Sykes-Pickavant April-June 2016 New Products & Special Offers Promotional Brochure by Sykes-Pickavant

Specialist Tool Solutions

NEW PRODUCTS SPECIAL OFFERS

to be CHARITY Proud supporting our chosen ISSUE cancer charity

APRIL - JUNE 2016 www.sykes-pickavant.com

Tel: 01543 679900 www.sykes-pickavant.com

FLUID HANDLING

Sykes-Pickavant are proud to be supporting our chosen cancer charity Here at Sykes-Pickavant, it affects us all when one of our colleagues is living with cancer. So this year we are delighted to be supporting our chosen cancer charity, who in turn will provide support and inspiration to our colleague and their family during this time of need. Please support us in our annual fundraising activities - not just for our colleague but for everyone who is affected by cancer. For further details regarding our fundraising activities during 2016, please visit our website: www.sykes-pickavant.com

During this quarter (April - June 2016), for every product sold that features the green symbol (right), we will donate the indicated amount to our chosen cancer charity.

36600500

STAINLESS STEEL 45L TANK

Fuel Extractor / Retriever

£1

• Retrieve fuel following a filling error, removal of tank sender unit, changing or checking the fuel gauge, rinsing the fuel tank during body work etc • Emptying via tank filler neck or fuel lines

£448.95

CHARITY DONATION

33165000

£134.95

Speedfiller

• For replacing the coolant after opening or draining the system • Eliminates airlocks during refilling through the use of vacuum • Includes multi-fit cone & adaptor to connect to ‘315’ Series kits

36600700

Adaptor Set • Set of fittings to connect in line, before the injection pump (on most fuel systems) for safe emptying of fuel

£24.95

Pneumatic Oil Extractors

Designed to meet the requirements of the modern workshop as well as health & safety issues • Remove and extract waste fluids or oil from an engine • Combined volume capacity of 90 litres (70L tank & 20L drain bowl) • Works best at oil temperatures between 40-60° with suction speeds of up to 6 litres per minute • Visible fill level indicator • Powered from compressed air • Working pressure 8-10 Bar • Empty tank with compressed air at max. 1 bar pressure • Includes: - Adaptors for BMW, Mercedes, VW and Citroen - 4 x 700mm nylon tube probes with internal spring steel anti-kink wires - 2 x 700mm steel probes

IDEAL FOR VEHICLES WITHOUT A SUMP PLUG

Vehicle Fluid Change Syringe - 0.2L

• Composite plastic for brake fluid & antifreeze

OFFER £15.95

0.2L

Pneumatic Oil Extractor

53390500

£269.00

Pneumatic Oil Extractor with 9 Litre Inspection Chamber

• Includes inspection chamber providing visual assurance that the suction facility is operating correctly • Waste oil becomes immediately visible in the chamber allowing the user easy assessment of the oil • Includes anti splash device

£325.00

WARNING: Do not use with corrosive or inflammable products

66050400

53390000

1.5L

66095100 Vehicle Fluid Change Syringe - 1.5L • Ideal for applications such as engine / gear oil & differential fluid

OFFER £39.95 SAVE £10.00

LIST PRICE £49.95

SAVE £9.00

LIST PRICE £24.95

CHARITY DONATION

During this quarter (April - June 2016), for every product sold that features the green symbol, we will donate the indicated amount to our chosen cancer charity. For further details regarding our fundraising activities, please visit: www.sykes-pickavant.com

TORQUE 80010000

80020000

‘Motorq 100’ - 3/8” Push-Thru Torque Wrench • 20 - 100 Nm / 15 - 80lbs.ft • Length: 353mm • Weight: 0.73kg

OFFER £109.95 SAVE £22.00

‘Motorq 200’ - 1/2” Push-Thru Torque Wrench • 40 - 200 Nm / 30 - 150lbs.ft • Length: 442mm • Weight: 1.01kg

LIST PRICE £131.95

OFFER £124.95 SAVE £26.00

LIST PRICE £150.95

80030000 ‘Motorq 300’ - 1/2” Push-Thru Torque Wrench • 60 - 300 Nm / 45 - 220lbs.ft • Length: 570mm • Weight: 1.40kg

OFFER £137.95 SAVE £28.00

LIST PRICE £165.95

80033000 ‘Motorq 330’ - 1/2” Push-Thru Torque Wrench

OFFER £144.95

• 60 - 330 Nm / 45 - 250lbs.ft • Length: 684mm • Weight: 1.52kg

80039900 ‘Motorq 399’ - 3/4” Push-Thru Torque Wrench

SAVE £38.00

LIST PRICE £182.95

£1

CHARITY DONATION

• 80 - 400 Nm / 60 - 300lbs.ft • Length: 684mm • Weight: 2.1kg

OFFER £214.95 SAVE £43.00

LIST PRICE £257.95

800400SP

INCLUDES FREE CASE - SEE BELOW

‘Motorq 400’ - 3/4” Push-Thru Heavy Duty Torque Wrench

£402.00

• 150 - 700 Nm / 100 - 500lbs.ft • Length: 1150mm • Weight: 6.30kg

800500SP

INCLUDES FREE CASE - SEE BELOW

‘Motorq 500’ - 3/4” Push-Thru Heavy Duty Torque Wrench

£412.00

• 300 - 1000 Nm / 200 - 750lbs.ft • Length: 1475mm • Weight: 7.30kg

800550SP

INCLUDES FREE CASE - SEE BELOW

‘Motorq 550’ - Stepped 3/4” to 1” Heavy Duty Torque Wrench • 1” Sq. Dr (uses ¾” to 1” stepped convertor) • 700 - 1500 Nm / 500 - 1000lbs.ft • Length: 1475mm • Weight: 10.40kg

£1

CHARITY DONATION

£618.00

8005CASE Torque Wrench Case • Rugged blow moulded case suitable for 80040000 / 80050000 / 80055000 Note: Torque wrench not included

CHARITY DONATION

£29.99

Tel: 01543 679900 www.sykes-pickavant.com

COOLING 31370000

Combined Petrol & Diesel Cylinder Leakage Tester Kit

£1

FOR BOTH PETROL & DIESEL ENGINES

CHARITY DONATION

• Provides a direct indication to the location of the leak by measuring the rate of loss of compression for individual cylinders • Helps to diagnose worn / broken piston rings, burnt / leaking valves and faulty head gaskets • Includes a selection of glow plugs and an adjustable dummy injector • Supplied with M12 and M14 brass quick release spark plug adaptors

31370500 Petrol only Cylinder Leakage Tester Kit

• As per kit above excluding glow plugs & dummy injector

£249.95

£149.95

Combustion Leakage Testers

• Fast and accurate diagnosis of cylinder head gasket leaks • Suitable for use with both Petrol & Diesel engines • Supplied with standard and sensitive reaction test fluid (100ml)

33195000 Combustion Leakage Tester • Quick connector for use with: 315 / 316 / 317 Series Cap Adaptors

33145500 Universal Combustion Leakage Tester

33145000 XL Combustion Leakage Tester • For use with HGV, commercial and plant engines • Quick connector for use with 33140000 and 331400V2 cap adaptors

• Quick test combustion leakage tester • Features 25 to 50mm cone

£84.95

£99.95 £69.95 Reaction fluid also available to purchase individually: 33194200 - Standard 250ml and 33194400 - Sensitive 250ml

331942SP

6 PACK SPECIAL SAVE £4.75!

6 x 250ml of Standard Reaction Fluid

OFFER £24.95 SAVE £4.75

LIST PRICE £29.70

Cooling System Pressure Test Kits

Provides an effective solution when pressure testing the cooling system to help locate internal & external leaks

COMBINED OFFER! 331595V2SP ‘315’ Series Cooling System Pressure Test Kit PLUS Cooling Cap Set (33159800) • Includes: - Hand Pump with Pressure Gauge & Quick-Release fitting - Hose Assembly c/w quick-release fitting - 16 x Threaded Cooling System Cap Adaptors - 3 x Bayonet Fitting Cooling System Cap Adaptors - 1 x Cap Adaptor wrench

£1

CHARITY DONATION

33159800 Cooling Cap Set

OFFER £249.90 SAVE £90.00

LIST PRICE £339.90

• Set of 2 additional cap adaptors to update 331595V2 kit • Applications include: BMW, Chevrolet, Mini, Saab & Vauxhall

NEW LOWER PRICE & MORE APPLICATIONS!

331400V2 XL Cooling System Pressure Test Kit

Updated kit includes additional caps covering more: DAF, Renault, Caterpillar, Optare, MAN, Dart, Komatsu, JCB, Volvo construction and Agricultural vehicles • Includes: - High capacity metal bodied hand pump with Pressure Dual Gauge & Quick-Release fitting - Hose Assembly c/w quick-release fitting - 10 x Reservoir & Radiator pressure caps

OFFER £199.95 SAVE £100.00

LIST PRICE £299.95

Note: Full application details can be found on our website: www.sykes-pickavant.com

CHARITY DONATION

AIR TOOLS 90206000

BESTSELLER

‘Vibro-Impact’ Air Hammer

• A unique concept to aid the removal of seized suspension parts • The ‘Vibro-Impact’ system allows for the controlled application of force via an air powered impact hammer • Allows the operator to control & gradually increase the force being applied, in order to loosen seized components • Features a built-in shock-absorber in order to minimise risk of damage if too much pressure is accidentally applied • Low vibration for user comfort

NEW

90225000

SAVE £68.00

LIST PRICE £335.00

TO BE USED WITH ‘VIBRO-IMPACT’ AIR HAMMER

90229000

‘Vibro-Impact’ Pin Set - 6 Pc.

OFFER £267.00

‘Vibro-Impact’ Socket Set - 7 Pc.

• Sizes: 5.2mm, 6.5mm, 6.9mm, 7.7mm, 9.3mm and 12.7mm

NEW

• Designed to untighten seized screws, nuts or glow plugs without any damage • To be used with ‘Vibro-Impact’ air hammer (90206000 - see above) • Suitable for bolts, screws, rounded lugs, glow plugs, clamp-on injectors • Vibro-shaft 3/8” square drive • Special impact sockets with internal edge: 8, 9, 10, 11, 12, 13, 14mm

£89.95

£39.95

High Quality Air Tools that set the standard for Torque! Impact Wrench Specifications:

Drive

Max Torque Nm (Reverse)

Air Consumption (l / min)

Weight (kg)

Price

90201000

1/2”

1600

1084

94.2

135

1.8

500

93.5

130

1.08

£179.00 £169.00

90201500 (Mini)

1/2”

680

90201300 (Ultra-Short)

1/2”

680

500

134

1.3

£159.00

3/4”

2600

2000

210

3.2

£499.00

90202500

3/8”

680

500

93.5

130

1.08

90203500

1/4”

98.2

105

0.9

£169.00 £139.00

1”

3100

2200

110

305

6.8

£849.00

Part No.

90202000

90204500

£1 £1

CHARITY DONATION

90213000

Micro Die Grinder

£99.95

• Powerful mini device for small / fine grinding & milling • 1/8” drive / 70,000rpm • Ideal for work in confined spaces

IDEAL FOR CUTTING BEARING CASES & LOCKING WHEEL NUTS

CHARITY DONATION

Torque Nm Noise (Fwd) (dBA)

90213500

Micro Die Grinder Bit Set (5 Pack)

£79.95

• For use with Micro Die Grinder (left) • Contains five shaped ends suitable for precision work Individual Bits (3 Pack) also available SPECIAL PACK DEAL Part No.

Ref.

Length

Diameter

Price

902135-01

40mm

3mm

£46.95

902135-02

33mm

902135-03

40mm

3mm

£46.95

902135-04

40mm

3mm

£46.95

902135-05

40mm

3mm

£46.95

3mm / Sphere - 4mm £53.95

Tel: 01543 679900 www.sykes-pickavant.com

DIESEL GLOW PLUG

NEW

08594000 Universal Glow Plug Removal Master Kit

• Complete set for removing broken glow plugs: M8 x 1.0, M9 x 1.0, M10 x 1.0 and M10 x 1.25 • Kit includes 4 x special milling cutter tools (3 pcs with 4 cuttings and 1 pc with 2 cuttings) with self-centering helicoidal tip for universal use - Individual centering adaptors are not required CHARITY • Quick and easy removal - also allows the user to restore DONATION the thread for installation of the new glow plug Specifications:

£2

Dimension A ≥ 14mm (M10) Dimension A ≥ 20mm (M9, M8) Dimension L ≤ 13mm L (thread)

£849.00

Universal Glow Plug Removal Kits

NEW

4 x special milling cutter tools with self-centering twist drill bit for universal use without the need for any dedicated centering aids

08594100 08594900 08594800

Part No.

Glow Plug Size

Dimension A ≥

Dimension L ≤

Price

£1 £1 £1

CHARITY DONATION

M10 x 1.0 / M10 x 1.25

14mm

13mm

£485.00

CHARITY DONATION

M9 x 1.0

20mm

13mm

£365.00

CHARITY DONATION

M8 x 1.0

20mm

13mm

£365.00

08596000 Universal Glow Plug Tip Extraction Master Kit

£1

CHARITY DONATION

• Complete kit for glow plugs electrode extraction: M8 x 1.0, M9 x 1.0, M10 x 1.0 and M10 x 1.25 • Includes all the necessary tools (9 x extraction rods, 4 x glow plug guides and 1 x slide hammer) to safely remove the terminal part of the glow plug electrode without damaging the cylinder head

UNIVERSAL KIT

NEW

Glow Plug Tip Extraction Kits M8, M9 & M10

Suitable for removing the final part of the electrode in case of breakage / seizure of the glow plug inside its seat

08596100 Glow Plug Tip Extraction Kit - M10 x 1.0 • Suitable for M10 thread size

08596800 Glow Plug Tip Extraction Kit - M8 & M9

£275.00

NEW

£139.00

• Suitable for M8 sized glow plug tips • Also suits M9 glow plug tip removal by using the same M8 size in the slightly larger M9 female thread of the cylinder head

£139.00

085900V2 Vibro Impact Glow Plug Remover Set

• For the effective removal of 8, 9, 10, 11 & 12mm glow plugs • Uses controlled impact torque to create vibration • Includes 4 low-torque settings for controlled vibration (10, 20, 30, 40Nm) • Supplied with special long-reach 8, 9, 10, 11 & 12mm glow plug sockets, long and short extensions and universal joint for ease of access

CHARITY DONATION

Square Drive

¼”

Max Torque - Right

40Nm

Max Torque - Left

10 / 20 / 30 / 40Nm

Air Inlet Air Consumption

¼” 250 ltrs / min

Speed

12,000 per min

Air Supply

6.3bar / 90psi

OFFER £215.00 SAVE £44.95

LIST PRICE £259.95

INJECTOR SERVICE & REMOVAL 18584000

NEW

Universal Injector Vibration Tool

• Specially designed tool to assist in the removal of stubborn injectors • To be used in conjunction with any suitable injector puller or slide hammer • Includes universal clamp to attach to pulling spindle or injector pulling adaptors where space allows • The main body can be rotated to 4 positions on the horizontal and 4 positions at an angle • Fully adjustable clamp and can be used with or without the tension springs provided • Can be attached and locked in place with the two adjustable locking handles • The tool can be used whilst the injector is under hydraulic / mechanical tension or before tension is applied • The tool can also assist in other pulling applications

£449.00

£1

CHARITY DONATION

Scan the QR code to watch a video of the tool in action

185800V2P1 Hydraulic Injector Puller Kit c/w Hydraulic Pump and FREE Diesel Injector Seat Cleaner Set

FREE!

FREE! DIESEL INJECTOR SEAT CLEANER SET (017500V2 - WORTH £219.00 See page 11 for details)

WHEN YOU PURCHASE 185800V2P1

• Provides controlled force to aid the removal of OFFER £1295.90 seized / stubborn injectors where there is insufficient SAVE £386.00 LIST PRICE £1681.90 access for traditional slide hammers • Includes a multi-position frame, with adjustable legs of different lengths CHARITY DONATION and a selection of mounting adaptors to allow alignment of the tool with the injectors on a wide variety of modern diesel engines • Supplied with injector adaptors for most modern injector types • 10 tonnes Hydraulic Hollow Cylinder provides the force • Includes aluminium bodied hand pump - 2 Speed, 10,000psi fitted with gauge, hydraulic hose and ¾” hydraulic coupler

£2

185810V2

185800V2

Mechanical Hydraulic Injector Puller Kit

Hydraulic Injector Puller Kit only

• As per 185800V2P1 (above) excluding hydraulic pump and free Diesel Injector Seat Cleaner Set

£999.95

• As per 185800V2 kit (left) but includes a mechanical hydraulic ram OFFER £1099.95 • Allows use of the kit without the SAVE £100.00 need for a separate hydraulic pump

08585000 Heavy Duty Slide Hammer Injector Removal Kit

LIST PRICE £1199.95

OFFER £245.00 SAVE £50.00

LIST PRICE £295.00

• For the removal of Bosch, Delphi Denso and Siemens injectors • Features a flexible u-joint adaptor for access in restricted areas • Includes 6 x Injector adaptors, 4 x Injector Solenoid removers and 2 x Nozzle Extractors

CHARITY DONATION

Tel: 01543 679900 www.sykes-pickavant.com

INJECTOR SERVICE & REMOVAL

NEW

18590000 Universal Extractor Kit with Hydraulic Cylinder

• Universal kit complete with hydraulic cylinder for removing seized fuel injectors. Note: Pump not included (20017000) • Hydraulic cylinder with 10 tonnes of force • Hydraulic and Mechanical operation • Suitable for the extraction of numerous models of diesel fuel injectors specifically: M17 x 1.0 for Bosch, M14 x 1.0 for Delphi, M16 x 1.0 for Toyota adaptor, M20 x 1.0 for Denso and M25 x 1.0 / M27 x 1.0 for Siemens • This compact kit can be used directly on the engine - in-situ • Can be used as a mechanical kit for the most confined spaces - i.e. against a bulkhead • Can be used as a hydraulic kit for maximum power to help release tightly seized injectors • Easy to set up and adjustable supporting feet allow for angle and position setting • Main side and top bars allow for CHARITY adaption onto various engine DONATION configurations

£1250.00

£2

08555000

£1

NEW

Injector Extractor Kit - Toyota • To aid the removal of seized / stubborn Denso injectors • Parts of the kit can be mounted together around an injector creating a stable mount for the slide hammer to fix onto - Compact slide hammer allows for use on an engine in-situ • Suitable for Toyota, Nissan, Mazda, Opel / Vauxhall and Lexus

CHARITY DONATION

Injector Extractor Kit - Mercedes

NEW

• Allows for the removal of tightly fixed injectors nozzles and injectors on Mercedes 2.1L, 2.2L, 3.0 V6 and Chrysler 300C without removal of the cylinder head • Engine removal not required • Injectors: Bosch (2.1L / 2.2L), Delphi (3.0), Mercedes: Vito, Vario, CLK, Sprinter, Viano, Class: M, GL, C, GLK, E, CLS, S, R and G

£210.00

£299.95 Denso Injectors: - 23670 - 30080 - MB416600 - MB40A - 5870 - 13H50B - 11L 12182 - 23670 - 26011 - 23670 - 0R050 - 10J 06798

£1 Injector Extractor Kit - PSA Group 08552000

08551400

NEW

• For removing injection nozzles on 2.0HDI and 2.2HDI - PSA group • Removes tightly fixed injector nozzles without dismantling the cylinder head • Injectors (Bosch / Siemens) can be removed simultaneously • Includes bracket and 6 x screws • Suitable for Peugeot, Citroen, Fiat & Lancia • Engine Codes: DW10: RTH, RHW, 4HW, RHT, RHM, RHR, RHK DW12: 4HX, 4HZ, 4HW, 4HY, 4HT, 4HS, 4HP, 4HR, 4HN

CHARITY DONATION

£1 Injector Extractor Kit - Renault 18582700

NEW

CHARITY DONATION

• For removing injectors using a mechanical screw system • Engine removal not required • Injectors: Bosch • Suitable for: Renault, Nissan, Opel • Engine: 1.9dCI • Engine Code: F9Q

£295.00

£499.00

CHARITY DONATION

TESTING & BATTERY CARE

NEW

03202500

Start / Stop Battery & Electrical System Analyser OFFER £279.95 • Tests 6V-12V batteries and 12V-24V volt charging & starting systems • Digital screen with integrated printer • Operating range: 40-2000 CCA • Bad connection warning

SAVE £20.00

LIST PRICE £299.95

• Tests EFB, VRLA / GEL, AGM Flat Plate, AGM Spiral and regular liquid batteries in seconds • Rating system: SAE (CCA) / DIN / EN / IEC & JIS Spare paper rolls available: 032025-01 (Pack of 2)

845124SP Accusmart 12v 4Amp Battery Charger

• Suitable for Wet (Lead Acid), AGM, Gel & Fleece type batteries • Protection against: Short circuits, voltage peaks (AC & DC), polarity inversion overheating and voltage spikes AUTOMATIC þ • Supplied with: ELECTRONIC þ - Eyelets for permanant battery connection INTELLIGENT þ - Cigarette Lighter Plug to recharge through 12v Aux. Socket - Crocodile Clamps for Battery Connection

325200SP Portable 4 Gas Analyser with Printer

MADE IN THE UK

• For fault diagnosis, tuning and pre-MOT testing • Truly portable hand-held gas analyser - Ultra light weight - only 1.1kg • Measures CO, HC, CO2, O2 (NOx model option available on request) to Class 1 accuracy • Suitable for both petrol and LPG vehicles and ideal for both static and dynamic testing • Internal memory stores up to 250 test results manual & automatic recording options • Up to 4 hours internal battery life • Provides Lambda / AFR measurement and corrected CO • Pump speed control - Improves battery life • Bluetooth connectivity to PC (Free analytical software available to download)

• Large graphic display • Includes printer and AC / 12v chargers

INCLUDES INFRA-RED WORTH PRINTER £150.00

£1495.00

Propulstation Booster Pack with Docking Station Eliminate the risk and frustration of an uncharged booster pack! • Long & flexible cables with double insulation • Robust, wide-opening clamps include copper trace carrying the current to the bronze jaws & protecting the spring against over-heating

521002AC 12v 800CA for Workshop • Supplied with mains AC charger for workshop use • Voltage - 12v • Cranking Amps - 800CA • Peak Amps - 2370

£2

£535.95

CHARITY DONATION

521002DC 12v 800CA for Vehicle • Designed to be installed into a vehicle • Voltage - 12v • Cranking Amps - 800CA • Peak Amps - 2370

£63.95

£493.95

Other Accusmart Battery Chargers are also available. For further details please visit our website: www.sykes-pickavant.com

861041SP SOS Booster Pack - MINI 12v 440CA

Pro-Start Booster Packs are perfectly safe for the on-board electronics on modern vehicles and are compatible with Petrol, Diesel & Hybrid vehicles

• Voltage - 12v • Cranking Amps - 440CA • Peak Amps - 1600 • Cable length - 0.6 metre • Clamp Opening - 40mm • Automatic Charger - 1.3A • Size - 37.5 x 11 x 32cm

£170.95

CHARITY DONATION

ALL BOOSTER PACKS HAVE LIFETIME CASE WARRANTY & 2 YEAR BATTERY WARRANTY Other models also available: Part No.

Description

Voltage

Cranking Amps

Peak Amps

Price

861001SP

Pro-Start 700

12v

700

1860

£282.95

861002SP

Pro-Start 800

12v

800

2370

£365.95

1400 / 700 1600 / 800

3720 / 1860 4740 / 2370

761001SP 761006SP

Pro-Start Plus 1400 Pro-Start Plus 1600

12/24v 12/24v

£668.95 £885.95

“All booster packs include a mains 240V smart charger to maintain peak battery condition for long life & maximum performance”

Tel: 01543 679900 www.sykes-pickavant.com

SUSPENSION WORKSTATIONS

THE BEST SPRING PROGRAMME ON THE MARKET NEW

38480800 Mercedes Bracket

38480900 Mercedes Bracket

MADE IN THE UK

NEW

• For Mercedes C Class (W205) 2015 onwards - Front springs

• For Mercedes C Class (W204) 2008-2014 and E Class Coupe (W207 / C207) 2009 onwards - Front springs

38481000 NEW Mercedes Bracket • For Mercedes ML Class 163 1997-2005 - Rear springs

MADE IN THE UK

£179.95

£1

MADE IN THE UK

£1

CHARITY DONATION

£1

CHARITY DONATION

38480100 Mercedes Bracket Set

38480200 Upper Jaw Set

38480700 Double Depth Strut Vice

• Upper bracket for Mercedes A, B, C, E Class and lower bracket for E Class

• For high compression and close coil springs (Toyota / Honda etc)

• For use with extra long strut assemblies • Chrysler Voyager

£42.95

£239.95

£117.95

38480400 Special Bracket

38480500 Special Bracket

38480600 Special Bracket

• For VW Touareg / Porsche Cayenne

• For Mercedes C Class 2010-

• For Nissan Qashqai

£99.95

385800-60

385800-61

Workstation Arm Extender - Pair • Mounts between original top arm and jaw attachment • Use to extend the length of the top spring mounting jaw position • Can be used singly to provide 10mm extension or as a pair for 20mm ext

Workstation Swivel Jaws - Pair • Mounts onto top arms in place of standard top jaws & contacts directly onto spring • Jaw ‘floats’ to follow changes in spring angle / profile during compression • Constant contact with the coil spring surface area for increased safety • Able to work on both left and right handed coil springs when used in conjunction MADE IN THE UK with brackets above

£69.95

£149.95

38580400

38580200

Coil Spring Clamp

Jaw Holder

• Tool to secure coil spring into lower bracket • Designed to hold the coil spring still during initial compression and restrict twisting through the bracket

• For use with 3858 & 3868 workstation brackets • Includes: 3 x hanging hooks 4 x slots for brackets

CHARITY DONATION

£119.95

£179.95

£49.95

£99.95

SUSPENSION WORKSTATIONS

SIMPLY THE BEST SPRINGS HAVE EVOLVED....HAVE YOUR TOOLS? AUTOMATIC JAW LEVELLING PIVOTS TO COMPENSATE & HOLD ALL COIL SPRINGS INCLUDING LEFT HAND COILS FULL HEIGHT STEEL SAFETY GATES INTERCHANGEABLE JAWS / VICE TO SUIT DIFFERENT SPRINGS

LENGTH OF TRAVEL: 330MM

TOP ARMS & JAWS ADJUST AND LOCK TO SECURE SPRING

SAFETY SWITCH PREVENTS OPERATION WHEN GATES ARE OPEN

UNIQUE DOUBLE DEPTH FRONT PLATE ALLOWS SAFE WORK ON EXTRA-LONG STRUT ASSEMBLIES

ADJUSTABLE STRUT VICE WITH 4 x SETTING OPTIONS

4 x FLOOR MOUNTING HOLES FOR INSURANCE COMPANY COMPLIANCE

UP TO 2452KG OF FORCE (AT 10 BAR) AT THE PRESS OF A PEDAL

385800SP

OFFER £1595.00

HEAVY DUTY PNEUMATIC COIL SPRING COMPRESSOR WORKSTATION

Universal piece of equipment for assembling and disassembling struts and coil springs on cars, 4WD’s and LCV’s. Includes 2 x standard brackets (78-130mm / 125-205mm) and 1 x strut vice

INCLUDES

FREE

38680000 Mechanical Coil Spring Compressor Workstation

MERCEDES BRACKET SET (38480100)

UPPER BRACKET FOR MERCEDES A, B, C, E CLASS & LOWER BRACKET FOR MERCEDES E CLASS WORTH £239.95

£795.00

Fitted with Heavy Duty Mechanical Components instead of Pneumatics - Ideal for mobile use or where air supply is not practical • Allows for use where air supply is limited, restricted or unavailable i.e. Mobile use • High power mechanical spindle allows for the application of up to 1600kg of compression force onto contained spring • Long main spindle achieves large 420mm of stroke • Powered by easy access 19mm hex drive on top of tool directly onto main spindle and can be used with either hand tools or even impact air tools • Includes adjustable vice clamp • Dimensions: 1400 x 520 x 300mm

CHARITY DONATION

SAVE £150.00

LIST PRICE £1745.00

08921000 39 Pc. Universal Shock Absorber Tool Set

• Enables the piston rod to be held whilst allowing the nut to be loosened / tightened • Includes - 2-tap & slot-profile socket - D-profile / Slotted / T-profile bits - 6-pt sockets & bits - M12 - XZN bit • Ideal for use with 3858 compressor workstation

£149.95

Tel: 01543 679900 www.sykes-pickavant.com

ENGINE SERVICE 31467500

31467600

Diesel Fuel System Bleeding Kit

MADE IN THE UK

• Designed to allow the user to bleed / prime the low pressure feed side of the diesel fuel system • Contains common sized low pressure pipe sets including: - Standard 8mm, 10mm and newer 9.65mm (3/8 inch) - Renault small & large - Ford • Typical coverage includes: Citroën, Fiat, Ford, Land Rover, Peugeot, Renault, Volvo & Vauxhall • Clear pipes for visability of air bubbles • Colour coded pipes for easy identification

OFFER £149.95

• Connects to 3/8” drive air ratchet to replace the hand pump section in 31467500 kit (left) to generate faster flow • Retaining bracket holds pump during use for one-hand operation Note: Suitable for diesel fuel systems only

31467000

Diesel Fuel System Bleeding Kit - Master Kit • Includes 31467500 kit (left) plus a low pressure fuel gauge (10bar), tee piece and ratchet pump • Gauge and tee piece enables the same pipes to be used for both bleeding and fuel pressure

£375.00

SAVE £50.00

£2

08550500

08529500

LIST PRICE £199.95

5th Gear Puller - Ford

• A quick and simple method of removing the fifth gear on Ford FWD transmissions, before carrying out internal repairs Applications: - Ford IB5 Gearbox: Fiesta / Ka / Focus - Ford MTX-75 Gearbox: Focus / C-Max / Mondeo / Jaguar X Type - Ford VXT-75 Gearbox: OFFER £72.95 SAVE £27.00 Galaxy / Transit / Transit Connect LIST PRICE £99.95

53406100 DPF Service Kit

NEW

Fortron Diesel Particulate Treatment (DPF) has been formulated for two applications: 1. As a fuel tank additive to treat DPF contamination 2. As a preventive maintenance tool • Aids passive regeneration of the DPF • Helps to maintain engine performance / efficiency • Reduces soot & exhaust gas emissions • Suitable for all diesel fuels and fuel additive systems e.g. Eolys fluid ONE KIT TREATS UP TO 50L OF DIESEL FLUID

£18.00

£99.95

Ratchet Pump Kit

CHARITY DONATION

Seal Removal & Replacement Kit

• Remove & install awkward seals as found on engines, gear boxes, power steering pumps etc • Universal coverage for seals 27-58mm diameter • Includes seal puller, long & short extracting hooks for seals - e.g. on camshafts or crankshafts OFFER £64.95 and a selection of bushes, sleeves and SAVE £39.30 mandrels for installing new seals LIST PRICE £104.25

017500V2 Diesel Injector Seat Cleaner Set

• Cleans injector seats and chambers when changing or reconditioning diesel injectors • Helps to avoid blow-back due to poorly seated injectors • Now includes: - Removal tool for copper washers - Injector blanking plugs to avoid debris entering the cylinders - Wire brush cleaning set for chamber walls - New centralising stem to improve correct cleaning seating angle

OFFER £179.95 SAVE £39.05

LIST PRICE £219.00

534061-12 DPF Service Kit - 12 Pack £216.00

CHARITY DONATION

WORKSHOP EQUIPMENT COMBINED OFFER!

384000SP

08770000

Gearbox Cradle (38450000)

Transmission Jack PLUS Gearbox Cradle

• Transmission Jack (38400000) features: - Pedal pump - Chrome plated ext. rod - “Dead man” controls - Max. height: 1970mm - Max. weight: 300kg

• For gearboxes up to 300kg • Twin adjustable screws allow for various gearbox orientations • Four adjustable side plates to fit and support gearboxes • Includes two collars to fit popular transmission jacks

Universal Press Support Block • Easily press bearings on a variety of suspension arms • Three point contact guarantees a perfect, safe support • Adjustable height anvil bolts • Swivel element for added versatility • Suitable for use with presses up to 30T

£219.00

OFFER £339.00 SAVE £39.00

LIST PRICE £378.00

Mechanical Headlight Beam Testers - MOT Approved & Pre-Inspection

• Features rotating column with adjustable mirror visor for accurate alignment to vehicle • Luxmeter with graduated analogue scale for accurate light intensity measurement • Easily adjustable vertical sliding mechanism by self lubricating sliders • Features built in MOT beam checking panel SUITABLE FOR ALL HEADLIGHT TYPES INCLUDING XENON

£1

NEW 02695000 Pre-Inspection Headlight Beam Tester • Portable base on 3 wheels (self install only) • Column height: 1.66m

£595.00

£1

CHARITY 02683000 DONATION MOT Approved Headlight Beam Tester - LV • 3.7 metre rail kit / column height: 1.66m • Base mounted on double rail for £635.00 ease of use (self install only)

£1

CHARITY 02688000 DONATION MOT Approved Headlight Beam Tester - HGV • 5.2 metre rail kit / column height: 1.66m • Base mounted on double rail for ease of use (self install only)

CHARITY DONATION

£745.00

Silver Series range of Hydraulic Workshop Presses equipped with a two-speed manual pump, overload safety valve, automatic arm back-run system & V blocks

£2

CHARITY DONATION

• Heavy duty steel frame Height Width Depth Bed Depth Range Weight (mm) (mm) (kg) • Two speed pump Part No. Rating (mm) (mm) (mm) • Overload safety valve 53436000* 15T 1930 920 650 170 85 - 950 150 • Automatic arm return • Pressure gauge 53436200* 20T 2030 940 650 180 65 - 1030 165 • V blocks • Manufactured in the EU 53436300* 25T 2030 950 650 180 70 - 1030 170 • Piston over-travel limit stop 53436400* 30T 2060 1120 650 200 115 - 1020 230 • Winch for table (For models 53436400 & 53436500)

Other sizes of press are available - Contact Customer Services for details

CHARITY DONATION

53436500

50T

NEW

2290

1220

650

210

70 - 1065

370

Price

£624.00 £744.00 £944.00 £999.00 £1624.00

*Recommended for use with Universal Press Support Block - 08770000 - See above N.B. For deliveries made outside UK Mainland, an additional carriage charge will apply

Tel: 01543 679900 www.sykes-pickavant.com

WORKSHOP TOOLS 03860000

03275000

Strap Type Oil Filter Remover For all filters up to 300mm diameter

Two Way Hose Clamp Plier

• Wide application plier for use on radiator clamps, fuel line clamps, tank ventilation line clamps and bearing clips • Special intersected slot design ideal for use in confined spaces OFFER £19.95 • 16mm wide head more SAVE £5.00 LIST PRICE £24.95 effectively grips hose clamp compared to general 9mm head pliers

• Multi-purpose strap wrench, ideal for all oil filters up to 300mm circumference • Range: 20 to 300mm diameter • Strong steel shank and polyester strap • Strap Length: 1 metre long & 40mm wide OFFER £15.95 • Double ended 13/16” hex SAVE £19.00 c/w 3/8” & 1/2” sq. dr LIST PRICE £34.95

02251000 Stud Remover & Installer Kit

£1

IDEAL FOR USE ON VW FUEL FILTER PIPE CLIPS

04551000 CHARITY DONATION

11 Pc. Non Marking Trim Tool Set

• Professional set of strong, flexible plastic angled, lever and panel pullers • Reduces risk of damaging / scratching surfaces

• Unique design allows the installation & removal of studs without damaging the threads • Allows tightening & application of torque without thread damage • Sizes: - M6 x 1.0 - M8 x 1.25 OFFER £34.95 - M10 x 1.25 SAVE £35.00 - M10 x 1.50 LIST PRICE £69.95

69001200 15 Pc. XS Stubby Impact Socket Set

£16.95 £69.95

• Includes 15 x 1/2” drive sockets (10-24mm) • Extra short low profile - 28mm - Ideal for use in confined, tight spaces • Ideal for use with 1/2” ultra short impact wrench - 90201300

03900100 Crows Foot Oil Filter Wrench

• For the removal and installation of the oil filter on Ford Duratorq and PSA 2.0 and 2.2 HDi / TDCi engines OFFER £14.95 • Unique shaped design SAVE £3.00 allows easier and faster LIST PRICE £17.95 access • 27mm bi-hex with 1/2” drive • Engine codes: DW10C / DW12C

69005500 3/4” Impact Socket Set • Includes 7 x popular sizes: 24, 27, 30, 32, 33, 36 and 41mm • 175mm extension

£1

4 Pc. Removal & Replacement Set

01493500 Digital LCD Circuit Tester

CHARITY DONATION

SAVE £10.00

LIST PRICE £149.95

OFFER £17.95 SAVE £4.00

LIST PRICE £21.95

NEW

• Suitable for 6, 12 and 24v systems • LED indication for power (red) and ground (green) • Features crocodile clip with spring cable extendable to 3 metres • Stainless steel probe • Small testing current <10mA

OFFER £139.95

IDEAL FOR USE ON VW GROUP ELECTRICAL CONNECTORS

66088800 • Allows for easy replacement of seals and ‘o’ rings while reducing the risk of damage to seal or finished surface

CHARITY DONATION

£24.95

TRANSIT TOOLS 08260300 Ford Transit Wheel Hub & Brake Disc Assembly Remover

NEW

08253800

MADE IN THE UK

Ford Transit Rear Disc Separator Kit

NEW

• Press solution for removing the rear disc from the bearing hub • The hub bearings on this type of Transit often seize in place, requiring extreme force to separate • Suitable for Ford Transits 2000 onwards (where rear discs are fitted - 5 stud)

£139.95

• For removal of the front brake disc and hub assembly on Ford Transits from 2001 - 2013 • OEM Code: 204-345B

Bearing References: SNR: R152.58 SKF: VKBA3589 Optimal: 302 255 Febi: 45355

OFFER £59.95 SAVE £40.00

LIST PRICE £99.95

08256000 Ford Transit Ball Joint Tool - Manual Option

ON VEHICL SOLUTIONE

£1

CHARITY DONATION

MADE IN THE UK

• For the removal & installation of the lower front ball joints as found on Ford Transits 2000-2013 • Designed to support ball joint during installation - helps eliminate premature ball joint failure • Manual option includes screw converter allowing the user to utilise an existing SP hydraulic ram

£172.50

Hydraulic option also available (18256000) that includes 12 Tonne SP hydraulic ram

£99.00

08269000 Ford Transit Lower Arm Bush Tool

• For the removal and replacement of the large rear bush on the lower arms of Ford Transits from 2000 – 2013 • Designed to be used with a 187000V2 press frame and ram • On vehicle solution with minimal strip down • Can also be used in a workshop press for lower arms when they have been removed from the vehicle

£1

CHARITY DONATION

• Applications: Ford Transit Mk5 & Mk6 from 2000 to 2013 • OE Bush Numbers covered: 4042024, 4372132, 4540787 & 7372131

08756000

MADE IN THE UK

Ford Transit Bearing Press Kit

082545V2

3 IN 1 TOOL

MADE IN THE UK

Ford Transit Hub & Front Wheel Bearing Remover Kit

Updated slide hammer kit now includes larger hub plate and extra-long pillars to enable removal of hubs and front wheel bearings on six stud Transits CHARITY • For Ford Transit Mk6 & Mk7 Hub DONATION and complete front wheel bearing removal • Features a heavy duty slide hammer which operates in two directions to achieve multiple operations OFFER £299.00 SAVE £80.95 in one tool LIST PRICE £379.95

£1

BESTSELLER

Successful removal of troublesome inner bearing race and reinstallation of complete bearing assembly • For the removal and installation of the front wheel bearing on Ford Transits 2000-2013 with the aid of a workshop press • Suitable for bearings on both 5 & 6 stud hubs

REMOVES BOTH THE INNER & OUTER BEARING RACE WITHOUT CUTTING OR HEATING

CHARITY DONATION

£199.00

Tel: 01543 679900 www.sykes-pickavant.com

BRAKE BLEEDING & SERVICE Brake Pipe Flaring Kits - 270 Series

VICE M

OUNTE

INDUSTRY LEADING FLARING TOOL FOR OVER 30 YEARS

Brake flaring tool that produces both Convex and Double Lap flares to SAE & DIN standards • Metric & imperial pipe sizes • Unique ‘Dial-a-Size’ Turret design • Automatic punch extraction from flare Available Kits: Part No.

• From 3/16” to 1/2” / From 4.75mm to 12mm • Lever cam operation for quick flaring • Screw clamp for accurate die alignment

Suitable for brake pipe sizes

List Price

Save

Offer

02700100 SAE Single & Double Flares: 3/16” & 4.75mm

£185.00 £31.00 £154.00

SAE Single & Double Flares: 3/16”, 4.75, 6, 8, 10mm DIN Single Flares: 4.75mm SAE Single & Double Flares: 02700800 3/16, 1/4, 5/16, 3/8, 1/2”, 4.75, 6, 8, 10, 12mm DIN Single Flares: 4.75mm SAE Single & Double Flares: 3/16, 1/4” 4.75, 6mm 02700900 DIN Single Flares: 4.75mm

£239.00 £40.00 £199.00

02700200

34400500 240v Electric Brake Bleeder - 6 bar

£1

OFFER £475.00

- Weight: 10kg

£215.00 £36.05 £178.95

SAVE £24.00

LIST PRICE £499.00

OFFER £69.95

03614000

CHARITY DONATION

• One man operation for brake & clutch bleeding • Compatible with ABS systems • Rugged impact resistant moulded housing • Long supply hose (3.2m) • Adjustable pressure output from 0 - 6 bar to suit vehicle • Large internal storage area for brake fluid containers up to 10L • Includes aluminium SP Euro cap - angled screw type for popular vehicle connection • Additional range of caps also available

MADE IN THE UK

£310.00 £55.00 £255.00

SAVE £30.00

LIST PRICE £99.95 Air Assisted Caliper Piston Wind Back Tool Kit

NEW

• Air operated ram applies pressure to the caliper piston, while the handle is rotated by hand • Reversible – works on both RH & LH applications • Magnetic head • Supplied with nine adaptors

03490000

ONE USER OPERATION

Speedyvac Brake Bleeder Kit • Float valve shuts vacuum down when container reaches full to prevent dangerous brake fluid spray if capacity is accidently exceeded • Compact size (800ml capacity) • Internal shut off valve closes when not in use • Includes Autofiller unit (500ml capacity)

Flaremaster 2 - The Original Hand Held Automotive Brake Pipe Flaring Tool • Hydraulic power unit provides portable power for precision flaring • Quick-release chuck for positive engagement of the punch CAPABLE OF FLARING • Enhanced bridge unit for greater strength and inter-changeable STEEL BRAKE PIPES die, held in place by magnets • Create full, or part sections of pipe, which can be trimmed, flared or spliced as required • Flaring pipes on the vehicle allows for accurate repair sections to be spliced • Stainless steel upgrade kit available (02727500) Save

No.1

Size

Contents

02725000

4.75mm, 3/16” brake pipes SAE & DIN single and double flares

Flaremaster2

£157.50 £28.00 £129.50

02725600

4.75mm, 3/16” & 6mm brake pipes SAE & DIN single and double flares

Flaremaster2

£187.50 £32.00 £155.50

02729500

4.75mm, 3/16” brake pipes SAE & DIN single and double flares

02729600

4.75mm, 3/16” & 6mm brake pipes SAE & DIN single and double flares

CHARITY DONATION

List Price

ON CAR

BRAKE PIPE FLARING TOOL

Part No.

£99.00

Offer MADE IN THE UK

Flaremaster2 / Brake Pipe Aid Plier Telescopic Tube Cutter (3-32mm) Pipe Deburring Tool (3.2-16mm) Flaremaster2 / Brake Pipe Aid Plier Telescopic Tube Cutter (3-32mm) Pipe Deburring Tool (3.2-16mm)

£197.50 £34.00 £163.50 £227.50 £38.00 £189.50

WORKSHOP EQUIPMENT

BESTSELLER

53403500

Fortron Coolant Flush Machine

Fortron Injector Max Machine

• Effective way of flushing and exchanging the complete cooling system fluid • Suitable for all types of coolants & vehicles • Includes a set of multi-application adaptor fittings • Air operated

Simple and effective method of cleaning both petrol and diesel fuel systems without the removal of injectors from the vehicle

INCLUDES: • Comprehensive Adaptor Set • FREE leaflet dispenser & leaflets • Access to the Fortron-Zone forum • Listing on the Injector Max Garage Directory as featured on our website

£2

CHARITY DONATION

£1995.00

Fluid Accessories Part No.

Description

Price

53403600

Petrol System Cleaning Fluid

£18.49

53403700

Diesel System Cleaning Fluid

£18.49

53403800

Vactek Fluid Bottle

£11.99

53403900

Induction Service Kit - Petrol (Aerosol)

£11.99

53404000

Induction Service Kit - Diesel (Aerosol)

£17.49

53404300

Induction Service Kit - Petrol (Pouring Fluid)

£17.49

53402500

53401500

£2

£1995.00 Fluid Accessories Part No. 53401600

ALLOWS FOR UNATTENDED OPERATION

Fortron Automatic Transmission Fluid Flush Machine - Fully Auto

Description

Price

Coolant Flush Treatment Additive

£11.49

53404500 Fortron Power Steering Flush Machine

• Can replace up to 100% of transmission fluid • Specify exact amount of fluid to change • Digital control panel allows for fully automated control - Simply set amount to be exchanged and start • Safely cleans up and extends the service life of automatic transmissions • Includes comprehensive adaptor set

• Replaces 100% of steering fluid • Takes on average 10 minutes per service • Extends the service life of (often overlooked) system • Revitalises and conditions ‘o’ rings and seals

£3495.00

£2

CHARITY DONATION

£2

53405500

CHARITY DONATION

Fortron Automatic Transmission Fluid Flush Machine - Manual

£995.00

• Manual controls for ATF exchange process • Complete fluid exchange, including cooler, converter and cooler lines • Includes range of fittings and adaptors

£2199.00

£2

CHARITY DONATION

Fluid Accessories Part No. 53402600

Description

Price

ATF Flush Service Kit

£11.49

Fluid Accessories Part No. 53404600

Description

Price

Power Steering Flush Service Kit

£11.49

12 Packs are available for all Fortron Fluid Accessories. Ask your Distributor for details Further details of the Fortron range can be found on our website: www.sykes-pickavant.com

Tel: 01543 679900 www.sykes-pickavant.com

SUSPENSION

187 SUSPENSION PROGRAMME Adaptor Sets for Focus / Fiesta Trailing Arm Bushes

• For the removal and installation of trailing arm bushes • Adaptors can be used in a press frame with either a 18704100 pressure screw (recommended) or a hydraulic ram MADE IN THE UK *Note - Adaptor Ring 18780400 required

18732100 Adaptor Set for Fiesta Trailing Arm Bushes

18732200 Adaptor Set for Focus Trailing Arm Bushes

£99.95

For full application details, please visit our website: www.sykes-pickavant.com

OFFER £169.95 18771000 SAVE £30.00 Land Rover Swivel LIST PRICE £199.95 Ball Joint Adaptor Set

18700100 • Includes adaptor ring (18780400) for use with 08780000 and related press piece sets • Can also be used with SP 8 or 12 tonne hydraulic ram and press frame pressure screw

MADE IN THE UK

£1

18777000

OFFER £599.00

Land Rover Discovery 3 & 4 Suspension Bush Master Kit

SAVE £50.00

LIST PRICE £649.00

Specifically designed for removal of seized / corroded bushes and installation of replacement bushes for Land Rover Discovery 3/4 and Range Rover Sport models

• Available kits: - Master Kit - Front lower - Front upper Rear lower - Rear upper • Lower arm bushes can be replaced on vehicle without having to remove the wheel • Individual press frame pieces for each wishbone

180000V2

• Updated set now includes new cup for common aftermarket arms • For the removal and installation of ball joints on Mercedes Sprinter ‘95 -’06 and revised ‘06 onwards models (901, 902, 903, 904 and 906) • Applications: - Sprinter ‘95 onwards - VW Crafter & Sprinter ‘06 onwards - VW LT ‘96 - ‘06

CHARITY DONATION

Opel Movano / Renault Master / Nissan Interstar Ball Joint Adaptor Sets • For the removal and installation of upper and lower ball joints as fitted to the following: - Nissan Interstar ‘02 onwards - Opel Movano ‘98 onwards - Renault Master II ‘98 onwards

£99.00 187502V3 Adaptor Set - UPPER Ball Joint

£99.00 187503V3 Adaptor Set - LOWER Ball Joint

• Adaptor set from main kit (187512V3) for use on upper ball joints

• Adaptor set from main kit (187512V3) for use on lower ball joints

CAN ACHIEVE UP TO 4 TONNES OF MECHANICAL FORCE PRIOR TO HYDRAULIC OPERATION

150000XT

NEW

1500 Series 8 Tonne Extra Travel Ram

• Standard power unit for SP suspension products and is 50% more powerful than the original SP1500 Series 8 tonne ram, creating reliable power for tough applications • Kit now includes 2” extension and foam cut-out for storage

CHARITY DONATION

187403V3 £199.00 Mercedes Sprinter UPDATED SET Ball Joint Adaptor Set

NEW DESIGN UPGRADE FOR 2016 INCLUDES PRE-LOADING 30MM HEX

1800 Series 12 Tonne Hydraulic Ram

£198.95

Universal Press Frame

• New “on vehicle” solution for the removal and replacement of twin swivel ball joints as fitted onto the front axles of two popular Land Rover models: Discovery 2 ‘98 – ‘04 and Range Rover P38A ‘94 – ‘02

£99.95

Applications: C-MAX ‘07- MPV, MKI ‘98-’04, MKII ‘04-, Kuga ‘08-, Mazda 3 (BK) ‘03-’09, Mazda 5 (CR/CW) ‘05- MPV, Volvo C30 ‘06-, Volvo C70 II ‘07-, Volvo S40 II ‘04-’12, Volvo V50 ‘04-’12

Applications: Fiesta ‘95-’02, KA ‘96-’08, Puma ‘96-’02

• 90mm of travel allows for quick and easy job setting • In built hydraulic system - no external pump required • 4 x faster output operation than standard SP1500 Series ram

£329.00

£109.95

£1

CHARITY DONATION

“Fits all current 1500 Series Puller Range where the 1500 Series ram is used, the 18700100 universal press frame and 18780500 universal c-clamp for suspension work” Note: 18700100 Press Frame not included - See above for details

SUSPENSION BUY THE BEST!

08780000

08790000 XL Basic Kit - SUV / LCV

Universal Press & Pull Sleeve Kit Car / LCV Kit • Universal tool set for extracting and drawing-in of bushes, bearings, seals etc • Contains 20 x Press Sleeves in 2mm dia. steps • Inside Dia. Range: 34 - 72mm • Outside Dia. Range: 44 - 82mm

08785500 XS Sleeve Kit - Basic

£249.00

• For use as an add-on to the standard 08780000 kit (left) • Inside Dia. Range: 82 - 88mm & 98 - 104mm • Outside Dia. Range: 92 - 98mm & 108 - 114mm

IDEAL FOR BALL JOINTS

• For use as an add-on to the 08780000 kit (above) to increase applications for smaller bushes and ball joints • Contains 10 x Press Sleeves in 2mm dia. steps • Inside Dia. Range: 14 - 32mm • Outside Dia. Range: 24 - 42mm

£1

CHARITY DONATION

087304V2

£694.95

£379.00

08786500 • Stand alone kit for smaller bush applications • Contains 10 x Press Sleeves in 2mm diameter steps • Inside Dia. Range: 14 - 32mm • Outside Dia. Range: 24 - 42mm

ON VEHICL SOLUTIONE

OFFER £199.95

Ford & Volvo Rear Wishbone / Trailing Arm Bush Tool Kit

£325.00

XS Sleeve Kit - Master

SAVE £195.05

LIST PRICE £395.00

• Updated kit now also capable of installing & removing the longer bush as fitted onto the nearside of newer model Volvo cars • Suitable for: Ford: Mondeo / Mondeo Estate ‘07-, S-Max & Galaxy ‘06Volvo: XC70 & V70 ‘07-, XC60 ‘08-, S60 & V60 ‘10-

08135500

NEW

GEN3 Wheel Bearing Kit

ON VEHICL SOLUTIONE

• Designed to remove the hub and bearing from aluminium multi-link suspension units with the aid of a pressure screw, adjustable legs and top plate to accommodate the different size bearings as found on VW group vehicles • This procedure is currently carried out with repeated heavy blows using a hammer to remove the heavily corroded bearing which can easily damage surrounding components such as steering knuckles and ball joints or fracture the aluminium wishbone Applications: Audi: A4 00-, A5 07-, A6 97-, A7 10-, A8 94-, Q5 08-, R8 07Seat: Exeo 08- VW: Passat 03Bearing Reference: FAG: 5745, 5726, 5739, 5478, 5744 SKF: VKBA 6557, VKBA 3536, VKBA 6547, VKBA 6546, VKBA 6649 SNR-NTN: R157.45, R157.26, R157.40, R154.57, R157.43

CHARITY DONATION

081220V2 GEN2 All Sizes Master Kit

BESTSELLER

• 62 / 66 / 72 / 78 / 82 / 85mm sizes: - 62mm: Audi A2, VW Lupo (Front) - 66mm: Skoda Fabia, VW Fox (Front), Polo - 72mm: Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front) - 78mm: Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3 - 82mm: Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70 - 85mm: VW Multivan, Touareg, Transporter (Front / Rear)

£845.00

Individual Kits also available - Please contact Sykes-Pickavant for further information

£299.95

Tel: 01543 679900 www.sykes-pickavant.com

INDUCTION

SP INDUCTION HEATER RANGE - 3 VERSIONS NOW AVAILABLE! All Sykes-Pickavant Induction Heaters use high frequency magnetic fields to create induction heat. When ferrous metallic objects are placed inside these magnetic fields, they heat up in SECONDS expanding the metal which allows for fast and easy release • Operates cooler for better efficiency, handling and product longevity • Long operating cycle time • Includes 3 x coil attachments • Durable reinforced thermal plastic housing with slip resistant grenade style grip For further details please visit: www.sykes-pickavant.com

• Integrated CE filter improves handling of product • LED light illuminates work area • 1 year warranty - Parts/Labour • Carry Case with storage for all attachments

THE REST JUST CAN’T TAKE THE HEAT!

960200SP SP 230v Induction Heater + with SP Coil Kit (96015000 - see below) • Specifically designed for the UK/EU: 230v / 6 amp / 1000 watt with full CE certification

INCLUDES SP COIL KIT 96015000

9602012V

OFFER £645.00 SAVE £49.95

LIST PRICE £694.95

12V BATTERY OPERATED

SP 12v Induction Heater +

• Specifically designed for the UK/EU: 12v / 70 amp / 840 watt with full CE certification • Completely portable - works with any 12v battery pack or CHARITY 12v battery

£1

96021100

N.B. Not included

ONLY ONE ON THE MARKET!

DONATION

£595.00

IDEAL FOR SITE WORK

SP 110v Induction Heater +

• Specifically designed for the UK/EU: 110v / 6 amp / 1000 watt with full CE certification • Provides safe and near instant heat for site work, construction and factory maintenance users • Replaces the need for open flame options when CHARITY heating components, making the completion of DONATION on-site risk assessments far easier

N.B. Not included

£2

£595.00

Choose from the following accessories that are compatible with our full range of Induction Heaters 96015000 SP Coil Kit

£99.95

• 8 x popular sizes of interchangeable coils

960260SP SP Rope Coil Set - x3

96025000 SP Heat Pad

• Contains 3 x highly adaptable coils allowing user to shape to suit

• For the removal of decals, graphics, stripes, emblems & body mouldings etc • Softens the adhesive to make removal simple & effective

£74.85 Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United Kingdom Tel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901 e-mail: sales@sykes-pickavant.com www.sykes-pickavant.com ALL PRICES QUOTED EXCLUDE VAT & ARE SUBJECT TO AVAILABILITY - E&OE PRICES VALID UNTIL 30TH JUNE 2016 - REF: SPQ216GBP COPYRIGHT 2016 - SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED.

£67.95

CHARITY DONATION During this quarter (April - June 2016), for every product sold that features the green symbol, we will donate the indicated amount to our chosen cancer charity. For further details regarding our fundraising activities, please visit: www.sykes-pickavant.com

Distributor Stamp: