1 minute read

Planter Walls

be level with the last step. Push/Pull the plaza faces (including the water-feature faces) to match the height of the landing (Fig. 7-34).

Fig. 7-34: Push/Pull the tallest surfaces first.

Advertisement

Planter Walls

Elevate the adjacent planter walls to the same height as the plaza. Push/Pull will “stop” and match the height of any adjacent surfaces. Apply Push/Pull until the desired height is achieved. Additional height will be added to the walls after the next step (Fig. 7-35).

Fig. 7-35: Push/Pull the planter walls to match the plaza surface height.

This article is from: