper •Some filters come with a 17mm nut on the end of the filter for easy installation/removal APPLICATION BLACK SUG. RETAIL CHROME SUG. RETAIL For 02-10 V-Rod; repl. OEM #63793-01K 2005-0024 $13.95 For 99-10 Twin Cam; repl. OEM #63798-99 (31/4”) DS-275188 $13.95 DS-275142 12.95 DS-275127 13.95 For 91-98 FXD; repl. OEM #63813-90 (51/2”) For 84-98 FXST/FLST, 84-98 FLT/FLHT, 86-10 XL, 09-10 XR1200, 84-94 FXR; repl. OEM #s 63796-77A, 63806-83, 63805-80A (31/4”) DS-275141 10.95 DS-275126 12.95 For 85-86 FX; repl. OEM #s 63782-80, 63810-80 (21/4”) DS-275140 10.95 DS-275125 12.95

TRANSMISSION & DRIVELINE

pressure relief valves

CHROME WITH NUT SUG. RETAIL 0712-0008 $14.95 0712-0007 14.95 0712-0004 0712-0006

14.95 14.95

GASKETS & SEALS ELECTRICAL LIGHTING

HD-V

DS-275130

DS-275111

DS-275114

HD-2L

DS-275129

DS-275128

DS-275113

DS-275117

PERF-FORM OIL FILTERS •Black or chrome Perf-form oil filters have a proven service record •Made from the best materials and allow for quick changes •PART #s DS-275114 and HD-2L also fit most H-D accessory spin-on kits •Made in the U.S.A. SUG. PART # DESCRIPTION RETAIL HD-V Black filter for 02-10 V-Rod models; repl. OEM #63793-01K $11.95 DS-275130 Chrome filter for 99-10 Twin Cam models (3.5”) w/ anti-drain back valve 15.95 DS-275111 Black filter for 99-10 Twin Cam models (3.5”) w/ anti-drain back valve 10.95 DS-275114 Chrome filter for all 84-98 FLT/FLHT; 84-99 FXST, FLST; 86-10 XL, 09-10 XR1200; for all 94-02 Buell models (exc.

Blast); repl. OEM #63796-77A (4.125”) 15.95 HD-2L Black filter for all 84-98 FLT/FLHT (including fuel-injected models); 84-99 FXST, FLST; 86-10 XL, 09-10 XR 1200; for all 94-02 Buell models (exc. Blast); repl. OEM #s 63805-80, 63806-83 (4.125”) 11.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

0712-0058

PART # DESCRIPTION DS-275129 Chrome filter for all 91-98 Dyna Glide models; repl. OEM #63813-90 (5.5”) DS-275128 Black filter for all 91-98 Dyna Glide models; repl. OEM #63812-90 (5.5”) DS-275113 Chrome filter for 85-86 FXWG; repl. OEM #s 63810-80, 63782-80 (2.25”) DS-275117 Black filter for 85-86 FXWG; repl. OEM #s 63810-80, 63782-80 (2.25”) 0712-0058 Black filter for 00-10 Blast, 03-10 Firebolt XB9R, 05-10 Lightning City XXB9SX/Lightning XB12CG, 03-04 Lightning XB9S, 04-10 Firebolt XB12R/Lightning XB12S

SUG. RETAIL $15.95 10.95 14.95 9.95

11.95

FLO STAINLESS STEEL, REUSABLE “SPIN ON” OIL FILTER •Made from laser cut, medical grade, 304 stainless steel micronic filter cloth, this filter provides 200% more filter area in many cases •Stainless filter catches items down to 35 microns, which is about three times better than most good paper or brass filters •Unlike glued paper filters, the FLO Oil Filter pleat seam is welded and able to withstand up to 600 degrees •Filters maintain consistent flow under all conditions including extreme heat, the presence of water, and cold start ups where paper filters can flow so poorly that they often cause the bypass valve to open and allow unfiltered oil to enter your engine •Anti-drain back valves are not required for this filter DESCRIPTION •Features polished aluminum billet housing For 99-10 Twin Cam (all) •Should be the last filter an owner ever needs; this high tech filter technology is For 91-98 Dyna Glide widely used in all types of auto racing including NASCAR, Indy type cars, Formula 1 For 84-98 FLT, 84-99 Softail, 86-10 XL, and in the Aerospace industry where filtration is of the utmost importance 09-10 XR1200 •Clean the element, spring and housing with solvent, kerosene, contact/brake For Buell 97-02 MC Cyclone, cleaner or any degreasing agent, even common dish soap and water; see LUBES 95-02 S3 Thunderbolt, 96-02 X1 Lightning section for options (do not clean with gasoline)

All part numbers in BOLD MAGENTA are new for 2010.

PART # SUG. RETAIL 0712-0219 $109.95 0712-0219 109.95 0712-0219

109.95

0712-0219

109.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

895

SECTION

15

WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

0712-0099

OIL FILTERS •K&N delivers a Race-Spec oil filter which is built with a synthetic media specifically designed to withstand the high concentrates of synthetic racing oils •Synthetic filter media provides outstanding filtration at high-flow rates •Built to racing specifications •17mm hex nut allows easy-on/easy wrench-off •Predrilled for safety wire security •Protected by a heavy-duty canister and a double-rolled base plate •Check-valve/anti-drain back valve prevents drain-back and dry starts; where applicable •Prelubed base gasket for optimum seal •TUV production monitored and endorsed ensures the highest quality filters available •Performance Gold (PG) filters do not include a bypass valve DESCRIPTION For 99-10 Twin Cam For 91-98 Dyna Glide For 84-98 FLT, 84-94 FXR, 84-99 Softail, 86-10 XL, 09-10 XR1200; all 94-02 Buell models (exc. Blast) For 03-10 V-Rod For 85-86 FL/FX 4-speed For 02-10 Buell Blast 500 (all), 04-10 Firebolt XB12R 1200, 03-09 Firebolt XB9R 900, 03-10 Lightning/CityX XB9S/SX 900, 04-10 Lightning XB12S/SCG 1200 PART # 0712-0045 KN-170

SUG. RETAIL $14.95 14.95

TRANSMISSION & DRIVELINE EMGO OIL FILTERS GASKETS & SEALS ELECTRICAL LIGHTING

PART # KN-170C KN-171B

REPLACES OEM # BLACK 63798-99, 63731-99 KN-171B 63812-90, 63813-90 63796-77A, 63805-80A 63793-01K 63782-80, 63810-80A -

6380600Y

SUG. RETAIL $16.95 14.95

PG BLACK -

PART # KN-171C KN-172C

•Sturdy steel canister houses the finest filtering media and internal components available •Canister is slightly smaller in diameter than stock filters to make them easier to remove and install •Designed with a direct bypass valve that routes bypass oil directly to the filter exit, which minimizes the amount of contaminants carried to the engine in the unfiltered bypass oil •The nominal particle capture size is smaller than that of stock filters while the resistance to oil flow is nearly the same •Available in black and chrome finish •Made in the U.S.A.

PG CHROME CHROME KN-171C KN-173C -

KN-170 KN-170C KN-174C KN-172C -

0712-0045 -

-

SUG. RETAIL $16.95 14.95

PART # DESCRIPTION FOR 99-10 TWIN CAM 0712-0101 Black 0712-0102 Chrome FOR 84-99 BIG TWIN 0712-0099 Black 0712-0100 Chrome

-

PART # KN-173C KN-174C

0712-0100

OIL FILTERS

SUG. RETAIL $17.95 16.95

SUG. RETAIL $10.95 13.95 10.95 13.95

•Only the highest quality paper, metal and rubber are used to manufacture these top-grade filters •Bonded with extra strong epoxy (polyvinyl acetate) for long life •Clean oil makes engines last longer DESCRIPTION 91-98 Dyna Glide; repl. OEM #63812-90, 63813-90 84-98 FLT, 84-94 FXR, 84-99 FXST/FLST, 86-10 XL, 09-10 XR 1200; all 94-02 Buell models (exc. Blast); repl. OEM #63731-99/A, 63781-72R, 63796-77/A, 63798-99/A, 63805-80/A, 63806-83 85-86 FL/FX 4-speed; repl. OEM #63782-80, 63810-80A 1

EMGO BLACK EMGO CHROME 10-82430 10-82420 10-82410 10-82400 10-82450 10-07700

1

10-82440 10-07800

PRICE LIST PART # 10-07700 10-07800 10-82400 10-82410

1

Micro-Tech filter.

SUG. RETAIL $5.95 6.95 8.95 6.95

PART # 10-82420 10-82430 10-82440 10-82450

SUG. RETAIL $10.95 8.95 11.95 7.95

HIFLOFILTRO® OIL FILTERS

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

896

•The original Hiflofiltro factory was founded in 1955 and has been manufacturing filters for the OEM motor industry since 1963 •With the experience of more than five decades, constant research and development and featuring a completely modern production facility Hiflofiltro offers some of the best quality filters in the world •TUV approved and production monitored to ensure OEM or better quality HF171B •Constructed using the best materials available HF174C •One of the broadest ranges of aftermarket coverage FITS MODEL For 99-10 Twin Cam models (anti-drain back valve) For 91-98 Dyna Glide For 84-90 FLT, 84-94 FXR, 84-99 Softail, 86-10 XL, 09-10 XR 1200 For 85-86 FL/FX 4-speed For 97-02 Cyclone M2, 94-02 Lightning S1/X1, 02 White Lightning X1W, 94-02 Thunderbolt S2/S2T/S3/S3T For 00-10 Buell Blast, 03-10 Buell Firebolt XB9R/Buell Lightning XB9S, 04-10 Buell Firebolt XB12R/Buell Lightning XB12S For 09-10 Buell 1125R/CR For 02-10 V-Rod 1

REPLACES OEM # 63798-99, 63731-99 63812-90, 63813-90 63796-77A, 63805-80A 63782-80, 63810-80A

BLACK HF171B HF170B -

SUG. RETAIL $7.05 7.05 -

CHROME HF171C HF173C HF170C HF172C

SUG. RETAIL $9.35 12.30 9.50 9.35

63805-80A

HF170B

7.05

HF170C

9.50

63806-00Y -

0712-0044 0712-02131 -

7.80 9.95 -

HF174C

9.35

Drop-in cartridge filter.

OIL FILTERS •High-quality filters are made to strict specifications to provide superior performance •Micron rating of 10 traps microscopic dirt particles without restricting oil flow •Pressure relief valve ensures regular oil flow •Include all necessary O-rings or gaskets •Available for spin-on applications FITS MODEL For 99-10 Twin Cam (anti-drain back valve) For 91-98 Dyna Glide For 84-98 FLT, 84-94 FXR, 84-99 FXST/FLST, 86-10 XL, 09-10 XR 1200; all 94-02 Buell models (exc. Blast) For 85-86 FL/FX 4-speed For 00-10 Buell Blast, 03-10 Buell Firebolt XB9R/ Buell Lightning XB9S, 04-10 Buell Firebolt XB12R/ Buell Lightning XB12S, 06-07 Ulysses XB12X PART # PH4967

SUG. RETAIL $9.00

PART # PH6019

SUG. RETAIL $14.60

PART # PH6022

OIL FILTER MAGNETS PH6022

PH6068

PH6065

PH6019

REPLACES OEM # 63798-99, 63731-99 63812-90, 63813-90 63731-99/A, 63781-72R, 63796-77/A, 63798-99/A, 63805-80/A, 63806-83 63782-80, 63810-80A

BLACK PH6022 -

CHROME PH6068

-

PH6065 PH6019

63806-00Y

PH4967

SUG. RETAIL $10.30

PART # PH6065

SUG. RETAIL $18.30

PART # PH6068

SUG. RETAIL $19.60

All part numbers in BOLD MAGENTA are new for 2010.

•Polished ceramiccoated magnets •Two mini magnets designed for smaller motorcycle filters •No restriction in oil flow •SAE-tested engine safe •Rated to a temperature of 842°F •Removes a majority of wear particulates down to .5 microns •Improves engine efficiency •Sold in pairs PART # DESCRIPTION SUG. RETAIL 0712-0139 Magna-Guard filter magnets $7.95

SECTION

15

WINDSHIELDS TOURING LUGGAGE

0713-0003

SEATS & SISSY BARS EXHAUST 0713-0002

0713-0059

0713-0029

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING

0713-0005

HANDLEBARS, CONTROLS & MIRRORS

OIL COOLERS INSTALLATION TIME MEASURED IN MINUTES EXTRA RIDING TIME MEASURED IN YEARS •Cooler oil makes engines last longer – simple as that!

•Jagg oil coolers feature cutting-edge technology to keep your engine cool under the most punishing conditions •And because they’re designed to look as good as they perform, they’ll perfectly complement your bike’s style •Hoses and clamps are included with oil cooler kits

CABLES BRAKES

ENGINEERED TO PERFORM •Multipass oil flow configuration ensures the oil’s utilization of the entire oil cooler •Specially designed turbulators in each oil passageway gently stir oil, exposing it to more critical heat dissipation surface area for superior cooling with minimal oil pressure restriction •Highly concentrated mini-louvered air fins allow maximum heat transfer •Made in the U.S.A.

0713-0025

TANKS & OIL FILTERS DASHES & GAUGES

NOTE: Vertical oil coolers do not fit touring models with lower fairings.

0713-0007

NOTE: Ten-row coolers are recommended for 95” and larger motors.

NOTE: Twin Cam models will require the 6-ROW VERTICAL-MOUNT OIL COOLERS DESCRIPTION For 84-10 FXST/FLST For 91-10 FXD/FXDWG For 84-10 FLHT/FLHR/FLTR For 84-99 FXR For 86-10 XL

use of oil filter adapter PART #J4600 or 0713-0031 to access oil supply.

DELUXE 0713-0002 0713-0002 0713-0002 0713-0002 0713-0002

SUG. RETAIL $226.95 226.95 226.95 226.95 226.95

10-ROW INLINE VERTICAL-MOUNT OIL COOLERS DESCRIPTION For 00-10 FXST/FLST For 84-10 FLHT/FLHR/FLTR

BLACK 0713-0029 0713-0030

6-ROW LOW-MOUNT HORIZONTAL OIL COOLERS DESCRIPTION For 00-10 FXST/FLST For 84-08 FLHT/FLHR/FLTR

BLACK 0713-0025 J1270

SLIMLINE 0713-0003 0713-0003 0713-0003 0713-0003 0713-0003

SUG. RETAIL $180.95 180.95 180.95 180.95 180.95

SUG. RETAIL $210.95 210.95

SUG. RETAIL $190.95 190.95

CHROME 0713-0005 0713-0005 0713-0005 0713-0005 0713-0005

SUG. RETAIL $299.95 299.95 299.95 299.95 299.95

CHROME 0713-0058 0713-0059

SUG. RETAIL $279.95 279.95

CHROME 0713-0007

SUG. RETAIL $226.95

OIL COOLERS continued on next page

All part numbers in BOLD MAGENTA are new for 2010.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

897

SECTION

15

WINDSHIELDS

OIL COOLERS (CONT)

TOURING LUGGAGE SEATS & SISSY BARS 0713-0064

0713-0065

EXHAUST

0713-0066

0713-0054

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

0713-0063

J1390

10-ROW LOW-MOUNT HORIZONTAL OIL COOLERS DESCRIPTION BLACK SUG. RETAIL For 91-10 FXD/FXDWG 0713-0064 $226.95 For 84-08 FLHT/FLHR/FLTR 0713-0054 226.95 For 09-10 FLHT/FLHR/FLTR 0713-0066 226.95

CHROME 0713-0065 0713-0063 -

SUG. RETAIL $269.95 269.95 -

6-ROW HIGH-MOUNT HORIZONTAL OIL COOLER DESCRIPTION BLACK For 96-02 BUELL J1390

SUG. RETAIL $279.95

ELECTRICAL J4600 Back

J4400 Front

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

J4600 Front

0713-0031 Back

J4400 Back

0713-0031 Front

CABLES OIL COOLER ADAPTERS

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

•Allow quick-and-easy access to oil supply for any oil cooler installation •Advanced design allows hot oil to go through the oil filter before it is routed 0713-0049 0713-0048 0713-0050 through the oil cooler, resulting in less overall restriction and pressure drop •PART #0713-0031 features an integrated automatic thermostatic actuator to ensure rapid engine warm-up •Anti-rotation kits (sold separately) ensure that the oil filter adapters PART #S J4600 and 0713-0031 cannot rotate during oil filter removal •PART #0713-0050 upgrade nut is designed to replace the stock threaded oil filter mounting stem on applications where stem is too long, to ensure proper oil flow characteristics when installing adapter PART #J4400 •Made in the U.S.A. SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL J4400 Adapter for all H-D models w/ front-mounted 4600GK Service kit (repl. gasket) for oil filter adapter spin-on filters (except fuel-injected Evolution PART #s J4600 and 0713-0031 $9.95 and all Twin Cam models) $85.95 0713-0048 Off-set anti-rotation kit for adapter PART #s J4600 J4600 Off-set adapter for fuel-injected Evolution and and 0713-0031, Twin Cam A models 9.95 all Twin Cam models 110.95 0713-0049 Off-set anti-rotation kit for adapter PART #s J4600 0713-0031 Off-set adapter w/ automatic thermostat for and 0713-0031, Twin Cam B models 9.95 fuel-injected Evolution and all Twin Cam models 150.95 0713-0050 J4400 oil filter adapter upgrade nut for S&S motors 15.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE 0713-0013 PLATE FRAMES CLAMPS •For mounting Jagg’s TIRES, universal oil coolers, custom oil coolers, and TUBES & many other applications WHEELS •Sold each HARDWARE, •Made in the U.S.A. DESCRIPTION CHEMICALS PART # 0713-0013 1” dia. frames & TOOLS 0713-0014 For For 11/8” dia. frames COVERS, 0713-0015 For 11/4” dia. frames SECURITY 0713-0016 For 131/8” dia. frames & GENERAL 0713-0017 For 1 /2” dia. frames

898

AUTOMATIC OIL COOLER BY-PASS VALVE

SUG. RETAIL $6.95 6.95 6.95 6.95 6.95

•Valve acts as an automatic thermostat allowing you to by-pass the cooler for cold weather riding or faster warm ups on cool days •Works with all oil coolers •Durable anodized billet aluminum construction •Compact in-line installation •Includes all necessary hardware and easy to follow installation instructions SUG. PART # 0713-0069

DESCRIPTION Automatic by-pass valve

RETAIL $84.95

OIL COOLER BYPASS VALVE •Bypass valve J4000B works in conjunction with all oil coolers as a manual version of a thermostat •Compact design blends into the oil lines, offering a less cluttered appearance •Made in the U.S.A. PART # DESCRIPTION J4000B By-pass valve for all oil coolers

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $64.95

SECTION

15

WINDSHIELDS TOURING 1911-5002

0713-0052

LUGGAGE 1911-5004 0713-0056

SEATS & SISSY BARS

DS-310204

CHROME OIL COOLER KIT •Kits mount to frame tubes with supplied clamps and reducers •Available with or without a temperature gauge •Comes with AN #6 fittings (use with -6 lines found in most speed shops) •If using standard 3/8” hose, use breather fittings PART #DS-245263 (sold separately) •Measures 12” L x 2.25” diameter •CNC machined from billet aluminum and chrome plated •Replacement clamps available separately •Made in the U.S.A. PART # DESCRIPTION FOR 1” TO 11/4” FRAME TUBES DS-310204 Oil cooler 0713-0052 Oil cooler w/ temp gauge 0713-0056 Replacement clamp FOR 11/2” FRAME TUBES 0713-0019 Oil cooler 0713-0051 Oil cooler w/ temp gauge 0713-0057 Replacement clamp

SUG. RETAIL $330.95 385.95 66.95 330.95 385.95 66.95

EXHAUST

1911-5007

TUBE OIL COOLERS •Available in chrome, black with polished fins or all-black styles •Coolers mount to the front down tube of the frame •Twin Cam applications require an adapter to provide easy access to the oil supply (sold separately) •Cooler includes required mounting hardware; hose clamps and oil line must be purchased separately (uses 3/8” i.d. oil line) •Measures approximately 101/2” long with a 1” diameter •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 99-08 FLHT/I, FLHR/I, FLTR/I, FLHTCU/I (11/8” AND 11/4” CLAMPS) 1911-5010 Chrome $438.95 1911-5011 Black w/ polished fins 438.95 1911-5012 Black 438.95 FOR 91-05 FXD, FXDWG (11/4” AND 11/2” CLAMPS) 1911-5007 Chrome 438.95 1911-5008 Black w/ polished fins 429.95 FOR 06-10 FXD, 09-10 FLHT, FLHR, FLHX, FLTR (11/2” CLAMPS) 0713-0068 Chrome 397.95 0713-0067 Black 397.95 FOR 00-09 FXST, FLST (11/4” CLAMPS) 1911-5003 Chrome 438.95 1911-5004 Black w/ polished fins 438.95 1911-5005 Black 438.95 1 FOR 84-99 FXST, FLST, FLHR/I, FLT/I, FLHR/I (1 /8” CLAMPS) 1911-5000 Chrome 438.95 1911-5001 Black w/ polished fins 438.95 1911-5002 Black 438.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

BLACK OIL COOLER HOSE KIT •Includes 3’ of Russell Pro Classic black cloth braided hose and four Russell black anodized compression hose fittings •A clean, no clamp installation on smooth barb oil cooler and filter adapters is provided by the fittings •Gives you the perfect finishing touch to a durable cooler installation •Made in the U.S.A. PART # 0711-0156

DESCRIPTION Oil cooler hose kit

SUG. RETAIL $92.95

OIL COOLER COVER •Quality black vinyl cover features hook-and-loop fasteners for easy installation and removal •Keeps oil at the correct operating temperature when riding in cool weather •Designed for use on OEM and Jagg Slimline oil cooler •8” L x 21/4” W x 11/4” D •Made in the U.S.A. PART # 3511-0001

DESCRIPTION Oil cooler cover

TANKS & OIL FILTERS DASHES & GAUGES

SUG. RETAIL $13.95

DS-06226

UNIVERSAL FUEL/OIL LINE

FUEL/OIL LINE •Reinforced, synthetic rubber, smooth-bore line is fuel- and oil-resistant •Made in the U.S.A. PART # DS-06226 DS-05226 DS-04226

DESCRIPTION 3/8” x 25’ roll 5/16” x 25’ roll 1/4” x 25’ roll

•Universal, black fuel/oil line in 25’ rolls •Reinforced line is fuel- and oil-resistant SUG. RETAIL $37.95 34.95 33.95

PART # 0711-0060 0711-0061 0711-0062

DESCRIPTION 1/4” x 25’ 5/16” x 25’ 3/8” x 25’

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $23.95 26.95 34.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

899

SECTION

15 JPS BLUE POLYURETHANE

WINDSHIELDS FUEL LINE TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

•High-quality, transparent blue polyurethane line designed for demanding uses •Strong, tough, kink- and abrasion-resistant, yet flexible and easily processed in assembly operations •Exceptional chemical resistance including gasoline, grease and oil •High tensile strength; withstands temperatures from -65°F to 220°F without deterioration •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL PART # 1/8” i.d. x 25’ $6.95 1509 1508-100 3/16” i.d. x 25’ 1507 1510 11.95 3/16” i.d. x 100’ 1507-100 1510-100 44.95 1/4” i.d. x 25’ 1508 14.95

SUG. RETAIL $56.95 17.95 73.95

BLUE POLYURETHANE FUEL LINE •High-quality, kink- and abrasion-resistant, transparent blue polyurethane line with exceptional chemical resistance including gasoline, grease and oil •Strong, yet flexible and easily processed in assembly operations •High tensile strength; withstands temperatures from -65°F to 220°F without deterioration PART # 0706-0103 0706-0108 0706-0104 0706-0109 0706-0105

DESCRIPTION i.d. x 25’ 1/16” i.d. x 100’ 1/8” i.d. x 25’ 1/8” i.d. x 100’ 3/16” i.d. x 25’ 1/16”

SUG. RETAIL $4.95 13.95 6.95 23.95 12.95

PART # 0706-0110 0706-0106 0706-0111 0706-0107 0706-0112

DESCRIPTION i.d. x 100’ 1/4” i.d. x 25’ 1/4” i.d. x 100’ 5/16” i.d. x 25’ 5/16” i.d. x 100’ 3/16”

SUG. RETAIL $54.95 14.95 56.95 19.95 78.95

FUEL AND CARBURETOR VENT LINE •High-quality polyurethane construction – will not harden or crack •Fuel line available in 1/4”, 3/16”, and 5/16” i.d.; carburetor vent line available in 1/8” i.d.

•Choice of clear or black •Fuel line available in 3’ lengths •Carb vent line comes in 5’ lengths •Made in the U.S.A. PART # DESCRIPTION FUEL LINE, 3’ 1/4”, clear M6219 1/4”, black M62191 3/16”, clear M6209 3/16”, black M62091 5/16”, clear 0706-0113 5/16”, black 0706-0114 CARB VENT LINE, 5’ 1/8”, clear M6109 1/8”, black M61091

SUG. RETAIL

PART # DESCRIPTION 1/4” I.D. X 7/16” O.D. – 25’ ROLLS MP12-032 Gray 0706-0022 Clear 0706-0019 Black 5/16” X 1/2” O.D. – 25’ ROLLS MP12-033 Gray 0706-0023 Clear 0706-0020 Black

SUG. RETAIL

$6.95 6.95 6.95 6.95 6.95 6.95 8.95 8.95

PREMIUM FUEL LINE •Stronger and more durable than vinyl fuel line •Use with any type of gasoline •Resists swelling and hardening •Resistant to direct sunlight, hardening and/ or cracking •Flexible in temperatures from -35F to +165°F •Fuel line stretches easily over fittings or petcocks •Sold in 3’ lengths and 25’ rolls NOTE: Not for use with fuel-injected models.

PART # DESCRIPTION 3/16” I.D. X 5/16” O.D. – 3’ LENGTHS 0706-0038 Gray 0706-0041 Clear 0706-0044 Black 1/4” I.D. X 7/16” O.D. – 3’ LENGTHS 0706-0039 Gray 0706-0042 Clear 0706-0045 Black

SUG. RETAIL $8.95 8.95 8.95 12.95 12.95 12.95

PART # DESCRIPTION 5/16” X 1/2” O.D. – 3’ LENGTHS 0706-0040 Gray 0706-0043 Clear 0706-0046 Black 3/16” I.D. X 5/16” O.D. – 25’ ROLLS MP12-031 Gray 0706-0021 Clear 0706-0018 Black

SUG. RETAIL $14.95 14.95 14.95 50.95 50.95 50.95

$79.95 83.95 83.95 87.95 91.95 91.95

0706-0087

LP (LOW PERMEATION) PREMIUM FUEL LINE •Meets the 2008 C.A.R.B. and EPA fuel line permeation standards for motorcycles, ATV, snowmobiles, PWC and small engines •Flexible and kink-resistant •Gray color

FRAMES, PART # SUSPENSION 0706-0087 & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS BRAIDED STAINLESS & TOOLS AND COPPER HOSES •25’ rolls of braided stainless steel or braided COVERS, copper hoses for various OEM and SECURITY custom applications & GENERAL •Made in the U.S.A.

900

DESCRIPTION i.d. x 100’ 5/16” i.d. x 25’ 5/16” i.d. x 100’ 1/4”

DESCRIPTION i.d. x 3’ L

1/4”

SUG. RETAIL $12.95

PART # 0706-0088

DESCRIPTION i.d. x 3’ L

5/16”

SUG. RETAIL $14.95

Stainless Copper PART # DESCRIPTION BRAIDED STAINLESS STEEL HOSE 1 0711-0104 /4” i.d.

5/16” i.d.

0711-0105 3/8” i.d.

0711-0106

SUG. RETAIL $121.95 123.95 125.95

PART # DESCRIPTION BRAIDED COPPER HOSE 1 0711-0107 /4” i.d.

5/16” i.d.

0711-0108 3/8” i.d.

0711-0109

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $101.95 103.95 106.95

SECTION

15

WINDSHIELDS TOURING LUGGAGE

DS-096612

•Hose features a black nylon braided covering •Suitable for either gas or oil applications •Available in various sizes and lengths

•Available in 3’, 6’, or 25’ lengths, stainless steel braided hoses can be used for any oil and gas applications •Available in natural/silver color PART # DS-096605 DS-096615 DS-096612 DS-096606 DS-096616

DESCRIPTION 1/4” x 3’ 1/4” x 6’ 1/4” x 25’ 5/16” x 3’ 5/16” x 6’

SEATS & SISSY BARS

BLACK BRAIDED HOSE

STAINLESS STEEL BRAIDED HOSE

SUG. RETAIL $18.95 34.95 139.95 21.95 39.95

PART # DS-096613 DS-096607 DS-096617 DS-096614

DESCRIPTION 5/16” x 25’ 3/8” x 3’ 3/8” x 6’ 3/8” x 25’

SUG. RETAIL $167.95 22.95 44.95 167.95

PART # DS-096671 DS-096672 DS-096673 DS-096676

DESCRIPTION 1/4” x 6’ 5/16” x 6’ 3/8” x 6’ 3/8” x 25’

EXHAUST SUG. RETAIL $31.95 32.95 34.95 148.95

PART # DS-096677

DESCRIPTION 1/2” x 3’ (For oil tank drains)

SUG. RETAIL

$26.95

ENGINE TRANSMISSION & DRIVELINE

BRAIDED HOSE •Braided hose is neoprene lined •Can be used as fuel line or oil line •For use with Goodridge hose finishers •Available in stainless or black finish •Made in the U.S.A. SUG. PART # DESCRIPTION RETAIL 1/4” HOSE 0711-0090 6’, stainless $44.95 0711-0091 10’, stainless 67.95 5/16” HOSE 0711-0093 6’, stainless 44.95

FUEL/AIR SYSTEMS

0711-0097

(sold separately)

PART # DESCRIPTION 5/16” HOSE (CONT) 0711-0094 10’, stainless 0711-0095 25’, stainless 3/8” HOSE 0711-0096 6’, stainless

SUG. RETAIL $74.95 176.95 45.95

PART # DESCRIPTION 3/8” HOSE (CONT) 0711-0159 6’, black 0711-0097 10’, stainless 0711-0160 12’, black 0711-0098 25’, stainless

SUG. RETAIL

GASKETS & SEALS 0711-0159

$91.95 76.95 172.95 180.95

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

STERLING CHROMITE® BRAIDED FUEL/OIL LINE

0711-0087

0711-0026

STERLING CHROMITE® II BRAIDED FUEL/OIL LINE •Only Sterling Chromite II uses patented technology to create an exclusive braid that looks like chrome •Perfectly matches color and weave of Magnum Sterling Chromite II cables and lines •Sterling Chromite II has a high-quality clear covering that won’t discolor and makes cleaning easy •Contains premium quality hose with a tough polyester inner reinforcement braid for high burst strength •Each builders value pack contains short pre-cut hoses in lengths most needed for basic construction of oil or fuel lines at a cost savings •PART # 0711-0087 include three pieces of 15”, 18” and 24” •PART # 0711-0089 includes four pieces of 15”, three pieces of 18”, two pieces of 24” and one piece of 30” •Builders value packs provide hose for multiple bike builds •Trims easily with scissors •Made in the U.S.A. NOTE: Magnum connectors must be used with Magnum braided line.

BUILDERS VALUE PACK PART # SIZE SUG. RETAIL 1/4” $131.95 0711-0087

PART # 0711-0089

SIZE 3/8”

SUG. RETAIL $158.95

BRAIDED FUEL/OIL LINE PART # SIZE SUG. RETAIL $76.95 0711-0026 1/4” x 6’

PART # SIZE 0711-0028 3/8” x 6’

SUG. RETAIL $81.95

•Only Sterling Chromite uses the patented technology to create an exclusive braid that looks like chrome •Has identical high-quality features of Sterling Chromite fuel and oil line without the clear covering •Premium quality hose uses a tough polyester inner reinforcement braid for high-burst strength •Cuts easily with scissors •Bright Candy Apple Red color •Made in the U.S.A. PART # NOTE: Magnum connectors must be used with Magnum braided line. 0711-0018

CABLES BRAKES TANKS & OIL FILTERS DESCRIPTION 1/4’’ x 6’

SUG. RETAIL $54.95

1902-0031 1902-0033

HOSE PROTECTORS •Protect vulnerable and exposed hoses and lines •Approximately 10” long; can be stretched or compressed to custom fit your application •Made from stainless spring steel •Available in several sizes •Sold each •Made in the U.S.A. PART # 1902-0033 1902-0032 1902-0031 1902-0030

DESCRIPTION 9mm i.d. (fits 1/4” fuel line) 11mm i.d. (fits 7/16” o.d. fuel line) 25mm i.d. (fits 1” o.d. radiator hose) 38mm i.d. (fits 11/2” o.d. radiator hose)

All part numbers in BOLD MAGENTA are new for 2010.

SUG. RETAIL $9.95 9.95 10.95 10.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

901

SECTION

15 POLISHED CHROME HOSE CONNECTORS

WINDSHIELDS

•Smooth, polished style •Puts a finishing touch on any hose installation •Includes stainless steel worm-gear clamps •Very affordably priced

TOURING GROOVED CHROME HOSE ENDS WITH CLAMPS

LUGGAGE

•Grooved hose end clamps give a finished look to rubber or braided oil/gas lines •Sold to dealers in 6-pack

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING

PART # DESCRIPTION DS-096608 5/16”, 3/8” hose ends DS-096609 1/4” hose ends

SUG. RETAIL $4.95 (ea.)

4.95 (ea.)

BRAKES

NOTE: Magnum connectors must be used with Magnum braided line.

PART # DS-096601 DS-096598 DS-096600 DS-096599

DESCRIPTION For 1/4”, 5/16” hose ends (2-pk.)

For 1/4”, 5/16” hose ends (6-pk.)

For 3/8” hose ends (2-pk.)

For 3/8” hose ends (6-pk.)

COLORED HOSE CLAMPS •Custom colored hose clamps designed for use with braided copper and stainless steel hoses and fit over most manufacturer’s braided rubber hoses •Extruded from brass and finished with a matte metallic powder-coat •Sold in packs of six – an average FXST or custom bike will use a minimum of six oil line clamps and two fuel line clamps •Made in the U.S.A. SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL FOR 1/4” AND 5/16” FUEL LINE FOR 1/4” AND 5/16” FUEL LINE (CONT) 0706-0047 Black $36.95 0706-0051 Silver $36.95 0706-0049 Copper 43.95 0706-0053 Brass 36.95

PART # DESCRIPTION FOR 3/8” OIL LINE 0706-0048 Black 0706-0050 Copper

STAINLESS STEEL MINI-CLAMPS

FINISHERS

•Designed for use on oil and gas lines up to 3/8” in diameter •Made in the U.S.A.; sold in packs of ten PART # DS-2152

DESCRIPTION Mini hose clamps

SUG. RETAIL $1.25 (ea.)

HANDLEBARS, WIRE CLAMPS CONTROLS •Self-tensioning wire hose & MIRRORS clamps for fuel or vacuum lines CABLES

DS-096598

•Quality plated steel for long-lasting durability and function •15-piece assortment pack offers 5 each of 1/4”, 5/16” and 7/16” i.d. clamps PART # DESCRIPTION •150-piece assortment pack offers M30040 15-pc.

50 of each size M30041 150-pc.

•Made in the U.S.A.

SUG.

Silver

Black

Brass Copper SUG. RETAIL $36.95 43.95

•Available in chrome-plated or black steel, or red or blue anodized aluminum •Made in the U.K. SUG. PART # DESCRIPTION RETAIL $4.95 936-04DB 1/4” blue 936-04DCH 1/4” chrome 4.95 936-07DB 5/16” , 3/8” blue 4.95

5/16”

RETAIL $7.95 23.95

SUG. RETAIL $16.95 34.95 16.95 34.95

PART # DESCRIPTION FOR 3/8” OIL LINE (CONT) 0706-0052 Silver 0706-0054 Brass

PART # 936-07DCH 936-07DR 0711-0161

SUG. RETAIL $36.95 36.95

SUG. DESCRIPTION RETAIL 5/16”, 3/8” chrome $4.95 5/16”, 3/8” red 4.95 5/16”, 3/8” black 6.95

- 3/8” HOSE CLAMPS

•Stainless steel with a black finish •Sold in 10-pk.

PART # 0713-0055

DESCRIPTION Universal hose clamps

SUG. RETAIL $12.95

TANKS & OIL FILTERS DASHES & GAUGES

MP12-034

FRAMES, OIL AND FUEL LINE CLAMP/SPLICE KIT SUSPENSION •Heavy-duty forged crimping tool can be used from & FENDERS end or side and works in tight places •Includes the following: 30 each of 1/4”, 5/16” and 3/8” i.d.

FUEL LINE FITTINGS KIT hose on FOOTRESTS hose clamps; one 1/2” i.d. clamp for oil1 drain •Contains the parts needed to service any fuel line routing model bikes; five each of special /4”, 5/16” and ten & LICENSE 3late •Includes 40 assorted O-clips, 40 assorted Y-connectors, /8” stainless steel splice connectors DS-390302 PLATE FRAMES •1/4”, 3/8” and 1/2” clamps are conventional one-ear style 40 assorted T-connectors, hose clamps and an 1/4”, 5/16” and 3/8” clamps are Stepless style for a full 360° closure O-clip pincher tool TIRES, •around •O-clip pincher tool and O-clips also available separately hose with no gaps SUG. TUBES & •Includes convenient storage case # DESCRIPTION RETAIL •Made in the U.S.A. WHEELS PART DS-390302 Clamp/hose splice kit w/ crimper tool (ea.) $191.95 1/4” Stepless heavy-duty clamp (100-pk.); repl. OEM #10014A PART # DESCRIPTION SUG. RETAIL .65 DS-390306 Repl.

HARDWARE, Fuel line fitting kit $226.95 .65 MP12-034 CHEMICALS DS-390307 Repl. 53/16” Stepless heavy-duty clamp (100-pk.)

5/16” O-clips for 3/16” hose (10-pk.)

6.95 DS-390308 Repl. /8” Stepless heavy-duty clamp (100-pk.); repl. OEM #10080 .65 2401-0390 & TOOLS 7/16” O-clips for 1/4” hose (10-pk.)

6.95 DS-390309 Repl. 1/4” one-ear conventional clamp (100-pk.); repl. OEM #10014 .35 2401-0095 1/2” O-clips for 5/16” hose (10-pk.)

7.95 .35 2401-0096 COVERS, DS-390310 Repl. 3/8” one-ear conventional clamp (100-pk.); repl. OEM #10020A 9/16” O-clips for 3/8” hose (10-pk.)

7.95 .45 2401-0391 SECURITY DS-390311 Repl. 1/2” one-ear conventional clamp (100-pk.); repl. OEM #10086 O-clip pincher tool 18.95 49.95 3801-0034 & GENERAL DS-390312 Side- or end-type clamp crimper tool (ea.) ®

®

®

®

902

All part numbers in BOLD MAGENTA are new for 2010.