drybox The DryBox is a small oven, 4 x 2 meters or 13.12 x 6.56 feet, and is the ideal solution for drying parts on stands. It uses Drytronic technology to dry paint and takes no more than 15 minutes to dry all loaded parts.
The DryBox has a front pneumatic door with an incorporated emergency door. This permits the painter to position the parts on stands fast, easy and efficiently.
The walls and the floor inside the DryBox are made of a reflective metal sheeting that allows the radiant waves of the Drytronic panels (positioned in the ceiling) to reach all surface angles and dries perfectly in only 15 minutes.
CoverTop (the outer covering) is made of ABS injected plastic molds that can be opened and closed allowing installation and/or repair of any electrical or air lines. CoverTop is available in eight different colors to coordinate with all other Symach products.
The computerized DryBox allows the technician to select one of the drying programs or set the time and temperature to dry the parts. The oven works automatically with regard to the drying parameters selected.
Symach uses the DryBox in every FixLine layout. When there is only one SprayTron booth this allows the painter to maintain the production of 8-10 paint cycles when there are numerous parts on stands.
Drying performance
ConfiguraTION
The drying performance is of superior quality. It reaches 60 °C or 140 °F (measured at the part) in three minutes. In certain circumstances, it can reach 80 °C or 176 °F in five minutes. The Drytronic panels create radiant waves and the reflective metal interior creates a synergistic effect. This allows the temperature to rise inside the DryBox, creating a dual benefit of hot air and radiant waves. This reduces the drying time of clear coat to 15 minutes or eight minutes if using fast clear for miscellaneous parts.
The DryBox is available in: dimension 4 x 2 m or 13.2 x 6.56 ft, one pneumatic front door with an incorporated emergency door, the Drytronic radiant panel to produce radiant waves and heating, and the air fans are for inlet and outlet air ventilation to remove gas produced from the paint drying process.
mechanic
Ceiling and Floor
DryTronic panels
The radiant waves and the hot air are produced by two DryTronic panels. There are two different air fans for inlet and outlet ventilation.
reflecting floor
The ceiling is a tubular-welded frame to support the DryTronic radiant panels and the ventilation with an inlet air and filter. The floor is made of reflecting metal panels.
Wall frame Computer
reflecting metal computer
The DryBox’s multi-language computer automatically manages the different preset drying programs. It also allows the painter to set the time and temperature for the drying treatment.
The DryBox side panel is a tubular-welded frame. On the inside of the cabin, there is reflective aluminum sheeting. There is 5 cm or 2” of insulation in the wall and on the exterior side there is CoverTop, an ABS plastic panel available in eight different colors.
covertop
DOORS
CoverTop (the outer covering) is made of ABS injection plastic molds that can be opened and closed, allowing installation and/or repair of any electrical or air lines.
The DryBox has a front pneumatic door with an incorporated emergency door inside. The measurement of the door is 2 x 2,2 m or 6.56 x 7.21 ft.
covertop
DOORS
drybox Technical Data Control box
MEASURES AND DATA External booth width
4,18 m
13.7 ft
Symach board
microcontroller membrane
External booth length
2,17 m
7.13 ft
Keyboard
External booth height
3,46 m
11.3 ft
Display
2 x 20 DIGIT
Floor
metal sheet engraved
Controls
Max drying temperature
80°C
176°F
Room thermostat Solvent and gas leak detector
Air pressure
8 Bar
116 PSI
Drying program
temperature setting
Standard warranty
12 months
Power supply installed
1,3 Kw
Power consumption during preheating (3’:30”)
1,16 Kw
EXHAUST
Supply voltage
230 V˜
Outlet diameter
255 mm
10 ”
Frequency
50 / 60 Hz
Max flow rate
1.000 m3/h
588 CFM
Controls voltage
24 V˜
Motor power supply
230 V˜ / 50 Hz
Motor rated power
0,12 kW
GAS No. of panels
2
1 panel
INTAKE Outlet diameter
2 x 230 mm
2x9”
Solarys power output
16,4 Kw
55.9 BTU/h
Max flow rate
1.000 m3/h
588 CFM
Motor power supply
230 V˜ / 50 Hz
Hourly consumption LPG (G31) at 12 mbar
1,2 kg/h
2.64 lb/h
Motor rated power
2 x 0,02 Kw
Hourly consumption Natural Gas (G20) at 12 mbar
1,6 m3/h
0.95 CFM
Filters
20 mm
Line pressure LPG gas (G31) - Natural Gas (G20)
20 mbar
0.29 Psi
Operating pressure LPG gas (G31) - Natural Gas (G20)
12 mbar
0.17 Psi
Fitting size
1”G
Catalyzer life
35.000 hours
0.7 ”
pneumatic aluminum door Height open door
4,15 m
13.6 ft
Width door
3,00 m
9.84 ft
Height door
2,00 m
6.5 ft
LIGHTS
emergency door
Installed power
0,108 kW
Supply voltage
230 V˜
Frequency
50 / 60 Hz
Color type
daylight color
Color temperature
5.200 °K
EU: CE
Light flow of lamp
EL 35°C 4.300 Lm
cETLus Listed - Intertek 5000803
No. of PowerLux
1x (2 neon)
ISO 9001
Estimated life
24.000 hours
Door width
0,90 m
2.9 ft
Door height
2,00 m
6.6 ft
APPROVAL Europe North America
Via Bazzane 69, 40012 Calderara di Reno (BO), Italy info@symach.com - ph: +39 (0)51 96 31 61
www.symach.com