& SPECIAL OFFERS
NEW PRODUCTS SEPTEMBER - DECEMBER
2018
engine service & testing
for petrol & diesel engines
Seat, Skoda, Smart, Toyota and VW
lock - quick release connector, ensures adaptors cannot accidentally be left in the spark plug port • Positive Specially designed self-centering adaptors ensure minimal risk of cross threading when attempting to screw • the compression adaptor in to the spark plug port • Gauge Scale: 0 - 20bar, 0 - 190psi 31434900 UNIVERSAL COMMON RAIL INJECTOR SET £91.95 be used with diesel compression gauge (31420100) • ToEnables test to be achieved through injector port • Can alsocompression be connected to dummy glow plugs to extend the length for improved access • LAND ROVER TD5 COMPRESSION TESTER DIESEL COMPRESSION TEST KIT FOR The only tool available to fully test the COMMON RAIL DIESEL (CRD) ENGINES
compression of all 5 cylinders
31424700
£52.95 •
TD5 engines made between 1998 & 2005
www.sykes-pickavant.com
£289.95
a direct indication to the location of the leak by measuring the • Provides rate of loss of compression for individual cylinders to diagnose worn / broken piston rings, burnt / leaking valves and faulty head gaskets • Helps Includes a selection of glow plugs and an adjustable dummy injector • Supplied with M12 and M14 brass quick release spark plug adaptors • 31370500 PETROL ONLY CYLINDER LEAKAGE TESTER KIT £159.95 • As per kit above excluding glow plugs & dummy injector 31407500 PETROL ENGINE COMPRESSION TESTER - QUICK-RELEASE KIT designed for deep seated spark plug ports with long narrow threads, as found on many modern petrol • Specially engines £114.95 M12 and M14 spark plug adaptors - M12 spark plugs are now commonly being used by: Alfa Romeo, • Includes Audi, BMW, Citreon, Dacia, Fiat, Ford, Hyundai, Jaguar, Kia, Land Rover, Mercedes, Mini, Nissan, Peugeot, Renault,
use with existing Sykes-Pickavant compression test kits to • For measure cylinder compression on 5 cylinder diesel Land Rover
1
31370000
COMBINED PETROL & DIESEL CYLINDER LEAKAGE TESTER KIT
31427500 A new compression test kit, specifically designed to cover a wide range of modern CRD engines
£414.95
15 x Dummy Glow • Includes Plugs – specially designed
to cover a wide range of CRD applications
includes a Dummy • Also CRD Injector and Clamps to
allow for testing if it is more tool that fits in place of original high pressure fuel • Unique acceptable to remove the injector injector injector clamps hold adaptor tightly in place to create • Original with 83mm – 60bar • Supplied gas tight seal Pressure Gauge to BS1780 standard to fully test and diagnose TD5 engines; as these particular • Ideal engines only have 4 glow plugs, the compression of all 5 • Includes applications list cylinders cannot be fully tested through the glow plug option
COMMON RAIL DIESEL (CRD) FUEL RETURN FLOW KIT
MITYVAC SILVERLINE ELITE AUTOMOTIVE KIT MV8550 £129.95 £124.50 • Ideal for a wide variety of workshop tasks requiring SAVE: £75.45
•
31462000 Designed for use on the injector return side of a CRD system
LIST PRICE: £199.95
Vacuum and / or Pressure
convertor to switch from • Dual Vacuum to Pressure
to diagnose poor • Helps / no engine starting,
•
Kit Contents:
Die-Cast Aluminium • Silverline Vacuum and Pressure Pump to
poor engine running & acceleration / general lack of engine power Includes graduated acrylic measuring block for up to six cylinders, injector adaptor sets for Bosch / Delphi / Denso / Siemens, set of reduction pipes and hanging hook
01543 679900
4bar (60psi) pressure
Suitable for solenoid injectors only
large 480ml Fluid Reservoir • New with quick connection to pump of 12 vacuum caps • Selection Diagnostic / Brake Bleeding • Adaptor kit • Tubing and Tube Connectors
shaped high pressure connector pipes (x5) (M12 x 1.5 • Includes & M14 x 1.5 connections)
adaptor
M16 x 1mm adaptor for commonly fitted Bosch CP4 pumps
314660V2
(CRD) HIGH PRESSURE TEST SET £429.95 As per 314650V2 kit above excluding electronic sensor tester
• DIESEL FUEL SYSTEM BLEEDING KIT the user to bleed / prime the low pressure feed side of • Allows the diesel fuel system common sized low pressure pipe sets including: • Contains - Standard 8mm, 10mm and newer 9.65mm (3/8 inch) - Renault small & large
- Ford
coverage includes: Citroën, Fiat, Ford, Land Rover, • Typical Peugeot, Renault, Volvo & Vauxhall • Clear pipes for visibility of air bubbles OIL PRESSURE TEST KIT
31467500 SAVE: £50.00
£149.95 LIST PRICE: £199.95
£189.95
31470000
to diagnose • Helps worn oil pumps, faulty
New adaptor also available separately as P.N 31466100
PREMIER LOW PRESSURE FUEL TEST KIT 31469000 A comprehensive high quality OEM standard low pressure diesel and petrol pressure kit Includes:
oil pressure switches and pressure warning indicators
scale gauge: 0 • Dual 10bar, 0 - 150psi • 1m long flexible hose profile, quick • Small coupling adaptors with built-in shut-off valve
x oil switch port • 11adaptors in plastic case • Supplied with foam insert
new adaptor
M12 x 1.75mm thread to suit engines commonly found on newer GM, Vauxhall & Opel models New adaptor also available separately as P.N 31472200
protected, fuel • Shock resistant dual scale gauge to 10 bar / 145psi
valve for safe • Relief de-pressurisation gauge assembly • Vacuum Fuel tap and T-connector • assembly adaptors • Quick-coupling and connectors with
•
reinforced hoses and brass fittings
£459.95
4 x Schrader valve connectors
Latest fittings for Jaguar Land Rover variant engines, supplied with easy to follow fitting / application instructions Applications include: Alfa, Audi, BMW, Chrysler, Citroen, Ferrari, Fiat, Ford, GM, Jaguar, Land Rover, Mercedes, Mini, Peugeot, Renault, VW and Volvo
FUEL INJECTION PRESSURE TEST KIT Updated kit now covers Alfa Romeo, Fiat, Lancia and new Ford Ka vehicles FOR PETROL ENGINE VEHICLES 314875V2
£344.95 Injection Pressure Test Kit for modern • Universal Electronic, Multi-point injection systems protected, fuel resistant dual scale gauge – to 10bar / 145psi • Shock valve for safe depressurisation • Relief Quick coupling adaptors and connectors • Wide applications range: • - S type, 8mm plastic push-in fittings, as used on Alfa, Audi, Citroën, Fiat, Ford, GM, Peugeot, VW etc.
- Schrader type valve test port adaptors (7/16 & 8mm) as used on Alfa, BMW, Chrysler, Ferrari, Fiat, Ford, GM, Mercedes, Mini, Volvo etc. - Specialist Renault fittings for use on Renault 1.2 / 1.4 / 1.6 Petrol Engines - Clio, Twingo, Kangoo, Extra, Megane, Scenic etc.
• Supplied in plastic case with foam insert
Optional fittings available to suit older vehicles
SALES@sykes-pickavant.com
allowing comparison to a code readers displayed data
engine service & testing
314650V2
COMMON RAIL DIESEL (CRD) HIGH PRESSURE TEST KIT unique pressure limiting valve in-built to prevent • Includes extreme pressures building in test kit during engine cranking £579.95 delivery pressure output from the CRD (Common Rail • Measures Diesel) High Pressure pump under engine cranking conditions test to show a “healthy” 250+ Bar output, gauge • Cranking reads up to 600 Bar sensor tester reads and displays the high pressure • Electronic new signal from the actual high pressure sensor output point –
2
wheel bearing
EVOLUTION OF SYKES-PICKAVANT WHEEL BEARING kits UNIVERSAL WHEEL BEARING KIT 08145000
NEW
FOR 34MM - 85MM GEN 1 BEARINGS
generation 1
Complete set for mounting and dismounting wheel bearings and for assembling hubs
large number of pressure bushes and centering washers in this • The kit makes it ideal for a wide range of applications upon cars, vans and
Bearing Removal
transporters
safety and accuracy at all stages of the working operation • Guarantees Also ideal for use with a press machine; suitable for wheel bearings, silent • bearings, bushes, washers, hubs etc. special design of the components provides installation without • The damage is placed on the outside of the bearing ring for bearing • Pressure installation and the inside for hub installation
£649.00 INNER RACE BEARING REPLACEMENT KIT
08134300
£649.00 •
Bearing Installation
Hub Installation
Universal tool set for the replacement of inner bearings
NEW
Puller features a unique gripping principle that can also be used on flush bearing inner rings that remain on the wheel hub during replacement of the wheel bearing
clamping with the clamping bell, the special cutting • When profile of the clamping sleeves penetrates even the smallest
working gaps resulting from the production process, ensuring removal without slippage
Ram not supplied but will accept 150000V2 & 180000V2
bearing ring is fully gripped and removed without tilting • The Also works in places where the ABS pulse wheel is firmly • attached to the wheel hub (e.g. VW Golf) with 5 grippers suitable for the removal of bearings • Supplied with a diameter of 35 to 61mm VW, Audi, BMW, Ford, Fiat, Mercedes, Opel, • Applications: Renault, Peugeot & Volvo
QUICK AND EASY EXTRACTION
www.sykes-pickavant.com
generation 2
3
GEN 2 BEARING ALL SIZES MASTER KIT 081220V2 Individual Kits also available - Please contact Sykes-Pickavant for further information
generation 2.5 GEN 2.5 WHEEL BEARING KIT
08135500
SAVE: £100.00
£795.00 LIST PRICE: £895.00
SAVE: £30.00
£269.95 LIST PRICE: £299.95
• 62 / 66 / 72 / 78 / 82 / 85mm sizes:
ON VEHICLE SOLUTION
Designed to remove the hub and bearing from aluminium multi-link suspension units with the aid of a pressure screw, adjustable legs and top plate to accommodate the different size bearings as found on VW group vehicles
Audi A2, VW Lupo (Front) procedure is currently carried out with repeated heavy blows using • 62mm: • This a hammer to remove the heavily corroded bearing which can easily 66mm: Skoda Fabia, VW Fox (Front), Polo • 72mm: Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW damage surrounding components such as steering knuckles and ball • Polo (Front), VW Fox with PAS (Front) joints or fracture the aluminium wishbone Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3 • 78mm: 82mm: Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, • V70, XC60, XC70 • 85mm: VW Multivan, Touareg, Transporter (Front / Rear) Applications: Audi - A4 00- / A5 07- / A6 97- / A7 10- / A8 94- / Q5 08- / R8 07Seat - Exeo 08- VW - Passat 03-
Bearing Reference: FAG - 5745, 5726, 5739, 5478, 5744 SKF - VKBA 6557, VKBA 3536, VKBA 6547, VKBA 6546, VKBA 6649 SNR-NTN - R157.45, R157.26, R157.40, R154.57, R157.43
01543 679900
53403500
INJECTOR MAX FLUIDS
534036-12
PETROL PREMIX SOLVENT
12PC
CHECK OUT THE VIDEO HERE SAVE: £36.98
£184.90 LIST PRICE: £221.88
£2149.00 BUY 10 GET 2 FREE! to Go’ treatment for petrol engines • ‘Ready Also available individually - p.n. 53403600 •
534037-12
DIESEL PREMIX SOLVENT
12PC
SAVE: £36.98
£184.90 LIST PRICE: £221.88
BUY 10 GET 2 FREE! to Go’ treatment for diesel engines • ‘Ready Also available individually - p.n. 53403700 •
FOR VEHICLES SUFFERING WITH LACK OF POWER, ROUGH IDLE OR POOR FUEL ECONOMY
DIESEL INTAKE & EGR CLEANER
The Fortron Injector Max Machine provides a simple and effective method of cleaning both petrol and diesel fuel systems without the removal of injectors from the vehicle
12PC £239.40
on to oily / carbon deposits; stripping away • Locks surface build up, suitable for all vehicles including
Cleans the complete fluid systems without disturbing / removing any key components
those with DPFs
• Also available individually - p.n. 53404700
• Includes comprehensive adaptor set • Operates using compressed air Functional - Cleans fuel injectors, • Multi fuel lines, fuel pumps, combustion
VACTEK COMBUSTION AREA CLEANER 534042-06
6PC
£107.70
formula, • Concentrated based on detergents
chambers and throttle body systems
all deposits from the fuel • Removes system without damaging the engine,
and solvent cleaning agents designed to clean combustion chambers, piston rings and valves
fuel pump and fuel lines
technology Injector Max system • New cleaning fluids are suitable for all
available individually • Also p.n. 53404200
vehicles including the latest style common rail diesel engines - Made in Britain to be compatible with European fuels and recognised bio-diesels
REGEN - DPF CLEANER
BUY 5 GET 1 FREE! 534041-06
Benefits Include:
• • Improved Power • Lower Emissions • Smoother Performance
534047-12
6PC
SAVE: £27.95
£139.75 LIST PRICE: £167.70
Improved MPG
FIND OUT ABOUT FURTHER POS OPTIONS HERE
Formulated to kick-start the forced regeneration of the DPF, clearing soot deposits and cleaning without disassembly
SALES@sykes-pickavant.com
•
workshop equipment
fortron injector max
4
cooling
315 SERIES COOLING SYSTEM PRESSURE TEST KIT 331595V3 Provides an effective solution when pressure testing the cooling system to help locate internal & external leaks
SAVE: £46.00
Includes:
£279.95
LIST PRICE: £325.95 • pump with pressure gauge & quick-release fitting • Hand Hose assembly c/w quick-release fitting • 16 x Threaded cap adaptors • 3 x Bayonet Fitting cap adaptors • 1 x Cap Adaptor wrench • Vauxhall: Adam, Astra J, Cascade, Corsa E, Meriva B, Mokka & Zafira Tourer C Updated kit now includes caps to cover the latest applications for Vauxhall / Saab and BMW / Mini vehicles
Saab: 9-5 2010BMW 4.4/4.8/6.0 engines: 5 Series (F07/10/11) 2010- / 6 Series (F06/F12/13) 2011- 7 Series (F01/02/03) 2009- / X5 (E70) 2008- / X6 (E71/E72) 2008- and BMW i3 2013-
SUITABLE FOR MODERN VEHICLES WITH an IN-BUILT OVERFLOW AT THE TOP OF the EXPANSION TANK Note: Full application details can be found on our website: www.sykes-pickavant.com
Mini models: F54, F55, F56, F57, R50, R52, R53, R56, R57, R58, R59 & R60
33159700
COOLING CAP SETS
33159800
Note: Full application details can be found on our website: www.sykes-pickavant.com
£52.95
£83.95
To update 331595V2 Kit
To update 33159500 Kit
of 2 additional cap adaptors to update 331595V2 - ‘315’ Series • Set • Cooling System Test Kit to provide extra coverage • Applications include: BMW, Chevrolet, Mercedes, Mini, Saab & Vauxhall • Applications include: BMW, Chevrolet, Mercedes, Mini, Saab & Vauxhall REACTION FLUID COMBUSTION LEAKAGE TESTER BUY 5 GET 1 FREE! Set of 5 additional cap adaptors to update original 33159500 - ‘315’ Series Cooling System Test Kit to provide extra coverage
33195000
www.sykes-pickavant.com
Fast and accurate diagnosis of cylinder head gasket leaks
5
for use with both • Suitable petrol & diesel engines with standard and • Supplied sensitive reaction test fluid
SAVE: £5.25
£26.25
£69.95
LIST PRICE: £31.50
250ml replacement bottles of Combustion Reaction Fluid for use with any Combustion Leakage Testers
(100ml)
connector for use • Quick with: Sykes-Pickavant 315 / 316 / 317 Series Cap Adaptors
STANDARD
XL COOLING SYSTEM PRESSURE TEST KIT 331400V2 Applications Include: Bova, Case, Caterpillar, County, DAF, Dart, David Brown, Denis, Deutz-Fahr, ERF, Fendt, Ford, Iveco, JCB, John Deere, Komatsu, Leyland Marshall, MAN, Massey Ferguson, Mercedes-Benz, Neoplan, New Holland, Optare, Renault, Scania, Volvo construction and agricultural vehicles Includes:
bodied hand pump with pressure dual • Metal gauge & quick-release fitting Assembly c/w quick-release fitting • Hose 10 x Reservoir & Radiator pressure caps •
01543 679900
331942SP
6PC SENSITIVE 6PC 331944SP
XL COMBUSTION LEAKAGE TESTER 33145000 Fast and accurate diagnosis of cylinder head gasket leaks
for use with both petrol & diesel • Suitable engines with standard and sensitive reaction • Supplied test fluid (100ml) connector for use with 33140000 and • Quick 331400V2 cap adaptors
£299.95
£89.95
strong, • Five flexible plastic
11PC. NON MARKING TRIM TOOL SET 04551000
angled, lever and panel pullers
roof linings, • For door and panel
trims and moulding strips
trim panels without damage
9PC. HOOK, PICK & SCRAPER SET
set of strong, flexible plastic angled, • Professional lever and panel pullers £19.95 • Reduces risk of damaging / scratching surfaces 04605000 5PC. TRIM CLIP LIFTER SET
66088700
£89.95
£29.95
• Hardened chrome
grade spring steel • High For removal of plastic • clips, fasteners,
vanadium steel
soft grip handles • Ergonomic Includes multi-purpose scraper, • ideal for gasket scraping of 9 hooks, picks and scraper, • Set ideal for the fitting and removal of:
upholstery and door trim panels
in box with • Supplied foam
Contents:
hooks & picks •• 44 xx standard mini hooks & picks • 1 x straight edge scraper
- O rings - Seals - Bushes - Springs - Cotter Pins - Fuses etc.
• Supplied in moulded storage tray UNIVERSAL EXTENDERS
Contents: 1 x Clip Lifter, 1 x 7mm Clip Lifter, 1 x 5mm Half-Round Clip Lifter, 1 x 11mm S Form Clip Lifter, 1 x 11mm Angled Clip Lifter
•
NEW
3PC. XL TRIM CLIP LIFTER SET 04623000
MULTIPLE USES
additional leverage • Provides in a secure manner for use with spanners, • Ideal allen keys etc. tight connections on • Loosens hard to reach areas
PART NO.
LENGTH
PRICE
68786000
340mm
£35.95
68795000
580mm
£99.95
£79.00
designed for many types of plastic fasteners including clips, • Specially upholstery and door panels sizes, shapes and lengths to tackle a variety of applications • Different Thin wedged tip for easy access • Supplied in box with foam • Contents: x 5mm Clip Lifter, 245 x 11mm S-Shape Clip Lifter, 370 x 11mm • 250 S-Shape Clip Lifter
quality, heavy duty MECHANICS VICE - FIXED BASE • High construction provides years of
GUARANTEED Unbreakable* *Excluding jaws & handle
trouble free use
machined components for • CNC excellent fit and durability and tempered finely • Hardened ground jaws for superior grip resistant hammered blue • Scratch finish parts available • Replacement including jaws and handle
SWIVEL BASE FOR MECHANICS VICE 360° • Allows rotation of
Mechanics Vice for better access
to most • Lockable convenient angle
PART NO.
SIZE (INCH)
JAW WIDTH (MM)
JAW OPENING (MM)
THROAT DEPTH (MM)
PRICE
PART NO.
COMPATIBLE VICE
53320400
4”
102
132
74
£59.95
533204-B
53320400
£9.55
53320600
6”
153
206
95
£99.95
533206-B
53320600
£15.84
53320800
8”
203
225
105
£139.95
533208-B
53320800
£18.25
PRICE
SALES@sykes-pickavant.com
£11.95
the safe • Enables removal of vehicle
workshop tools
04550000
5PC. TRIM TOOL SET
6
battery care
ULTRACAPACITOR/LITHIUM BATTERY BOOSTER
NEW
ACCU-SMART BATTERY CHARGER RANGE ®
£395.00
341300SP
Extend your batteries’ lifetime with Accu-Smart® a totally automatic charger that works for you
for Wet (Lead Acid), AGM, • Suitable Gel & Fleece type batteries Runaway Technology • Thermal optimizes the charging time without the risk of overheating, analyses and protects the battery during charge
memory settings within the • Retains vehicle whilst replacing the battery Accu-Smart® charger restarts • The in case of a power cut and provides
• Quick Recharge: hybrid technology allows booster • toEasybe &charged from the vehicle’s battery or if highly 12v 1300 amp lightweight, compact & powerful Ultracapacitor Booster Pack with backup lithium battery
discharged the backup lithium battery can be used instead, this takes 1 - 4 minutes depending on method used
• Operating Temperature Range: -40°C +65°C • Override Mode to start engine without any battery • mounted Mode for cold start of diesel engine • Glow Protection against short-circuits and reverse polarity • Digital display shows capacitor charging level and • vehicle’s battery voltage case with lifetime warranty • Rotomolded Fully insulated Heavy-Duty curved clamps • 10,000 Cycles / 10 Year Life Span
total protection against shortcircuits, peaks of voltage (AC or DC), inversion of polarity and overheating spikes
automatically, without • Works external intervention with no need for handling or mode selection
03202500
PRICE
12V 2A
£42.95
896124SP
12V 4A
£52.95
896127SP
12V 7A
£72.95
8961210SP
12V 10A
£82.95
£309.00
6V-12V batteries and • Tests 12V-24V volt charging & starting systems range: 40-2000 CCA • Operating connection warning • Bad Includes digital screen with integrated printer • Tests EFB, VRLA / GEL, AGM Flat Plate, AGM Spiral • and regular liquid batteries • Rating system: SAE (CCA) / DIN / EN / IEC & JIS
Eliminate the risk and frustration of an uncharged booster pack!
shell case design with 5mm shatter-proof polyethylene • Robust Long & flexible cables with double insulation • Robust, wide-opening clamps include copper trace carrying the current • to the bronze jaws & protecting the spring against over-heating
mains AC charger for workshop / showroom use
www.sykes-pickavant.com
RATING
STOP / START BATTERY & ELECTRICAL SYSTEM ANALYSER
PROPULSTATION BOOSTER PACK WITH DOCKING STATION Model • AC Supplied with
7
PART NO. 896122SP
Model • DC Supplied with 5m cable and
one-way diode for connection to vehicle electrics (Ideal for recovery vehicles)
PART NO.
DESCRIPTION
VOLTAGE
CRANKING AMPS
PEAK AMPS
PRICE
521001AC
Propulstation
12V AC
700
1860
£515.00
521001DC
Propulstation
12V DC
700
1860
£475.00
521002AC
Propulstation
12V AC
800
2370
£615.00
521002DC
Propulstation
12V DC
800
2370
£575.00
800 Booster Pack with Free 12v 4 Amp Accu-Smart Battery SYKES-PICKAVANT EXCLUSIVE 861002SP1 Pro-Start Charger INCLUDES FREE ACCU-SMART WORTH £52.95 Pro-Start 800 Booster Pack with 800 cranking amps and 2370 peak OFFER • 12v amps INCLUDES LIFETIME CASE WARRANTY & 2 YEAR BATTERY WARRANTY internal batteries • AGM Double insulated starting cables – 1.30/1.35 mtrs length £385.00 •• Illuminated voltmeter indicates booster charge level, booster and alternator function jaw clamps, fully insulated • Curved Single-piece, shock resistant, moulded case • Includes free 896124SP - Accu-Smart 12v 4 Amps Battery Charger
+
STANDARD RANGE
All units include lifetime case warranty & 2 year battery warranty
PART NO.
DESCRIPTION
VOLTAGE
CRANKING AMPS
PEAK AMPS
PRICE
861041SP
SOS Booster 440
12V
440
1600
£199.00
861001SP
Pro-Start 700
12V
700
1860
£310.00
761001SP
Pro-Start Plus 1400
12/24V
1400 / 700
3720 / 1860
£725.00
761006SP
Pro-Start Plus 1600
12/24V
1600 / 800
4740 / 2370
£975.00
01543 679900
Pro-Start booster packs are perfectly safe for the on-board electronics on modern vehicles and are compatible with Petrol, Diesel & Hybrid vehicles
insulated starting cables – 1.30 / 1.35 mtrs length • Double Illuminated voltmeter indicates booster charge level, booster & alternator • function jaw clamps, fully insulated – blue clamp with LED lamp • Curved Shock resistant, moulded case – (lifetime case warranty) • “All Pro-Start booster packs include a mains 240V smart charger to maintain peak battery condition for long life & maximum performance”
350820SP
£3295.00 • Cross-Contamination - cleans the circuit with just 1 litre of oil and • Zero prevents cross-contamination between different ATF oils Recirculation Function - prevents any over-pressure related • Automatic damage ATF Temperature Measurement - allows for flushing to start • Automatic automatically when oil conditions are ideal • Automatic Flow Direction - provided by the pressure sensors • Pumps Flow-Rate Control - adapts the flushing speed to the transmission characteristics • Fully Automatic Operation - via in-built updatable vehicle database Database - provides complete instructions for ATF flushing operation; oil • Instructional grade, capacity, service points, connections & adaptor information • Twin Pump Machine - for faster flushing control even on tricky transmissions • Dedicated New Oil Tanks - can easily be interchanged with quick change coupler Function Feature and Probe - allows oil changing via dipstick tubes where service • Dipstick can only be done through the oil refill hole as well as power steering fluid change Function - speeds up used ATF discharge in case of transmission equipped with low • Boost flow-rate pump • Printer and Additive Cannister - provided as standard Automatic Operation - via control panel with large LCD colour screen
REQUIRES ADAPTOR KIT
35083100
35083000
Applications Include: Volvo, PSA Group, Renault, Jeep, Mitsubishi, GM, Suzuki, Toyota, Saab, Mercedes, Ssangyong, Audi, VW, BMW, Jaguar, Nissan, Daihatsu, Suzuki, Fiat, Lancia, Ford, Porsche, Alfa Romeo, Cadillac, Land Rover, Chrysler*
ADAPTOR KIT 2
ADAPTOR KIT 1
£650.00
£595.00 Applications Include: GM, Fiat, Ford, Jeep, Chrysler, Saab, Mercedes, BMW, Jaguar, Volvo, Land Rover, VW, Rover, Opel, Alfa Romeo*
adaptors also available separately See website for options
*Model restrictions apply, see website for full application list
best selling
‘SILVER SERIES’ HYDRAULIC WORKSHOP PRESSES
models
AVAILABLE IN 4 RATINGS: 15T, 20T, 30T & 50T PART NO.
RATING
HEIGHT (MM)
WIDTH (MM)
DEPTH (MM)
BED DEPTH (MM)
RANGE
WEIGHT (KG)
PRICE £679.00
53436000
15T
1930
920
650
170
85 - 950
150
53436200
20T
2030
940
650
180
65 - 1030
165
£799.00
53436400
30T
2060
1120
650
200
115 - 1020
230
£1150.00
53436500
50T
2290
1220
650
210
70 - 1065
370
£1899.00
Range of Hydraulic Workshop Presses equipped with a two-speed manual pump, overload safety valve, automatic arm return system & V blocks
• Heavy duty steel frame • Automatic arm return • Manufactured in the EU • Two speed pump • Pressure gauge
• Piston over-travel limit stop • Overload safety valve • V blocks • Winch for table*
*For models 53436400 & 53436500
N.B. For deliveries made outside UK Mainland, an additional carriage charge will apply / Other sizes of press are available - Contact Customer Services or visit www.sykes-pickavant.com for details
60 - 100 tonne hand operated & electro-hydraulic presses are also available - see website for details
SALES@sykes-pickavant.com
Standard model also available - part number 35081000
workshop equipment
& built in new PRINTER database INCLUDED
premium atf machine
8
bush removal
Universal Press & Pull Sleeve Kit - Car / LCV 08780000
buy the best! SAVE: £10.00
£389.00 LIST PRICE: £399.00
A universal system for the removal and installation of Suspension Bushes, Bearings, Seals etc.
selecting the appropriate diameter sleeves, the bush / bearing / seal is ‘Pressed’, or • By ‘Pulled’ by the action of turning the spindle nuts in opposing directions universal applications for Cars, LCVs HGVs etc., with a range of kit options to suit • Fully individual requirements • Contains 20 x Press Sleeves in 2mm diameter steps • Inside Diameter Range: 34 - 72mm UNIQUE PATENTED • Outside Diameter Range: 44 - 82mm STACKING DESIGN • 4 x Step Plates / 4 x Pulling Spindles with thrust bearings Larger void, due to stacking press • Supplied in moulded storage case sleeves, allows for work to be completed on larger components
compatible with 18780500 & 187000V2 below www.sykes-pickavant.com
Can also be used as a stand alone set of tools, with a standard workshop press, with selected model specific Press Piece sets and in conjunction with optional hydraulic upgrade kits. All components are available individually as spare parts.
9
UNIVERSAL C-CLAMP SAVE: £40.00
£239.95 LIST PRICE: £279.95
18780500 For the dismantling / installation of suspension components on the vehicle
• Jaw opening: 245mm • Throat depth: 100mm adaptors for • Includes use with the 08780000
UNIVERSAL PRESS FRAME SAVE: £10.00
£299.95 LIST PRICE: £309.95
187000V2 • • •
and XS Sleeve kits
to allow • Designed greater access in
restricted situations and where the universal press frame is not suitable
‘trapezoidal’ • Special threaded screw, allows for the application of greater force
cup works with gold and silver rings from • Base the SP press frame opposite impact screw which can be removed • Includes and replaced with a hydraulic ram (1500 & 1800 Series)
Can be used with an impact gun
01543 679900
• • •
Updated unit now provides greater power Allows easier operation - 50% more capable using the SP 12 tonne Hydraulic Ram Includes adaptor ring for use with 08780000 Universal Press & Pull Sleeve Kit (above) Can be used on its own as a stand alone tool or with Universal Press & Pull Sleeve Kits Open frame design 200mm of clearance through the press frame Ideal for use with individual model specific press piece sets
comes with 12 tonne hydraulic ram Also available without hydraulic ram: 18700100
08790000 For use as an add-on to the Standard Press & Pull Sleeve Kit opposite (08780000)
• Allows access to a wider range of vehicles, particularly SUVs and LCVs x Press Sleeves in 2mm diameter steps • 8- Inside Diameter Range: 82 - 88mm and 98 - 104mm
Contents:
- Outside Diameter Range: 92 - 98mm and 108 - 114mm
• 2 x 20mm Pulling Spindle Adaptors with Thrust Bearings M20 • Supplied in moulded storage case • PRESS & PULL SLEEVE KIT 4 x Step Plate Discs
08795000
£715.00 upgrade option Universal tool set for extracting and drawing in bushes, bearings, seals etc.
the 08790000 (above) to the 08797500 (below) • ToFullyupgrade universal applications – Car – LCV – HGV • Contains 12 x Press Sleeves • Inside diameter range: 74 – 112mm • Outside diameter range: 84 –122mm £495.00 • 4 x pulling spindles with thrust bearings • TO UPGRADE THE 08790000 TO 08797500*
bush removal
XL BASIC UNIVERSAL PRESS & PULL SLEEVE KIT
*Cannot be used as a standalone kit
UNIVERSAL PRESS & PULL SLEEVE SET - COMMERCIAL VEHICLE KIT For the Removal and Installation of Bushes, Bearings, Seals etc.
£1145.00
• Complete kit for SUV / LCV / PSV / HGV • Includes 20 x Press Sleeves in 2mm diameter steps • Inside diameter: 74 - 112mm in 2mm steps • Outside diameter: 84 - 122mm in 2mm steps • 4 x Pulling Spindles with Nuts & Thrust Bearings - M10 / M12 / M14 / M16 • 2 x 20mm Heavy Duty Pulling Spindle Adaptors with Thrust Bearings - M20 • 4 x Step Plate Discs
upgrade option
HYDRAULIC UPGRADE KITS FOR UNIVERSAL PRESS & PULL SLEEVE KITS 18782500 HYDRAULIC UPGRADE KIT (878 SERIES)
£299.95
18792500
£399.95
HYDRAULIC UPGRADE KIT (879 SERIES)
used in conjunction with • When components from 08780000 or
08797500, these kits allow application of up to 12 tons of hydraulic force which can be used to provide a controlled force in place of the manual or mechanical effort required when using 08780000 / 08797500
Hollow Ram Hydraulic • Contents: Cylinder, Alignment washer and 2x extra-
CYLINDER: 8MM STROKE CYLINDER: 40MM STROKE
HAND OPERATED HYDRAULIC PUMP 20017000
£469.95
long heavy-duty spindles that are rated for use with the hydraulic ram (Note: Standard 08780000 spindles are not rated for use with the 18782500 and / or 18792500 hydraulic ram)
two speed operation - high flow for low resistance and low • Automatic flow for high resistance & lightweight aluminium bodied hydraulic pumps fitted with • Portable gauge, hydraulic heavy duty hose and ¾” hydraulic coupler Rating: 10,000 psi / 700 bar • Pressure Designed for use with single acting cylinders • Automatic overload relief valve protects hydraulic components • Supplied in steel storage case •
20017170
HAND OPERATED HYDRAULIC PUMP WITHOUT STEEL STORAGE CASE
£429.95
SALES@sykes-pickavant.com
08797500
10
Innovative tools
buy the best!
INDUCTION HEATER + 96040000
Generates ‘Invisible Heat’ to release corroded and thread locked metal components without the danger of an open flame
• Angled design with trigger • Coil Twist Lock™ KIT CONTENTS • LED usage indicator • Fault override delay • User controlled LED light switch • Fan operation enhancements • Inline Connectors • ABS Sensors • Metal Fabrication Brake Bleeder Nuts • • O2 / DPF Sensors • Exhaust System • Truck Bed Bolts • Heat Treating • Body Panel Dents Applications Include:
SP INDUCTION HEATER - COIL KIT 96015000
£109.95
8x • Contains popular sizes of
• • •
1 x Coil 1 x String 1x Bearing Buddy
£595.00
• Tie Rod / Ball Joint Ends • Suspension Components • Steering Components • U-Bolts
INDUCTION HEATER COILS - 3 PC. 96013000
3x • Contains popular sizes of
32mm, 38mm, 45mm
21mm, • 19mm, 26mm
interchangeable coils
NEW
deep Magnetic Bowls 7710BLUE 7710GREY 7710GREEN
www.sykes-pickavant.com
£49.95
interchangeable coils
19mm x • 15mm, 2, 22mm, 26mm,
11
NTY WARRA R A E Y TWO
£11.50 7710ORANGE
magnet will attach securely to toolboxes, vehicle • Strong bodywork and any other metal object in your garage or workshop • Unique shape allows it to be positioned vertically or horizontally • Magnet keeps metal tools and components secured at any angle • Textured PVC magnet covering prevents surface scratching • Strong plastic construction x 135mm (overall height) / 113mm (maximum inner • Ø152mm depth)
01543 679900
90201000-GREEN
90201000-ORANGE
NEW £219.00 3-
ep st
power co
n
l tro
• vanes for extra power and single switch can be • 7easily changed for forward or reverse operation 1600nm reverse Easily adjustable torque regulator • Can be configured for right and left hand use 1084nm forward • Features 3-step power control and a lightweight magnesium composite housing • Available in Signal Green or Neon Orange Twin-hammer Variable speed trigger One handed operation • • • • High quality impact wrench with smart design and ergonomic handle
air tools
1/2” Impact wrench - Signal green / orange
IMPACT WRENCHES
PART NO.
DRIVE
90202500
MAX TORQUE NM (REVERSE)
TORQUE NM (FWD)
NOISE (DBA)
90201300
AIR CONSUMPTION (L / MIN)
WEIGHT (KG)
90201000
PRICE
90203500
1/4”
90
90
98.2
105
0.9
£149.00
90202500
3/8”
680
500
93.5
130
1.08
£209.00
90201300 (Ultra-Short)
1/2”
680
500
95
134
1.3
£189.00
90201000
1/2”
1600
1084
94.2
135
1.8
£219.00
90202000
3/4”
2600
2000
97
210
3.2
£525.00
®
to disassemble conical seat • Helps connections, wheel bearings, bushes, rusted screw connections etc.
CHISEL INSERT
90206000
®
The Heavy Duty Vibro-Impact® Air Hammer is for applications including loosening tight connections on vehicles such as HGVs, agricultural and construction vehicles
902450SP SUPPLIED WITH 90245100
design and ergonomically designed handle • Smart Single-switch can be changed for easy forward or • reverse operation adjustable torque regulator • Easily Can be configured for right and left handed use • Lightweight composite housing • 3 step powermagnesium control •
NEW VIBRO-IMPACT AIR HAMMER
HEAVY DUTY VIBRO-IMPACT AIR HAMMER
See website for additional inserts
90202000
902455SP SUPPLIED WITH 90245500 HAMMER INSERT
£745.00
£699.00
A unique concept to aid the removal of seized suspension parts
application of • Controlled force via an air powered impact hammer
the operator to • Allows control and gradually
increase the force being applied
SAVE: £20.00
in shock absorber • Built Low vibration for user comfort •
£319.00 LIST PRICE: £339.00
design special offer • Compact PVC hose • 180 degree pivoting wall bracket • Polypropylene case • Brass swivel assembly • 53399600 - Suitable for • compressed air up to 10 bar
RETRACTABLE HOSE REELS air/water
driven retractable hose reel • Spring c/w wall mounting brackets case • Polypropylene Suitable for compressed air or cold • water up to 17 bar working pressure duty rubber air / water hose • Heavy to ISO EN 2398 standard
working pressure
- Suitable for • 53399700 compressed air up to 20 bar working pressure
air only
PART NO.
SIZE
CONNECTION
LIST PRICE
OFFER PRICE
PART NO.
SIZE
CONNECTION
LIST PRICE
53399000
20m x 10mm
3/8”
£279.95
£199.95
53399600
9m x 8mm
1/4”
£105.95
OFFER PRICE £74.95
53399100
18m x 12mm
1/2”
£279.95
£199.95
53399700
15m x 10mm
1/4”
£105.95
£89.95
SALES@sykes-pickavant.com
90203500
12
SUSPENSION WORKSTATIONS
HEAVY DUTY PNEUMATIC COIL SPRING COMPRESSOR WORKSTATION special offer MARKET LEADING MODEL 385800SP
£1795.00 LIST PRICE: £1895.00
Universal piece of equipment for assembling and disassembling struts and coil springs on cars, 4WDs and LCVs
• Safety switch prevents operation when gates are open • Adjustable strut vice with 4 x setting options • Interchangeable jaws / vice to suit different springs • Unique double depth front plate • Length of travel: 330mm INCLUDES • Up to 2452kg of force (at 10 bar) ADDITIONAL arms & jaws adjust and lock to secure spring FREE ADAPTOR • Top ADAPTORS Automatic jaw levelling AVAILABLE HERE • BRACKET SET • 4 x floor mounting holes (38780100) • Includes 2 x standard brackets: 78-130mm and 105-182mm
2452kg compression rating required compression rating by application Up to 1200kg Picanto, Venga, Rio
SEAT
Ibiza, Mii
LEXUS
Rx, Ct
SKODA
Citigo, Fabia, Rapid
MAZDA
CX-3, 2
SMART
Fortwo, Forfour
MINI
Cooper, Mini
SUZUKI
Alto, Splash, Swift, Celerio
Punto Evo, 500, Fiorino, Grande Punto, Panda, Kubo, Mito, Giulietta, Ypsilon
MITSUBISHI
Colt, Space, Star
TATA
Nano
Fiesta, Fusion, Ka
NISSAN
Cube, Pixo, Micra, Note
TOYOTA
Yaris, Iq, Prius, Auris, Aygo
HONDA
Insight, Jazz, Civic, Crz
PEUGEOT
206+, 107, 208, Rcz, 207, 308
VAUXHALL / OPEL
Agila, Corsa, Adam, Karl
HYUNDAI
i20, i10, ix20, i30, Genesis, i40
RENAULT
Grand Scenic, Wind, Clio, Twingo, Captur, Modus
VOLKSWAGEN
Polo, Golf 4, Golf 5, Up!, Fox
AUDI
A1
CHEVROLET
Matiz, Spark
CITRÖEN
C1, C3, Ds3, C2, C3, Picasso
DACIA
Logan, Sandero, Duster
FCA FORD
www.sykes-pickavant.com
SAVE: £100.00
KIA
MORE THAN 1.200 KG – LESS THAN 2000 KG
MORE THAN 2000 KG
AUDI
A3, A4, Q3, TT, A5
AUDI
A5, A6, A8, Q5, Q7, A6
BMW
Series 1, Series 2, Series 3, Series 4, Series 5, X1, X3
BMW
Series 6, Series 7, X5, X6
CHEVROLET
Orlando
CITRÖEN
Boxer
CITRÖEN
C4, C4 Picasso, C5, C-Crosser, Jumpy, Ds4, Jumper
FCA
DACIA
Duster, Logan
Ducato, Scudo, Jeep Cherokee, Jeep Grand Cherokee, Jeep Renegade, Jeep Wrangler, Freemont
FCA
Doblo, 500L, Bravo, Fiorino, 159, Delta
FORD
EcoSport, Edge, S-MAX
FORD
Focus, Kuga, Fusion, Mondeo, C-Max
HONDA
Doblo, 500L, Bravo, Fiorino, 159, Delta
HYUNDAI
SantaFè, Tucson
KIA
Sorento, Spartage
Ceed, Venga, Soul
LAND ROVER
Freelander, Discovery 4, Discovery Sport, Evoque, Range Rover
MAZDA
Cx-7, 3, 5
LEXUS
RX, CT, GS, LS
MERCEDES
Classe-B, Classe-A, Classe-C, E, Vito
MAZDA
6, CX5, CX7
MINI
Cooper, Mini Countryman
MERCEDES
MITSUBISHI
Asx, Lancer, Outlander, Pajero
Classe-E, Vito, Classe-M, Classe-G, GLA, GLC, GLE, GLK, GLS, ML, Classe-V
NISSAN
Qashqai, Juke, Leaf, Cube
NISSAN
Qashqai
PEUGEOT
Rcz, 3008, 5008, 508, 607, 407, Partner
PEUGEOT
Expert, Traveller
RENAULT
Fluence, Grand Scenic, Koleos, Megane Iii, Kangoo, Laguna, Scenic, Espace, Latitude
PORSHE
Cayenne, Macan
RENAULT
Trafic, Megane Initial, Kadjar, Master Korando, Rexton, Tivoli
HONDA HYUNDAI KIA
Accord, Civic ix35, i30, i10, ix20
SEAT
Leon
SSANGYONG
SKODA
Yeti, Roomster, Superb, Octavia
SUZUKI
Sx4, Vitara, S-Cross, Jimny
SUZUKI
Sx4
TOYOTA
Land Cruiser, RAV4
TOYOTA
Avensis, Prius, Verso, Auris
VAUXHALL / OPEL
Mokka, Antara, Vivaro, Movano
VAUXHALL / OPEL
Astra, Insignia, Meriva, Zafira
VOLKSWAGEN
Passat, Crafter, Touareg, T5, T6
VOLKSWAGEN
Golf 6, Scirocco, Polo, Caddy, Touran, Tiguan, Sharan
VOLVO
V50, C30, XC70, XC60, XC90
13 01543 679900
53452200
NEW
BEST PROFESSIONAL LED SELLER WORK LIGHT available november £39.95 30060100
Rechargeable multifunctional work light for professional use
A quick solution to assist the bearing to be pressed out on a wide range of common hubs large void for holding hubs and pressing out wheel • Ideal bearings diameter sits across the press allowing for large hubs to • Large be placed on the press ring • Useful alternative to V blocks and old bearing casings for use on 30 or 50 tonne rated • Suitable presses • Dimensions: 160mm (h) x 179mm (ø) £79.95 • Weight: 7.8kg
lighting modes: top light with direct beam and work • Two light with wide flood beam strong magnets and two 360° rotating hooks allow • Super for hands free operation swivel stand with strong inbuilt magnet • 180° High impact ABS plastic housing with impact resistant • polycarbonate lens Li-ion battery via the supplied USB charging • Rechargeable lead charging indicator: red - charging, green - fully • LED charged
workshop tools
UNIVERSAL PRESS RING
Specifications
Cable: 1m micro USB to standard USB • Charging Top Light: 3W LED Time: 3.5 hours • Work Light: 4W COB LED • Charging IP Rating: IP54 • Run Time Top Light: 8 hours • Weight: 320g • Run Time Work Light: 3 hours • Magnets: 3 • Hooks: 2 for use with press block - 08770000 •• Battery: 3.7V Li-ion •
rubber tool for installing the 08595000 • Flexible first pitch on common rail glow plugs • Also suitable for use on spark plugs anti-slip textured surface for • Special ultimate grip to reach spark and • Forglowhardplugs prevent • Helps cross-threading
£11.95
inner rim cleaner 66195500 75mm £54.95
special offer also available 66195500 INNER RIM CLEANER + WHEEL HUB GRINDING ATTACHMENT PACK For cleaning the wheel centring device and the attachment face between the wheel and hub, removes stubborn corrosion residues quickly and easily (3 - 25 second processing time per hub)
661922SP
For the optimal cleaning of the inner wheel contact surface
• Prevents corrosion related distortion of wheel bolt tightening torque • Completely removes burnt in corrosion • To be used only on the inside of an aluminium rim, particularly the inner • area prior to wheel balancing porous abrasives and cup shaped grinding plate ensures minimal • The dust are attached with velcro, making them easy to replace • Discs Optimized for the latest wheel rims with an internal diameter of 75mm • 160mm diameter
661927SP
+ +
60mm
SAVE: £6.95
£105.95 LIST PRICE: £112.90
3pc.
75mm ideal for bmw
SAVE: £6.95
£106.95 LIST PRICE: £113.90
3pc.
SALES@sykes-pickavant.com
NEW
FLEXIBLE STARTER FOR SPARK AND GLOW PLUGS
14
Silbertool®
silbertool® thread reformer Our new range of External Thread Reform Tools uses innovative non-cutting technology to return threads from M5 – M110 back to their original shape
NEW
• Allows original parts to be reused rather than replaced • Works on all types of thread including metric, fine and imperial with compatible rollers • No external energy source is required; process is completed by hand aren’t weakened during the reforming process; cold hardening leaves the thread 39% • Threads harder than those which have been cut reformed with the Silbertool® withstand the same static and dynamic loads as a new • Threads undamaged thread, with a higher fatigue endurance limit finished surface is smoother than if cut which reduces the chance of corrosion and • The improves thread lifespan
+
WATCH THE VIDEO
Roller packs must be used with the thread reformer; available in sets of 3, they are interchangeable and available to purchase separately
THREAD REFORMER OPTIONS
01421600 M5 - M16
01423600 M10 - M36
£379.00
£147.00 MAIN ASSEMBLY* * Rollers required but not included
MAIN ASSEMBLY* WATCH THE VIDEO HERE
* Rollers required but not included
WATCH THE VIDEO HERE
POPULAR COMPATIBLE ROLLERS FOR THE 01421600 POPULAR COMPATIBLE ROLLERS FOR THE 01423600 014216-304 Metric 1.00mm
014216-305
£39.00 PER ROLLER PACK
Metric 1.25mm
MORE ROLLER PACKS HERE
014216-306
www.sykes-pickavant.com
Metric 1.50mm
014236-206
Metric 1.00mm
Metric 1.75mm
014236-204
014236-207
Metric 1.25mm
Metric 2.00mm
£66.00 PER ROLLER PACK
014236-205
MORE ROLLER PACKS HERE
Metric 1.50mm
01426000 M10 - M60
£479.00
014236-203
MAIN ASSEMBLY*
01431100 M50 - M110
£759.00
* Rollers required but not included
MAIN ASSEMBLY* * Rollers required but not included
WATCH THE VIDEO HERE
Perfect for truck axles due to large thread diameter accommodation
POPULAR COMPATIBLE ROLLERS FOR THE 01426000 & 01431100 014311-104
014311-107
Metric 1.25mm
Metric 2.00mm
014311-105
014311-108 PER ROLLER PACK
Metric 1.50mm
Metric 2.50mm
014311-106
014311-109
Metric 1.75mm
Metric 3.00mm
15 01543 679900
£119.00
01426000 & ROLLER PACKS
01431100 & ROLLER PACKS
WATCH THE VIDEO HERE
SAVE: £200.00
SPECIAL INTRODUCTORY PRICE
£3295.00 LIST PRICE: £3495.00
• Promotes efficient engine operation with a cleaner engine • Hydrogen runs into the combustion engine’s air inlet system whilst running • Portable machine - enables use away from the normal garage environment Voltage Operation - works off the vehicle’s battery at a safe low voltage • Low when the engine is running • Easy to use - no or little disassembly of the engine required • Low maintenance - made in the UK • Fixed HHO supply • Two year warranty CASE STUDY 1 - 2011 FORD TRANSIT
ARRANTY TWO YEAR W
WATCH THE VIDEO
MADE IN THE UK
“the results speak for themselves” Prior to treatment, this 2011 Ford Transit was suffering from severe black smoke and a mean absorption coefficient value of 7.34. After 40 minutes of treatment with the Carbon Tec HHO, this reading was reduced to 1.33 1/m and the smoke was cleared. Based on an opacity limit of 1.50 1/m this took the vehicle from an MOT fail to an MOT pass.
CASE STUDY 2 - 2006 JAGUAR X TYPE This 2006 Jaguar X Type had failed its MOT with a mean absorption coeffecient level of 5.48 1/m. After running the Carbon Tec HHO for 60 minutes, this level was brought down to 2.49 1/m, allowing the Jaguar to pass its retest. With no hydrogen left in the system, dislodged carbon deposits continued to clear even after the process had been completed and after taking the vehicle on the road, a final test showed that the level had been brought down to 1.5 1/m.
SALES@sykes-pickavant.com
53400300
carbon tec hho
NEW
16
engine service
VIBRO-IMPACT GLOW PLUG REMOVER SET
UNIVERSAL GLOW PLUG TIP EXTRACTION MASTER KIT 08596000
085900V2
kit for glow • Complete plugs electrode extraction:
SAVE: £25.95
£249.00
M8 x 1.0, M9 x 1.0, M10 x 1.0 and M10 x 1.25
LIST PRICE: £274.95
all the necessary • Includes tools (9 x extraction rods,
the effective • For removal of 8, 9, 10, 11 & 12mm glow plugs
controlled impact • Uses torque to create vibration 4 low-torque settings for • Includes controlled vibration (10, 20, 30,
•
Square Drive
¼”
Max Torque - Right
40Nm
40Nm)
Max Torque - Left
Supplied with special long-reach 8, 9, 10, 11 & 12mm glow plug sockets, long and short extensions and universal joint for ease of access
10 / 20 / 30 / 40Nm
Air Inlet
¼”
Air Consumption
250 ltrs / min
Speed
12,000 per min
Air Supply
6.3bar / 90psi
ideal for the removal of brake • Also bleed nipples
4 x glow plug guides and 1 x slide hammer) to safely remove the terminal part of the glow plug electrode without damaging the cylinder head
08596100
£155.00
08596800
£155.00
M10 KIT
M8 & M9 KIT
£299.00
Universal Extractor Kit with Hydraulic Cylinder 18590000
£1295.00
kit complete with hydraulic cylinder for removing • Universal seized fuel injectors Note: Pump not included (20017000)
cylinder with 10 tonnes of force • Hydraulic Can be used as a mechanical kit for confined spaces - i.e. • against a bulkhead be used as a hydraulic kit for maximum power to help • Can release tightly seized injectors for the extraction of diesel fuel injectors • Suitable specifically: M17 x 1.0 for Bosch, M14 x 1.0 for Delphi, M16
x 1.0 for Toyota adaptor, M20 x 1.0 for Denso and M25 x 1.0 / M27 x 1.0 for Siemens
18590100 UNIVERSAL EXTRACTOR KIT
EXCLUDING HYDRAULIC CYLINDER
£999.95
www.sykes-pickavant.com
Universal Glow Plug Removal Kit
modular kit ALSO AVAILABLE AS
08594000
basic module with all components
£975.00 basic kit
modular system - the basic kit contains the tools required to be able • New to use each specific module; must be purchased with a modular component modular component can be purchased with the basic kit (SP) or • Each standalone (MO) to expand the basic kit as required and easy removal - also allows the user to restore the thread for • Quick installation of the new glow plug sockets and milling cutters for breaking and controlled removal of • Special the glow plug’s central electrode rod, extension and slide hammer to remove the stuck glow plug • Sliding Extension fitted with magnet to collect fragments and residues in the glow • plug’s seat
17 01543 679900
supporting feet allow for angle & position setting • Adjustable • Main side & top bars allow for various engine configurations
M8 MODULE
WITH BASIC KIT
085948SP £555.00
+
M9 MODULE
WITH BASIC KIT
085949SP £555.00
+
M10 MODULE
WITH BASIC KIT
085941SP £680.00
+
STANDALONE COMPONENT
085948MO £215.00
STANDALONE COMPONENT
085949MO £215.00
STANDALONE COMPONENT
085941MO £340.00
18582200 the complete solution £1025.00 for m9r engines 5 different solutions for the various ways that M9R injectors • Provides fail / break in the cylinder head, from full injector removal to injector nozzle tip solutions
components are profiled to match the shape of the cylinder head • Kit and components • Stage by stage solutions avoid cylinder head removal - saving time
now includes
for M9R 2.0 Dci Engines - Renault, Nissan & Opel
BOSCH INJECTOR REMOVAL SOCKET
requires mechadraulic cylinder - available to purchase seperately as P.N.18586500 / 18587000 (see below) MULTI-STAGE INJECTOR PULLING OPTIONS Refer to images A & B for visual guidance
£99.00
1.
Complete injector removal (including top electronic control module) achieved via a fork and plate combination that firmly grips around the upper part of the injector body
2.
Injector with top electronic control module removed achieved via fastening components onto the upper body in combination with the injector upper thread
3.
Broken injector body or unscrewed mid section achieved via a threaded connector screw that fixes into the injector valve body and nozzle retainer
4.
Seized or broken injector nozzle achieved via an expanding rod that pulls nozzle body, together with a special magnetic tool for core disassembly
5.
Seized or broken injector nozzle tip connects into nozzle tip via internal thread, to repair damaged original threads or cuts new ones if needed. Allows a strong pulling connection into the injector nozzle cone. This operation includes a sealing nozzle cap to prevent metal filings and swarf from passing into the lower engine area
12T MECHADRAULIC CYLINDER 18586500
Also available to purchase separately
b
12T MECHADRAULIC CYLINDER & ADAPTOR KIT
£359.95
18587000
includes 18586500 (left) and 5 x specific patented design attaches spindle directly • Kit • Unique threaded inserts to attach spindles direct to to cylinder cylinder and slimline (45mm depth • Lightweight for: - M10, M12, M14, and body) ideal for under-bulkhead operation • Suitable M16 x 1.25 - M18 x 1.5 8mm stroke • Threaded cylinder bore eliminates the need for a locking nut, increasing • clearance - Includes M18 x 1.5 insert £394.95 Manually operated cylinder (no need for hydraulic pump), with non-slip • grip handle
INJECTOR SLIDE HAMMER PULLER KIT WITH FREE FORK SET 085850SP SAVE: £104.95
£299.00 LIST PRICE: £403.95
Heavy Duty Slide Hammer Puller for removal of Bosch, Delphi, Denso and Siemens injectors
special offer
+
08559000
For use with 08585000 and 185800V2 a flexible u-joint adaptor for access in restricted areas • Features kit for use with 08585000 Heavy Duty Slide Contains: • - 6 x Injector adaptors: M14 x 1.5, M16 x 1.0, M17 x 1.0, M20 x 1.0, M25 x 1.0, M27 x 1.0 • Add-on Hammer Injector Removal Kit and 185800V2 Hydraulic - 4 x Injector Solenoid removers: M25, M27, M29, M30 - 2 x Nozzle Extractors: 6mm Tamperproof: 10mm hex - 7mm Tamperproof: 10mm hex
Duty Slide Hammer - Hammer Weight: 5.0kg (Total Weight: 8.0kg) • Heavy Supplied in blow-moulded case •
Injector Puller Kit
thread sizes with 185800V2 • Compatible Optional Converter (08580470) also available to work with • slide hammers with 5/8 UNF threads See website for application details
SALES@sykes-pickavant.com
A
08557000
engine service
24pc multi-stage injector pulling kit
18
HGV
special offer
Ball Joint Separator - HGV 080700SP
£147.95 • opening capacity 70mm, jaw width • Jaw 36mm Strengthened fork and lever, allows for greater force to be applied
HGV SPLIT BUSH KIT - master 18797000
£769.00
+
USE WITH YOUR EXISTING RAM
free hydraulic upgrade adaptor Allows the separator to be used with 1500 Series or 1800 Series Rams
BESTSELLER
For the removal and installation of split / spring eye bushes on HGV vehicles a unique clamping system and a series of shells for a range of bush • Uses sizes from 56mm Dia to 75mm Dia. used with a hydraulic pump (20017000) the kit allows the operator • When to work in a limited access environment and so reduce the amount of disassembly work required
‘Motorq’ Heavy Duty Torque Multiplier - 3/4 Inch Sq Input Dr
Applications
Shell 5 (65mm) - Mercedes Benz Actros, Atego
Shell 1 (75mm) - Mercedes Benz
Shell 6 (63mm) - DAF
Shell 2 (70mm) - MAN
Shell 7 (60mm) - Mercedes Benz / IVECO Eurostar
Shell 3 (68mm) - MAN Front Spring
Shell 8 (58mm) - Mercedes Benz / Volvo
Shell 4 (66mm) - IVECO Eurostar
Shell 9 (56mm) - IVECO Eurostar
80065500 HGV HUB PULLER KIT 21027500
£702.95 stage • Single epicyclic gears,
producing a 5 : 1 multiplication ratio
with • Use conventional torque wrenches for heavy duty applications
• After-sales service available • Input Drive: 3/4” sq dr / 36mm hex • Max Input: 540 Nm Output: 2700 Nm • Max • Output Drive: 1” Weight: 4:5 • • Supplied with reaction bars, in plastic storage case
Universal wheel HUB extractor for pitch circle • Variable diameter up to 445mm suit wheel stud sizes • Tocommonly found on DAF,
new £449.00
MAN, MERC, RENAULT, SCANIA & VOLVO models
Contains 5 x thread adaptor pairs;
x P1.5 x 65mm/L • M18 M20 x P1.5 x 65mm/L • M22 x P1.5 x 65mm/L • 7/8” - 11 BSF • 7/8” - 14 UNF •
Motorq Heavy Duty Torque WrenchES - break back style
‘Motorq 340’ - 1/2” Push-Thru Heavy Duty Torque Wrench 80134500
- 340 Nm / 60 - 250lbs.ft push-thru sq dr • 80Weight: • 1/2” 3.00kg Length: 783.5mm • •
80 - 340 Nm
MADE IN THE UK
SAVE: £27.50
£299.00 LIST PRICE: £326.50
‘Motorq 500’ - 3/4” Push-Thru Heavy Duty Torque Wrench 80050000
- 1000 Nm / 200 - 750lbs.ft push-thru sq dr • 300 • 3/4” Weight: 7.30kg Length: 1475mm • •
300 - 1000 Nm
www.sykes-pickavant.com 01543 679900 Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United Kingdom Tel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901 e-mail: sales@sykes-pickavant.com www.sykes-pickavant.com ALL PRICES QUOTED EXCLUDE VAT & ARE SUBJECT TO AVAILABILITY - E&OE PRICES VALID UNTIL 31ST DECEMBER 2018 - REF: SP318GBP COPYRIGHT 2018 - SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED
£439.95 Distributor Stamp: