Workshop Solutions
SPECIAL OFFERS
NEW PRODUCTS INCLUDES AIR TOOLS, BRAKING, COOLING, PULLERS, SUSPENSION, TIMING, WORKSHOP TOOLS & MUCH MORE! APRIL - JUNE 2014 www.sykes-pickavant.com
08550300
www.sykes-pickavant.com
08550500
5th Gear Puller - Ford
GM Gearbox Bearing / Race Remover
• Fast and simple method of removing the fifth gear on Ford front wheel drive transmissions before carrying out internal repairs • The split collar and retaining sleeve ensures a safe and positive location Applications: • B5 Gearboxes: Manual 5 speed fifth gear puller (pre -1995) • IB5 from 1995 – present: Fiesta to date / Ka 1 ‘96 – ‘08 • MTX-75: Focus 1, 2 & 3 Zetec engines (inc C Max 1) / Mondeo / Jaguar X Type • VXT-75: OFFER £69.95 Galaxy 1 1995 – 2006 / Transit SAVE £29.05 LIST PRICE £99.00 FWD & Transit Connect to date
• For the removal of taper bearing cups from clutch housings in M32, MT 20-6 and MT 32-6 manual gearboxes • Specifically designed to spread the load equally without danger of cracking the gearbox casing • Applications: Widely used in GM, Saab and Fiat Group
£89.95
Scan the QR code to watch a video of the GM Gearbox Bearing / Race Remover
38360000
DRIVETRAIN
Universal Engine & Gearbox Support
• Designed to support the engine or gearbox when the engine mountings have been removed e.g. When replacing timing / drive belts, water pumps etc • Removes the need for using cranes, transmission jacks etc • The unit is suspended from the chassis via the support hooks, the engine / gearbox is supported by the support pad and is counter-balanced against the underside of the vehicle by the support arms • Fully adjustable in all dimensions: - Extension: Min 630mm / Max 960mm - Support Plate Adjustment: 190mm
£249.00
Scan the QR code to watch a video of the Universal Engine & Gearbox Support
01370300
Universal Clutch Alignment Tool Kit
OFFER £39.95
SAVE £10.00 • For modern front wheel drive vehicles with or without pilot / LIST PRICE £49.95 spigot bearings with flywheel fitting diameters from 12 – 20mm • The tools main advantage is that it includes parallel expanding supports in place of more traditional tapered fittings that are hard to keep located • Easy to swap over adaptors suitable for clutch centre sizes from 14.4 to 29mm • Includes small cone: 14.4 - 21mm, large cone: 20.9 - 29mm and sleeves: 12, 14, 15, 16, 17, 18, 19, 20mm
016795V2
Alternator Free Wheel Pulley Set - 29 Piece
1
• Special set of Spline & Torx Socket Bits for the removal of free-wheel alternator pulleys • Locks the alternator, allowing the central locking bolt of the pulley to be released • Selection of 33 tooth reaction nuts and additional adaptors • Updated 29 piece set covers a wide range of popular applications including: BMW, Citroën, Fiat, Ford, Mercedes, Opel, Peugeot, Porsche, Renault, Toyota, OFFER £79.95 VW Group, Vauxhall, Volvo SAVE £20.00 • Applications list included LIST PRICE £99.95 Visit www.sykes-pickavant.com for full details
• A NEW concept for the removal of stubborn injectors • Provides controlled force to aid the removal of seized injectors where there is insufficient access for traditional slide hammers • Uses a multi-position frame, with adjustable legs of different lengths and a selection of mounting adaptors to allow alignment of the tool with the Each kit now includes a set of injectors on a wide variety of modern diesel engines solenoid sockets (01513500) and • The combination of variable leg lengths and selection of the appropriate 2 x tamperproof sockets adaptor for the cylinder head, allows the tool to be correctly positioned on most cylinder heads • Supplied with injector adaptors for most modern injector types: M14 | M16 | M17 | M20 | M25 | M27
185800V2
Hydraulic Injector Puller Kit
Tel: 01543 679900
Hydraulic Injector Puller Systems
£995.00
UPDATED KIT
185810V2
UPDATED KIT
Mechanical Hydraulic Injector Puller Kit
£1195.00
• As per 185800V2 kit above but includes a mechanical hydraulic ram • Allows use of the kit without the need for a separate hydraulic pump
185800V2PP
UPDATED KIT
Hydraulic Injector Puller Kit with Hydraulic Pump
£1350.00
• As per 185800V2 kit above but includes aluminium bodied hand pump - 2 Speed, 10,000psi fitted with gauge, hydraulic hose and ¾” hydraulic coupler
08585000
Heavy Duty Slide Hammer Injector Remover Kit
• Heavy Duty Slide Hammer puller for removal of Bosch, Delphi, Denso and Siemens injectors • Features a flexible u-joint adaptor for access in restricted areas • Contains: - 6 x Injector adaptors: M14 x 1.5, M16 x 1.0, M17 x 1.0, M20 x 1.0, M25 x 1.0, M27 x 1.0 - 4 x Injector Solenoid removers: M25, M27, M29, M30 - 2 x Nozzle Extractors: 6mm Tamperproof: 10mm hex - 7mm Tamperproof: 10mm hex • Heavy Duty Slide Hammer - Hammer Weight: 5.0kg (Total Weight: 8.0kg) • Supplied in blow-moulded case
DIESEL INJECTION REMOVAL
• 10 tonnes Hydraulic Hollow Cylinder provides the force – use with standard hydraulic pump (not supplied)
OFFER £245.00 SAVE £50.00
LIST PRICE £295.00
01513500
Electronic Diesel Injector Removal Socket Set
• Hexagonal socket set for removal of the electrical solenoid from modern diesel injectors • 1/2” sq dr. x 78mm length • In most cases, it is necessary to remove the solenoid before attempting to remove the injector body • Includes 4 x sockets: - 25mm Hex – Siemens Injectors - 2.0 Hdi (DW Series) As found on PSA, Ford, Toyota etc - 27mm Hex – Siemens Piezo Injectors – 2.0 Hdi Piezo (DW Series) As found on PSA etc - 29mm Hex – Bosch type injectors – Bosch Cdi / Hdi engines - 30mm Hex – Bosch type injectors – Bosch Renault / Nissan 1.9dCi
OFFER £57.95 SAVE £12.00
LIST PRICE £69.95
2
www.sykes-pickavant.com
085300SP
Hydraulic Hub Puller Kit
OFFER £190.00
STAR BUY
SAVE £40.00
LIST PRICE £230.00
Consists of manual and hydraulic components Includes: • Specially designed extra-wide hub puller plate • Hydraulic ram c/w nose piece • Mechanical Screw - 5/8” UNF x 140mm x 24mm hex • Slide Hammer - 5/8” UNF x 1.6kg
08530600
Slide Hammer Hub Puller
08531600
Includes: • Hub Puller Plate (08530870) • Adaptor for Slide Hammer (08531270) • Slide Hammer 5/8” UNF x 1.6Kg (08530700)
Hydraulic Hub Puller
Includes: • Hub Puller Plate (08530870) • Hydraulic Ram c/w nose piece (15000070)
OFFER £113.50
OFFER £105.50
LIST PRICE £136.50
LIST PRICE £129.50
SAVE £24.00
SAVE £23.00
HUB PULLERS
08530000
Mechanical Hub Puller
OFFER £65.50 SAVE £14.00
Includes: LIST PRICE £79.50 • 08530870 - Hub Puller Plate • 08531270 - Adaptor for Mechanical Screw • 08531100 - Mechanical Screw - 5/8”UNF x 4” x 24mm Hex
12730600
Hydraulic & Mechanical Hub Puller Kit
• Can be used on a variety of wheel stud pattern applications - 4, 5, 6 stud hubs, with pitch circle up to 203mm • SP1500 Series Hydraulic Power Ram allows for smooth, progressive application of up to 8 tonnes of force • Fine pitch thread for easy adjustment • Floating plunger with free moving legs, enables quick and easy attachment to vehicle hubs • Can be used in 3, 4 or 5 leg combinations • Heavy duty force screw with impact handle included, where shock action is required to ‘break’ stubborn hubs • Supplied in steel storage case
OFFER £209.95 SAVE £45.00
LIST PRICE £254.95
• Specification: - Leg Reach: 158mm - Spread Capacity: 203mm - Stud Hole Diameter: 15.8mm - Puller Plate Thread: 1.1/2” BSW - Hydraulic Ram Thread: 1.1/2” BSW - Impact Screw Thread: 1.1/2” BSW
12731100
Impact Force Screw
• Can be used in any SP Hub Puller in place of Hydraulic Ram or Slide Hammer (11/2”BSW thread) • Use in conjunction with 08251900 Shock Handle (right)
3
08251900 OFFER £39.95 SAVE £17.40
LIST PRICE £57.35
Shock Handle
• Use in conjunction with 12731100 Impact Force Screw (left) - allows for greater force to be applied
OFFER £29.95 SAVE £7.55
LIST PRICE £37.50
15000000 • SP1500 Series 8 tonnes Hydraulic Ram • Standard power unit for SP Hub Pullers and can also be used with many alternative SP puller applications e.g. 3 leg pullers, ball joint pullers, suspension bush removers etc
OFFER £65.50 SAVE £13.45
LIST PRICE £78.95
08540300
Slide Hammer Puller Kit Combi Pull & Split Collets Extractor
• 3 straight legs, 3 cranked reversible legs for internal and external pulling • 4 split collet internal extractors • Adjustable cone ensures positive location, minimising risk of slippage • Straight Leg - External Spread: 66 - 105mm - Internal Spread: 23 - 83mm - Maximum External Reach: 75mm • Cranked Leg - External Spread: 66 - 105mm - Internal Spread: 23 - 70mm - Maximum External Reach: 65mm • Split Collets - Internal Spread: 10.5 - 30mm
Two Leg Mechanical Thin Jaw Gear Puller
• Thin jaws enable access where clearance behind components is limited • Two legs for removing gears, races, bearings and sprockets • Drop forged steel legs, beam and jaws • Heat treated for strength and durability • Min - Max Spread: 0 - 75mm • Max Reach: 75mm • Can be upgraded for triple leg pulling • Supplied in carton
OFFER £67.95
Tel: 01543 679900
08600000
Hydraulic Ram - 8 tonnes force
SAVE £15.00
LIST PRICE £82.95
09810000
Multipull® Blind Housing Bearing Remover
• Remove blind housing bearings without OFFER £229.95 the need to dismantle machinery or SAVE £47.00 remove the running shaft LIST PRICE £276.95 • Positive seating allows even tension on inner and outer bearing rings, reducing resistance • Stabilisers reduce sideways movement and self-centre the puller • Min Spread: 20mm • Max Spread: 117mm • Adaptor Dia: 5.5 - 12.5mm • Puller Reach: 415mm
£309.95 •OFFER Supplied in carton
PULLERS
SAVE £65.05
LIST PRICE £375.00
08542100
Slide Hammer Assembly - 1kg
• For use with Sykes-Pickavant split collet type internal extractors • Hammer displacement 220mm • Hammer weight 1kg
15520000
Hydraulic Puller & Separator Kit
OFFER £51.50 SAVE £10.45
LIST PRICE £61.95
• Makes 4 different twin/triple leg pullers, plus bearing separator kit • Puller Min - Max Spread: 50 - 150mm • Puller Max Reach: 150mm Split Collet Internal Extractors • External Min - Max Spread: 20 - 105mm The split collet is pushed into the centre of the bearing and then expanded • External Max Reach: 876mm via the hex nut on the end of the collet until a secure grip is achieved. • Supplied in lockable metal case The slide hammer is then attached providing the necessary extracting force. Specifications Part No.
Internal Spread Min - Max mm
List Price
Save Price
Offer Price
09580900
6.5 - 8mm
£31.95
£5.45
£26.50
09581000
8.5 - 10mm
£31.95
£5.45
£26.50
09581100
10 - 12mm
£31.95
£5.45
£26.50
09581200
12 - 17mm
£36.95
£6.95
£30.00
09581300
19 - 22mm
£42.95
£7.45
£35.50
OFFER £379.95
09581400
22 - 30mm
£59.95
£10.00
£49.95
09581500
30 - 38mm
£72.95
£13.00
£59.95
LIST PRICE £458.95
09581600
38 - 50mm
£112.95
£19.00
£93.95
09581700
50 - 60mm
£134.95
£23.00
£111.95
£3.00
£10.95
SAVE £79.00
1/2” female to M8 male converter: 09582000
n/a
£13.95
4
www.sykes-pickavant.com
OFFER £239.00
08770000
LIST PRICE £299.00
Universal Press Support Block
Now includes numbered support block allowing the user to easily log specific vehicle placements for future reference • Universal Support for use with a workshop press • Easily press bearings on a wide variety of suspension arms • Three point contact guarantees a perfect, safe support • Features: - Adjustable height anvil bolts - Swivel element for added versatility - Safety Alignment brackets for security on press
08080000
Universal Suspension Arm Lever
OFFER £124.95 SAVE £74.05
• For lowering of the suspension arm and the LIST PRICE £199.00 separation of suspension components • Reduces the effort required, due to the unique design which uses leverage and the technicians’ own bodyweight to create the force required • Adjustable, multi-position swing point allows for variable applications – both LH & RH Scan the QR code to watch a video of the Universal Suspension Arm Lever
SUSPENSION
Scan the QR code to watch a video of the Universal Press Support Block
SAVE £60.00
08780000
Universal Press & Pull Sleeve Kit Car / LCV Kit
• Universal applications - Car - LCV • Contains 20x Press Sleeves in 2mm diameter steps • Inside Diameter Range: 34 - 72mm • Outside Diameter Range: 44 - 82mm • 4x Step Plates / 4x Pulling Spindles with thrust bearings • Supplied in moulded storage case
08795000
Upgrade Kit - From 08790000 to 08797500
• For owners of the Universal Press & Pull Sleeve Kit 08790000 (SUV / LCV) who wish to upgrade to the full contents of the combined LCV / HGV Kit - 08797500
OFFER £379.00 SAVE £166.00
OFFER £485.95
LIST PRICE £545.00
SAVE £99.05
Scan the QR code to watch an overview video of Suspension Removal & Installation Tools
LIST PRICE £585.00
08085000 084876V2
Universal Protective UPDATED KIT Clamp for Strut Insert Pistons Now includes 70mm pins for increased applications OFFER £65.50 • Fixes the piston rod in SAVE £14.00
position when replacing LIST PRICE £79.50 coil springs • Prevents the piston rod from being drawn back into the strut
Suspension Wear Indicator
• An innovative tool for detecting suspension and axle joint wear • For detecting faults in: Scan the QR code - Suspension Joints & Suspension Struts to watch a - Wheel bearings video of the Suspension Wear - Stabilizers, Bushes & Ball-Joints Indicator - Steering Gear & Links • The tool creates a rocking motion in any direction in order to detect movement in steering and suspension components • Uses weight of vehicle to highlight component wear under load conditions
OFFER £35.95 SAVE £37.00
5
LIST PRICE £72.95
Concentric Speedy Steering Rack Wrench
• For removal and installation of steering rack knuckles - 35 to 45mm diameter • Works on all steering racks with track rods up to 30mm diameter • Self locking rollers adjust automatically to the required knuckle diameter, to provide a safe and secure grip • Manufactured to OEM specifications, as required by Mercedes, PSA, Renault, Toyota and VW Group OFFER £99.00 • High Quality Grade Steels: SAVE £26.00 - Forged Steel body - Heat treated steel rollers LIST PRICE £125.00 - Steel tube with 30mm diameter hex • Roller cage is replaceable should the rollers become worn or damaged
Scan the QR code to watch a video of the Concentric Speedy Steering Rack Wrench
Tel: 01543 679900
08680000
08090000
CV Joint Puller 4 Way Ball Joint Separator Car / LCV applications
• Unique 4-way lever design allows for a wide variety of applications • 4 options are available, by removing the pin and selecting any of the 4 positions • Tapered, slim jaw fork design with tough, black epoxy coating • Specification: - Jaw Opening: 24 / 30 / 40 / 45mm options - Jaw Throat Width: 19mm - Jaw Throat Depth: 30mm
OFFER £59.95
STAR BUY
08060000
Long Reach Ball Joint Splitter
• Ideal for ease of access, without being restricted by wheel arches • Specification: - Length: 400mm - Jaw Throat Width: 18mm - Jaw Throat Depth: 70mm
SAVE £13.00
OFFER £19.95
LIST PRICE £72.95
SAVE £10.00
LIST PRICE £29.95
08390000
SUSPENSION
080500V2
OFFER £39.95
• Specialist tool for the SAVE £30.00 removal of CV joints on LIST PRICE £69.95 front wheel drive cars • No need to use a hammer – reduces risk of damage to the drive axle • Avoids the need to remove the entire front axle • Approved as a special tool by VW Group Audi, Seat, Skoda. VW – Ref: T20181
Heavy Duty Coil Spring Compressor 08450000
Internal Coil Spring Compressor
• Specially designed for vehicles with front or rear wishbone suspension • Designed to fit applications where the access hole in the lower wishbone is as small as 30mm diameter • Unique Torque Safety Key extends functionality and adds safety - 100Nm max torque - Allows for use with an impact wrench • Supplied with two pairs of specialist jaws from 90mm to 140mm diameter • Full applications list included in kit • Safe working load of 2500kg (25000N) • Fits a wide variety of vehicles with Wishbone Suspension, including: BMW / Citroën / Chrysler / Honda / Hyundai / Kia / Mazda / Mitsubishi / Peugeot / Renault / Seat / Skoda / Suzuki / Toyota / Volvo / VW
OFFER £495.00 SAVE £100.00
LIST PRICE £595.00
Unique Sykes-Pickavant design of vice-mounted Coil Spring Compressor • Features double-ended hex drive (2 x 24mm hex) for ease of use - Can be operated from either end using ratchet or 24mm wrench - Can be safely unwound in the event of shear pin failure • Hex drives at both ends, incorporate shear-pins for safety - Features external thrust bearing for ease of service - Heat treated, Self-lubricating operating screw • Safe Working Load = 15000N • Supplied with two sets of universal jaws: - Medium Jaws: 110-150mm dia - Large Jaws: 140-195mm dia • 084000 Series jaws can also be used with 08390000 Coil Spring Compressor (Requires 08393200 Screws) N.B. Not recommended for use with Air / Electric Impact Power Tools
OFFER £369.00 SAVE £100.00
LIST PRICE £469.00
6
NEW
COOLING
www.sykes-pickavant.com
03265000
Universal Hose Clamp
• Clamping Range: 8 - 70mm • 1/4” drive and thumb screw for adjustment
OFFER £25.00 SAVE £5.00
LIST PRICE £30.00
331595V2
‘315’ Series Cooling System Test Kit
OFFER £235.00
• The ‘315’ series Cooling System Pressure Test programme from Sykes-Pickavant provides extensive coverage for both popular and less popular models and is constantly updated as new models are released. More than 20 specialist cooling system cap adaptors are available • All components of the ‘315’ range are fully compatible with older SP Cooling System Kits and can be used to upgrade previous generations of Cooling System Pressure Test Kits which are fitted with quick-release connectors • For older systems with a threaded connection, an adaptor is available (03186870) • Contents: - Hand Pump with Pressure Gauge and Quick-Release fitting - Hose Assembly c/w quick-release fitting - 16 x Threaded Cooling System Cap Adaptors - 3 x Bayonet Fitting Cooling System Cap Adaptors - 1 x Cap Adaptor wrench
33156100
Cap Adaptor Mini Cooper S
£19.95
SAVE £50.00
LIST PRICE £285.00
Comprehensive applications listing provided with each kit
33157800
Cap Adaptor - Dennis Dart / Optare Solo • Suitable for Dennis Dart PSV’s and Optare Solo PSV’s
• Suitable for Mini Cooper S 2002 onwards
OFFER £29.95 SAVE £10.00
LIST PRICE £39.95
33150100
Hand Pressure Pump c/w Gauge
• 0 - 2.5bar / 35psi pressure pump • Gauge Diameter: 60mm • Suitable for ‘317’ Series caps • ‘318’ Series caps can be used with convertor 03176870
OFFER £69.95 SAVE £10.00
LIST PRICE £79.95
33194200
33195000
Combustion Leakage Tester
• Accurate and fast diagnosis of cylinder head gasket leaks • Quick connector for use with 315 / 316 / 317 Series Cap Adaptors • Suitable for use with both Petrol & Diesel engines • Supplied with both Standard & Sensitive Reaction Test Fluid (250ml)
£69.95 7
Reaction Fluid - Standard
• Replacement Bottle of reaction fluid for 33195000 Combustion Leakage Tester • Standard - 250ml bottle (White Cap)
£4.95 33194400
Reaction Fluid - Sensitive
• Replacement Bottle of reaction fluid for 33195000 Combustion Leakage Tester • Sensitive - 250ml bottle (Black Cap)
£4.95
Oil Pressure Test Kit
• Helps to diagnose worn oil pumps and engines, faulty oil pressure switches and pressure warning indicators • Shock protected dual scale gauge, for quick and accurate oil pressure checks • Permanently oil primed, long flexible hose, enables access to difficult to reach oil switch ports • Small profile, quick coupling adaptors with built-in shut-off valve for fast secure connection • Includes oil pressure test gauge c/w 1m oil primed hose and 10 x oil switch port adaptors
OFFER £169.95 SAVE £10.05
LIST PRICE £180.00
Tel: 01543 679900
31470000
31440000 • Measures the back pressure (or vacuum) via the Lambda Sensor socket, to indicate blocked or damaged catalytic converters OFFER £164.95 • Calibrated gauge scale indicates progressive pass / fail for tests at idle SAVE £10.05 speed and for tests under load - coloured indication LIST PRICE £175.00 • 2m heat resistant pipe for dynamic testing • Suitable for M12 x 1.25 and M18 x 1.5 Lambda (Oxygen) Sensor sockets • Fits most European, Asian, Japanese vehicles • Includes pressure gauge, hose assembly, 2 x Lambda Sensor Socket Connectors, 2 x thread cleaners and a special adaptor for Toyota Vehicles • Supplied in plastic case with foam insert
314875V2
UPDATED KIT
Fuel Injection Pressure Test Kit for Petrol Engine Vehicles
Updated kit now covers Alfa Romo, Fiat, Lancia and new Ford Ka vehicles • Universal Injection Pressure Test Kit for modern Electronic, Multi-point injection systems • Shock protected, fuel resistant dual scale gauge – to 10bar / 145psi • Relief valve for safe depressurisation OFFER £285.00 • Quick coupling adaptors and connectors SAVE £25.00 • Wide applications range: LIST PRICE £310.00 - S type, 8mm plastic push-in fittings, as used on Alfa, Audi, Citroën, Fiat, Ford, GM, Peugeot, VW etc - Schrader type valve test port adaptors (7/16 & 8mm) as used on Alfa, BMW, Chrysler, Ferrari, Fiat, Ford, GM, Mercedes, Mini, Volvo etc - Specialist Renault fittings for use on Renault 1.2 / 1.4 / 1.6 Petrol Engines - Clio, Twingo, Kangoo, Extra, Megane, Scenic etc • Supplied in plastic case with foam insert Optional fittings available to suit older vehicles
31462000
Common Rail Diesel (CRD) Fuel Return Flow Kit
• Designed for use on the injector return side of a CRD system • Helps to diagnose: - Poor or no engine starting - Poor engine running - Poor acceleration - General lack of engine power • Compact acrylic block design provides easy to read cylinder comparison (much easier to compare than with plastic bottles, due to compact design and graduation scale) • Fuel resistant, highly flexible rubber hoses • Suitable for solenoid injectors only • Contents: (Supplied in plastic case) - Graduated acrylic measuring block for up to 6 cylinders - Injector adaptor sets for: Bosch / Delphi / Denso / Siemens - Set of reduction pipes for small diameter flow back ports - Under bonnet hanging hook
314925V2
VW Group Fuel Pump Pressure Test Kit for PD (Diesel) & FSi Engines
Now includes 90 degree elbow to overcome access issues on certain models • A specially designed Fuel Pressure Tester for the PD & FSi ranges of engines as used by VW Group • 20bar Pressure Gauge – as both PD and FSi fuel pumps operate at higher pressures than normal fuel pumps UPDATED KIT • Extra long hose assembly for ease of access – 600mm • Includes special PD fuel pump quick connector (Diesel) and 2 x special FSi fuel pump connectors for 1.6, 1.8, 2.0 FSi engines with Bosch fuel pumps
OFFER £165.00
OFFER £129.00
LIST PRICE £199.00
LIST PRICE £149.00
SAVE £34.00
COMPRESSION & PRESSURE TESTING
Catalyst Back Pressure / Vacuum Tester
SAVE £20.00
8
NEW
www.sykes-pickavant.com
07763500
Opel / Vauxhall 1.0 / 1.2 / 1.4 Petrol Engine Timing Kit • Applications: Opel / Vauxhall Adam (‘12-) Opel / Vauxhall Astra J (‘09-) Opel / Vauxhall Insignia (‘11-) Opel / Vauxhall Mokka (‘10-)
Opel / Vauxhall Ampera (‘11-) Opel / Vauxhall Corsa D (‘09-) Opel / Vauxhall Meriva-B (‘10-) Opel / Vauxhall Zafira C (‘11-)
• Engine Codes: 1.0 - A10XEP 1.2 16V - A12XEL (LWD), A12XER 1.4 16v - A14NEL (LUJ), A14NET (LUJ), A14XEL (LDD), A14XER (LDD)
OFFER £225.00 SAVE £45.00
LIST PRICE £270.00
NEW 07755500
Nissan 2.0DCI, Opel / Vauxhall 2.0 / 2.3D CDTI & Renault 2.0DCI / 2.3DCI Diesel Engine Timing Kit
OFFER £95.50 • Applications: SAVE £19.50 Nissan Primastar (‘08-), Qashqai (‘07-), X-Trail (T31) (‘07-), LIST PRICE £115.00 Opel / Vauxhall Movano B (‘10-), Vivaro (‘06-), Renault Espace 1V (‘06-), Koleos (‘08-), Laguna 2 (‘05-’07), Laguna 3 (‘07-), Megane II (‘06-), Megane III (‘09-), Master III (‘10-), Scenic II (‘06-), Scenic III (‘09-), Traffic II (‘06-), Vel Satis (‘05-)
TIMING TOOLS
07757100
VW Group 1.2 - 2.0 Common Rail Diesel Engine Timing Kit
NEW
• Designed to fit the newest common rail diesel engines which are significantly different from the older PD engines. These CR engines combine belt and gear drives by using a toothed belt to transfer the drive from the crankshaft to one of the cam shafts then using gears to transfer the drive from one cam to the other • Applications: OFFER £209.95 Audi A1 (‘10-), A3 / A6 / Q5 / TT (‘08-), A4 (‘07-), SAVE £44.05 A5 (‘09-), Q3 (‘11-), Seat Alhambra (‘10-), Altea (‘09-) LIST PRICE £254.00 Exeo (‘09-), Ibiza (‘10-), Leon (‘09-), Toledo (‘09-), Skoda Fabia 2 (‘10-), Octavia (‘09-), Rapid (‘12-), Roomster (‘10-), Superb (‘08-), Yeti (‘09-), Volkswagen Amarok (‘10-), Caddy Maxi (‘10-), Crafter (‘11-), Eos (‘08-), Golf VI (‘09-), Golf Plus (‘09-), Jetta (‘09-), Passat (‘08-), Passat CC (‘08-), Polo V (‘09-), Scirocco (‘08-), Sharan (‘10-), Tiguan (‘07-), Touran (‘10-), Transporter T5 (‘09-)
07756005
VW Group Multi-Position Tensioner Wrench
OFFER £30.95
• Five adjustable positions for ease of access • Retains the tensioner to allow for tightening of the tensioner nut • Suitable for both petrol and diesel applications • Requires a 4mm Hex Key to adjust the positioning • OEM Reference: T10020 / V159
SAVE £7.00
LIST PRICE £37.95
07740000 07744400
Stretch Belt Fitting Tool - Dual Size Pulleys • Specially designed two-piece tool for installing and dismounting stretch belts on double pulleys where the two pulleys are of different diameters • Allows the belt to be installed in one operation OFFER £99.95 • Ideal tool for Ford Focus SAVE £20.00 LIST PRICE £119.95 applications with double pulley
9
Flexible Auxiliary Drive Belt Fitting Tool
• Designed to assist in the fitting of new style alternator / air-con / power steering drivebelts, which have no load adjustment mechanism and are designed to be “stretched” into place • Guides the belt into the correct position, whilst turning the crankshaft pulley by hand • Steel guide pins help lock the tool in-situ, OFFER £28.95 whilst the alloy body guides the belt over SAVE £6.00 LIST PRICE £34.95 the edge of the pulley, and supports the load on the belt during the fitting process
• Set of locking tools required for cam belt service and engine maintenance • Applications: Alfa Romeo Giulietta (‘10-), Mito (‘08-), Fiat 500 / C / Grand Punto / Linea (‘07-), Brava / Bravo (‘98-), Doblo (‘10-), Idea (‘04-), Marea (‘98-’00)
OFFER £136.95 SAVE £28.00
LIST PRICE £164.95
07764400
Ford Mondeo 1.8 & Mazda 2.0DISI / 2.3MPS Petrol Engine Timing Kit
07763400
• Set of locking tools required for correct valve timing on chain driven engines • Applications: Ford Mondeo 1.8 (‘03-’07), Mazda 3 (‘06-), 5 (‘05-), 6 (‘10-), CX-7 (‘07-)
OFFER £32.95 SAVE £17.00
NEW
LIST PRICE £49.95
VW Group 1.2TSI / 1.4T, FSI, GTI and 1.6FSI Petrol Engine Timing Kit • Set of locking tools required for chain maintenance • Applications: Audi A1 (‘10-), A3 (‘04-), Seat Alambra (‘10-), Altea (‘10-), Cordoba (‘06-), Ibiza (‘06-), Leon (‘07-), Toledo (‘12-), Skoda Fabia 2 (‘07-), Octavia 2 (‘08-), Rapid (‘12-), Roomster (‘06-), Superb II (‘08-), Yeti (‘09-), Volkswagen New Beetle (‘11-), Caddy Maxi (‘10-), Eos (‘06-), Golf IV (‘06-), Golf V (‘03-), Golf VI/Plus (‘09-), Jetta (‘06-), Passat (‘05-), Polo IV (‘02-), Polo V (‘09-), Scirocco (‘08-), Sharan (‘10-), Tiguan (‘07-), Touran (‘06-)
NEW
07763200
Alfa Romeo 1.4 Multiair (105 - 135 - 170 hp) Engine & Fiat 1.4 Petrol Engine Timing Kit • Set of locking tools required for cam belt service & replacement • Applications: Alfa Romeo Giulietta (‘10-), Mito (‘08-), Fiat Bravo (‘07), Punto (‘12-), Punto Evo (‘09-)
NEW OFFER £82.95 SAVE £17.00
LIST PRICE £99.95
Tel: 01543 679900
NEW
Alfa Romeo 1.4 T-JET & Fiat 1.2 / 1.4 16V Petrol Engine Timing Kit
OFFER £165.95
TIMING TOOLS
07763300
SAVE £34.00
LIST PRICE £199.95
07751900
Fiat 1.2 / 1.4 8V & Ford 1.2 Petrol Engine Timing Kit
NEW
• Set of locking tools required for cam belt service • Applications: Fiat 500 / C / Linea (‘07-), Doblo (‘05-’10), Florino (‘09-), Idea / Grand Punto (‘05), Punto Evo / Panda / Qubo (‘09-), Ford Ka (‘09-)
OFFER £145.00 SAVE £30.00
LIST PRICE £175.00
07767100
Crankshaft Pulley Holding Tool
• Commonly used on 1.4 & 1.6 16v Audi, Skoda and VW engines • OEM Reference: 3415
OFFER £82.95 SAVE £17.00
LIST PRICE £99.95
10
www.sykes-pickavant.com
08254500
Ford Transit Hub & Front Wheel Bearing Remover Kit
£330.00
• For Ford Transit Mk6 & Mk7 Hub and complete front wheel bearing removal • Features a heavy duty slide hammer which operates in two directions to achieve multiple operations in one tool Scan the QR code to watch • Provides three different solutions in one kit: an overview video of the - Can be used as a traditional hub puller Ford Transit Hub & Front - Remove the stubborn inner bearing race Wheel Bearing Remover Kit - Use the slide hammer in the reverse direction to remove the outer bearing race
3 IN 1 TOOL
Videos available on our website for all operations - visit www.sykes-pickavant.com
08254000
08253500
Ford Transit Rear Hub Puller
Ford Transit Brake Disc Remover
• Designed for removal of the Rear Hub on FWD Ford Transits • The bearings on these Transits often seize in place, requiring this special tool for removal of the hub • Application: Ford Transit 2000 onwards (FWD models only) • Includes safety chain to prevent hub assembly from accidentally falling on operators foot / leg
• Removes the front brake discs (without damaging the bearings) on FWD and RWD Ford Transits from 2001 onwards • Manufactured from Chrome Molybdenum for strength • Removes front brake discs without damaging the bearings • Can be used on FWD & RWD
N.B. Equivalent to Ford OEM tool ref 204-595-09
COMMERCIAL VEHICLES
N.B. Equivalent to Ford OEM Tool ref 204-345B
OFFER £238.95 SAVE £48.05
OFFER £82.95
LIST PRICE £287.00
SAVE £17.00
LIST PRICE £99.95
18070000 08070000
Ball Joint Separator – HGV applications
• Strong, heavy duty body, with strengthened fork and lever, allows for greater force to be applied • Can be upgraded to hydraulic power • Jaw Opening: 70mm Jaw Throat Width: 36mm Jaw Throat Depth: 50mm
OFFER £116.50 SAVE £23.45
LIST PRICE £139.95
• Hydraulic version of the 08070000 HGV Ball Joint Separator (above) • Uses hydraulic power from the SP 1500 series Hydraulic Ram • Provides up to 8 tonnes OFFER £214.95 SAVE £44.00 of hydraulic pressure LIST PRICE £258.95 • Jaw Opening: 70mm Jaw Throat Width: 36mm Jaw Throat Depth: 50mm
21205000
80050000
‘Motorq 500’ - 3/4” Push-Thru Heavy Duty Torque Wrench OFFER £359.95 SAVE £42.05
• 3/4” push-thru sq dr • 300 - 1000 Nm / 200 - 750lbs.ft • Length: 1475mm • Weight: 7.30kg
LIST PRICE £402.00
80055000
‘Motorq 550’ - Stepped 3/4” to 1” Heavy Duty Torque Wrench • 1” Sq. Dr (uses ¾” to 1” stepped convertor) • 700 - 1500 Nm / 500 - 1000lbs.ft • Length: 1475mm • Weight: 10.40kg
OFFER £569.95
11
Hydraulic Ball Joint Separator – HGV applications
SAVE £33.05
LIST PRICE £603.00
20 Tonne Loadstar “Plus” Press Frame Complete Kit (Special version for “Optare” Buses)
OFFER £1995.00 • 20T Hydraulic Cylinder and Pump SAVE £300.00 • Stand alone portable press frame LIST PRICE £2295.00 kit for pin pushing applications • Useful for removal of HGV suspension King Pins • Includes 5 extractor (pushing) pins for those hard to reach applications • Includes 1 extractor (pushing) pin for Optare applications • Auto-Grip collar and adaptor for quick change of pins
NEW
50175000
7 x Sliding Drawer Cabinet
• Lockable top compartment and drawers (Top compartment can be locked independently to drawers) • Lid opens using twin gas filled struts • Large transport handle • 7 x fully opening drawers • Anti-slip rubber covering on lid • Lockable swivel casters • Rigid corner protection • 160mm deep top compartment with 85 litre storage • High quality steel casters with protective rubber coating (2 x fixed & 2 x swivel) • Drawers run on low friction telescopic ball bearing slides • Tool storage compartments on both sides ideal for hanging screwdrivers etc • Dimensions: Width: 1030m - Depth: 500mm - Height: 800mm
Tel: 01543 679900
£595.00
A NEW range of Hydraulic Workshop Presses equipped with a two-speed manual pump, overload safety valve, automatic arm back-run system and V blocks
• Two speed pump • Automatic arm return • V blocks • Manufactured in the EU
Part No.
Rating
Height (mm)
Width (mm)
Depth (mm)
Bed Depth (mm)
Range (mm)
Weight (kg)
Price
53436100*
10T
1840
850
500
145
80 - 1000
135
£525.00
53436000*
15T
1930
920
650
170
85 - 950
150
£545.00
53436200*
20T
2030
940
650
180
65 - 1030
165
£665.00
53436300*
25T
2030
950
650
180
70 - 1030
170
£865.00
53436400*
30T
2060
1120
650
200
115 - 1020
230
£985.00
53436500
50T
2290
1220
650
210
70 - 1065
370
£1545.00
WORKSHOP EQUIPMENT
• Welded, heavy duty steel frame • Overload safety valve • Pressure gauge • Winch for table (For models 53436400 & 53436500) • Piston over-travel limit stop
*Recommended for use with Universal Press Support Block - 08770000 - See page 5 for further details
36600500
53390000
Fuel Extractor / Retriever
• Retrieve fuel following a filling error, removal of tank sender unit, changing or checking the fuel gauge, rinsing the fuel tank during body work etc • Operates from workshop compressed air (no risk of sparks) • Mobile 45‐litre tank (on wheels) • Cleanly draws up or pushes out fuel due to a venturi system • Includes 2 anti‐static ground cables, overflow line and 3 fuel probes • Emptying via the tank filler neck or fuel lines • Stainless steel
£419.00
MV5600
Pneumatic Oil Extractor
• Remove and extract waste fluids or oil from an engine with flexible PV tube and robust probe • Powered from compressed air • 70L tank capacity • Adjustable 10L oil capture pan • Visible fill level indicator • 1 - 2 L/Min Suction capacity depending on nozzle used • Working pressure 8-10 Bar • Emptying with compressed air 1-2 bar • CE Approved • Includes selection of PV tubes to cater for different lengths and diameters of dipstick tubes WARNING: Do not use with corrosive or inflammable products
Fuel Retriever Fuel Line Adaptor Set
£39.95
• Allows the Fuel Retriever (36600500 - above) to be connected in- line for extracting fuel from fuel lines and pumps • Connects just before the injection pump (on most fuel lines or filters) for completely safe removal of fuel
£269.00
12
www.sykes-pickavant.com
187000V2
OFFER £245.00 SAVE £54.00
Universal Press Frame LIST PRICE £299.00 c/w 12 tonne Hydraulic Ram • Updated unit now provides greater power • Allows easier operation - 50% more capable using the SP 12 tonne Hydraulic Ram • Includes adaptor ring for use with 08780000 Universal Press & Pull Sleeve Kit • Can be used in the following formats: - On its own as a stand alone tool - With Universal Press & Pull sleeve kits • Open frame design - 200mm of clearance through the press frame • Ideal for use with individual model specific press piece sets
187502V2
Press Piece Set - Opel Movano / Renault Master / VW T4 • Opel Movano / Renault Master and VW T4 Ball Joint Removal & Installation
OFFER £248.95 SAVE £50.05
LIST PRICE £299.00
18740300
Press Piece Set - Mercedes Sprinter • Mercedes Sprinter (‘96 onwards) • VW LT / Crafter
OFFER £203.95 SAVE £41.00
SUSPENSION
LIST PRICE £244.95
18747100
Mercedes Suspension Arm Adaptor Set • For use on Inner Torsion Bar Ball Joints - Mercedes W211 (E Class ‘02 - ‘09) - Mercedes W220 (S Class ‘98 - ‘06)
This set can be used in conjunction with either 18780200 Universal C Clamp or with 18780300 Ball Joint C-Clamp when working off-the-vehicle – However, for on the vehicle usage, the Ball Joint C-Clamp 18780300 has been designed for this purpose.
OFFER £95.50
18747200
SAVE £19.50
Mercedes Ball Joint Adaptor Set
LIST PRICE £115.00
• For use on Outer Ball Joints - Mercedes W211 (E Class ‘02 - ‘09) - Mercedes W220 (S Class ‘98 - ‘06) - Mercedes W230 (SL Class ‘02 - ‘09)
This set can be used in conjunction with either 18780200 Universal C Clamp or with 18780300 Ball Joint C-Clamp when working off-the-vehicle – However, for on the vehicle usage, the Ball Joint C-Clamp 18780300 has been designed for this purpose.
OFFER £135.95 SAVE £29.00
LIST PRICE £164.95
90206000
‘Vibro-Impact’ Air Hammer
• A unique concept to aid the removal of seized suspension parts • The ‘Vibro-Impact’ system allows for the controlled application of force via an air powered Impact Hammer • Allows the operator to control and gradually increase the force being applied, in order to loosen seized components • Features a built-in shock-absorber in order to minimise risk of damage if too much pressure is accidentally applied • Low vibration for user comfort OFFER £278.95 • Supplied with a handy wall mounted SAVE £56.05 storage bracket and a set LIST PRICE £335.00 of four impact hammers for variable applications
18780300
Universal C Clamp
• For the dismantling and installation of suspension parts on the vehicle • Specially designed for use with the ‘0878’ / ‘0879’ Series Press & Pull Sleeve Kits • Designed to allow greater access in restricted situations and where the universal press frame is not suitable • Special ‘trapezoidal’ threaded screw, allows for the application of greater force and can be used with Impact Air Wrenches, as well as standard ratchets / wrenches etc • Also capable of accepting the SP1500 or SP1800 Hydraulic Rams • Internal Frame dimensions: 170mm x 60mm • Use with specific Ball Joint piece sets for individual applications • Ideal for Mercedes applications - Ref: 18747100 / 18747200 - see above
OFFER £299.95 SAVE £75.00
LIST PRICE £374.95 Scan the QR code to watch a video of the ‘Vibro-Impact’ Air Hammer
13
08730200
08760200
OFFER £199.00
Tel: 01543 679900
• For removal and installation of rear wishbone / trailing arm bush on all Ford Focus models 1998-
VW Polo Front Control Arm Bush Tool
• For removal and installation of the rear bush on the front control arm, as fitted on: - VW Polo IV - 2001- Seat Cordoba III - 2002- Skoda Fabia - 1999-
OFFER £149.50
SAVE £41.00
SAVE £33.45
LIST PRICE £240.00
LIST PRICE £182.95
08730400
NEW
Ford Mondeo Rear Bush Tool
• Individual press piece set for dismantling and installing the rear wishbone / trailing arm bush • Suitable for: - Ford: Mondeo 2007-, Mondeo Estate 2000 - 2007, S-Max & Galaxy 2006- - Volvo: XC70 & V70 2007-, XC60 2008-, S60 & V60 2010-
LOWER PRICE
ON CAR SOLUTION
OFFER £375.00 SAVE £20.00
LIST PRICE £395.00
08760300
VW Group Control / Trailing Arm Bush Tool
• Heavy Duty mechanical kit for replacing and removing control / trailing arm bushes • Suitable for: - VW Golf V, VI 2003- - VW Golf Plus 2005- - VW Eos 2006- - VW Touran 2003- - VW Jetta III, IV 2005- - VW Scirocco 2008- VW Passat 2005- - VW Tiguan 2007- - VW Sharan 2010- - Audi A3 2003- - Audi TT 2006- - Seat Altea / Leon 2004- - Seat Toledo 2004 - 2009 - Seat Alhambra 2010- - Skoda Octavia 2004- Skoda Superb 2008- - Skoda Yeti 2009-
£239.00
08760100 08720600
Mini Control Arm Bush Tool
• For removal and installation of front control arm rear bushes OFFER £169.95 • Front control arm bush SAVE £35.05 tool for BMW Mini -07 LIST PRICE £205.00 • For Mini Cooper R50 / R53 (W10 / W17 / W11) • Left & Right arm bush replacement on the vehicle
VW / Audi Rear Axle Bush Insertion Tool
• For installation of bonded rubber / plastic type rear axle mounting bushes, on Audi A3, VW Golf 4, VW Bora - all models 2001 - 2004
SUSPENSION BUSH TOOLS
Ford Focus Rear Wishbone Bush Tool
N.B. Most models were originally fitted with hydraulic type rubber bushes when new - These can be knocked out manually. This tool is required for fitting the new bonded rubber / plastic type replacement bushes. Always replace in pairs.
OFFER £105.95 SAVE £22.00
LIST PRICE £127.95
08750100
Renault Laguna Rear Suspension Bush Tool
• For removal and installation of rear axle bushes on Renault Laguna 2 2001-
08041000
OFFER £126.95 SAVE £26.00
LIST PRICE £152.95
VW Alloy 4 Link Suspension Bolt Remover Set
• Simple tool to use with ‘vibro-impact’ air hammer (90206000 - see page 13) when bolt ends protrude from housing • Sleeve guides the impact end to free off and push bolt through the housing • Extension adaptor for removing bolts when pushed deep in the housing
£39.95
14
www.sykes-pickavant.com
• The GEN 2 type of wheel bearing is predominantly fitted to models from Ford, Land Rover, Mazda, VW Group and Volvo • Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers • Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings
08128000
GEN2 Bearing Removal Combination Tool Kit 78 & 82mm
• Combination Kit for Ford / Volvo / Land Rover / Mazda applications • Consists of all necessary parts from the 78 & 82mm kits - 78mm Kit - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3 - 82mm Kit - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70
BEARING REMOVAL / INSTALLATION
£425.00
08129000
VW Group Bearing
Ford 82mm Bearing
GEN2 Bearing Removal Combination Tool Kit for VAG Group 62 / 66 / 72 / 85mm • Combination Kit for Audi / Seat / Skoda / VW applications • Consists of all necessary parts from the 62, 66, 72 & 85mm kits - 62mm Kit - Audi A2, VW Lupo (Front) - 66mm Kit - Skoda Fabia, VW Fox (Front), Polo OFFER £725.00 SAVE £70.00 - 72mm Kit - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda LIST PRICE £795.00 Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front) - 85mm Kit - VW Multivan, Touareg, Transporter (Front / Rear)
081220V2
GEN2 Bearing Removal Combination Tool Kit 62 / 66 / 72 / 78 / 82 / 85mm
• Combination Kit for Audi / Seat / Skoda / VW applications • Consists of all necessary parts from the 62, 66, 72 & 85mm kits - 62mm Kit - Audi A2, VW Lupo (Front) - 66mm Kit - Skoda Fabia, VW Fox (Front), Polo - 72mm Kit - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front) - 78mm Kit - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3 - 82mm Kit - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70 - 85mm Kit - VW Multivan, Touareg, Transporter (Front / Rear)
£1215.00
OFFER £245.95 SAVE £53.05
LIST PRICE £299.00
15
08120000
Universal Wheel Bearing Kit
• Universal set for the removal and installation of flanges and wheel bearings, without the need for removal of suspension struts or wheel hubs from the vehicle (where access permits) • Remove and install wheel bearing without hub removal - Virtually eliminates damage to vehicle components - Removes the need to remove stubborn hub pinch bolt found on modern VW Group vehicles such as Audi A4, VW Passats etc • Tool configures square to bearing – No more having to square hub assembly on hydraulic press • Bearings fitted on nut assemblies – Greatly reduced drag in pushing bearing in / out • Flange extraction bolts supplied - Reduces time taken to complete overall job • Supplied in storage case – all components available individually as spare parts
Tel: 01543 679900
High quality air tools that set the standard for Torque! • Impact wrench with a smart design and ergonomically designed handle • Single-switch can be changed for easy forward or reverse operation • Easily adjustable torque regulator • Can be configured for right and left handed use • Composite body
90201500
90204500
Impact Wrench Specifications: Part No.
Drive
Max Torque Nm (Reverse)
Torque Nm (Fwd)
Noise (dBA)
90201000
1/2”
1600
1084
94.2
135
1.8
£179.00
90201500 (Mini)
1/2”
680
500
93.5
130
1.08
£169.00
90202000
3/4”
2600
2000
97
210
3.2
£499.00
90202500
3/8”
680
500
93.5
130
1.08
£169.00
90203500
1/4”
90
90
98.2
105
0.9
£139.00
90204500
1”
3100
2200
110
305
6.8
£849.00
90210000
Signal Hose - 10mm (3/8”)
Air Weight Consumption (kg) (l / min)
AIR TOOLS
£29.95
Price
90201100
Rubber Boot - For 90201000 • For use with 90201000 1/2” Impact Wrench (above) • Protects gun from accidental damage
• Length: 10 metres • High-visibilty hose to reduce trip hazard • Abrasion resistant outer cover • Working temp range -40°c to +65°c • Working pressure 300psi • Break pressure 1000psi
*Impact wrench not included
£16.99
• N.B. Hose supplied without fittings
53399500
53399000
Retractable Hose Reel - 20m x 10mm
• Spring driven retractable hose reel c/w wall mounting brackets • Heavy duty UV stabilised polypropylene • Suitable for compressed air or cold water up to 20 bar working pressure • Includes 20 metre x 10mm heavy duty black rubber air / water hose to ISO EN 2398 standard • 3/8” bsp female inlet and the hose terminates in a 3/8” bspt male
NEW
Hoses also available in 20m x 8mm (3/8” fittings) and 18m x 12mm (1/2” fittings). Contact Customer Services OFFER for more information
£199.95
SAVE £71.05
LIST PRICE £271.00
Retractable Hose Reel - 10m x 10mm
• Spring driven retractable hose reel c/w wall mounting brackets • UV stabilised polypropylene • Suitable for compressed air or cold water up to 20 bar working pressure • Includes 10 metre x 10mm heavy duty black rubber air / water hose to ISO EN 2398 standard • 3/8” bspt male inlet and the hose terminates in a 3/8” bspt male
NEW
Hoses also available in 12m x 6mm (1/4” fittings) and 12m x 8mm (3/8” fittings). Contact Customer Services for more information
OFFER £119.00 SAVE £13.00
LIST PRICE £132.00
16
www.sykes-pickavant.com
NEW
90803000
1/2” 18.0v Cordless Impact Wrench c/w 1 x battery
Ultra high torque 1/2” 18.0v Cordless Impact wrench c/w 1 x battery • Smart design and ergonomically designed handle • Easily controlled forward / reverse switch • Variable speed trigger • Breakaway Torque: 982Nm • Specification: - Weight: 3.08kg - Length: 240mm - Height: 265mm - Breakaway Torque: 982Nm - Battery: 18v 3.0Ah - Charging time: 45 minutes
90803100
1/2” Cordless Impact Wrench c/w 2 x 18.0v batteries • As per 90803000 (left) but includes 2 x 18.0v batteries
£499.00
- EU Version: 90803300
Max Torque 982Nm
- EU Version: 90803200
90803500
£150.00
Replacement Battery for 1/2” Cordless Impact Wrench
£649.00
WORKSHOP TOOLS
• 18.0v Lithium Ion Battery
INCLUDES SP INDUCTION HEATER + & COIL KIT FOR
£645.00
OFFER £645.00
(960200SP - UK 960201SP - EU)
SAVE £49.95
LIST PRICE £694.95
Contains 8 x popular sizes of interchangeable coils
960200SP
96015000
SP Induction Heater + with Coil Kit (96015000)
The SP Induction Heater + is a redesign and upgrade of the popular Mini-Ductor II® and uses new engineering technology for increased energy efficiency and ease of use. Now you can use the power of technology with a flameless heat to quickly release corroded or seized components and other metallic parts. All without the damage normally associated with gas torches. Heats in seconds! Key features of the SP Induction Heater + • Specifically designed for the UK/EU: 230v/6 amp/1000 watt – with full CE certification • Operates cooler for better efficiency, handling and product longevity • Long operating cycle time • Carry Case; with storage for all attachments, fits in tool chests for security • LED work light illuminates work area • Integrated CE filter improves handling of product • 1 year warranty - Parts/Labour • A true 1,000 watts max output power available • Kit includes rope, u-form and pre-formed coil
96015000
SP Coil Kit
• Contains 8 x popular sizes of interchangeable coils
£99.95 17
96026000
96025000
SP Rope Coil
SP Heat Pad
• Highly adaptable coil allows user to shape to suit • Use three / four windings of coil for maximum performance
£28.95
• Removal of decals, graphics, stripes, emblems and body mouldings etc • Softens the adhesive to make removal simple & effective
£59.50
385800SP
Tel: 01543 679900
Pneumatic Coil Spring Compressor Workstation Extra Heavy Duty Model c/w FREE Mercedes Bracket Set
Universal piece of equipment for assembling and disassembling struts and coil springs • Suitable for cars, 4WD’s and light commercials that use McPherson strut type suspension systems • Front and side spring clamps designed for fast changeover using unique Brackets System • Fitted with Extra Heavy Duty Pneumatic Cylinder - Compression force (at 10 bar) = 2452 kg • Ideal for Extra Heavy Duty applications i.e. SUV’s, 4WD’s etc where full spring compression is required • Double-depth front plate for use on extra-long strut assemblies • Safety locking valves system – locks safety MERCEDES BRACKET SET (38480100) UPPER BRACKET FOR MERCEDES A, B, C, E CLASS cage and prevents usage with cage open & LOWER BRACKET FOR MERCEDES E CLASS
£1595.00
FREE
WORTH £235.00
WHEN YOU PURCHASE 385800SP UP TO 2452
KG OF FORC E
0KG
160 UP TO
RCE OF FO
(AT 10 BAR)
386800SP
Mechanical Coil Spring Compressor Workstation c/w FREE Mercedes C Class Bracket
Universal piece of equipment for assembling & disassembling struts and coil springs • Standard workstation construction but with Heavy Duty Mechanical compression components in place of pneumatic parts • Allows for use where air supply is limited, restricted or unavailable i.e. Mobile use • High power mechanical spindle allows for MERCEDES BRACKET (38480500) the application of up to 1600kg of SPECIAL BRACKET FOR MERCEDES C CLASS 2010compression force onto contained spring WORTH £177.95 • Long main spindle achieves large 420mm WHEN YOU PURCHASE 386800SP of stroke – even greater than our pneumatic workstations • Powered by easy access 19mm hex drive on top of tool direct onto main spindle and can be used with either hand tools or even impact air tools • Includes adjustable vice clamp as standard • Compatible with all other Sykes-Pickavant workstation standard jaws, brackets & accessories • Dimensions: 1400 x 520 x 300mm
FREE
£795.00
WORKSHOP EQUIPMENT
SCAN THE QR CODE TO WATCH A VIDEO OF THE SUSPENSION WORKSTATION RANGE
Optional Accessories for use with Suspension Workstations 38480100 Mercedes Bracket Set - A, B, C & E Class
£235.00 38480500 Special Bracket Mercedes C Class (2010-)
£177.95
38480200 Upper Jaw Set for High Compression Springs
£39.95 38480600 Special Bracket Nissan Qashqai
£95.00
38480400 Special Bracket Porsche Cayenne / VW Touareg
£98.95 38480700 Double Depth Strut Vice
£115.00
18
www.sykes-pickavant.com
325200SP
Portable 4 Gas Analyser with Printer
Developed from the 32420000 gas analyser
NEW
• For fault diagnosis, tuning and pre-MOT testing • Truly portable hand-held gas analyser • Ultra light weight - only 1.1kg • Measures CO, HC, CO2, O2 (NOx model option available on request) to Class 1 accuracy • Suitable for both petrol and LPG vehicles • Ideal for both static and dynamic testing • Provides Lambda / AFR measurement and corrected CO • Internal memory stores up to 250 test results - manual & automatic recording options • Pump speed control - Improves battery life • Up to 4 hours internal battery life • Bluetooth connectivity to PC (additional software required) • Large graphic display • Free analytical software available to download • Includes printer • Includes AC & 12v chargers
£1495.00
MDX390SP
Sykes-Pickavant Battery & Electrical Systems Tester
• Higher Performance model for batteries rated from 100 – 1200 CCA • Suitable for luxury and 4x4 vehicles with higher level electronic systems • Determines the state of a Battery and Electrical System • Simple & Accurate Tests - without heat or sparks being created • Integrated printer for immediate review with customer Features: FREE 12V 2A ACCU-SMART - User defined printout header - Suitable for all battery types inc AGM and GEL BATTERY CHARGER Available Tests: WHEN YOU - 12v batteries & electrical systems PURCHASE - Starting & Charging system voltage MDX390SP - Bad Cell detection - Test discharged batteries down to 1 volt
TESTING
£449.00
WORTH £47.00
845122SP
33540000
Brake Fluid Tester
£74.95
• A quick and clear condition tester for brake fluid • Shows water content in a series of LED indicators • Quick change selection for DOT3, 4 or 5.1 fluid testing
30050000
Automotive Digital Multimeter
• Full control manual range selection • AC/DC Voltage measurement up to 600 Volt • DC Current measurement up to 10 A • Resistance measurement up to 2 MOhm • Diode & Continuity Tests • Overload protection & Auto Power-off • Low battery indicator • Soft holster for instrument protection • Dwell measurement from 0 to 120° • Temperature measurement from -40°C to 1000°C • Tachometer function measures from 500 to 10000 rpm • Supplied with test leads, croc clips, instructions & 9 volt battery
£99.95
19
PP319FTC
Power Probe 3
Probe – Connect – Detect! • Connect to a vehicle battery and you have a multitude of testers at your fingertips! Kit Contents: • Power-up components • Power Probe 3 • Continuity tester • Cigarette Lighter adaptor • Voltmeter • Battery clips with heavy • Positive / Negative indicator duty 4mm connectors • 20’ extension lead • Bad ground indicator • Instruction manual • Measures from 0 – 70 DC volts – in 1/10v increments
£129.95
34201000
Manual Pressure Brake Bleeder
34300100
NEW
Tel: 01543 679900
• Compact solution – for easy one man operation • Portable unit – no power or air supply required • Combination of Mityvac pressure bleeder & SP aluminium pressure bleed cap • OE recommended pressure brake bleeding solution • Controllable output via hand pump and pressure gauge
Automatic Brake Bleeder - 12v
• Compatible with ABS systems • 12v powering with reverse polarity warning • Includes pump with automatic shut off valve • Regulator from 0 to 3Bar • 5l reservoir with visible level and min level indication • Auto power OFF when min level reached • 12V power cable with jack (L: 4m) • Fluid cable for brake fluid with quick coupling system (Length: 4m) • Includes fluid collection bottle & European screw-on reservoir cap • Stainless steel body • Professional pump and regulator fitted
£199.00
£579.00
Model specific caps also available
34303000
Brake Bleeder Cap - Starter Set
£130.00 Brake Pipe Flaring Kits - 270 Series
03614000
Air Assisted Caliper Piston Wind Back Tool Kit • Air operated ram applies pressure to the caliper piston, while the handle is rotated by hand • Easy to use – works on standard workshop air supply • Reversible – works on both RH and LH applications • Can be used on Wind Back and Push Back pistons • Supplied with nine adaptors which cover a wide range of popular vehicles (applications list included) • Also supplied with 3/8” converter to use with adaptors from manual kit (03619200)
FREE DEBURRING TOOL WHEN YOU
• Brake flaring tool that produces both Convex PURCHASE ANY BRAKE PIPE FLARING and Double Lap flares to SAE & DIN standards WORTH £39.50 • Metric & imperial pipe sizes A professional quality tool for ensuring brake • From 3/16” to 1/2” / From 4.75mm to 12mm pipes are deburred effectively before fitting • Unique ‘Dial-a-Size’ Turret design Size Range: Internal: 3 - 12mm External: 4 - 14mm • Lever cam operation for quick flaring • Automatic punch extraction from flare Available Kits: • Screw clamp for accurate die alignment • Variety of kits available to suit requirements Part No. Suitable for brake pipe sizes • All components available individually 027000SP
SAE Single & Double Flares: 3/16”, 4.75, 6, 8, 10mm DIN Single Flares: 4.75mm
SAE Single & Double Flares: 027008SP 3/16, 1/4, 5/16, 3/8, 1/2”, 4.75, 6, 8, 10, 12mm DIN Single Flares: 4.75mm 027009SP
OFFER £79.95 SAVE £20.00
LIST PRICE £99.95
KIT
02740000
List Price
Save Price
Offer Price
£40.00
£199.00
£185.00
£31.00
£154.00
£239.00
£40.00
£199.00
£310.00
£55.00
£255.00
£215.00
£36.05
£178.95
SAE Single & Double Flares: 3/16, 1/4, 5/16, 3/8, 4.75mm £239.00 DIN Single Flares: 4.75mm
027001SP SAE Single & Double Flares: 3/16” & 4.75mm 027002SP
NEW
SAE Single & Double Flares: 3/16, 1/4” 4.75, 6mm DIN Single Flares: 4.75mm
BRAKING
• Starter cap bleeder set suitable for ‘343’ range of Electric Brake Bleeders • Precision engineered aluminium caps for the following applications: - New Ford Fiesta (34301000) - Nissan / Asian (Bayonet Type Cap) (34301100) - Euro Cap - Angled (Screw Type Cap) (34301400) • Full range of caps available - Contact Customer Services for details
20
www.sykes-pickavant.com
60080
14025
£101.80
• Distributor Pack of 12 pen lights • LED flash light with belt clip • Handy Magnet • Battery included
• Adjustable light through 180° • Hanging Hook • 3W COB LED • 200 Lumen • Magnetic base • IP54 Dust Protection • Includes 230v AC 60080-1 adaptor & 12v car Elwis Pen Light charger • LED flash light with belt clip • Handy Magnet • Battery included
£44.95
£8.49
03860000
08245000
Strap Type Oil Filter Remover For all filters up to 300mm diameter
Windscreen Wiper Arm Remover
WORKSHOP TOOLS
Elwis Pen Light - Pack of 12
Elwis “Compress Flex” COB LED Hand Lamp
• Ideal tool for removing stubborn windscreen wiper arms • Unique design allows for four different jaw widths to be selected • Reversible and interchangeable legs • Removable centrepiece for wider applications coverage OFFER £49.95 • Capacity from 19 - 36mm SAVE £10.00 LIST PRICE £59.95
03890000
Heavy Duty Chain Type Oil Filter Remover
• Heavy duty leaf type chain • Range: 25 to 150mm diameter • Ideal for HGV, plant and industrial applications, as well as Cars / LCV’s etc • 1” hex or 1/2” sq. dr
OFFER £33.50 SAVE £8.45
LIST PRICE £41.95
• Multi-purpose strap wrench, ideal for all oil filters up to 300mm circumference • Range: 20 to 300mm diameter • Strap Length: 1 metre long & 40mm wide • Strong steel shank and polyester strap OFFER £26.95 • Self tightening SAVE £7.55 band designed for fast and secure filter LIST PRICE £34.50 removal • Double ended 13/16” hex c/w 3/8” & 1/2” sq. dr
03950000
Valve Spring Compressor - Multivalve Engines • For the removal of valves on multivalve petrol & diesel engines • Reinforced frame made from rust-proofed steel • Supplied with 23mm & 28mm valve spring adaptors
OFFER £53.95 SAVE £11.05
LIST PRICE £65.00
30044000
Dual Laser Infra-Red Thermometer
OFFER £69.95 SAVE £10.00
LIST PRICE £79.95
21
• High precision non-contact thermometer • Dual Laser beams are targeted on a single spot – ensures optimum distance from object for accurate temperature measurement • Temperature range: -50° to 550°C • Accuracy: +/- 1.5% at 550°C • Features: - Backlit LCD display - MAX temp display - High & Low temp alarm setting • Ideal for Aircon, Cylinder temp, Brake temp, Cooling System, Exhaust Cat etc
66088700
Hook, Pick & Scraper Set - 9 Pc.
• Hardened chrome vanadium steel • Ergonomic soft grip handles • Ideal for the fitting and removal of O rings, seals, bushes, springs, cotter pins, fuses etc • Contents: 4 x standard hooks & picks / 4 x mini hooks & picks / 1 x straight edge scraper
OFFER £19.95 SAVE £10.00
LIST PRICE £29.95
Lee Cooper Quilted Jacket - Black
• 100% nylon jacket with boxed quilt effect design • 100% polyester light weight padding • Zip fastening to both front & hand pockets • Fully functional chest pocket with contrast zip
£54.99
Available sizes: M, L, XL, XXL
LCPNT205
Lee Cooper Cargo Work Trousers - Black • 2 combat thigh pockets • Pocket flaps with velcro • Zip fly • Belt loops • 65% polyester / 35% cotton twill
£45.99
LC022
Lee Cooper Hi-Top Safety Boot
Tel: 01543 679900
LCJKT436
• Available in UK sizes: 7 - 12 • Lightweight & Flexible with modern styling • Low profile anti-slip rubber sole • Steel Toe Cap to ISO20345 standard • PU Fabric Upper with textured rubber toe cap cover
SPWF66 / SPWF55
SP Safety Trainer / Boot - Moulded Sole
Available in waist sizes: 32”, 34”, 36”, 38”, 40”, 42” Available in leg lengths: Short (30”) Regular (32”) Long (34”)
SPWF55
£29.99
SPWF66
£19.99
LCSCK603
Lee Cooper Heavy Duty Work Socks
WORK WEAR
• Available in UK sizes: 7 - 12 • Dual Density PU, Oil & Acid Resistant • Steel Toe Cap to ISO20345 standard • Black Suede / Grey Mesh Upper • Steel Toe Cap & Mid-Sole
• Pack of 5 pairs - one size fits all
£9.99
LCTS003
Lee Cooper Technical Polo Shirt - Black
• Sportswear design, fit & styling • Contrasting red placket and grey side panels with pockets • 100% polyester pique fabric Available in sizes: M, L, XL, XXL, XXXL
£15.99 LCKP
Lee Cooper Knee Pads for Lee Cooper Cargo / Holster Trousers • Suitable for use with LCPNT206, LCPNT208 and LCPNT216 trousers • Material: EVA flexible
£6.99
LCPNT208
Lee Cooper Cargo Trousers - Black / Grey • Two colour trouser combining comfort & functionality • Extending velcro fastening tool belt loop • Adjustable elasticated gripper waistband • Triple stitched seams • Top loader knee pad pockets • High abrasion resistant contrast panelling to leg hem panels • 2 x front pockets, 2 x bellow back pockets, 2 x pleated leg pockets, Pen pocket, Phone pocket • 65% polyester / 35% cotton double warp double weft canvas fabric Available in waist sizes: 32”, 34”, 36”, 38”, 40”, 42” Available in leg lengths: Short (30”), Regular (32”) Long (34”)
£34.99
22
BATTERY CARE Extend your batteries’ lifetime with Accu-Smart® A totally automatic charger that works for you
Accu-Smart®, electronic “switched-mode” battery charger, offers greater power NEW MODELS compared to old chargers using “linear-mode technology” with transformers. NOW AVAILABLE • Suitable for Wet (Lead Acid), AGM, Gel & Fleece type batteries • No need for handling or mode selection, the charger works automatically, without external intervention, therefore it is not necessary to disconnect the battery from the vehicle before charging it • Accu-Smart® disposes of a regulator which allows the totally secure charging of the battery • Manages and regulates the charge of the battery, so can be left connected on the battery permanently • The Accu-Smart® charger restarts in case of a power cut and provides total protection against short-circuits, peaks of voltage (AC or DC), inversion of polarity and over-heating spikes Part No.
Accessories Included
Price
12 volts / 1 Amp
Eyelets, Crocodile Clamps
£35.00
845122SP
12 volts / 2 Amps
Eyelets, Crocodile Clamps, Cigarette Lighter Plug
£47.00
845124SP
12 volts / 4 Amps
Eyelets, Crocodile Clamps, Cigarette Lighter Plug
£62.00
845121SP
Rating
NEW
Applications
845127SP
NEW
12 volts / 7 Amps
Eyelets, Crocodile Clamps, Cigarette Lighter Plug
£90.00
845243SP
NEW
24 volts / 3.5 Amps
Eyelets, Crocodile Clamps
£90.00
High quality Battery Booster Packs, covering a wide variety of applications including: Automotive, Agriculture, Plant, HGV, Marine & Aviation All Pro-Start booster packs are perfectly safe for the on-board electronics on modern vehicles and are compatible with Petrol, Diesel & Hybrid vehicles • AGM internal batteries deliver high amperage instantaneously (2 year warranty) • Double insulated starting cables – 1.30 / 1.35 mtrs length • Illuminated voltmeter indicates booster charge level, booster & alternator function • Internal fuse protects against short circuits • Curved jaw clamps, fully insulated – blue clamp with LED lamp for safe use in the dark • Single-piece, moulded case – shock resistant (lifetime warranty on case) Other models available - Ask for details
861001SP
861002SP
£275.00
Pro-Start 700 12v Battery Booster Pack
£355.00
Pro-Start 800 12v Battery Booster Pack
• Cranking Amps: 700 • Peak Amps: 1860
• Cranking Amps: 800 • Peak Amps: 2370
PROPULSTATION Booster Pack complete with Docking Station Eliminates the risk and frustration of an uncharged booster pack! PROPULSTATION eliminates the risk and frustration of an uncharged booster pack due to the unique docking station. This means that it is always in the right place, always charged 100% and has 3 times longer lifetime. • AGM internal batteries deliver high amperage instantaneously (2 year warranty) • Robust shell case design with 5mm shatterproof polyethylene • Long and flexible cables with a double insulation offer a perfect resistance to extreme conditions • Robust, wide-opening clamps which are fully insulated and have a copper trace carrying the current to both of the bronze jaws Choose from: • AC model: Supplied with mains AC charger for workshop / showroom use • DC model: Supplied with 5m cable and one-way diode for vehicle use
521001AC
Propulstation 12v AC Battery Booster Pack • Cranking Amps: 700 • Peak Amps: 1860
£456.00
521001DC
Propulstation 12v DC Battery Booster Pack • Cranking Amps: 700 • Peak Amps: 1860
£415.00
521002AC
Propulstation 12v AC Battery Booster Pack • Cranking Amps: 800 • Peak Amps: 2370
£520.00
Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United Kingdom Tel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901 e-mail: sales@sykes-pickavant.com www.sykes-pickavant.com All prices quoted exclude VAT & ARE subject to availability - E&OE - Prices valid until 30TH JUNE 2014 - Ref: SPQ214GBP Copyright 2014 - Sykes-Pickavant Ltd. All Rights Reserved.
Other models available - Ask for details
521002DC
Propulstation 12v DC Battery Booster Pack • Cranking Amps: 800 • Peak Amps: 2370
£480.00 Distributor Stamp: