APRIL - JUNE 2015
Specialist Tool Solutions
NEW PRODUCTS & SPECIAL OFFERS UP TO 680Nm
NEW
NEW
NEW DESIGN CONCEPT 90201300 1/2� Impact Wrench - Ultra Short
Powerful short body specifically designed for use in confined spaces SEE PAGE 8 FOR FURTHER DETAILS
NEW
NEW DESIGN
31370000 Combined Petrol & Diesel Cylinder Leakage Tester
Helps to diagnose worn / broken piston rings, burnt / leaking valves and faulty head gaskets SEE PAGE 10 FOR FURTHER DETAILS
NEW SUITABLE FOR PETROL & DIESEL ENGINES
03490000 Speedyvac Brake Bleeder Kit
New compact size allows for easy operation SEE PAGE 20 FOR FURTHER DETAILS
53403500 Fortron Injector Max Machine
A simple & effective method of cleaning fuel systems without the removal of injectors from the vehicle SEE BACK PAGE FOR FURTHER DETAILS
www.sykes-pickavant.com
Tel: 01543 679900 www.sykes-pickavant.com
LCV SUSPENSION
NEW
08269000 Ford Transit Lower Arm Bush Tool
• For the removal and replacement of the large rear bush on the lower arms of Ford Transits from 2000 – 2013 • Designed to be used with a 187000V2 press frame and ram • On vehicle solution with minimal strip down • Can also be used in a workshop press for lower arms when they have been removed from the vehicle • Applications: Ford Transit Mk5 & Mk6 from 2000 to 2013 • OE Bush Numbers covered: 4042024, 4372132, 4540787 & 7372131
08756000
MADE IN THE UK
Ford Transit Bearing Press Kit
Successful removal of troublesome inner bearing race and reinstallation of complete bearing assembly • For the removal and installation of the front wheel bearing on Ford Transits 2000-2013 with the aid of a workshop press • Removes and installs bearings on both 5 and 6 stud hubs • Removes the inner and outer bearing race
Scan the QR code to watch an overview video of the Ford Transit Bearing Press Kit
MADE IN THE UK
£99.00
£199.00
082545V2
UPDATED KIT
Ford Transit Hub & Front Wheel Bearing Remover Kit
Updated slide hammer kit now includes larger hub plate and extra-long pillars to enable removal of hubs and front wheel bearings on six stud Transits • For Ford Transit Mk6 & Mk7 Hub and complete front wheel bearing removal • Features a heavy duty slide hammer which operates in two directions to achieve multiple operations in one tool • Provides three different solutions in one kit: - Can be used as a traditional hub puller - Remove the stubborn inner bearing race - Use the slide hammer in the reverse direction to remove the outer bearing race
3 IN 1 TOOL
£379.95 Outer Bearing Race Removal
Hub Removal
08255000
08255500
Ford Transit Press Upgrade Kit
• Set of tools to enable the original Transit Bearing Kit (08254500) and the 082545V2 kit (above) to be used in a workshop press • Suitable for use on Transits ‘00-’13 • Removes and installs bearings on both 5 and 6 stud hubs • Removes the inner & outer bearing race MADE IN THE UK
1
KEY
FOR USE WITH UNIVERSAL PRESS FRAME (18700100)
MADE IN THE UK
Inner Bearing Race Removal
MADE IN THE UK
Ford Transit Hub & Front Wheel Bearing Remover - Upgrade Kit
• Includes larger hub plate and extra-long pillars enabling owners of the original Transit Bearing Kit (08254500) to remove hubs and front wheel bearings on six stud Transits
£99.95 FOR USE WITH PRESS FRAME PRESSURE SCREW (18704100)
£76.95 FOR USE WITH SP 12T HYDRAULIC RAM (18000000)
FOR USE WITH WORKSHOP PRESS See page 15
FOR USE WITH AIR TOOLS See page 8
LCV SUSPENSION 187413V2
NEW
Mercedes Sprinter Ball Joint Tool including Press Frame & 12 Tonne Hydraulic Ram
• For the removal and installation of ball joints on Mercedes Sprinter ‘95 -’06 and revised ‘06 onwards models (901, 902, 903, 904 and 906) • Includes 187304V2 Adaptor Set (right) and Press Frame with 12 Tonne Hydraulic Ram • Adaptor set can be used in a workshop press • Applications: - Sprinter ‘95 onwards - VW LT ‘96 - ‘06 - VW Crafter & Sprinter ‘06 onwards
£399.00
12735000 Impact Force Screw & Shock Handle
• Heavy duty force screw with impact handle included, where shock action is required • Can be used as an alternative option in place of 8 and 12 tonne rams as used on SP Pullers and Press Frames
NEW
187403V2
OFFER £79.00 SAVE £15.90
LIST PRICE £94.90
MADE IN THE UK
Mercedes Sprinter Ball Joint Adaptor Set • Adaptor set only from 187413V2 - see left • Set can be used with either Universal Press Frame & Ram (187000V2) or a workshop press • Enables work to be carried out on the vehicle
£159.00
UPDATED KIT
187512V3
Opel Movano / Renault Master / Nissan Interstar Ball Joint Tool Kit • For the removal and installation of upper and lower ball joints as fitted to the following: - Nissan Interstar ‘02 onwards - Opel Movano ‘98 onwards - Renault Master II ‘98 onwards • Enables work to be carried out on the vehicle
187502V3 Opel Movano / Renault Master / Nissan Interstar Ball Joint Adaptor Set - UPPER Ball Joint • Adaptor set from main kit (187512V3 - left) for use on upper ball joints
£99.00 187503V3 Opel Movano / Renault Master / Nissan Interstar Ball Joint Adaptor Set - LOWER Ball Joint • Adaptor set from main kit (187512V3 - left) for use on lower ball joints
£399.00
£99.00
Ford Transit Ball Joint Tool • For the removal & installation of the lower front ball joints as found on Ford Transits 2000-2013 • On vehicle solution provides time saving benefits • Tool designed to access the awkward location of the ball joint • Manual option includes screw converter allowing the user to utilise an existing SP hydraulic ram • Hydraulic option includes 12 Tonne SP hydraulic ram
Part No.
Description
Price
08256000
Manual Option
£172.50
18256000
Hydraulic Option
£249.00
*Note - Hydraulic ram included in 18256000 only
ON VEHICLE SOLUTION
MADE IN THE UK
Scan the QR code to watch a video of the Ford Transit Ball Joint Tool - Hydraulic Version
COME & SEE US AT THE CV SHOW - NEC - 14-16 APRIL - STAND 4F31 2
Tel: 01543 679900 www.sykes-pickavant.com
COOLING 33165000 Speedfiller
NEW
• For replacing the coolant after opening or draining the system • Eliminates airlocks during refilling through the use of vacuum • Unique multi-fit cone for universal use • Also capable of connecting directly onto quick release cooling caps from 315, 316 and 317 Series kits using adaptor piece
£129.95 NEW
33145500 Universal Combustion Leakage Tester
33145000 XL Combustion Leakage Tester
• Fast and accurate diagnosis of cylinder head gasket leaks on HGV, commercial and plant engines • Quick connector for use with 33140000 and 331400V2 cap adaptors (see below) • Suitable for use with both petrol & diesel engines • Supplied with standard and sensitive reaction test fluid (250ml)
• Quick test combustion leakage tester • 25 to 50mm cone • Fast and accurate diagnosis of cylinder head gasket leaks • Suitable for use with both petrol & diesel engines • Supplied with standard and sensitive reaction test fluid (250ml)
£99.95 03195000
NEW
£84.95 NEW
HGV Airline Adaptor & Pressure Gauge Assembly • To be used on larger cooling systems i.e HGV to speed up the pressurisation process using a tyre inflater • Includes pressure relief valve to prevent over-pressurisation • 30psi / 2 bar gauge • For use with 33140000 and 331400V2 cap adaptors
331400V2
NEW UPDATED KIT
Updated kit now includes additional caps covering more: DAF, Renault, Caterpillar, Optare, MAN, Dart, Komatsu, JCB, Volvo construction and Agricultural vehicles
3
331595V2
Comprehensive applications listing provided with each kit
‘315’ Series Cooling System Test Kit
XL Cooling System Pressure Test Kit
• Contents: - 10 x Reservoir & Radiator Pressure Caps - High capacity metal bodied hand pump - Quick-Connect Hose Assembly • Dual Gauge measures both p.s.i (0-35) and bar (0-2.5) • Additional Pressure Caps available - refer to applications guide • Applications include: DAF / Iveco / MAN / Mercedes / Renault / Scania / Volvo plus wide ranging coverage for Plant / Construction / Military & Agricultural solutions
£149.95
£299.95
Scan the QR code to view an applications list
• All components of the ‘315’ range are fully compatible with older SP Cooling System Kits and can be used to upgrade previous generations of Cooling System Pressure Test Kits which are fitted with quick-release connectors. For older systems with a threaded connection, adaptor 03186870 is available • Contents: - Hand Pump with Pressure Gauge & Quick-Release fitting - Hose Assembly c/w quick-release fitting - 16 x Threaded Cooling System Cap Adaptors - 3 x Bayonet Fitting Cooling System Cap Adaptors / 1 x Cap Adaptor wrench
OFFER £235.00 SAVE £54.95
LIST PRICE £289.95
COME & SEE US AT MECHANEX - EVENT CITY - MANCHESTER - 19-20 MAY - STAND F21
LAND ROVER 18777000 Land Rover Discovery 3 & 4 Suspension Bush Master Kit
A comprehensive solution specifically designed for removal of seized / corroded bushes and installation of replacement bushes for Land Rover Discovery 3/4 and Range Rover Sport models • Available kits are as follows: - Master Kit - Front lower - Front upper - Rear lower • Only the bushes have to be replaced, saving the cost and time in replacing the complete arm • Lower arm bushes can be replaced on vehicle without having to remove the wheel • Individual press frame pieces for each wishbone • To be used in conjunction with the SP Universal Press Frame (18700100) and due to the nature of corroded components, the power of the SP 12 Tonne Hydraulic Ram is also required (18000000) (Can be purchased together as 187000V2 - Universal Press Frame c/w 12 Tonne Hydraulic Ram) • The SP 90206000 Vibro Impact Air Hammer and SP 96020000 Induction Heater can be used to assist in the removal of corroded suspension bolts and bushes - See QR code
- Rear upper
MADE IN THE UK
£649.00
Other available options Part No.
Description
Image
Price
18777100
Land Rover Discovery 3 & 4 Front Lower Kit
£259.00
18777200
Land Rover Discovery 3 & 4 Front Upper Kit
£169.00
18777300
Land Rover Discovery 3 & 4 Rear Lower Kit
£199.00
18777400
Land Rover Discovery 3 & 4 Rear Upper Kit
£169.00
03125000
Watch a video showing installation of the lower front arm bush
Watch a video showing removal of the lower front arm bush
£59.95
Land Rover Viscous Fan Tool Set
• Use both tools together to replace the cooling fan on Land Rover Discovery 3, Range Rover 3 and Range Rover Sport models (V6 engines only) • Extra long (650mm), thin design for easier working in confined spaces
18771000
18775000
MADE IN THE UK
Land Rover Swivel Ball Joint Adaptor Set
• New “on vehicle” solution for the removal and replacement of twin swivel ball joints as fitted onto the front axles of two popular Land Rover models: Discovery 2 ‘98 – ‘04 and Range Rover P38A ‘94 – ‘02 • Uses the Sykes-Pickavant 187 Hydraulic Series press frame to deliver 12 tonnes of force, for a “take the press to the vehicle” solution (Inc in 18771100 only)
£199.95
MADE IN THE UK
Land Rover Bush Adaptor Set
• For the efficient removal & refitting of bushes on traditional LR models • Dedicated shaped press pieces for correct location / alignment • For radius arm, panhard bushes & general suspension bushes • Suitable for: Defender, Discovery 1 & 2, Classic Range Rover, Range Rover P38A & older Series Land Rovers • Includes 6 adaptor pieces for use in a workshop press with suspension parts removed from vehicle - Can be used with a press frame or C Clamp N.B Requires 18775100 step plate *Note - With certain large radius arm bushes, the adaptor
£139.95
pieces can still be used with a workshop press or C Clamp
18775500 Land Rover Bush Kit Press Frame Option
• Kit includes 6 piece adaptor set (as above), multi-application step plate (18775100), press frame, adaptor ring and 12 tonne hydraulic ram
£429.95
KEY
FOR USE WITH UNIVERSAL PRESS FRAME (18700100)
FOR USE WITH PRESS FRAME PRESSURE SCREW (18704100)
FOR USE WITH SP 12T HYDRAULIC RAM (18000000)
FOR USE WITH WORKSHOP PRESS See page 15
FOR USE WITH AIR TOOLS See page 8
4
Tel: 01543 679900 www.sykes-pickavant.com
TORQUE 80080100
80080200
Torque Screwdriver 0.1 - 3.0Nm
Torque Screwdriver 2.0 - 10.0Nm
• Adjustable Torque Screwdriver with 1/4” sq drive • Supplied with 5mm hex key for torque adjustment • Scale graduated in 0.1Nm increments • Precise tool ideal for critical torque settings as found on TPMS Valve Cores and on low torque TPMS valve nuts
£82.95
80083000
£82.95
• Adjustable Torque Screwdriver with 1/4” sq drive • Supplied with 5mm hex key for torque adjustment • Scale graduated in 0.5Nm increments • Includes 3/8” sq dr handle for easier application of torque • Precise tool ideal for critical torque settings on most TPMS valve nuts • Also ideal for fitting of many other automotive components where precise torque is recommended - e.g. Sensors, Plastic Trim, Dashboard Components, Glow Plugs etc
SUPPLIED IN FOAM FOR TOOL BOX DRAWER
TPMS Comprehensive + Torque Tool Kit
• Set of tools for the correct application of critical torque settings when working with TPMS systems on modern vehicles • Contains all the appropriate tools for servicing and replacing TPMS Valve Cores and TPMS Valve Nuts • Supplied in foam - Ideal for tool box drawer • Contents: - Torque Screwdriver 0.1 - 3.0Nm - Torque Screwdriver 2.0 - 10.0Nm - 3/8” sq dr T-Bar Handle - for 80080200 - 1/4” Valve Core Tool - 1/4” Torx Bit T10 - 1/4” Torx Bit T20 - 1/4” Deep Socket 11mm - 1/4” Deep Socket 12mm - TPMS Grommet Tool - 1/4” one way ratchet for loosening valve stem - T-Handle Allen Key
£229.95
80093500 Universal Digital Torque Angle Gauge
• For turning torqued fasteners through a further angle, as per vehicle manufacturers’ specifications • Simple to use: Calibrate, set angle, mount and use • Magnetic attachment • One single tool can be used on 1/4”, 3/8”, 1/2”, 3/4” drives • Fits onto most ratchets, torque wrenches and power bars • Indicates increasing angle on LCD display • Works in both directions of rotation • Audible notice when setting reached • LED’s glow red when setting exceeded • LED’s glow yellow when close to setting and change to green when desired setting is reached
80010000
OFFER £124.95 SAVE £25.00
LIST PRICE £149.95
80020000
‘Motorq 100’ - 3/8” Push-Thru Torque Wrench
‘Motorq 200’ - 1/2” Push-Thru Torque Wrench
• 3/8” push thru sq dr • 20 - 100 Nm • 15 - 80lbs.ft • Length: 353mm • Weight: 0.73kg
• 1/2” push thru sq dr • 40 - 200 Nm • 30 - 150lbs.ft • Length: 442mm • Weight: 1.01kg
OFFER £102.95 SAVE £25.18
LIST PRICE £128.13
OFFER £119.95 SAVE £26.37
LIST PRICE £146.32
80030000 ‘Motorq 300’ - 1/2” Push-Thru Torque Wrench • 1/2” push-thru sq dr • 45 - 220lbs.ft • Weight: 1.40kg
5
• 60 - 300 Nm • Length: 570mm
OFFER £129.95 SAVE £30.92
LIST PRICE £160.87
TORQUE 80033000
80039900
OFFER £139.95 SAVE £36.86
‘Motorq 330’ - 1/2” Push-Thru Torque Wrench • 1/2” push-thru sq dr • 45 - 250lbs.ft • Weight: 1.40kg
‘Motorq 399’ - 3/4” Push-Thru Torque Wrench
LIST PRICE £176.81
• 3/4” push-thru sq dr • 60 - 300lbs.ft • Weight: 1.40kg
• 60 - 330 Nm • Length: 684mm
• 80 - 400 Nm • Length: 676.5mm
OFFER £205.95 SAVE £43.64
LIST PRICE £249.59
80040000
80050000
OFFER £369.95 SAVE £32.88
‘Motorq 400’ - 3/4” Push-Thru Heavy Duty Torque Wrench • 3/4” push-thru sq dr • 100 - 500lbs.ft • Weight: 6.30kg
OFFER £370.95 SAVE £41.10
‘Motorq 500’ - 3/4” Push-Thru Heavy Duty Torque Wrench
LIST PRICE £402.83
• 3/4” push-thru sq dr • 200 - 750lbs.ft • Weight: 7.30kg
• 150 - 700 Nm • Length: 1150mm
LIST PRICE £412.05
• 300 - 1000 Nm • Length: 1475mm
80055000 ‘Motorq 550’ - Stepped 3/4” to 1” Heavy Duty Torque Wrench • 1” Sq. Dr (uses ¾” to 1” stepped convertor) • 700 - 1500 Nm • 500 - 1000lbs.ft • Length: 1475mm • Weight: 10.40kg
OFFER £585.95 SAVE £32.13
LIST PRICE £618.08
Professional Torque Wrench Handles
NEW
• SP torque handles are developed from the ‘Motorq’ Professional torque wrench range, sharing the same high precision engineering and durability • For many applications a spanner end fitting rather than a socket is essential for access and time - saving on applications where using a socket is difficult and a spanner end fitting is ideal e.g. an engine bay pipe union • End fittings secure positively onto a 16mm diameter spigot using a lock and release mechanism
Popular Ring End Fittings
Torque Wrench Handles Part No.
Range
Part No.
Size mm
Price
80091300
13
£51.95
Weight (Kg)
80091400
14
£51.95
Length
Price
80091500
15
£51.95
Nm
lbf.ft
80091000
8-60
5-45
301mm
0.55
£105.00
80091600
16
£51.95
80093000
40-200
30-150
423mm
0.78
£110.00
80091700
17
£51.95
80091800
18
£51.95
80091900
19
£51.95
17mm Ring End Fitting
Available fittings sizes from 7 - 27mm / 1/4” - 11/16” - Ask for details Other fittings (Open Ends / Flare Ends) are also available - Ask for details
‘Motorq’ Heavy Duty Torque Multipliers
• Single stage epicyclic gears, producing a 5 : 1 multiplication ratio • Use with conventional torque wrenches for heavy duty applications • Supplied with reaction bars, in plastic storage case • After-sales service available Part No.
Input Dr.
Max. Input
Output Drive
Max. Output
Weight (kg)
Price
80060000
1/2” sq dr / 32mm hex
260Nm
3/4”
1300Nm
4.3
£659.00
80065500
3/4” sq dr / 36mm hex
540Nm
1”
2700Nm
4.5
£659.00
6
Tel: 01543 679900 www.sykes-pickavant.com
WORKSHOP TOOLS SP Induction Heater + with SP Coil Kit
TWO VERSIONS AVAILABLE - 110v / 230v
Key features of the SP Induction Heater + (Both 110V & 230V models) • Operates cooler for better efficiency, handling and product longevity • Full CE certificate • Long operating cycle time • LED light illuminates work area • 1 year warranty - Parts/Labour • Includes rope, u-form & pre-formed coil
• Carry Case with storage for all attachments • A true 1,000 watts max output power available • Integrated CE filter improves handling of product
960200SP
SP Induction Heater + with SP Coil Kit (96015000 - below)
• Specifically designed for the UK/EU: 230v / 6 amp / 1000 watt
STAR BUY SAVE £49.95
PURCHASE 960200SP (ABOVE) FOR:
OFFER £645.00 SAVE £49.95
LIST PRICE £694.95
INCLUDES
96015000
SP Coil Kit
NEW
96021100
SP 110V Induction Heater +
• Specifically designed for the UK/EU: 110v / 6 amp / 1000 watt • Designed for site work where only 110 Volt power is permitted • Provides safe and near instant heat for site work, construction and factory maintenance users, providing a small, fast and flexible tool in place of open flame options when heating components • Time saving tool ideal for use in all environments and makes the completion of on-site risk assessments far easier
£645.00
96015000 SP Coil Kit
£99.95
• 8 x popular sizes of interchangeable coils • Supplied in protective case
88050000 1/2” Impact Bar
NEW
02251000 Stud Remover & Installer Kit
£69.95
68786000
£69.95
66050400 Vehicle Fluid Change Syringe - 200cc
• Transparent design to easily view the fluid • Suitable for fluid suction and supply in vehicle service • Composite plastic resistant to brake fluid & antifreeze • 200cc capacity with quick disconnect tube
SAVE £5.00
LIST PRICE £24.95
7
NEW
• Unique design allows the installation & removal of studs without damaging the threads • Each stud size includes 1 x removal & 1 x installation tool • Installation tool allows tightening & torque without thread damage • Kit includes: M6 x 1.0 / M8 x 1.25 / M10 x 1.25 / M10 x 1.50 studs
NEW
Universal Extender - 340mm
• For loosening rusted or seized bolts using impact force • Use with impact sockets and driver bits • Bi-directional – use to loosen or tighten fasteners • Impact absorbing composite handle • Swivel head aids with operation in limited access situations • Produces 8 x torque multiplication with each hammer blow
OFFER £19.95
Shown for illustrative purposes only
• Provides additional leverage in a secure manner • Ideal for use with sockets, spanners, allen keys etc • Loosens tight connections on hard to reach areas
£29.95 66095100
Vehicle Fluid Change Syringe - 1.5L • Transparent design to easily view the fluid • Ideal for applications such as engine / gear oil & differential fluid • 1.5L capacity & rotative switch off • Suitable for fluid suction and supply in vehicle service
OFFER £41.50 SAVE £8.45
LIST PRICE £49.95
AIR TOOLS High Quality Air Tools that set the standard for Torque!
PURCHASE ANY AIR TOOL AND SERVICE / LUBRICATION KIT TOGETHER & RECEIVE A FREE STORAGE CASE Impact Wrench Specifications: Part No.
Drive
Max Torque Nm (Reverse)
Torque Nm (Fwd)
Noise (dBA)
Air Consumption (l / min)
902010SK
1/2”
1600
1084
94.2
135
1.8
1/2”
680
500
93.5
130
1/2”
680
500
95
902020SK
3/4”
2600
2000
902025SK
3/8”
680
902035SK
1/4”
902045SK
1”
902015SK (Mini)
902013SK (Ultra-Short)
Service & Lubrication Kit Price
Combined Price
Storage Bag
£179.00
£17.95
£196.95
FOC
1.08
£169.00
£17.95
£186.95
FOC
134
1.3
£159.00
£17.95
£176.95
FOC
97
210
3.2
£499.00
£17.95
£516.95
FOC
500
93.5
130
1.08
£169.00
£17.95
£186.95
FOC
90
90
98.2
105
0.9
£139.00
£17.95
£156.95
FOC
3100
2200
110
305
6.8
£849.00
£17.95
£866.95
FOC
Weight Impact (kg) Wrench Price
Note: If ordering an air tool on its own, replace the SK reference at the end of the part number with ‘00’ Other specialist air tools including the ‘Bionigrip’ range of Air Die Grinders, Micro Die Grinder and Air Drill are also available visit www.sykes-pickavant.com for further details Optional Extra: 90201100 - Rubber Boot for 1/2” Impact Wrench (90201000) also available
90215000
NEW
£17.95
1/2” Impact Wrench Ultra Short
• For servicing air tools • Includes 1 x bottle of air tool oil, 1 x tube of air tool grease, applicator nozzle and grease press £5.95
90215200 - 1 x tube of air tool grease (100g)
£6.95
90215300 - 1 x grease press
£8.95
90220000 Universal Air Swivel Joint Inlet
£14.95
• 2 x 360° rotation • Industrial quality • Heat treated connecting screw
90210000 Signal Hose - 10mm (3/8”) • Length: 10 metres • Abrasion resistant outer cover • High-visibilty hose to reduce trip hazard • Working temp range: -40°c to +65°c • Working pressure: 300psi • Break pressure: 1000psi N.B. Hose supplied without fittings
£29.95
NEW
90201300
Air Tool Service & Lubrication Kit
90215100 - 1 x bottle of air tool oil (250ml)
90201000
• Extremely short body specifically designed for use in confined spaces • See table above for specs
£159.00
90206000 ‘Vibro-Impact’ Air Hammer
OFFER £275.00 SAVE £60.00
LIST PRICE £335.00
• A unique concept to aid the removal of seized suspension parts • The ‘Vibro-Impact’ system allows for the controlled application of force via an air powered impact hammer • Allows the operator to control & gradually increase the force being applied, in order to loosen seized components • High visibility green handle to help reduce trip hazard • Features a built-in shock-absorber in order to minimise risk of damage if too much pressure is accidentally applied • Low vibration for user comfort • Supplied with a handy wall mounted Scan the QR code to storage bracket and a set of four impact watch a video of the hammers for variable applications ‘Vibro-Impact’ Air Hammer
8
Tel: 01543 679900 www.sykes-pickavant.com
DIESEL INJECTOR Hydraulic Injector Puller Systems
Updated kits now include a set of solenoid sockets (01513500) and 2 x tamperproof sockets • For the removal of stubborn injectors • Provides controlled force to aid the removal of seized injectors where there is insufficient access for traditional slide hammers • Uses a multi-position frame, with adjustable legs of different lengths and a selection of mounting adaptors to allow alignment of the tool with the injectors on a wide variety of modern diesel engines • Supplied with injector adaptors for most modern injector types: M14 | M16 | M17 | M20 | M25 | M27
185800V2SP
FREE
PSA Adaptor Plate (18583000) A bespoke add on kit for use on PSA 2.0 & 2.2 litre HDi diesel engines
&
M9R Renault Kit (18582500) Applications: Renault / Nissan / GM – Dci 2 litre engines (M9R)
WHEN YOU PURCHASE 185800V2SP OR 185810V2SP WORTH £101.90 185810V2SP
Hydraulic Injector Puller Kit
Mechanical Hydraulic Injector Puller Kit
• 10 tonnes Hydraulic Hollow Cylinder provides the force – use with standard hydraulic pump (not supplied)
• As per 185800V2SP kit (left) but includes a mechanical hydraulic ram • Allows use of the kit ithout the need for a separate hydraulic pump
£999.95
£1199.95
017500V2 Diesel Injector Seat Cleaner Set
STAR BUY
• Cleans injector seats and chambers when changing or reconditioning diesel injectors • Helps to avoid blow-back due to poorly seated injectors • Now includes: - Removal tool for copper washers - Wire brush cleaning set for chamber walls - Injector blanking plugs to avoid debris entering the cylinders - Centralising stem to improve correct cleaning seating angle
085930V2 Glow Plug Removal Kit
NEW UPDATED KIT
Updated kit now includes additional parts - 6 x extractor sockets - 1 x dual size high tensile step drill - 1 x narrow pulling unit set - 1 x drill holder extension - 2 x taps - 2 x drill bits - 2 x glow plug chamber cleaning brushes • For removing damaged and broken glow plugs from cylinder heads • Ideal for use where a glow plug has sheared off just below the hex, or flush with the cylinder head • Removes 8mm & 10mm glow plugs (M8 x 1.0 thread or M10 x 1.0 thread) • Comprehensive kit includes all necessary adaptors, centering and thread cleaning tools to safely remove the damaged glow plug without damaging the cylinder head OFFER £199.95 • Supplied in case with foam
SAVE £50.00
LIST PRICE £249.95
9
£175.00 SAVE £44.00
08585000 Heavy Duty Slide Hammer Injector Remover Kit
• For removal of Bosch, Delphi, Denso and Siemens injectors • Features a flexible u-joint adaptor for access in restricted areas • Contains: - 6 x Injector adaptors: M14 x 1.5, M16 x 1.0, M17 x 1.0, OFFER £245.00 M20 x 1.0, M25 x 1.0, M27 x 1.0 SAVE £50.00 - 4 x Injector Solenoid removers: LIST PRICE £295.00 M25, M27, M29, M30 - 2 x Nozzle Extractors: 6mm Tamperproof: 10mm hex 7mm Tamperproof: 10mm hex • Heavy Duty Slide Hammer: Hammer Weight: 5.0kg (Total Weight: 8.0kg)
COMPRESSION & PRESSURE TESTING Combined Petrol & Diesel Cylinder Leakage Tester Kit
NEW
31370000 • An alternative to conventional compression testers, which provides a direct indication to the location of the leak by measuring the rate of loss of compression for individual cylinders • Helps to diagnose worn / broken piston rings, burnt / leaking valves and faulty head gaskets • Includes a selection of glow plugs and an adjustable dummy injector for modern diesel engines. The adaptors are also compatible with diesel compression testers - see below • Supplied with M12 and M14 brass quick release spark plug adaptors to suit most modern petrol cars • Adaptors from petrol compression kits and diesel common rail kits are also compatible with the cylinder leakage tester
31370000
£249.95
31370500 Petrol only Cylinder Leakage Tester Kit • As per kit above excluding glow plugs and dummy injector
03965500 M14 / M18 Long Reach Spark Plug Adaptor
£149.95
314200V2 Diesel Engine Compression Test Kit Standard Car Kit
• For both direct and indirect diesel injected engines • Checks engine compression under cranking conditions • Enables cylinder access through dummy injector and glow plug adaptors • Built-in pressure relief valve enables repeat tests without dismantling • Supplied in plastic case with foam insert OFFER £215.00 • 560mm Rubber Hose SAVE £31.95 LIST PRICE £246.95 • Gauge Scale: 0-60bar, 0-860psi
31405000 Petrol Engine Compression Tester
• Specially designed for deep seated spark plug ports with long narrow threads • Positive lock - quick release connector, ensures adaptors cannot accidentally be left in the spark plug port (which would then become extremely difficult to remove with deep seated plug ports) • Specially designed self-centering adaptors OFFER £156.50 ensure minimal risk of cross SAVE £19.45 LIST PRICE £175.95 threading when attempting to screw the compression adaptor into the spark plug port • Supplied in plastic case with foam insert • Gauge Scale: 0 - 20bar, 0 - 190psi
Twin gauge system showing input pressure and percentage of pressure loss to give indication of the condition of the engine
£19.95
31427500 Diesel Engine Compression Test Kit Common Rail Diesel (CRD) • Covers a wide range of modern CRD diesel injected engines • Checks engine compression under cranking conditions • Enables cylinder access through dummy injector and glow plug adaptors • Built-in pressure relief valve enables repeat tests without dismantling OFFER £375.00 • Supplied in plastic SAVE £24.95 case with foam insert LIST PRICE £399.95
31470000 Oil Pressure Test Kit
• Helps to diagnose worn oil pumps and engines, faulty oil pressure switches and pressure warning indicators • Shock protected dual scale gauge, for quick & accurate oil pressure checks • Permanently oil primed, 1m long flexible hose, enables access to difficult to reach oil switch ports • Small profile, quick coupling adaptors with built-in shut-off valve • 10 x oil switch port adaptors OFFER £169.95 • Supplied in plastic case with SAVE £13.00 LIST PRICE £182.95 foam insert • Gauge Scale: 0 - 10bar, 0 - 150psi
10
Tel: 01543 679900 www.sykes-pickavant.com
PRESSURE TESTING
PRESSURE
COMPRESSION
PETROL
DIESEL
31400000
314200V2
Petrol Engine Compression Tester
314295V2 Diesel Engine Compression Test Kit Premier Car Kit
Diesel Engine Compression Test Kit Standard Car Kit
31402000 Petrol Engine Compression Tester - Extra Long Hose
31405000
31427500
Petrol Engine Compression Tester Quick-Release Kit
31400300 Petrol Engine Compression Tester Kit
Diesel Engine Compression Test Kit - Common Rail Diesel (CRD)
31430000
31400900 Extra Long Flexible Adaptor M14 x 158mm (Ford Zetec)
Diesel Engine Compression Test Kit - CV
31401100 Extra Long Flexible Adaptor M12 x 380mm
31370500 Cylinder Leakage Tester Petrol only
314285V2
PETROL & DIESEL 31370000 Combined Petrol & Diesel Cylinder Leakage Tester
11
Diesel Engine Compression Test Kit - Land Rover
PRESSURE TESTING
E TESTING
FUEL
PETROL
DIESEL
314875V2
314650V2 Common Rail Diesel (CRD) High Pressure Test Kit
Fuel Injection Pressure Test Kit for Petrol Engine Vehicles
Common Rail Diesel (CRD) High Pressure Test Set
31488000
31467500
Ford EECIV Flexible Adaptor
314860V2 Petrol Engine Compression Tester Quick-Release Kit
31488500 Fiat / GM Quick-Connect Adaptor
314660V2
Diesel Fuel System Bleeding Kit
31467000 Diesel Fuel System Bleeding Kit Master Kit 31467600 Ratchet Pump Kit
31489000 Renault (10 / 12mm) Adaptor
31461000
31485000
Common Rail Diesel (CRD) Low Pressure Test Gauge Kit
Fuel Injection Schrader Valve Connector Kit
31460000 31489500 Fuel Injection Pressure Test Kit for Schrader Test Ports
31486500 Fuel Injection Schrader Valve Connector Kit for Fiat Group
Common Rail Diesel (CRD) Low Pressure Combined Kit
31462000 Common Rail Diesel (CRD) Fuel Return Flow Kit
31485300 Comprehensive Schrader Valve Test Set
PETROL & DIESEL 31468000
31469000
Petrol Engine Compression Premier Low Pressure Tester Quick-Release Kit Fuel Test Kit
314925V2 VW Group Fuel Pump Pressure Test Kit for PD (Diesel) & FSi (Petrol) Engines
31492000 VW Group Fuel Pump Pressure Test Set (PD)
12
Tel: 01543 679900 www.sykes-pickavant.com
SUSPENSION ALREADY HAVE ONE OF THESE??.... 08780000 Universal Press & Pull Sleeve Kit - Car / LCV Kit
£379.00
• Contains 20x Press Sleeves in 2mm diameter steps • Inside Diameter Range: 34 - 72mm • Outside Diameter Range: 44 - 82mm • 4x Step Plates / 4x Pulling Spindles with thrust bearings
....THEN THE NEW XS SLEEVE KIT IS A GREAT ADDITION! 08785500 XS Sleeve Kit - Basic
• For use as an add-on to the Standard Press & Pull Sleeve Kit (08780000 - above) to increase applications for smaller bushes • Contains 10 x Press Sleeves in 2mm diameter steps • Inside Diameter Range: 14 - 32mm • Outside Diameter Range: 24 - 42mm • Includes extension spindle with thrust bearing, lock nuts and grease • Supplied in moulded storage case
£249.00
COMBINED OFFER
PURCHASE 08780000 UNIVERSAL PRESS & PULL SLEEVE KIT & 08785500 XS SLEEVE KIT (ABOVE) FOR A SPECIAL OFFER PRICE 087800SP Universal Press & Pull Sleeve Kit c/w XS Sleeve Kit - Basic
+
08786500 XS Sleeve Kit - Master
= £578.00 SAVE £50.00
£325.00
• Stand alone kit for smaller bush applications • Contains 10 x Press Sleeves in 2mm diameter steps • Inside Diameter Range: 14 - 32mm • Outside Diameter Range: 24 - 42mm • Includes 2 x spindles, 4 x stepped back plates, extension spindle with thrust bearing, lock nuts & grease • Supplied in moulded storage case
08790000 Universal Press & Pull Sleeve Kit - SUV / LCV
• For use as an add-on to the Standard Press & Pull Sleeve Kit (08780000 - above) • Allows access to a wider range of vehicles OFFER £675.00 SAVE £150.00 - e.g. SUV’s & LCV’s LIST PRICE £825.00 • 2 x 20mm Pulling Spindle Adaptors with Thrust Bearings M20 • 8 x Press Sleeves in 2mm diameter steps • 4 x Step Plate Discs • Inside Dia. Range: 82 - 88mm & 98 - 104mm • Outside Dia Range: 92 - 98mm & 108 - 114mm
18705500
NEW LOWER PRICED SOLUTION
Press Frame Extension Legs & Nose Piece
• New kit designed for use with the 0878 range of sleeve kits • Extends the 187 press frame - internal capacity from 200 to 300mm • Pair of 100mm legs fit onto original 187 press frame legs • Extra extension legs can be added to further increase length • Nose piece connects press frame ram with 4 x step plate discs from the 0878 range of sleeve kits
13
KEY
FOR USE WITH UNIVERSAL PRESS FRAME (18700100)
FOR USE WITH PRESS FRAME PRESSURE SCREW (18704100)
FOR USE WITH SP 12T HYDRAULIC RAM (18000000)
MADE IN THE UK
£49.95 FOR USE WITH WORKSHOP PRESS See page 15
FOR USE WITH AIR TOOLS See page 8
SUSPENSION
087304V2
NEW LOWER PRICE!
ON CAR SOLUTION
Ford & Volvo Rear Bush Tool Kit
Updated kit now also capable of installing & removing the longer bush as fitted onto the nearside of newer model Volvo cars • Individual press piece kit for dismantling and installing the rear wishbone / trailing arm bush • Correctly aligns & sets bush depth in trailing arm upon installation, so not to tear bush • Suitable for: Ford: Mondeo & Mondeo Estate ‘07-, S-Max & Galaxy ‘06Volvo: XC70 & V70 ‘07-, XC60 ‘08-, S60 & V60 ‘10-
OFFER £279.00
Adaptor Sets for Focus / Fiesta Trailing Arm Bushes • For the removal and installation of trailing arm bushes • Adaptors can be used in a press frame with either a 18704100 pressure screw (recommended) or a hydraulic ram *Note - Adaptor Ring 18780400 required
18732100
LIST PRICE £395.00
05050000 Land Rover Drop Arm Puller
£99.95
MADE IN THE UK
Adaptor Set for Fiesta Trailing Arm Bushes • Bush OEM reference numbers: 1011363, 1016439, 96FB5K653CA • Applications: Fiesta ‘95-’02, KA ‘96-’08, Puma ‘96-’02
£99.95
18732200
SAVE £116.00
Suitable for both standard and new longer bushes
For a full applications list, please visit our website - www.sykes-pickavant.com
Adaptor Set for Focus Trailing Arm Bushes • Bush OEM reference numbers: 1 061 670, 1304124 • Applications: C-MAX ‘07- MPV, MKI ‘98-’04 (Estate, Hatchback, Saloon, Van), MKII ‘04- (Convertible, Hatchback, Saloon, Van), Kuga ‘08- Off Road, Mazda 3 (BK) ‘03-’09 (Saloon, Hatchback), Mazda 5 (CR/CW) ‘05- MPV, Volvo C30 ‘06- Hatchback, Volvo C70 II ‘07- Cabrio, Volvo S40 II ‘04-’12 Saloon, Volvo V50 ‘04-’12 Estate
• Extra heavy duty puller for the removal of drop arms from the toughest of vehicle applications • Ideal for Land Rover Discovery 1 & 2, Range Rover P38, Land Rover Defender and Ford Transit applications • The puller is designed to be used with the steering box already removed from the vehicle • Includes a force screw allowing a technician to effectively shock the drop arm to become loose from the steering box OFFER £179.00 • Jaw spread capacity - 60mm SAVE £20.95 • Jaw reach capacity - 80mm LIST PRICE £199.95
180700V2
08065000 3-Size Ball Joint Separator
• Ideal for use on vehicles: Audi / VW (A3, A4 and A6 with double wishbone), BMW & Mercedes-Benz • Drop forged rugged, flat design with three interchangeable forks - 24, 27 and 31mm • Forks are attached to the centre screw to allow continuous adjustment within the jaw capacity range • Features an internally operated drive spindle (M24) and an elongated recess in the forks, providing a safe & secure operation • Jaw capacity range: 30 - 65mm
£159.00
12 Tonne Hydraulic Ball Joint Separator Updated kit now uses power from the SP 12 tonne hydraulic ram • Hydraulic version of the 08070000 HGV Ball Joint Separator (below) OFFER £219.95 • Specification: SAVE £70.00 - Jaw Opening: 70mm LIST PRICE £289.95 - Jaw Throat Width: 36mm - Jaw Throat Depth: 50mm
08070000 Ball Joint Separator – HGV applications
OFFER £115.95 SAVE £24.00
LIST PRICE £139.95
• Strong, heavy duty body with strengthened fork and lever allows for greater force to be applied • Can be upgraded to hydraulic power • Jaw Opening: 70mm Jaw Throat Width: 36mm Jaw Throat Depth: 50mm
COME & SEE US AT THE CV SHOW - NEC - 14-16 APRIL - STAND 4F31 14
Tel: 01543 679900 www.sykes-pickavant.com
WORKSHOP EQUIPMENT NEW Silver Series range of Hydraulic Workshop Presses equipped with a two-speed manual pump, overload safety valve, automatic arm back-run system and V blocks • Welded, heavy duty steel frame • Two speed pump • Automatic arm return • Pressure gauge • Manufactured in the EU • Piston over-travel limit stop • Winch for table (For models 53436400 & 53436500)
• Overload safety valve • V blocks
Rating
Height (mm)
Width (mm)
Depth (mm)
Bed Depth (mm)
Range (mm)
Weight (kg)
Price
53436000*
15T
1930
920
650
170
85 - 950
150
£549.00
53436200*
20T
2030
940
650
180
65 - 1030
165
£669.00
53436400*
30T
2060
1120
650
200
115 - 1020
230
£989.00
53436500
50T
2290
1220
650
210
70 - 1065
370
£1549.00
Part No.
*Recommended for use with Universal Press Support Block - 08770000
53451000 15-20T Press Plate
£49.95
Other sizes of press are available - Contact Customer Services for details
NEW
53451500
• Galvanised accessory box useful for storing press piece sets etc • Includes hanging hook
£54.95
NEW
53453000 30-50T Press Piece Set
15-20T Press Piece Set
• Includes one adaptor & three press pieces • Sizes: 10, 18 and 24mm diameter
£9.95
NEW
OFFER £89.00 SAVE £16.00
36600500
53390000
• Retrieve fuel following a filling error, removal of tank sender unit, changing or checking the fuel gauge, rinsing the fuel tank during body work etc • Stainless steel mobile 45‐litre tank • Cleanly draws up or pushes out fuel due to a venturi system • Includes 2 anti‐static ground cables, overflow line and 3 fuel probes • Emptying via the tank filler neck or fuel lines
WARNING: Do not use with corrosive or inflammable products
Adaptor Set for 36600500
15
KEY
SAVE £16.00
LIST PRICE £115.00
£429.00
Fuel Extractor / Retriever
• Remove and extract waste fluids or oil from an engine with flexible PV tube and robust probe • Powered from compressed air • 70L tank capacity • Adjustable 10L oil capture pan • Visible fill level indicator • 1 - 2 L/Min Suction capacity depending on nozzle used • Working pressure 8-10 Bar • Empty tank with compressed air at maximum 1 bar pressure • Includes selection of PV tubes to cater for different lengths and diameters of dipstick tubes
£269.00
OFFER £99.00
• Includes one adaptor & six press pieces • Sizes: 5, 10, 14, 18, 24 and 29mm diameter
LIST PRICE £105.00
Pneumatic Oil Extractor
NEW
53451200 Accessories Box
• Heavy duty plate sits on press bed with hole to push components through
53451100 30-50T Press Plate
NEW
2m long fuel probe also available (366005-13)
£24.95
NEW
36600700 • Set of fittings to allow 36600500 (above) to connect in line, before the injection pump (on most fuel systems) for safe emptying of fuel
£24.95
FOR USE WITH UNIVERSAL PRESS FRAME (18700100)
FOR USE WITH PRESS FRAME PRESSURE SCREW (18704100)
FOR USE WITH SP 12T HYDRAULIC RAM (18000000)
FOR USE WITH WORKSHOP PRESS See page 15
FOR USE WITH AIR TOOLS See page 8
TESTING 306610V2 TPMS - Tyre Pressure Monitoring - Sensor Testing, Activation & Clone Valve Programming Tool
£695.00
Sensor Activation - Sensor Checking - Sensor Replacement
306615V2 TPMS PLUS - High Level Diagnostic TPMS Tool
T & FIX DI ! IT!
£1295.00
All the features of the TPMS Tool (306610V2 - above) PLUS the following additional features: • Connects to TPMS ECU via EOBD diagnostic lead (Containing full multiplexing functionality) • Sensor re-programming via the EOBD socket • Sensor & TPMS ECU fault code reading / deletion
REA
• Able to re-program “Clone” valves wirelessly without using a PC or docking station • Approved for use with Schrader & Alligator EU frequency re-programmable TPMS valves • Includes sensor replacement, technical and tyre rotation procedures - Step by step guidance for valve cloning - Sensor replacement procedures
For further details and to read more about TPMS and its features, please visit our website: www.sykes-pickavant.com
325200SP Portable 4 Gas Analyser with Printer
£1495.00
Developed from the 32420000 gas analyser • For fault diagnosis, tuning and pre-MOT testing • Truly portable hand-held gas analyser - Ultra light weight - only 1.1kg • Measures CO, HC, CO2, O2 (NOx model option available on request) to Class 1 accuracy • Suitable for both petrol and LPG vehicles and ideal for both static and dynamic testing • Internal memory stores up to 250 test results - manual & automatic recording options • Provides Lambda / AFR measurement and corrected CO • Pump speed control - Improves battery life • Up to 4 hours internal battery life • Bluetooth connectivity to PC (additional software required) • Large graphic display • Free analytical software available to download • Includes printer and AC / 12v chargers
30077500 EGR Valve Activator
• For testing & cleaning valve as part of routine servicing - no need to remove valve from vehicle for use • Prevents the unnecessary replacement of EGR Valves • Actuates EGR Valves in a fixed open position for cleaning, and in an open / closed sequence for freeing carbon deposits • Choice of two test cycles: At the end of either test cycle the tool gives an audible indication when a faulty and unserviceable EGR valve is connected • Supplied with x3 connectors for different makes of valves OFFER £189.00 • Power Supply: 220 ‐ 240V mains Open / Close Time Cycle: 90 sec SAVE £10.95 LIST PRICE £199.95 • Includes applications list - visit www.sykes-pickavant.com for details
MV8550 Mityvac Silverline Elite Automotive Kit
OFFER £115.95 SAVE £14.00
LIST PRICE £129.95
• Ideal for a variety of workshop tasks requiring vacuum and / or pressure featuring a dual convertor to switch from vacuum to pressure • Ideal for a variety of diagnostic tests which require a pressure source - e.g. EVAP sensors, Cooling system leak tests etc • Ideal for a variety of workshop tasks requiring vacuum and / or pressure - e.g. Diagnostics, brake bleeding, fluid transfer, evacuation, sampling etc
01490000 Professional Circuit Tester
• 6 / 12 / 24 volts • Robust handle with hardened steel probe • 1.5m heavy duty insulated rubber lead • Uses standard automotive bulb to indicate continuity
OFFER £15.95 SAVE £4.00
LIST PRICE £19.95
COME & SEE US AT MECHANEX - EVENT CITY - MANCHESTER - 19-20 MAY - STAND F21
16
Tel: 01543 679900 www.sykes-pickavant.com
COIL SPRING COMPRESSION 08450000
OFFER £495.00 SAVE £100.95
Internal Coil Spring Compressor
LIST PRICE £595.95
• Specially designed for vehicles with front or rear wishbone suspension • Designed to fit applications where the access hole in the lower wishbone is as small as 30mm diameter • Unique Torque Safety Key extends functionality and adds safety - 100Nm max torque and allows for use with an impact wrench • Supplied with two pairs of specialist jaws from 90mm to 140mm diameter • Safe working load of 2500kg (25000N) • Fits a wide variety of vehicles with wishbone suspension including: BMW / Citroën / Chrysler / Honda / Hyundai / Kia / Mazda / Mitsubishi / Peugeot / Renault / Seat / Skoda / Suzuki / Toyota / Volvo / Volkswagen • Full applications list included & also available on our website: www.sykes-pickavant.com
08400000 Extra Heavy Duty Coil Spring Compressor c/w Universal Multi-Purpose Jaws
SAVE £114.00
LIST PRICE £589.00
• Safe working load 2250kg (22500N) • Supplied with 1 x pair of universal MULTIPURPOSE jaws - Patented innovative shape of jaw design fits most types and sizes of springs - Protective high-tech inserts in jaw for added safety - Jaws diameter 80-200mm covers 90% of applications • Built-in protective accessory for vice clamping • Overload shear pin for safe operator use • Large user friendly adjustable handle fo fast jaw positioning • Specialist jaw options available • TUV approved • Supplied with instructions & vehicle applications
Heavy Duty Coil Spring Compressor
Unique Sykes-Pickavant design of vice-mounted Coil Spring Compressor • Features double-ended hex drive OFFER £399.00 SAVE £70.00 (2 x 24mm hex) for ease of use LIST PRICE £469.00 - Can be operated from either end using ratchet or 24mm wrench - Can be safely unwound in the event of shear pin failure • Hex drives at both ends, incorporate shear-pins for safety - Features external thrust bearing for ease of service - Heat treated, Self-lubricating operating screw • Safe Working Load = 15000N • Supplied with two sets of universal jaws: - Medium Jaws: 110-150mm dia - Large Jaws: 140-195mm dia Note: 084000 Series jaws can also be used with 08390000 (Requires 08393200 Screws) N.B. Not recommended for use with Air / Electric Impact Power Tools
17
FOR USE WITH UNIVERSAL PRESS FRAME (18700100)
Specialist Jaw for Extra Heavy Duty Coil Spring Compressor
NEW
• Specialist jaw for Extra Heavy Duty Coil Spring Compressor (08400000 - left) • For counter clock springs as typically found on Honda HR-V / CR-V and Prelude vehicles • Suitable for spring diameters: 145 - 195mm
OFFER £59.95 SAVE £15.00
LIST PRICE £71.95
38680000
08390000
KEY
08402500
OFFER £475.00
Mechanical Coil Spring Compressor Workstation Universal piece of equipment for assembling UP TO 16 00KG OF & disassembling struts & coil springs FORCE • Standard workstation construction but with Heavy Duty Mechanical compression components in place of pneumatic parts • Allows for use where air supply is limited, restricted or unavailable i.e. mobile use • High power mechanical spindle allows for the application of up to 1600kg of compression force onto contained spring • Long main spindle achieves large 420mm of stroke – greater than our pneumatic workstations • Powered by easy access 19mm hex drive on top of tool direct onto main spindle and can be used with either hand tools or even impact air tools • Includes adjustable vice clamp as standard • Compatible with all other Sykes-Pickavant workstation standard jaws, brackets & accessories
£795.00
FOR USE WITH PRESS FRAME PRESSURE SCREW (18704100)
FOR USE WITH SP 12T HYDRAULIC RAM (18000000)
FOR USE WITH WORKSHOP PRESS See page 15
FOR USE WITH AIR TOOLS See page 8
3858’ RANGE UP TO 2452KG OF FORCE (AT 10 BAR)
385800SP
Pneumatic Coil Spring Compressor Workstation - Extra Heavy Duty Model c/w FREE Mercedes Bracket Set
Universal piece of equipment for assembling and disassembling struts and coil springs • Suitable for cars, 4WD’s and light commercials that use McPherson strut type suspension systems • Front and side spring clamps designed for fast changeover using unique Brackets System • Fitted with Extra Heavy Duty Pneumatic Cylinder - Compression force (at 10 bar) = 2452 kg • Ideal for Extra Heavy Duty applications i.e. SUV’s, 4WD’s etc where full spring OFFER £1595.00 compression is required SAVE £150.00 • Double-depth front plate for use on extra-long strut assemblies LIST PRICE £1745.00 • Safety locking valves system – locks safety cage and prevents usage with cage open
WORTH £239.95
FREE MERCEDES BRACKET SET (38480100)
UPPER BRACKET FOR MERCEDES A, B, C, E CLASS & LOWER BRACKET FOR MERCEDES E CLASS
WHEN YOU PURCHASE 385800SP Optional Accessories for use with Suspension Workstations 38480200
38480100 Mercedes Bracket Set A, B, C & E Class
Upper Jaw Set for High Compression Springs
£239.95 38480500 Special Bracket Mercedes C Class (2010-)
38480600 Special Bracket Nissan Qashqai
£97.95
£179.95
38580200 Jaw Holder
£42.95
NEW TO RANGE
• For use with 3858 and 3868 workstation brackets • Includes 3 x hanging hooks and 4 x slots for brackets • Provides a tidy and safe storage solution
38480400 Special Bracket Porsche Cayenne / VW Touareg
£99.95 38480700
Scan the QR code to watch a video of the suspension workstation range
Double Depth Strut Vice
£117.95
38580400
NEW TO RANGE
Coil Spring Clamp
• Tool to secure coil spring into lower bracket for use with the SP range of suspension workstations • Designed to hold the coil spring still during initial compression and restrict twisting through the bracket
MADE IN THE UK
MADE IN THE UK
£99.95
£49.95
COME & SEE US AT THE CV SHOW - NEC - 14-16 APRIL - STAND 4F31 18
Tel: 01543 679900 www.sykes-pickavant.com
DIESEL BLEEDING & FUEL INJECTION 31467500
MADE IN THE UK
Diesel Fuel System Bleeding Kit
Many modern diesel fuel systems are very difficult to self-bleed once the low pressure feed circuit has been opened to the atmosphere. The circuit may have been opened by removing the fuel filter or by a damaged feed pipe. The pump unit contained in the kit enables the user to generate suction by continually squeezing and releasing the hand pump to draw the air and fuel through the low pressure system. • Designed to allow the user to bleed / prime the low pressure feed side of the diesel fuel system • Contains common sized low pressure pipe sets including: - Standard 8mm, 10mm and newer 9.65mm (3/8 inch) - Renault small & large - Ford • Typical coverage includes: Citroën, Fiat, Ford, Land Rover, Peugeot, Renault, Volvo & Vauxhall • Supplied in tin Features • Clear pipes for visability of air bubbles • Colour coded pipes for easy identification • High grade reinforced pipes (rated over 10 bar) • Pump incorporates one way valve for ease of use - i.e. just one hand required
£199.95
Scan the QR code to watch a video of the Diesel Fuel System Bleeding Kit
Note: Pipes are sold as a paired set. Hand pump is sold with connecting pipes and 10mm convertor pipe
31467600 Ratchet Pump Kit
• Connects to 3/8” drive air ratchet to replace the hand pump section in 31467500 kit (above) to generate faster flow • Retaining bracket holds pump during use for one-hand operation • Easily engages with all 3/8” Dr. air ratchets • Supplied in plastic case
£99.95
Note: Suitable for diesel fuel systems only
31467000 Diesel Fuel System Bleeding Kit - Master Kit
• Master kit includes the Diesel Fuel System Bleeding Kit (as above) plus a low pressure fuel gauge (10bar), tee piece and ratchet pump • Gauge and tee piece enables the same pipes to be used for both bleeding and fuel pressure - providing a cost saving solution • The pipes and gauge can also be used on petrol engines where applicable • Ratchet pump provides a greater flow for when faster bleeding is required i.e on some Ford models • Supplied in foam in plastic case
£399.95 19
31485300 Comprehensive Schrader Valve Test Set
• Set of schrader type fuel port test adaptors which can be used with the fuel pressure gauge supplied in the Diesel Fuel System Bleeding Kit - Master Kit - above • Can be used to bleed air from the Schrader valve test port on specific vehicles - e.g. Saab • Schrader test ports are the preferred method of measuring fuel pressure on vehicles with fuel rails • Quicker and easier than breaking into fuel lines • Applications include: Alfa Romeo, BMW, Fiat, Ford, Jaguar, Land Rover, Mercedes, Mini, Saab, Vauxhall and Volvo
NEW £109.95
BRAKING 34300100 Automatic Brake Bleeder - 12v Now includes aluminium Euro cap - angled screw type
£584.95
OFFER £70.00 SAVE £29.95
LIST PRICE £99.95
Model specific caps also available - Ask for details
Speedyvac Brake Bleeder Kit
Air Assisted Caliper Piston Wind Back Tool Kit
• Air operated ram applies pressure to the caliper piston, while the handle is rotated by hand • Easy to use – works on standard workshop air supply • Reversible – works on both RH and LH applications • Can be used on Wind Back and Push Back pistons • Supplied with nine adaptors which cover a wide range of popular vehicles (applications list included) • Also supplied with 3/8” converter to use with adaptors from manual kit (03619200)
• Compatible with ABS systems • 12v powering with reverse polarity warning • Includes pump with automatic shut off valve • Regulator from 0 to 3Bar • 5L reservoir with visible level and min level indication • Auto power OFF when min level reached • 12V power cable with jack (L: 4m) • Fluid cable for brake fluid with quick coupling system (Length: 4m) • Includes fluid collection bottle & European screw-on reservoir cap • Stainless steel body • Professional pump and regulator fitted
03490000
03614000
NEW
ONE USER OPERATION
• New design one user operation brake bleeder features unique patented valve system to replace manual tap as used on previous models • Float valve shuts vacuum down when container reaches full to prevent dangerous brake fluid spray if capacity is accidently exceeded • Compact size (800ml capacity) allows for easy operation within wheel arch area • Internal shut off valve closes when not in use to prevent fluid spills when stored • Includes Autofiller unit (500ml capacity) with venting system providing unbroken continual fluid flow • Retaining clip provides clamping to all master cylinder reservoir types • Adjustable height positions on filler spout allows for correct fluid level during bleeding, preventing brake fluid reservoir running dry
£99.00
Brake Pipe Flaring Kits - 270 Series
Scan the QR code to watch a video of the ‘270’ Series Brake Pipe Flaring Tool
Brake flaring tool that produces both Convex and Double Lap flares to SAE & DIN standards • Metric & imperial pipe sizes • Unique ‘Dial-a-Size’ Turret design • Automatic punch extraction from flare • Variety of kits available to suit requirements
• From 3/16” to 1/2” / From 4.75mm to 12mm • Lever cam operation for quick flaring • Screw clamp for accurate die alignment • All components available individually Available Kits:
MADE IN THE UK
Part No.
List Price
Save Price
Offer Price
£185.00
£31.00
£154.00
SAE Single & Double Flares: 3/16”, 4.75, 6, 8, 10mm £239.00 DIN Single Flares: 4.75mm
£40.00
£199.00
£310.00
£55.00
£255.00
£215.00
£36.05
£178.95
Suitable for brake pipe sizes
02700100 SAE Single & Double Flares: 3/16” & 4.75mm
02700200
SAE Single & Double Flares: 02700800 3/16, 1/4, 5/16, 3/8, 1/2”, 4.75, 6, 8, 10, 12mm DIN Single Flares: 4.75mm 02700900
SAE Single & Double Flares: 3/16, 1/4” 4.75, 6mm DIN Single Flares: 4.75mm
20
Tel: 01543 679900 www.sykes-pickavant.com
ENGINE SERVICE
STAR BUY
08550300
£69.95 SAVE £20.00
GM Gearbox Bearing / Race Remover • For the removal of taper bearing cups from clutch housings in M32, MT 20-6 and MT 32-6 manual gearboxes widely used in GM, Saab and Fiat Group • Specifically designed to spread the load equally without danger of cracking the gearbox casing
MADE IN THE UK
07759700
NEW
NEW
07754600
Universal Timing Gear Holder
Universal Timing Gear Holder Kit
• Manufactured from high strength fibre reinforced nylon polymer • Single lever design enables quick and easy use • Provides breaker bar strength for maximum holding force OFFER £34.95 • Allows adjustment of cam SAVE £8.00 gear once installation is LIST PRICE £42.95 complete
• Timing belt service kit • Includes Universal Timing Gear Holder (left) and 4 x cam clamp pieces
OFFER £49.95 SAVE £30.00
LIST PRICE £79.95
OFFER £215.00
085900V2
SAVE £44.95
Vibro Impact Glow Plug Remover Kit
LIST PRICE £259.95
• For the safe, effective removal of 8, 9, 10, 11 & 12mm glow plugs • Uses controlled impact torque to create vibration in order to loosen seized glow plugs • The Vibro-Impact tool ‘loosens’ the seized glow plug, making it safe and easy to remove without the risk of Square Drive ¼” broken plugs, and / or damaged cylinder heads Max Torque - Right 40Nm • Includes 4 low-torque settings for controlled vibration Max Torque - Left 10 / 20 / 30 / 40Nm (10, 20, 30, 40Nm) Air Inlet ¼” • Supplied with special long-reach 8, 9, 10, 11 & 12mm Air Consumption 250 ltrs / min glow plug sockets, long and short extensions and Speed 12,000 per min universal joint for ease of access Air Supply
38360000 Universal Engine & Gearbox Support
• Designed to support the engine or gearbox when the engine mountings have been removed - e.g. When replacing timing / drive belts, water pumps etc • Designed for all makes of vehicle No need for costly model specific brackets • The unit is suspended from the chassis via the support hooks, the engine / gearbox is supported by the support pad and is counter-balanced against the underside of the vehicle by the support arms • Fully adjustable in all dimensions: - Extension: Min 630mm / Max 960mm - Support Plate Adjustment: 190mm
21
6.3bar / 90psi
OFFER £249.95
03810000
LIST PRICE £254.94
Adjustable Oil Filter Remover - 3 leg
SAVE £4.99
• Spider-type wrench, c/w geared legs which automatically tighten as the force is applied • Range: 62 to 93mm diameter • 3/8” sq. dr c/w with adaptor for 1/2 sq.dr. and / or 19mm hex
OFFER £19.95 SAVE £4.00
LIST PRICE £23.95
BEARING REMOVAL / INSTALLATION • The GEN 2 type of wheel bearing is predominantly fitted to models from Ford, Land Rover, Mazda, VW Group and Volvo • Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers • Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings
Ford 82mm Bearing
VW Group Bearing
Part No.
Size
08129500
72mm 78mm 82mm
08128000
78mm 82mm
08129000
62mm 66mm 72mm 85mm
081220V2
62mm 66mm 72mm 78mm 82mm 85mm
Applications
Price
72mm - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front) 78mm - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3 82mm - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70
£599.00
Essential Kit
Ford / Volvo / Land Rover / Mazda Combined Kit 78mm - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3 82mm - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70
£345.00
VW Group Kit 62mm - Audi A2, VW Lupo (Front) 66mm - Skoda Fabia, VW Fox (Front), Polo 72mm - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front) 85mm - VW Multivan, Touareg, Transporter (Front / Rear)
£645.00
All Sizes Master Kit 62mm - Audi A2, VW Lupo (Front) 66mm - Skoda Fabia, VW Fox (Front), Polo 72mm - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front) 78mm - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3 82mm - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70 85mm - VW Multivan, Touareg, Transporter (Front / Rear)
£845.00
NEW LOWER PRICES!
Combination Kits
Individual Kits Size
Applications
Price
08123500
62mm
Audi A2, VW Lupo (Front)
08124500
66mm
Skoda Fabia, VW Fox (Front), Polo
08125500
72mm
Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front)
08126500
78mm
Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3
08128500
82mm
Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70
08127500
85mm
VW Multivan, Touareg, Transporter (Front / Rear)
£175.00 £175.00 £199.00 £215.00 £225.00 £249.00
NEW LOWER PRICES!
Part No.
Note: Spare Parts are available for all kits. Please see our website / catalogue
22
NEW W FLUID SERVICE SYSTEMS E N 53403500
53401500
Fortron Injector Max Machine
Fortron Coolant Flush Machine
• Effective way of flushing and exchanging the complete cooling system fluid • Suitable for all types of coolants and vehicles • Includes a set of multi-application adaptor fittings • Air operated and portable
• Simple and effective method of cleaning both petrol and diesel fuel systems without the removal of injectors from the vehicle • Air operated
£1749.00 Includes comprehensive adaptor set
53401600 53403600
53403700
Injector Max Premix Solvent - Petrol
Injector Max Premix Solvent - Diesel
£17.99
£17.99 53403800 Injector Max Vactek Fluid Bottle
£11.49
53403900 Injector Max Induction Service Kit - Petrol
£11.49
£11.49
53404000 Injector Max Induction Service Kit - Diesel
£16.99
53402500 Fortron Automatic Transmission Fluid Flush Machine - Fully Auto
£1995.00
Coolant Flush Treatment Additive
53404500 Fortron Power Steering Flush Machine • Replaces 100% of steering fluid • Takes on average 10 minutes per service • Extends the service life of (often overlooked) system • Revitalises and conditions ‘o’ rings and seals • Portable, sturdy design • Includes Power Steering Flush Service Kit
• Can replace up to 100% of transmission fluid • Ability to specify exact amount of fluid to change • Fully automatic and user friendly safe • Includes comprehensive adaptor set and Flush Service Kit • Safely cleans up and extends the service life of automatic transmissions
53404600 Power Steering Flush Service Kit
• Includes bottle of Power Steering Flush and tube of Auto Trans & Power Steering Concentrate
£3495.00
£11.49
£995.00
53402600 ATF Flush Service Kit
• Includes bottle of Automatic Transmission Flush and tube of Auto Trans & Power Steering Concentrate
12 Packs are available for all Fortron Fluid Accessories. Ask your Distributor for details
£11.49 Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United Kingdom Tel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901 e-mail: sales@sykes-pickavant.com www.sykes-pickavant.com ALL PRICES QUOTED EXCLUDE VAT & ARE SUBJECT TO AVAILABILITY - E&OE - PRICES VALID UNTIL 30TH JUNE 2015 - REF: SPQ215GBP COPYRIGHT 2015 - SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED.
Distributor Stamp: