Product guide for ceramic and natural stone flooring and coverings by Tassullo Materiali

PRODUCT GUIDE

Retailers Area

floors

FACTORIES Tassullo - Via Nazionale 157 (TN) - ITALY Mollaro di Taio - Via alla Miniera 1 (TN) - ITALY Solferino - Via Napoleone III 110 (MN) - ITALY Ozzano Monferrato - Via Rivara 5 (AL) - ITALY Bucarest - Bolintin Deal - ROMANIA RESEARCH CENTRE Tassullo - Via Nazionale 157 (TN) - ITALY

Tassullo Materiali S.p.A.â&#x20AC;&#x192; T. +39.0463.662100 - F. +39.0463.662138 - www.tassullo.com

PRODUCT GUIDE FOR CERAMIC AND NATURAL STONE FLOORING AND COVERINGS www.tassullo.com

3 floors

Choose Tassullo because the Company has been the guarantee of high performing and high quality products and solutions for over a 100 years

Choose Tassullo because innovation has always been our driving force

At Tassullo, for over a hundred years, we have been

For us innovating means studying and realizing solu-

producing leading-edge solutions and systems for all

tions, systems materials for the building constructions

building sectors, from new constructions to renovation,

sector capable of redefining application methods and

historic conservative restoration to sustainable building

quality standards. This is why, day after day, we contin-

construction. Since 1909, Tassullo has been the syno-

ue to employ more resources in research.

nym of innovation, high performance and respect for the

Our new Research Centre was formed to coordinate all

environment.

the R&D laboratories of the Tassullo group and work

Careful building construction that finds in Tassullo nat-

through a team of professionals - engineers, chemists,

ural hydraulic lime the most effective answer. This is

physicists, architects and conservationists - capable of

why it is better to choose Tassullo: the real specialists in

constantly developing new products which satisfy and

buildings techniques and materials, leaders in Research

often anticipate the market demands.

& Development, thanks to our hundred-year-old know-

The new Centre operates in close collaboration with

how which today becomes the fundamental asset for

numerous bodies and Italian and European university

planning and construction in the new Millennium.

institutes and has become a constant reference in the

Tassullo means having a single contact from the extrac-

field of research.

tion and processing of raw materials to the distribution and promotion of the finished product.

Company profile 2

Choose Tassullo because it means certified quality in all aspects: customer, environment and safety

Choose Tassullo because our biggest commitment is being close to our customers For Tassullo being close to the customer has never been a slogan or an idiomatic expression: it is a choice. A choice confirmed by the constant research and development of the best solutions in the building sector but, most of all, by a capillary presence of our factories, logistic centres, laboratories and service centres throughout the territory. We have chosen this path in the firm belief that staying close to our customers means being present on the

The certifications obtained by Tassullo prove the concreteness of our intense efforts to obtain high quality standards of the product and constant attention to hu-

territory with men, infrastructures and means. FACTORY TASSULLO (TN)

mans and the environment. Tassullo has certified its operational health and safety system (BS OHSAS 18001), its quality management

FACTORY MOLLARO (TN)

TASSULLO (TN)

RESEARCH CENTRE BUCHAREST BRANCH

system (EN ISO 9001) and its environment management system (EN ISO 14001), to ensure the best for its workers and customers. At Tassullo the entire production process complies with the strictest environmental standards and the highest

FACTORY SOLFERINO (MN) FACTORY OZZANO (AL)

FACTORY BUCHAREST

international safety standards for those involved in the production phase and for those who use the product.

QUALTY MANAGEMENT SYSTEM EN ISO 9001

TASSULLO RESEARCH CENTRE

ENVIRONMENTAL MANAGEMENT SYSTEM EN ISO 14001

RESEARCH CENTRE

SAFETY MANAGEMENT SYSTEM OHSAS BS18001

TASSULLO FACTORY

CLEAN ENERGY TASSULLO uses energy produced from renewable resources

Via Nazionale 157, Tassullo (TN) - ITALY

Bucharest branch, Bolintin Deal - Romania

Via Nazionale 157, Tassullo (TN) - ITALY

SOLFERINO FACTORY Via Napoleone III 110, Solferino (MN) - ITALY

OZZANO FACTORY

Via Rivara 5, Ozzano Monferrato (AL) - ITALY

BUCHAREST FACTORY

Autostrada Bucuresti - Pitesti, Km 23 Bolintin Deal - Romania

MOLLARO FACTORY

Via alla Miniera 1, Taio (TN) - ITALY

GENERAL INDEX 1 - INSTALLATION OF CERAMIC AND STONE MATERIALS ADHESIVES T-FIX > professional adhesive for interiors............ p. 08 T-FIX IE > professional adhesive for interiors and exteriors..................... p. 08 T-FIX FLEX > flexible professional adhesive.......... p. 09 T-FIX HP > high performance professional adhesive.......................... p. 09 T-FIX HP FLEX > high performance flexible professional adhesive...... p. 10

NATURAL LIME ADHESIVES TADP/C > natural lime adhesive for green construction........................... p. 10

2 - PREPARATION OF INSTALLATION BASES BINDING AGENTS FOR FLOOR SCREEDS MIXTO PAVI > special binding agent for floor screeds.............................. p. 18 MIXTO PAVI B > special binding agent for low thickness floor screeds.... p. 18 MIXTO PAVI R > special binding agent for quick drying floor screeds........... p. 19

SUB-BASE FLOOR SCREEDS PAVI/1 > lightweight heat-insulating floor screed for sub-base........................ p. 20

FLOOR SCREEDS MASSETTO > ready-to-use floor screed................ p. 20

GROUTING FUGATASS/XS > extremely fine grout for 0-4 mm joints........................ p. 12 FUGATASS/S > fine grout for 0-6 mm joints.......... p. 12 FUGATASS/L > grout for 5-15 mm joints............... p. 13

TECNOMASS > civil floor screed............................. p. 21

SPECIAL FLOOR SCREEDS TECNOMASS ULTRARAPIDO > ultra-rapid curing and drying screed......... p. 21 T48S/N > quick drying screed................................ p. 22

SILICON SEALANTS SILICONE NEUTRO > neutral silicone ideal for grouting tiles......... p. 14 SILICONE UNIVERSALE > acetic silicone ideal for sealing sanitaryware..... p. 14

T48S/B > limited thickness screed........................ p. 22 TSL-20 > self-levelling screed............................... p. 23

NATURAL FLOOR SCREEDS BIO-E/SOFT > filling screed containing natural lime.................................... p. 24 BIO-E/FONDO > screed containing natural lime...... p. 24

SMOOTHING T-LIVEL > self-levelling top coat plaster for 1-10 mm thicknesses...................... p. 25 T-LIVEL MAXI> self-levelling smoothing coat for 3-30 mm thicknesses............. p. 25

3 - WATER PROOFING SYSTEMS WATER PROOFING LEVELLING IDROTASS > dual-component high performance waterproofing levelling...................... p. 28

5 - RECOMMENDATIONS FOR APPLICATION Floor system with slab made of concrete and masonry.............................. p. 36 Floor system on concrete bed................................ p. 36

IDROTASS MONOTECH > single-component waterproofing levelling...... p. 29

Shower stall protection system.............................. p. 36

IDROTASS EASYTECH > dual-component elastic waterproofing coat that can be applied using a brush or roller.............. p. 29

Laying large sized tiles/slabs on radiating floor.................................................... p. 37

Terraces and balconies flooring system................ p. 37

Installation of stone material vertically.................. p. 37 Screed with expansion or distribution joint............ p. 38 Floor screed with radiating heating....................... p. 39 Laying tiles on crackled floor screed..................... p. 40

4 - ACCESSORIES AND COMPLEMENTARY PRODUCTS ACCESSORIES FOR IDROTASS WATERPROOFING SYSTEM IDROBAND > rubberised sealing tape.................... p. 32 IDROFOLIO > waterproof film................................. p. 32 IDROKIT VERT > waterproof film............................ p. 32

Laying tiles on tiles................................................. p. 41 Repairing tiles on irregular crackled floor screed......................... p. 42 Replacing tiles on localised restoration of floor screed................. p. 43 Using adhesives...................................................... p. 44

IDROKIT VERT > vertical drainage kit.................... p. 32 IDROKIT FRONT > horizontal drainage kit............. p. 32 RETE AR160 > fibreglass reinforcement mesh...... p. 32

ACCESSORIES FOR INSTALLATION OF CERAMIC AND STONE MATERIALS EXPANSION JOINT.................................................. p. 33 EDGING PROFILE.................................................... p. 33 DRIP MOULDING..................................................... p. 33

Accessories for the cleaning of ceramic and fired tiles ACID CLEANER........................................................ p. 33

PRIMERS AND STRENGTHENING AGENTS FOR FLOOR SCREEDS TLTX > acrylic primer and strengthening latex for plaster.......................................... p. 33

1 - INSTALLATION OF CERAMIC AND STONE MATERIALS

ADHESIVES T-FIX professional adhesive for indoors...................p. 08 T-FIX IE professional adhesive for interiors and exteriors..... p. 08 T-FIX FLEX flexible professional adhesive.........................p. 09 T-FIX HP high performance professional adhesive........p. 09 T-FIX HP FLEX high performance flexible professional adhesive.........................p. 10

NATURAL LIME ADHESIVES TADP/C natural lime adhesive for green building........p. 10

GROUTING FUGATASS/XS extremely fine grout for 0-4 mm joints...........p. 12 FUGATASS/S fine grout for 0-6 mm joint..............................p. 12 FUGATASS/L grout for 5-15 mm joints..................................p. 13

SILICON SEALANTS SILICONE NEUTRO neutral silicone ideal for grouting tiles...........p. 14 SILICONE UNIVERSALE acetic silicone ideal for sealing sanitaryware.........................p. 14

INSTALLATION OF CERAMIC AND STONE MATERIALS ADHESIVES

T-FIX

PROFESSIONAL ADHESIVES FOR INTERIORS

TECHNICAL CHARACTERISTICS: T-FIX is a normal setting cement adhesive free from vertical sliding, suitable for horizontal and vertical interior bonding of ceramic tiles, porcelain stoneware, clinkers, and stone materials. Classification according to UNI EN 12004: Class C1T - cement adhesive (C), standard setting adhesive (1) and reduced sliding cement adhesive (T). FIELD OF APPLICATION: T-FIX is used as an adhesive for the installation of ceramic tiles (fired brick, single-fired tiles, double-fired tiles, clinkers, glazed porcelain, etc.) and stone material for wall or floor installation exclusively for interiors. ADVANTAGES: - no vertical sliding - high adhesion APPLICATION: T-FIX is applied on clean and dry surfaces. In order to improve adhesion, it is advisable to apply a thin layer of adhesive on the surface using a smooth metal spatula and immediately afterwards spread the adhesive using a toothed spatula. Under standard conditions (laboratory test) the adhesive open time is 20 minutes. MIXING WATER: 6.5 l/25 kg bag MR c5, QI c 4.1

YIELD: approx. 3-4 kg/m²

Leed Credits

PACK SIZE:

5 kg bag 25 kg bag CERTIFICATE

C1T EN 12004

no vertical sliding

ADHESIVES

T-FIX IE

PROFESSIONAL ADHESIVES FOR INTERIORS AND EXTERIORS

TECHNICAL CHARACTERISTICS: T-FIX IE is a standard setting cement adhesive free from vertical sliding and with extended open time, suitable for horizontal and vertical bonding of ceramic tiles, porcelain stoneware, clinkers, and stone materials for interiors as well as exteriors. Classification according to UNI EN 12004: Class C1TE cement adhesive (C), standard setting (1) reduced sliding (T) and extended open time adhesive (E). FIELD OF APPLICATION: T-FIX IE is used as an adhesive for the installation of ceramic tiles and stone materials on walls or floors, for interiors and exteriors. ADVANTAGES: - no vertical sliding - extended open time - high adhesion APPLICATION: T_FIX IE must be applied to dry and clean surfaces free from dust. To improve adhesion, it is advisable to apply a thin layer of adhesive on the surface using a smooth metal spatula and immediately afterwards spread the adhesive using a toothed spatula. Under standard conditions (laboratory test) the adhesive open time is 30 minutes. MIXING WATER: 6.5 l/bag MR c5, QI c 4.1

YIELD: approx. 3-4 kg/m²

Leed Credits

PACK SIZE: 25 kg bag CERTIFICATE

C1TE EN 12004

REFER TO THE TECHNICAL DATA SHEET FOR COMPLETE INFORMATION REGARDING THE FIELD OF USE, METHOD OF USE AND WARNINGS.

60’ 45

15 30

no vertical sliding

open time

INSTALLATION OF CERAMIC AND STONE MATERIALS ADHESIVES

T-FIX FLEX

FLEXIBLE PROFESSIONAL ADHESIVE

TECHNICAL CHARACTERISTICS: T-FIX FLEX is a flexible and elastic cement adhesive, free from vertical sliding and featuring extended open time, suitable for horizontal and vertical bonding of tiles and stone materials, both for exteriors and interiors. Classification according to UNI EN 12004: Class C1TE - cement adhesive (C), standard setting (1) reduced sliding (T) and extended open time adhesive (E). FIELD OF APPLICATION: Thanks to its flexible and elastic technology, T-FIX FLEX is suitable for installation on floor screeds with a radiating system or for large sized coverings. It is used as an adhesive for installation of ceramic tiles (fired brick, single-fired tiles, double-fired tiles, clinkers, glazed porcelain, etc.) and stone materials for walls or floors, both for interiors and exteriors. ADVANTAGES:

MR c5, QI c 4.1

- flexible technology - designed for large area installation on radiating floors - no vertical sliding - high adhesion

APPLICATION: T-FIX FLEX is applied to clean and dry surfaces free from dust. In order to improve adhesion, it is advisable to apply a thin layer of adhesive on the surface using a smooth metal spatula and immediately afterwards spread the adhesive using a toothed spatula. Place the tile making sure the back is clean, dry and free of dust, and exert proper pressure to ensure that the adhesive wets the tile completely.

Leed Credits

MIXING WATER: 6.5 l/bag YIELD: approx. 3-4 kg/m² PACK SIZE: 25 kg bag

CERTIFICATE

ABILITY

large sizes

radiant flooring

C1TE EN 12004

no vertical sliding

high

HTP: flexibility

ADHESIVES

T-FIX HP

HIGH PERFORMANCE PROFESSIONAL ADHESIVE

TECHNICAL CHARACTERISTICS: T-FIX HP is a high performance cement adhesive free from vertical sliding and featuring extended open time, suitable for vertical and horizontal bonding of ceramic tiles, stoneware, clinkers, stone materials for exteriors and interiors. Classification according to UNI EN 12004: Class C2TE - cement adhesive (C), enhanced and added characteristics adhesive (2) reduced sliding (T) and extended open time adhesive (E). FIELD OF APPLICATION: T_FIX HP is used as an installation adhesive under particularly challenging conditions on surfaces and ceramic tiles (fired brick, single-fired tiles, double-fired tiles, clinkers, glazed porcelain, etc.) and on stone materials for walls or floors, both for interiors and exteriors. ADVANTAGES:

- flexible technology - designed for large area installation on radiant floors - no vertical sliding - high adhesion

APPLICATION: T-FIX HP is applied to clean and dry surfaces free from dust. In order to improve adhesion, it is advisable to apply a thin layer of adhesive on the surface using a smooth metal spatula and immediately afterwards spread the adhesive using a toothed spatula. Place the tile making sure the back is clean, dry and free of dust, and exert proper pressure to ensure that the adhesive wets the tile completely. MR c5, QI c 4.1 Leed Credits

MIXING WATER: 7 l/bag YIELD: approx. 3-4 kg/m² PACK SIZE: 25 kg bag

CERTIFICATE

C2TE EN 12004

no vertical sliding

high

HTP: adhesion

all types of material

REFER TO THE TECHNICAL DATA SHEET FOR COMPLETE INFORMATION REGARDING THE FIELD OF USE, METHOD OF USE AND WARNINGS.

INSTALLATION OF CERAMIC AND STONE MATERIALS ADHESIVES

T-FIX HP FLEX

HIGH PERFORMANCE FLEXIBLE PROFESSIONAL ADHESIVE

TECHNICAL CHARACTERISTICS: T-FIX HP FLEX is a high performance cement adhesive with greater elasticity free from vertical sliding and featuring extended open time, suitable for horizontal and vertical bonding of ceramic tiles, stoneware, clinkers, stone materials, both for interiors and exteriors. Classification according to UNI EN 12004: Class C2TE - cement adhesive (C), enhanced and added characteristics adhesive (2) reduced sliding (T), extended open time (E) and transverse deformation Class S1. FIELD OF APPLICATION: T-FIX HP FLEX is used as an adhesive for installing ceramic tiles (fired brick, single-fired tiles, double-fired tiles, clinkers, glazed porcelain, etc.) and stone materials on walls or floors, in particularly difficult areas such as wellness centres, swimming pools, bathrooms, saunas, on walls or floors, for both interiors and exteriors. Thanks to its high elasticity, it is suitable for large sized coverings. ADVANTAGES:

- greater elasticity - designed for large sized installations in difficult areas - no vertical sliding - high adhesion

APPLICATION: T-FIX HP FLEX is applied to clean and dry surfaces, free from dust. In order to improve adhesion, it is advisable to apply a thin layer of adhesive on the surface using a smooth metal spatula and immediately afterwards spread the adhesive using a toothed spatula. Place the tile making sure the back is clean, dry and free of dust, and exert proper pressure to ensure that the adhesive wets the tile completely. MIXING WATER: 7 l/bag YIELD: approx. 3-4 kg/m² OPEN TIME (EN 1346): > 30 minutes

CERTIFICATE

C2TE

EN 12004

PACK SIZE: 25 kg bag

no vertical sliding

high

HTP: flexibility

high

all types of material

ABILITY

large sizes

radiant flooring

HTP: adhesion

NATURAL LIME ADHESIVES

TADP/C

NATURAL LIME ADHESIVE FOR GREEN BUILDING

TECHNICAL CHARACTERISTICS: TADP/C is a clear and natural adhesive for ceramic tiles, stoneware, fired brick, natural stone (marble, granite) in BIO-E NHL 5 certified natural hydraulic lime characterised by high resistance, high adhesion, excellent workability, breathability and durability over time also under critical conditions such as damp environments or environments subject to strong thermal excursions. FIELD OF APPLICATION: TADP/C can be applied over floor screeds with or without radiant heating system and BIO-E NHL 5 plasters or other hydraulic binder, on any rough plaster in air lime or hydraulic binder as long as they are consistent and dust-free. ADVANTAGES:

- high resistance - high adhesion - natural and breathable - cement and additives free - contains BIO-E NHL 5

APPLICATION: TADP/C can be applied using a shaped trowel over the application surface of tiles, both horizontally and vertically. MIXING WATER: 0.25 l/kg (approx. 7.5 litres/bag) MR c5, QI c 4.1 Leed Credits

YIELD: 4 kg/m² INITIAL TRACTION ADHESION: > 0.5 N /mm² (UNI EN 1348) ABILITY

PACK SIZE: 30 kg bag natural hydraulic lime

REFER TO THE TECHNICAL DATA SHEET FOR COMPLETE INFORMATION REGARDING THE FIELD OF USE, METHOD OF USE AND WARNINGS.

high breathability

does not contain cement

INSTALLATION OF CERAMIC AND STONE MATERIALS

INSTALLATION OF CERAMIC AND STONE MATERIALS GROUTING EXTRA-FINE GROUT FOR 0-4 mm JOINTS

FUGATASS/XS

ECHNICAL CHARACTERISTICS: FUGATASS/XS is an ultra-fine, single-component, water-repellent, high performance cement grout for ceramics and natural stone, for grouting joints ranging from 0 and 4 mm, for both interiors and exteriors. FIELD OF APPLICATION: FUGATASS/XS is used as for grouting for all kinds of ceramic tiles (single-fired tiles, double-fired tiles, clinkers, glazed porcelain), stone materials (marble, granite, natural stones) or vitreous mosaic , on flooring as well as covering, in homes, offices, shopping centres, shops, bathrooms, swimming pools or industrial floors where no specific resistance to chemical agents or acid-proof grouting (for e.g. warehouses, car showrooms, etc.) is required. ADVANTAGES:

- water repellent - resistant to acids with pH > 3 - resistant to freezing/de-freezing - UV resistant - benign (extremely low emissions, GEV-EMICODE: EC1)

APPLICATION: it must be mixed only and exclusively with clean water at the rate of approx. 1.6-1.7 litres per 5 kg bag or 7.5 litres per 25 kg bag. Apply the mixture using a spatula, trowel or rubber squeegee filling the joint uniformly without gaps or irregularities throughout the depth with movements diagonal to the joints. MIXING WATER: 300 g/kg BENDING RESISTANCE: > 2.5 N/mm2 PACK SIZE: 5 kg bag

IN CONFORMITY WITH

EN 13888

CG2WA cement mortar grout

COLLECTION OF

24 COLORS

GROUTING FINE GROUT FOR 0-6 mm JOINTS

FUGATASS/S

TECHNICAL CHARACTERISTICS: FUGATASS/S is a fine, single-component, water-repellent, high performance cement grout for ceramics and natural stone, for grouting joints ranging between 0 and 6 mm, for both exteriors and interiors. FIELD OF APPLICATION: FUGATASS/S is used for grouting of all kinds of ceramic tiles (single-fired, double-fired, clinkers, porcelain stoneware), stone materials (marble, granite, natural stones) or vitreous mosaic, on flooring as well as covering, in homes, offices, shopping centres, shops, bathrooms, swimming pools or industrial floors where no specific resistance to chemical agents or acid-proof grouting (for e.g. warehouses, car showrooms, etc.) is required. ADVANTAGES:

- water repellent - resistant to acids with pH > 3 - resistant to freezing/de-freezing - UV resistant - benign (extremely low emissions, GEV-EMICODE: EC1)

APPLICATION: it must be mixed only and exclusively with clean water at the rate of approx. 1.4-1.5 litres per 5 kg bag or 7.25 litres per 25 kg bag. Apply the mixture using a spatula, trowel or rubber squeegee filling the joint uniformly without gaps or irregularities throughout the depth with movements diagonal to the joints. MIXING WATER: 290 g/kg FLEXURAL STRENGTH: > 2.5 N/mm2 PACK SIZE: 5 kg bag

IN CONFORMITY WITH

EN 13888

CG2WA cement mortar grout

REFER TO THE TECHNICAL DATA SHEET FOR COMPLETE INFORMATION REGARDING THE FIELD OF USE, METHOD OF USE AND WARNINGS.

COLLECTION OF

24 COLORS

INSTALLATION OF CERAMIC AND STONE MATERIALS GROUTING

FUGATASS/L

GROUT FOR 5-15 mm JOINTS

TECHNICAL CHARACTERISTICS: FUGATASS/L is a single-component, water-repellent, high performance cement grout for ceramics and natural stone, for grouting joints ranging between 5 and 15 mm, for interiors as well as exteriors. FIELD OF APPLICATION: FUGATASS/L is used for grouting of all kinds of ceramic tiles (single-fired, double-fired, clinkers, porcelain stoneware), stone materials (marble, granite, natural stones) or vitreous mosaic, on flooring as well as covering, in homes, offices, shopping centres, shops, bathrooms, swimming pools or industrial floors where no specific resistance to chemical agents or acid-proof grouting (for e.g. warehouses, car showrooms, etc.) is required. ADVANTAGES:

- water repellent - resistant to acids with pH > 3 - resistant to freezing/de-freezing - UV resistant - not harmful for health (extremely low emissions, GEV-EMICODE: EC1)

APPLICATION: it must be mixed only and exclusively with clean water at the rate of approx. 1-1.2 litres per 5 kg bag or 5.5 litres per 25 kg bag. Apply the mixture using a spatula, trowel or rubber squeegee filling the joint uniformly without gaps or irregularities throughout the depth with movements diagonal to the joints. MIXING WATER: 220 g/kg FLEXURAL STRENGTH: > 2.5 N/mm2 PACK SIZE: 5 kg bag

IN CONFORMITY WITH

EN 13888

CG2WA cement mortar grout

COLLECTION OF

24 COLORS

REFER TO THE TECHNICAL DATA SHEET FOR COMPLETE INFORMATION REGARDING THE FIELD OF USE, METHOD OF USE AND WARNINGS.

INSTALLATION OF CERAMIC AND STONE MATERIALS SILICONE SEALANTS

SILICONE NEUTRO

NEUTRAL SILICONE SUITABLE FOR GROUTING TILES

TECHNICAL CHARACTERISTICS: Single-component, medium-low modulus, neutral curing, transparent or coloured, silicone sealant with powerful adhesion on porous and nonporous building materials. Adheres strongly on primerless cement, bricks, hydraulic and air mortars, aluminium, polyacrylates, polycarbonates, wood, glass, glazed surfaces, plastic structural systems. FIELD OF APPLICATION: Ideal for obtaining elastic joints between tiles in ceramic floorings and coverings. Can be used for sealing on glass windows and plastic structural systems, PVC, polycarbonates, wood, metal and, generally, for perfect elastic seals between the construction elements in the building construction sector with deformation less than 25%. ADVANTAGES:

- odourless - resistant to atmospheric agents - resistant to UV rays - resistant to extreme temperatures (high or low temperatures)

APPLICATION: Must be applied on clean and dry surfaces. Clean the surfaces using abrasive action, if necessary. Clean glass and metal with solvent. For plastics, consult the manufacturer/supplier for suitable cleaning treatment. No primer required on masonry, plasters, glass, mirrors, aluminium, steel and acrylic materials. APPLICATION TEMPERATURE: 5-40째C WORKING TIME: 10 minutes ELONGATION TO RUPTURE: 250+-50% MOVEMENT CAPABICITY OF JOINT: 25% PACK SIZE: 280 ml PE cartridges

SILICONE SEALANTS ACETIC SILICONE SUITALE FOR SEALING SANITARYWARE

SILICONE UNIVERSALE

TECHNICAL CHARACTERISTICS: One-component transparent or coloured sealant with acetic curing particularly suitable for smooth, non-absorbing surfaces, adheres strongly to porous as well as nonporous building materials. Adheres strongly on primerless ceramic, metals, anodized aluminium, polyacrylates, polycarbonates, glass, glazed surfaces, plastic structural systems. FIELD OF APPLICATION: Particularly suitable for waterproof sealing and elastic joints in sanitaryware, WC, wash basins, shower stalls, bath tubs, or for obtaining elastic joints between tiles in ceramic flooring or coverings. Can be used for sealing on glass windows and plastic structural systems, PVC, polycarbonates, metal and, generally, for perfectly elastic and waterproof seals between nonporous elements like glass, ceramic tiles, metal and aluminium. Do not use for sealing mirrors. ADVANTAGES:

- mould-proof - permanent fixability - resistant to atmospheric agents - resistant to extreme temperatures (high or low temperatures) - dimensionally stable

APPLICATION: Must be applied on clean and dry, supports, free from dust, inconsistent parts, salts, grease, wax, organic materials, old paint, rust. Clean the surfaces using abrasive action, if necessary. Clean glass with alcohol or metals with solvent. For plastics, consult the manufacturer/supplier for suitable cleaning treatment. No primer required on glass, aluminium, steel, acrylic materials, polycarbonates. APPLICATION TEMPERATURE: 5-40째C WORKING TIME: 10-15 minutes E MODULUS 100% (DIN 53504-S1): 0.42 MPa MOVEMENT CAPABICITY OF JOINT: 25% PACK SIZE: 280 ml PE cartridges

REFER TO THE TECHNICAL DATA SHEET FOR COMPLETE INFORMATION REGARDING THE FIELD OF USE, METHOD OF USE AND WARNINGS.

INSTALLATION OF CERAMIC AND STONE MATERIALS COLOUR CHART FOR GROUT AND SILICONE SEALANTS COLOUR CODE

PRODUCT NAME

00 Transparent

FUGATASS/XS

FUGATASS/S

FUGATASS/L

SILICONE NEUTRO

SILICONE UNIVERSALE

01 WHITE

02 SILVER

03 GREY

04 LONDON GREY

05 ANTRACITE

06 BLACK

07 PANNA/CREAM

08 BEIGE

09 BEIGE SCURO

10 CACHI

11 TERRACOTTA

12 NOCCIOLA

13 TESTA DI MORO

14 TORTORA

15 MILITARY GREY

16 ROSA/PINK

17 DARK PINK

18 MATTONE

19 VIOLET

20 PALE BLUE

21 BLUE

22 VERDE MARE

23 GREEN

24 ORANGE

WARNING: The colours shown here are indicative and there may be differences with the product indicated. REFER TO THE TECHNICAL DATA SHEET FOR COMPLETE INFORMATION REGARDING THE FIELD OF USE, METHOD OF USE AND WARNINGS.

2 - PREPARATION OF INSTALLATION BASES

BINDING AGENTS FOR FLOOR SCREEDS MIXTO PAVI special binder for floor screeds......................p. 18 MIXTO PAVI B special binder for low thickness floor screeds.......................p. 18 MIXTO PAVI R special binder for quick-drying screeds.................................p. 19

SUB-BASE FLOOR SCREEDS PAVI/1 lightweight heat-insulating floor screed for sub-base................................p. 20

FLOOR SCREEDS MASSETTO ready-to-use floor screed................................p. 20 TECNOMASS civil floor screed..............................................p. 21

SPECIAL FLOOR SCREEDS TECNOMASS ULTRARAPIDO ultra-rapid drying and curing screed..............p. 21 T48S/N quick drying floor screed.................................p. 22 T48S/B limited thickness floor screed.........................p. 22 TSL-20 self-levelling screed........................................p. 23

NATURAL FLOOR SCREEDS BIO-E/SOFT natural lime floor screed for filling......................................p. 24 BIO-E/FONDO screed containing natural lime........................p. 24

SMOOTHING T-LIVEL self-levelling smoothing for 1-10 mm thicknesses.................................p. 25 T-LIVEL MAXI self-levelling smoothing for 3-30 mm thicknesses.................................p. 25

PREPARATION OF INSTALLATION BASES BINDING AGENTS FOR FLOOR SCREEDS

MIXTO PAVI

SPECIAL BINDER FOR SCREEDS

TECHNICAL CHARACTERISTICS: MIXTO PAVI is a special hydraulic cement binder for preparation at the site of floor screeds for civil use featuring high workablity and ready to walk on 24 hours after installation. It conforms to UNI EN 413-1 and can be classified in Class MC22, 5X. FIELD OF APPLICATION: MIXTO PAVI is added to 4/5 mm aggregates for the installation of substrates with a minimum thickness of 4 cm. thick. It is designed to receive all types of coatings. ADVANTAGES: - quick drying as compared to cement - suitable for all types of coatings - can also be mixed with lightweight aggregates APPLICATION: MIXTO PAVI must be mixed with clean floor screed sand, free from organic substances, with proper granulometry curve (0 to 4/5 mm), and water. The mix can be prepared by hand or in a concrete mixer. MIXTO PAVI can be mixed, whenever necessary, with lightweight aggregate (cork, expanded clay, polystyrene, etc.) in order to make lightened floor screeds used for filling. DOSAGE FOR TRADITIONAL FLOOR SCREED: approx. 250 kg/m³ YIELD: approx. 2.5 kg/(m² x cm) 28 days RESISTANCE TO COMPRESSION (UNI EN 196-1): approx. 28 N/mm² PACK SIZE: 25 kg bag or bulk in silos IN CONFORMITY WITH UNI EN 413-1

CLASS

MC22, 5X

BINDING AGENTS FOR FLOOR SCREEDS SPECIAL BINDER FOR LOW THICKNESS FLOOR SCREED

MIXTO PAVI B

TECHNICAL CHARACTERISTICS: MIXTO PAVI B is a special hydraulic cement binder for the preparation at the site and installation of floor screeds with low thickness and high elasticity. MIX TOPAVIB conforms to UNI EN 413-1 and can be classified as MC22, 5X with reference to this standard. FIELD OF APPLICATION: MIXTO PAVI B can be used for preparing civil floor screeds more than 1 cm thick, with excellent elasticity, adhesion and mechanical resistance; it can be walked on 12/24 hours after installation and it can be finished with tiles, natural stone, wood or carpet. It is used in addition to aggregate for floor screeds with a maximum granulometry of 3/4 mm. MIXTO PAVI B reduces pavement installation times with respect to traditional preparation of standard floor screeds with sand and cement. MIXTO PAVI B is suitable for renovations because floor screeds can be installed on discontinuous and heterogeneous surfaces. ADVANTAGES:

- excellent primer capacity - controlled shrinkage - reduces waiting times - suitable for renovation

APPLICATION: MIXTO PAVI B must be mixed only and exclusively with clean sand used for floor screed with suitable granulometry curve (0 to 3/4 mm) and water, depending on the recommended dose. Mixing can be done by hand or in a concrete mixer. DOSAGE: approx. 300 kg/m³ YIELD: approx. 3 kg/(m² x cm) 28 days RESISTANCE TO COMPRESSION (UNI EN 196-1): approx. 35 N/mm² PACK SIZE: 25 kg bag or bulk in silos

REFER TO THE TECHNICAL DATA SHEET FOR COMPLETE INFORMATION REGARDING THE FIELD OF USE, METHOD OF USE AND WARNINGS.

IN CONFORMITY WITH UNI EN 413-1

CLASS

MC22, 5X

PREPARATION OF INSTALLATION BASES BINDING AGENTS FOR FLOOR SCREEDS SPECIAL BINDER FOR QUICK DRYING SCREEDS

MIXTO PAVI R

TECHNICAL CHARACTERISTICS: MIXTO PAVI R is a special hydraulic binder specific for the preparation and installation at the site of quick drying floor screeds. MIXTO PAVI R makes it possible to obtain floor screeds for civil use that can be walked upon 12/24 hours after installation and it can be finished with all types of surfaces seven days after installation. MIXTO PAVI R conforms to UNI EN 413-1 and can be classified as MC22,5X. FIELD OF APPLICATION: MIXTO PAVI R is used in addition to aggregates for floor screed with a maximum granulometry 4/5 mm to create quick drying substrates with a minimum thickness of 4 cm. MIXTO PAVI R reduces pavement installation waiting time as compared to traditional preparation of standard floor screeds in sand and cement. ADVANTAGES: - quick, reduces waiting time considerably - suitable for the installation of floor heating systems APPLICATION: MIXTO PAVI R must be mixed only and exclusively with clean sand used for floor screed with an adequate granulometry curve (0 to 4/5 mm) and water, depending on the recommended doses. Mixing can be done by hand or in a concrete mixer. DOSAGE: approx. 250 kg/m³ YIELD: approx. 2.5 kg/(m² x cm) 28 days RESISTANCE TO COMPRESSION (UNI EN 196-1): approx. 38 N/mm² PACK SIZE: 25 kg bag or bulk in silos

IN CONFORMITY WITH UNI EN 413-1

CLASS

MC22, 5X

REFER TO THE TECHNICAL DATA SHEET FOR COMPLETE INFORMATION REGARDING THE FIELD OF USE, METHOD OF USE AND WARNINGS.

PREPARATION OF INSTALLATION BASES SUB-BASE FLOOR SCREEDS

PAVI/1

THERMALLY INSULATED LIGTHWEIGHT FLOOR SCREED

TECHNICAL CHARACTERISTICS: PAVI/1 is a lightweight fibre-reinforced, polystyrene and hydraulic binder based floor screed to be used as thermally-insulating base for filling between the floor and the floor screed pavement installation. PAVI/1 conforms to M.D. 10/05/2004. FIELD OF APPLICATION: PAVI/1 makes it possible to easily cover the piping of electrical and hydraulic systems placed on the floor in such a way as to obtain a flat surface on which the floor screed can be easily applied. PAVI/1 ensures high thermal insulation and is sound-absorbent. ADVANTAGES: - sound absorbent and thermally insulating - lightweight - certified mechanical strength APPLICATION: PAVI/1 must be applied directly on the floor and the piping, with a thickness more than 2-3 cm, making sure to meet the levelling requirements, using a rake, straight edge or trowel. MIXING WATER: 7-10 l/bag HEAT CONDUCTIVITY: (ë) 0.084 W/(m x °K) MR c4, MR c5 Leed Credits

YIELD: approx. 3 - 4 kg/(m² x cm) PACK SIZE: 12 kg bag TESTED

ABILITY

high mechanical strength

heat insulation material

soundproofing material

FLOOR SCREEDS READY-TO-USE FLOOR SCREED

MASSETTO

TECHNICAL CHARACTERISTICS: MASSETTO floor screed is a hydraulic binder-based grout with selected aggregates suitable for applying floor screeds for civil use, both for interiors and exteriors. MASSETTO conforms to standard UNI EN 13813 concerning “Screed material and floor screeds - Screed material - Properties and requirements”, designed to be in compliance with EN 13813 CT-C25-F5 and subject to CE marking in accordance with current legislation. MASSETTO conforms to M.D. 10/05/2004. FIELD OF APPLICATION: MASSETTO is a grout to be used for the installation of floor screeds for civil use with thickness ranging from 4 to 12 cm. MASSETTO is suitable for floor heating systems and is compatible with the installation of electro-welded reinforced meshes. ADVANTAGES: - ensures quick installation - certified mechanical strength - CE marking APPLICATION: MASSETTO must be placed far from the perimeter walls; it must be applied and levelled using a straight edge and trowel according to standard methods of application of traditional sand and cement grouts for civil use floor screeds. MIXING WATER: 3 l/bag MR c5, QI c4.1 Leed Credits

YIELD: approx. 20 kg/(m² x cm) PACK SIZE: 30 kg bag or bulk in silos

REFER TO THE TECHNICAL DATA SHEET FOR COMPLETE INFORMATION REGARDING THE FIELD OF USE, METHOD OF USE AND WARNINGS.

TESTED

IN CONFORMITY WITH UNI EN 13813

high mechanical strength

CT-C25-F5

PREPARATION OF INSTALLATION BASES FLOOR SCREEDS

TECNOMASS

CIVIL FLOOR SCREED

TECHNICAL CHARACTERISTICS: TECNOMASS ULTRARAPIDO is a ready-to-use fibre-reinforced grout suitable for the installation of quick setting and curing (24h) floor screeds for civil use, with quick drying and controlled shrinkage. It is suitable for all operations involved in restoration or preparation of new civil floor screeds that can be finished and walked upon during the course of the same day. TECNOMASS ULTRARAPIDO conforms to standard UNI EN 13813 concerning “Screed material and floor screeds - Screed material - Properties and requirements”, designed to be in compliance with EN 13813 CT-C30-F5 and subject to CE marking in accordance with current legislation. FIELD OF APPLICATION: TECNOMASS ULTRARAPIDO is a fibre-reinforced grout to be used for the installation of quick setting and curing as well as quick drying floor screeds with thickness more than 4 cm. Ceramic, fired brick or natural stone tiles can be laid in the floor screed after it is cured and dried within 4 hours after it is applied, and within 24 hours after installation wood flooring, carpeting, linoleum, vinyl or PVC covering, etc. can be laid. ADVANTAGES: - increases installation speed - can be walked upon 3 hours after it is installed - can be finished with tiles and natural stone 4 hours after it is installed

MR c5, QI c4.1 Leed Credits

APPLICATION: TECNOMASS ULTRARAPIDO must be applied in layers more than 4 cm thick far away from the floor, from perimeter walls and pillars, if any; it must be spread and levelled using a straight edge and trowel according to standard methods of application of traditional sand and cement grouts for civil use floor screeds. It is advisable to spread a polyethylene sheet (at least 0.2 mm thick) or a similar barrier to vapour between the floor, with or without heat insulation, and the floor screed. MIXING WATER: 2 l/bag YIELD: approx. 20 kg/(m² x cm) PACK SIZE: 30 kg bag

SPECIAL FLOOR SCREEDS ULTRARAPID CURING AND DRYING FLOOR SCREED

TECNOMASS ULTRARAPIDO

CARATTERISTICHE: TECNOMASS ULTRARAPIDO è un betoncino pronto fibrorinforzato ideale per la formazione di massetti per uso civile a rapida presa e indurimento (24h), a rapida asciugatura e a ritiro controllato. è ideale in tutti gli interventi di ripristino o di realizzazione di nuovo massetto civile che debba essere rifinibile e calpestabile nell’arco della stessa giornata dell’intervento. TECNOMASS ULTRARAPIDO è conforme alla norma UNI EN 13813 riguardante “Massetti e materiali per massetti proprietà e requisiti”, designato EN 13813 CT-C30-F5 e soggetto a marcatura CE secondo la normativa vigente. CAMPO DI APPLICAZIONE: TECNOMASS ULTRARAPIDO è un betoncino fibrorinforzato da utilizzarsi per la messa in opera di massetti a rapida presa ed indurimento nonché a rapida asciugatura con spessore maggiore di 4 cm. Sul massetto indurito e asciutto, entro 4 ore dalla posa potranno essere applicate piastrelle in ceramica, cotto, pietra naturale ed entro 24 h dalla posa rivestimenti in legno, moquette, linoleum, rivestimenti vinilici, pvc, ecc. VANTAGGI: - aumenta la velocità di posa - pedonabile dopo 3 ore dalla posa - rifinibile con piastrelle e pietra naturale dopo 4 ore dalla posa

MR c5, QI c4.1 Leed Credits

APPLICAZIONE: TECNOMASS ULTRARAPIDO viene posato in spessori maggiori di 4 cm disgiunto dal solaio, dalle pareti perimetrali e da eventuali pilastri, steso e regolarizzato mediante staggia e frattazzo secondo le consuete modalità di posa utilizzate per i massetti tradizionali sabbia e cemento. Si consiglia la stesura di un foglio in polietilene (spessore minimo 0,2 mm) o di analoga barriera al vapore tra solaio, con o senza isolamento termico ed il massetto. ACQUA D’IMPASTO: 2 l/sacco RESA: ca. 20 kg/(m2 x cm) CONFEZIONE: sacco da 30 kg

TESTED

high mechanical strength

IN CONFORMITY WITH UNI EN 13813

CT-C30-F5

60’ 45

15 30

quick drying

REFER TO THE TECHNICAL DATA SHEET FOR COMPLETE INFORMATION REGARDING THE FIELD OF USE, METHOD OF USE AND WARNINGS.

PREPARATION OF INSTALLATION BASES SPECIAL FLOOR SCREEDS

T48S/N

QUICK DRYING FLOOR SCREED

TECHNICAL CHARACTERISTICS: T48S/N is a hydraulic binder-based fibre-reinforced grout combined with selected aggregates, ideal for the formation of quick drying floor screeds for civil use. T48S/N conforms to standard UNI EN 13813 concerning “Screed material and floor screeds - Screed material - Properties and requirements”, designed to be in compliance with EN 13813 CT-C25-F5 and subject to CE marking in accordance with current legislation. T48S/N conforms to M.D. 10/05/2004. FIELD OF APPLICATION: T48S/N is a fibre-reinforced grout to be used for the installation of quick drying floor screeds for civil use with thickness in the range of 4 - 6 cm. T48S/N is suitable for floor heating systems and it is compatible with the installation of electro-welded reinforced meshes. ADVANTAGES: - suitable for floor heating systems - it allows the preparation of controlled drying mixes - certified mechanical strength - can be finished with wood, PVC, carpet, etc. after 5-7days.

MR c5, QI c4.1

APPLICATION: T48S/N must be placed far from the perimeter walls and floor, with thicknesses in the range of 4-6cm; it must be applied and levelled using a straight edge and trowel according to standard methods of application of traditional sand and cement grouts for civil use floor screeds. It is advisable to spread a polyethylene sheet (at least 0.2 mm thick) or a similar barrier to vapour between the floor, with or without heat insulation, and T48S/N.

Leed Credits

MIXING WATER: 2 l/bag YIELD: approx. 20 kg/(m² x cm) PACK SIZE: 30 kg bag or bulk in silos

IN CONFORMITY WITH UNI EN 13813

TESTED

CT-C25-F5

high mechanical strength

ABILITY 60’ 45

15 30

radiant flooring

quick drying

SPECIAL FLOOR SCREEDS

T48S/B

LOW THICKNESS FLOOR SCREED

TECHNICAL CHARACTERISTICS: T48S/B is a hydraulic binder-based, fibre-reinforced grout combined with selected aggregates ideal for the formation of high floor screeds for civil use to be applied with a thicknesses in the range of 2 and 4 cm. T48S/B conforms to standard UNI EN 13813 concerning “Screed material and floor screeds - Screed material - Properties and requirements”, designed to be in compliance with EN 13813 CT-C25F5-B0,5 and subject to CE marking in accordance with current legislation. T48S/B conforms to M.D. 10/05/2004. FIELD OF APPLICATION: T48S/B is a grout to be used for the installation of floor screeds for civil use with thickness ranging from 2 to 4 cm. T48S/B can be applied directly to existing floors or floor screeds that require screeds with thickness less than or equal to 4 cm to match the height of the finished floor. ADVANTAGES: - high adhesion - certified mechanical strength APPLICATION: T48S/B must be applied far from the perimeter walls in layers with thickness ranging from 2 to 4 cm; it must be applied and levelled using a straight edge and trowel according to standard methods of application of traditional sand and cement grouts for civil use floor screeds. MIXING WATER: 3 l/bag MR c5, QI c4.1

YIELD: approx. 20 kg/(m² x cm)

Leed Credits

PACK SIZE: 30 kg bag or bulk in silos

REFER TO THE TECHNICAL DATA SHEET FOR COMPLETE INFORMATION REGARDING THE FIELD OF USE, METHOD OF USE AND WARNINGS.

IN CONFORMITY WITH UNI EN 13813

TESTED

ABILITY

CT-C25-F5-B0,5

high mechanical strength

for existent irregular bases

PREPARATION OF INSTALLATION BASES SPECIAL FLOOR SCREEDS SELF-LEVELLING SCREED

TSL-20

TECHNICAL CHARACTERISTICS: TSL-20 is a ready-to-use, self-levelling screed containing special hydraulic binders, selected aggregates and additives. TSL-20 conforms to M.D. 10/05/2004. FIELD OF APPLICATION: TSL-20 is to be used for the installation of floor screeds for civil use in areas not subject to leaching with thicknesses between 4 and 6 cm. TSL-20 can be applied directly on floor cleaned to remove dusts or inconsistent parts, with or without heat insulation, or on lightweight infill screeds such as TASSULLO PAVI/1. ADVANTAGES: - reduces application times - is distributed uniformly on the installation surface - suitable for floor heating systems - increases screed installation speed APPLICATION: TSL-20 must be applied on stable, homogeneous and flat floors. In the presence of lightweight infill floor screeds, these must ensure stability of the self-levelling floor screed. A continuous polythene film must be spread on floors or on lightweight infills, sealed at the ends by means of water-resistant adhesive tape. MIXING WATER: 0.16 l/kg YIELD: approx. 20 kg/(mÂ˛ x cm) PACK SIZE: bulk in silos ABILITY

high fluidity

REFER TO THE TECHNICAL DATA SHEET FOR COMPLETE INFORMATION REGARDING THE FIELD OF USE, METHOD OF USE AND WARNINGS.

PREPARATION OF INSTALLATION BASES NATURAL FLOOR SCREEDS NATURAL LIME FLOOR SCREEDS FOR FILLING

BIO-E/SOFT

TECHNICAL CHARACTERISTICS: BIO-E SOFT is a fibre-reinforced natural grout in BIO-E NHL 5 certified natural hydraulic lime and light mineral aggregates to be used as insulating and infilling sub-base between the floor and the floor screed built using BIO-E FONDO or using BIO-E and sand at the work site. BIO-E SOFT is free from cement and additives. FIELD OF APPLICATION: BIO-E SOFT is indicated for application on lightened natural breathable floor screeds to be installed between the floor and the floor screed. ADVANTAGES: - light, does not add weight to the structures - excellent soundproofing - cement and additives free - contains BIO-E NHL 5 APPLICATION: BIO-E SOFT must be spread in a thickness more than 2 - 3 cm directly over the floor and the piping, making sure to match the level requirements, using a rake, straight edge or trowel depending on the consistency of the mix. MIXING WATER: 13 - 16 litres/bag MR c5

YIELD: approx. 8 kg/(m² x cm)

Leed Credits

COMPRESSION RESISTANCE (UNI EN 1015-11): approx. 1.2 N/mm² PACK SIZE: 13 kg bag

ABILITY

natural hydraulic lime

high breathability

does not contain cement

NATURAL FLOOR SCREEDS

BIO-E/FONDO

NATURAL LIME FLOOR SCREED

TECHNICAL CHARACTERISTICS: BIO-E FONDO is a ready-to-use grout in BIO-E NHL 5 certified natural hydraulic lime suited for the construction of natural and breathable floor screeds for civil use that can be finished using ceramic, stone, wood flooring, etc. BIO-E FONDO is free from cement and additives. FIELD OF APPLICATION: BIO-E FONDO is a breathable and natural grout to be used for the installation of floor screeds for civil use with thickness varying in the range of 4 to 12 cm. BIO-E FONDO can be applied on standard floors, on sub bases or foundations with or without thermal insulation or on infilling floor screeds. When fully cured, BIO-E FONDO can accept any type of flooring: tiles, wood, stone slabs, bricks, etc. ADVANTAGES:

- all natural - cement and additives free - contains BIO-E NHL 5 - CE marking in compliance with the regulations in force

APPLICATION: BIO-E FONDO must be applied with the texture of “moist soil”, then spread and finished using a straight edge and plastic trowel following standard procedures used for traditional floor screeds. MIXING WATER: 0.15 l/kg (approx. 4.5 litres/bag) MR c5, QI c4.1 Leed Credits

YIELD: approx. 18 kg/(m² x cm) PACK SIZE: 30 kg bag ABILITY

natural hydraulic lime

REFER TO THE TECHNICAL DATA SHEET FOR COMPLETE INFORMATION REGARDING THE FIELD OF USE, METHOD OF USE AND WARNINGS.

high breathability

does not contain cement

PREPARATION OF INSTALLATION BASES SMOOTHING Self-levelling TOP COAT PLASTER for 1-10 mm thicknesses

T-LIVEL

TECHNICAL CHARACTERISTICS: T-LIVEL is a self-levelling finishing coat for 1 to 10 mm thicknesses, suitable for smoothing and finishing on traditional or quick drying floor screeds. FIELD OF APPLICATION: T-LIVEL can be applied to traditional or quick drying interior floor screeds. It improves the surface finish by removing roughness due to finishing defects on the traditional floor screeds. Makes it possible to recover the flatness up to 10mm thickness. ADVANTAGES: - resistance to abrasion - high adhesion - certified mechanical strength APPLICATION: A thin layer of T-LIVEL must be applied on the existent floor screeds using a metal spatula. MIXING WATER: 5.5 l/bag YIELD: approx. 1.7 kg/m³ PACK SIZE: 25 kg bag MR c5, QI c4.1 Leed Credits

ABILITY

high fluidity

high

HTP: adhesion

SMOOTHING SELF-LEVELLING TOP COAT PLASTER FOR 3-30 mm THICKNESSES

T-LIVEL MAXI

TECHNICAL CHARACTERISTICS: T-LIVEL MAXI is a self-levelling product containing special quick curing hydraulic binders, selected aggregates and additives, suitable for the smoothing and finishing traditional floor screeds or quick drying floor screeds with thicknesses between 3 and 30 millimetres. T-LIVEL MAXI will make the floor screed suitable for laying tiles made of natural stone, ceramic or fired brick tiles, wood, carpet, linoleum, vinyl coatings, etc. T-LIVEL MAXI has high mechanical strength, abrasion resistance, adhesion and durability over time. T-LIVEL MAXI conforms to M.D. 10/05/2004. FIELD OF APPLICATION: T-LIVEL MAXI can be applied on internal traditional floor screeds or on quick drying floor screeds containing hydraulic binders, after these are cleaned to remove dust, inconsistent parts, adhesive residues, oil, etc. T-LIVEL MAXI makes it possible to eliminate irregularities or difference in levels less than 3 cm due to defects caused by removal of tiles or old coatings. ADVANTAGES: MR c5, QI c 4.1 Leed Credits

- resistance to abrasion - high adhesion - certified mechanical strength - reduces floor screed installation times

APPLICATION: A thin layer of T-LIVEL MAXI must be applied on the existent floor screed using a metal spatula. For thicknesses exceeding 2 - 3 mm, the product must be applied on the installation substrate. Thanks to the high fluidity, a flat surface can be obtained which can be finished using a straight edge. MIXING WATER: 5.5 l/bag

ABILITY

YIELD: approx. 1.7 kg/(m² x cm) PACK SIZE: 25 kg bag

high fluidity

high

HTP: adhesion

REFER TO THE TECHNICAL DATA SHEET FOR COMPLETE INFORMATION REGARDING THE FIELD OF USE, METHOD OF USE AND WARNINGS.

3 - WATER PROOFING SYSTEMS

WATER PROOFING LEVELLING IDROTASS high performance dual-component waterproofing levelling........p. 28 IDROTASS MONOTECH single-component waterproofing levelling.....p. 29 IDROTASS EASYTECH dual-component elastic waterproofing coat that can be applied using a brush or roller.....p. 29

WATER PROOFING SYSTEMS WATER PROOFING LEVELLING DUAL-COMPONENT HIGH PERFORMANCE WATERPROOFING LEVELLING

IDROTASS

WHAT IS IDROTASS: IDROTASS is a dual component product containing special hydraulic binders, selected aggregates with maximum granulometry 0.6 mm combined with special additives in water dispersion, suitable for creating levelling that is waterproof, carbon dioxide and vapour proof, and has high deformability and priming capacity. IDROTASS conforms to M.D. 10/05/2004. APPLICATION: IDROTASS must be applied to clean surfaces free from dust, inconsistent parts, salts, grease and organic materials, using a metal spatula in layers approx. 2 mm thick. Additional coats must be be applied after the first coat is cured (approx. 12 - 24 hours). It is advisable to use reinforcing meshes made of fibreglass with weight greater than 150 g/m² if there are surfaces showing cracks caused by hydraulic shrinkage, or subject to thermal deformation or static settling. USE: IDROTASS is used as a protective waterproofing levelling product for surfaces, tanks, vertical (waterproofing of retaining walls) and horizontal (waterproofing before laying tiles) concrete slabs, and on sand and cement floor screeds, blocks or hydraulic binder based plasters that require protection from absorption of water and from water infiltration. IDROTASS creates a protective layer impermeable to water, vapour, carbon dioxide and other gases, a layer resistant to de-icing salts that extends the life of the treated surface.

MR c5, QI c 4.1 Leed Credits

TECHNICAL DATA - BAG: physical state grey powder granulometry 0.6 mm mixture ratio POWDER/LIQUID = 3/1 specific wt. of powder approx. 1,450 kg/m³ pH > 10.5 fire Class A1 TECHNICAL DATA . CAN: physical state whitish liquid mixture ratio POWDER/LIQUID = 3/1 specific wt. approx. 1,100 kg/m³ pH approx. 9 flammability no TECHNICAL DATA - MIXED PRODUCT: physical state plastic mortar specific wt. approx. 1,600 kg/m³ yield approx. 3 kg/m³ pH > 10.5 adhesion to concrete > 1 N/mm2 elastic modulus 500 N/mm2 PACK SIZE:

powder in 24 kg bags liquid in 8 litre cans

REFER TO THE TECHNICAL DATA SHEET FOR COMPLETE INFORMATION REGARDING THE FIELD OF USE, METHOD OF USE AND WARNINGS.

TESTED

UNI EN 1504 CLS protection

water protection

CERTIFICATE

for containing water potability

UV resistant

several chemical attack

freeze - thaw cycling

crack bridging

100% recyclable

UNI EN 13687

WATER PROOFING SYSTEMS WATER PROOFING LEVELLING

IDROTASS MONOTECH

SINGLE-COMPONENT WATERPROOFING LEVELLING

WHAT IS IDROTASS MONOTECH: IDROTASS MONOTECH is a single component product containing special hydraulic binders, selected aggregates with maximum granulometry 0.6 mm in combination with special additives in water dispersion, suitable for creating flexible coverings impermeable to water and vapour; characterised by high deformability and priming capacity. IDROTASS MONOTECH conforms to M.D. 10/05/2004. APPLICATION: IDROTASS MONOTECH must be applied on clean and dry surfaces that are stable and consistent, free from dust, salts, grease, mould, organic materials, using a metal spatula in layers approx. 1.5 - 2 mm thick. Additional coats must be applied after the first coat is cured (approx. 12 - 24 hours). It is is advisable to use reinforcing meshes made of fibreglass with weight greater than 150 g/mÂ˛ if there are surfaces showing cracks caused by hydraulic shrinkage, or subject to thermal deformation or static settling. USE: IDROTASS MONOTECH is used as a protective waterproofing membrane at the work site on surfaces, tanks or vertical and horizontal concrete slabs (waterproofing before laying tiles), existent ceramic, fired brick or natural stone flooring, on sand and cement floor screeds, blocks or hydraulic binder based plasters that require protection from absorption of water and infiltration of water. IDROTASS MONOTECH creates a protective layer impermeable to water, vapour, carbon dioxide, resistant to de-icing salts, sulphates, nitrates, chlorides, capable of providing resistance to freezing - de-freezing and extending the working life of the treated surface. It is ideal for protecting plasters of floor screeds or concrete in order to increase or adapt the durability according to the exposure class. MR c5, QI c 4.1 Leed Credits

TECHNICAL DATA: BASIC PERFORMANCE physical state grey powder granulometry 0 to 0.6 mm pH > 10.5 yield approx. 4 kg/m2 (two coats)

CERTIFICATE

water protection

for containing water potability

several chemical attack

freeze - thaw cycling

UV resistant

minimum thickness that can be obtained: 1.5 - 2 mm classification according to UNI EN 12004: Class C2F PACK SIZE: 20 kg bag

UNI EN 13687

100% recyclable

WATER PROOFING LEVELLING

IDROTASS EASYTECH

dual-component elastic waterproofing levelling that can be applied using brush or roller

TECHNICAL CHARACTERISTICS: IDROTASS EASYTECH is a dual-component product containing special hydraulic binders, which can be applied using a brush or roller; it is suitable for obtaining elastic levelling characterised by high deformability and priming capacity, is impermeable to water and carbon dioxide. It conforms to M.D. 10/05/2004. FIELD OF APPLICATION: IDROTASS EASYTECH is used as protective elastic, waterproofing levelling on terraces, balconies, footpaths, masonry foundations in concrete or mixed stone or bricks both vertically (waterproofing retaining walls) and horizontally (waterproofing before laying the tiles) on concrete, on sand and cement floor screeds with good surface finish, plasterboard, blocks and hydraulic binder based plasters. The applicability of the product using a brush or roller is ideal for treating surfaces with irregular geometry. IDROTASS EASYTECH forms a protective layer impermeable to water and carbon dioxide. ADVANTAGES:

- easy to apply (using brush or roller) - highly adaptable to irregular surfaces - flexible mineral product (Crack-Bridging Ability) - can be disposed of or recycled as aggregate at the end of its life

APPLICATION: IDROTASS EASYTECH must be applied using a brush or roller on clean surfaces free from dust and inconsistent parts, in layers approx. 2 mm thick, after mixing the power and liquid components. Additional coats must be be applied after the first coat is cured (approx. 12 - 24 hours). On edges and in corners, drainage sets or expansion joints, use the special components TASSULLO IDROBAND or IDROFOLIO. MR c5, QI c 4.1 Leed Credits

CERTIFICATE

YIELD (mixed product): approx. 4-6 kg/m2 (two coats) pH > 10,5 ELASTIC MODULUS: approx. 500 MPa PACK SIZE:

water protection

for containing water potability

several chemical attack

freeze - thaw cycling

UV resistant

powder in 24 kg bags liquid in 10 litre cans UNI EN 13687

100% recyclable

REFER TO THE TECHNICAL DATA SHEET FOR COMPLETE INFORMATION REGARDING THE FIELD OF USE, METHOD OF USE AND WARNINGS.

4 - ACCESSORIES AND COMPLEMENTARY PRODUCTS

ACCESSORIES FOR IDROTASS WATERPROOFING SYSTEM IDROBAND rubberised sealing tape...................................p. 32 IDROFOLIO waterproof film...............................................p. 32 IDROKIT VERT waterproof film................................................p. 32 IDROKIT VERT vertical drainage kit.........................................p. 32 IDROKIT FRONT horizontal drainage kit.....................................p. 32 RETE AR160 fibreglass reinforcement mesh.......................p. 32

ACCESSORIES FOR INSTALLATION OF CERAMIC AND STONE MATERIALS EXPANSION JOINT...........................................p. 33 EDGING PROFILE.............................................p. 33 DRIP MOULDING..............................................p. 33

ACCESSORIES FOR ceramic and terracotta tiles cleaning ACID CLEANER.................................................p. 33

ADHESION PROMOTERS AND CONSOLIDATORS FOR SCREEDS TLTX acrylic primer and strengthening latex...........p. 33

ACCESSORIES FOR IDROTASS WATERPROOFING SYSTEM

IDROBAND

IDROBAND is a sealing tape with impermeable surface made of highly flexible India rubber, coupled with non-woven fabric on both sides.

IDROFOLIO

IDROFOLIO is an impermeable insulating polyethylene film, approx. 0,5 mm thick, coupled with non-woven fabric.

IDROKIT VERT

IDROKIT VERT is a vertical drainage kit complete with swivel assembly on the body of the duct with DN50 coupling horizontal as well as vertical.

IDROKIT FRONT

IDROKIT FRONT is an outlet tube for horizontal drainage made of TPE ideal for balconies and terraces.

RUBBERIZED sealing tape

IMPERMEABLE FILM

VERTICAL DRAINAGE KIT

HORIZONTAL DRAINAGE KIT

RETE AR160

FIBREGLASS REINFORCEMENT MESH

Fibreglass reinforcement mesh weighing 150 g/mÂ˛ (+-5%), for application coupled with IDROTASS in the presence of substrates with crackling due to hydraulic shrinkage, subject to thermal deformation and static settling. Mesh width 1.10 m, length 50 m. RETE AR160 is supplied wound around a cardboard tube and wrapped in polyethylene.

REFER TO THE TECHNICAL DATA SHEET FOR COMPLETE INFORMATION REGARDING THE FIELD OF USE, METHOD OF USE AND WARNINGS.

ACCESSORIES FOR INSTALLATION OF CERAMIC AND STONE MATERIALS

EXPANSION JOINT

PVC expansion joint for laying with adhesives, available in two shades of grey and widths 5 and 8 mm.

EDGING PROFILE

Edging profiles for balconies, made of aluminium with grey/brown powder coating or natural. Length 3.

DRIP MOULDING

Edging profiles with drip sill for balconies, made of aluminium with grey/brown powder coating or natural. Length 3m.

Accessories for the cleaning of ceramic and fired tiles

ACID CLEANER

Acid-based cleaning solution to clean lime or cement stains/rings and salt efflorescence from ceramic tiles, mosaic, fired tiles. To be used both on floors and walls, indoor and outdoor. PACKAGING: 5l can

PRIMER AND STRENGTHENING AGENTS FOR FLOOR SCREEDS TECHNICAL CHARACTERISTICS: TLXT is a special acrylic emulsion in water, resistant to alkalis and atmospheric agents, compatible with air and hydraulic binders normally used in building constructions (air lime, hydraulic lime, cement, etc.).

TLTX

ACRYLIC PRIMER AND STRENGTHENING LATEX TLTX

FIELD OF APPLICATION: TLXT is suitable for the preparation of fixative primers and strengthening primers on floor screeds to increase the priming capacity, elasticity, abrasion resistance of other installation materials such as smoothing, levelling, top coats and adhesives. ADVANTAGES: - free from organic solvents - versatile APPLICATION: TLXT can be applied using a roller or brush on any clean and dry surface. When added to plastering mortars it does not modify the usual processing methods of the related products. YIELD: approx. 0.2litres/mÂ˛ CONSUMPTION WHEN ADDED TO PLASTERING MORTAR: up to 5% on dry material PACK SIZE: 5l can

REFER TO THE TECHNICAL DATA SHEET FOR COMPLETE INFORMATION REGARDING THE FIELD OF USE, METHOD OF USE AND WARNINGS.

5 - RECOMMENDATIONS FOR APPLICATION

Floor system with slab made of concrete and masonry.................................p. 36 Floor system on concrete bed.........................p. 36 Shower stall protection system.......................p. 36 Terraces and balconies flooring system................................................p. 37 Laying large sized tiles on radiant floor ...............................................p. 37 laying stone material of vertical surfaces..........................................p. 37 Screed with expansion or distribution joint..........................................p. 38 Screed with radiant heating............................p. 39 Laying tiles on cracked floor screed...............p. 40 Laying tiles on tiles..........................................p. 41 Repairing tiles on crackled floor screed..................................p. 42 Replacing tiles on localised restoration of floor screed..................................................p. 43 Using adhesives...............................................p. 44

RECOMMENDATIONS FOR APPLICATION

FLOORING SYSTEM WITH FLOOR MADE OF CONCRETE AND MASONRY T-FIX

T48S/N

NOISE-PROOF SHEATH FLOOR MADE OF CONCRETE AND MASONRY

PAVI/1

FLOORING SYSTEM ON CONCRETE BED FUGATASS/XS T-FIX FLEX

FLOOR SCREED

FLOOR HEATING SYSTEM

PAVI/1 IDROTASS MONOTECH

CONCRETE BED

SHOWER STALL PROTECTION SYSTEM

TLTX (strengthening plaster if necessary)

FUGATASS/XS

IDROKIT VERT IDROBAND T-FIX FLEX MASSETTO

IDROTASS

RECOMMENDATIONS FOR APPLICATION

FLOORING SYSTEM FOR TERRACES AND BALCONIES IDROBAND

DRIP MOULDING FUGATASS/L T-FIX IE IDROTASS

Laying large sized tiles on radiant floor

FUGATASS/S

EXPANSION JOINT

T-FIX HP FLEX

LAYING STONE MATERIAL ON VERTICAL SURFACES

T-FIX HP

RECOMMENDATIONS FOR APPLICATION

SCREED WITH EXPANSION OR DISTRIBUTION JOINT STRUCTURE TYPE: TASSULLO Package for preparing civil screed against noise impact. DETAIL:

Laying tiles where expansion or distribution joints of base floor screed are present.

APPLICATION CYCLE

NOTES REGARDING CYCLE

1. Installation of lightened TASSULLO PAVI/1 floor screed at least 5 cm thick on floor. The screed must adequately enclose the technical installations and offer a homogeneous surface for the PE underlay.

1. Noise reduction (DELTA LW) of the system to 25 dB.

2. Laying the closed cell double density 10mm thick PE underlay.

3. Refer to the individual technical data sheets of the products for the methods and warnings regarding application.

3. Laying the TASSULLO ready-to-use floor screed (Massetto, Tecnomass, T48S/N) more than 4 cm thick, with the function of supporting the stone or ceramic finishing layer. 4. Positioning the expansion or distribution joint at the joint present in the civil floor screed and fixing it using TASSULLO TFIX FLEX or TFIX HP adhesive. 5. Laying ceramic or stone tiles (single-fired, glazed porcelain, etc.) with TASSULLO TFIX FLEX or TFIX HP FLEX adhesive and grouting joints with FUGATASS.

2. Using the joint allows reciprocal movement of the distribution of the screed without risk of cracking of the tiles.

RECOMMENDATIONS FOR APPLICATION

FLOOR SCREED WITH RADIANT HEATING STRUCTURE TYPE: TASSULLO Package for preparing civil floor screed against noise impact with radiant system. DETAIL:

Laying tiles where expansion or distribution joints of base floor screed are present.

APPLICATION CYCLE 1. Installation of lightened TASSULLO PAVI/1 floor screed at least 5 cm thick on floor. The screed must adequately enclose the technical installations and offer a homogeneous surface for the PE underlay. 2. Laying the closed cell double density 10mm thick PE underlay. 3. Installation of the floor radiant system a pavimento followed by casting TASSULLO ready-to-use screed (Massetto, Tecnomass, T48S/N) more than 4 cm thick, with the function of thermal transmission with complete sinking of radiant tubes.

NOTES REGARDING CYCLE 1. Lightened screed must be used to ensure adequate thermal insulation and create the “mass - spring - mass” system underlying the reduction of noise impact. 2. Noise reduction (DELTA LW) of the system to 25 dB. 3. Use of TASSULLO flexible adhesives is the most appropriate choice for reducing risk of transmission of stresses due to the radiant system with ceramic or stone covering. 4. Refer to the individual technical data sheets of the products for the methods and warnings regarding application.

4. Laying ceramic or stone tiles (single-fired, glazed porcelain, etc.) with TASSULLO TFIX FLEX or TFIX HP FLEX adhesive and grouting joints with FUGATASS.

RECOMMENDATIONS FOR APPLICATION

LAYING TILES ON CRACKLED FLOOR SCREED STRUCTURE TYPE: Laying stone or ceramic flooring on cement floor screed. DETAIL:

Laying tiles with crackling present in the base floor screed.

APPLICATION CYCLE

NOTES REGARDING CYCLE

1. Clean the base floor screed to remove dust, adhesive residues and all inconsistent parts.

1. Make sure the cracks in the screed are stable and no longer subject to evolution or cyclic movements.

2. Place the TASSULLO ARINT reinforcement mesh or TASSULLO AR160 mesh spanning across the cracks in the existent screed.

3. Refer to the individual technical data sheets of the products for the methods and warnings regarding application.

3. Integrative extremely thin smoothing coat sunken into the mesh using TASSULLO TFIX FLEX or TFIX HP FLEX or TASSULLO TLIVEL adhesive. 4. Laying ceramic or stone tiles (single-fired, glazed porcelain, etc.) using TASSULLO TFIX FLEX or TFIX HP FLEX adhesive and grouting joints with FUGATASS.

RECOMMENDATIONS FOR APPLICATION

LAYING TILES ON TILES STRUCTURE TYPE: New stone or ceramic flooring on existent screed (without removing the old tiles). DETAIL:

Laying new tiles on existent tiles.

APPLICATION CYCLE

NOTES REGARDING CYCLE

1. Cleaning the existent tiles to remove dust, organic material, saline efflorescence and evaluation of adhesion of the tiles to the screed.

1. Ensure by means of suitable profiles that the additional screed and ceramic or stone covering remain detached from the perimeter walls (i.e. is not flush with the plaster).

2. Application using a brush, roller or by spraying of TASSULLO primer as fixative of substrate, adhesion and water absorption levelling layer.

2. Ensure that there is no air circulation inside the rooms by shutting the windows and doors for the initial 24-48 hours after the additional screed is laid.

3. Laying TASSULLO TLIVEL integrative screed in 1 to 10 mm thick layer or TASSULLO TLIVEL MAXI in 3 to 30 mm thick layer with the function of supporting the new stone or ceramic finish.

3. Refer to the individual technical data sheets of the products for the methods and warnings regarding application.

4. Laying ceramic or stone tiles (single-fired, glazed porcelain, etc.) with TASSULLO TFIX FLEX or TFIX HP FLEX adhesive and grouting joints with FUGATASS.

RECOMMENDATIONS FOR APPLICATION

REPLACING TILES ON IRREGULAR CRACKLED FLOOR SCREED STRUCTURE TYPE: Restoration of stone or ceramic flooring on existent uneven crackled cemen floor screed after removing old tiles.

DETAIL:

Laying tiles with crackling present in the base floor screed.

APPLICATION CYCLE 1. Clean the base floor screed to remove dust, adhesive residues and all inconsistent parts. 2. Place the TASSULLO ARINT reinforcement mesh or TASSULLO AR160 mesh spanning across the cracks in the existent screed. 3. Laying TASSULLO TLIVEL (1 to 10 mm) or TASSULLO TLIVEL MAXI (3 to 30 mm) additional screed in an extremely thin layer with the function of supporting the new stone or ceramic finishing layer. In the first case it is advisable to use it in combination with TASSULLO AR160 mesh weighing approx. 150 g/m2, while in the second case combination with TASSULLO ARINT mesh weighing approx. 300 g/m2 is recommended. 4. Laying ceramic or stone tiles (single-fired, glazed porcelain, etc.) with TASSULLO TFIX FLEX or TFIX HP FLEX adhesive and grouting joints with FUGATASS.

NOTES REGARDING CYCLE 1. If, after removal of the tiles, the existent screed is found to be free of adhesive residues and there is therefore no need for an extremely thin layer of additional screed, the TASSULLO AR160 mesh can be applied spanning the screed joint or the crack caused by shrinkage using TASSULLO TFIX FLEX or TFIX HP FLEX adhesive recommended for gluing the tiles. 2. Ensure that there is no air circulation inside the rooms by shutting the windows and doors for the initial 24-48 hours after the additional screed is laid. 3. Refer to the individual technical data sheets of the products for the methods and warnings regarding application.

RECOMMENDATIONS FOR APPLICATION

REPLACING TILES ON LOCALISED RESTORATION OF SCREED STRUCTURE TYPE: Restoration of stone or ceramic flooring on existent cement screed after removing old tiles. DETAIL:

Laying tiles with partial reintegration of base screed.

NOTES REGARDING CYCLE 1. If, after removal of the tiles, the existent screed is found to be free of adhesive residues and there is therefore no need for an extremely thin layer of additional screed, the TASSULLO AR160 mesh can be applied spanning the screed or the crack caused by shrinkage using TASSULLO TFIX FLEX or TFIX HP FLEX adhesive recommended for gluing the tiles. 2. Ensure that there is no air circulation inside the rooms by shutting the windows and doors for the initial 24-48 hours after the additional screed is laid. 3. Refer to the individual technical data sheets of the products for the methods and warnings regarding application.

4. Laying ceramic or stone tiles (single-fired, glazed porcelain, etc.) with TASSULLO TFIX FLEX or TFIX HP FLEX adhesive and grouting joints with FUGATASS.

CONSIGLI PER L’APPLICAZIONE COLLANTI GRIGI E BIANCHI IN RELAZIONE AL TIPO DI SUPPORTO E DI PIASTRELLA ADHESIVES USE SYNOPTIC SURFACE

TYPE OF TILE

SINGLE-FIRED DOUBLE-FIRED PORECELAIN clinker STONEWARE

HYDRAULIC BINDER-BASED PLASTERS FOR INTERIORS

T-FIX

T-FIX IE

HYDRAULIC BINDER-BASED PLASTERS FOR EXTERIORS

T-FIX IE

T-FIX HP

HYDARULIC BINDER-BASED FLOOR SCREED FOR INTERIORS

T-FIX

T-FIX IE

SELF-LEVELLING CEMENT FLOOR SCREED FOR INTERIORS

T-FIX FLEX

FLOOR SCREED FOR EXTERIORS

T-FIX IE

T-FIX HP

CONCRETE

T-FIX IE

T-FIX HP

PLASTERBOARD (AFTER TLTX)

T-FIX FLEX

T-FIX HP FLEX

EXISTENT TILES (AFTER APPLYING TLTX PRIMER)

T-FIX FLEX

T-FIX HP FLEX

idrotass

T-FIX IE

T-FIX HP

SWIMMING POOLS WELLNESS CENTRES

T-FIX HP FLEX

HYDRAULIC BINDER BASED SCREED WITH HEATING

T-FIX FLEX

PLASTER CONTAINING HYDRAULIC BINDERS WITH HEATING

T-FIX FLEX

ELASTIC SURFACES (SLABS)

T-FIX FLEX

T-FIX HP FLEX

PORCELAIN STONES STONEWARE MOSAIC

MARBLE VITREOUS BONDED MOSAIC MOSAIC CEMENT

MAXI SIZES

T-FIX HP

T-FIX HP/bn

T-FIX HP

T-FIX FLEX

T-FIX HP FLEX

T-FIX HP FLEX/bn

T-FIX HP FLEX

T-FIX HP

T-FIX HP/bn

T-FIX HP

T-FIX FLEX

T-FIX FLEX/bn

T-FIX FLEX

T-FIX HP FLEX

T-FIX HP FLEX/bn

T-FIX HP FLEX

T-FIX HP

T-FIX HP/bn

T-FIX HP

T-FIX HP FLEX

T-FIX HP FLEX/bn

T-FIX HP FLEX

T-FIX HP FLEX/bn

T-FIX HP FLEX

T-FIX HP

T-FIX HP/bn

T-FIX HP

T-FIX HP FLEX

T-FIX HP FLEX/bn

T-FIX HP FLEX

T-FIX FLEX

T-FIX FLEX/bn

T-FIX FLEX

T-FIX HP FLEX

T-FIX FLEX

T-FIX FLEX/bn

T-FIX FLEX

T-FIX HP FLEX

T-FIX HP FLEX/bn

T-FIX HP FLEX

ALPHABETIC INDEX OF PRODUCTS

1 - INSTALLATION OF CERAMIC AND STONE MATERIALS

n BIO-E/FONDO...................................... p. 24 n BIO-E/SOFT......................................... p. 24 n FUGATASS/L........................................ p. 13

2 - PREPARATION OF INSTALLATION BASES

n FUGATASS/S....................................... p. 12 n FUGATASS/XS..................................... p. 12 n GIUNTO DI DILATAZIONE.................... p. 33

3 - WATER PROOFING SYSTEMS

n IDROBAND........................................... p. 32 n IDROFOLIO.......................................... p. 32 n IDROKIT FRONT.................................. p. 32

4 - ACCESSORIES AND COMPLEMENTARY PRODUCTS

n IDROKIT VERT..................................... p. 32 n IDROTASS............................................ p. 28 n IDROTASS EASYTECH......................... p. 29

5 - RECOMMENDATIONS FOR APPLICATION

n IDROTASS MONOTECH........................ p. 29

n MASSETTO.......................................... p. 20

n T-FIX HP.............................................. p. 09

n MIXTO PAVI.......................................... p. 18

n T-FIX HP FLEX.................................... p. 10

n MIXTO PAVI B...................................... p. 18

n T-FIX IE............................................... p. 08

n Mixto pavi r...................................... p. 19

n T-LIVEL............................................... p. 25

n PAVI/1.................................................. p. 20

n T-LIVEL MAXI...................................... p. 25

n PULITORE ACIDO................................ p. 33

n T48S/B................................................. p. 22

n PROFILO DI CHIUSURA....................... p. 33

n T48S/N................................................ p. 22

n PROFILO GOCCIOLATOIO..................... p. 33

n TADP/C................................................ p. 10

n RETE AR160........................................ p. 32

n TECNOMASS........................................ p. 21

n SILICONE NEUTRO.............................. p. 14

n TECNOMASS ULTRARAPIDO............... p. 21

n SILICONE UNIVERSALE...................... p. 14

n TLTX..................................................... p. 33

n T-FIX.................................................... p. 09

n TSL-20................................................. p. 23

n T-FIX FLEX.......................................... p. 09