september 2010
REVOLUTION PERFORMANCE
“YOU CAN’T OUTRUN THE PHYSICS.” Aerospace-grade, all-aluminum cylinders with nickel-silicone-carbide electroplated bores, that means NO SLEEVING, allow for larger bore sizes and less friction to provide more horsepower, lower temps and longer life. The cylinders are offered as kits, so riders looking for premium performance only need to order ONE PART # to be out-running all of their competition.
0903-0785
0903-0780 0903-0784
0903-0781
MONSTER BIG BORE KITS
•Monster power in a package that’s tested, reliable and, most importantly, really big •Full 4.250” bore is achieved using Revolution™ aerospace-grade, all-aluminum cylinders and nickel-silicon-carbide electroplating •Includes Wiseco forged pistons with rings (that are specifically designed for optimal compatibility with Revolution Performance’s cylinders), wrist pins, circlips and high-performance head and base gaskets •Available in two finishes: natural silver or black with highlighted fins •Replacement head and base gasket sets available separately; see 2010 FatBook •Made in the U.S.A. NOTE: All kits require case-boring.
PART # DESCRIPTION SUG. RETAIL 124” KITS FOR 07-10 TWIN CAM AND 99-05 TWIN CAM WITH SCREAMIN’ EAGLE STROKER CRANK (4.250” BORE CYLINDERS; 10.5:1 FLAT-TOP PISTONS)
0903-07851 0903-07861
Silver Black
$1,099.95 1,099.95
0903-0783 0903-0784
Silver Black
1,099.95 1,099.95
114” KITS FOR 99-06 TWIN CAM (4.250” BORE CYLINDERS; 10.5:1 FLAT-TOP PISTONS) 107” KITS FOR 99-06 TWIN CAM (3.938” BORE CYLINDERS; 10.5:1 FLAT-TOP PISTONS) 0903-0807 0903-0808 1 Requires
Silver Black
use of big bore carb or throttle body.
1,099.95 1,099.95
BOLT-ON BIG BORE KITS
•True bolt-on kit that delivers major power with no machine work required •Features Revolution™ aerospace-grade all-aluminum cylinders with nickel-silicon-carbide electroplated bores; provides a more oleophilic surface and higher wear resistance •Also includes Wiseco forged pistons with rings (that are specifically designed for optimal compatibility with Revolution Performance’s cylinders), wrist pins, circlips and high-performance head and base gaskets •Available in two finishes: natural silver or black with highlighted fins •Replacement head and base gasket sets available separately; see page 395 of the 2010 FatBook •Made in the U.S.A.
PART # DESCRIPTION 85” KIT FOR 84-99 EVO BIG TWIN (3.563” BORE CYLINDERS; 10.5:1 DOMED PISTONS)
SUG. RETAIL
0903-0780
Black
$999.95
0903-0781 0903-0782
Silver Black
999.95 999.95
1250CC KITS FOR 04-10 XL 883/1200 (3.563” BORE CYLINDERS; 10.3:1 FLAT-TOP PISTONS)
LYNDALL RACING BRAKES
Paul Kittrell, who founded Lyndall Racing Brakes back in 1998, is one of the most “hands-on” guys you will ever meet. He used his background in race car brakes to begin cutting his own pads from those same materials to use for his first love: motorcycle racing. Perfected on the racetrack, “The Future of Motorcycle Brakes” is now available to all V-Twin owners. Your customers will STOP back in to thank you.
1710-0593A
1710-0586
1710-0595 1710-0588
1710-0593
LUG-DRIVE BRAKE ROTORS
•Friction ring is CNC-machined from 420 high-carbon steel and fits flush with the CNC-machined 6061 T-6 billet aluminum carrier for the clean, uninterrupted look of a solid rotor with the performance of LRB’s line of full-floating, high-performance rotors •Available with chrome-plated or black anodized carrier •For best results, use Lyndall Racing brake pads; see pages 833-834 of the 2010 FatBook for applications •Sold each 1710-0590 •Made in the U.S.A.
OMEGA OMEGA GEMINI GEMINI DESCRIPTION CHROME BLACK CHROME BLACK FOR 00-10 MODELS (EXCEPT 08-10 DRESSERS, V-ROD, SPRINGERS, 06-10 DYNA GLIDE FRONT)
1710-0597
TRIANGULUM CHROME
TRIANGULUM BLACK
SUG. RETAIL
11.5” rotor, front 11.5” rotor, rear
1710-0586 1710-0592
1710-0587 1710-0593
1710-0588 1710-0594
1710-0589 1710-0595
1710-0590 1710-0596
1710-0591 1710-0597
$369.95 369.95
11.8” rotor, front 11.8” rotor, rear
1710-0598 1710-0604
1710-0599 1710-0605
1710-0600 1710-0606
1710-0601 1710-0607
1710-0602 1710-0608
1710-0603 1710-0609
369.95 369.95
FOR 08-10 FLHT, FLHR, FLHX, FLTR MODELS, 09-10 FL TRIKE MODELS (FRONT ONLY), 06-10 DYNA MODELS (FRONT ONLY)
FORGED ALUMINUM HANDLEBAR RISERS
0602-0398 0602-0407 0602-0399 •These risers are forged from 6061 T-6 aluminum for superior strength 0602-0401 •Drilled and tapped for 1/2”-13 riser bolts (bolts sold separately) •CNC-machined for precision fit on handlebars with a 1” diameter clamping area •Designed to fit applications with 3.5” on-center mounts and will accept most OEM-style top clamps •Available in chrome or black finish •Sold in pairs
STRAIGHT RISERS PART # CHROME
0602-0398 0602-0399 0602-0400 0602-0401 0602-0402
2
0602-0416
0602-0417
PULLBACK RISERS (1” PULLBACK)
SUG. DESCRIPTION RETAIL 1.7” 3.5” 5.5” 6.5” 8”
0602-0409
0602-0408
$34.95 39.95 49.95 54.95 64.95
PART # BLACK
0602-0403 0602-0404 0602-0405 0602-0406 0602-0407
SUG. DESCRIPTION RETAIL 1.7” 3.5” 5.5” 6.5” 8”
$34.95 39.95 49.95 54.95 64.95
PART # CHROME
0602-0408 0602-0409 0602-0410 0602-0411 0602-0412
SUG. DESCRIPTION RETAIL 3.5” 4.5” 5.5” 6.5” 8.5”
$39.95 44.95 49.95 54.95 64.95
PART # BLACK
0602-0413 0602-0414 0602-0415 0602-0416 0602-0417
SUG. DESCRIPTION RETAIL 3.5” 4.5” 5.5” 6.5” 8.5”
$39.95 44.95 49.95 54.95 64.95
1861-0616
1861-0617
BLACK HEATSHIELDS FOR PRO PIPE HI-OUTPUT
•Heatshields help cut down on heat coming off of pipes, yet retain the great looks of the exhaust •Feature black ceramic coat finish, 21/2” diameter and 220° coverage over both stepped headers all the way down to the collector
PART #
DESCRIPTION
1861-0613
Heat shields for PART #s 1800-1213, 1800-1018 and 1800-1130
SUG. RETAIL $169.95
PART #
DESCRIPTION
1861-0616 1861-0617
Heat shields for PART #1800-1016 Heat shields for PART #1800-1021
SUG. RETAIL $169.95 169.95
1610-0197
CONTOUR REAR BRAKE PEDALS
•Machined aluminum construction with black finish •Matching floorboards available •Made in the U.S.A.
PART #
DESCRIPTION
1610-0198 1610-0197
For 08-10 FLHT/FLHR/FLHX/FLTR/FL Trike For 97-07 FLT/FLHT/FLHR/FLTR 1602-0403
1621-0248
CONTOUR FLOORBOARDS
1621-0249
PART # DESCRIPTION FOR 84-10 FLT/FLHT/FL TRIKE, 86-10 FLST 1621-0248
Driver floorboards
1621-0249
Passenger floorboards
FOR 87-10 FLT, FLST, FL TRIKE
SUG. RETAIL $369.95
CONTOUR SHIFT LEVER AND SPACER
349.95
PART # DESCRIPTION FOR 84-10 FLHT/FLHR/FLHX/FL TRIKE, 00-10 FLST 1602-0403 1602-0404 1602-0405
$149.95 149.95 1602-0404
•Machined aluminum construction with a chrome or black finish •Toe shifter includes an aluminum spacer to properly space shifter •Made in the U.S.A.
•Machined aluminum body with billet hinges and black finish •Foot-cushioning rubber pad •Sold in pairs •Made in the U.S.A.
SUG. RETAIL
Toe shifter, black Heel/toe shifter, black Heel/toe shifter, chrome
1602-0405
SUG. RETAIL $89.95 179.95 179.95
3
CARL BROUHARD DESIGNS
The custom Board Tracker pictured here with Carl Brouhard belongs to Pro Mod car racer Mike Maggio. This is Carl’s 4th collaborative effort with Mike and it recently appeared on the cover of American Cycle Magazine. While not meant to be a secret, the Brouhard name is one you can still introduce your customers to as some of newest and freshest designs rolling. Stuff they won’t see on the next hundred bikes they pass!
DERBY COVER
•High-quality covers that scream “custom” •Constructed of 6061 T-6 aluminum •Available in Waterfall style with a blackanodized finish with re-machined accents •Made in the U.S.A.
SADDLEBAG LATCH COVERS
•Constructed of 6061 T-6 aluminum •Available in a black-anodized Waterfall design with re-machined accents •Easy installation •Sold in pairs •Made in the U.S.A.
PART #
DESCRIPTION
3501-0609
For 93-10 FLT, FLHT, FLHX, FLTR, FLHR w/ hard bags (except Police models) 0703-0282
FUEL DOORS
SUG. RETAIL $248.95
0703-0318
•High-quality fuel doors offer a head-turning custom look •Constructed of 6061 T-6 aluminum •Available in two distinct styles with either chrome or re-machined black-anodized finish •Easy installation •Made in the U.S.A.
PART # DESCRIPTION FOR 08-10 FLHT, FLHX, FLTR, FL TRIKE
NOTE: 06 Dyna Glide and all 07-10 applications will require the use of gasket PART #s 0934-0289 or 0934-0788 (see 2010 FatBook).
PART #
DESCRIPTION
1107-0186
For 99-10 Big Twin (5-hole)
Lefty series, chrome Waterfall series, black w/ re-machined accents
$122.95 134.95
0703-0283 0703-0319
Lefty series, black Waterfall series, black w/ re-machined accents
122.95 134.95
FOR 92-07 FLT, FLHT
AIR CLEANER INSERT
•High-quality insert for a sleek, custom look •Constructed of 6061 T-6 aluminum •Waterfall design; available in a black-anodized finish with re-machined accents •Easy installation •Made in the U.S.A.
PART #
DESCRIPTION
1014-0075
For 99-10 Twin Cam w/ stock air cleaner cover (except 08-10 Dyna)
1610-0193
$105.95
1610-0194
PART # DESCRIPTION FOR 86-10 FLT, FLHT, FL TRIKE, 87-10 FLST MODELS
SUG. RETAIL
•Replaces the stock rubber pad for an instant custom upgrade •Constructed of 6061 T-6 billet aluminum with a chrome or black-anodized finish; black-anodized finish features re-machined accents •A perfect complement to the CBD Elite floorboards •Made in the U.S.A.
Chrome Black
$99.95 99.95
1731-0211
•Superior quality and style over stock •Constructed of 6061 T-6 aluminum •Easy installation •Available in a black-anodized Waterfall design with re-machined accents •Made in the U.S.A.
PART #
DESCRIPTION
1731-0210 1731-0211
For 08-10 FLHT, FLHX, FLHR, FLTR (except FL Trike) For 99-10 Big Twin (except 08-10 Dresser)
4
SUG. RETAIL
BRAKE PEDAL COVERS
1610-0193 1610-0194
REAR MASTER CYLINDER COVERS
$144.95
SUG. RETAIL
0703-0282 0703-0318
1731-0210
SUG. RETAIL
SUG. RETAIL $85.95 85.95
POINTS COVER
•Constructed of 6061 T-6 aluminum •Easy installation •Available in Waterfall style with a blackanodized finish with re-machined accents •Made in the U.S.A.
PART #
DESCRIPTION
0940-0956
For 99-10 Twin Cam
SUG. RETAIL $79.95
GASKET, SEAL AND O-RING DISPLAY FOR BIG TWIN 6-SPEED TRANSMISSIONS/PRIMARIES
•Complete four-color display features gaskets, seals and O-rings necessary to rebuild most OEM 6-speed Big Twin transmissions and primaries •Displays are 20 mil flexible vinyl and come with all necessary hooks and clamshells •Mounts easily on any 1/8” or 1/4” pegboard •Designed so three 48” W x 32” H displays fit on a single sheet of 4’ x 8’ pegboard •Gaskets, seals and O-rings are not included; a list is furnished to allow you to stock the products that you require •Made in the U.S.A. NOTE: GASKETS NOT INCLUDED. TO STOCK YOUR BOARD FOR INITIAL SET-UP AT TIME OF ORDER, THE FOLLOWING JAMES GASKETS ARE REQUIRED. SEE WWW.DRAGNETWEB.COM OR YOUR DEALER PRICE LIST FOR PRICING.
FOR 06-10 BIG TWIN 6-SPEED TRANSMISSIONS/primaries PART #
DESCRIPTION
0934-2017
Gasket, seal and O-ring display
SUG. RETAIL $84.95
JAMES/OEM PART #
DRAG PART #
QTY.
JAMES/OEM PART #
DRAG PART #
QTY.
11105 11120 11132A 11179 11191 11201 11289A 11290 11573 12052A 12074 12077 17369-06
DS-174334 0935-0114 0935-0115 DS-174369 DS-174374 0935-0117 DS-173206 DS-173207 0935-0120 0935-0121 0935-0123 0935-0125 N/A
25-pk. 10-pk. 10-pk. 25-pk. 25-pk. 10-pk. 10-pk. 10-pk. 10-pk. 5-pk. ea. ea. -
25416-06X 26072-99A 26077-99A 34901-07 34917-06 34934-06 35607-06 35654-06 36805-06 37101-84B 60547-06 63869-06
0934-1607 0934-1555 DS-173231 0934-1622 0934-1189 0934-1883 0935-0128 0934-1192 0934-1194 0935-0372 0934-1196 0934-1197
5-pk. 6-pk. 10-pk. 5-pk. ea. ea. ea. ea. ea. 5-pk. 5-pk. 5-pk.
5
GASKET, SEAL AND O-RING DISPLAY FOR TWIN CAM 96 MOTOR/TRANSMISSION/PRIMARY
•Vinyl display comes with necessary hooks to display all the gaskets, seals and O-rings necessary to rebuild an OEM 96” Twin Cam motor and an OEM 6-speed transmission/primary •Must supply pegboard •Measures 48” x 32” •Gaskets, seals and O-rings are not included, a list is furnished to allow you to stock the product you require •Made in the U.S.A. NOTE: GASKETS NOT INCLUDED. TO STOCK YOUR BOARD FOR INITIAL SET-UP AT TIME OF ORDER, THE FOLLOWING COMETIC GASKETS ARE REQUIRED. SEE WWW. DRAGNETWEB.COM OR YOUR DEALER PRICE LIST FOR PRICING.
PART #
DESCRIPTION
9903-0313
Gasket, seal and O-ring display
SUG. RETAIL $71.95
OEM #
DRAG PART #
QTY.
OEM #
DRAG PART #
QTY.
OEM #
DRAG PART #
QTY.
11105 11105, 63783-00 11120 11132 11140 11145A 11179 11191 11201 11256 11270 11273 11289A/11140 11290 11291 11292 11293 11301
0935-0186 0935-0186 0934-0740 0935-0170 0935-0174 0935-0150 0935-0192 0934-1374 0935-0231 DS-172027 0935-0147 0935-0186 0935-0153 0934-1389 0935-0166 0935-0373 0935-0148 0935-0159
10-pk. 10-pk. 5-pk. 25-pk. 25-pk. 25-pk. 25-pk. 25-pk. 10-pk. 10-pk. 10-pk. 10-pk. 25-pk. 10-pk. 10-pk. 10-pk. 10-pk. 10-pk.
12052A, 17369-06 12068 12074 12077 16719-99A 16775-95B 17386-99 17591-99 17592-99 18046-98 18094-02A 18635-99B 25244-99A 25416-99C 26072-99A 26077-99A 26432-76A 26858-99
0935-0162 0935-0374 0935-0375 0934-1392 0934-0750 DS-172107 DS-172031 0934-1332 0934-1334 0935-0138 0935-0137 0934-1335 2011-1500 0934-0788 0934-1338 0934-1339 0935-0152 0935-0146
5-pk. 10-pk. 1-pk. 10-pk. 10-pk. 2-pk. 10-pk. 10-pk. 10-pk. 10-pk. 25-pk. 10-pk. 5-pk. 5-pk. 10-pk. 10-pk. 10-pk. 10-pk.
26995-86B 27444-00Y 29062-95 29313-95 29583-01A 34901-07 34917-06 34934-06 35607-06 35654-06 36805-06 37101-84B 45359-00 60547-06 63815-99 63869-06 65324-83A
0935-0156 0935-0155 0934-1342 0934-2018 0934-2061 0934-1340 0934-1234 0935-0241 0934-2019 0934-1232 0934-1233 0935-0376 0935-0377 0934-1341 0934-1333 0934-2020 0934-1337
10-pk. 5-pk. 10-pk. 10-pk. 10-pk. 5-pk. 10-pk. 5-pk. 5-pk. 10-pk. 10-pk. 5-pk. 10-pk. 5-pk. 10-pk. 10-pk. 10-pk.
6
BAKER DRIVETRAIN
Bert Baker along with his wife, Lisa, attend shows, rides, rallies and races where they can display and talk about their American Made drivetrain products. The Bakers’ pride in Made-In-America quality is reflected in every product they design and manufacture. Products that greatly improve upon stock and feature superior quality when compared to other aftermarket parts are what sets this company apart.
1101-0048
6-SPEED TRANSMISSION ASSEMBLIES FOR SHOVELHEAD
•Available with or without a kicker and comes with the stock external clutch throw-out arm •Mainshaft (70-E84) permits re-use of stock primary drive •Significantly smoother shifting than stock due to a roller detent shift drum with reduced inertia and gear dog teeth with lead-in ramping •Includes 23T sprocket •Available with 2.94 or 3.24 1st and .86 6th gear •Made in the U.S.A. NOTE: 1” wider than stock transmission, may require exhaust spacing.
1101-0053
NOTE: Not for rear belt drive transmissions.
PART # DESCRIPTION FOR 70-E84 SHOVELHEAD W/ KICKER
SUG. RETAIL
1101-0048 1101-0049 1101-0050
Wrinkle-black case 2.94 1st Wrinkle-black case 3.24 1st Polished case 2.94 1st
$3,537.95 3,537.95 3,723.95
1101-0051 1101-0052 1101-0053
Wrinkle-black case 2.94 1st Wrinkle-black case 3.24 1st Polished case 2.94 1st
3,351.95 3,351.95 3,537.95
FOR 70-E84 SHOVELHEAD W/O KICKER
PASSENGER FLOORBOARD COMFORT KIT
•Provides two additional floorboard positions •Approximately 11/4” to 2” higher than the highest stock setting •The tilted position places the floorboards at an ergonomic plane relieving stress in the legs and calves •This tilted position also allows the passenger to push into the boards when cornering which provides a more secure feeling •Provides two additional spacing widths to add additional comfort by placing the floorboards wider apart •The wider position allows passengers to relax their lower body which takes pressure off of the inner thighs, knees and lower back •Made in the U.S.A.
PART #
DESCRIPTION
1621-0245
For 93-09 FLT/FLHT/FLHR/FLTR models
SUG. RETAIL $89.95
LOCK-ON NUT DRIVERS
•Locks onto hex screws •Ideal for hose clamps •Perfect for hard to reach areas •The standard kit includes 1/4” and 5/16” x 10” drivers •The metric kit includes 6mm and 7mm x 10” drivers
PART #
DESCRIPTION
3850-0116 3850-0117
Standard Metric
SUG. RETAIL $42.95 42.95
7
EASY START CHAIN-DRIVE CAMS
•Start any engine regardless of displacement or compression ratio with a stock starter •Save your starter and battery; tested for 10,000 starts without running battery down •Spring-loaded lobe in cam allows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
FOR 99-06 TWIN CAM (EXCEPT 06 DYNA) 551 EZ CAMS
•Optimized for 88/95” to 106” Touring bikes with slip-on mufflers and 9.0 to 10.0:1 compression •Best bolt-in cam available for Dressers •Pulls hard from idle to 4000 rpm •Can be used with stock pushrods, springs and lifters
570 EZ CAMS
PART #
DESCRIPTION
PART #
DESCRIPTION
0925-0521
551 cams
0925-0522
570 cams
•For 88/95/103 cubic-inch engines •Compression ratios below 10:1 •High lift springs required
SUG. RETAIL $355.95
SUG. RETAIL $355.95
583 EZ CAMS
•Optimized for use as a great overall cam for Softail and Dyna, but can be used in any Big Twin •Provides strong low-end torque and horsepower that you can really feel •Strongest from 1500-5000 rpm in a Softail and Dyna application •High lift springs required
PART #
DESCRIPTION
0925-0523
583 cams
GRIND S&S 551
SUG. RETAIL $355.95
585 EZ CAMS
•Optimized for Softail and Dyna 95” to 106” with slip-on mufflers, high-flow air filter and 9.0 to 10.5:1 compression •Great results from 3000-6000 rpm •High lift springs required
PART #
DESCRIPTION
0925-0524
585 cams
OPEN
CLOSE
DURATION @ .053
VALVE LIFT
Intake Exhaust
15° 39°
20° 18°
215° 237°
.550” .550”
Intake Exhaust
20° 55°
40° 20°
240° 250°
.570” .570”
Intake
8°
15°
204°
.583”
S&S 570 S&S 583
SUG. RETAIL $355.95
GRIND OPEN S&S 583 (CONT)
625 EZ CAMS
•For 95/103/110 cubic-inch engines •Compression ratios from 10:1 to 10.75:1 •High lift springs required
PART #
DESCRIPTION
0925-0525
625 cams
SUG. RETAIL $355.95
CLOSE
DURATION @ .053
VALVE LIFT
Exhaust
60°
22°
262°
.583”
Intake Exhaust
20° 60°
45° 20°
245° 260°
.585” .585”
Intake Exhaust
20° 60°
55° 20°
255° 260°
.625” .625”
S&S 585 S&S 625
CHAIN DRIVEN CAMS
•For use with stock splined drive gears; for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART #DS-199175 be used •551 cams are bolt-in applications; all others require high-lift valve springs •Made in the U.S.A. NOTE: Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
FOR 99-06 TWIN CAM (EXCEPT 06 DYNA) 551 CAMS
570 CAMS
•Designed as bolt-in cam for stock 99-06 touring bikes •More power across the rpm range, with improved low and midrange torque •Can be used with stock pushrods, springs and lifters
PART #
DESCRIPTION
0925-0526
551C cams
583 CAMS
DESCRIPTION
0925-0528
583C cams
SUG. RETAIL $305.95
VALVE GRIND OPEN CLOSE STOCK CARBURETORS/INJECTED
SUG. RETAIL $305.95
585 CAMS
•Great overall cams for Softail and Dyna •Provides strong low-end torque and horsepower •Strongest from 1500-5000 rpm
PART #
570C cams
PART #
DESCRIPTION
PART #
DESCRIPTION
0925-0529
585C cams
0925-0530
625C cams
DURATION @ .053
VALVE LIFT
38°/34° 04°/04°
216°/216° 220°/220°
.473”/.473” .473”/.473”
Intake Exhaust
18° 39°
20° 15°
215° 237°
.550” .550”
Intake Exhaust
20° 55°
40° 20°
240° 255°
.570” .570”
8
DESCRIPTION
0925-0527
625 CAMS
-02°/02° 36°/36°
S&S 570C
PART #
•Designed for 88” to 95” engines with compression ratios from 10 to 10.5:1 and 100” and 107” engines with ratios 9.7:1 to 10.5:1
Intake Exhaust
S&S 551C
•Designed for 88” to 95” engines with compression ratios between 9:1 and 10:1
SUG. RETAIL
VALVE GRIND S&S 583C
$305.95
SUG. RETAIL $305.95
•For 95” or larger engines with compression ratios between 10.0 and 10.75:1
SUG. RETAIL $305.95
OPEN
CLOSE
DURATION @ .053
VALVE LIFT
Intake Exhaust
8° 60°
15° 22°
204° 262°
.583” .583”
Intake Exhaust
20° 60°
45° 20°
245° 260°
.585” .585”
Intake Exhaust
20° 60°
55° 20°
255° 260°
.625” .625”
S&S 585C S&S 625C
HANDLEBAR CABLE AND BRAKE LINE KITS
•Takes “cable calculation” headaches out of swapping handlebars •Kits give you the correct length stainless braided cables and brake lines you need so you can complete a handlebar swap, install the new cables/brake lines and ride •Throttle-by-wire (TBW) kits include clutch cable, brake lines, chrome “T” brake line junction, fittings, banjo bolts and copper crush washers •Standard (cable throttle) kits include throttle cable, idle cable, clutch cable, brake lines, chrome “T” brake line junction, banjo bolts, fittings and copper crush washers •Made in the U.S.A.
0610-0284
0610-0296
THROTTLE-BY-WIRE (TBW) KITS
STANDARD KITS
PART # DESCRIPTION FOR 08-10 FLHT/FLHR/FLTR/FLHX (W/O ABS) 0610-0284 0610-0285
SUG. RETAIL
For use w/ OEM handlebars For use w/ Beach bars, extra wide or extra-wide w/ pullback handlebars For use w/ Mini Ape Hangers For use w/ 12” - 14” Ape Hangers For use w/ 15” - 17” Ape Hangers For use w/ 18” - 20” Ape Hangers
0610-0286 0610-0287 0610-0288 0610-0289
$259.95 259.95 259.95 259.95 259.95 259.95
PART # DESCRIPTION FOR 96-07 FLHTC/CU, 06-07 FLHX 0610-0290 0610-0291
0610-0292 0610-0293 0610-0294 0610-0295
FOR 96-07 FLHR 0610-0296 0610-0297
0610-0298 0610-0299 0610-0300 0610-0301
SUG. RETAIL
For use w/ OEM handlebars For use w/ Beach bars, extra wide or extra-wide w/ pullback handlebars For use w/ Mini Ape Hangers For use w/ 12” - 14” Ape Hangers For use w/ 15” - 17” Ape Hangers For use w/ 18” - 20” Ape Hangers
$409.95
For use w/ OEM handlebars For use w/ Beach bars, extra wide or extra-wide w/ pullback handlebars For use w/ Mini Ape Hangers For use w/ 12” - 14” Ape Hangers For use w/ 15” - 17” Ape Hangers For use w/ 18” - 20” Ape Hangers
409.95
409.95 409.95 409.95 409.95 409.95
409.95 409.95 409.95 409.95 409.95
DEUTSCH PLUG AND RECEPTACLE KIT •Used to replace the male and female connectors that are found on the regulator •Designed to save time and labor •Kit includes 1-piston plug, receptacle and PART # one male and one female crimp terminal 2120-0313
DESCRIPTION
SUG. RETAIL
For all 94-03 XL models
2120-0350
$24.95
2120-0312 2120-0311
2120-0310 2120-0351
MATE-N-LOCK CAP AND PLUG CONNECTORS DEUTSCH PLUG AND RECEPTACLE KITS
2120-0309 •PART #2120-0310 is used on the harness side of fuel-injected models at the fuel pump •PART #2120-0311 is used on the fuel pump side of fuel-injected models at the fuel pump •PART #2120-0312 is used on the harness side of Big Twin models at the speedometer •Hole plugs are used when a wire/terminal is not present in order to keep connector watertight
PART # PLUG KITS
DESCRIPTION
2120-0310 Includes 3-position plug, three stamped crimp terminals and wedge lock 2120-0312 Includes 12-position plug, 12 stamped crimp terminals and wedge lock
RECEPTACLE KIT
2120-0311 Includes 3-position receptacle, three stamped crimp terminals and wedge lock
HOLE PLUGS
2120-0309 For all Deutsch DTM series plugs and receptacles (10-pk.)
SUG. RETAIL $4.95 22.95
•Namz introduces the new AMP Mate-n-Lock 15-position male and female connectors with wire and interface seals •Mate-N-Lock connectors feature a water-tight male/female design •Used on all Thunderheart control modules and factory built motorcycles from Big Dog, American Ironhorse, Indian and more •Come packaged with the necessary wire and interface seal •Made in the U.S.A.
6.95
PART #
DESCRIPTION
5.95
2120-0350 2120-0351
Cap connector (5-pk.) Plug connector (5-pk.)
SUG. RETAIL $9.95 (ea.) 9.95 (ea.)
9
0801-0564 0801-0565
0801-0566
SUPER TOURING SEAT WITH DRIVER BACKREST
0801-0567
•Super comfortable touring design provides rider and passenger with the fullest, most comfortable seat possible •Seat moves driver back 1.75” further than stock •Seat is also lower (approximately .5”) than stock so rider can plant his feet on ground •Expanded vinyl cover •Made in the U.S.A. NOTE: Will fit with a handrail.
PART # DESCRIPTION FOR 08-10 FLHT, FLTR, FLHX, FLHR
0801-0564 0801-0565 0801-0571 0801-0572 0801-0566 0801-0567
10
Vintage touring seat, (19” W front, 14” W rear) Regal touring seat, (19” W front, 14” W rear) Regal chrome studded touring seat, (19”W front, 14” W rear) Regal black studded touring seat, (19”W front, 14” W rear) Smooth chrome studded touring seat, (19” W front, 14” W rear) Smooth black studded touring seat, (19” W front, 14” W rear)
SUG. RETAIL $699.95 709.95 729.95 729.95 719.95 719.95
0801-0555
0805-0036
DS-905562 0801-0557 0801-0556
0801-0573
SUPER SOLO SEATS WITH REMOVABLE BACKREST
•Super comfortable 17” wide solo sits the driver 1.25” further back than stock seat •Seat is also lower (approximately .5”) than stock so the rider can plant his feet on ground •Fully adjustable, easily removable driver backrest provides unsurpassed comfort •Backrest has four height adjustments from 13.5” to 15.5” above seat bucket, and measures 7” high by 12” wide •Expanded vinyl cover •Optional wide rear seats offer maximum cushion •Made in the U.S.A. NOTE: Will not fit with handrail
PART # DESCRIPTION FOR 08-10 FLHT, FLHR, FLTR, FLHX
0801-0555 0805-0036 0801-0556
SUG. RETAIL
Vintage solo seat, (17” W) Vintage rear seat, (13.5” W) Chrome studded solo seat, (17” W)
$519.95 198.95 539.95
PART # DESCRIPTION FOR 08-10 FLHT, FLHR, FLTR, FLHX (CONT)
0801-0573 0801-0557 DS-905562
Chrome studded rear seat, (13.5” W) Black studded solo seat, (17” W) Black studded rear seat, (13.5”)
SUG. RETAIL $208.95 539.95 208.95
0801-0547
0805-0036 DS-905562 0801-0549 0801-0548
SUPER WIDE SOLO SEAT
•Super comfortable 17” wide solo seat •Sits driver 1.25” further back than stock seat •Seat is also lower (approximately .5”) than stock so rider can plant his feet on ground •Expanded vinyl cover •Optional wide rear seats offer maximum cushion •Made in the U.S.A. NOTE: Will not fit with handrail.
PART # DESCRIPTION FOR 08-10 FLHT, FLHR, FLTR, FLHX 0801-0547 0805-0036 0801-0548
Vintage solo seat, (17”W) Vintage rear seat, (13.5”W) Chrome studded solo seat, (17”W)
SUG. RETAIL $319.95 198.95 339.95
PART # DESCRIPTION FOR 08-10 FLHT, FLHR, FLTR, FLHX (CONT) 0801-0573 0801-0549 DS-905562
Chrome studded rear seat, (13.5”W) Black studded solo seat, (17”W) Black studded rear seat, (13.5”W)
SUG. RETAIL $208.95 339.95 208.95
11
0801-0550
0801-0554
WIDE TRIPPER™ SEATS
•Low and lean seat offers a full 14” width for the driver and an 11” wide passenger seat •Features a sleek design accented with detailed stitch work •Expanded vinyl cover •Made in the U.S.A.
PART # DESCRIPTION FOR 08-10 FLHT, FLTR, FLHX, FLHR
0801-0554 Wide Tripper™ seat, (14” W front, 11” W rear)
SUG. RETAIL $379.95
PART # DESCRIPTION SUG. RETAIL FOR 97-07 FLHR, 06-07 FLHX (EXCEPT FLHRS) 0801-0550 Wide Tripper™ seat, (14” W front, 11” W rear)
$379.95
PART # DESCRIPTION FOR 97-07 FLHT, FLTR
SUG. RETAIL
0801-0551 Wide Tripper™ seat, (14” W front, 11” W rear)
$379.95
0801-0568
0801-0559
WIDE TRIPPER™ SEAT WITH DRIVER BACKREST
•Style meets comfort in a seat that offers a full 14” width for driver and an 11” wide passenger seat •Features a sleek design accented with detailed stitch work •Expanded vinyl cover •Made in the U.S.A.
PART # DESCRIPTION FOR 08-10 FLHT, FLHR, FLTR, FLHX 0801-0568
Wide Tripper™ seat, (14” W)
SUG. RETAIL
PART # DESCRIPTION SUG. RETAIL FOR 97-07 FLHR, 06-07 FLHX (EXCEPT FLHRS) 0801-0559
$579.95
Wide Tripper™ seat, (14” W)
$579.95
PART # DESCRIPTION FOR 97-07 FLHT, FLTR 0801-0558
Wide Tripper™ seat, (14” W)
SUG. RETAIL $579.95
TRIPPER™ FASTBACK SEATS 0801-0552
•Offers a super clean, custom style •Cut low for the rider with good back support •Tapered in back but still offers good passenger comfort •Expanded vinyl cover •Made in the U.S.A.
PART # DESCRIPTION FOR 97-07 FLHR , 06-07 FLHX (EXCEPT FLHRS) 0801-0552
Tripper™ Fastback seat, (12” W front, 7” W rear)
$339.95
0801-0553
Tripper™ Fastback seat, (12” W front, 7” W rear)
339.95
FOR 97-07 FLHT, FLTR
12
SUG. RETAIL
september 2010 | 9901-0813