KombiTron The KombiTron is a drying cabin that works in conjunction with a SprayTron booth, this product is exclusive to Symach. When combined with one SprayTron and equipped with robots, the daily production with 2 painters is 16-20 paint cycles per day. The KombiTron dries paint using an Easydry robot, not a burner. The KombiTron is a cabin that dries vehicles or pieces on stands in 8-12 minutes on average, this is because it is not using hot air, as opposed to a conventional oven it uses 100% radiant waves. The inside walls and floor of the KombiTron are made of a reflective metal that collects and reflects the radiant waves released from the Easydry robot against the vehicle or painted parts without wasting any energy. The KombiTron has an independent ventilation system for inlet and outlet air. The ventilation system removes the solvent gases that are produced during the paint drying process. The KombiTron is equipped with side pneumatic doors and CarMover rails allowing painters to move vehicles in and out in a few seconds. A KombiTron, including robots, is normally installed in FixLine projects to produce 16-20 paint cycles per day.
Pneumatic side door
Drying performance The KombiTron drying performance with the robot is of 8-12 minutes time in base of different hardeners used inside clear paint.
Metal Reflecting Panel
Computer
Configuration The SprayTron is available in: • 2 different length; 8 meters or 26.24 feet and 9 meters or 29.52 feet. • With 2 pneumatic side doors. Doors The KombiTron has a pedestrian door and two side doors opening and closing pneumatically and vertically, avoiding every dust moving.
Computer The computer of the KombiTron is integrated in the one of the Easydry Robot, please refer to Easydry catalogue for more information. In addition to the standard functionality of the Easydry, the KombiTron can manage the two additional group of Drytronic catalytyc panels; one in the front and one in the back wall of the booth, to dry properly eventual bumpers installed on the car or pieces on stands.
Wall frame The KombiTron side panel is a frame in tubular welded and on the side inside the booth there is a reflecting aluminum sheet, in the middle there is 5 cm or 2” of insulation and on external side there is the CoverTop, it is an ABS plastic panel available in 8 different colors.
Inspection window
Reflecting floor
CoverTop
Roof and floor The roof’s frame is in tubular welded to support the air ventilation channel and the filter for the inlet air. The floor is in reflecting metal sheet.
CoverTop The outer covering of the KombiTron is of “CoverTop” panels, made in ABS injection plastic mold, can be opened and closed, allowing to install the electric or air compressed plant inside the SprayTron wall.
Mechanic The ventilation inlet and outlet is with two different fans.
TECHNICAL DATA Measures and data Outside length mod. A: Outside length mod. B: Outside width mod. A: Outside width mod. B: Inside height mod. A: Inside height mod. B: Weight: Warranty: Air unit Exhaust duct flange: Inlet duct flange: Max flow rate: Motor power supply: Motor rated power: Inverter: Manifold:
8,80 mt 9,80 mt 4,10 mt 5,00 mt 2,70 mt 3,20 mt 2500 kg 12 months
28.8 ft 32.15 ft 13.4 ft 16.4 ft 8.8 ft 10.4 ft 5511 lb
400 x 600 mm 15.7”x23.6” 400 x 600 mm 15.7”x23.6” 8000 cu.m./h 282 500 ft³/h 400 V~ 230 V~/60 Hz 2 kW 6.8 BTU/h 2 kW 6.8 BTU/h 0,6 x 0,4 mt 1.9 x 1.3 ft
Filter area inlet Prefilter efficiency rating: Floor specifications Steel engraved: Carmover rails:
1000 x 1000 mt 3280.8 ft pz. 5x 4,00 mt pz.5 x 13.1 ft
Pneumatic side door Side door width mod. A: Side door width mod. B: Side door height useful: Open side door height: Control box Installed power: Supply voltage: Frequency: Controls voltage:
M5
5,80 mt 6,80 mt 2,10 mt 4,46 mt
19 ft 22.3 ft 6.8 ft 14.6 ft
Lights Installed power: Chromatic yield index: Light flow of lamp: Supply voltage: Colour type: No. of Powerlux: Estimated life: Frequency: Colour temperature: Mean lighting:
0,216 kW 0,93 Ra EL 35°C 4300 Lm 230 V~ daylight colour 2 x (6 neon) 24000 hours 50/60 Hz 5200°K 1000 Lux
Approval AUSTRALIAN
3 Kw 400 V~ - 230 V~ 50/60 Hz 24 V~
10.2 BTU/h
AS/NZS
Europe: EU: CE - ATEX II 3 G X Australia: Compliant to Australian safety standards AS/NZS 4114.1:2003 – AS 3814.1:2009 North America: cETLus Listed - Intertek 5000803 ISO 9001