Synfiber Workwear 2016 by Würth Modyf Norway

20 16 SOLID CRAFTSMANSHIP.

CONTENTS

SPECIAL WORKWEAR

WORKWEAR

WINTER CLOTHING

RAINWEAR

ACTIVE

PROFILING

FOOTWEAR

ACCESSORIES & SAFETY

WASH & CARE

SIZE & MEASUREMENT CHARTS

SPECIAL WORKWEAR Flame-retardant. Fluorescent. Safe.

HI-VIS

SOLID CRAFTSMANSHIP.

20712 COVERALL EN ISO 20471 CL.3

NEW

Expected in stock April. Orange/black 20712 5 Yellow/black 20712 6 Size: S-4XL

QUALITY: 85 % polyester/ 15 % cotton, 295 g/mÂ˛. Contrast fabric: 65 % polyester, 35 % cotton, 310 g/mÂ˛.

Chest pockets with good storage space, pocket for ID-card.. Space for profiling.

Expansion in back for good movability. Sleeve pocket and pen pocket. Space for profiling.

Holder for timber pencil.

Under arm ventilation. Two way YKK zipper. Elasticated waist. Stretch panel for increased movability and comfort.

Side pockets.

Zipper access pocket.

Hook and loop adujustment.

Back pockets.

Thigh pocket. Ruler pocket, knife pocket and pen pocket.

Outer kneepad pockets for knee pads 20 or 29 cm.

Loxy 9201 reflective bands.

5 cm extra bottom hem for a handy extension of leg length.

HI-VIS Hi-Vis means being safe at the workplace and able to carry out your work as a tradesman safely. Most important, this really means: getting home safely to your family after a productive day at work. You can be sure all our Hi-Vis garments are certifed and approved according to the required visibility norms. So you can focus on your work.

SYNFIBER PRODUCT CATALOGUE 2016

SOLID CRAFTSMANSHIP.

HI-VIS

23912 CRAFTSMAN TROUSERS EN ISO 20471 CL.1 Craftsman trousers with great fit. Side pockets, spacious holster pockets, thigh pocket, cell phone pocket, ruler pocket, button for knife sheath, pen pocket, ID-card pocket, hook and loop fastener for tool holders in both sides of the waist. Reinforced, outer knee pad pockets for 20 or 29 cm kneepads. 5 cm extra bottom hem for a handy extension of leg length. Black/orange 23912 5 Black/yellow 23912 6 Size: 44–66

QUALITY: 85 % polyester/ 15 % cotton, 295 g/m². Contrast fabric: Cordura®, 213 gm²/ 65 % polyester/ 35 % cotton, 310 g/m².

23412 CRAFTSMAN TROUSERS EN ISO 20471 CL.2

Elasticated waist, side pockets, back pockets, thigh pocket, ruler pocket, hook and loop fastener for tool holder, phone/pen pocket. Outside knee pad pockets adapted for 20 and 29 cm knee pads. 5 cm bottom hem for a handy extension of leg length. Expected in stock January.

Perfect fit! Spacious, re-inforced detachable holster pockets (YKK Strap 8 Multi adapter system), side pockets, cell phone pocket, thigh pocket, ruler pocket, pen pocket, ID-pocket. Button for knife sheath, hook and loop fastener for tool holders in both sides of the waist. Outside knee pad pockets with Cordura® re-inforcement. 5 cm bottom hem for a handy extension of leg length.

Black/orange 21412 5 Black/yellow 21412 6 Size: 44–66

Orange/black 23412 5 Yellow/black 23412 6 Size: 44–66

21412 WORK TROUSSERS EN ISO 20471 CL.1

QUALITY: 85 % polyester/15 % cotton, 295 g/m². Contrast fabric: 65 % polyester, 35 % cotton, 310 g/m².

NEW

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: 85 % polyester/15 % cotton, 295 g/m². Contrast fabric: Cordura®, 213 gm²/ 85 % polyester/ 15 % cotton, 295 g/m².

HI-VIS

SOLID CRAFTSMANSHIP.

22712 6 WORK JACKET EN ISO 20471 CL.3

22812 WORK JACKET EN ISO 20471 CL.2

Expansion fold in back, two chest pockets, one incl. ID-pocket. Side pockets, sleeve pocket and inner pocket, under arm ventilation. Cordura® reinforcements. Hook and loop adjusters around the wrists and bottom hem.

Expansion in back, two chest pockets, one incl. ID-pocket. Side pockets, sleeve pocket and inner pocket, under arm ventilation. Cordura® reinforcements and hook and loop adjusters around the wrists and bottom hem. Expected in stock April.

Yellow/black 22712 6 Size: S-4XL

Orange/black 22812 5 Yellow/black 22812 6 Size: S–4XL

QUALITY: 85 % polyester/15 % cotton, 295 g/m². Cordura® reinforcements.

QUALITY: 85 % polyester/ 15 % cotton, 295 g/m². Contrast fabric: 65 % polyester, 35 % cotton, 310 g/m². Cordura® reinforcements.

21212 WORK SHORTS EN 471 CL.1

23812 CROPPED TROUSERS EN ISO 20471 CL.2

Slash pockets, back pockets, thigh pocket, ruler pocket, hammer holder, phone/pen pocket.

Slit pockets, re-inforced holster pockets, loop ties for tools and outer knee pad pockets for 20 cm kneepads. Thigh pocket, cell phone pocket, ruler pocket, knife sheath button, pen pocket and ID-card pocket. Hook and loop fasteners for tool holders in both sides of the waist.

Orange 21212 5 Yellow 21212 6 Size: S–3XL

NEW

QUALITY: 85 % polyester/ 15 % cotton, 295 g/m². Contrast fabric: 65 % polyester, 35 % cotton, 310 g/m².

Orange/black 23812 5 Yellow/black 23812 6 Size: S–4XL

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: 85 % polyester/15 % cotton, 295 g/m². Contrast fabric: Cordura®, 213 g/m²

HI-VIS

SOLID CRAFTSMANSHIP.

NEW

35924 KAURA SOFTSHELL JACKET EN ISO 20471 CL.2

35926 MYKEN FLEECE JACKET EN ISO 20471 CL.3

Flexible, comfortable and light water repellent jacket. Two side pockets and chest pocket with zipper. Pocket for ID-card and inner pocket. High and protective collar with a soft inside and zipper with a protective flap preventing chafing against the chin. Hook and loop adjuster at cuffs and drawstring at bottom hem. Plenty of space for company profiling. Expected in stock: Yellow/February, orange/April.

Comfortable and warm knitted fleece jacket. Two side pockets and chest pocket with zipper, elastic drawstring at bottom hem. Expected in stock May.

Yellow 35924 6 Orange 35924 5 Size: S-4XL

Yellow 35926 6 Orange 35926 5 Size: S–5XL

NEW

QUALITY: 100% polyester 280 g/m2.

QUALITY: 92% polyester, 8 % spandex, 310 g / m². Breathability: 10 000 g/m² per 24 t. (ASTM std.)

NEW

35922 6 LIGHT FLEECE JACKET EN 471 CL.2

35925 6 HELNES HOODED JACKET EN ISO 20471 CL.3

Comfortable and soft zippered jacket with medium height collar. A protective flap prevents chafting against the chin. Side pockets with zippers.

Comfortable and visible hoodie in a college/fleece quality with mesh lining. Two pockets in front and chest pocket with zipper, hood with drawstring. Expected in stock May.

Yellow/black 35922 6 Size: S–4XL

Yellow 35925 6 Size: S-4XL

QUALITY: Supersoft fleece, 100 % Polyester, 165 g/m².

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: 100% polyester 280 g/m2.

HI-VIS

SOLID CRAFTSMANSHIP.

35923 SWEATSHIRT EN 471 CL.2

35925 1 FLEECE POLO (LIGHT VISIBILITY)

Sweatshirt in fluorescent colours. Sewn reflective band around the waist and sleeves. Brushed micro fleece inside.

Soft polo with black zipper and contrast stitching.

Yellow/black 35923 6 Orange/black 35923 5 Size: S–4XL

QUALITY: 100 % polyester, 280 g/m².

Yellow/black 35925 1 Size: XS–3XL

QUALITY: Supersoft fleece, 100 % polyester, 165 g/m².

17928 T-SHIRT EN ISO 20471 CL.2

27618 TENNIS SHIRT EN 471 CL.2

27818 TENNIS SHIRT EN 471 CL.2

T-shirt in light and comfortable material, airy mesh panels under the sleeves and reflective band around waist. Fast drying and breathable fabric.

Stylish tennis shirt with three buttons and contrast coloured collar.

Comfortable and visible, with collar and arm rib in contrast colour.

Yellow 27618 4 Orange 27618 5 Size: S–3XL

Yellow 27818 4 Orange 27818 5 Size: S–3XL Orange: M-3XL

Orange 17928 5 Yellow 17928 6 Size: S–4XL

QUALITY: 100 % polyester, 150 g/m².

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: 100 % polyester, 150 g/m².

SYNFIBER HI-VIS The standard specifies requirements and test methods for visibility clothing concerning ample visibility in exposed situations under all sorts of lightning conditions. EN ISO 20471 will eventually replace EN 471. All new products into the market will now be certified to EN ISO 20471. However, it will be a gradual transition between these two standars the next few years. During this period, both EN 471 and EN ISO 20471 certified garments will be on the market simultaneously. EN ISO 20471 HIGH VISIBILITY The new norm will essentially provide the same protection for the user and standard sets still require that high-visibility garments visually should highlight the userâ&#x20AC;&#x2122;s presence. EN ISO 20471 may also be used in high risk situations and not just for normal professional use . Requirements for the visible area of fluorescent material and reflective material and three class sections are retained. Design requirements have changed to what part of the body the garment covers and not as previously, garment type. Eg. in the new norm must all garments in class 3 cover over the body and must have a minimum of sleeves with reflective material or long legs with reflective bands . Garments may also be sertified as sets to achieve class 3. Eg . jacket cl. 2 and trouser cl. 1 can achieve class 3 . The former classification of reflective material in level 1 or 2 expires . Reflective and fluorescent materials shall be equally distributed on each garments front and back with a maximum deviation of +/- 10 %. Minimum area per m2 garment: Fabric Class 3 Class 2 Class 1 Fluorescent material 0,80 0,50 0,14 Reflective material 0,20 0,13 0,10 The requirements for colour fastness are also stricter: Products must undergo tests and be approved for colour fastness for a minimum of five wash/dry. Product lifecycle and visibility degree may be limited by several factors other than washing, for example, dirt and abrasion. EN 471 HIGH VISIBILITY The garment complies with the requirements for ample visibility in exposed situations under all sorts of lighting conditions. The upper number placed to the right of the EN label indicates the class of protection for the garment and the lower number specifies reflective material. Reflective and fluorescent materials shall be equally distributed on each garments front and back with a maximum deviation of +/- 10 %. Minimum area per m2 garment: Fabric Class 3 Class 2 Class 1 Fluorescent material 0,80 0,50 0,14 Reflective material 0,20 0,13 0,10

HI-VIS

SOLID CRAFTSMANSHIP.

23712 CRAFTSMANS VEST EN ISO 20471 CL.2 Rugged craftsman vest with four Cordura速 reinforced holster pockets, ID-pocket, pen pocket, D-ring and buttons for attachment of tools, keys etc. hook and loop fastener for tool holders, belt straps, anatomically placed padding over the shoulders for added comfort when carrying heavy stuff in the pockets. Adjustable chest width and airy mesh in back. Orange 23712 5 Size: S-4XL

Yellow 23712 6

QUALITY: 85 % polyester/15 % cotton, 280 g/m2 twill. Cordura速 reinforcement.

37818 4 SAFETY VEST EN 471 CL.2

8000370 WARNING VEST EN 471 CL.3

Sturdy vest with zipper closure, front pocket with flap and ID-pocket.

Two-toned vest with zipper and side pocket.

Yellow 37818 4 Size: S/M, L/XL, 2XL/3XL, 4XL

Yellow/orange 8000370 Size: L, XL

QUALITY: 100 % polyester.

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: 100 % polyester.

HI-VIS

SOLID CRAFTSMANSHIP.

43512 PARKAS EN 471 CL.3

43712 PILOTJACKET EN 471 CL.3

Padded, detatchable/adjustable hood, plenty of internal and external pockets, zipper for under arm ventilation, drawcord adjuster at waist and bottom hem.

Padded, expansion fold in back, detatchable/adjustable hood, plenty of internal and external pockets, zipper for under arm ventilation, snow cuff with adjustable wrist, elasticated front and waist and extended back for enhanced protection in all working positions.

Orange/navy 43512 5 Yellow/black 43512 6 Size: XS–4XL

QUALITY: 85 % polyester/ 15 % cotton, 295 g/m². Contrast fabric: 50 % polyester, 50 % cotton, 300 g/m². Padding: 160 g/m².

Orange/navy 43712 5 Yellow/black 43712 6 Size: XS–5XL

QUALITY: 85 % polyester/ 15 % cotton, 295 g/m². Contrast fabric: 50 % polyester, 50 % cotton, 300 g/m². Padding: 160 g/m².

41512 VINTERCOVERALL EN 471 CL.3

44012 WINTER TROUSERS EN 471 CL.1

Padded, detatchable and adjustable hood, expansion fold in back, under arm ventilation, chest pockets, inner pocket, pen pocket, sleeve pocket, slash pockets, access pockets, back pockets, thigh pocket, phone pocket, ruler pocket and outside kneepad pockets. Full length two-way zipper in leg.

Padded, detatchable braces, slash pockets in front, back pockets, inner kneepad pockets, phone pocket, ruler pocket, zipper and adjuster in bottom hem.

Orange/navy 41512 5 Yellow/black 41512 6 Size: XS–4XL

QUALITY: 85 % polyester/ 15 % cotton, 295 g/m². Contrast fabric: 50 % polyester, 50 % cotton, 300 g/m². Padding: Body: 160 g/m², sleeves/legs: 140 g/m².

Navy/orange 44012 5 Black/yellow 44012 6 Size: XS–4XL

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: 85 % polyester/ 15 % cotton, 295 g/m². Contrast fabric: 50 % polyesterv, 50 % cotton, 300 g/m². Padding: 140 g/m².

HI-VIS

SOLID CRAFTSMANSHIP.

13713 6 UTILITY PARKAS WINTER EN 471 CL.3 Detachable hood with zipper, hood with elastic drawstrings and three-way adjustment for optimal fit, with or without a helmet. Pockets with flap with snaps and zipper closure. Inside storm pocket with zip, ID-pocket in left front pocket, reflective trim around chest, sleeves and shoulders. Yellow/black 13713 6 Size: XS–4XL

QUALITY: 100 % polyester 195 g/m² Polymax® membrane. Water column: 12 000 mm. Breathability: 7 000 g/m² / 24 hours. Padding: Body: 160 g/m². Sleeves: 140 g/m².

NEW COLOUR

13813 6 UTILITY BIBPANT WINTER EN 471 CL.1

13913 UTILITY JACKET WINTER EN ISO 20471 CL.3

Detatchable, elastic braces, elasticated waist, leg pocket has flap with hook and loop closure and drainage hole, side zipper pockets, inner kneepad pockets adapted to 29 cm kneepads, zip at cuffs and reflective trim around legs.

Windproof, waterproof, breathable and padded. Detachable hood with zipper, elastic drawstrings and three-way adjustment for optimal fit, with or without a helmet. Pockets with flap with snaps and zipper closure. Storm pocket with zip, arm pocket with water resistant zipper, ID-pocket, reflective trim around chest, sleeves and shoulders.

Black/yellow 13813 6 Size: XS–4XL

QUALITY: 100 % polyester 195 g/m² Polymax® membrane. Water column: 12 000 mm. Breathability: 7 000 g/m² / 24 hours. Padding: 60 g/m².

Yellow/black 13913 6 Orange/black 13913 5 Size: S–4XL

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: 100 % polyester 195 g/m² Polymax® membrane. Water column: 12 000 mm. Breathability: 7 000 g/m² / 24 hours. Padding: Body: 160 g/m². Sleeves: 140 g/m².

HI-VIS

SOLID CRAFTSMANSHIP.

13313 UTILITY JACKET EN 471 CL.3 Detachable hood with zipper; hood with drawcord adjusters and hook and loop adjustments for optimum protection and fit. Double front flaps to prevent wind and moisture penetration, waterproof zipper on chest pocket and pockets on lower backside, inner storm pocket with zipper closure, ID pocket in left front pocket, reflective trim across chest, sleeves and shoulders. Orange/navy 13313 5 Yellow/black 13313 6 Size: XS–3XL

QUALITY: 100 % polyester, Polymax® membrane 200 g/m². Water column: 12 000 mm. Breathability 8 000 g/m²/24 hours.

13613 UTILITY BIBPANT EN 471 CL.2 Elastic shoulder straps, elastic at waist on sides, cell phone pocket with hook and loop flaps on chest, back pockets with flaps and hook and loop closure, waterproof zippers on slash pockets, inner kneepad pockets, zipper with flap in leg closure, reflective trim on leg. Orange/navy 13613 5 Yellow/black 13613 6 Size: XS–3XL

QUALITY: 100 % polyester, Polymax® membrane 200 g/m². Water column: 12 000 mm. Breathability 8 000 g/m²/24 hours.

20612 6 CHILDREN’S COVERALL (LIGHT VISIBILITY)

31512 6 SNOW-VIS (LIGHT VISIBILITY)

Expansion fold in back, under arm ventilation, chest pockets, pen pocket, sleeve pocket, slash pockets, back pockets, thigh pocket, phone pocket and ruler pocket. Stylish reflective figure on zipper.

Safe and visible for the kids! Detatchable hood, elasticated band to the boots. 50 mm reflective trim around sleeves and legs.

Yellow/black 20612 6 Size: 4–16 years

QUALITY: 85 % polyester/ 15 % cotton, 295 g/m². Contrast fabric: 65 % polyester, 35 % cotton, 310 g/m².

Yellow/black 31512 6 Size: 4-14 years

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: 200g 300D Oxford nylon. Contrast fabric: 260g/m² 600D Oxford nylon. Padding: Hood, sleeves and legs: 140 g/m². Body: 160 g/m². Water column: 3000 mm.

MULTINORM

30810 6 KRAFLA JACKET CL. 3

NEW

Expected in stock March. Yellow/grey 30810 6 Size: XSâ&#x20AC;&#x201C;4XL

QUALITY: 51 % PPAN-flame retardant, 43 % lyocell, 5 % para-aramid, 1% static controlTM +PU-film 275g/m2. Water column: 18.000 mm. Flame retardant reflecitve bands.

Detatchable and three-way adjustable hood for optimal fit.

Flame retardant, visible and water proof. Water column: 18 000 mm!

Comfortable and protective collar.

Retractable ID-pocket. Pocket with zipper.

Inner pocket with zipper. Space for profiling your company. Ventilation.

Front flap, with hook and loop closure. YKK zipper.

Inside tablet pocket with hook and loop closure.

Handwarmer pockets with soft lining.

hook and loop adjustment. Elastic drawstring adjuster.

Soft and comfortable lining.

EN ISO 11612 Antiflame (class A1, A2, B1, C1:2008), EN 1149-5:2008, EN 1149-3:2004 Electrostatic properties, IEC 61482-1-2 Electric Arc (class 1), EN 343 class 3:2004 and EN ISO 20471 Hi-Vis class 3. The jacket in size XS and S has a slightly different design in order to achieve the highest visibility class.

ANTIFLAME We have been treating our clothes badly. We have ignited them, welded them, thrown hot coals at them, subjected them to explosions and arc flashes â&#x20AC;&#x201C; basically, given them a baptism of fire. Not because we hate them, but because we knew the experience would make them stronger. So you can crack on with your work, safe in the knowledge that our Antiflame range will protect you.

MULTINORM

SOLID CRAFTSMANSHIP.

30811 6 KRAFLA TROUSERS EN ISO 20471 CL. 1

NEW

Two side pockets, tool pocket and spacious cargo pocket. Elastic at waist, belt loops and detatchable braces. Reinforcement at inside leg and zipper at leg ends. Light and comfortable lining. Inner kneepad pockets for 20 or 29 cm kneepads. Expected in stock March. Grey/yellow 30811 6 Size: XS–4XL

QUALITY: 51 % PPAN-flame retardant, 43 % lyocell, 5 % para-aramid, 1% static controlTM +PU-film 275g/m2. Water column: 18.000 mm.Flame retardant reflecitve bands. Certified to: EN ISO 11612 Antiflame (class A1, A2, B1, C1:2008), EN 1149-5:2008, EN 1149-3:2004 Electrostatic properties, IEC 61482-1-2 Electric Arc (class 1), EN 343 class 3:2004 and EN ISO 20471 Hi-Vis class 1.

20216 6 COVERALL EN ISO 20471 CL. 3 Expansion in back, chest pockets, the left one with hidden cell phone pocket and the right one with ID-pocket. Front pockets and access opening, back pockets with hook and loop flap, thigh pocket with hook and loop flap on the left side and ruler pocket on the right side, elasticated waist and hook and loop adjuster at cuff. Inner kneepad pockets for 29 cm kneepads. Yellow/grey 20216 6 Size: XS–4XL

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: 79 % cotton, 20 % polyester, 1 % carbon. Sto-Nor flame retardant reflective bands. Certified to: EN ISO 11612 Antiflame (class A1, B1, C1, E3, F1), EN 1149-5 Electrostatic properties, EN ISO 16611 Welding (class 1 A1), IEC 61482-1-2 Electric Arc (class 1), EN ISO 20471 class 3.

MULTINORM

SOLID CRAFTSMANSHIP.

23116 6 WORK JACKET EN ISO 20471 CL. 2

54016 6 WINTER JACKET EN ISO 20471 CL.2

Expansion in back, chest pockets, the left one with hidden cell phone pocket and the right with ID-pocket, front pockets and sleeve pocket with hook and loop flap, hook and loop adjuster at wrist.

Expansion in back, detachable hood with adjusters, four external pockets with hook and loop closure, inner pocket on the left side. Hook and loop adjuster at cuffs and extended back.

Yellow/grey 23116 6 Size: XS–4XL

Yellow/grey 54016 6 Size: S–3XL

QUALITY: 79 % cotton, 20 % polyester, 1 % carbon. Lining: 100% cotton 350g/m2. Loxy flame reflective bands. Certified to: EN ISO 11612 Antiflame (class A1, B1, C1, F1), EN 11149-5 Electrostatic properties, EN ISO 16611 Welding (class 1 A1), IEC 61482-1-2 Electric Arc (class 1), EN ISO 20471 class 2.

21716 6 WORK TROUSERS EN ISO 20471 CL.1

21816 6 CRAFTSMAN TROUSERS EN ISO 20471 CL.1

Slash pockets, back pocket with hook and loop flap, thigh pocket with hook and loop flap on the left side, ruler pocket on the right side. Inner kneepad pockets for 29 cm kneepads.

Slash pockets and holster pockets, back pocket with hook and loop flap, thigh pocket with hook and loop flap on the left side, ruler pocket on the right side, inner kneepad pockets for 29 cm kneepads.

Grey/yellow 21716 6 Size: 44–64

Grey/yellow 21816 6 Size: 46-64

SYNFIBER PRODUCT CATALOGUE 2016

SOLID CRAFTSMANSHIP.

MULTINORM

= EN ISO 20471 CL. 3.

JACKET AND TROUSERS ARE CERTIFIED AS SET:

54116 6 WINTER TROUSERS EN ISO 20471 CL.1

51516 6 WINTER COVERALL EN ISO 20471 CL.3

Detachable elastic braces, hidden button, side pockets, back pockets with flap, ruler pocket, thigh pocket, knee pad pockets for 29 cm knee pads, zipper in leg opening.

Expansion in back, elasticated waist, ID-card pocket on right chest, detachable hood with adjusters, four outside pockets with hook and loop closure, inner pocket at left chest, hook and loop cuffs and zipper opening in leg opening. Knee pad pockets for 29 cm knee pads.

Grey/yellow 54116 6 Size: S–3XL

Grey/yellow 51516 6 Size: S–3XL

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: 79 % cotton, 20 % polyester, 1 % carbon. Lining 100% cotton 350g/m2. Loxy flame reflective bands. Certified to: EN ISO 11612 Antiflame (class A1, B1, C1, F1), EN 11149-5 Electrostatic properties, EN ISO 16611 Welding (class 1 A1), IEC 61482-1-2 Electric Arc (class 1), EN ISO 20471 class 3.

MULTINORM

SOLID CRAFTSMANSHIP.

12212 6 WORK JACKET Expansion in back, chest pockets, the left one with hidden cell phone pocket and the right with ID-pocket, front pockets and sleeve pocket with Velcro flap, hook and loop adjuster at cuffs and extended back. Grey 12212 6 Size: S–3XL

QUALITY: 99 % cotton/1 % carbon (antistatic), 350g/m². Certified to: EN ISO 11612 Antiflame (class A1,B1,C1, E3,F1), EN 1149-5 Electrostatic properties, EN ISO 11611 Welding (class 1 A1) and IEC 61482-12, Electric Arc class 1.

12210 6 COVERALL Expansion in back, elasticated waist, hook and loop adjuster at cuffs. Chest pockets, cell phone pocket, ID-pocket, sleeve pocket, slit pockets and access opening, back pockets with flap and hook and loop, thigh pocket and ruler pocket. Outer kneepad pockets adapted to 29 cm kneepads. Grey 12210 6 Size: XS–3XL

12211 6 WORK TROUSERS 90503 7 HOLSTER POCKETS Holster pockets for attatchment to belt, room for tools, nails etc. Flame retardant, certified material. Pair. Grey 90503 7 Size: One size

QUALITY: TenCate Tecapro BG9035, 79% cotton 4/1 satin, 20% polyester, 1% static-control, 350 g/m², 99 % cotton/1 % carbon (antistatic), 350g/m².

Slash pockets, back pocket and thigh pocket with hook and loop flap, ruler pocket on the right side. Kneepad pockets adapted to 29 cm kneepads. Grey 12211 6 Size: 44–64

SYNFIBER PRODUCT CATALOGUE 2016

FLAMMEHEMMENDE

KEY TO THE SYMBOLS EN ISO 20471 HIGH VISIBILITY The symbol is simplified and the number to the right explains the certified class. Jacket and trousers can achieve a higher class if certfied as set. Jacket class 2 and trousers class 1 can for exampel achieve class 3. The requirements for colour fastness are also stricter: Products must undergo tests and be approved for colour fastness for a minimum of five wash/dry. Product lifecycle and visibility degree may be limited by several factors other than washing, for example, dirt and abrasion. EN ISO 11612 FLAME-RETARDANT/ ANTIFLAME Work clothing which complies with requirements in this European standard, and shall protect against short-term exposure to flames and minimum one type of heat. Synfiber’s safety clothing provides the following protection: A, B1, C1. Some garments also have E3 and F1. EN 1149 ELECTROSTATIC PROPERTIES The garment is certified in compliance with EN 1149-5, which specifies the requirements concerning product standards for anti-static garments. The garments reduce the risk of explosions due to their anti-static features. This fabric is certified in compliance with EN 1149-3. However, contact with the ground must be maintained and anti-static footwear must be used. The anti-static features of the garments are achieved through inter-weaving of the fabric. The garments therefore have permanent anti-static features. EN 11611 WELDING This garment complies with the requirements in CE standard EN11611 concerning protective clothing for welding and heat work. Protects against sparks and embers. Pockets, buttons and zippers are hidden and the fabric is flame retardant, which means that the fabric is damaged by direct exposure to heat and flames, but the fabric does not catch fire once the heat source is removed. EN 61482 ELECTRIC ARC Work clothing tested for protection against electric arc. For personnel who work in proximity to high-voltage-conducting facilities where there is risk of arc electric explosions. The temperature of an electric arc can reach thousands of degrees, and it is therefore important that garments are flame proof. Fabric in the flame retardant garments are tested for protection against electric arc in compliance with EN 61482-1-2. Unlined garment class 1 (4kA), lined garment class 2 (7kA). Code A1: Surface test A2:Test from the edge of the fabric

Area Limited flame spread

Explanation IISO 15025: Average afterglow time and afterflame time shall be maximum 2 sec. The seams are also tested.

B1: 4- <10 sec B2: 10- <20 sec B3: min. 20 sec

Convective heat

ISO 9151: Single or multilayer garments and/or garment combinations. Convective heat occurs when the air near the heat source is heated.

C1: 7- <20 sec C2: 20- <50 sec C3: 50- <95 sec C4: min. 95 sec E1: 60g-<.120 g E2:120 g–<.200 g E3: min. 200 g F1: 5- <10 sec F2: 10- <15 sec F3: min. 15 sec

Radiant heat

ISO 6942: Single or multlayer garments and/or clothing assemblies. Radiant heat is beams passing through the air as invisible light. When the rays hit an object, it becomes hot.

Molten iron splash

ISO 9185: Level of protection against molten iron. Indicates how many grams of molten iron splash the garments protect against.

Contact heat

ISO 12127: Level of protection against contact heat.Indicates number of seconds you are protected when in contact with a heat source at 250 °C.

WORKWEAR Soft on the inside. Tough on the outside.

HANDYHUNK

36519 9 COREHUNK CRAFTSMAN TROUSERS Black: 36519 9 Size: 44–64

QUALITY: Starmaker material is lightweight and breathable featuring mechanical stretch. 65% cotton/ 35% polyester. 290 g/m2. Cordura® reinforcements, 235 g/m2. Hook and loop fasterners for tool holders at both sides of waist.

Extremely durable craftsman trousers featuring light stretch.

Cordura® reinforced holster pocket for durability.

Pocket for ID-card. Can be folded up and fastened on the back of the holster pocket.

Spacious, detatchable holster pockets (YKK Strap 8 Multi adapter system). Loop ties for tools.

Thigh pocket and cell phone pocket. Ruler pocket with loose bottom for added flexibility, knife and pen pocket.

Outer Cordura® kneepad pockets for kneepads 29 cm length.

Smart lower leg pocket for easy access when working in a kneeling posture.

HANDYHUNK HandyHunk is top-of-the-range, with all of the functionality you would expect. The test regime is so thorough, it’s not just been tested in your daily work, it’s also been tested on women. A select group of tradesmen were set to work – hammering while kneeling, sawing with one foot resting on a beam, standing on top of a ladder, grovelling in a drain – observed by a panel of women. It turns out that, when wearing HandyHunk, the men were extra Handy and extra Hunk. Apparently.

HANDYHUNK

SOLID CRAFTSMANSHIP.

31010 9 CRAFTSMAN TROUSERS

NEW

Covered trouser button, slash pockets and spacious holster pockets, ID-pocket, back pockets, thigh pocket with flap and cell phone pocket, ruler pocket, tool loops, sturdy belt loops, hook and loop fastener for tool holders, inner kneepad pockets for 20 or 29 cm kneepads. 5 cm bottom hem for a handy extension of leg length. Expected in stock July. Black 31010 9 Size: 44–64

STRETCH

31011 9 WORK TROUSERS

QUALITY: Elastic canvas, 97% cotton/ 3 % Lycra, 260 g/m². Contrast fabric: 100 % nylon, 500D*500D/88T; 200 mm w/p. Slightly impregnated for better protection.

NEW

Covered trouser button, slash pockets, back pockets, thigh pocket with flap, ruler pocket, inner kneepad pockets for 20 or 29 cm kneepads. 5 cm bottom hem for a handy extension of leg length. Expected in stock July.

36119 9 CROPPED TROUSERS

Black 31011 9 Size: 44–64

Black 36119 9 Size: 44–64

STRETCH

QUALITY: Elastic canvas, 97% cotton/ 3 % Lycra, 260 g/m². Contrast fabric: 100 % nylon, 500D*500D/88T; 200 mm w/p. Slightly impregnated for better protection.

HandyHunk craftsman trousers in a cropped version.

STRETCH

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: Elastic canvas, 97% cotton/ 3 % Lycra, 260 g/m². Contrast fabric: 100 % nylon, 500D*500D/88T; 200 mm w/p. Slightly impregnated for better protection.

HANDYHUNK

SOLID CRAFTSMANSHIP.

36420 9 COREHUNK CRAFTSMAN VEST

35920 YUKON FLEECE JACKET

Extremely durable craftsman vest of Cordura®. Anatomically placed padding over the shoulders for extra comfort when carrying heavy stuff in the pockets, pocket for ID-card, nail pockets, tool pockets and cell phone pocket. Airy mesh in back, adjustable chest width and detatchable holster pockets on the back (YKK Strap 8 Multi adapter system).

Two side pockets with zip and inner pocket with hook and loop. Contrast on shoulders are bonded with fleece.

Black 36420 9 Size: S-4XL

Black/orange 35920 9 Size: S-4XL

QUALITY: Cordura®, 265 g/m2, mesh, 390 g/m2.

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: 35920 9: Microfiber fleece, 100 % polyester, 300 g/m². Contrast fabric: Polyester twill 355 g/m².

HANDYHUNK

SOLID CRAFTSMANSHIP.

36319 9 CRAFTSMAN JACKET

36819 9 CRAFTSMAN WINTER JACKET

Convenient and comfortable jacket for crafmsmen. Chest pockets, ID-pocket, cell phone pocket, front pockets, hook and loop adjustment on cuffs and bottom hem.

Padded winter jacket in a heavy quality featuring stretch. Soft fleece lining inside the collar, side pockets with zippers and comfortable fleece tricot lining. Inside pocket with zipper. Hook and loop adjustment hem and cuffs.

Black 36319 9 Size: S-4XL

STRETCH

QUALITY: Elastic canvas, 97% cotton/ 3 % Lycra, 260 g/m². Contrast fabric: 100 % nylon, 500D*500D/88T; 200 mm w/p. Textured nylon on elbows and pockets. Slightly imprainated for better protection.

Black 36819 9 Size: S-4XL

QUALITY: 97 % cotton/3 % spandex, 100 g/m². Nylon lining and 100 g/m² padding.

STRETCH

SYNFIBER PRODUCT CATALOGUE 2016

PERFECT

25219 CRAFTSMAN TROUSERS Grey 25219 6 Black 25219 9 Size: 44-64

QUALITY: 65% polyester/ 35 % cotton, 320 g/mÂ˛. Safety seam for enhanced durability.

Hook and loop fasteners for tool holders at both sides. Back pockets with flap. Craftsman trousers with perfect fit. Loop ties for tools Side pockets and holster pockets. Pocket for ID-card.

Thigh pocket. Ruler pocket with knife sheath button and pen pocket.

Re-inforced, outer knepad pockets for 29 cm kneepads.

5 cm extra bottom hem for a handy extension of leg length.

PERFECT, COMFORT & INDUSTRY Your knees take a hammering. You are attacked by sharp objects. You squeeze under sinks. You lift heavy loads. You work through the pain. Our workwear has to cope with a lot. Just like you. We have put pockets on the lower leg, on the back and on the knees, and we have reinforced the seams, from the shoulders to the toes. Our clothes have been tested on a typical working day, but even though they are tough on the outside, they are soft on the inside. Just like you.

PERFECT

SOLID CRAFTSMANSHIP.

GLOVE COMPARTMENT

22119 WORK JACKET Expansion at back, two chest pockets with flaps incl. slot for pen in right flap, integrated ID-pocket in right chest pocket. Pushbutton adjustment on cuffs and bottom hem. Royal blue/black 22119 3 Grey/black 22119 6 Size: S-4XL

QUALITY: 65% polyester/ 35 % cotton, 320 g/m². Safety seam for enhanced durability.

21219 WORK TROUSERS

20219 COVERALL

Excellent fit! Side pockets, thigh pocket and back pockets with flaps. Ruler pocket incl. button for knife sheath and pen pocket, inner kneepad pockets.

Excellent fit! Side pockets, thigh pocket and back pockets with flaps. Ruler pocket incl. button for knife sheath and pen pocket, inner kneepad pockets. Pushbutton adjustment on cuffs.

Royal blue 21219 3 Grey 21219 6 Black 21219 9 Size: 44-64

Royal blue/black 20219 3 Grey/black 20219 6 Size: S-3XL

QUALITY: 65% polyester/ 35 % cotton, 320 g/m². Safety seam for enhanced durability.

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: 65% polyester/ 35 % cotton, 320 g/m². Safety seam for enhanced durability.

COMFORT & INDUSTRY

SOLID CRAFTSMANSHIP.

34419 CRAFTSMAN TROUSERS COMFORT

34219 9 WORK JACKET INDUSTRY

Slit pockets, Cordura® holster pockets, back pockets, thigh pocket incl. reflective trim, ID-pocket, ruler pocket, loop ties for tools, sturdy belt loops and hook and loop fasteners for tool holders. Cordura® knee pad pockets for 29 cm knee pads. 5 cm extra bottom hem for a handy extension of leg length.

Expansion at shoulders, two chest pockets with flaps, incl. holder for pen in right flap, integrated ID-pocket in right chest pocket. Pushbutton adjustment on cuffs and bottom hem, reflective trim for increased visibility.

Grey/black 34419 6 Black/white 34419 0 Size: 46-64

QUALITY: 100 % cotton, 300 g/m². Reinforcement:; Cordura® 320 g/m2.

Black 34219 9 Size: S-3XL

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: 100 % cotton, 300 g/m². Flame retardant reflective trim.

INDUSTRY

SOLID CRAFTSMANSHIP.

34319 9 WORK TROUSERS INDUSTRY

34119 9 COVERALL INDUSTRY

Based on the perfect fit of the Perfect trousers. Side pockets, thigh pocket and back pockets with flaps, ruler pocket, inside knepad pockets.

Expansion at shoulders, two chest pockets with flaps incl. place for pen in right flap, integrated ID-pocket in right chest pocket, side pockets, thigh pocket and back pockets with flaps, ruler pocket incl. button for knife sheath and pen pocket, inside kneepad pockets, elasticated waist and pushbutton adjustment on wrists. Reflective trim for increased visibility.

Black 34319 9 Size: 44-64

QUALITY: 100 % cotton, 300 g/m². Flame retardant reflective trim.

Black 34119 9 Size: S-3XL

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: 100 % cotton, 300 g/m². Flame retardant reflective trim.

BASE

SOLID CRAFTSMANSHIP.

12119 9 MEN’S TROUSERS Men’s trousers with good fit. Front pockets, back pockets, thigh pocket with zipper and cell phone pocket. Black 12119 9 Size: 44–64

QUALITY: 65% polyester/ 35 % cotton, 245 g/m². The fabric is woven with a higher proportion of cotton on the inside, giving increased comfort. A higher proportion of polyester on the surface enhances durability. Double stitching.

11619 WORK TROUSERS

12039 9 WOMEN’S TROUSERS

Elasticated waist , slit pockets, back pockets, thigh pocket, ruler pocket, cell phone pocket, pen pocket, outer kneepad pockets for 20 cm kneepads.

Front pockets, back pockets and spacious thigh pocket.

Navy 11619 1 Royal blue 11619 3 Grey 11619 6 Rød 11619 8 Black 11619 9 Size: 44–64

Black 12039 9 Size: 34–52

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: 665% polyester/ 35 % cotton, 245 g/m². The fabric is woven with a higher proportion of cotton on the inside, giving increased comfort. A higher proportion of polyester on the surface enhances durability. Double stitching.

BASE

SOLID CRAFTSMANSHIP.

12019 WORK JACKET

11219 9 WORK SHORTS

Expansion in back, two chest pockets with flaps, ID-pocket, two side pockets, inner pocket with zipper, cell phone pocket, pen pocket, under arm ventilation, pushbutton adjustment at cuffs, hook and loop adjustment in bottom hem.

Pockets in front and back, thigh pocket and cell phone pocket.

Royal blue/navy 12019 3 Red/black 12019 8 Black/grey 12019 9 Size: XS–4XL Red/black: XS–3XL

Black 11219 9 Size: S–3XL

10019 COVERALL

10019 7 SEAMARK COVERALL (LIGHT VISIBILITY)

Expansion in back, two chest pockets with flaps, ID-pocket, two side pockets, access to trouser pockets, inner pocket, cell phone pocket, pen pocket, under arm ventilation, ruler pocket, outer kneepad pockets for 20 cm kneepads, thigh pocket. Elasticated waistband and pushbutton adjustment at cuffs.

Expansion in back, two chest pockets with flaps, ID-pocket in left chest pocket, side pockets, access opening to trouser pockets, inner pocket, cell phone pocket, pen pocket, under arm ventilation, ruler pocket, outer kneepad pockets for 20 cm kneepads, thigh pocket. Zipper in leg closure, reflective trim. Elasticated waistband and pushbutton adjustment at cuffs.

Royal blue/navy 10019 3 Rød/black 10019 8 Black/grey 10019 9 Size: XS–4XL

Red/yellow 10019 7 Size: XS–3XL

SYNFIBER PRODUCT CATALOGUE 2016

WINTER CLOTHING Tested in the extremes of the Nordic winter.

WINTER CLOTHING

41412 7 BOATSMANN COVERALL (EN 343/LIGHT VISIBILITY)

NEW

Expected in stock March. Rød/Yellow 41412 7 Size: XS–4XL

QUALITY: Polyester Oxford, 5000 mm water column and 5000 G/M/24H breathability. Taped seams. Padding: Sleeves: 140 g/m². Body: 160 g/m².

Coverall customized for work on boats and docks. Reflective bands provides good visibility in all positions.

Detatchable hood with elastic drawstrings and three-way adjustment for optimal fit. Strap for lifejacket on chest and neck.

ID-pocket in right chest pocket.

Zipper for under arm ventilation.

Sturdy belt with side release buckle..

Taped seams.

Loop in pocket for dead man’s switch or keys.

Full length twoway zipper.

Sto-nor reflective bands on legs, in front, back and over shoulders.

EN 343 3-1

WINTER CLOTHING It’s not hard to keep yourself warm in winter – it’s just a case of wearing loads of clothes. The problem is when you then have to work under such conditions. Our clothes have been tested in all versions of the Nordic winter: slush, dry snow, crusty snow, warm sun, sub-zero temperatures, sleet, coastal snow, inland snow, and everything in between. They have also been tested by tradesmen, working in all these conditions. After all, if you can’t keep warm and move about at the same time, you may as well give up and go home.

SNOWLINE

SOLID CRAFTSMANSHIP.

43919 PILOT JACKET

43519 POLAR PARKAS

Padded, fleece lined collar, two chest and side pockets with flap and zipper. Inner pockets with zipper, sleeve pocket with flap, zipper for under arm ventilation, adjustable snow cuff, prolonged back for enhanced protection in all working positions. Reflective details.

Padded, fleece lined collar, detachable, adjustable hood, two chest and side pockets with flap and zipper. Inner pockets with zipper, sleeve pocket with flap, zipper for under arm ventilation, adjustable snow cuff, drawcord adjuster at waist and bottom hem. Reflective details.

Grey 43919 2 Black 43919 9 Size: XS-5XL

QUALITY: Wind- and water repellent 300 D Oxford polyester, PU-coated, 165g/m². Padding: 180 g/m². 1 000 mm water column.

Grey 43519 2 Black 43519 9 Black/red 43519 4 Size: XS–4XL Grey: XS–3XL

QUALITY: Wind- and water repellent 300 D Oxford polyester, PU-coated, 165g/m². Padding: 180 g/m². 1 000 mm water column.

41519 ARCTIC WINTER COVERALL

31219 3 COAST WINTER COVERALL

Padded, fleece lined collar, detachable hood with snap fasteners for safety, two chest and side pockets with flap and zipper. Inner pockets with zipper, sleeve pocket with flap, pen pocket, elasticated and adjustable waist, zipper for under arm ventilation, snow cuff with hook and loop adjuster, ruler pocket, inner kneepad pockets, full length two-way zipper in leg, reflective details.

Durable wind resistant and water repellent fabric. Padded, removable hood, internal and external pockets with closure, elastic at waist, belt, zipper for under arm ventilation, snow cuff with hook and loop adjuster, zip in leg end, reflective seam and trim.

Grey 41519 2 Black 41519 9 Size: XS–3XL

Navy/royal blue 31219 3 Size: XS–2XL

QUALITY: Wind- and water repellent 300 D Oxford polyester, PU-coated, 165g/m². Padding: 160 g/m². 1 000 mm water column.

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: Polyester 300 D Oxford 160 g/m2. Padding: Body: 180 g/m2, sleeves/legs: 160 g/m2. 2 000 mm water column.

SNOWLINE/WINTER CLOTHING

SOLID CRAFTSMANSHIP.

45119 SNOWLINE TROUSERS

33319 7 RETRO PILOT JACKET

Straight model with zipper in leg closure. Thigh pocket on left side with flap, thigh pocket on right side with room for ruler, pen, etc., back pockets on right side with flap, wide belt loops and reflective seam around zipper opening on leg. Inner kneepad pockets.

Two chest pockets with zipper, keyring, side pockets, inner pockets, phone pocket, sleeve pocket with zipper, pen pocket, reflective seam. Pile fleece in collar and body, padded sleeves.

Grey 45119 6 Black 45119 9 Size: 46–62. Grey: 48-62

QUALITY: Wind- and water repellent 300 D Oxford polyester, PU-coated, 165g/m². Padding: 160 g/m². 1 000 mm water column

Black 33319 7 Size: XS–4XL

QUALITY: 100 % polyester beavernylon 210 g/m².

32718 9 THERMO JACKET

36819 9 HANDYHUNK WINTER JACKET

The ultimate warm jacket for cold days. Long back and thumb holes on cuffs.

Padded winter jacket in a heavy quality featuring stretch. Side pockets with zippers and comfortable fleece tricot lining. Inside pocket with zipper. Adjustment option in bottom hem and adjustable hook and loop cuffs. Soft fleece lining in neck.

Black 32718 9 Size: S–3XL

QUALITY: 100 % polyester sheep pile, 380 g/m2.

Black 36819 9 Size: S-4XL

SYNFIBER PRODUCT CATALOGUE 2016

STRETCH

QUALITY: 97 % cotton/3 % spandex, 100 g/m². Nylon lining. Padding: 100 g/m².

FINNMARK/WINTER CLOTHING

SOLID CRAFTSMANSHIP.

44919 9 ALTA WINTER JACKET

44519 9 TANA PARKAS

Three outer and two inner pockets, access opening for headset in inner pocket, reflective trim on wrist and back. Elastic drawstring at bottom hem.

Four inner and outer pockets, access opening for headset in inner pocket, under arm ventilation, reflective trim on wrist and back. Detatchable hood, fastened with pushbuttons.

Black 44919 9 Size: XS–4XL

Black 44519 9 Size: XS–4XL

QUALITY: 20D nylon Taslan outer 165g/m², wind- and waterproof, water column 5,000 mm. Breathability 5,000 g/m² 24h. Padded. The garments have passed cold testing of -18�c.

45919 9 NEIDEN TROUSERS

35931 9 SVALBARD PARKAS

Stylish winter trousers with chic cut and nice details. Front pockets with zipper, phone pocket with zipper, back pockets, one with zipper and one with flap and drainage hole, side pocket with two flaps and drainage hole, inner kneepad pockets, side opening with zipper in leg, waterproof zippers, reflective trim.

Warm parkas in durable wind and water resistant fabric. Functional pockets, including inside tablet pocket and ID-pocket. Detachable hood with faux fur edge.

Black 45919 9 Size: 46–62

Black 35931 9 Size: XS–3XL

QUALITY: 100 % polyester, PU coated, hollow fiber and polyester taffeta lining.

QUALITY: 20D nylon Taslan outer 165g/m², wind- and waterproof, water column 5,000 mm. Breathability 5,000 g/m² 24h. Padded. The garments have passed cold testing of -18�c.

SYNFIBER PRODUCT CATALOGUE 2016

UNDERWEAR

SOLID CRAFTSMANSHIP.

53591 WOOL TERRY UPPERS

3281 PERFORMANCE UNDERWEAR UPPERS

Really warm underwear and an absolute favorite for those who work outdoors. The loops on the inside of the garments provide much air and thus fantastic insulation. Polo with zipper at neck.

Technical underwear keeping moisture away from skin and makes sure you stay dry and comfortable, even during physically strenuous work. Polo has 3/4 zipper and a protective flap that prevents chafing against the chin.

Black Polo 535911 Black Jersey 535912 Size: S–2XL

QUALITY: Woolterry, 65 % merino wool/20 % polyester/15 % polyamide.

Black Polo 32814 9 Black Jersey 32816 9 Black T-shirt 32817 9 Size: S–3XL

QUALITY: 100 % spun polyester ”drop needle”, 185 g/m². Polo with spandex in collar.

535913 WOOL TERRY LONGS

32815 9 PERFORMANCE UNDERWEAR LONGS

Warm longs without fly. The loops on the inside gives a lot of air and very good insulation.

Technical longs keeping moisture away from skin and makes sure you stay dry and comfortable, even during physically strenuous work. Without fly.

Black 535913 Size: S–2XL

QUALITY: Woolterry, 65 % merino wool/20 % polyester/15 % polyamide.

Black 32815 9 Size: S–3XL

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: 100 % spun polyester ”drop needle”, 185 g/m².

ACCESSORIES

SOLID CRAFTSMANSHIP.

35320 9 TRAPPER WINTER HAT

35319 9 FLEECE BEANIE

Warm, faux fur lined winter cap. Reflective logo on the back.

Soft and light beanie, microfiber fleece. Embroidered Synfiber-symbol.

Black 35320 9 Size: One size

QUALITY: Nylon outer, polyester fur faux lining.

Black 35319 9 Size: S-XL

QUALITY: 100 % polyester, 165 g/m².

35321 9 WOOL BEANIE

35219 9 WOOL BEANIE

Thick and warm ”Commando” beanie. Ribbed.

Warm wool beanie incl Synfiber-logo and reflective details. Soft Polycolon® lining.

Black 35321 9 Size: One size

QUALITY: 100 % merino wool.

Black 35219 9 Size: M-L

QUALITY: 50 % wool/50 % acrylic. Polycolon® lining.

35018 8 WOOLEN SOCKS

35018 6 WOOL SOCKS

35018 7 TECHNICAL SOCKS

Warm woolen socks! 2-pack.

Thin and comfortable wool socks . Air ducts for increased airflow and comfort on the instep, additional insulation in the sole and toe. Good fit with shaped heel and elastic around the ankle. 2-pack.

Very comfortable socks in Coolmax . Coolmax pulls moisture away from the skin and allows it to pass to the outside of the sock where it quickly evaporates. 2-pack.

Grey melange 35018 8 Size: One size

QUALITY: 64 % wool, 18 % acrylic, 18 % nylon.

Grey/black 35018 6 Size: One size

QUALITY: 64 % wool, 21 % polyester, 15 % nylon.

SYNFIBER PRODUCT CATALOGUE 2016

Black 35018 7 Size: One size

QUALITY: 84 % coolmax, 15 % polyamide, 1 % elastane.

RAIN WEAR Handles precipitation. And perspiration.

RAIN WEAR

13913 UTILITY JACKET WINTER EN ISO 20471 CL.3/EN343 Orange/black: 13913 5 Yellow/black: 13913 6 Size: XS–4XL

NEW COLOUR

QUALITY: 100 % polyester 195 g/m² Polymax® membrane. Water column: 12 000 mm. Breathability: 7 000 g/m² / 24 hours. Padding: Body: 160 g/m². Sleeves: 140 g/m².

Windproof, waterproof, breathable and padded. The hood can be folded in the collar. Comfortable and protective collar with soft lining.

Elastic drawstrings and three-way adjustment for optimal fit, with or without a helmet.

Reflective bands provides good visibility in all positions.

Place for profiling. Practical pocket with space for ID-card. Pocket with zip. Inner stormpocket with zipper closure.

Sleeve pocket with water repellent zipper.

Pockets with zipper.

Hook and loop adjuster. Elastic drawstring adjuster.

RAINWEAR Our clothes are no strangers to wet weather. Actually, that’s an understatement: they have been out in rainstorms, hail, floods, sudden downpours, snow, sleet, thunder and lightning – in short, everything that the wonderful Nordic weather can throw at them. So you can be sure that you can carry on working without being taken by surprise by an unexpected change in the climate.

RAIN WEAR

SOLID CRAFTSMANSHIP.

13713 6 UTILITY PARKAS WINTER EN 471 CL.3/EN343

13313 UTILITY JACKET EN 471 CL.3/EN343

Detachable hood with zipper, hood with elastic drawstrings and three-way adjustment for optimal fit, with or without a helmet. Pockets with flap with snaps and zipper closure. Inside storm pocket with zip, ID-pocket in left front pocket, reflective trim around chest, sleeves and shoulders.

Detachable hood with zipper; hood with drawcord adjusters, hook and loop adjustments for optimum protection and fit. Double front flaps to prevent wind and moisture penetration, waterproof zipper on chest pocket and pockets on lower backside, inner storm pocket with zipper closure, ID-pocket in left front pocket, reflective trim across chest, sleeves and shoulders.

Yellow/black 13713 6 Size: XS–4XL

QUALITY: 100 % polyester 195 g/m² Polymax® membrane. Water column: 12 000 mm. Breathability: 7 000 g/m² / 24 hours. Padding: Body: 160 g/m². Sleeves: 140 g/m².

Orange/navy 13313 5 Yellow/black 13313 6 Size: XS–3XL

QUALITY: 100 % polyester, Polymax® membrane 200 g/m². Water column: 12 000 mm. Breathability 8 000 g/m²/24 hours.

13813 6 UTILITY BIBPANT WINTER EN 471 CL.1/EN 343

13613 UTILITY BIBPANT EN 471 CL.2/EN343

Elastic shoulder straps, elastic at waist on sides, cell phone pocket with hook and loop flap on chest, back pockets with flaps and hook and loop closure, waterproof zippers on slash pockets, inner kneepad pockets for 20 cm kneepads, zipper with flap in leg closure.

Black/yellow 13813 6 Size: XS–4XL

Orange/navy 13613 5 Yellow/black 13613 6 Size: XS–3XL

QUALITY: 100 % polyester 195 g/m² Polymax® membrane. Water column: 12 000 mm. Breathability: 7 000 g/m² / 24 hours.Padding: Body: 60 g/m².

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: 100 % polyester, Polymax® membrane 200 g/m². Water column: 12 000 mm. Breathability 8 000 g/m²/24 hours.

RAIN WEAR

SOLID CRAFTSMANSHIP.

37731 7 RAIN JACKET EN 343

45319 9 RAIN JACKET EN 343

Affordable and sturdy rain gear. Hood with drawcord adjuster, large front pockets with flaps, zipper and buttons for front closure, drawcord adjuster at bottom hem.

Lightweight rain jacket with a napped inside for ekstra comfort in the rain. Front pockets and folding hood in collar, ventilation in back, taped seams, YKK zippers, 25 mm reflective material on sleeves. Remains soft, even in cold.

Orange 37731 7 Size: S-3XL

QUALITY: PVC-coated, 100 % polyvinyl chloride, 400 g/m2. Thickness: 0,35 mm.

Black 45319 9 Size: XS–3XL

QUALITY: 100 % PU-coated polyester. 220 g/m². Brushed inside.

37331 7 RAIN TROUSERS EN 343

45219 9 RAIN TROUSERS EN 343

Sturdy bib with detatchable elastic braces.

Soft and comfortable rain trousers with napped inside. Back pocket and access opening to trouser pockets, taped seams. 25 mm reflective material on leg.

Orange 37331 7 Size: S-3XL

QUALITY: PVC-coated, 100 % polyvinyl chloride, 400 g/m2. Thickness: 0,35 mm.

Black 45219 9 Size: XS–3XL

QUALITY: 100 % PU-coated polyester. 220 g/m². Brushed inside.

SYNFIBER PRODUCT CATALOGUE 2016

45019/45117 RAIN JACKET EN 471 CL. 3 / EN 343 Durable rain gear tough enough for rough conditions. Hood with drawcord adjuster, large front pockets with flaps, ID pocket, front opening with zipper and buttons. Reflective material around sleeves, waist, chest and over shoulders. Yellow/black 45019 6 Orange/black 45117 5 Size: S-3XL

QUALITY: PVC-coated, 100 % polyester, 450 g/m².

45017/45018 RAIN TROUSERS PVC EN 471 CL. 3 / EN 343 Reflective material around waist and legs, elastic braces. Yellow/black 45018 6 Orange/black 45017 5 Size: S–3XL

QUALITY: PVC-coated, 100 % polyester, 450 g/m².

PROTECTION AGAINST FOUL WEATHER

NEW

30810 6 KRAFLA JACKET ISO 20471 CL. 3 / EN 343 Protective jacket for exposed areas and poor weather. Detachable hood with zipper, hood with three-way adjustment for optimal fit, with or without a helmet. High and protective collar, two spacious chest pockets, two side pockets, inner pocket with zip, ID-pocket and pocket for tablet. Adjustable hook and loop cuffs and drawcord adjuster at bottom hem. Light and comfortable lining. Expected in stock March. Yellow/grey 30810 6 Size: XS–4XL

QUALITY: 51 % PPAN-flame retardant, 43 % lyocell, 5 % para-aramid, 1% static controlTM +PU-film 275g/m2. Water column: 18.000 mm.Flame retardant reflecitve bands. Certified to: EN ISO 11612 Antiflame (class A1, A2, B1, C1:2008), EN 1149-5:2008, EN 1149-3:2004 Electrostatic properties, IEC 614821-2 Electric Arc (class 1), EN 343 class 3:2004 and EN ISO 20471 Hi-Vis class 3. Size XS og S has a slightly different design.

EN 343:2003+A1:2007 The standard EN 343 specifies test methods and demands on fabrics and seams in garments intended to protect against foul weather, i.e. weather conditions with combinations of precipitation (rain, snow) fog, humidity and wind. The garments are tested for waterproofness (X) and water vapour resistance (Y). X – Class waterproofness, level 1, 2 or 3 (best class 3) Y – Class water vapour resistance, level 1, 2 or 3 (best class 3) Water penetration resistance Water proofness (Wp) Pascal (Pa) Test on material

Tests on seam, before pre-treatment

Class 2

≥ 8 000 Pa before pretreatment ≥ 8 000 Pa

≥ 8 000 Pa after pretreatment ≥ 8 000 Pa

≥ 13 000 Pa after pretreatment ≥ 13 000 Pa

Recommendations for wearing time based on water vapour resistivity Temperature °C of working environment

Class 1

1 Ret above 40 min.

2 <Ret > 40 min.

3 <Ret 20 min.

105

205

250

100

240

5 * * * Ret = water vapour resistivity. *No limit for wearing time. NEW

30811 6 KRAFLA TROUSERS EN ISO 20471 CL.1/EN 343 Two side pockets, tool pocket and spacious cargo pocket. Elastic at waist, belt loops and detatchable suspenders. Reinforcement at inside leg and zipper at leg ends. Light and comfortable lining. Inner kneepad pockets for 20 or 29 cm kneepads. Expected in stock March. Grey/yellow 30811 6 Size: XS–4XL

Having effective ventilation openings and/or break periods, the time for wearing can be prolonged

ACTIVE In good shape. In the open air.

ACTIVE

36919 9 WOOL SWEATER Black 36919 9 Size: XS-3XL

QUALITY: 2/32 NM 100 % wool, Cordura® elbow reinforcements.

Warm wool sweater with high collar.

Zipper and a protective flap preventing chafting against the chin.

Elbow reinforcements in Cordura® and grey contrast details.

Thumb holes.

ACTIVE It’s cold outside, so you put on more clothes. Then you get hot and sweaty, so you take off a layer or two. Then you get cold. Then you get ill. That’s what it can be like, coping with Nordic weather. But it doesn’t have to be like that: our Active range are sweat-wicking, breathable clothes that keep you cool when it’s warm and warm when it suddenly turns cold again.

ACTIVE

SOLID CRAFTSMANSHIP.

35410 FRISCO FLEECE JACKET

NEW

Light, soft fleececjacket. Side pockets and chest pockets with zippers, pro-longed back and elastic at wrist. Expected in stock May. Red/grey 35410 8 Navy/grey 35410 1 Yellow/black 35410 6 Blue/grey 35410 3 Black/orange 35410 9 Size: S–3XL

QUALITY: 100 % polyester microfleece, 165 g/m²

35924/35925 FLEECE POLO

35918 9 CALGARY FLEECE JACKET

Soft polo with zipper and contrast stitching.

A classic fleece jacket well suited for profiling. Two zip pockets. Stretch side panels for extra mobility. Elastic drawstring at bottom hem.

Blue/turquise 35924 1 Black/grey 35924 9 Yellow/black 35925 1 Size: XS–3XL

QUALITY: Supersoft fleece, 100 % polyester, 165 g/m².

Black 35918 9 Size: S-3XL

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: Microfiber fleece, 100 % polyester, 240 g/m².

ACTIVE

SOLID CRAFTSMANSHIP.

35920 YUKON FLEECE JACKET

35818 SOFTSHELL JACKET

Two side pockets with zip and inner pocket with hook and loop. Contrast on shoulders are bonded with fleece.

Jacket in high quality softshell with comfortable and warm fleece inside. Two side pockets and chest pocket with zipper, inside pocket, hook and loop adjustment at wrist, drawcord adjuster in bottom edge. Two distinct structures in the outer material provide a visual effect.

Royal blue/black 35920 3 Black/orange 35920 9 Size: S-4XL

QUALITY: 35920 3: Microfiber fleece, 100 % polyester, 240 g/m². 35920 9: Microfiber fleece, 100 % polyester, 300 g/m². Contrast fabric: Polyester twill 355 g/m².

Red/black 35818 8 Black/black 35818 9 Size: XS–3XL

QUALITY: 94 % polyester / 6 % spandex, 320 g/m². Water column: 3 000 mm. Breathability: 5 000 g/m² per 24 t. (ASTM std.)

36719 9 DAKOTA HOODED JACKET

35921 6 SOFTSHELL JACKET

Soft and warm hoodie bonded with pile fleece. Two side pockets and one chest pocket with zippers and mesh lining. Contrast seams and orange details gives a rough design.

Softshell jacket in ripstop quality which makes the jacket more durable and less prone to holes and tearing on the shell fabric. Water repellent and high breathability, side-, chest- and inner pocket with zippers. Adjustment in bottom hem and cuffs. Reflective details.

Black 36719 9 Size: S-3XL

QUALITY: 100 % polyester jersey bonded with sherpa fleece.

Charcoal grey 35921 6 Size: XS–3XL

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: 100 % polyester ripstop 320 g/m². Water column: 5 000 mm. Breathability: 8 000 g/m² per 24 t. (ASTM std.). Sto-Nor/Loxy reflective bands.

ACTIVE

SOLID CRAFTSMANSHIP.

32718 9 THERMO JACKET

16518 1 FLANNEL SHIRT

The ultimate warm jacket for cold days. Long back and thumb holes on cuffs.

Super comfortable flannel shirt in amazing quality. Chest pockets, one incl. cell phone pocket. Collar with button down. Cotton twill reinforcements inside cuff and shoulders.

Black 32718 9 Size: S–3XL

QUALITY: 100 % polyester sheep pile, 380 g/m2.

Blue checkered 16518 1 Size: S–3XL

QUALITY: 100 % cotton, 116 g/m². Cotton twill reinforcements.

17516 T-SHIRT 1963

35930 6 HOODIE 1963

Comfortable T-shirt with 1963-logo.

Hoodie with two side pockets and 1963-logo.

Grey melange 17516 6 Black 17516 9 Size: S-3XL

Grey melange/grey 35930 6 Size: S–3XL

QUALITY: 100 % cotton, 160 g/m².

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: 100 % cotton, 300 g/m2.

ACTIVE

SOLID CRAFTSMANSHIP.

NEW

31220 SALIDA TECHNICAL T-SHIRT

3281 PERFORMANCE UNDERWEAR T-SHIRT

Comfortable and breathable Mag Cool t-shirt that dries quickly when wet. Well suited for intense working sessions or sports. Expected in stock May.

Technical underwear keeping moisture away from skin and makes sure you stay dry and comfortable, even during physically strenuous work.

Red/gey 31220 8 Black/orange 31220 9 Size: XS-3XL

Black 32817 9 Size: S–3XL

QUALITY: 96% polyester/4% spandex, 160 g/m2.

QUALITY: 100 % spun polyester ”drop needle”, 185 g/m².

3281 PERFORMANCE UNDERWEAR LONG SLEEVES

32815 9 PERFORMANCE UNDERWEAR LONGS

Technical longs keeping moisture away from skin and makes sure you stay dry and comfortable, even during physically strenuous work. Without fly.

Black Polo 32814 9 Black Jersey 32816 9 Size: S–3XL

QUALITY: 100 % spun polyester ”drop needle”, 185 g/m². Polo with spandex in collar.

Black 32815 9 Size: S–3XL

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: 100 % spun polyester ”drop needle”, 185 g/m².

ACTIVE

SOLID CRAFTSMANSHIP.

53591 WOOL TERRY UPPERS

535913 WOOL TERRY LONGS

353229 HEADOVER

Really warm underwear and an absolute favorite for those who work outdoors. The loops on the inside of the garments provide much air and thus fantastic insulation. Polo with zipper at neck.

Warm longs without fly. The loops on the inside gives a lot of air and very good insulation.

The neck gaiter is a two-layered headover with wool net on the inside, and wool interlock on the outside. This traps the air inside, and minimizes the ice problem when breathing in cold weather.

Black Polo 535911 Black Jersey 535912 Size: S–2XL

QUALITY: Woolterry, 65 % merino wool/20 % polyester/15 % polyamide.

Black 535913 Size: S–2XL

QUALITY: Wool terry, 65 % merino wool/20 % polyester/ 15 % polyamide.

Black 35322 9 Size: One size

QUALITY: 100 % merinowool, 120 g/m2.

35018 8 WOOLEN SOCKS

35018 6 WOOL SOCKS

35018 7 TECHNICAL SOCKS

Warm woolen socks! 2-pack.

Thin and comfortable wool socks . Air ducts for increased airflow and comfort on the instep, additional insulation in the sole and toe. Good fit with shaped heel and elastic around the ankle . 2-pack.

Very comfortable socks in Coolmax . Coolmax pulls moisture away from the skin and allows it to pass to the outside of the sock where it quickly evaporates. 2-pack.

Grey melange 35018 8 Size: One size

QUALITY: 64 % wool, 18 % acrylic, 18 % nylon.

Grey/black 35018 6 Size: One size

QUALITY: 64 % wool, 21 % polyester, 15 % nylon.

SYNFIBER PRODUCT CATALOGUE 2016

Black 35018 7 Size: One size

QUALITY: 84 % coolmax, 15 % polyamide, 1 % elastane.

PROFILING Clothes that speak for themselves.

PROFILING

We advise on place and size of the logo in order to profile your company in the best way - and to maintain the the certified visibility classification.

Your logo can for example be placed on the thigh, the pocket flap, or on the thigh pocket .

Name tags. Either outside or inside the garment.

Do you want your logo on the leg? There are many possibilities however, the transfer should not be installed over a seam.

PROFILING Branded clothing can promote your company. It can help to build team spirit, and it can also give the garments a distinctive character and exclusive look. Whatever your desired design, we can embroider it, apply transfer branding that looks like embroidery, or use standard transfers. Our transfers have a unique sharpness of image and are uniquely resistant to wear and tear from use and washing. They are also fire-retardant and can be applied to elastic fabrics as well as to normal work clothing. Almost the only limit is your imagination.

COMPANY LOGO ON THE CLOTHES - Environmental friendly heat transfers from Avery Dennisson NTP. - New! Transfer branding with an embroidered look. With this method, the lead time is shorter than with embroidering directly onto the garment. Additionally, there is no start-up cost for you to pay on each order, so you can order individual garments when you need them. They don’t go stiff when you wash them, either. - We will keep a stock of your branding transfers to use when you order. When our stock runs low, we will order new stock so that you won’t have to wait long for your clothing. - If you are planning to change your logo, it is important to give us as much notice as possible. - When you place your first order, you will have to send us a high resolution vector graphic file of the design.

- Heat transfers should not be applied over seams, tape or reflective sections. - With hi-vis garments, the logo should not be too large, otherwise it could nullify the garment’s visibility class. - Logos can be applied to rain wear. With such garments we have to use a type of transfer that adheres at a low heat. - If you need individual employees’ names on the garments, we can of course arrange this too. - You can find prices and quantities in our price list. - We can also offer silk-screen printing, which could save you money if you are ordering a large number of garments - John Deere, Stihl, Massey Ferguson, Plantasjen and Asko benefit from our expertise in design (special collections), production and logistics. - Contact us at: kundeservice@synfiber.no tlf +47 23 17 75 00

FOOTWEAR Tested in serious situations. And not-so-serious.

FOOTWEAR

900112 MERCURY (SBP E WRU HRO CI SRA) Waterproof winterboots with reel knob lacing system.

NEW

900112 Size: 40–47 HBR Micropours mebrane.

Durable and wicking Cambrelle® and 200 g insulating 3M ThinsulateTM lining.

Smart Atop reel knob lacing system.

Nubuk leather.

Poron XRD ergonomic insole.

Reinforced heel.

Composite toe cap.

Extra durability around the toe cap.

Light Phylon mid sole.

GIII outer sole. Medium hard with self-cleaning slot and ladder grip. Powerful stop pattern provides excellent grip throughout the year.

FOOTWEAR The foot is the part of the body that has the most to put up with, so we give it special attention. Our shoes are exposed to an inconceivable number of sharp objects – rusty nails, long spikes, short jagged things – and they can cope with it. You can even use them as a hammer, if you really must. And when sledgehammers, bricks and falling colleagues land on your shoes, your feet will stay safe. In short, we have designed them to cope with whatever tradesmen can throw at them, or drop on them. These shoes will protect both you and those around you!

90008 9 TANAMI (S1P SRA) Sturdy safety sandal in Nubuk upper, composite toe cap, nonmetallic anti-penetration. Comfortable shock-absorption in heel. Removable and formed insole in PU, hook and loop closure and reflective material in back for added visibility, anti-static, oil and acid resistant GII outer sole. 90008 9 Size: 36–46

900102 KARA (S1 SRA) Non metallic airy sandal/shoe. Airy mesh and Hi-Tec PVC uppers, composite toe cap, loose BN Super Lite ergonomic insole, antistatic, oil and acid resistant Gsport II outer sole. 900102 Size: 36-47

NON-METALLIC

900111 SAFETY CLOG (S1 ESD SRC) 117111 SAFETY CLOG (SB SRC) 900781 CLOG (NON SAFETY) Soil repellent uppers, perforated inside for better ventilation. Soft and comfortable sole with durable and wicking Cambrelle® lining, heel strap and shock-absorption in heel. The safety clog has aluminium toe cap and ESD. G-PU outer sole. S1 ESD: 900111 SB: 117111 Non safety 90078 1 Size: 36–48

900111 117111

900101 APOLLO (S1 SRA) Light safety jogger with suede and ventilating mesh upper. Aluminium toe cap, removable and formed PU insole with durable and wicking Cambrelle® lining. Lightweigth Phylon midsole, sturdy cleated, antistatic, oil and acid resistant GIII outer sole. 900101 Size: 37-47

900093 SAMBA (NON SAFETY) Lightweight and comfortable, non-safety leisure model. Synthetic and ventilating mesh upper incl. durable and wicking Cambrelle® lining. Reinforcement in front and heel region. Removable and form fitted PU footbed with Cambrelle® lining. G-Sport II outer sole. 900093 Size: 36-47

NON-METALLIC

FOOTWEAR

900115 SOLAR (S1P SRA)

SOLID CRAFTSMANSHIP.

NEW

900105 GALAXY (S1P SRA)

Seamless and sporty shoe with aluminium toe cap and non-metallic anti-penetration sole. Ventilating mesh and microfiber upper, durable and wicking Cambrelle® lining, loose and shaped BN SuperLite ergonomic insole, Phylon midsole and anti-static, oiland acid resistant G-Sport Planet outsole. Expected in stock May.

Trendy safety shoe with composite toe cap and non-metallic anti-penetration sole. Mesh and Hi-Tec PVC upper, lace loops with reflective details and metal loop at top for handy lacing. Loose BN SuperLite ergonomic inner sole and Phylon mid sole. Sturdy cleated, antistatic, oil and acid resistant GIII outer sole.

900115 Size: 37–47

900105 Size: 37–47

900113 PLUTO (S1P SRA E HRO SRA)

NEW

Safety shoe with user-friendly Atop reel knob lacing system. Composite toe cap, non-metallic anti-penetration sole,syntetic upper with reflective details. Poron XRD ergonomic insole with durable and wicking Cambrelle ® lining. Phylon midsole, antistatic features, oil- and acid resistant. GII outsole provides good grip. 900113 Size: 37–47

900114 ARES (S1P ESD SRA)

NEW

Lightweight safety shoe with Taidura and syntetic upper. Taidura and syntetic upper. Composite toe cap, non-metallic anti-penetration sole. Removable and formed PU insole with durable and wicking Cambrelle ® lining. Anti-static, oil and acid resistant GIII outer sole. 900114 Size: 37–47

SYNFIBER PRODUCT CATALOGUE 2016

NON-METALLIC

FOOTWEAR

SYMBOLS Toe cap withstands min 200 J/ 15 000 N from blows and compression. Oil resistant sole. 900100 INKA (S3 SRA) Sturdy shoes in dirt-repellent waxed Nubuck with reflective details. Non-metallic anti-penetration sole, composite toecap, upturned toe construction provides extra durability. Sturdy heel protection and PVC support. Removable and form fitted PU footbed with durable and wicking Cambrelle® lining. Lightweigth Phylon midsole, sturdy cleated, anti-static, oil and acid resistant GIII outer sole. 900100 Size: 37–47

NON-METALLIC

E – Shock-absorbing heel, minimum 20 J. P – Anti puncture sole, minimum 11,000 N. A – Anti-static, electrical resistance: 100k-1.000k. ESP – static electricity accumulated in the body will be charged safe and controlled through the sole construction. WRU – Water resistant upper, waterproof: 60 min., moisture absorption: max. 30%.

900094 ORCUS (SBP E WRU HRO SRA) Non-metallic, waterproof safety shoes. OutDry® membrane ensures dry feet even with a scratch to the outer material. Nubuck and nylon upper with Cambrelle® lining. Composite toe cap and non-metallic anti-penetration sole. Rubber reinforcement for extra durability in front and heel area. Removable and form fitted PU footbed with durable and wicking Cambrelle® lining. Reflective material on the sides for extra visibility. 900094 Size: 38-46

WATER PROOF

NON-METALLIC

900106 SIRIUS (S3 SRA) Demi Boot model in water repellent Nubuk upper. Composite toe cap, non-metallic anti-penetration sole, sturdy metal lace loops. Rubber reinforced toe-cap makes the shoe durable. Sturdy heel protection and support in PVC, reflective detail on heel. LN01 and wicking Cambrelle® lining, removable PU insole with Cambrelle® lining, Phylon midsole. Sturdy cleated, antistatic, oil and acid resistant GIII outer sole. 900106 Size: 37–47

CI – Cold insulation.

Extra resistant toe. HRO Heat-resistant sole. S1 = SB + A + E S1 - P = SB + A + E + P S2 = SB + A + E + WRU S3 = SB + A + E + WRU + P S4 = Rubber footwear or footwear made of polymer materials, antistatic properties (A), shockabsorbing heel (E). S5 = As S4 plus penetration protection, (P) and profiled tread. HRO = Heat resistant sole (contact for one minute at 300 °C). SRA = Slip retardant properties of standard ceramic floors by cleaning with water + detergent (sodium lauryl sulfate). SRB = Slip retardant properties on steel floor with glycerol detergent. SRC = SRA+SRB.

FOOTWEAR

SOLID CRAFTSMANSHIP.

900097 PALLAS (SBP-E-WRU-HRO-CI SRA) High waterproof winter boot in water resistant leather. Composite toe cap, non-metallic anti-penetration sole, AquaDry membrane ensures dry feet, 400g ThinshulateTM lining. Loose and shaped PU insole with durable and wicking Cambrelle® lining. and Phylon midsole. TRX II outsole provides good grip. 900097 Size: 37–47

900103 VEGA (S3 CI SRC) High non-metallic shaft boot with Kevlar® stitching. Composite toe cap, non-metallic anti-penetration sole, 400 g 3MThinsulate lining. Removable and shaped PU insole with Cambrelle® lining. Reflective details. antistatic, oil and acid resistant outer sole, Phylon midsol. TRX II outsole with provides good grip. 900103 Size: 40–47

NON-METALLIC

SYNFIBER PRODUCT CATALOGUE 2016

WATER PROOF

FOOTWEAR

SOLID CRAFTSMANSHIP.

900099 VESTA (S3 CI SRA) Practical, high winter boot - lacing in front and zipper closure on inside of leg. Composite toe cap, non-metallic antipenetration soles. Durable and wicking Cambrelle lining and 200 g 3M ThinsulateTM lining. Removable and shaped PU insole with Cambrelle lining. Anti-static, oil- and acid resistant TRX outer sole. 900099 Size: 37â&#x20AC;&#x201C;47

NON-METALLIC

Zipper closure and hook and loop closure on inside of leg.

900112 MERCURY (SBP E WRU HRO CI SRA)

NEW

High waterproof winter boot with user-friendly Atop reel knob lacing system. Composite toe cap, non-metallic anti-penetration sole. HBR Micropours membrane ensures dry feet, 200g ThinsulateTM lining appropriate for cool conditions or high activity levels. Poron XRD ergonomic insole with durable and wicking Cambrelle ÂŽ lining, phylon midsole, oil-resistant TRX II outsole with provides good grip in different work situations. 900112 Size: 40-47

WATER PROOF

SYNFIBER PRODUCT CATALOGUE 2016

SOLID CRAFTSMANSHIP.

SYNFIBER PRODUCT CATALOGUE 2016

SOLID CRAFTSMANSHIP.

THE CONSTRUCTION OF SAFETY SHOES 01 G-PU provides good grip, good shock absorption and doesn’t rub. G-PU has a good flexpoint, open design and grip patterns with friction knobs for safe and secure footing. 02 G-SPORT II is a lightweight sole providing optimum protection, shock absorption and comfort. Antitorison system in arch provides extra stability and upturned toe construction is a weight-saving design feature that provides extra durability over toe caps. Suitable for use indoors or outdoors in spring, summer and fall. 03 GRAVITY PLANET is a super lightweight outsole with good flex lines in the forefoot providing good flexibility. Stop pattern under mid-foot and grip design pattern on the sides of forefoot. Antitorison system supports the arch and the heel brake design contributes to a natural step. Suitable for use indoors or outdoors in spring, summer and fall. 04 GIII has toe-bumper for extra protection and grip. The sole is medium hard and has an asymmetric heel construction for natural touch down. Phylon midsole and good energy absorption in the heel ensures good shock absorption. GIII has a good flexpoint, self-cleaning slot in the sole, «ladder-grip” and powerful stop pattern that provides very good grip throughout the year.

05 TRX II is a solid, molded rubber sole, where the lightweight and comfortable Phylon midsole is embedded in the sturdy outsole. The sole has a powerful grip pattern and is suitable for use outdoors and on slippery surfaces. 06 ANTI-PENETRATION SOLE (P): A sole that protects the foot against penetration by nails and other pointed/sharp objects should always be used on construction sites. Most of Synfiber’s safety shoes have textile penetration soles, which does not conduct heat and will not affect metal detectors. The sole requires somewhat more space than steel, but weights less and is more comfortable.

10 SAFETY TOE CAP (SB) The toecap should protect against heavy blows/compression to the toes and should always be used on construction sites. A safety toecap of composite is non-metallic and will concequently not conduct temperatures. Composite requires more space than aluminium, which is used to produce the thinnest and lightest toecap. Aluminum toecaps weigh about 33 % less than steel toecaps, which are traditionally used the most though they’re relatively heavy. 11 PORON XRD CUSHIONING FOOTBED Well suited for the long working hours. Shock absorbing inserts in heel and forefoot, arch support and ergonomically shaped heel. Air channel design and antibacterial lining provides high comfort.

07 MIDSOLE in Phylon provides extreme cushioning and comfort.

12 SUPER LITE ERGONOMIC FOOTBED Sporty and superlight weight in combination with high comfort. Ergonomic design and shaped heel support. The air-channels in the 08 forefoot provides good ventilation and keeps STABILIZATION SYSTEM (GELENK) Stabilizes feet cool. the mid part of the foot and ensures that the shoe has a correct flex point. 09 OUTSOLE See section 1-5 for a description of our sole types.

SYNFIBER PRODUCT CATALOGUE 2016

13 PU ENERGY ABSORBING FOOTBED Durable and ergonomically shaped loose footbed in Polyurethane designed with an extra arch support. Good heel support included an extra red energy-absorbing zone. Cambrelle® lining provides air-circulation and high level of abrasion resistance.

ACCESSORIES & PERSONAL PROTECTIVE EQUIPMENT Keep a cool head. And a safe one.

ACCESSORIES & PPE

S20 CENTURION SPECTRUM (EN 397) Red ITEM NO: S20RRF Green ITEM NO: S20GRF Blue ITEM NO: S20BRF Yellow ITEM NO: S20YRF White ITEM NO: S20WRF Card holder ITEM NO: S30SBH

Adjustable ventilation

Rain management system to direct the rain off the helmet.

Safety helmet with integrated over spectacles visor.

Side and bottom coverage for maximum eyewear protection.

Shell: ABS.

Weight: 440 grams.

Place for badge holder (to be ordered separately).

Slots for earmufs.

Ratchet

Six Terylene headbands sweatband in brushed nylon with 4 mm foam.

ACCESSORIES & PERSONAL PROTECTIVE EQUIPMENT Let’s talk about hard hats for a moment. It’s all very well protecting the rest of your body, but the most important part to protect is the head. Everything else depends on it (and descends from it). You can’t use your arm to hammer in a nail if you’ve just stood up and knocked yourself out on a steel girder. And it’s hard to weld properly if a brick has fallen on your head. As a tradesman, everything starts and finishes with your head, and our hard hats have passed the strictest requirements and certifications available to ensure that you can carry on doing your best work.

ACCESSORIES & PPE

SOLID CRAFTSMANSHIP.

S03E CENTURION 1125 (EN 397)

S09 CENTURION CONCEPT (EN 397)

Basic model for general use, manufactured in HDPE (high density polytelen). Model 1125 has six headbands, sweatband in brushed nylon with 2 mm foam and venting. Weight: 365 grams.

Maximum protection and comfort - minimal weight! Manufactured in ABS, six terylene headbands, Hydro-Flock sweatband with high absorbency and 4mm foam, ventilation on top and rear. Ratchet and inner card holder. Weight: 307 grams.

Blue S03EBF Red S03ERF White S03EWF Green S03EGF Yellow S03EYF Yellow hi-vis S03EHVY

Spare sweatband S31N Spare cradle S33/30

White S09EWR Yellow S09EYR

Spare sweatband S31F Spare cradle S33/31

91181 9 BALACLAVA

45842 6 KNEEPADS EN14404/EN340

Soft, light balaclava, perfect to wear under a helmet.

Washable at 60 degrees and tumble-dry. Also tolerates oil and grease. Recyclable. Certified according to EN14404/EN340.

Black 91181 9 Size: One ize

QUALITY: 100 % micro supersoft fleece, 165 g/mÂ˛.

20 cm 45842 6 20 29 cm 45842 6 29

SYNFIBER PRODUCT CATALOGUE 2016

ACCESSORIES

SOLID CRAFTSMANSHIP.

905037 HOLSTER POCKETS FLAME RETARDANT

908037 HOLSTER POCKETS

Holster pockets for attatching to belt. Space for tools, loop ties. Flame retardant material. Pair. (Not certified).

Holster pockets for attatching to belt. Space for tools, loop ties. Pair.

Grey 905037 Size: One size

Black 908037 Size: One size

QUALITY: 99 % cotton/1 % carbon (antistatic), 350g/m².

900200 INSOLE ANTISTATIC

90527 9 SHOE LACES

Soles for safety boots, PU with Cambrelle® moisture wicking uppers, anti-static properties, constructed foot arch support, energy absorbing heel region.

Black 96 cm 90527 9 96 Black 142 cm 90527 9 142 Black 218 cm 90527 9 218

900200 Size: 37/38, 39/40, 41/42, 43/44, 45/46

QUALITY: Cordura.

SYNFIBER PRODUCT CATALOGUE 2016

SOLID CRAFTSMANSHIP.

ACCESSORIES

300600 WORK BELT, ELASTIC

300500 WORK BELT

Matte metal buckle, strong and elastic material, can be trimmed, embossed Synfiber-logo.

Metal buckle, strong, non-elastic material. Can be trimmed. Grey/black 300500

Black 300600

300700 BRACES Elastic braces with metal clips. Black 300700

90803 4 BELT LOOP 90803 5 HAMMER HOLDER Hook and loop fastener for tools. Metal holder for attaching to waistband or belt loop. Belt loop 90803 4 Hammer holder 90803 5

SYNFIBER PRODUCT CATALOGUE 2016

ACCESSORIES

SOLID CRAFTSMANSHIP.

35321 9 WOOL BEANIE, RIBBED

35320 9 TRAPPER WINTER HAT

Thick and warm ”Commando” beanie. Ribbed.

Warm, faux fur lined winter cap. Reflective logo on the back.

Black 35321 9 Size: One size

QUALITY: 100 % merino wool.

Black 35320 9 Size: One size

QUALITY: Nylon outer, polyester faux fur lining.

35319 9 FLEECE BEANIE

35219 9 WOOL BEANIE

Supersoft and comfortable fleece beanie incl. embroidered Synfiber symbol.

Warm wool beanie incl Synfiber-logo and reflective details. Soft Polycolon® lining.

Black 35319 9 Size: S/M, L/XL

QUALITY: 100 % polyester, 165 g/m².

QUALITY: 50 % wool, 50 % acrylic. Polycolon® för.

353229 HEADOVER

908046 FOLDABLE BAG

The neck gaiter is a two-layered headover with wool net on the inside, and wool interlock on the outside. This traps the air inside, and minimizes the ice problem when breathing in cold weather.

Practical bag packed in handy storage net. Outer zip pocket, inner mesh pocket, sturdy carrying straps and straps with clips. Plenty of space for profiling.

Black 35322 9 Size: One size

Black 908046 Size: 60 litres, 61x30x28 cm, Packed in storage net: 36x15x11 cm

QUALITY: 100 % merinowool, 120 g/m2.

SYNFIBER PRODUCT CATALOGUE 2016

QUALITY: Soft 600 D polyester, outer surface coated with matte PVC.

SOLID CRAFTSMANSHIP.

WASHING AND CARE OF WORKWEAR AND FOOTWEAR All garments have washing instructions, and it is important that these be carefully followed. Be particularly aware that garments made of fluorescent material can become discoloured and lose their function if washing instructions are not followed. Regular changing and washing of clothing increases lifetime and reduces accumulated soil. When using a clothes dryer, remove clothing immediately once they are dry. CLEANING AND MAINTENANCE OF SPECIAL WORKWEAR EN ISO 20471/EN ISO 11612 • Must not be washed together with other types of clothing. • Should not be soaked prior to washing. • Powerful alkaline detergents, such as spot remover, should not be used. • Detergents containing bleaching agents and/or dissolvents will destroy the reflective material and the colour of the product. • The temperature must not surpass 60 degrees celsius when using a clothes dryer. • Teflon-treated clothing will have reduced water repellency after repeated washes. • The garments should be inspected following each wash. Unlined garments:

Quilted garments:

MAKS. 50x = Max. number of washes. CLEANING AND MAINTENANCE OF EN 343 RAINWEAR • Rain gear should be wiped clean with a soft cloth or a sponge. No use of washing machine. • Powerful alkaline detergents, such as stain remover, should not be used. • No bleach. • No tumble dry. GENERAL CARE AND MAINTENANCE FOOTWEAR Prior to use, shoes should be stored in their original packaging in cool, dry and clean conditions. In order to prolong the life of your shoes, they should be regularly cared for, and we recommend that you treat your footwear with a wax – or silicone based – product. In this regard, it is of particular importance that you take extra care when applying to seam areas. If your shoes are exposed to moisture, they should be dried in a well ventilated room at normal room temperature, and not in sunlight or with direct heat. Synfiber uses only top grade leather in its products, and this quality of hide tends to have high fat content. Therefore, there might appear white “stripes” in the leather. These stripes are more visible on dark rather than light leather, and can be easily wiped away using a soft cloth. Use of safety footwear • As regards anti-static footwear, it is important to note that the shoe’s anti-static properties can be affected by use of an extra sole or a sole of a different type. • Moisture and wear and tear can deteriorate the condition of the shoes. The shoes must be regularly inspected to ensure that safety norms are being fulfilled. • As regards use of extra soles in footwear with a safety toe, it is important to ensure that there is ample space in the toe region. This can affect the shoe’s protection against blows and compression. • The user must ensure that footwear being used has the appropriate specifications with regard to the safety risks to which he or she is being exposed.

SYNFIBER PRODUCT CATALOGUE 2016

SOLID CRAFTSMANSHIP.

MEASUREMENT CHARTS

A B

OUR SIZE CODES

A = Neck width

B = Sleeve length

C = Chest width

2XL

3XL

D E F

D = Waist E = Hip width F = Inseam

MEN’S TROUSERS Size

D Waist

103

108

113

118

123

128

133

E Hip width

102

106

110

114

118

122

126

130

134

138

142

F Inseam

WOMEN’S TROUSERS Size

Waist

100

104

108

Hip width

102

106

110

114

118

122

126

130

134

138

Inseam

JACKETS AND UPPERS, UNISEX Size

2XL

3XL

4XL 07

Chest width

100

104

108

112

116

120

124

128

132

136

Sleeve length

Neck width

SHOES Size/length in mm

GIII/G-PU/TRX II G-Sport II

234

242

250

258

266

274

282

290

298

306

314

322

242

250

258

266

275

283

291

299

307

315

This overview is purely advisory and sizes may vary from model to model. Contact customer services or your sales representative for additional information.

SYNFIBER PRODUCT CATALOGUE 2016

PUBLISHER Synfiber AS Professor Birkelandsvei 35 Post box 12 Leirdal, 1008 Oslo Telephone: +47 23 17 75 00 Telefax: +47 23 17 75 01 kundeservice@synfiber.no www.synfiber.com

CONCEPT LLOWBANK * www.llowbank.no

PHOTO Blueline Studio www.blueline.studio.no

PRINT RK Grafisk www.rkg.no

ENVIRONMENTAL ETHICS

Synfiber is a member of the Ethical Trading Initiative (ETI). This means that we commit ourselves to work for trade which promotes human rights, labor rights, environments and development .

Eco-lighthouse works systematically with environmental measures in the everyday life. Synfiber meets the branch requirements and implementing measures for a more environmentally friendly operation and good working environments.

Synfiber strives for all products to be made with Oeko-Tex 100 certified fabrics. It means the materials used have been tested and are proven safe to use in clothing which is in contact with the skin. This certification guarantees that the health risks related to the products is as low as possible. In other words, this is a guarantee that harmful chemicals that could be left in the finished product do not exceed permitted values. 95% of all the garments in this catalog are manu足factured from Oeko-Tex 100 certified materials.

Synfiber accepts no responsibility for printing errors or discontinued products.

SOLID CRAFTSMANSHIP.

Your workwear dealer: