NAV Imports Australia Pty Ltd
METALTECH
Metals Product Catalogue Version 1 NAV Imports Australia Pty Ltd 5-6 Ormsby Place, Wetherill Park NSW 2164 P: (02) 9757 1751 | F: (02) 9757 1757 E: sales@navimportsaustralia.com.au W: www.navimportsaustralia.com.au
www.navimportsaustralia.com.au
Introduction Welcome to our new Insize, Metaltech Grip and Pittsburg catalogue containing over 500 products. This catalogue demonstrates our comprehensive, growing range and will prove to be of a great assistance when ordering our products. Products are listed by major sections. Please note that specifications and details as shown are believed to be correct and subject to commercial tolerances at the time of printing. However, there are some occasions beyond our control, where we reserve the right to offer goods of similar quality or in alternative packaging. Update sheets will be issued regularly for new product releases to keep this catalogue continually up to date, and your feedback on our products and services is always valued and welcomed. This catalogue replaces all previous catalogues.
Insize, Metaltech, Grip & Pittsburg Warranty Terms and Conditions Insize & Metaltech products are warranted against defects in workmanship and materials and will be repaired or replaced free of charge. This warranty in no way covers modified, abused, neglected or excessively worn products as a result of misuse or general wear and tear. Any product subject to a claim must be assessed by a NAV Imports distributor and/or representative and if the claim is accepted, the product will be repaired or replaced free of charge. In the event that the accepted product cannot be repaired or replaced, a credit will be raised for the full amount of the purchase. NAV Imports Aust. Pty Ltd places responsibility on the distributor to use knowledge and judgment as to the approval or replacement of the defective product should it occur. Any product claimed for warranty must be returned to NAV Imports warehouse where possible at retailers’ expense (freight charges will be reimbursed if product is deemed to be faulty) and subject to negotiation for evaluation with appropriate paperwork and date of supply. Returns will not be accepted without prior notice. Most products are covered by 12 months warranty from date of resellers’ sale with the exception of the following; Please note: Consumable and products subject to wear and tear such as cutting tools, pilot pins, grinding wheels, drills etc are NOT covered by warranty. Repairs, tampering or modification carried out by unauthorised personnel will void all warranty.
2
www.navimportsaustralia.com.au
METALTECH Contents: Introduction......................................................................................................................................................Page 2 Insize, Metaltech, Grip & Pittsburg introduction Warranty Terms and Conditions......................Page 2 Jobber Drills & Drill Sets...............................................................................................................................Page 4 - 6 Jobber Drills & Turning Tool Sets...............................................................................................................Page 7 Left hand, Drill Set and End Mills...............................................................................................................Page 8 Bi - Metal Holesaws and Arbors...................................................................................................................Page 9 Core Drill and Broach Cutters......................................................................................................................Page 10 Insize Carbide Burrs.......................................................................................................................................Page 11 Insize Carbide Burrs & Torsion Philips Bit Sets......................................................................................Page 12 Insize Step Drills & Countersinks...............................................................................................................Page 13 Insize SDS Drills...............................................................................................................................................Page 14 Insize Bench Drill and Pedestial Drill Presses.........................................................................................Page 15 Bench Drill and Pedestial Drill Presses & Keyless Chucks..................................................................Page 16 Chuck Arbors, Drill Sleeves & Insize Live Centres.................................................................................Page 17 Pittsburg Fans...................................................................................................................................................Page 18 Metaltech Metal Working Machines...........................................................................................................Page 19 - 25 Manual Sheet Metal Slip Rolls......................................................................................................................Page 21 Metaltech Welding Machines.......................................................................................................................Page 26 - 27 Metaltech Welding Accessories...................................................................................................................Page 28 Metaltech Industrial Bench Grinders and Disc Sander........................................................................Page 29 The Metaltech Industrial Belt, Disc Sander & Wet Sharpener.............................................................Page 30 Industrial Sandblasting Cabinets................................................................................................................Page 31-32 Metaltech Industrial Sandblaster Cabinet & Accessories.....................................................................Page 33 Sand & Soda Blasters.......................................................................................................................................Page 34 Metaltech 7 Gallon Portable Soda Blaster..................................................................................................Page 35 Metaltech Replacement Nozzle Sets...........................................................................................................Page 36 Deadman Safety Gun, Replacement Nozzles & Sandblaster Accessories.........................................Page 37 Garnet Mesh, Glass Beads & Sodium Bicarbonate Soda .......................................................................Page 38 Sandblaster Accessories.................................................................................................................................Page 39-40 Grip Castors and Wheels................................................................................................................................Page 41-56 Grip Material Handling Equipment.............................................................................................................Page 57 Grip Material Handling, Measuring & Engineering Equipment..........................................................Page 58 Grip Cutting, Measuring & Engineering.....................................................................................................Page 59-63 Index - List of items..........................................................................................................................................Page 64-68
3
www.navimportsaustralia.com.au
Jobber Drills & Drill Sets Bright finish, HSS M2 grade drill bits are precision ground with a 135 degree split point for self-starter. Quick and efficient swarf clearance allows clog-free precision drilling. Ideal for use on metals, copper, plastics and wood. Drills are manufactured to comply to DIN338 standard. Set supplied in display case.
Jobber Drill Sets Metric Part No. IN0001
IN0002
Jobber Drill Sets Fractional
Product Name
Sizes
Barcode
19 Pc Drill Bits Set
1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5 and 10mm
9335319022537
25 Pc Drill Bits Set
1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5 and 13mm
9335319022544
Part No.
Product Name
Sizes
Barcode
IN0101
21 Pc Drill Bits Set
1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64 and 3/8”
9335319022889
29 Pc Drill Bits Set
1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64, 3/8, 25/64, 13/32, 27/64, 7/16, 29/64, 15/32, 31/64 and 1/2”
9335319022896
IN0102
1/2" REDUCED SHANK DRILL BIT SET
Bright finish, HSS M2 grade drill bits are precision ground with a 135 degree split point for self-starter. Quick and efficient swarf clearance allows clog-free precision drilling. Ideal for use on metals, copper, plastics and wood. Drills are manufactured to comply to DIN338 standard. Sets supplied in metal storage case.
1/2" Reduced Shank Drill Bit
Jobber Drill Sets Metric / Fractional
4
Diameter
Qty per Pack
Barcode
IN0035
13mm
1
9335319022803
IN0037
14mm
1
9335319022810
IN0038
15mm
1
9335319022827
IN0039
16mm
1
9335319022834
IN0041
18mm
1
9335319022841
IN0043
20mm
1
9335319022858
IN0045
22mm
1
9335319022865
IN0048
25mm
1
9335319022872
1/2" Reduced Shank Drill Bit Part No.
Diameter
Qty per Pack
Barcode
IN0140
9/16"
1
9335319023206
13, 14, 15, 16, 18, 20, 22 and 25mm
IN0141
5/8"
1
9335319023213
IN0142
11/16"
1
9335319023220
9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 and 1”
IN0143
3/4"
1
9335319023237
IN0144
13/16"
1
9335319023244
IN0145
7/8"
1
9335319023251
IN0146
15/16"
1
9335319023268
IN0147
1"
1
9335319023275
Part No.
Product Name
Sizes
IN0003
8 Pc Reduced Shank Drill Bits Set Metric 8 Pc Reduced Shank Drill Bits Fractional
IN0103
Part No.
www.navimportsaustralia.com.au
Jobber Drills & Drill Sets Bright finish, HSS M2 grade drill bits are precision ground with a 135 degree split point for self-starter. Quick and efficient swarf clearance allows clog-free precision drilling. Ideal for use on metals, copper, plastics and wood. Drills are manufactured to comply to DIN338 standard. Supplied in hang cell case.
Jobbers Drills Metric
Jobbers Drills Fractional
Part No.
Diameter
Qty per Pack
Barcode
Part No.
Diameter
Qty per Pack
Barcode
IN0011
1mm
10
9335319022568
IN0111
1/16”
10
9335319022919
IN0012
1.5mm
10
9335319022575
IN0112
5/64”
10
9335319022926
IN0013
2mm
10
9335319022582
IN0113
3/32”
10
9335319022933
IN0014
2.5mm
10
9335319022599
IN0114
7/64”
10
9335319022940
IN0015
3mm
10
9335319022605
IN0115
1/8”
10
9335319022957
IN0016
3.5mm
10
9335319022612
IN0116
9/64”
10
9335319022964
IN0017
4mm
10
9335319022629
IN0117
5/32”
10
9335319022971
IN0018
4.5mm
10
9335319022636
IN0118
11/64”
10
9335319022988
IN0019
5mm
10
9335319022643
IN0119
3/16”
10
9335319022995
IN0020
5.5mm
10
9335319022650
IN0120
13/64”
10
9335319023008
IN0021
6mm
10
9335319022667
IN0121
7/32”
10
9335319023015
IN0022
6.5mm
5
9335319022674
IN0122
15/64”
10
9335319023022
IN0023
7mm
5
9335319022681
IN0123
1/4”
5
9335319023039
IN0024
7.5mm
5
9335319022698
IN0124
17/64”
5
9335319023046
IN0025
8mm
5
9335319022704
IN0125
9/62”
5
9335319023053
IN0026
8.5mm
5
9335319022711
IN0126
19/64”
5
9335319023060
IN0027
9mm
5
9335319022728
IN0127
5/16”
5
9335319023077
IN0028
9.5mm
5
9335319022735
IN0128
21/64”
5
9335319023084
IN0029
10mm
5
9335319022742
IN0129
11/32”
5
9335319023091
IN0030
10.5mm
1
9335319022759
IN0130
23/64”
5
9335319023107
IN0031
11mm
1
9335319022766
IN0131
3/8”
5
9335319023114
IN0032
11.5mm
1
9335319022773
IN0132
25/64”
5
9335319023121
IN0033
12mm
1
9335319022780
IN0133
13/32”
1
9335319023138
IN0034
12.5mm
1
9335319022797
IN0134
27/64”
1
9335319023145
IN0035
13mm
1
9335319022803
IN0135
7/16”
1
9335319023152
IN0136
29/64”
1
9335319023169
IN0137
15/32”
1
9335319023176
IN0138
31/64”
1
9335319023183
IN0139
1/2”
1
9335319023190
5
www.navimportsaustralia.com.au
Jobber Drills & Drill Sets Bright finish, HSS M2 drill bits are precision ground with 135 degree split point for self-starter. Flute Type 30 Degree Helix. Quick and efficient swarf clearance allows clog-free precision drilling. Ideal for use on metals, plastics and wood. Drill in accordance with DIN338 standard.
HSS M2 Drill Bit Single (Blister Card) Part No.
HSS M2 Drill Bit Twin Pack (Blister Card)
Diameter
Qty per Pack
Barcode
IN0070
3.2mm
1
93335319028768
IN0071
3.5mm
1
9335319028126
4mm
1
9335319028133
Part No.
Diameter
Qty per Pack
Barcode
IN0065
1mm
2
9335319028072
IN0072
IN0066
1.5mm
2
9335319028089
IN0073
4.2mm
1
93335319028775
IN0067
2mm
2
9335319028096
IN0074
4.5mm
1
9335319028140
IN0068
2.5mm
2
9335319028102
IN0075
5mm
1
9335319028157
IN0069
3mm
2
9335319028119
IN0076
5.5mm
1
9335319028164
IN0077
6mm
1
9335319028171
IN0078
6.5mm
1
9335319028188
IN0079
7mm
1
9335319028195
IN0080
7.5mm
1
9335319028201
IN0081
8mm
1
9335319028218
IN0082
8.5mm
1
9335319028225
IN0083
9mm
1
9335319028232
IN0084
9.5mm
1
9335319028249
IN0085
10mm
1
9335319028256
Dark matt finish, HSS Cobalt 5% M35 drill bits are precision ground with 135 degree split point for self-starter. Flute Type 30 Degree Helix. Quick and efficient swarf clearance allows clog-free precision drilling. Ideal for use on metals, plastics and wood. Drill in accordance with DIN338 standard.
Cobalt HSS Drill Bit Single (Blister Card) Cobalt HSS Drill Bit Twin Pack (Blister Card)
Part No.
Part No.
Diameter
Qty per Pack
Barcode
IN0213
IN0201
1mm
2
9335319028263
IN0214
IN0202
1.5mm
2
9335319028270
IN0215
Qty per Pack
Barcode
6mm
1
9335319028362
6.5mm
1
9335319028379
7mm
1
9335319028386
IN0203
2mm
2
9335319028287
IN0216
7.5mm
1
9335319028393
IN0204
2.5mm
2
9335319028294
IN0217
8mm
1
9335319028409
IN0205
3mm
2
9335319028300
Cobalt HSS Drill Bit Single (Blister Card)
6
Diameter
IN0218
8.5mm
1
9335319028416
IN0219
9mm
1
9335319028423
IN0220
9.5mm
1
9335319028430
IN0221
10mm
1
9335319028447
IN0222
10.5mm
1
9335319028454 9335319028461
IN0223
11mm
1
Part No.
Diameter
Qty per Pack
Barcode
IN0224
11.5mm
1
9335319028478
IN0207
3.5mm
1
9335319028317
IN0225
12mm
1
9335319028485
IN0208
4mm
1
9335319028324
IN0226
12.5mm
1
9335319028492
IN0209
4.2mm
1
93335319028799
IN0227
13mm
1
9335319028508
IN0210
4.5mm
1
9335319028331
IN0211
5mm
1
9335319028348
IN0212
5.5mm
1
9335319028355
www.navimportsaustralia.com.au
Jobber Drills & Turning Tool Sets Bright finish, HSS M2 drill bits are precision ground with 135 degree split point for self-starter. Flute Type 30 Degree Helix. Quick and efficient swarf clearance allows clog-free precision drilling. Ideal for use on metals, plastics and wood. Drill in accordance with DIN340 standard.
HSS M2 Long Series Drill Bit Twin Pack (Blister Card) Part No.
Diameter
Barcode
IN0402
2x85mm
9335319028515
IN0403
2.5x95mm
9335319028522
IN0404
3.0x100
9335319028539
HSS M2 Long Series Drill Bit Single Pack (Blister Card)
Turning Tool Sets
7Pc Metal Lathe Tool Set Item No:
MTLT710
Specifications Indexable tungsten tools on 10mm square bodies Kit Contents: 1 x right hand Parting Tool 1 x Threading Tool 1 x right hand Roughing Turning Tool 1 x left hand 90ยบ Turning Tool 1 x right hand 90ยบ Turning Tool 1 x straight Profile Turning Tool 1 x right hand Profile Turning Tool
Part No.
Diameter
Barcode
IN0405
3.5x112mm
9335319028546
IN0406
4x119mm
9335319028553
IN0407
4.5x119mm
9335319028560
IN0408
5x132mm
9335319028577
IN0409
5.5x139mm
9335319028584
IN0410
6x139mm
9335319028591
IN0411
6.5x148mm
9335319028607
IN0412
7.0x156mm
9335319028614
IN0413
7.5x156mm
9335319028621
IN0414
8.0x165mm
9335319028638
IN0415
8.5x165mm
9335319028645
IN0416
9.0x175mm
9335319028652
IN0417
9.5x175mm
9335319028669
IN0418
10.0x184mm
9335319028676
IN0419
10.5x184mm
9335319028683
IN0420
11.0x195mm
9335319028690
IN0421
11.5x195mm
9335319028706
IN0422
12.0x205mm
9335319028713
IN0423
12.5x205mm
9335319028720
IN0424
13.0x205mm
9335319028737
9Pc Metal Lathe Tool Set Barcode:
Item No:
MTLT912
Specifications
Barcode:
Indexable tungsten tools on 12mm square bodies. Supplied in hand carry case Kit Contents: 1x Turning, Facing, Boring tool, (PSSNR) 2x Facing, Boring Bars, (PWUNR, PWKNR) 1x Internal Tthreading Tool, (LN) 1x External Threading tool, (LW) 1x Parting,Grooving Tool, (QA) 3x Various Angle Turning Tools, (PSSNR, PSBNR, PWGNR) 1x Allen Key 1x Screwdriver 1x Wooden Case
7
www.navimportsaustralia.com.au
Left hand, Drill Set and End Mills Left hand drill bits are primarily used for drilling out jammed or rusted bolts, studs etc. They will sometimes cause the thread to "walk out". The principle is the same as "screw extractors� or “Ezy-outs". Bright finish, HSS M2 grade drill bits are precision ground with a 118 degree split point. Quick and efficient swarf clearance allows clog-free precision drilling. Ideal for use on metals, copper, plastics and wood. Drills are manufactured to comply to DIN338 standard. Sets are supplied in heavy duty case.
Left Hand Drill Bit Set Part No.
IN0004
Product Name 15 Pc HSS M2 Left Hand Drill Bit Set
HSS M2 Pilot Drill Bit Sizes Sizes: 1.5, 2, 3, 4, 4.5, 5.5, 6, 7, 7.5, 8.5, 9.5,10, 11,11.5 and 12.5 mm.
Barcode
Part No.
Size
Barcode
IN0063
6.35 x 75mm
9335319001808
9335319008531
HSS M2 End Mill and Slot Drill Sets. Suitable for small workshops and hobby work manufactured from high speed steel with finite coated finish. Mill cutter with a range of both slot drills and mills.
20 Pc HSS M2 End Mill and Slot Drill Set
8
Product No.
Slot Drill Sizes
End Mill Sizes
GEM20
3, 4, 5, 6, 8, 10, 12, 14, 18 and 20mm
3, 4, 5, 6, 8, 10, 12, 14, 18 and 20mm
Barcode
9335319001419
12Pc HSS M2 End Mill and Slot Drill Set Product No.
Slot Drill Sizes
End Mill Sizes
Barcode
IN-12
3,4,6,8,10 & 12mm
3,4,6,8,10 & 12mm
9335319025248
www.navimportsaustralia.com.au
Bi - Metal Holesaws and Arbors Bi - Metal HSS Holesaws are ideal for cutting Cast Iron, Non-ferrous materials, wood, nail embedded wood, and plastic. Cutting Depth: 38mm (1-1/2”). Variable Pitch Teeth to reduce harmonic vibration and helps make precision cuts. 8% Cobalt content gives longer life.
Bi - Metal HSS Holesaws
Bi - Metal HSS Holesaws
Part No.
Size
Thread
Barcode
Part No
Size
Thread
Barcode
INBMHS14
14mm
1/2"
9335319027037
INBMHS64
64mm
5/8"
9335319027358
9335319027075
INBMHS65
65mm
5/8"
9335319027365
67mm
5/8"
9335319027372
INBMHS16
16mm
1/2"
INBMHS17
17mm
1/2"
9335319027082
INBMHS67
INBMHS19
19mm
1/2"
9335319027099
INBMHS68
68mm
5/8"
9335319027389
70mm
5/8"
9335319027396
INBMHS20
20mm
1/2"
9335319027105
INBMHS70
INBMHS21
21mm
1/2"
9335319027112
INBMHS73
73mm
5/8"
9335319027402
INBMHS76
76mm
5/8"
9335319027419
INBMHS22
22mm
1/2"
9335319027129
INBMHS24
24mm
1/2"
9335319027136
INBMHS79
79mm
5/8"
9335319027426
INBMHS83
83mm
5/8"
9335319027433
INBMHS25
25mm
1/2"
9335319027143
INBMHS27
27mm
1/2"
9335319027150
INBMHS86
86mm
5/8"
9335319027440
89mm
5/8"
9335319027457 9335319027464
INBMHS29
29mm
1/2"
9335319027167
INBMHS89
INBMHS30
30mm
1/2"
9335319027174
INBMHS92
92mm
5/8"
9335319027181
INBMHS95
95mm
5/8"
9335319027471
INBMHS98
98mm
5/8"
9335319027488 9335319026962
INBMHS32
32mm
5/8"
INBMHS33
33mm
5/8"
9335319027198
INBMHS35
35mm
5/8"
9335319027204
INBMHS102
102mm
5/8"
9335319027211
INBMHS105
105mm
5/8"
9335319026979
108mm
5/8"
9335319026986
111mm
5/8"
9335319026993 9335319027006
INBMHS37
37mm
5/8"
INBMHS38
38mm
5/8"
9335319027228
INBMHS108
INBMHS40
40mm
5/8"
9335319027235
INBMHS111
INBMHS41
41mm
5/8"
9335319027242
INBMHS114
114mm
5/8"
9335319027259
INBMHS121
121mm
5/8"
9335319027013
127mm
5/8"
9335319027020 9335319027044
INBMHS43
43mm
5/8"
INBMHS44
44mm
5/8"
9335319027266
INBMHS127
INBMHS46
46mm
5/8"
9335319027273
INBMHS140
140mm
5/8"
INBMHS48
48mm
5/8"
9335319027280
INBMHS146
146mm
5/8"
9335319027051
INBMHS152
152mm
5/8"
9335319027068
INBMHS51
51mm
5/8"
9335319027297
INBMHS52
52mm
5/8"
9335319027303
INBMHS54
54mm
5/8"
9335319027310
INBMHS57
57mm
5/8"
9335319027327
INBMHS59
59mm
5/8"
9335319027334
INBMHS60
60mm
5/8"
9335319027341
Arbor for Bi-Metal Hole Part No.
Size
Shank Size
Barcode
INAR1430
Saw Sizes 14-30mm
3/8" HEX
9335319001808
INAR32200
Saw Sizes 32-200mm
7/16" HEX
9335319001815
9
www.navimportsaustralia.com.au
Core Drill and Broach Cutters HSS broach cutters are used on portable magnetic base drills. Industrial grade high speed steel precision manufactured. Peripheral cutting with no dead points provide smooth efficient cuts. Superior tooth geometry provides single pass, timely cutting without the need of a pilot hole. Standard 19mm multi - shank universal mounting fitment.
HSS Broach Cutter
HSS Broach Cutter
Part No.
Size
Drill Depth
Shank Size
Barcode
Part No.
Size
Drill Depth
Shank Size
Barcode
IN-1250
12mm
50mm
19mm
9335319026726
IN-1225
12mm
25mm
19mm
9335319026719 9335319026733
IN-1450
14mm
50mm
19mm
9335319025781
IN-1425
14mm
25mm
19mm
IN-1650
16mm
50mm
19mm
9335319025798
IN-1625
16mm
25mm
19mm
9335319026740
IN-1850
18mm
50mm
19mm
9335319025804
IN-1825
18mm
25mm
19mm
9335319026757
IN-2050
20mm
50mm
19mm
9335319025811
IN-2025
20mm
25mm
19mm
9335319026764
IN-2250
22mm
50mm
19mm
9335319025828
IN-2225
22mm
25mm
19mm
9335319026771
IN-2450
24mm
50mm
19mm
9335319025835
IN-2425
24mm
25mm
19mm
9335319026788
IN-2525
25mm
50mm
19mm
9335319026795
IN-2525
25mm
25mm
19mm
9335319026795
IN-2550
25mm
50mm
19mm
9335319026801
IN-2625
26mm
25mm
19mm
9335319026818
IN-2650
26mm
50mm
19mm
9335319026825
IN-2825
28mm
25mm
19mm
9335319026832
IN-2850
28mm
50mm
19mm
9335319026849
IN-3025
30mm
25mm
19mm
9335319026856
IN-3050
30mm
50mm
19mm
9335319026863
IN-3225
32mm
25mm
19mm
9335319026870
IN-3225
32mm
50mm
19mm
9335319026870
IN-3325
33mm
25mm
19mm
9335319026894
IN-3250
32mm
50mm
19mm
9335319026887
IN-3425
34mm
25mm
19mm
9335319026917
IN-3350
33mm
50mm
19mm
9335319026900
IN-3450
34mm
50mm
19mm
9335319026924
IN-3650
36mm
50mm
19mm
9335319026931
IN-3850
38mm
50mm
19mm
9335319026948
IN-4050
40mm
50mm
19mm
9335319026955
7Pc 25mm Deep Cut Broach Cutter Set Part No.
Specifications
Barcode
BOH-071925
6 - Piece Set (14, 16, 18, 20, 22 & 24mm) with 19mm universal shank, 25mm depth of cut.Supplied in plastic carry case. Includes: 1 x 6.35mm (1/4”) locating pin.
9335319001853
Locating Pins Magnetic Base Core Drill Part No.
Size
Watt
BOH-32
up to 32mm
1550
BOH-42
up to 42mm
1700
10
Capable, Tough, Accurate, Powerful and Reliable the Bohrer is in a class of it's own, specifically designed in Germany with safe heavy duty use in mind.
Part No.
Size
Drill Depth
Barcode
IN-635103
Ø6.34mm
103mm
9335319008012
IN-63577
Ø6.34mm
77mm
9335319028041
www.navimportsaustralia.com.au
Insize Carbide Burrs Insize Carbide Burrs are manufactured to industrial Quality Standards. They are suitable for Steel, Cast Iron, Brass, Copper, Aluminium, Non Ferrous Metals and plastic. The stock removal is rapid in both hard and soft materials due to the double cut style. All Burrs have a 6mm shank. Used in air and electric die grinders. Individual burrs are supplied in hang cell packaging with barcodes.
IN-05106 5Pc Tungsten Carbide Burrs Set Set Contents: INSB-3
Cylindrical With End Cut Size: 10 x 20 x 65mm (Diameter x Cutting Length x Total Length) Applications - Peripheral and Face Milling. INSC-3
Cylindrical Ball Nose Size: 10 x 20 x 65mm (Diameter x Cutting Length x Total Length) Applications - Surface Milling and Contouring. INSF-3
Tree Shape with Radius End Size: 10 x 20 x 65mm (Diameter x Cutting Length x Total Length) Application - Narrow Contouring. INSG-3
Tree Shape with Pointed End Size: 10 x 20 x 65mm (Diameter x Cutting Length x Total Length) Applications - Milling, Narrow Contouring and Acute Angle Milling. INSL-3
Taper Radius End Size: 10 x 25 x 65mm (Diameter x Cutting Length x Total Length) Applications - Narrow Contouring and Surface Machining.
Individual Carbide Burrs Double Cut Cylindrical Shape Carbide Burr Double Cut Application - Deburring.
INSA-2 INSA-3 INSA-5
Size 8 x 20 x 65 mm (Diameter x Cutting Length x Total Length) Size 10 x 20 x 65mm (Diameter x Cutting Length x Total Length) Size 12 x 25 x 70mm (Diameter x Cutting Length x Total Length)
Cylindrical Shape Carbide Burr Double Cut With End Cut Applications - Peripheral Milling and Face Milling.
INSB-3 INSB-5
Size 10 x 20 x 65mm (Diameter x Cutting Length x Total Length) Size 12 x 25 x 70mm (Diameter x Cutting Length x Total Length)
Cylindrical Ball Nose Shape Carbide Burr Double Cut Applications - Surface Milling and Contouring.
INSC-2 INSC-3 INSC-5
Size: 8 x 20 x 65mm (Diameter x Cutting Length x Total Length) Size: 10 x 20 x 65mm (Diameter x Cutting Length x Total Length) Size: 12 x 25 x 70mm (Diameter x Cutting Length x Total Length)
Ball Shape Carbide Burr Double Cut Applications - Hole Deburring, Contouring and Build-Up Welding Preparation.
INSD-2 INSD-3 INSD-5
Size: 8 x 7 x 52mm (Diameter x Cutting Length x Total Length) Size: 10 x 9 x 54mm (Diameter x Cutting Length x Total Length) Size: 12 x 10 x 56mm (Diameter x Cutting Length x Total Length)
Oval Shape Carbide Burr Double Cut Application - Contouring.
INSE-3
Size 10 x 16 x 61mm (Diameter x Cutting Length x Total (Length)
Tree Shape with Radius End Carbide Burr Double Cut Application - Narrow Contouring.
INSF-3 INSF-5
Size 10 x 20 x 65mm (Diameter x Cutting Length x Total Length) Size 12 x 25 x 70mm (Diameter x Cutting Length x Total Length)
11
www.navimportsaustralia.com.au
Insize Carbide Burrs & Torsion Philips Bit Sets Insize Carbide Burrs are manufactured to industrial Quality Standards. They are suitable for Steel, Cast Iron, Brass, Copper, Aluminium, Non Ferrous Metals and plastic. The stock removal is rapid in both hard and soft materials due to double cut style. All Burrs have a 6mm shank. Used in air and electric die grinders. Individual burrs are supplied in hang cell packaging with barcodes.
Tree Shape with Pointed End Carbide Burr Double Cut Applications - Milling, Narrow Contouring and Acute Angle Milling. Flame Shape Carbide Burr Double Cut Applications - Contouring and Milling.
Taper with Radius End Carbide Burr Double Cut Applications - Narrow Contouring, Surface Machining and Surface.
Pointed Cone Shape Carbide Burr Double Cut Applications - Narrow Contouring, Surface Machining.
Inverted Taper Carbide Burr Double Cut Applications - Removing and Deburring
INSG-3
Size 10 x 20 x 65mm (Diameter x Cutting Length x Total Length)
INSH-2 INSH-5
Size 8 x 20 x 63 mm (Diameter x Cutting Length x Total Length) Size 12 x 32 x 76mm (Diameter x Cutting Length x Total Length)
INSL-3
Size 10 x 20 x 65mm (Diameter x Cutting Length x Total Length)
INSM-3
Size 10 x 20 x 65mm (Diameter x Cutting Length x Total Length)
INSN-1
Size 6 x 52 x 52mm (Diameter x Cutting Length x Total Length)
Insize Torsion Philips Bit Sets are used in cordless power impact screwdrivers. Manufactured from S3 grade steel with a unique inbuilt torsion zone that delivers the ability to absorb 3 times the shock of a normal screwdriver bit. Their precision fit #2 tip prevents slippage, wobble and provides longer service life.
2Pc PH2x150mm Torsion Philips Bit Set Part No.
Specifications
INPH2150
1/4" hex shank #2 Phillips 150mm(6") length
10 Pc#2 Torsion Power Impact Driver Bits
5 Pc#2 Torsion Power Impact Driver Bits
Part No.
Specifications
Part No.
Specifications
INPH2251
1/4" Hex shank #2 Phillips 25mm (1") length
INPH2505
1/4" hex shank #2 phillips 50mm (2") length
12
www.navimportsaustralia.com.au
Insize Step Drills & Countersinks Insize step drills have multipurpose use. These step drills are designed for drilling and deburring repetitive holes in Aluminium, Brass, Copper, Steel, Plastic, Plexiglas, laminates and many other thin materials. Insize step drills are used by sheet metal workers, auto mechanics, electricians and the serious handyman. Manufactured from premium quality high speed steel with a double fluted ground cutting edge.
3 Pcs HSSM2 Straight Flute Step Drill Set Part No.
Product Name
Barcode
INSD-03
3 Pcs HSSM2 Straight Flute Step Drill Set
9335319027495
INSD4-12
Size: 4 - 12mm
9335319027501
INSD4-20
Size: 4 - 20mm
9335319027518
INSD4-32
Size: 4 - 32mm
9335319027525
Insize Countersinks are made from 100% M42 Cobalt High Speed Steel. They are used for countersinking, holes and deburring in a wide variety of materials including ferrous and non-ferrous metals. The triple wide angled fluted design is self-centering allowing the user to provide a heavy chamfer in the entrance of a drilled hole. This heavy chamfer may also be required to allow the correct seating of a countersink head screw or to provide the lead in for a second machining operation such as tapping. It can be used on medium hard materials and has the ability to be resharpened.
6 Pcs 3 Flute HSSM2 Countersink Set Part No.
Product Name
Shank Size
Barcode
INSTCS1
6 Pcs 3 Flute HSSM2 Countersink Set
5,6,7,8,10mm
9335319027679
INSTCS06
Size: 3 - 6.3 mm
5mm
9335319027655
INSTCS08
Size: 3 - 8.3 mm
6mm
9335319027662
INSTCS10
Size: 3 - 10.4 mm
6mm
9335319027686
INSTCS12
Size: 3 - 12.4 mm
8mm
9335319027693
INSTCS16
Size: 3 - 16.5 mm
10mm
9335319027709
INSTCS20
Size: 3 - 20.5 mm
10mm
9335319027716
13
www.navimportsaustralia.com.au
Insize SDS Drills SDS - Plus Rotary Hammer Drill Bits Insize SDS - Plus Rotary Hammer Drill Bits are manufactured using high quality industrial grade 40 chrome vanadium steel. They comply to DIN8035 standard. Ideal for use on natural and artifical stone, masonry, brickwork and re-enforced concrete. SDS PLUS
SDS-plus Rotary Hammer Drill Bit Part No.
Size
Barcode
INSP10160
10 x 160mm
9335319026047
INSP10210
10 x 210mm
9335319026054
INSP12160
12 x 160mm
9335319026061
INSP12210
12 x 210mm
9335319026078
INSP14260
14 x 260mm
9335319026085
INSP16260
16 x 260mm
9335319026092
INSP18260
18 x 260mm
9335319026108
INSP20260
20 x 260mm
9335319026115
INSP5110
5 x 110mm
9335319026122
INSP5160
5 x 160mm
9335319026139
INSP55110
5.5 x 110mm
9335319026146
INSP6160
6 x 160mm
9335319026153 9335319026160
INSP65160
6.5 x 160mm
INSP65210
6.5 x 210mm
9335319026177
INSP8160
8 x 160mm
9335319026184
INSP8210
8 x 210mm
9335319026191
Features: • Blisteringly fast penetration • 30% faster than the average SDS plus drill bit • Quad cutting edge provides four carbide cutting surfaces • Double spiral flutes give a more efficient removal of drilled stock extending drill life • Brazed tip to ensure a perfect bond between tip and body
SDS - Max Rotary Hammer Drill Bits Insize SDS max rotary hammer drill bits are manufactured using high quality industrial grade 40 chrome vanadium steel. They comply to DIN8035 standard. Ideal for use on natural and artificial stone, masonry, brickwork and re-enforced concrete. SDS MAX
SDS - Max Rotary Hammer Drill Bit Part No.
Size
Barcode
INSM16400
16 x 400mm
9335319027532
INSM16600
16 x 600mm
9335319027549
INSM18400
18 x 400mm
9335319027556
INSM18600
18 x 600mm
9335319027563
INSM20400
20 x 400mm
9335319027570
INSM20600
20 x 600mm
9335319027587
INSM22400
22 x 400mm
9335319027594
INSM22600
22 x 600mm
9335319027600
INSM25400
25 x 400mm
9335319027617 9335319027624
INSM25600
25 x 600mm
INSM28400
28 x 400mm
9335319027631
INSM28600
28 x 600mm
9335319027648
14
FEATURES • Blisteringly fast penetration • 30% faster than the average SDS max drill bit • Quad cutting edge provides four carbide cutting surfaces • Double spiral flutes give a more efficient removal of drilled stock extending drill life • Brazed tip to ensure a perfect bond between tip and body
www.navimportsaustralia.com.au
Insize Bench Drill and Pedestial Drill Presses
IN4120 Bench Drill Press 20mm Type
IN4120
Barcode: 9335319026283
Bench
Features
Motor
750W/1HP 240v-3.6Amp
Chuck Size
3-16mm B16
Drilling Capacity (max.)
20mm
Spindle Travel
82mm
Spindle Taper
2MT
Quill Diameter
47mm
Collar Diameter
55mm
Spindle Speed Steps
16
Spindle Speed Range
220-2840rpm
Swing
360mm
Working Table
290 x 290mm
Base Plate
460 x 280mm
Column Diameter
72mm
Emergency Stop NVR Safety Switch
Yes
Micro switch on Pulley Guard
Yes
Chuck Guard
Yes
Overall Height
990mm
Weight
57/53kg
Packing Dimension (Shipping)
820 × 500 × 290mm
• Heavy duty quality casting, main body 1 piece construction. • Main column tube thick walled giving greater rigidity. • Efficient and smooth V belt drive system with adjustable spindle speeds. • Micro safety switch fitted to pulley guard to ensure “non start “ when changing spindle speeds. • Belt tensioning lever quick action type. • Work table slotted in base to allow rigid mounting of work. • Left and right tilt work table, rotation to 45% with gauge. • Heavy duty rack and pinion work table height adjustment with locking lever. • Industrial duty 3 piece drilling lever with depth stop. • Safety drilling chuck guard, adjustable with flip up screen. • No Voltage Release Safety Switch. • Quality copper wound 240 volt fan cooled, aluminium finned electric motor. • 16 Spindle Speed: 220, 310, 350, 470, 480, 500, 640, 680, 700, 750, 1270, 1370, 1520, 1910, 2040 & 2840 RPM Includes: • 16mm keyed drill chuck and arbor • Chuck key to suit • Drill drift tool to remove drill chuck or taper shank drills
IN5120 Pedestal Drill Press 20mm Type
Barcode: 9335319026290
Pedestal
Features
Motor
750W/1HP 240v-3.6Amp
Chuck Size
3-16mm B16
Drilling Capacity (max.)
20mm
Spindle Travel
82mm
Spindle Taper
2MT
Quill Diameter
47mm
Collar Diameter
55mm
Spindle Speed Steps
16
Spindle Speed Range
220-2840rpm
Swing
360mm
Working Table
290 x 290mm
Base Plate
460 x 280mm
Column Diameter
72mm
Emergency Stop NVR Safety Switch
Yes
Micro switch on Pulley Guard
Yes
Chuck Guard
Yes
Overall Height
1580mm
Weight
65/61kg
Packing Dimension (Shipping)
1150 x 500 x 300mm
• Heavy duty quality casting, main body 1 piece construction. • Main column tube thick walled giving greater rigidity. • Efficient and smooth V belt drive system with adjustable spindle speeds. • Micro safety switch fitted to pulley guard to ensure “non start “ when changing spindle speeds. • Belt tensioning lever quick action type. • Work table slotted in base to allow rigid mounting of work. • Left and right tilt work table, rotation to 45% with gauge. • Heavy duty rack and pinion work table height adjustment with locking lever. • Industrial duty 3 piece drilling lever with depth stop. • Safety drilling chuck guard, adjustable with flip up screen. • No Voltage Release Safety Switch. • Quality copper wound 240 volt fan cooled, aluminium finned electric motor. • 16 Spindle Speeds: 220,310,350,470,480, 500,640,680,700,750,1270,1370,1520,1910, 2040 & 2840 RPM Includes: • 16mm keyed drill chuck and arbor • Chuck key to suit • Drill drift tool to remove drill chuck or taper shank drills
IN5120
15
www.navimportsaustralia.com.au
Bench Drill and Pedestial Drill Presses & Keyless Chucks IN5125 Pedestal Drill Press 25mm Type
IN5125
Pedestal
Motor
750W/1HP 240v-3.6Amp
Chuck Size
5-20mm B22
Drilling Capacity (max.)
25mm
Spindle Travel
82mm
Spindle Taper
3MT
Quill Diameter
47mm
Collar Diameter
65mm
Spindle Speed Steps
12
Spindle Speed Range
280-2380rpm
Swing
360mm
Working Table
290 x 290mm
Base Plate
460 x 280mm
Column Diameter
80mm
Emergency Stop NVR Safety Switch
Yes
Micro switch on Pulley Guard
Yes
Chuck Guard
Yes
Overall Height
1580mm
Weight
71/67kg
Packing Dimension (Shipping)
1150 x 500 x 300mm
IN5132 Pedestal Drill Press 32mm Type
IN5132
Pedestal
Motor
1100W/1.5HP240v-7Amp
Chuck Size
5-20mm B22
Drilling Capacity (max.)
32mm
Spindle Travel
120mm
Spindle Taper
4MT
Quill Diameter
62mm
Collar Diameter
75mm
Spindle Speed Steps
12
Spindle Speed Range
150-2450rpm
Swing
438mm
Working Table
470 x 420mm
Base Plate
580 x 430mm
Column Diameter
92mm
Emergency Stop NVR Safety Switch
Yes
Micro switch on Pulley Guard
Yes
Chuck Guard
Yes
Overall Height
1700mm
Weight
130/120kg
Packing Dimension (Shipping)
1430 x 660 x 330mm
Barcode: 9335319026306 Features • Heavy duty quality casting, main body 1 piece construction. • Main column tube thick walled giving greater rigidity. • Efficient and smooth V belt drive system with adjustable spindle speeds. • Micro safety switch fitted to pulley guard to ensure “non start “ when changing spindle speeds. • Belt tensioning lever quick action type. • Work table slotted in base to allow rigid mounting of work. • Left and right tilt work table, rotation to 45% with gauge. • Heavy duty rack and pinion work table height adjustment with locking lever. • Industrial duty 1 piece cast-iron drilling lever with depth stop. • Safety drilling chuck guard, adjustable with flip up screen. • No Voltage Release Safety Switch. • Quality copper wound 240 volt fan cooled, aluminium finned electric motor. • 12 Spindle Speeds: 280,420,440,550,620, 660,1150,1180,1400,1550 ,1830 & 2380RPM Includes: • 20mm keyed drill chuck and arbor • Chuck key to suit • Drill drift tool to remove drill chuck or taper shank drills
Barcode: 9335319026313 Features • Heavy duty quality casting, main body 1 piece construction. • Main column tube thick walled giving greater rigidity. • Efficient and smooth V belt drive system with adjustable spindle speeds. • Micro safety switch fitted to pulley guard to ensure “non start “ when changing spindle speeds. • Belt tensioning lever quick action type. • Work table slotted in base to allow rigid mounting of work. • Left and right tilt work table, rotation to 45% with gauge. • Heavy duty rack and pinion work table height adjustment with locking lever. • Industrial duty 1 piece cast-iron drilling lever with depth stop. • Safety drilling chuck guard, adjustable with flip up screen. • No Voltage Release Safety Switch. • Quality copper wound 240 volt fan cooled, aluminium finned electric motor. • 12 Spindle Speeds: 150, 240, 270, 330, 430, 470, 830, 1030, 1270, 1430, 1790 & 2450 RPM. Includes: • 20mm keyed drill chuck and arbor • Chuck key to suit • Drill drift tool to remove drill chuck or taper shank drills
Insize Precision Keyless Chucks are quality industrial grade precision manufactured to a true running accuracy of 0.05mm. Industrial knurled finish, self-tightening feature automatically increases gripping pressure proportionally to prevent tool shank slippage. Optimum quality low sheen finish. Keyless Chucks
16
Part No.
Model
Capacity
Dimension
Barcode
INJO113
B16
1-13mm
44 x 94.5mm
9335319026528
INJO116
B18
1-16mm
51 x 112mm
9335319026535
www.navimportsaustralia.com.au
Chuck Arbors, Drill Sleeves & Insize Live Centres Insize Drill Chuck Arbors are made from quality industrial hardened steel. Ground finish for high precision and true running accuracy. Used to mount a drill chuck or any other tool which has a female tapered shank. Insize Drill Chuck Arbors Part No.
Size
Capacity
Barcode
INMS2B16
MT2
B16
9335319026382
INMS2B18
MT2
B18
9335319026399
INMS2JT2
MT2
JT2
9335319026405
INMS2JT3
MT2
JT3
9335319026412
INMS2JT6
MT2
JT6
9335319026429
INMS3B16
MT3
B16
9335319026436
INMS3B18
MT3
B18
9335319026443
INMS3JT3
MT3
JT3
9335319026450
INMS3JT4
MT3
JT4
9335319026467
INMS3JT6
MT3
JT6
9335319026474
Insize Morse Taper Drill Sleeve are made from quality industrial grade hardened steel. Precision ground both internally and externally for true running accuracy. Permanent marking of size on the tang ensures accuracy and convenient use. Insize Morse Taper Drill Sleeve Item No:
Size
Outside Taper
Inside Taper
Barcode
INR2x1
2MT x 1MT
2MT
1MT
9335319003703
INR3x2
3MT x 2MT
3MT
2MT
9335319003710
INR4x2
4MT x 2MT
4MT
2MT
9335319026368
INR4x3
4MT x 3MT
4MT
3MT
9335319026375
Insize Triple Bearing Precision Live Centre Triple Bearing Precision Live Centre Part No.
Taper
Length (mm)
Diameter (mm)
Maximum RPM
Barcode:
INMT2
MT2
132
40
4000
9335319026566
Features: • Quality industrial assembly with 3 preloaded, anti friction ball bearings to avoid starting loads. • Suitable for middle and high speeds. • Quality industrial grade alloy steel, heat treated shaft (HRC 60°+_2°). • Precision ground for high quality and true running accuracy. • Run out accuracy within .0002” (0.005mm). • 60° middle centre angle.
Insize Medium Duty Live Centre Medium Duty Live Centre Item No:
Taper
Length (mm)
Diameter (mm)
Maximum RPM
Barcode:
GMT2
MT2
145
45
5000
9335319026702
Features: • Quality assembly with ball bearing and plain thrust bearing. • Suitable for medium speed. • Quality industrial grade alloy steel, heat treated shaft (HRC 60°+_2°). • Precision ground for high quality and true running accuracy. • Run out accuracy within 0.01mm. • 60° middle centre angle.
17
www.navimportsaustralia.com.au
Pittsburg Fans Pittsburgh Fans are manufactured to industrial quality standards with copper wound electric motors and heavy duty hardware. They are effective for removal of waste gas odourised air, air circulation and ventilation in confined spaces as well as equipment cooling.
750mm Industrial Pedestal Fan Part No.
Specifications:
PFS-75
• 240V/10amp/280watt copper wound motor, 1350rpm • Adjustable height (min/max) 1560-1900mm. • 750mm Blade Diameter. • 290 cub m/min air flow. • 3-speed control. • Fixed or Oscillates to 90º • Strong Powder coated safety guard. • Heavy-duty rubber filled non slip four leg base.
Barcode
9335319026269
450mm Floor & Desk Fan Part No.
Specifications:
PFE-45
• 240V/10amp/165watt copper wound motor, 1350rpm. • 450mm Blade Diameter. • 124 cub m/min air flow. • 3-speed button type control. • Chrome safety guard.
Barcode
9335319026252
750mm Industrial Wall Mount Fan Part No.
Specifications:
PFB-75
• 240V/10amp /280watt copper wound motor, 1350rpm. • 750mm Blade Diameter. • 290 cub m/min air flow. • 3-speed control. • Fixed or Oscillates to 90º. • Strong Powder coated safety guard.
Barcode
9335319026245
Portable Blower Fans Part No.
Specifications:
Barcode
PVF300
• Heavy Duty Industrial grade, low noise 240V/10AMP/50HZ/550 Watt high efficiency copper wound • electric motor. Air Flow • 65cum./min @2800rpm. Single speed Push Button switching.
9335319026207
PVF400
• Heavy Duty Industrial grade, low noise 240V/10AMP/50HZ/1100Watt high efficiency copper wound • electric motor. Air Flow • 128cum./min @2800rpm. Single speed Push Button switching.
9335319026214
Adjustable and Moveable Ventilation Blower Fan Part No.
Specifications:
PVF500
• 2 HP/1500 watt, 240Volt, • 50Hz, motor • Single Speed: 2800rpm • 160 M3/Min Air Flow 500mm (20”) Metal Blower; Weight: 41kg
PVF600
18
• 3 HP/2250 watt, 240Volt, • 50Hz, motor • Single Speed: 1600rpm • 320 M3/Min Air Flow 600mm (24”) • Metal Blower; Weight: 78kg
Ducting Hose Barcode
9335319026641
9335319026658
Part No.
Specifications:
PBR1012
300mm Diameter x 10M Flexible ducting Hose
Barcode 9335319026221
PBR1016
400mm Diameter x 10M Flexible ducting Hose
9335319026238
PBR1020
500mm Diameter x 10M Flexible ducting Hose
9335319026665
PBR1024
600mm Diameter x 10M Flexible ducting Hose
9335319026672
www.navimportsaustralia.com.au
Metaltech Metal Working Machines Metaltech Metal Machines are industrial grade multifunction sheet metal working machines that have the versatility to handle 3 separate functions. They can bend, roll and shear sheet metal via their unique single handle operation. The ideal workmate for the professional engineer's workshop or serious home handyman alike. 3 in 1 Shear, Brake & Roll Sheet Metal Working Machines Part No.
Specifications:
MTBRS305
• Maximum material thickness, 1.0mm (sheet metal), 1.5mm (aluminium) • Maximum length: 305mm • Roller diameter: 38mm • Minimum roll diameter: 38mm ID • Overall dimensions: (L x W x H) • 540 × 280 × 370 mm • Weight(nett): 45kg
MTBRS760
• Maximum material thickness 1.00mm (sheet metal), 1.5 mm (aluminium) • Maximum length: 760mm • Roller diameter: 38mm • Minimum roll diameter: 38mm ID • Overall dimensions: (L x W x H) • 1020 x 480 x 690 mm • Weight (nett): 135kg
MTBRS1016
• Maximum material thickness 1.0mm (sheet metal), 1.5mm (aluminium) • Maximum length: 1016mm • Roller diameter: 43mm • Minimum roll diameter: 43mm ID • Overall dimensions: (L x W x H) • 1280 × 600 × 750 mm • Weight (nett): 245kg
1320mm Sheet Metal Foot Shear Part No.
MTFS1320
Features:
Specifications:
Sturdy cast iron frame with truss bars for added stability. Ideal for precise shearing of mild steel up to 16 gauge, as well as plastic, zinc, aluminum, brass, copper and lead. Shear bed is precision ground for an accurate working surface. Double locking back-gauges have embossed scales and wheels for fine adjustments. Safety features include positive pedal stops and transparent finger guards. Precision tool steel blades. Includes table gauges and front mounted extension arms for holding larger pieces of material.
• Cutting length: 1320mm/52” • Capacity (mild steel): • 1.5mm/16 gauge • Back gauge range: 904mm/35” • Front gauge range: 320mm/12 ½” • Overall dimensions: 1670(L)x820(W)x1190(H)mm
• Net Weight: 430kg/480kg • Packing size: 1660x755x1165mm
Metaltech Type Pan Brake is large, quality pan brake. It has compression spring for top beam counterbalance, cam lock and rebound spring for bending beam counterbalance. Bow handle is also present for bending beam rotation.
Metaltech Type Pan Brake Part No. MTPB1270E
Specifications: • Bending Length: 1260mm • Folding Thickness For Mild Steel: 2mm • Max Folding Angle: 138 degree • Dimensions: 1600x950x1200mm
19
www.navimportsaustralia.com.au
Metaltech Metal Working Machines Metaltech Deluxe Bench Top Pan is large, robust, industrial quality pan brake for manual bending of mild steel sheet metal. It has 16 removable individual forming fingers for bending of pans or boxes. Precision machine finished bending bed and material thickness is compensated by adjustable clamp blade.
METALTECH
Metaltech Deluxe Bench Top Pan Brake Part No.
MTPB1220
Specifications: • 16 removable forming fingers, widths: • 5 × 51mm, 6 x 76mm and 5 x 101mm • Maximum bending thickness capacity: mild steel 1.2mm • Maximum material length capacity: 1220mm • Overall dimensions: (L x W x H) 1520 × 320 × 530 mm • Weight (nett): 175kg
Metaltech Bench Top Pan Brake for bending of mild steel sheet metal. Multiple forming finger widths for bending pans or boxes. Precision machine, finished bending bed and material thickness is compensated by adjustable clamp blade.
METALTECH
Metaltech Bench Top Manual Pan Brake Part No.
MTPB610
Specifications: • Multiple forming finger widths: (26, 51, 76,203 and 254mm) • Maximum bending thickness capacity: mild steel 1.0mm • Maximum material length capacity: 600mm • Overall dimensions: (L x W x H) 800 × 270 × 365mm • Weight (nett): 44kg
Manual Pan and Box Folder has fully welded plate construction with heavy duty counterweights and cavity. This allows trouble free forming with a fast, smooth and easy operation via spring loaded handles. The bending blade is hardened and precision ground.
Manual Pan and Box Folder 1295mm Part No.
MTPB1295
Specifications: • Capacity: 2.5mm/12 gauge • Bending Length: 1295mm • Maximum Lift of Beam: 32mm • Beam Adjustment: 25mm • Bending Angle: 0 to 135 Degree • Finger Sizes: 3, 4, 5 and 20"
METALTECH Metaltech 300mm sheet Metal Vice Held Press Brake Type Folder easily folds metal up to 1.6mm or shorter lengths up to 2.5mm. Great little versatile tool for those small jobs. Conveniently clamps into any bench vice for a quick use. Barcode: 9335319006674
300mm Metaltech Manual Sheet Metal Folder Part No.
81140
METALTECH
20
Specifications: • 300mm Max Width • 4 removable segment fingers: 25mm, 50mm, 75mm and 150mm • Quality Made Product • Maximum Sheet Thickness 1.6mm (will fold up to 2.5mm in short widths)
www.navimportsaustralia.com.au
Manual Sheet Metal Slip Rolls Metaltech 300mm Manual Sheet Metal Roller is a leader in its class. It can easily roll mild steel sheets up to 1.6mm in thickness. The unit conveniently clamps into any bench vice giving absolute versatility. The top roller is able to be adjusted to different heights. It can also be removed for different types of tasks. Two of the rollers feature five different sizes of wire grooves.
Barcode: 9335319006681
Metaltech 300mm Manual Sheet Metal Roller Part No.
81150
Specifications: • 300mm Roller Length • 30mm Roller Diameter • Lift out roller • Quality Made Product • Brass Roller Bushes • Maximum Sheet Thickness 1.6mm • (will roll up to 2.5mm in short widths) • Maximum Rod Thickness 5mm • Can be used with any type of pliable metal (eg.Stainless Steel, Mild Steel, Aluminium, Copper Etc.)
Heavy cast iron construction with front mounted handle for easy placement and release of work. Precision turned tool steel rolls with wire grooves are ground and polished to offer accuracy and stability. Hardened steel gearing. Large roll adjusting screws facilitate lifting the upper roll for easy removal of material.
METALTECH
610mm Manual Sheet Metal Slip Roll Part No. MTSP610
METALTECH
Specifications: Max Length: 610mm/24”. Capacity(mild steel): 1mm/20 gauge Roller diameter: 38mm/1-1/2”. Rod/Wire Grooves diameter: 3/16", 1/4", & 5/16" Shipping Dimensions: 950(L)x270(W)x380(H)mm. Weight: 37kg
1050mm Manual Sheet Metal Slip Roll Part No.
MTSP1050
Specifications: Max Length: 1050mm/40”. Capacity(mild steel): 1mm/20 gauge Roller diameter: 50mm/2”. Rod/Wire Grooves diameter: 3/16", 1/4", & 5/16" Shipping Dimensions:1480(L)x350(W)x500(H)mm. Weight: 86kg
1270mm Manual Sheet Metal Slip Roll Part No.
MTSP1270
Features:
Specifications:
Heavy cast iron construction with front mounted handle for easy placement and release of work piece. Precision-turned tool steel rolls with wire grooves are ground and polished to offer accuracy and stability. Hardened steel gearing. Large roll adjusting screws facilitate lifting the upper roll for easy removal of material.
• Maximum length: 1270mm/50” • Capacity(mild steel): 1.5mm/16 gauge • Diameter of Rolls: 75mm • Minimum forming radius: 38mm/1 ½” • Dimensions: • 1830(L)x355(W)x406(H)mm • Net Weight: 230kg/251kg • Packing size: 1750 x 430 x 565mm
METALTECH
21
www.navimportsaustralia.com.au
Metaltech Metal Working Machines Manual Shearing Machine is used for manual mechanical cutting of metals and other materials like Aluminium, Brass, Copper, Lead, Mild Steel, plastic and Zinc. Barcode: 9335319006698
Metaltech Manual Shearing Machine 150mm
METALTECH
Part No.
81200
Features: Heavy duty steel fabricated construction with 4 mounting holes for stability and safety. High quality chrome carbon steel blade (150mm /6”). Adjustable material thickness clamp. Long rubberized handle for maximum leverage. Satin hammer tone finish for corrosion resistance. Specifications: WORKING CUTTING CAPACITY: Plate soft mild steel 70 x 6mm Round soft mild steel 8mm Cutting length with 1.2mm thickness 140mm
Barcode: 9335319006704
Metaltech Manual Shearing Machine 200mm Part No.
81210
Features: Heavy duty steel fabricated construction with 4 mounting holes for stability and safety. High quality chrome carbon steel blade(200mm/8”). Adjustable material thickness clamp. Long rubberized handle for maximum leverage. Satin hammer tone finish for corrosion resistance. Specifications: WORKING CUTTING CAPACITY: Plate soft mild steel 70 x 6mm Round soft mild steel 10mm Cutting length with 1.2mm thickness 165mm
Barcode: 9335319006711
Metaltech Manual Shearing Machine 300mm Part No.
81220
Features: Heavy duty steel fabricated construction with 4 mounting holes for stability and safety. High quality chrome carbon steel blade(300mm /12”) Adjustable material thickness clamp. Long rubberized handle for maximum leverage. Satin hammer tone finish for corrosion resistance. Specifications: WORKING CUTTING CAPACITY: Plate soft mild steel 70 x 6mm Round soft mild steel 10mm Cutting length with 1.2mm thickness 265mm
Metaltech bending brake bends materials up to 17 gauge steel (1.4mm) and makes up to 90 degree bends. Ability to bend up to 750mm wide. Bending brake allows the user to make adjustments quickly using a protractor.
METALTECH
Barcode: 9335319009583
Metaltech Bending Brake 750mm Specifications:
81120
22
Bend materials up to 17 gauge steel (1.4mm) and makes up to 90 degree bends. Bends material up to 750mm wide. Designed for bench top mounting using 4 each 3/8" diameter bolts. Make adjustments quickly using a protractor. Packing Size: 930 x 190 x 80mm
www.navimportsaustralia.com.au
Metaltech Metal Working Machines Convenient, bench top universal steel benders sre designed for accurate hot and cold bending and shaping of various metal stock. Simply mount on a sturdy bench via the 4 mounting holes and you are ready to be creative. Ideal for flat, round, square or angled steel the “Metaltech" universal steel bender is an essential piece of equipment for the professional fabrication shop, farm workshop, or serious home handyman.
Metaltech Bench Top Universal Steel Bender Part No.
MTUB-100
Specifications: Precise bending range from 0 to 120° Flat steel: 100 x 5mm (cold); 100 × 10 mm (warm) Round steel: 18 mm (cold); 20 mm (warm) Square steel: 16 x 16 mm (cold); 20 × 20 mm (warm) Angle steel: 60 x 8 mm (cold, only with pre-notch); 100 × 10 mm (warm, only with pre-notch) Weight(nett): 32kg
METALTECH
Industrial Bench Top Universal Steel Bender Part No.
MTUB-100A
Specifications: Precise bending range from 0 to 120° Flat steel: 100 x 7 mm (cold ); 100 × 12 mm (warm) Round steel: 20 mm (cold ); 22 mm (warm) Square steel: 20 x 20 mm (cold); 22 × 22 mm (warm) Angle steel: 75 × 8 mm (cold, only with pre-notch); 100 × 12mm (warm, only with pre-notch) Weight(nett): 36 kg
METALTECH
Manual Tube Bender bending kit has everything that you need to make smooth bends. Simply mount the cast iron base onto your bench top or clamp it into a vice, and you are ready to bend 3/8, 1/2, 5/8, 9/16, 3/4, or 7/8 inch round, and 3/4 or 1 inch square tubing. This bending kit includes the base, extension handle, dies and a storage case.
Manual Tube Bender - Round & Square Part No.
Specifications:
MTTB22
Suitable for 1.2mm wall thickness in mild steel Includes round formers 3/8",1/2",9/16",5/8",3/4",7/8" Includes square formers 3/4" & 1"
METALTECH
23
www.navimportsaustralia.com.au
Metaltech Metal Working Machines All Industrial Duty Swivel Head Metal Cutting Band Saws have a heavy duty 240v/50hz 1100 watt highly efficient copper wound electric motor with long service life. Equipped with a no voltage release safety switch quality cast iron frame and bed, built in cooling system, ball bearing blade guides and 3 speed belt adjustment helps cut a wide range of materials. Hydraulic cylinder for automatic feed is fully adjustable with a automatic Shut Off switch.
Barcode: 9335319029994
Metal Cutting Band Saw - 370 Watt Product No. MTBS115
METALTECH
• Motor - 240v/370watt. • Automatic electric cut of switch. • Adjustable length stop for repetition job. • Table working height • 3 Speed pulley drive: 20, 30, 50 meter per min. • Max cutting cap: @90 degrees, round 110mm, rectangular 100X150mm • Max cutting cap: @45 degrees, round 100mm, rectangular 85X65mm • Blade size: L1640mm • Blade teeth: 10-14 TPI • Blade thickness: 0.65mm • Blade width: 13mm • Saw arch tilting range: 0-45 degree • Packing size: 965X410X500mm
Barcode: 9335319006261
Metal Cutting Band Saw - 750 Watt Product No. MTBS181 • Motor - 750watt • Blade Speed: 34, 41, 59 & 98 meter per min • Max cutting cap: round 180mm, square 180X305mm • Blade size: L2360mm, • Blade size teeth: 4-6 TPI • Blade size thickness: 0.9mm • Blade size width: 19mm • Saw arch tilting range: 0-45 degrees • Packing size: 1250X440X1080mm
METALTECH
Barcode: 9335319026320
Industrial Duty Swivel Head Metal 205 X 215mm Product No. MTBS8S Specifications:
METALTECH 24
Motor
240V / 50HZ 1100watt
Blade Size
2360mm x 20mm x 0.9mm
Blade Speeds
24, 41, 61, 82m/Min
Bow Swivel
-45º - +45º
Cutting Capacity at 0º Round Stock
205mm
Cutting Capacity at 0º Square Stock
205 x 215mm
Cutting Capacity at 45º round stock
135mm
Cutting Capacity at 45º Square Stock
205 x 115mm
Weight Net/Gross
165/200kgs
Packing Size
1230 x 650 x 820
www.navimportsaustralia.com.au
Metaltech Metal Working Machines Metaltech Heavy Duty Roller Stands are often used with bandsaws, cold saws and general workshop goods handling.
Metaltech Heavy Duty Roller Stand Part No.
MTRSF52
Metaltech Heavy Duty Roller Stand
Specifications:
Barcode:
• (1*)Maximum static load capacity: 500kg • (2*)Maximum working load capacity: 360kg • Packaged dimensions: 515(L)x515(W)x95(H)mm • Weight(net): 16kg
9335319026337
(1*)Maximum static load capacity is the maximum load that can be held in a fixed static position. This is also determined by the locking or mounting position of the stand. (2*)Working load capacity refers to: maximum load that can be held whilst mooving on the roller/s.
Part No.
MTRSV52
Specifications:
Barcode:
• (1*)Maximum static load capacity: 500kg • (2*)Maximum working load capacity: 360kg • Height adjustment: 580-970mm • Packaged dimensions: 515(L)x515(W)x95(H)mm • Weight(net): 17kg
9335319026559
(1*)Maximum static load capacity is the maximum load that can be held in a fixed static position. This is also determined by the locking position of the stand. (2*)Working load capacity refers to: maximum load that can be held whilst moving on the roller/s.
Metaltech Heavy Duty Roller Stands are often used with bandsaws, cold saws and general workshop goods handling.
Metaltech Heavy Duty Roller Stand (2 meter) Part No.
MTRST607
Specifications: • Capacity 800kg • Height adjustment 580-1030mm. • Bearing rollers 60mm. • Easy leveling adjustment facility on feet
Metaltech Heavy Duty Roller Stand (1 meter) Barcode:
9335319026351
Part No.
MTRST604
Specifications: • • • •
Capacity 800kgs. Height adjustment 580-1030mm. Bearing rollers 60mm. Easy leveling adjustment facility on feet.
Barcode:
9335319026559
25
www.navimportsaustralia.com.au
Metaltech ARC/TIG Welding Machines Metaltech ARC/TIG Welding Machines are suitable for high quality ARC/TIG welds on materials like Steel, Stainless Steel, Copper and Bronze. These machines are packed with features that make them suitable for light industrial, site repair and maintenance applications and come with all the accessories needed for the job. Barcode: 9335319007749
ACCESSORIES INCLUDED:
• 300A Earth Lead & Arc Lead x 2.8M • Cable, length: 2.8M • Quick connector plug: 10-25, 2pcs • Mask & Brush • Operations Manual
N11093
MTVO140 - Metaltech140 Digital Inverter Welder FEATURES:
SPECIFICATIONS:
• Latest IGBT inverter technology. • 140A MMA (stick electrode) • Hot start (improves electrode starting) • Excellent arc stability with all electrodes • DC Scratch TIG - Scratch Arc Ignition • Thermal overload protection • IP21S rating for environmental/safety protection • Generator compatible (recommend 6.5 KVA minimum) • Fitted with and approved to use domestic 10 Amp plug • 1 year limited warranty
Input Voltage: 240V 50HZ (+-15%) 10 Amp plug Rated Input Power: 4.1kW ieff Amps: 10A Rated Output: 140A/25.6V Welding Current Range: 10-140A No Load Voltage: 78 Duty Cycle: 40ºC - MMA 15% @ 140 Amps Dimensions: 295 x 135 x 270mm Weight(nett): 4Kg Approved to Australian Standard MTVO140
ACCESSORIES INCLUDED: • 300A Earth Lead & Arc Lead set x 2.8M • Cable, length: 2.8M • Quick connector plug: 10-25, 2pcs • Mask & Brush • Operations Manual
N11093
Barcode: 9335319007930
MTVO180 - Metaltech180 Digital Inverter Welder FEATURES:
SPECIFICATIONS:
• Latest IGBT inverter technology. • 180A MMA (stick electrode) • Hot start (improves electrode starting) • Excellent arc stability with all electrodes • DC Scratch TIG - Scratch Arc Ignition • Thermal overload protection • IP21S rating for environmental/safety protection • Generator compatible (recommend 6.5 KVA minimum) • Fitted with and approved to use domestic 15 Amp plug • 1 year limited warranty
Input Voltage 240V 50HZ (+-15%) 15 Amp plug Rated Input Power 6.2kW ieff AMPS: 13.1A Rated Output: 180A/27.2V Current Range: 10-180A No Load Voltage: 78 Duty Cycle 40ºC - MMA 15% @ 180 Amps Dimensions: 295 x 135 x 270mm Weight(nett): 4.2Kg Approved to Australian Standard MTVO180
MTPLASCUT40 Metaltech 40 Inverter Plasma Cutter The Metaltech plasma cutter efficiently cuts any electrically conductive material like steel, aluminium, stainless steel, copper or brass up to a thickness of 12mm. For use in fabrication, automotive repair, industrial construction and scrapping applications. ACCESSORIES:
• High-quality Plasma Torch and Cable: 4M • Earth Clamp and Cable: 3M • Air Regulator and Fitting
N11093
MTPLASCUT40 - Metaltech40 Inverter Plasma Cutter FEATURES:
SPECIFICATIONS:
• Latest Inverter Technology • Light industrial application • Strong metal housing • Tolerant to variable power supply • Suitable to cut all electrically conductive materials • HF Contact Arc Start • Tip can be contacted and dragged on cutting material • Light weight compact and portable • 1 year limited warranty
Input Voltage: 240V 50HZ (+-15%) 10 Amp plug Current Range: 15-35 Amp Duty Cycle (40°C, 10min): 30% @ 35A Rated input current: 21A Input Capacity: 5kW Max Load Voltage: 250V Max Cutting Thickness(mm): 10 Clean/12 Severance Dimensions: 460 x160 x 320mm Weight: 11.6Kg Approved to Australian Standard
SAFETY PRECAUTIONS:
PROPER EYE PROTECTION, LEATHER GLOVES, APRON AND JACKET ARE RECOMMENDED TO PREVENT BURNS FROM SPARKS OR DEBRIS.
26
MTPLASCUT40
www.navimportsaustralia.com.au
Metaltech Mig Welding Machines Metaltech Mig Welding Machines are suitable for high quality Mig welds on materials like Steel, Stainless Steel, Copper and Bronze. The burnback adjustment leaves the wire ready for the next weld. These machines come with all welding accessories necessary for the job and are suitable for light fabrication, maintenance and repairs.
ACCESSORIES INCLUDED: • Operations Manual • Euro Torch Connector and 300A earth clamp lead; 3M • Copper cable length: 3M • Gas Hose 2M • 450g Gasless Wire • 500g Solid Wire • Solid Wire V Roller • Knurled Roller Flux Core • Handle & Handle-cap • 2 Handle Screws • 2 Gas Hose clamps • Contact Tips (0.6, 0.8, 0.9)
N11093
Barcode: 9335319007725
- Metaltech140 Gas/Gasless MIG FEATURES:
SPECIFICATIONS:
• 120 Amp Gas or Gasless MIG(GMAW) • Euro Torch Connector • Spool Gun Ready - Suits 1 and 5kg spools • Connector Earth Lead(3 Metre) • Thermal Overload Protection • Six Step Output Control • Fan Cooling • MIG Torch with curved neck and hanging hook • 1 Year Limited Warranty • Variable Wire Speed Control
Input Voltage 240V 50HZ (+-15%) 10 Amp plug Max input effective Amps: 24A(+/-2A) Rated Input Power: 7.5kW Duty Cycle @ 40°C MIG: 10% @ 120A(+/-5%) Output Current Range: MIG: 35-120 Amps 6 Steps ieff MIG: 7.9A(+/-2.5A) Power factor: 0.67 Protection Class: IP21S Insulation Class: H MIG Wire Diameter Range: 0.6-0.8mm solid wire 0.6-0.9mm flux core wire For use with generators: Yes Dimensions: 485 x 205 x 320mm Weight(nett): 28Kg Approved to Australian Standard
MTMIG140
ACCESSORIES INCLUDED: • Operations Manual • Euro Torch Connector and 300A earth clamp lead; 3M • Copper cable length: 3M • Gas Hose 2M • 450g Gasless Wire • 500g Solid Wire • Solid Wire V Roller • Knurled Roller Flux Core • Handle & Handle-cap • 2 Handle Screws • 2 Gas Hose clamps • Contact Tips (0.6, 0.8, 0.9)
N11093
Barcode: 9335319007756
MTMIG180 - Metaltech180 Gas/Gasless MIG FEATURES:
SPECIFICATIONS:
• 180 Amp Gas or Gasless MIG(GMAW) • Euro Torch Connector • Spool Gun Ready - Suits 1 and 5kg spools • Connector Earth Lead (3 Metre) • Thermal Overload Protection • Six Step Output Control • Fan Cooling • MIG Torch with curved neck and hanging hook • 1 Year Limited Warranty • Variable Wire Speed Control
Input Voltage: 240V 50HZ (+-15%) 15 Amp plug Max input effective Amps: 38A(+/-2A) Rated Input Power: 7.5kw Duty Cycle @ 40°C (AS/NZ60974) MIG:10% @ 180A(+/-5%) Output Current Range MIG: 40-180 Amps 6 Steps ieff MIG: 12.5A ieff Max. MIG: 38A Power factor: 0.67 Protection Class: IP21S Insulation Class: H MIG Wire Diameter Range: 0.6-0.9mm solid wire 0.6-0.9mm flux core wire Thermal Overload Protected: Yes For use with generators: Yes Dimensions: 485 x 205 x 320mm Weight(nett): 32Kg Approved to Australian Standard
MTMIG180
27
www.navimportsaustralia.com.au
Metaltech Welding Accessories Metaltech Welding Accessories
METALTECH
Arrow Magnetic Welding Holder Small Part No.
Specifications:
Strong, powerful magnet encased in durable steel.Excellent for holding pipe and metal in an up right position. Used for welding, soldering, and assembly. Barcodes 85080
Capacity - 25 lbs (11.25kg)
9335319006971
85100
Capacity - 50 lbs (22.5kg)
9335319006988
85120
Capacity - 75 lbs (33.75kg)
93353119004601
Magnetic Ground Block Part No. 85245
Specifications: Quickly grounds arc welders when welding ferrous metals. Magnet grounds to surface to clamp. Size: 100mm diameter
Barcode 9335319004632
Mig Welding Pliers Part No.
85240
Specifications: Drop forged carbon steel. Spring loaded for easy operation. Use as a wire cutter for trimming mig wire or use the small and large holes to hold mig tips. Comfortable handle for extra gripping power. Size: 9� / 225mm
Barcode
9335319004625
Mig Welding Pliers Part No.
85238
Specifications: Manufactured from drop-forged heat treated steel Long, flat jaws ideal for holding and manipulating hot work pieces Ergonomic, double dipped cushion grip handles Overall length: 200mm (8") Jaw width: 87.5mm (3.5") Weight(nett): 400g
Barcode
9335319006179
Welders Chipping Hammer Part No.
85171
Specifications: Manufactured from drop-forged heat treated steel with heavy duty, spring loaded, ergonomic handle to reduce vibration when striking and cleaning up welding jobs. Hardened double ended head with both chisel and point. Weight(nett): 365g
Barcode
9335319020618
Barcode: 9335319004175
Deluxe Welding Cart Part No.
85167
28
Specifications: Top Tray - 450mm (L) x 290mm (W) Middle Tray - 380mm (L) x 290mm (W) Bottom Tray - 450mm (L) x 290mm (W) Back bottom Tray - 250mm (L) x 290 (W) Overall height - 700mm Capacity: 100lb / 45 kg
www.navimportsaustralia.com.au
Metaltech Industrial Bench Grinders and Disc Sander Metaltech Industrial Bench Grinders are manufactured from the highest quality, heavy duty components. This ensures reliability, dependability and a long life under all applications. N11093
Barcode: 9335319029048
MTBG625L Metaltech 150mm Industrial Bench Grinder FEATURES: • 240 volt/50hz, 450 watt copper wound induction motor with 10Amp plug • No voltage release magnetic safety switch • Industrial grade, adjustable protective eye shields included • Cast aluminium, fully adjustable tool rests, 1 with sharpening angle guide plate • Built in 12 volt, 10 watt work light • Built in coolant tray • Wheel dressing tool included • Pre-loaded, sealed bearings(no end play) for superior accuracy
Specifications: • No load speed: 2850 rpm • Grinding wheel size and grit: 150 x 25 mm (1) coarse #36 grit, (1) medium #60 • Shaft diameter(grinding wheel bore): 12.7mm (1/2") • Wheel locking nut thread size: M12 x 1.75 pitch • Weight(nett): 11.5kg
Barcode: 9335319006247
N11093
MTBG825L METALTECH 200MM INDUSTRIAL BENCH GRINDER Features: • 240 volt/50hz, 750 watt copper wound induction motor with 10Amp plug • No voltage release magnetic safety switch • Industrial grade, adjustable protective eye shields included • Cast aluminium, fully adjustable tool rests, 1 with sharpening angle guide plate • Built in 12 volt, 10 watt work light • Built in coolant tray • Wheel dressing tool included • Pre-loaded, sealed bearings(no end play) for superior accuracy
Specifications: • No load speed: 2850 rpm • Grinding wheel size and grit: 200 x 25mm (1) coarse #36 grit and medium #60 grit • Shaft diameter(grinding wheel bore): 16mm (5/8") • Wheel locking nut thread size: M16 x 2.0 • Weight(nett): 19kg
The Metaltech Industrial Disc Sanders are manufactured from the highest quality, heavy duty components. This ensures reliability, dependability and long life under all applications. N11093
Barcode: 9335319006322
MTDS300 Metaltech 300mm Industrial Disc Sander Features: • 240 volt/50hz 900 watt induction motor with direct drive and 10Amp plug • Table mounted 120° mitre guide included • Adjustable table with 90° quick set design • Strong iron motor base with 52mm dust port for connection direct to a workshop dust extractor(not included) • 435 x 210mm aluminium side work table tilts from 0 to 45 ° • Manual brake quick disc stop after power off
Specifications: • No load speed: 2850 rpm • Disc size: 305mm • Weight(nett): 30kg
29
www.navimportsaustralia.com.au
The Metaltech Industrial Belt, Disc Sander & Wet Sharpener The Metaltech Industrial Belt and Disc Sander is designed for bench top application. Manufactured from the highest quality industrial components for use by the professional or serious handyman. N11093
Barcode: 9335319029055
MTBDS46 Metaltech Industrial Belt And Disc Sander Features: • 240 volt/50hz copper wound 550 watt continuous load electric motor with 10 Amp plug • Strong cast iron base • Belt table can be used both vertically and horizontally • Quick belt replacement mechanism with easy belt tracking control • Aluminium work table tilt 0 - 45°, sanding belt table 0- 90°
Specifications: • No load speed: 2850 rpm • Sanding disc size: 150mm • Sanding belt size: 100 x 914mm • Belt speed: 7.3 Meters/per sec • Weight(nett): 19.5
To achieve a professional sharpening result and maintain a long lasting sharpened edge the wet sharpening process is essential. The need to maintain the temper of the steel can only be made possible during the process of sharpening the blade if it is not overheated. The Metaltech professional wet sander is the answer to solve this problem as it maintains the temperature of the steel, at a uniform rate, thereby retaining the steel temper. T his results in not only a more professional sharpening job, but a longer lasting one as well. N11093
Barcode: 9335319028843
MTWS250 250mm Metaltech Professional Wet Sharpener Features: • Unique 240 volt/50hz 180 watt copper wound, twin direction running electric motor • K220 grit aluminium oxide grindstone • Leather honing wheel for the professional finish and to maintain longevity • Built in cooling water reservoir • Universal tool support and angle guide included
Specifications: • Overall dimensions: 395 x 375 x 370mm • No load speed: 95 rpm(twin direction) • Grinding stone size: 250 x 50 x 12mm • Leather honing wheel size: 200 x 30 x 12mm • Weight(nett): 17.5kg
An ideal accessory for your bench grinder. For the safe and practical mounting of bench grinders not only to free up bench space, but to create a safe, neat and self-contained grinding section in the workshop.
MTBGS910 Metaltech Delux Bench Grinder Stand Features: • Ultra-strong cast iron base, fully floor mountable • Suits both 150mm and 200mm bench grinders • 315 x 250 mm metal table with elongated mounting holes suits most brands of grinders • Adjustable working heights from 710 - 910mm • Handy spare grinding wheel holders • Coolant and parts tray
Specifications: • Overall dimensions: 278 x 245 x 740mm • Table dimensions: 315 x 250mm • Mounting hole centres: 190 to 325mm • Weight(nett): 10.5kg
30
www.navimportsaustralia.com.au
Industrial & Vertical Sandblasting Cabinets Barcode: 9335319003772
Industrial Sandblaster Cabinet Part No.
Features & Specifications: Bench top design sandblasting cabinet for general blasting of materials when space is limited and still no mess is required. Features: • Pistol- grip blasting gun with interchangeable ceramic nozzles • Powder coated steel construction, rugged and portable • Single acrylic windowed door/lid hinged with metal brace • Fluorescent lighting system
15100
Specifications: • Approximate inside cabinet size (LxWxH)590x500x300-360mm • Floor space with door/lid open (LxWxH)700x500x930mm • Minimum free air delivery required 254L/min @100 PSI at the machine entry point. • Vacuum extraction and filter system recommended but not included • Weight(nett): 19KG
Barcode: 9335319006803
Vertical Sandblasting Cabinet Part No.
Features & Specifications: Freestanding sandblasting cabinet for general blasting of materials in the enclosed cabinet with no mess.
15115
Features: • Pistol- grip blasting gun with interchangeable ceramic nozzles • Transparent viewing screen with replaceable film, gloves and gun • Single hinged side door with safety interlock for easy access • Powder coated steel construction • Fluorescent lighting system Specifications: • Approximate inside cabinet size: (LxWxH) 835x 510x 360-550mm • Floor space with door open: (LxWxH) 1430x 580x 1400mm • Minimum free air delivery required: 340l/ min @100 PSI at the machine entry point • Vacuum extraction and filter system recommended but not included • Weight(nett): 50kg
Barcode: 9335319007312
Industrial Sandblaster Cabinet Part No.
15350
Features & Specifications: • Industrial quality pistol- grip blasting gun with interchangeable ceramic nozzles • Tempered glass viewing screen with replacement shields, gloves and gun • Two hinged side doors with safety interlocks for easy access • Underbelly hopper stores and recirculates blast media • LED control panel • Powder coated steel construction • Built in vacuum and filter system • Fluorescent lighting system • Includes air regulator • Approximate inside cabinet size: (LxWxH) 940x600x340-580mm(with doors closed) • Floor space with doors open (LxWxH) 2070x970x1650mm • Minimum free air delivery required 340L/ min @100 PSI at the machine entry point • Weight(nett): 105kg
31
www.navimportsaustralia.com.au
Industrial Sandblasting Cabinet Barcode: 9335319007329
Industrial Sandblaster Cabinet Part No.
Features & Specifications: Freestanding industrial style sandblasting cabinet for general blasting of materials in the enclosed cabinet with no mess.
15420
Features: • Industrial quality pistol- grip blasting gun with interchangeable ceramic nozzles • Extra heavy duty foot valve assembly allows pedal operation and media delivery • Powder coated steel construction • Heavy duty windowed door/ lid with gas struts, two safety locks and two side doors • Built in vacuum and filter system • Includes air regulator • Fluorescent lighting system • Underbelly hopper stores and recirculates blast media Specifications: • Approximate inside cabinet size: (LxWxH) 1200x 600x 340- 570mm with doors/lid closed • Floor space with doors/ lid open: • (LxWxH) 2340x 950x 1650mm • Minimum free air delivery required: 680L/min @100 PSI at the machine entry point • Weight(nett): 165kg
Barcode: 9335319009668
Industrial Sandblasting Cabinet Part No.
Features & Specifications: Freestanding sandblasting cabinet for general blasting of materials in the enclosed cabinet with no mess.
15990
Features: • Industrial quality pistol- grip blasting gun with interchangeable ceramic nozzles • Extra heavy duty foot value assembly allows pedal operation and media delivery • Powder coated steel construction • Heavy duty windowed door/lid with gas struts and two safety locks • Built in vacuum and filter system • Fluorescent lighting system • Underbelly hopper stores and recirculates blast media Specifications: • Approximate inside cabinet size (LxWxH)1175x885x625- 845 mm with door/lid closed • Floor space with doors/lid open (LxWxH) 1320x1200x2170mm • Minimum free air delivery required 680L/M @100 PSI at the machine entry point • Weight(nett): 175kg
32
www.navimportsaustralia.com.au
Metaltech Industrial Sandblaster Cabinet & Accessories MTSBC880 Metaltech 880 Litre Industrial Sandblaster Cabinet with Paralleled Working Position FEATURES:
• Industrial quality pistol - grip blasting gun with interchangeable ceramic nozzles • Extra heavy duty foot valve assembly allows pedal operation and media delivery • Powder coated steel construction • Heavy duty windowed door/ lid with gas struts, two safety locks & two side doors • Built in vacuum and filter system • Includes air regulator • Fluorescent lighting system • Underbelly hopper stores and recirculates blast media
SPECIFICATIONS:
• Approximate inside cabinet size (LxWxH) 600 x 1950 x 340- 570mm with doors/lid closed • Floor space with doors/lid closed (LxWxH) 991 x 2000 x 1738mm • Minimum free air delivery required 680L/min @ 100 PSI at the machine entry point • Weight(nett): 155kg
VACUM MOTOR AND AIR FILTER
PRESSURE GAUGE AIR REGULATOR
HAND HELD BLAST GUN
FOOT PEDAL OPERATION
2060(w)mm
991(w)mm
680(w)mm 1738(h) 1531(h)
675(w)mm
MTSBH1 Metaltech Sandblaster Hood Media Mask FEATURES:
• Heavy-duty durable fabric with synthetic leather construction • Adjustable internal helmet for added comfort • Large 120 x 60mm acrylic viewing plate for maximum visibility and protection • Reinforced side ventilation panels for increased air flow • Internal heavy duty hard hat for additional protection
33
www.navimportsaustralia.com.au
Sand & Soda Blasters Ideal for situations where rust and paint removal is required on multiple surfaces. For Sandblasting materials on the move. These portable kits provide versatility and maneuverability to take on small and large jobs alike. Barcode: 9335319004199
10(38lt) Gallon Portable Sandblaster Kit Part No.
15009
Features & Specifications: • “Ready to Blast” kit includes safety mask, thread tape, sand funnel and 4 ceramic nozzle tips (2.4,2.7,3.2 and 3.6mm) • Hose length 300cm with hand held 13mm media delivery nozzle • Heavy duty fully welded, powder coated tank and frame with rubber grip handles • 5” heavy duty rubber wheels give the unit complete mobility • Minimum free air delivery required 340L/ min @90 PSI at the machine entry point • Media use 30-80 KG @ 125PSI (dependant on nozzle size) • Weight (nett) 23KG • Spare nozzle 4 pack (part no: 10460) (1 of EA 1.8, 2.3, 2.8 and 3.3mm)
Barcode: 9335319006780
20(76lt) Gallon Portable Sandblaster Kit Part No.
Features & Specifications:
15020
• “Ready to Blast” kit includes safety mask, thread tape, sand funnel and 4 ceramic nozzle tips (2.0, 2.5, 3, 3.5mm) • Hose length 300cm with dead man media delivery nozzle • Heavy duty fully welded, powder coated tank and frame with rubber grip handles • 5” heavy duty rubber wheels give the unit complete mobility • Minimum free air delivery required 10 LFM @90 PSI at the machine entry point • Media use 30- 80kg @125 PSI (Dependant on nozzle size) • Weight(nett):26kg • Spare nozzle 4 pack (part no: 15020N) (1 of EA 2.0, 2.5, 3 and 3.5mm)
Barcode: 9335319002119
28 Gallon Vacuum Sandblaster Part No.
Features & Specifications:
15025
Features: • Built in powerful 1200 Watt vacuum motor • Unique system separates abrasives from debris and recycles abrasive media for reuse. • 105 litre/ 28 gallon heavy duty welded powder coated tank • Extremely maneuverable and efficient 6” rear wheels and swivel front castors. • 240V 1200 watt vacuum motor • Tank size 41” (1030mm) x 15” (375mm) diameter • Minimum free air delivery required 640L/min @ 115 PSI at the machine entry point • Air inlet 1/2 NPT • Weight(nett): 32KG
Barcode: 9335319018646
76 Litre Dual Tank Abrasive/Soda Blaster Part No.
15005
Features & Specifications: • Each tank will hold 100lbs of media • Heavy duty fully welded, powder coated tanks and frame • Unique mixing value allows a change from soda to abrasive media at the flick of the valve • 300cm length hose with hand held media delivery nozzle • Minimum free air delivery required, 340L/min @120 PSI at the machine entry point • Weight(nett): 38KG
34
www.navimportsaustralia.com.au
Metaltech 7 Gallon Portable Soda Blaster MTSB07G Metaltech 7 Gallon (26.5Lt) Portable Soda Blaster APPLICATION:
Soda (bicarbonate of soda-based media) blasting is a low-impact, Eco-friendly way to clean a variety of surfaces. It facilitates a chemical free stripping of rust, paint, mould and even graffiti with minimum harm to the original surface material. It is even suitable for most fibreglass surfaces. This lightweight, robust and portable unit is suitable for both the professional and serious home handyman by delivering versatility and maneuverability to take on small and large jobs alike.
FEATURES:
• Heavy duty, fully welded steel construction with powder coated finish to tank and frame for corrosion resistance. • 40 lb tank capacity. • 6” heavy duty rubber wheels give the unit complete mobility • Unique dual adjustable, hand held nozzle with replaceable ceramic tips, enables both media and air pressure delivery to be adjusted precisely. • Air pressure regulator with inbuilt moisture trap included.
AIR REGULATOR MEDIA REGULATOR
SPECIFICATIONS:
• Minimum free air delivery required 280 Lt / min @ 90 psi • Working pressure 35 - 90 psi • Delivery nozzle hose length 1500mm • Single packed carton dimensions (L x W x H) 680 x 265 x 345 mm • Weight (nett) 13kg
335mm
795mm
SODIUM BICARBONATE MEDIA ONLY
328(w)mm
MTSB01 Metaltech Hand Held Soda Blaster
400(w)mm
FEATURES:
Heavy duty polypropylene resin and steel construction Ergonomically lightweight one handed operation with air pressure control 5mm replaceable, adjustable metal nozzle allows narrow or wide pattern for media delivery 1 litre tank capacity
SPECIFICATIONS:
Minimum free air delivery required: 8.5 Cfm @ 90psi Working pressure: 35 - 90 psi Packaged dimensions (L X W X H): 290 × 95 × 200mm Weight packaged(nett): 1/2 kg
35
www.navimportsaustralia.com.au
Metaltech Replacement Nozzle Sets Metaltech Nozzle Sets are used to replace worn or damaged nozzles on sandblaster guns and valves. These sets are designed for efficent sandblasting, with liquid or air cleaning of parts or surfaces.
4Pc Replacement Nozzles To Suit 15009 Part No. 10460
Specifications: Sizes - 2.4, 2.7, 3.2 and 3.6mm Suits: 15009 - 10 Gallon Portable Sandblaster Kit
4Pc Sandblasting Ceramic Nozzles to Suit 15420 and 15990 Part No.
10469
Specifications: Abrasives which can be used are; Garnet, Glass beads, Aluminium oxide and Walnut shell. Suits: • 15420 & 15990- Industrial Sandblaster Cabinet • Sizes: 6mm, 7mm • Nozzle length: 35mm X 21mm diameter. • Two of each sizes in one pack
4 Pc Ceramic Nozzles To Suit 15020 & 15005 Part No. 10462
Specifications: Ideal replacement nozzles for: • 15020 - 20 Gallon Portable Sandblaster Kit • 15005 - 76 Litre Dual Tank Abrasive/Soda Blaster • Nozzle sizes: 2 mm, 2.5 mm, 3 mm and 3.5 mm
10470-2Pc 6mm Sandblasting Ceramic Nozzles for 15420 & 5990 10471-2Pc 7mm Sandblasting Ceramic Nozzles for 15420 & 15990 Part No.
Ceramic Nozzle to Suit 15025 Part No. 10464
Specifications:
Part No.
10466
36
10470
10471
Abrasives which can be used are; Garnet,Glass beads, Aluminium oxide, Walnut shell Suits: 15420 & 15990- Industrial Sandblaster Cabinet Sizes: 6mm, 7mm Nozzle length: 35mm X 21mm diameter Two in a pack.
This Ceramic Nozzle Set is used to replace worn or damaged nozzles on a sandblaster guns and valves. To suit 15025 - 28 Gallon Vacuum Sandblaster
4 Pc Ceramic Nozzle Set to Suit 15100, 15115 and 15350 Specifications: Durable ceramic construction. Ideal replacement nozzles for: • 15100 - Bench Top Sandblasting Cabinet • 15115 - Vertical Sandblasting Cabinet • 15350 - Industrial Sandblaster Cabinet • Nozzle Sizes: 4.5,5,6 & 7mm
Specifications: Abrasives which can be used are; Garnet, Glass beads, Aluminium oxide and Walnut shell. Suits: • 15420 & 15990- Industrial Sandblaster Cabinet • Sizes: 6mm, 7mm • Nozzle length: 35mm X 21mm diameter • Two in a pack.
Metaltech 2 Piece Soda Blaster Replacement Nozzle Set Part No.
Specifications:
10472
• Metaltech 2 Piece Soda Blaster Replacement Nozzle Set • Two replacement ceramic nozzles • To suit MTSB07G - Metaltech 7 Gallo Portable Soda Blaster • Sizes 2.0mm and 2.5mm
www.navimportsaustralia.com.au
Deadman Safety Gun, Replacement Nozzles & Sandblaster Accessories The Metaltech Sandblasting Deadman Safety Gun is the gun you need when safety is your top priority. The gun switches off once the trigger is released to prevent accidents in the event of the operator losing control of the unit. It also assists in conserving media as there's no need to switch off the air pressure at the cabinet or blasting pot. Just release the trigger and the gun stops spraying.
Air Sand Blasting Deadman Gun w/4 Ceramic Nozzles Tips Part No.
10520
Specifications: • Fast on/off • Spring loaded paddle trigger • Conserves media and reduces mess • Nonslip vinyl grip • Nozzle sizes: 2 mm, 2.5 mm, 3 mm and 3.5 mm • Air inlet: 1/4'' NPT • Blocks and seals the grit flow immediately when the handle is released. • Fits Most Pressure & Cabinet Sandblasters • Adaptor may be needed to fit some models of sand blaster
Rubber Pad To Suit 10520 Part No. 15020PAD
Specifications: Replacement Rubber Pad to suit: • 10520 - Air Sand Blasting Deadman Gun W/4 Ceramic Nozzles Tips
Quality, genuine spare part replacement sandblaster guns.
Replacement Sandblaster Gun To Suit 15100 Part No. 10530
Specifications: To suit: 15100 - Bench Top Sandblasting Cabinet 15115 - Vertical Sandblasting Cabinet (replacement nozzles not included).
Siphon Feed Abrasive Blasting Kit Part No. 10542
Specifications: Air consumption: 8CFM Inlet: 1/4" NPT (fitting supplied) Weight(net): 1.5kg
Replacement Sandblaster Gun for 15350, 15420, 15990 Part No. 10535
Specifications: To suit: 15100 - Bench Top Sandblasting Cabinet 15115 - Vertical Sandblasting Cabinet (replacement nozzles not included).
37
www.navimportsaustralia.com.au
Garnet Mesh, Glass Beads & Sodium Bicarbonate Soda Garnet Mesh Grit 25kg & 1000kg Specifications: Used in suction guns, pressure pots, sandblasting cabinets etc for the removal of rust, paint and mill space on metal, wood plastic and many more surfaces. Ideal for preparing surface for painting or priming. Grade garnet free of Airborne Silica. 15000
30-60 GRIT 25KG
15003
30-60 GRIT 1000KG (TONNE)
Glass Beads are used for sandblasting to clean any surface on products such as metal, wood, plastic & many more. Ideal for removal of rust & paint ready for repainting.
Glass Beads 106-300 Micron 25kg Part No.
15001
Specifications: Glass Beads Use: • Sandblast Cabinets • Pressure Pots • Suction Guns • Glass Beads Removal of Rust/Paint • Grade; Medium No.4/106-300 Micron/Inda • Weight 25kg
Soda Blasting Equipment uses the soda as abrasive and is most cost effective way to remove the stains and dirt from the objects without damaging their original shape. Sodium Bicarbonate is most commonly used for removing paint from thin or precious materials like alloy, aluminium etc. The sodium bicarbonate used for industrial soda blasting is a larger granule than the type that is in your kitchen. Soda Bi Carbonate explodes on surface impact and turns into powder. Baking soda is softer than other sand blasting abrasives. Barcode: 9335319005004
Sodium Bicarbonate Ultra Coarse Soda Part No.
15002
38
Specifications: Soda blasting is environmentally friendly. Sandblasting with soda is completely harmless and highly effective in removing paint to prepare the surface for painting. Soda blasting Blast Media Use: • Sandblast Cabinets • Pressure Pots • Suction Guns • Glass Beads Removal of Rust/Paint • Grade; Ultra course
www.navimportsaustralia.com.au
Sandblaster Accessories
Vacuum Motor To Suit 15025 Part No. 15025#33
Blast Gun Body To Suit 15025
Specifications:
Part No.
Specifications:
Vacuum Motor To Suit 15025 - 28 Gallon Vacuum Sandblaster
15025#9
Blast Gun Body to suit 15025 - 28 Gallon Vacuum Sandblaster
Blast Head To Suit 15025
Brush Head to Suit 15025
Part No.
Specifications:
Part No.
Specifications:
15025#8
Blast Head to suit 15025 - 28 Gallon Vacuum Sandblaster
15025#7
Brush Head to suit 15025 - 28 Gallon Vacuum Sandblaster
Quality, genuine spare part replacements to suit Metaltech Sandblasters.
Adaptor to Suit 15100 Part No. 15100A
Fluro Light to Suit 15100 Specifications:
Adaptor to suit 15100 - Bench Top Sandblasting Cabinet
Part No. 15100F
Specifications: Fluro Light to suit 15100 - Bench Top Sandblasting Cabinet
These Heavy duty sandblast gloves are manufactured to the highest quality from latex & are designed specifically to protect your hands while operating any sandblasting cabinet.
Sandblasting Gloves to Suit 15100 & 15115 Part No. 15100G
Specifications: Glove Dimensions, Length: 450mm Diameter Opening: 160mm ID Glove Thickness: 1mm
Sandblasting Gloves to Suit 15350 & 15420 Part No. 15350G
Specifications: Glove Dimensions Length: 600mm Diameter Opening: 200mm ID Glove Thickness: 1mm
39
www.navimportsaustralia.com.au
Sandlblaster Accessories Quality, genuine spare part replacements to suit Metaltech Sandblasters. Sandblasting Gloves to Suit 15100 & 15115 Part No. 15100G
Specifications: Glove Dimensions, Length: 450mm Diameter Opening: 160mm ID Glove Thickness: 1mm
Sandblasting Gloves to Suit 15350 & 15420 Part No. 15350G
Specifications: Glove Dimensions Length: 600mm Diameter Opening: 200mm ID Glove Thickness: 1mm
Protective Work Shield Film Part No.
Specifications: Protective work shields are used to protect Perspex and glass from abrasive media used in sand blasting cabinet.
15100W
Used for: 15100 - Bench Top Sandblasting Cabinet Size: 400(w) x 300mm
15115W
To suit: 15115 - Vertical Sandblasting Cabinet Size: 550(w) x 250mm
Protective Work Shield Film to Suit 15990 Part No.
Specifications:
Protective work shields are used to protect Perspex and glass from abrasive media used in sand blasting cabinet. 15990W
Protective Work Shield Film to Suit 15420 & 15350
Barcode: 9335
Part No.
Hose to Suit 15420 Part No. 15420H
To suit: 15990 - Industrial Sandblasting Cabinet Size:660(w) x 300mm
Features & Specifications: Hose to suit: 15420 - Industrial Sandblaster Cabinet
Specifications: Protective work shields are used to protect Perspex and glass from abrasive media used in sand blasting cabinet.
15420W
To suit: • 15350 - Industrial Sandblaster Cabinet • 15420 - Industrial Sandblaster Cabinet • Sizes: 550(w) x 250mm and 595(w) x100mm
Grip Replacement Foot Pedal Assembly Part No.
Specifications:
15350FP
Quality, genuine spare part replacement foot pedal assembly to suit: 15350 - Industrial Sandblaster Cabinet 15420 - Industrial Sandblaster Cabinet 15990 - Industrial Sandblasting Cabinet MTSBC880 - Metaltech 880 Litre Industrial Sandblaster Cabinet
40
Valve And Gauge to Suit 15420 Part No. 15420V
Specifications: Valve and Gauge to suit: 15420 - Industrial Sandblaster Cabinet
www.navimportsaustralia.com.au
Grip Castors and Wheels AAA RED SERIES EXTREME HEAVY DUTY fabricated steel componentry with black zinc finish for corrosion resistance. Cast iron double ball bearing core centered wheel with moulded polyurethane outer. Suitable for mobile platforms, heavy machinery, warehouse equipment, transport and logistics applications that require the shock protection of the moulded polyurethane outer and a towable option. POLYURETHANE CAST IRON WHEEL CASTORS(FIXED)
GRIP INDUSTRIAL AAA RED SERIES
MAX.* Load Cap.
Height (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
150x50
1000
206
149x110x8
113x70
25x13(S*)
200x63
1400
264
174x174x10
140x140
15(R*)
CASTOR
Diameter (mm)
41948 41949
Bearings
CASTOR
Axle Diameter(mm)
Component Bracket Thickness(mm)
41948
16
8
41949
16
10
POLYURETHANE CAST IRON WHEEL CASTORS(SWIVEL)
GRIP INDUSTRIAL AAA RED SERIES
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
150x50
1000
206
43
149x110x8
113x70
25x13(S*)
200x63
1400
264
56
174x174x10
140x140
15(R*)
CASTOR
Diameter (mm)
41950 41952
Bearings
CASTOR
Axle Diameter(mm)
Component Bracket Thickness(mm)
41950
16
8
41952
16
10
POLYURETHANE CAST IRON WHEEL CASTORS(SWIVEL/BRAKE)
GRIP INDUSTRIAL AAA RED SERIES
OUTSIDE DIAMETER WIDTH
BALL BEARINGS
ROLLER BEARING
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
150x50
1000
206
46
149x110
113x70
25x13(S*)
200x63
1400
264
59.5
174x174
140x140
15(R*)
CASTOR
Diameter (mm)
41953 41954
Bearings
CASTOR
Axle Diameter(mm)
Component Bracket Thickness(mm)
41953
16
8
41954
16
10
AXLE ON WHEEEL ONLY
BOLT HOLE SP(mm) Spacing
* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)
41
www.navimportsaustralia.com.au
Grip Castors and Wheels AAA GREY SERIES EXTREME HEAVY DUTY fabricated steel componentry with black zinc finish for corrosion resistance. Full cast iron, double ball bearing core centered wheel. Suitable for use on automotive assembly lines, aviation trolleys and in production manufacturing plants. CAST IRON WHEEL CASTORS(FIXED)
GRIP INDUSTRIAL AAA GREY SERIES
CASTOR
Diameter (mm)
41961 41963
MAX.* Load Cap.
Height (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
150x50
1400
206
149x110x8
113x70
25x13(S*)
200x63
1600
264
174x174x10
140x140
15(R*)
Bearings
CASTOR
Axle Diameter(mm)
Component Bracket Thickness(mm)
41961
16
8
41963
16
10
CAST IRON WHEEL CASTORS(SWIVEL)
GRIP INDUSTRIAL AAA GREY SERIES
CASTOR
Diameter (mm)
Bearings
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm) (mm)
41964
150x50
1400
206
43
149x110x8
113x70
25x13(S*)
41966
200x63
1600
264
56
174x174x10
140x140
15(R*)
CASTOR
Axle Diameter(mm)
Component Bracket Thickness(mm)
41964
16
8
41966
16
10
CAST IRON WHEEL CASTORS(SWIVEL/BRAKE)
GRIP INDUSTRIAL AAA GREY SERIES
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
150x50
1400
206
43
149x110x8
113x70
25x13(S*)
200x63
1600
264
59.5
174x174x10
140x140
15(R*)
CASTOR
Diameter (mm)
41967 41968
Bearings
CASTOR
Axle Diameter(mm)
Component Bracket Thickness(mm)
41967
16
8
41968
16
10
AAA BLACK SERIES Heavy duty gal plated fabricated steel componentry with full cast iron, fitted grease nipple, solid roller bearing wheel. Ideal for external skip and general rubbish bin applications. GRIP INDUSTRIAL BLACK SERIES CASTOR WITH FULL CAST IRON WHEEL(SWIVEL)
43022
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
102x50
300
135
20
115x100
85x73
20x11(S*)
152x50
600
189
31
115x100
85x73
20x11(S*)
CASTOR
Diameter (mm)
43022 43032
Bearings
43032
* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)
42
www.navimportsaustralia.com.au
Grip Castors and Wheels CASTOR WITH FULL CAST IRON WHEEL(FIXED)
43021
MAX.* Load Cap.
Height (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
102x50
300
135
115x100
85x73
20x11(S*)
152x50
600
189
115x100
85x73
20x11(S*)
CASTOR
Diameter (mm)
43021 43029
Bearings
43029
RED SERIES 1 Gal plated fabricated steel componentry with cast iron, fitted grease nipple, roller bearing core centred wheel with moulded polyurethane outer. PU MOULDED CAST IRON WHEEL CASTOR(FIXED)
GRIP INDUSTRIAL RED SERIES 1
GRIP INDUSTRIAL RED SERIES 1
GRIP INDUSTRIAL RED SERIES 1
GRIP INDUSTRIAL RED SERIES 1
MAX.* Load Cap.
Height (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
100x50
230
135
115x100
85x73
20x11(S*)
125x50
280
159
115x100
85x73
20x11(S*)
CASTOR
Diameter (mm)
43037 43016
Bearings
43039
152x50
360
189
115x100
85x73
20x11(S*)
43041
200x50
480
235
115x100
85x73
20x11(S*)
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
PU MOULDED CAST IRON WHEEL CASTOR(SWIVEL) CASTOR
Diameter (mm)
43036
100x50
230
135
20
115x100
85x73
20x11(S*)
43033
125x50
280
159
20
115x100
85x73
20x11(S*)
43038
125x50
360
189
31
115x100
85x73
20x11(S*)
43040
200x50
460
235
39.5
115x100
85x73
20x11(S*)
Bearings
PU MOULDED CAST IRON WHEEL CASTOR(SWIVEL/BRAKE) CASTOR
Diameter (mm)
43035
100x50
Bearings
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
230
135
20
115x100
85x73
20x11(S*)
43034
125x50
280
159
20
115x100
85x73
20x11(S*)
43039A
152x50
360
189
31
115x100
85x73
20x11(S*)
100MM PU MOULDED CAST IRON REPLACEMENT WHEEL CASTOR
Diameter (mm)
Roller Bearings
MAX.* Load Cap.
Hub
Bore Diameter(mm)
Width (mm) 52160
100x50
230
62.5
13
52161
125x50
280
62.5
13
52162
152x50
400
62.5
13
52163
200x50
500
62.5
13
* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)
43
www.navimportsaustralia.com.au
Grip Castors and Wheels RED SERIES 2 Gal plated fabricated steel componentry with polypropylene core centred, roller bearing wheel with moulded polyurethane outer. GRIP INDUSTRIAL RED SERIES 2
PU CASTOR MOULDED PP CORE(R)(FIXED) CASTOR
Diameter (mm)
Bearings
MAX.* Load Cap.
Height (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
42091
100x50
230
135
115x100
85x73
20x11(S*)
42094
125x50
250
159
115x100
85x73
20x11(S*)
42097
125x50
300
189
115x100
85x73
20x11(S*)
PU CASTOR MOULDED PP CORE(R) (SWIVEL)
GRIP INDUSTRIAL RED SERIES 2
GRIP INDUSTRIAL RED SERIES 2
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
100x50
230
135
20
115x100
85x73
20x11(S*)
42095
125x50
250
159
30
115x100
85x73
20x11(S*)
42098
152x50
300
189
31
115x100
85x73
20x11(S*)
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
CASTOR
Diameter (mm)
42092
Bearings
PU CASTOR MOULDED PP CORE(R) (SWIVEL/BRAKE) CASTOR
Diameter (mm)
42093
100x50
200
135
20
115x100
85x73
20x11(S*)
42096
125x50
250
159
30
115x100
85x73
20x11(S*)
42099
152x50
300
189
31
115x100
85x73
20x11(S*)
Bearings
RED SERIES 3 Black baked enamel finished fabricated steel componentry with steel core centred, solid rubber outer wheel with double ball bearings. GRIP INDUSTRIAL RED SERIES 3
GRIP INDUSTRIAL RED SERIES 3
RUBBER STEEL CORE CASTOR(FIXED) CASTOR
Diameter (mm)
42087 42089
MAX.* Load Cap.
Height (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
160x50
150
192
115x100
85x73
20x11(S*)
206x58
235
238
115x100
85x73
20x11(S*)
Bearings
RUBBER STEEL CORE CASTOR(SWIVEL) MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
160x50
150
192
31
115x100
85x73
20x11(S*)
206x58
235
238
39.5
115x100
85x73
20x11(S*)
CASTOR
Diameter (mm)
42088 42090
Bearings
* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)
44
www.navimportsaustralia.com.au
Grip Castors and Wheels RED SERIES 4 Pressed steel, gal plated componentry with aluminum core centred, ball bearing wheel with moulded polyurethane outer and 2 piece dust cover. PU MOULDED ALUMINIUM CORE CASTOR(FIXED)
GRIP INDUSTRIAL RED SERIES 4
CASTOR
Diameter (mm)
41994 41997
MAX.* Load Cap.
Height (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
160x50
150
192
115x100
85x73
20x11(S*)
125x38
250
154
105x88
80x60
9x10.5(S*)
Bearings
PU MOULDED ALUMINIUM CORE CASTOR(SWIVEL)
GRIP INDUSTRIAL RED SERIES 4
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
100x36
200
128
36
106x86
80x60
9.5x11.5(S*)
125x38
250
153
39
106x86
80x60
9.5x11.5(S*)
CASTOR
Diameter (mm)
41995 41998
Bearings
PU MOULDED ALUMINIUM CORE CASTOR(SWIVEL)
GRIP INDUSTRIAL RED SERIES 4
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
100x36
200
128
40
106x86
80x60
9.5x11.5(S*)
125x38
250
153
39
106x86
80x60
9.5x11.5(S*)
CASTOR
Diameter (mm)
41996 41999
Bearings
PU MOULDED PP CORE(B) CASTOR(FIXED)
GRIP INDUSTRIAL RED SERIES 4
MAX.* Load Cap.
Height (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
100x36
200
154
105x87
80x60
9x10.5(S*)
125x38
200
154
106x87
80x60
9x10.5(S*)
CASTOR
Diameter (mm)
41988 41991
Bearings
PU MOULDED PP CORE(B) CASTOR (SWIVEL)
GRIP INDUSTRIAL RED SERIES 4
OUTSIDE DIAMETER WIDTH
BALL BEARINGS
ROLLER BEARING
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
100x36
150
128
36.5
106x86
80x60
9.5x13.5(S*)
125x38
200
153
39
106x86
80x60
9.5x13.5(S*)
CASTOR
Diameter (mm)
41989 41992
AXLE ON WHEEEL ONLY
Bearings
BOLT HOLE SP(mm) Spacing
* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)
45
www.navimportsaustralia.com.au
Grip Castors and Wheels PU MOULDED PP CORE(B) CASTOR(SWIVEL/BRAKE)
GRIP INDUSTRIAL RED SERIES 4
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
100x36
150
128
40
106x86
80x60
9.5x13.5(S*)
125x38
200
153
39
106x86
80x60
9.5x13.5(S*)
CASTOR
Diameter (mm)
41990 41993
Bearings
100MM PU MOULDED CAST IRON REPLACEMENT WHEEL
GRIP INDUSTRIAL RED SERIES 4
CASTOR
Diameter (mm)
Ball Bearings
MAX.* Load Cap.
Hub
Bore Diameter(mm)
Width (mm) 52164
100x36
2000
51
10
52165
125x38
3000
51
10
Hub
Bore Diameter(mm)
100MM PU MOULDED PP CORE REPLACEMENT WHEEL
GRIP INDUSTRIAL RED SERIES 4
CASTOR
Diameter (mm)
Ball Bearings
MAX* Load Cap.
Width (mm)
OUTSIDE DIAMETER WIDTH
BALL BEARINGS
ROLLER BEARING
52169
100x36
150
51
10
52170
125x38
200
51
10
AXLE ON WHEEEL ONLY
BOLT HOLE SP(mm) Spacing
* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)
46
www.navimportsaustralia.com.au
Grip Castors and Wheels BLUE SERIES 1 GAL PLATED PRESSED STEEL componentry with one piece hard nylon castor wheel with quality tapered roller bearings with 2 piece dust covers. Durable and economical castors suitable for use on smooth surfaces in multipurpose applications. BLUE NYLON CASTOR(FIXED)
GRIP INDUSTRIAL BLUE SERIES 1
CASTOR
Diameter (mm)
41978 41983
MAX.* Load Cap.
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
100x36
200
129
105x87
80x60
9x10.5(S*)
125x38
250
154
106x87
80x60
9x10.5(S*)
Bearings
BLUE NYLON CASTOR(SWIVEL)
GRIP INDUSTRIAL BLUE SERIES 1
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
100x36
200
128
36.5
106x86
80x60
9.5x13.5(S*)
125x38
250
153
39
106x86
80x60
9.5x13.5(S*)
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
CASTOR
Diameter (mm)
41979 41984
Bearings
BLUE NYLON CASTOR(SWIVEL/BRAKE)
GRIP INDUSTRIAL BLUE SERIES 1
CASTOR
Diameter (mm)
41980
125x38
250
153
39
106x86
80x60
9.5x13.5(S*)
41985
125x38
250
153
39
106x86
80x60
9.5x13.5(S*)
Bearings
BLUE NYLON CASTOR(SWIVEL)
GRIP INDUSTRIAL BLUE SERIES 1
MAX.* Load Cap.
Height (mm)
Offset (mm)
Bolt Hole Sp*(mm)
100x36
200
125
36
12.5
125x38
250
150
39
12.5
MAX.* Load Cap.
Height (mm)
Offset (mm)
Bolt Hole Sp*(mm)
CASTOR
Diameter (mm)
41981 41986
Bearings
BLUE NYLON CASTOR(SWIVEL/BRAKE)
GRIP INDUSTRIAL BLUE SERIES 1
CASTOR
Diameter (mm)
41982
100x36
200
125
40
12.5
41987
125x38
250
150
39
12.5
Bearings
* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)
47
www.navimportsaustralia.com.au
Grip Castors and Wheels BLUE SERIES 2 Gal plated pressed steel componentry with nylon core centred blue elastic rubber outer wheels(non marking) with quality roller bearings. Ideal for hospital and shopping centre applications. GRIP INDUSTRIAL BLUE SERIES 1
100MM BLUE ELASTIC RUBBER WHEELS CASTOR
Diameter (mm)
Roller Bearings
MAX.* Load Cap.
Bore Diameter
Hub Width (mm)
52050
100x32
100
38
12
52051
125x36
150
44
12
52052
160x50
200
58
20
52053
200x50
280
58
20
BLUE ELASTIC RUBBER CASTOR(FIXED)
GRIP INDUSTRIAL BLUE SERIES 2
CASTOR
Diameter (mm)
43001
MAX.* Load Cap.
Height (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
100x32
100
121.5
102x84
72x60
9x14(S*)
43005
125x36
150
147
102x84
72x60
9x14(S*)
42063
160x50
200
192
130x95
103x73
19x16(S*)
42067
200x360
280
233
130x95
103x73
19x16(S*)
Bearings
BLUE ELASTIC RUBBER CASTOR(SWIVEL)
GRIP INDUSTRIAL BLUE SERIES 2
CASTOR
Diameter (mm)
43002
Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
100x32
100
121.5
32
102x84
73x60
9x14(S*)
43004
125x36
150
147
35
102x84
73x60
9x14(S*)
42062
160x50
200
192
50
131x104
105x77
11x16(S*)
42068
200x50
280
233
52
131x104
105x77
11x16(S*)
Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
Bearings
BLUE ELASTIC RUBBER CASTOR(SWIVEL/BRAKE)
GRIP INDUSTRIAL BLUE SERIES 2
CASTOR
Diameter (mm)
43003
100x32
100
121.5
32
102x84
73x60
9x14(S*)
43006
100x36
150
147
35
102x84
73x60
9x14(S*)
42064
160x50
200
192
50
131x104
105x80
11x16(S*)
42069
200x50
280
233
52
131x104
105x77
11x16(S*)
Bearings
100MM BLUE NYLON WHEELS REPLACEMENT WHEELS
GRIP INDUSTRIAL BLUE SERIES 1
CASTOR
Diameter (mm)
Ball Bearings
Load Cap.
Hub
Bore Diameter(mm)
Width (mm) 52173
100x36
200
51
10
52174
125x38
250
51
10
* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)
48
www.navimportsaustralia.com.au
Grip Castors and Wheels BLACK SERIES 1 Grip industrial black series castor wheels feature precision ball and roller bearing technology coupled with quality fabricated and pressed steel componentry. RUBBER MOULDED IRON WHEEL CASTOR(FIXED)
GRIP INDUSTRIAL BLACK SERIES 1
CASTOR
Diameter (mm)
42078
MAX.* Load Cap.
Height (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
100x50
150
135
115x100
85x73
20x11(S*)
42081
125x50
180
159
115x100
85x73
20x11(S*)
42084
125x50
180
159
115x100
85x73
20x11(S*)
Bearings
RUBBER MOULDED IRON WHEEL CASTOR(SWIVEL) MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
100x50
150
135
20
115x100
85x73
20x11(S*)
42082
125x50
180
159
30
115x100
85x73
20x11(S*)
42085
150x50
250
189
31
115x100
85x73
20x11(S*)
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
CASTOR
Diameter (mm)
42079
Bearings
RUBBER MOULDED IRON WHEEL CASTOR(SWIVEL) CASTOR
Diameter (mm)
42080
100x50
150
135
20
115x100
85x73
20x11(S*)
42083
125x50
180
159
30
115x100
85x73
20x11(S*)
42086
150x50
250
189
31
115x100
85x73
20x11(S*)
Bearings
BLACK SERIES 2 Gal plated pressed steel componentry with steel core centred black rubber moulded wheels with quality roller bearings. General purpose light industrial, commercial and home applications. RUBBER MOULD STEEL CORE CASTOR(FIXED)
GRIP INDUSTRIAL BLACK SERIES 2
OUTSIDE DIAMETER WIDTH
BALL BEARINGS
ROLLER BEARING
CASTOR
Diameter (mm)
43017
MAX.* Load Cap.
Height (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
75x20
50
94
70x62
53x40
8.5x11(S*)
43024
100x30
70
121.5
100x85
72x60
9x14(S*)
43025A
125x37
100
147
104x83
72x60
9x14(S*)
43027
160x40
145
195
130x95
103x73
11x16(S*)
43031
200x50
185
235
130x95
103x73
11x16(S*)
AXLE ON WHEEEL ONLY
Bearings
BOLT HOLE SP(mm) Spacing
* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)
49
www.navimportsaustralia.com.au
Grip Castors and Wheels RUBBER MOULD STEEL CORE CASTOR(SWIVEL)
GRIP INDUSTRIAL BLACK SERIES 2
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
75x20
50
94
28
70x58
54x41
8.5x11(S*)
43023
100x30
70
121.5
32
102x84
73x60
9x14(S*)
43025B
125x37
100
147
35
102x84
73x60
9x14(S*)
43026
160x40
145
195
52
131x104
105x80
11x16(S*)
43030
200x50
185
235
52
131x104
105x80
11x16(S*)
CASTOR
Diameter (mm)
43015
Bearings
RUBBER MOULD STEEL CORE CASTOR(SWIVEL/BRAKE)
GRIP INDUSTRIAL BLACK SERIES 2
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
75x20
50
94
28
70x58
54x41
8.5x11(S*)
43025
100x30
70
121.5
32
102x84
73x60
9x14(S*)
43025C
125x37
100
147
35
102x84
73x60
9x14(S*)
43028
160x40
145
195
52
131x104
105x80
11x16(S*)
CASTOR
Diameter (mm)
43018
Bearings
BLACK SERIES 3 Gal plated pressed steel componentry with piece rubber only wheels and plain axel shafts. Light duty applications. PLAIN BEARING RUBBER SWIVEL CASTOR(POLYPROPYLENE)
GRIP INDUSTRIAL BLACK SERIES 3
Diameter (mm)
42054
2x50x17
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
80
71
32
60x60
43x43
13x6.3(S*)
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
30
65
21
58x48
46x35
6.3(R*)
Bearings
PLAIN BEARING RUBBER WHEEL CASTOR(SWIVEL)
GRIP INDUSTRIAL BLACK SERIES 3
OUTSIDE DIAMETER WIDTH
CASTOR
BALL BEARINGS
ROLLER BEARING
CASTOR
Diameter (mm)
43010
50x22
AXLE ON WHEEEL ONLY
Bearings
BOLT HOLE SP(mm) Spacing
* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)
50
www.navimportsaustralia.com.au
Grip Castors and Wheels CHROME SERIES 1 Chrome plated pressed steel componentry with grey polypropylene core centred thermoplastic rubber wheels(non marking) with quality ball bearings and 2 piece dust cover. GREY TPR CASTOR(SWIVEL)
GRIP INDUSTRIAL CHROME SERIES 1
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
BoltHole Sp*(mm)
Hole Size (mm)
80x32
100
114
28.5
92x64
75x45
♦ (R*/S*)
42074
100x32
130
138
35
92x64
75x45
♦ (R*/S*)
42076
125x32
150
161
33.7
92x64
75x45
♦ (R*/S*)
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
CASTOR
Diameter (mm)
42072
Bearings
♦ 8.5/8.5x11
GRIP INDUSTRIAL CHROME SERIES 1
GREY TPR CASTOR (SWIVEL/BRAKE) CASTOR
Diameter (mm)
42073
80x32
100
114
30.5
92x64
75x45
♦ (R*/S*)
42075
100x32
130
138
35
92x64
75x45
♦ (R*/S*)
42077
125x32
150
161
28
92x64
75x45
♦ (R*/S*)
Bearings
♦ 8.5/8.5x11
GREY SERIES 1 Nickel plated pressed steel componentry with steel core centred, grey coloured thermoplastic rubber wheels with quality roller bearings. GRIP INDUSTRIAL GREY SERIES 1
GRIP INDUSTRIAL GREY SERIES 1
GRIP INDUSTRIAL GREY SERIES 1
GREY STEEL CORE CASTOR(FIXED) CASTOR
Diameter (mm)
Bearings
MAX.* Load Cap.
Height (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
43051
75x20
50
94
70x62
53x40
8.5x11(S*)
43054
100x30
70
121.5
100x85
72x60
9x14(S*)
43057
125x37
100
147
100x85
72x60
9x14(S*)
GREY STEEL CORE CASTOR(SWIVEL) MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
75x20
50
94
28
70x58
54x41
8.5x11(S*)
43055
75x20
70
121.5
32
102x84
73x60
9x14(S*)
43058
125x37
100
147
35
102x84
73x60
9x14(S*)
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
CASTOR
Diameter (mm)
43052
Bearings
GREY STEEL CORE CASTOR(SWIVEL/BRAKE) CASTOR
Diameter (mm)
43053
72x50
50
94
28
70x58
54x41
8.5(R*)
43056
100x30
70
121.5
32
102x84
73x60
9x14(S*)
43059
125x37
100
147
35
102x84
73x60
9x14(S*)
Bearings
* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)
51
www.navimportsaustralia.com.au
Grip Castors and Wheels GREY SERIES 2(INSTITUTIONAL) Nickel plated pressed steel componentry with grey polypropylene core centred thermoplastic rubber wheels(non marking) with quality ball bearings and 2 piece dust cover. GREY INSTITUTIONAL CASTOR(FIXED)
GRIP INDUSTRIAL GREY SERIES 2
MAX.* LoadCap.
Height (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
50x20
40
69.5
60x60
43x43
13x6.3(S*)
42004
75x25
70
100
60x60
43x43
13x6.3(S*)
42008
100x27
100
134
76x76
55x55
15.5x8.5(S*)
42012
125x27
130
157
76x76
55x55
15.5x8.5(S*)
CASTOR
Diameter (mm)
42000
Bearings
GREY INSTITUTIONAL CASTOR(SWIVEL)
GRIP INDUSTRIAL GREY SERIES 2
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
50x20
40
69.5
24
60x60
43x43
13x6.3(S*)
42005
75x25
70
100
28
65x65
48x48
12x6.3(S*)
42009
100x27
100
134
37
76x76
55x55
15.5x8.5(S*)
42013
125x27
130
157
45
76x76
55x55
15.5x8.5(S*)
CASTOR
Diameter (mm)
42001
Bearings
Hole Size (mm)
GREY INSTITUTIONAL CASTOR WITH PP CORE(SWIVEL/BRAKE)
GRIP INDUSTRIAL GREY SERIES 2
GRIP INDUSTRIAL GREY SERIES 2
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
50x20
40
69.5
24
60x60
43x43
13x6.3(S*)
42006
75x25
70
100
28
60x60
43x43
13x6.3(S*)
42010
100x27
100
134
37
76x76
55x55
15.5x8.5(S*)
42014
125x27
130
157
45
76x76
55x55
15.5x8.5(S*)
CASTOR
Diameter (mm)
42002
Bearings
GREY INSTITUTIONAL CASTOR(SWIVEL/BRAKE) MAX.* Load Cap.
Height (mm)
Offset (mm)
Bolt Hole Sp*(mm)
50x20
40
69.5
24
12.5
42007
75x25
70
100
28
12.5
42011
100x27
100
134
37
12.5
42015
125x27
130
157
45
12.5
CASTOR
Diameter (mm)
42003
Bearings
GREY SERIES 3 Nickel plated pressed steel componentry with grey polypropylene centred wheels with moulded dark grey rubber outers, plain axel shafts light duty applications. GRIP INDUSTRIAL GREY SERIES 3
52
GREY TPR CASTOR(SWIVEL) CASTOR
Diameter (mm)
42055
2x50x20
Bearings
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
70
70
32
60x60
43x43
13x6.3(S*)
www.navimportsaustralia.com.au
Grip Castors and Wheels WHITE SERIES 1 Gal plated, pressed steel componentry with white polypropylene core centred, moulded polyurethane shock absorbent insert and white polypropylene outers with quality roller bearings. Ideal for internal use where the load is sensitive and needs cushioning. PP SANDWICH CASTOR(FIXED)
GRIP INDUSTRIAL WHITE SERIES 1
CASTOR
Diameter (mm)
42056 42058
MAX.* Load Cap.
Height (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
100x32
100
121.5
102x84
73X60
9X14(S*)
125x35
180
146
102x84
73X60
9X14(S*)
Bearings
PP SANDWICH CASTOR (SWIVEL)
GRIP INDUSTRIAL WHITE SERIES 1
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
100x32
110
128
39
100x8
80X60
13X9(S*)
125x35
150
152
35
100x80
80X60
13X9(S*)
CASTOR
Diameter (mm)
42057 42059
Bearings
WHITE SERIES 2 Gal plated pressed steel componentry with white polypropylene core centred, white nylon outer and plain axel shafts stock bearings. Lightweight duty, home use applications. NYLON PP CORE CASTOR(FIXED)
GRIP INDUSTRIAL WHITE SERIES 2
Height (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
75x23.5
90
100
100x59
80.5x40
8.4(R*)
100x30
145
132
100x59
80.5x40
8.4(R*)
Diameter (mm)
43007 43011
Bearings
PLAIN BEARING RUBBER WHEEL CASTOR(SWIVEL)
GRIP INDUSTRIAL WHITE SERIES 2
OUTSIDE DIAMETER WIDTH
MAX.* Load Cap.
CASTOR
BALL BEARINGS
ROLLER BEARING
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
75x23.5
90
100
28
65x65
48x48
12x6.3(S*)
100x30
145
134
37
76x76
55x55
15.5x8.5(S*)
CASTOR
Diameter (mm)
43008 43012
AXLE ON WHEEEL ONLY
Bearings
Hole Size (mm)
BOLT HOLE SP(mm) Spacing
* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)
53
www.navimportsaustralia.com.au
Grip Castors and Wheels SILVER SERIES 1 Quality 2 piece, gal plated, pressed steel, some greasable, rims fitted with flange style ball bearings and lightweight polyurethane foam filled puncture proof tyres. 260MM PU RUBBER FOAM FILLED PUNCTURE PROOF OFFSET WHEEL
GRIP INDUSTRIAL SILVER SERIES REPLACEMENT WHEELS 1
WHEEL
Diameter (mm)
Axle Diameter/Type
MAX.* Load Cap.
Bearing
Rim
Tyre Size
52102
260x78
3/4" offset
180
Ball Bearing
Two piece
4.10 x 3.50-4
52108
260x78
5/8" offset
180
Ball Bearing
Two piece
4.10 x 3.50-4
260MM PU RUBBER FOAM FILLED PUNCTURE PROOF OFFSET WHEEL
GRIP INDUSTRIAL SILVER SERIES REPLACEMENT WHEELS 1
WHEEL
Diameter (mm)
Axle Diameter/Type
MAX.* Load Cap.
Bearing
Rim
Tyre Size
52101
260
3/4" offset
136
Ball Bearing
Two piece
4.10/3.50-4
52106
260
5/8" offset
136
Ball Bearing
Two piece
4.10/3.50-4
SILVER SERIES 2 Quality 2 piece, gal plated, pressed steel rims with flange style ball bearings and pneumatic rubber tubed tyres. 260MM PNEUMATIC OFFSET WHEEL
GRIP INDUSTRIAL SILVER SERIES REPLACEMENT WHEELS 2
Diameter (mm)
Axle Diameter/Type
MAX.* Load Cap.
Bearing
Rim
Tyre Size
52103
260
3/4" offset
136
Ball Bearing
Two piece
4.10 x 3.50-4
52105
260
5/8" offset
136
Ball Bearing
Two piece
4.10/3.50-4
260MM PNEUMATIC OFFSET WHEEL
GRIP INDUSTRIAL SILVER SERIES REPLACEMENT WHEELS 2
OUTSIDE DIAMETER WIDTH
WHEEL
BALL BEARINGS
ROLLER BEARING
WHEEL
Diameter (mm)
Axle Diameter/Type
MAX.* Load Cap.
Bearing
Rim
Tyre Size
52104
260
5/8" Centered
136
Ball Bearing
Two piece
4.10 x 3.50-4
AXLE ON WHEEEL ONLY
BOLT HOLE SP(mm) Spacing
* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)
54
www.navimportsaustralia.com.au
Grip Castors and Wheels BLACK SERIES WHEELS Gal plated fabricated steel componentry with steel core centred, double ball bearing wheel and pneumatic and foam rubber(non flat) tyres. Ideal for external, rough terrain extreme duty applications. PNEUMATIC WHEEL CASTOR(FIXED)
GRIP INDUSTRIAL BLACK SERIES CASTOR WHEELS
WHEEL
Diameter (mm)
42070
260x90
Bearings
MAX.* Load Cap.
Height (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
150
300
115x100
85X73
20x11(S*)
PNEUMATIC WHEEL CASTOR(SWIVEL)
GRIP INDUSTRIAL BLACK SERIES CASTOR WHEELS
260x90
MAX.* Load Cap.
Height (mm)
Offset (mm)
Base Plate (mm)
Bolt Hole Sp*(mm)
Hole Size (mm)
150
300
50
115x100
85x73
20x11(S*)
GRIP INDUSTRIAL BLACK SERIES REPLACEMENT WHEELS D
F TH R E A UR
Bolt Hole Sp*(mm)
Hole Size (mm)
260x90
150
300
115x100
85x73
20x11(S*)
260x90
150
300
41976
41977
Bearings
50
115x100
85x73
20x11(S*)
ONE PIECE STEEL RIM FLAT FREE WHEEL WHEEL
Diameter (mm)
Axle Diameter/Type
MAX.* Load Cap.
Bearing
Boss size (mm)
Tyre tread pattern
Tyre Size
52120
400
25mm steel Centered
180
Ball Bearing
99
Knobby
4.80/4.00-80
ONE PIECE STEEL RIM FLAT FREE WHEEL WHEEL
Diameter (mm)
Axle Diameter/Type
MAX.* Load Cap.
Bearing
Boss size (mm)
Tyre tread pattern
Tyre Size
52121
400
25mm steel Centered
180
Ball Bearing
98
Turf
16 x 650-10
MO A
N D T HR E
OB N
BY TH R E
AD
F TH R E A UR
AD
AY THR E HW
D
HI
Base Plate (mm)
AD
G
Height (mm)
Diameter (mm)
K
D EA
BBY THR NO
MAX.* Load Cap.
WHEEL
DI
GRIP INDUSTRIAL BLACK SERIES REPLACEMENT WHEELS K
42071
Bearings
T
41977
T
Diameter (mm)
PUNCTURE PROOF FOAM RUBBER CASTOR WHEEL(FIXED & SWIVEL)
GRIP INDUSTRIALBLACK SERIES CASTOR WHEELS
41976
WHEEL
55
www.navimportsaustralia.com.au
Grip Castors and Wheels RED SERIES WHEELS Red coloured, baked enamel finished 1 piece pressed steel core centred, quality flange style ball bearing, fitted rim with pneumatic rubber tubed tyre.
400MM ONE PIECE STEEL RIM PNEUMATIC WHEEL
GRIP INDUSTRIAL RED SERIES REPLACEMENT WHEELS
WHEEL
Diameter (mm)
Axle Diameter/Type
MAX.* Load Cap.
Bearing
Tyre tread pattern
Tyre Size
52107
400
25mm steel centered
136
Ball Bearing
Turf
16 x 4.50 x 8
52110
400
25mm steel centered
200
Ball Bearing
Turf
16 x 6.50-8
52111
400
20mm centered
136
Ball Bearing
Turf
4.50 x 4-8
RED SERIES WHEELS Steel centred plastic core rim, quality flange style ball bearings and pneumatic rubber tubed tyre. GRIP INDUSTRIAL RED SERIES REPLACEMENT WHEELS
400MM PLASTIC RIM PNEUMATIC WHEEL
WHEEL
Diameter (mm)
Axle Diameter/ Type
MAX.* Load Cap.
Bearing
Tyre tread pattern
Tyre Size
52109
400
25mm steel centered
200
Ball Bearing
Turf
16 x 6.50-8
RED SERIES WHEELS Steel centred plastic core rim, quality flange style ball bearings and pneumatic rubber tubed tyre. 150MM STEEL RIM SEALED RUBBER WHEEL
GRIP INDUSTRIAL RED SERIES REPLACEMENT WHEELS
WHEEL
Diameter (mm)
Axle Diameter/ Type
Bearing
Tyre tread pattern
Tyre Size
52097
150
1/2” steel centered
Flange Bearing
Diamond
2.50 - 4
320MM TWO PIECE STEEL RIM PNEUMATIC OFFSETWHEEL
GRIP INDUSTRIAL RED SERIES REPLACEMENT WHEELS
WHEEL
Diameter (mm)
Axle Diameter/ Type
Bearing
Tyre tread pattern
Tyre Size
52099
320
1” steel centered
Ball Bearing
Turf
13 x 5.00-6
200MM TWO PIECE STEEL RIM PNEUMATIC WHEEL Axle Diameter/ Type
Bearing
Tyre tread pattern
Tyre Size
52100
200
5/8” centered
Ball Bearing
Turf
2.50 - 4
N D T HR E
K
DI
MO A
OB N
BY TH R E AD
F TH R E A UR
AD
AY THR E HW
D
HI
Diameter (mm)
AD
G
WHEEL
T
GRIP INDUSTRIAL RED SERIES REPLACEMENT WHEELS
* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)
56
www.navimportsaustralia.com.au
Grip Material Handling Equipment
HAND PALLET TRUCKS For the safe, efficient and stable lifting and maneuvering of heavy objects and materials, including pallets and skips in the warehouse, dock, building sites and general material handling areas. PART NO.
Lifting Capacity
Fork Length
Lifting Height(mm)
51800
2500Kg
1150mm
51805
2000Kg
1150mm
PART NO.
FORK WHEELS
51800
Double
51805
Single
MIN.
MAX.
70
195
70
195
Width between Forks
Weight
380mm
65Kg
380mm
65Kg
150 & 300KG PLATFORM TROLLEY Heavy duty tubular steel platform trolleys folds flat for easy transportation and storage. Two heavy duty fixed castors and two swivel castors with ball bearings ensure a smooth roll. PART NO.
Maximum Capacity
Dimensions
52003
150Kg
475mm(W) x 720mm(L)
52005
300Kg
870mm (W) x 590mm (L)
200 & 300KG PLATFORM HAND TROLLEY Deck is made from durable hardened plastic & and the ergonomically designed handle folds down for easy storage. Trolleys are mounted on 2 fixed & 2 swivel 125mm castors. PART NO.
Maximum Weight
Height From Floor
Low Noise Castor
Deck Size
52004
200Kg
150mm
100mm
720 x 485mm
52006
300Kg
190mm
125mm
900 x 600mm
GD600 - TRAILER DOLLY The ideal solution for the easy movement of light weight trailers such as box, Jet Ski and a small boat. PART NO.
Maximum Capacity
Packaged Weight
Low noise Castor
Overall Dimensions
GD600
270Kg
11.5Kg
100mm
1310mm x 680mm
57
www.navimportsaustralia.com.au
Grip Material Handling, Measuring & Engineering Equipment 500 & 150KG SCISSOR LIFT HYDRAULIC TABLE CARTS Rugged all steel cart features a foot operated hydraulic pedal. Adjustable lowering speed control. Move heavy parts without straining your back. PART NO.
Load Capacity
Table size
52011
500Kg
855 x 500mm
52013
150Kg
855 x 500mm
Lifting Height (mm)
Castors
MIN.
MAX.
340
900
MIN.
MAX.
340
900
Four 125mm castors, 2 locking swivel castors on rear. Two stationary castors - 125mm Two locking swivel castors - 125mm
350KG DOUBLE SCISSOR LIFT HYDRAULIC TABLE CART Rugged all steel cart features a foot operated hydraulic pedal. Adjustable lowering speed control. Move heavy parts without straining your back. PART NO.
Load Capacity
Table size
52015
350Kg
910x 500mm
Lifting Height (mm)
Castors
MIN.
MAX.
350
1300
Two stationary castors - 125mm Two locking swivel castors - 125mm
STAINLESS STEEL RULERS Heavy duty professional quality metric & imperial stainless steel rules have conversion table on the back. 29475 29477, 29480
PART NO.
Weight
Size
29475
55g
300mm
29477
150g
1000mm
29480
350g
600mm
HD COMBINATION SQUARE 300mm Professional quality. Satin chrome finished ruler. Baked enamel finished protractor. Leveled square head. Use as centre head, outside try square, depth gauge, scriber, 90 degree & 45 degree level, inside try square and meter. PART NO.
Weight
Size
Specifications:
30184
400g
300mm
Markings for inches, centimetres & millimeters.
STAINLESS STEEL PROTRACTOR 150mm Professional quality. Satin chrome finished ruler. Baked enamel finished protractor. Leveled square head. Use as centre head, outside try square, depth gauge, scriber, 90 degree & 45 degree level, inside try square and meter.
58
PART NO.
Weight
Size
59160
140g
150mm
www.navimportsaustralia.com.au
Grip Cutting Measuring & Engineering 6 PIECE TELESCOPIC INSIDE MEASURING GAUGE SET Used in engineering machine shops and engine building processes in conjunction with micrometres to accurately measure inside holes or bores from small to large diameters. Can also be used to help diagnose “out of roundness “of bores. PART NO.
59140
Features:
Specifications:
• Stainless satin hardened chrome plated steel construction • Knurled handles for secure grip • Uniform spring tension, self-cantering plungers for accurate readings • Contact point precision ground and hardened • Supplied in soft plastic pouch to prevent corrosion damage and provide safe storage when not in use
• Overall measurement range: 8 - 150mm • (6 pieces) 8-12.7mm, 12.7 - 19mm, 19 - 32mm, 32-54mm, 54-90mm, 90 -150mm
8 PIECE DOUBLE CUT ROTARY BURR SET Manufactured from precision ground, heat treated carbide steel. Cutting surfaces are double cut for efficient stock removal on both soft and hard materials. Convenient 8 piece set with 4 different shapes, 2 sizes of each, presented in a handy blow moulded storage case. PART NO.
86470
Weight
Specifications: • Shank size(all burrs): 1/4" diameter • Contents(8 piece set): 2 x ball shape • (1 x 1/4" diameter and 1 x 3/8" diameter) • 2 x cylindrical shape (1 x 1/2" x 1" and 1 x 3/8" x 3/4") • 2 x tree shape radius end (1 x 3/8" x 3/4" and 1 x 1/2" x 1") • 2 x cylindrical ball nose • (1 x 3/8" x 3/4" and 1 x 1/4" x 5/8")
324g
4 PC LONG REACH DOUBLE CARBIDE BURR SET 1pc cylindrical shape 3/8" X 3/4". 1pc ball shape 3/8". 2 x tree shaped radius ends 3/8", 3/4" shank size: 1/4" PART NO.
Weight
35116
120g
Specifications: • 1pc cylindrical shape 3/8" X 3/4". • 1pc ball shape 3/8". 2 x tree shaped radius ends • 3/8", 3/4" shank size: 1/4"
5 PIECE IMPERIAL REDUCED SHANK DRILL BIT SET Industrial dark blue finished, HSS reduced shank drill set for multipurpose use by engineering shops or the serious home handyman alike. PART NO.
Features:
Specifications:
35295
• Manufactured from high speed steel with dark blue industrial finish • Reduced 1/2" shank throughout size range • Most effective if used at low drill speeds • Single spiral flute for effective stock removal • Wooden, foam lined, double hinged storage box included
• Overall dimensions (L xWxH) 180 × 160 × 40mm • Individual sizes: 9/16”, 5/8”, 3/4”, 7/8” & 1" • Weight(nett): 1.5 kg
59
www.navimportsaustralia.com.au
Grip Cutting Measuring & Engineering 10 PIECE METRIC MORSE TAPER 2 DRILL BIT SET Industrial dark blue finished, HSS Morse taper number 2 shank drill set for multipurpose use by engineering shops or the serious home handyman alike. PART NO.
Features:
Specifications:
35300
• Manufactured from high speed steel with dark blue industrial finish • Morse taper number 2 shank fitting throughout size range • Single spiral flute for effective stock removal • Most effective if used at low drill speeds • Wooden, foam lined, double hinged storage box included
• Overall dimensions: • (L x W x H) 310×280×40 mm • Individual sizes: 14.5, 15, 16, 17, 18, 19, 20, 21, 22 & 23 mm • Weight(nett): 3.8 kg
3 PC METRIC STEP DRILL SET Grip step drills have multipurpose use. Designed for drilling and deburring repetitive holes in aluminium, brass, and copper, steel, plastic, plexiglass, laminates and many other thin materials. Used by sheet metal workers, auto mechanics, electricians and serious home handyman. PART NO.
Features:
Specifications:
35324
• Manufactured from drop-forged high speed steel with a titanium coating • 1/4"hex, quick change, impact grade shank for fitment to multiple use chucks or drill presses • Straight cut 2 flute design for fast and smooth cuts with efficient stock removal • Size depth graduations marked in flutes • Aluminium, hinged, foam filled storage case included
• Drill sizes: 4 - 12 mm, 4 - 20 mm, 4 - 32 mm, 2mm increments, 2mm increments, 2mm increments • Shank sizes:(all) 1/4" hex, quick change, impact grade • Weight(nett) including case: 160g
3 PIECE METRIC SPIRAL FLUTE STEP DRILL SET Grip step drills have multipurpose use. Designed for drilling and deburring repetitive holes in aluminium, brass, and copper, steel, plastic,plexiglass, laminates and many other thin materials. Used by sheet metal workers, auto mechanics, electricians and serious home handyman. PART NO.
Features:
35325
• Manufactured from fully polished drop forged high speed steel, heat treated for durability • Precision ground round shanks in 6, 8 and 10mm diameters • Single spiral flute design for fast, efficient stock removal • Size depth graduations marked in flutes • Quality pressed metal storage case included
Specifications: • Drill sizes: 2 - 12mm (2mm increments); 4 - 20mm(2mm increments); 4 - 30mm(2mm increments) • Shank sizes: 6mm (round), 8mm (round), 10mm (round) • Weight (nett) including case: 160g
15 PC BI METAL HOLE SAW KIT Manufactured from hardened steel with cutting edge weld to a tough alloy steel body. Can be used to cut circular holes in steel, brass, cast iron, aluminium, wood and plastic. Convenient blow mold case.
60
PART NO.
Weight
42044
1.9Kg
Size Size: 19, 22, 25, 32, 35, 38, 44, 51, 57, 64 and 76mm.
www.navimportsaustralia.com.au
Grip Cutting Measuring & Engineering 131 PC METRIC THREAD AND HELICOIL REPAIR KIT PART NO.
53200
Features:
Specifications:
• Ideal for repairing damaged or stripped internal threads. • Protects tapped threads against wear and damage. • Includes drill bits, thread taps, insert installations and lug breaking tools
• 5 Installation Tools, 5 Break Pin Tools, 5 Twist Drills, 1 Hex Key, 5 Taps and 110 Wire Thread Inserts • M5x0.8x6.7mm • M6x1.0x10.8mm • M8x1.25x10.8mm • M10x1.5x13.5mm • M12x1.75x16.3mm
25 PC METRIC THREAD AND HELICOIL REPAIR KIT PART NO.
53205
53210
53215
Features:
Specifications:
• Ideal for repairingdamaged or stripped internal threads. • Protects tapped threads against wear and damage. • Includes drill bits, thread taps, insert installations and lug breaking tools
• 1 Installation Tool, 1 Break Pin Tool, 1 Twist Drill, 1 Hex Key, 1 Tap and 20 Wire Thread Inserts • Sizes: M5x0.8x6.7mm • 1 Installation Tool, 1 Break Pin Tool, 1 Twist Drill, 1 Hex Key, 1 Tap and 20 Wire Thread Inserts • Sizes: M6x1.0x10.8mm • 1 Installation Tool, 1 Break Pin Tool, 1 Twist Drill, 1 Hex Key, 1 Tap and 20 Wire Thread Inserts • Sizes: M8x1.25x10.8mm
40PC TUNGSTEN STEEL TAP & DIE SET METRIC Heavy duty heat treated alloy steel construction and rust-resistant satin finish. Precision machined to exacting standards. Rockwell hardness of 58-61 HRC. PART NO.
Specifications:
53260
• Consists of national coarse, national fine & pipe combination thread. • Contains one Tap & Die in the following sizes - 3x0.5, 3x0.6, 4x0.7, 4x0.75, 5x0.8, 5x0.9, 6x1.0, 6x0.75, 7x1.0, 7x0.75, 8x1.25, 8x1.0, 10x1.25, 10x1.5, 12x1.75, 12x1.5, 1/8 pt. • Includes long handle adjustable tap wrench, Die handle, T type handle tap wrench, Flat screwdriver & screw pitch gauge. • Comes in black metal case.
53262
• Consists of national coarse, national fine & pipe combination thread. • Contains one Tap & Die in the following sizes - 4-40, 6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20,1/8 NPT-27 • Includes long handle adjustable tap wrench, Die handle, T type handle tap wrench, Flat screwdriver & screw pitch gauge. • Comes in black metal case.
45PC TUNGSTEN STEEL TAP & DIE SET METRIC/SAE Heavy duty heat treated alloy steel construction and rust-resistant satin finish. Precision machined to exacting standards. Rockwell hardness of 58-61 HRC. PART NO.
Specifications:
53280
• Contains one Tap & Die in each of the following sizes - 1-1/2" OD, 6x1.0, 6x0.75, 8x1.25, 8x1.0, 10x1.5, 10x1.25, 12x1.75, 12x1.5, 14x2.0, 14x1.5, 16x2.0, 16x1.5, 18x2.5, 18x1.5, 2" OD, 20x2.5, 20x1.5, 22x2.5, 22x1.5, 24x3.0, 24x1.5. • Includes 2 tap wrenches 3-12.5mm & 6-25mm. • 2x50mm diameter die stock with 38mm adaptor & 3mm mini flat screwdriver. • Comes in black metal case.
PART NO.
53300
Specifications: • Contains one Tap & Die in each of the following sizes - 10UNF 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1" • 10UNC 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1" • Includes 2 tap wrenches, 2" Die handle OD with Adaptor, screwdriver. • Comes in black metal case.
61
www.navimportsaustralia.com.au
Grip Cutting Measuring & Engineering 110PC TAP & DIE SET Heavy duty heat treated alloy steel construction and rust-resistant satin finish. Precision machined to exacting standards. Rockwell hardness of 58-61 HRC. PART NO.
53302
Specifications: • UNC mm: 4x40 - 12x24TPI • UNC SAE: 1/4"x20-3/4"x16TPI • UNF mm: 10 x 32TPI • UNF SAE: 1/4"x28-3/4"x16TPI • UNS: 1/4" x 24 & 1/4" x 40TPI • Metric: 6 x 1.0 - 18 x 1.5 • Pitch NPT: 1/8" x 27 & 1/4" x 18TPI • 2 tap wrench, 1 T type tap wrench and 2 die handles.
1" IMPERIAL & 0-25MM METRIC DIAL INDICATOR Used in precision engineering machine shops and engine building processes for accurate measurements of deck clearances , straightness of shafts ,run out or other measurements that involve distances between two surfaces or small amounts of component travel . Can be easily mounted on a magnetic base accessory (GRIP Part No 59120) for a more ergonomic operation with greater accuracy. PART NO.
Specifications:
59100
• Bezel diameter: 58mm • Measurement range: 0 - 1" • Increments of measurement: .0001
59101
• Bezel diameter: 58mm • Measurement range: 0 - 25mm • Increments of measurement: 0.01mm
ADJUSTABLE DIAL INDICATOR MAGNETIC BASE Used for the mounting of a dial indicator so accurate measurements of deck clearances, straightness of shafts, run out or any other measurements that involve distances between two surfaces or small amounts of component travel can be more ergonomically taken. PART NO.
59120
Features:
Specifications:
• Non-marring magnetic base with on/off release • Strong magnet with 60kg holding capacity • Main clamp pole 3/8" diameter for stability • Thumb screw adjustable arms allow precision measurements in any position
• Magnet; commercial grade with on/off release 60kg holding capacity • Main clamp upright pole diameter; 3/8" (9.5mm)
0-25MM METRIC EXTERNAL MICROMETRE SCREW GAUGE Used for the precise measurement of components or thicknesses between two faces with metric analogue scale and a measuring range of 0 - 25mm. PART NO.
59080
Specifications: • Measurement range; 0-25mm • Measurement face size; 6.5mm, flatness 0.0008mm • Calibrating adjustment spanner and precision thickness wedges included
25-50MM METRIC EXTERNAL MICROMETRE SCREW GAUGE Used for the precise measurement of components or thicknesses between two faces with metric analogue scale and a measuring range of 0 - 25mm. PART NO.
59081
62
Specifications: • Measurement range; 25-50mm • Measurement face size; 6.5mm, flatness 0.0008mm • Calibrating adjustment spanner and precision thickness wedges included
www.navimportsaustralia.com.au
Grip Cutting Measuring & Engineering 4 PC(0-100MM) METRIC MICROMETRE SCREW GAUGE SET Used for the precise measurement of components or thicknesses between two faces. 4 piece set with metric analogue scales and a measuring range of 0 - 100mm.
150MM & 200MM DIGITAL VERNIER CALIPER Used for a wide variety of accurate, precision measuring applications.
PART NO.
Features:
Specifications:
59085
• Satin finish with black micro fine graduations (0.01mm) • Hammer tone finished cast frames • Knurled finger thimble ratchet stop adjustment • One handed operation with thumb lock lever • Hardened carbide measuring faces • Supplied in wooden, hinged lid case with EVA foam tray to prevent corrosion damage and provide safe storage when not in use
• Measurement ranges (4 piece); 0-25mm, 25-50mm, 50 - 75mm, and 75 - 100mm • Measurement face size; 6.5mm, flatness 0.0008mm • Calibrating adjustment spanner and precision thickness wedges included
PART NO.
Features:
Specifications:
• Quality hardened stainless steel manufacture with satin finish • Micro fine black graduations and battery powered high resolution display screen • Sliding surfaces are raised to prevent defacement wear of graduations • Measurement faces are precision ground and lapped for extreme accuracy • 4 -way jaws provide outside, inside, depth and step measurements • Supplied in hard cover plastic case to prevent corrosion damage and provide safe storage when not in use
• Length / range: • 0 - 150mm (6") • Push button display: on/off/Zero/Metric/inch • Resolution: 0.01mm / 0.0005" • Battery: Supplied
59020
59021
6"/150MM VERNIER CALIPER Used for a wide variety of accurate, precision measuring applications. Can be read in both inch and metric scales.
PART NO.
59023
8"/200MM VERNIER CALIPER WITH FINE ADJUSTMENT Used for a wide variety of accurate, precision measuring applications. Can be read in both inch and metric scales.
PART NO.
59024
59025
300MM DIAL VERNIER CALIPER METRIC Used for a wide variety of accurate, precision measuring applications.
• Length/range: 0 - 200mm (8 “) • Push button: on/off/ Zero/Metric/inch • Resolution: 0.01mm/0.0005" • Battery: Supplied
Features: • Quality hardened stainless steel manufacture • Satin finish with micro fine black graduations for easy, precise reading • Measurement faces are ground and lapped for extreme accuracy • 4 - Way jaws provide outside, inside, depth and step measurements • Sliding surfaces are raised to prevent defacement wear of graduations • Supplied in plastic case to prevent corrosion damage and provide safe storage when not being used
Features: • Quality hardened stainless steel manufacture • Satin finish with micro fine black graduations for easy, precise reading • Measuring faces are ground and lapped for extreme accuracy • 4 - way jaws provide outside, inside, depth and step measurements • Sliding surfaces are raised to prevent defacement wear of graduations • Fine adjustment mechanism • Supplied in plastic case to prevent corrosion damage and provide safe storage
Specifications:
• Length: 0 - 150mm (6") • Reading: 0.05mm + 1/128 in
Specifications:
• Length: 0 - 200mm (8”) • Reading: 0.05mm + 1/128in
• Length: 0 - 300mm (12”) • Reading: 0.05mm + 1/128in
PART NO.
Features:
Specifications:
59060
• Quality hardened stainless steel manufacture • Satin finish with micro fine black graduations for easy, precise reading • Measuring faces are ground and lapped for extreme accuracy • 4 - way jaws provide outside, inside, depth and step measurements • Sliding surfaces are raised to prevent defacement wear of graduations • Fine adjustment mechanism • Supplied in plastic case to prevent corrosion damage and provide safe storage • Shock proof
• Length: 0 - 300mm • Reading: 0.01mm Increments on Dial and 1.0mm on Vernier Body
63
www.navimportsaustralia.com.au INDEX - LIST OF ITEMS Item No:
Page No:
IN0001 4 IN0002 4 IN0003 4 IN0103 4 IN0101 4 IN0102 4 IN0035 4 IN0037 4 IN0038 4 IN0039 4 IN0041 4 IN0043 4 IN0045 4 IN0048 4 IN0140 4 IN0141 4 IN0142 4 IN0143 4 IN0144 4 IN0145 4 IN0146 4 IN0147 4 IN0011 5 IN0012 5 IN0013 5 IN0014 5 IN0015 5 IN0016 5 IN0017 5 IN0018 5 IN0019 5 IN0020 5 IN0021 5 IN0022 5 IN0023 5 IN0024 5 IN0025 5 IN0026 5 IN0027 5 IN0028 5 IN0029 5 IN0030 5 IN0031 5 IN0032 5 IN0033 5 IN0034 5 IN0035 5 IN0111 5 IN0112 5 IN0113 5 IN0114 5 IN0115 5 IN0116 5 IN0117 5 IN0118 5 IN0119 5 IN0120 5 IN0121 5 IN0122 5 IN0123 5 IN0124 5 IN0125 5
64
Item No: Page No: IN0126 5 IN0127 5 IN0128 5 IN0129 5 IN0130 5 IN0131 5 IN0132 5 IN0133 5 IN0134 5 IN0135 5 IN0136 5 IN0137 5 IN0138 5 IN0139 5 IN0065 6 IN0066 6 IN0067 6 IN0068 6 IN0069 6 IN0201 6 IN0202 6 IN0203 6 IN0204 6 IN0205 6 IN0207 6 IN0208 6 IN0209 6 IN0210 6 IN0211 6 IN0212 6 IN0070 6 IN0071 6 IN0072 6 IN0073 6 IN0074 6 IN0075 6 IN0076 6 IN0077 6 IN0078 6 IN0079 6 IN0080 6 IN0081 6 IN0082 6 IN0083 6 IN0084 6 IN0085 6 IN0213 6 IN0214 6 IN0215 6 IN0216 6 IN0217 6 IN0218 6 IN0219 6 IN0220 6 IN0221 6 IN0222 6 IN0223 6 IN0224 6 IN0225 6 IN0226 6 IN0227 6 IN0402 7
Item No:
Page No:
IN0403 7 IN0404 7 IN0405 7 IN0406 7 IN0407 7 IN0408 7 IN0409 7 IN0410 7 IN0411 7 IN0412 7 IN0413 7 IN0414 7 IN0415 7 IN0416 7 IN0417 7 IN0418 7 IN0419 7 IN0420 7 IN0421 7 IN0422 7 IN0423 7 IN0424 7 MTLT710 7 MTLT912 7 IN0004 8 GEM20 8 IN0063 8 IN-12 8 INBMHS14 9 INBMHS16 9 INBMHS17 9 INBMHS19 9 INBMHS20 9 INBMHS21 9 INBMHS22 9 INBMHS24 9 INBMHS25 9 INBMHS27 9 INBMHS29 9 INBMHS30 9 INBMHS32 9 INBMHS33 9 INBMHS35 9 INBMHS37 9 INBMHS38 9 INBMHS40 9 INBMHS41 9 INBMHS43 9 INBMHS44 9 INBMHS46 9 INBMHS48 9 INBMHS51 9 INBMHS52 9 INBMHS54 9 INBMHS57 9 INBMHS59 9 INBMHS60 9 INBMHS64 9 INBMHS65 9 INBMHS67 9 INBMHS68 9 INBMHS70 9
www.navimportsaustralia.com.au
INDEX - LIST OF ITEMS Item No: Page No: INBMHS73 9 INBMHS76 9 INBMHS79 9 INBMHS83 9 INBMHS86 9 INBMHS89 9 INBMHS92 9 INBMHS95 9 INBMHS98 9 INBMHS102 9 INBMHS105 9 INBMHS108 9 INBMHS111 9 INBMHS114 9 INBMHS121 9 INBMHS127 9 INBMHS140 9 INBMHS146 9 INBMHS152 9 INAR1430 9 INAR32200 9 IN-1250 10 IN-1450 10 IN-1650 10 IN-1850 10 IN-2050 10 IN-2250 10 IN-2450 10 IN-2525 10 IN-2550 10 IN-2650 10 IN-2850 10 IN-3050 10 IN-3225 10 IN-3250 10 IN-3350 10 IN-3450 10 IN-3650 10 IN-3850 10 IN-4050 10 BOH-32 10 BOH-42 10 IN-1225 10 IN-1425 10 IN-1625 10 IN-1825 10 IN-2025 10 IN-2225 10 IN-2425 10 IN-2525 10 IN-2625 10 IN-2825 10 IN-3025 10 IN-3225 10 IN-3325 10 IN-3425 10 BOH-071925 10 IN-635103 10 IN-63577 10 INSA-2 11 INSA-3 11 INSA-5 11
Item No: Page No: INSB-3 11 INSB-5 11 INSC-2 11 INSC-3 11 INSC-5 11 INSD-2 11 INSD-3 11 INSD-5 11 INSE-3 11 INSF-3 11 INSF-5 11 INPH2150 12 INPH2251 12 INSG-3 12 INSH-2 12 INSH-5 12 INSL-3 12 INSM-3 12 INSN-1 12 INPH2505 12 INSD-03 13 INSD4-12 13 INSD4-20 13 INSD4-32 13 INSTCS1 13 INSTCS06 13 INSTCS08 13 INSTCS10 13 INSTCS12 13 INSTCS16 13 INSTCS20 13 INSP10160 14 INSP10210 14 INSP12160 14 INSP12210 14 INSP14260 14 INSP16260 14 INSP18260 14 INSP20260 14 INSP5110 14 INSP5160 14 INSP55110 14 INSP6160 14 INSP65160 14 INSP65210 14 INSP8160 14 INSP8210 14 INSM16400 14 INSM16600 14 INSM18400 14 INSM18600 14 INSM20400 14 INSM20600 14 INSM22400 14 INSM22600 14 INSM25400 14 INSM25600 14 INSM28400 14 INSM28600 14 IN4120 15 IN5120 15 IN5125 16
Item No: Page No: IN5132 16 INJO113 16 INJO116 16 INMS2B16 17 INMS2B18 17 INMS2JT2 17 INMS2JT3 17 INMS2JT6 17 INMS3B16 17 INMS3B18 17 INMS3JT3 17 INMS3JT4 17 INMS3JT6 17 INR2x1 17 INR3x2 17 INR4x2 17 INR4x3 17 INMT2 17 GMT2 17 PFS-75 18 PFE-45 18 PFB-75 18 PVF300 18 PVF400 18 PVF500 18 PVF600 18 PBR1012 18 PBR1016 18 PBR1020 18 PBR1024 18 MTBRS305 19 MTBRS760 19 MTBRS1016 19 MTFS1320 19 MTPB1270E 19 MTPB1220 20 MTPB610 20 MTPB1295 20 81140 20 81150 21 MTSP610 21 MTSP1050 21 MTSP1270 21 81200 22 81210 22 81220 22 81120 22 MTUB-100 23 MTUB-100A 23 MTTB22 23 MTBS115 24 MTBS181 24 MTBS8S 24 MTRSF52 25 MTRST607 25 MTRSV52 25 MTRST604 25 MTPLASCUT40 26 MTVO140 26 MTVO180 26 MTMIG140 27 MTMIG180 27
65
www.navimportsaustralia.com.au INDEX - LIST OF ITEMS
Item No: Page No: 85080 28 85100 28 85120 28 85245 28 85240 28 85238 28 85171 28 85167 28 MTBG625L 29 MTBG825L 29 MTDS300 29 MTWS250 30 15100 31 15115 31 15350 31 15420 32 15990 32 MTSBC880 33 MTSBH1 33 15009 34 15020 34 15025 34 15005 34 MTSB07G 35 MTSB01 35 10460 36 10462 36 10464 36 10466 36 10469 36 10470 36 10471 36 10472 36 10530 37 10520 37 15020PAD 37 10542 37 10535 37 15000 38 15003 38 15001 38 15002 38 15025#33 39 15025#8 39 15100A 39 15100G 39 15025#9 39 15025#7 39 15100F 39 15350G 39 15100G 40 15420H 40 15350FP 40 15350G 40 15100W 40 15115W 40 15990W 40 15420W 40 15420V 40 41948 41 41952 41 41948 41
66
Item No: Page No: 41952 41 41949 41 41953 41 41949 41 41953 41 41950 41 41954 41 41950 41 41954 41 41961 42 41966 42 41961 42 41966 42 41963 42 41967 42 41963 42 41967 42 41964 42 41968 42 41964 42 41968 42 43022 42 43032 42 43021 43 43029 43 43037 43 43016 43 43039 43 43041 43 43036 43 43033 43 43038 43 43040 43 43035 43 43034 43 43039A 43 52160 43 52161 43 52162 43 52163 43 42091 44 42094 44 42097 44 42092 44 42095 44 42098 44 42093 44 42096 44 42099 44 42087 44 42089 44 42088 44 42090 44 41994 45 41997 45 41995 45 41998 45 41996 45 41999 45 41988 45 41991 45 41989 45
Item No: Page No: 41992 45 41990 46 41993 46 52164 46 52165 46 52169 46 52170 46 41978 47 41983 47 41979 47 41984 47 41980 47 41985 47 41981 47 41986 47 41982 47 41987 47 52050 48 52051 48 52052 48 52053 48 43001 48 43005 48 42063 48 42067 48 43002 48 43004 48 42062 48 42068 48 43003 48 43006 48 42064 48 42069 48 52173 48 52174 48 42078 49 42081 49 42084 49 42079 49 42082 49 42085 49 42080 49 42083 49 42086 49 43017 49 43024 49 43025A 49 43027 49 43031 49 43015 50 43023 50 43025B 50 43026 50 43030 50 43018 50 43025 50 43025C 50 43028 50 42054 50 43010 50 42072 51 42074 51
www.navimportsaustralia.com.au
INDEX - LIST OF ITEMS Item No: Page No: 42076 51 42073 51 42075 51 42077 51 43051 51 43054 51 43057 51 43052 51 43055 51 43058 51 43053 51 43056 51 43059 51 42000 52 42004 52 42008 52 42012 52 42001 52 42005 52 42009 52 42013 52 42002 52 42006 52 42010 52 42014 52 42003 52 42007 52 42011 52 42015 52 42055 52 42056 53 42058 53 42057 53 42059 53 43007 53 43011 53 43008 53 43012 53 52102 54 52108 54 52101 54 52106 54 52103 54 52105 54 52104 54 42070 55 42071 55 41976 55 41977 55 52107 55 52110 55 52111 55 52109 55 52120 55 52121 55 52097 56 52099 56 52100 56 51800 57 51805 57 52003 57 52004 57
Item No: Page No: 52005 57 52006 57 GD600 57 52011 58 52013 58 52015 58 29475 58 29477 58 29480 58 30184 58 59160 58 59140 59 86470 59 35116 59 35295 59 35300 60 35324 60 35325 60 42044 60 53200 61 53205 61 53210 61 53215 61 53260 61 53262 61 53280 61 53300 61 53302 62 59100 62 59101 62 59120 62 59080 62 59081 62 59085 63 59020 63 59021 63 59023 63 59024 63 59025 63 59060 63
67
NAV Imports Australia Pty Ltd
METALTECH
NAV Imports Australia Pty Ltd 5-6 Ormsby Place, Wetherill Park NSW 2164 P: (02) 9757 1751 | F: (02) 9757 1757 W: www.navimportsaustralia.com.au
Designed by NAV IMPORTS © Australia 2017