IDS 60804| Detailing + Working Drawings by Tee Hui Qing (Joyce)

IDS60804 DETAILING + WORKING DRAWINGS

NAME: TEE HUI QING STUDENT ID: 0334497 SEMESTER: 4 LECTURER: MS. NORJI, MS.AZIAH

INDEX ASSIGNMENT 1: ''STEP ON IT'

ASSIGNMENT 2: "COOK + CLEAN IT"

Observe & Measure

As-Built drawings of exisiting

Staircase within place of

conditions of own's cooking &

stay

clean areas at Kitchen &

Week 1- 4 (20%)

Toilet

Individual

Week 5- 8 (30%) Individual

ASSIGNMENT 3: WORKING DRAWINGS + SYSTEM INTEGRATION produce documents with an integration of the building services componets by working together with the design processes Week 5- 8 (40%) Individual

IDS 60804 DETAILING AND WORKING DRAWINGS Assignment 1: Drawing Convention [Step On It] Observation Statements

Name: Tee Hui Qing (Joyce) Student ID: 0334497 Programme: Bachelors of Arts (Honours) Interior Architecture Batch: August 2020 Lecturers: Ms. Norji, Ms. Aziah

2 Quarter Winder Staircase

1) Plan

2) Front View

3) Side Skirting

(2 Step Winder)

4) Blow Up 1Balustrade

5) Blow Up 2Nosing

Construction Method- Concrete â&#x20AC;˘ Construction of Stairs include steps such as designing, preparing foundation, building formwork, placement of reinforcement steel bars, concreting, finishing and curing

Designing of Concrete Stairs

Determining the factors that influence he design of stairs: height of the floor, width of the stairs, risers depth, tread width, thickness of the stairs, angle of the stairs, load applied on the stairs

Component

Standard Dimension

Tread Length

900mm

Rise

150mm

Run

270mm

Flight Angle

30Â°

2. Foundation and Support for Concrete Stairs Connect reinforcement steel bars to plinth beam at the beginning of stairs or small concrete foundation to transfer the load. Support is constructed on the roof beam or slab. 3. Building the Form-work for concrete stairs Proper formwork including the angle of flight (30Â°), dimensions of tread (270mm) and riser (150mm) are checked. Line of flight, tread and risers are marked on the wall when stairs are constructed to be attached to the wall. This is meant for accurate fixing of formwork.

4. Steel Reinforcement for Concrete Stairs

In order for the staircase to carry huge loads, reinforcement steel bars are placed with minimum of 25 mm spacing and is tied together

5. Pouring of Concrete for Stairs Standard mix of concrete for stairs are cement, sand, gravel in the ratio of 3:2:4 with water. Usage of concrete vibrator is recommended to avoid honeycomb formation.

6. Removal of Formwork Formwork is removed after 21 days for the stairs to completely dry out. In the drying period, proper curing is done to prevent cracks due to the thermal expansion.

7. Finishing of Concrete Stairs 126mm (L) X 126mm (W) X 7.9mm (THK.) Parquet wood are used as the applied by gluing small finger-joined of wood on 0.3mm DPM layer on the concrete base. Varnish is used as their finishes.

Materials & Finishes Parquet Engineered Wood Flooring in Varnish Finish using glue-down method Glue down 1. Glue-down method is obviously using a layer o adhesive, which is known as mastic onto the subfloor using a trowel similar to mortar that is used in laying ceramic tile 2. The wood strips are then arranged and laid on top of the glue and hammered into place using a rubber mallet 3. Due to the small size pieces, sanding and re-finishing is needed after the glue-down method and a 0.3 mm damp proof membrane (DPM) is needed to create a barrier between the concrete floor and the subfloor in order to prevent the moisture from seeping into the parquet flooring that causes damage to it.

Rules (UBBL) •

•

Headroom between stairs ceiling and base is 2360, which meets the requirement of at least 2m in height to allow enough headroom for users to ascend the stairs without their heads knocking into the ceiling as the standard user height is 1500mm- UBBL By Law 110 (2)

•

150mm rise is the minimum of the height to bring comfort when climbing the stairs and 270mm is the maximum width of tread so that users would have sufficient space to step on the tread and avoid accidentprone incidents.- UBBL By Law106 Flight of stairs is at the pitch of 30 degree as the optimal pitch angle should be between 30 degree and 45 degree to make sure users do not trip over low angle or difficult to climb the steep stairs when the angle is too broad

•

30°

Handrails are at the height of 930mm which meets the minimum height of 900mm so users can hold onto the handrails with comfort for safety.– UBBL By Law 107

Fire Rating measures: Concrete does not burn as well as emitting toxic fumes, thus, they have high degree of fire resistance. Treated parquet engineered wood in varnish finishes prolong the fire resistance as fire retardant varnish for timber is fully tested and certified to BS476 Class 0 spread of flame on timber and BS476 Class 1 spread of flame on timber based products [MDF, Plywood]

References Step-by-Step Concrete Staircase Construction â&#x20AC;˘ Rahman, F. U. (2018, October 25). How to Construct Concrete Stairs? The Constructor. https://theconstructor.org/practical-guide/concrete-stairsconstruction/26064/#:%7E:text=Construction%20of%20concrete%20stairs%20includes,%2C %20concreting%2C%20finishing%20and%20curing.

IDS 60804 DETAILING AND WORKING DRAWINGS

Assignment 1: Drawing Convention [Step On It] CAD Drawings

Name: Tee Hui Qing (Joyce)

Student ID: 0334497 Programme: Bachelors of Arts (Honours) Interior Architecture Batch: August 2020 Lecturers: Ms. Norji, Ms. Aziah

REFLECTION Moreover, the most fascinating part of doing this assignment is to be able to know more about its detailed joinery on how metal are connected to the parquet timber staircase by using concrete base and screws. The metal plates were also welded to form a strong connection and I also found out how the finishes were applied by using the glue down method. In short, it was pretty inspiring to be able to observe and document my first as-built drawings.

ASSIGNMENT 1

The first asssignment, to learn about drawing conventions by documenting the stairs is a brand new experience for me. Despite having to stay at home due to the pandemic, it's fun to examine the staircase of my own stay that I've not taken notice of its detailings before. I've learnt to identity the construction method step by step and also the standard requirements of tread, rise, run and flight angle dimension that are in compliance to the UBBL.

Assignment 2: ‘Cook + Clean It’

Name: Tee Hui Qing (Joyce) Student ID: 0334497 Programme: Bachelors of Arts (Honours) Interior Architecture Module: IDS 60804 Detailing and working drawings Lecturers: Ms. Norji, Ms. Aziah

Table of Content No.

Content

1.0

Introduction

Page

1.1 5 Best View (Photos of Kitchen + attached toilet) 1.2 Description of house type, kitchen & toilet

2.0

General Arrangement Drawings

2-7

2.1 Kitchen + Toilet Layout Plan [indicating location of your kitchen + toilet in the house]

2.2 Two Sections [One at Kitchen + one at the Toilet] [Capture materials used, construction method + joinery, from floor level up to ceiling level]

2.3 One Internal Elevation at the Kitchen [capture appliances, fittings, exhaust fan & electrical points, from floor level up to ceiling level]

2.4 Three Blow Up Details [Two at the Kitchen + One at the Toilet] [Joinery detail of the counter top c/w the sink at the Kitchen, door detail of the cabinet together with the profiles + drawer, blow up details that captures sanitary wares & fittings & its services at the toilet]

3.0

Schedule of Finishes

8-10

[photos, specification (size, materials + finishes)] 3.1 Floor Finishes 3.2 Wall Finishes 3.3 Ceiling Finishes 3.4 Kitchen Cabinets Materials 3.5 Schedule of Kitchen Appliances + Fittings 3.6 Schedule of Sanitary Wares & Fittings

4.0

Building Services

11-13

4.1 Electrical System- photos & specification + quantity 4.2 Lighting System- photos & specification + quality 4.3 Water, Drainage and Plumbing [Single Line Drawing- Indicate the water tank and piping at the kitchen + toilet]

5.0

Conclusion Analyse what could be improved in terms of the technical design of your kitchen & toilet, write your analysis in minimum 500 words

14-17

ALL DIMENSIONS SHOWN ARE TO CROSS CHECK WITH SITE CONDITIONS AND THE CONTRACTORS ARE RESPONSIBLE TO HIGHLIGHT ANY DISCREPANCIES TO THE SUPERVISING ARCHITECT/DESIGNER BEFORE ANY WORK IS CARRIED OUT.

1.0 Introduction 1.1 5 Best View [Photos of Kitchen + Attached toilet]

DATE

NO.

AMENDMENTS

KITCHEN

Front Elevation

Countertop & Sink View

Section View (Kitchen Cabinet)

CONSULTANT: NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

TOILET

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

DRAWING TITLE:

INTRODUCTION

Toilet Sink Section View

SCALE

N/A

DATE

12 OCTOBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

Toilet Overall View

1.2 Description of house type, kitchen and toilet

My site is a double storey terrace house located at Puchong Prima. The kitchen size is 13.14 metre square and has a L shape granite kitchen countertop and white laminated plywood cabinetry. Three toilets are located at the first floor master bedroom, bedroom 2 and beside the kitchen respectively with an area of 2.68 metre square individually.

THIS DRAWING IS COPYRIGHT. All design are the property of MITRAJAYA Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on completion of work. All measurements must be checked at site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjuction with other consultant's drawings. DRAWING NO:

DWG_DWD_THQ_GF_ID_01

ALL DIMENSIONS SHOWN ARE TO CROSS CHECK WITH SITE CONDITIONS AND THE CONTRACTORS ARE RESPONSIBLE TO HIGHLIGHT ANY DISCREPANCIES TO THE SUPERVISING ARCHITECT/DESIGNER BEFORE ANY WORK IS CARRIED OUT.

4256 1570

2086

DATE

1740

NO.

AMENDMENTS

Y 300mm (L) X 300mm (W) X 12.7mm (THK. ) BLUE CERAMIC TILES IN GLAZED FINISH 200mm (L) X 250mm (W) X 12.7mm (THK.) CERAMIC WALL TILES IN GLAZED FINISH

TOILET

300mm (L) X 300mm (W) X 12.7mm (THK.) ORANGE CERAMIC TILES IN GLAZED FINISH

4600

DRY KITCHEN

PROJECT TITLE: TO RECORD EXISTING CONDITION OF KITCHEN AND TOILET AT 19, JALAN PRIMA 2/4 , TAMAN PUCHONG PRIMA, 47150 PUCHONG, SELANGOR.

CONSULTANT: MITRAJAYA SDN. BHD. No. 9, Block D, Pusat Perdagangan Puchong Prima,, Persiaran Prima Utama, Taman Puchong Prima,, 47150 Puchong, Selangor t: 03-8060 9999 e: mhb@mitrajaya.com.my CONSULTANT: NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

DRAWING TITLE:

2260

KITCHEN & TOILET PLAN 3150mm (L) X 545mm (W) X 95mm (THK.) BLACK GRANITE KITCHEN COUNTERTOP IN POLISHED FINISH

SCALE

1:25

DATE

12 OCTOBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

KITCHEN & TOILET PLAN

SCALE 1:25

All measurements must be checked at site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjuction with other consultant's drawings. DRAWING NO:

DWG_DWD_THQ_GF_ID_02

▼ SL

698

▲ CL

2140mm (L) X 110mm (W) X 0.4mm (THK.) ALUMINUM STRIPS IN GREY POWDER COATED FINISH

ALL DIMENSIONS SHOWN ARE TO CROSS CHECK WITH SITE CONDITIONS AND THE CONTRACTORS ARE RESPONSIBLE TO HIGHLIGHT ANY DISCREPANCIES TO THE SUPERVISING ARCHITECT/DESIGNER BEFORE ANY WORK IS CARRIED OUT. DATE

NO.

AMENDMENTS

PROJECT TITLE: TO RECORD EXISTING CONDITION OF KITCHEN AND TOILET AT 19, JALAN PRIMA 2/4 , TAMAN PUCHONG PRIMA, 47150 PUCHONG, SELANGOR. CONSULTANT:

405

MITRAJAYA SDN. BHD. No. 9, Block D, Pusat Perdagangan Puchong Prima,, Persiaran Prima Utama, Taman Puchong Prima,, 47150 Puchong, Selangor t: 03-8060 9999 e: mhb@mitrajaya.com.my CONSULTANT:

3180

NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

645

195

520

CONSULTANT:

SC X

MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

EXISTING BRICK WALL C/W 200mm (L) X 250mm (W) X12.7mm (THK.) CERAMIC WALL TILES IN GLAZED FINISH

DRAWING TITLE:

TOILET SECTION X-X

555mm (L) X 465mm (W) X 200mm (HT.) CERAMIC BASIN 200mm (L) X 200mm (W) X 12.7mm (THK. ) BLUE CERAMIC TILES IN GLAZED FINISH

SCALE

1:10

DATE

12 OCTOBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

SECTION X-X

DRAWING NO:

SCALE 1:10 ▼ FL

DWG_DWD_THQ_GF_ID_03

4599 200

505

910

470

834

470

200

AMENDMENTS

410

DATE

275

VOID

200mm (L) X 250mm (W) X12.7mm (THK.) CERAMIC WALL TILES IN GLAZED FINISH c/w 12mm (THK.) CEMENT 1 MORTAR

315

PROJECT TITLE: TO RECORD EXISTING CONDITION OF KITCHEN AND TOILET AT 19, JALAN PRIMA 2/4 , TAMAN PUCHONG PRIMA, 47150 PUCHONG, SELANGOR.

VOID

CONSULTANT: MITRAJAYA SDN. BHD. No. 9, Block D, Pusat Perdagangan Puchong Prima,, Persiaran Prima Utama, Taman Puchong Prima,, 47150 Puchong, Selangor t: 03-8060 9999 e: mhb@mitrajaya.com.my

VOID CONSULTANT:

NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

700

VOID

3180

VOID

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

20mm PLYWOOD IN WHITE LAMINATED FINISH c/w 5.5mm (THK.) WHITE POLYCHEM 590

3150mm (L) X 545mm (W) X 95mm (THK.) BLACK GRANITE KITCHEN COUNTERTOP IN POLISHED FINISH c/w 75mm (THK.) 1 CONCRETE SLAB

VOID

2140mm (L) X 110mm (W) X 0.4mm (THK.) ALUMINUM STRIPS IN GREY POWDER COATED FINISH c/w ALUMINUM FURRING

KITCHEN SECTION Y-Y

'2' '1'

DRAWING TITLE:

SCALE

1:10

DATE

12 OCTOBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

888

VOID

SC Y

SECTION Y-Y

DRAWING NO:

SCALE 1:10

DWG_DWD_THQ_GF_ID_04

ALL DIMENSIONS SHOWN ARE TO CROSS CHECK WITH SITE CONDITIONS AND THE CONTRACTORS ARE RESPONSIBLE TO HIGHLIGHT ANY DISCREPANCIES TO THE SUPERVISING ARCHITECT/DESIGNER BEFORE ANY WORK IS CARRIED OUT.

2386 400

400

986

3080

698

295

435

200

VOID 600

VOID

876

2140mm (L) X 110mm (W) X 0.4mm (THK.) ALUMINUM STRIPS ▼ SL IN GREY POWDER ▲CL COATED FINISH clw ALUMINUM FURRING 986mm (L) X 295mm (HT.) X 20mm (THK.) PLYWOOD DOOR IN WHITE LAMINATED FINISH c/w 15mm (L) X 20mm (W) ALUMINUM CABINET HANDLE IN VARNISH FINISH 200mm (L) X 250mm (W) X12.7mm (THK.) CERAMIC WALL TILES IN GLAZED FINISH c/w 12mm CEMENT MORTAR

▼FL

ELEVATION A

SCALE 1:20

3150mm (L) X 545mm (W) X 95mm (THK.) BLACK GRANITE KITCHEN COUNTERTOP IN POLISHED FINISH c/w 75mm (THK.) CONCRETE SLAB

DATE

NO.

AMENDMENTS

PROJECT TITLE: TO RECORD EXISTING CONDITION OF KITCHEN AND TOILET AT 19, JALAN PRIMA 2/4 , TAMAN PUCHONG PRIMA, 47150 PUCHONG, SELANGOR.

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

DRAWING TITLE:

ELEVATION A SCALE

1:20

DATE

12 OCTOBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

DWG_DWD_THQ_GF_ID_05

585

65 253

CONSULTANT: MITRAJAYA SDN. BHD. No. 9, Block D, Pusat Perdagangan Puchong Prima,, Persiaran Prima Utama, Taman Puchong Prima,, 47150 Puchong, Selangor t: 03-8060 9999 e: mhb@mitrajaya.com.my

CONSULTANT: NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

253

183

CONSULTANT:

70 183 34

80mm (HT.) CABINET SKIRTING c/w ORANGE CERAMIC TILES IN GLAZED FINISH

DETAIL 1

DETAIL 2

SCALE 1:5

253

715

PROJECT TITLE: TO RECORD EXISTING CONDITION OF KITCHEN AND TOILET AT 19, JALAN PRIMA 2/4 , TAMAN PUCHONG PRIMA, 47150 PUCHONG, SELANGOR.

DRAWING TITLE:

5mm (THK.) STEEL HINGES IN VANISH FINISH c/w SCREW JOINERY 80

AMENDMENTS

MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

20mm ALUMINUM DRAWER SLIDER IN WHITE POWDER COATED FINISH

NO.

DATE

65mm (L) X 8125mm (HT.) X 18mm (THK.) PLYWOOD DOOR FRAME IN WHITE LAMINATED FINISH c/w mm (THK. ) PLYWOOD DOOR STOPPER IN WHITE LAMINATED FINISH

ALL DIMENSIONS SHOWN ARE TO CROSS CHECK WITH SITE CONDITIONS AND THE CONTRACTORS ARE RESPONSIBLE TO HIGHLIGHT ANY DISCREPANCIES TO THE SUPERVISING ARCHITECT/DESIGNER BEFORE ANY WORK IS CARRIED OUT.

183

20mm (THK.) BLACK GRANITE KITCHEN COUNTERTOP IN POLISHED FINISH c/w 45mm (L) X 130mm (W) X 179mm (HT.) STAINLESS STEEL FAUCET 1 65mm CONCRETE SLAB 1 18mm (THK.) STAINLESS STEEL KITCHEN SINK C/W 9mm (W) X 6mm (HT.) STAINLESS STEEL SINK COVER PLATE

BLOW UP DETAIL 1 & 2 SCALE

1: 5

DATE

12 OCTOBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

DWG_DWD_THQ_GF_ID_06

ALL DIMENSIONS SHOWN ARE TO CROSS CHECK WITH SITE CONDITIONS AND THE CONTRACTORS ARE RESPONSIBLE TO HIGHLIGHT ANY DISCREPANCIES TO THE SUPERVISING ARCHITECT/DESIGNER BEFORE ANY WORK IS CARRIED OUT.

200 26

NO.

EXISTING BRICK WALL c/w 200mm (L) X 250mm (W) X 12.7mm (THK.) CERAMIC TILES IN GLAZED FINISH

AMENDMENTS

PROJECT TITLE: TO RECORD EXISTING CONDITION OF KITCHEN AND TOILET AT 19, JALAN PRIMA 2/4 , TAMAN PUCHONG PRIMA, 47150 PUCHONG, SELANGOR.

CONSULTANT:

310

MITRAJAYA SDN. BHD. No. 9, Block D, Pusat Perdagangan Puchong Prima,, Persiaran Prima Utama, Taman Puchong Prima,, 47150 Puchong, Selangor t: 03-8060 9999 e: mhb@mitrajaya.com.my

154

335mm (L) X 335mm (HT.) X 138mm (W) WALL TYPE EXHAUST FAN

CONSULTANT:

565

NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

12mm (L) X 12mm (W) X 517mm (HT.) ALUMINUM GRILL IN BEIGE POWDER COATED FINISH

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

DRAWING TITLE:

580mm (L) X 12mm (W) X 12mm(HT.) ALUMINUM GRILL IN BEIGE POWDER COATED FINISH

BLOW UP DETAIL 3 SCALE

1:5

12 OCTOBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

DETAIL 3

SCALE 1:5

DWG_DWD_THQ_GF_ID_07

ALL DIMENSIONS SHOWN ARE TO CROSS CHECK WITH SITE CONDITIONS AND THE CONTRACTORS ARE RESPONSIBLE TO HIGHLIGHT ANY DISCREPANCIES TO THE SUPERVISING ARCHITECT/DESIGNER BEFORE ANY WORK IS CARRIED OUT.

3.0 Schedule of Finishes

DATE

NO.

AMENDMENTS

3.1 FLOOR FINISHES IMAGES

SPECIFICATION 200mm (L) X 200mm (W) X 12.7mm (THK.) ORANGE CERAMIC TILES IN GLAZED FINISH

LOCATION

KITCHEN

TOTAL AREA

13.14m²

PROJECT TITLE: TO RECORD EXISTING CONDITION OF KITCHEN AND TOILET AT 19, JALAN PRIMA 2/4 , TAMAN PUCHONG PRIMA, 47150 PUCHONG, SELANGOR. CONSULTANT:

200mm (L) X 200mm (W) X 12.7mm (THK.) BLUE CERAMIC TILES IN GLAZED FINISH

TOILET

MITRAJAYA SDN. BHD. No. 9, Block D, Pusat Perdagangan Puchong Prima,, Persiaran Prima Utama, Taman Puchong Prima,, 47150 Puchong, Selangor t: 03-8060 9999 e: mhb@mitrajaya.com.my

2.68m²

CONSULTANT: NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

3.2 WALL FINISHES DRAWING TITLE:

IMAGES

SPECIFICATION 200mm (L) X 250mm (W) X 12.7mm (THK.) CERAMIC TILES IN GLAZED FINISH

200mm (L) X 250mm (W) X 12.7mm (THK.) CERAMIC TILES IN GLAZED FINISH

LOCATION

KITCHEN

TOILET

TOTAL AREA

46.63m²

13.83m²

SCHEDULE OF FINISHES SCALE

N/A

DATE

12 OCTOBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

DWG_DWD_THQ_GF_ID_08

ALL DIMENSIONS SHOWN ARE TO CROSS CHECK WITH SITE CONDITIONS AND THE CONTRACTORS ARE RESPONSIBLE TO HIGHLIGHT ANY DISCREPANCIES TO THE SUPERVISING ARCHITECT/DESIGNER BEFORE ANY WORK IS CARRIED OUT.

3.3 CEILING FINISHES IMAGES

SPECIFICATION 1940mm (L) X 80mm (W) X 4mm (THK.) ALUMINIUM STRIP IN NATURAL FINISH

1740mm (L) X 80mm (W) X 4mm (THK.) ALUMINIUM STRIP IN POLISHED FINISH

LOCATION KITCHEN

TOILET

TOTAL AREA

DATE

NO.

AMENDMENTS

13.14m²

2.68m²

PROJECT TITLE: TO RECORD EXISTING CONDITION OF KITCHEN AND TOILET AT 19, JALAN PRIMA 2/4 , TAMAN PUCHONG PRIMA, 47150 PUCHONG, SELANGOR.

CONSULTANT: MITRAJAYA SDN. BHD. No. 9, Block D, Pusat Perdagangan Puchong Prima,, Persiaran Prima Utama, Taman Puchong Prima,, 47150 Puchong, Selangor t: 03-8060 9999 e: mhb@mitrajaya.com.my

3.2 KITCHEN CABINETS MATERIALS CONSULTANT:

IMAGES

SPECIFICATION 20 mm (THK.) PLYWOOD IN WHITE LAMINATED FINISH

95mm (THK.) BLACK GRANITE KITCHEN COUNTERTOP IN POLISHED FINISH

15mm (L) X 20mm (W) X 85mm (HT.) ALUMINUM CABINET HANDLE IN VARNISH FINISH

60mm (L) X 15mm (W) X 15mm (THK.) ALUMINUM HINGES IN VARNISH FINISH

1.8mm (THK.) LAMINATED GLASS PANEL DOOR

LOCATION

KITCHEN

NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

QUANTITY

APPLIES TO ALL CABINETRY

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

DRAWING TITLE:

SCHEDULE OF FINISHES SCALE

N/A

DATE

12 OCTOBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

DWG_DWD_THQ_GF_ID_09

ALL DIMENSIONS SHOWN ARE TO CROSS CHECK WITH SITE CONDITIONS AND THE CONTRACTORS ARE RESPONSIBLE TO HIGHLIGHT ANY DISCREPANCIES TO THE SUPERVISING ARCHITECT/DESIGNER BEFORE ANY WORK IS CARRIED OUT.

3.5 Schedule of Kitchen Appliances & Fittings IMAGES

DESCRIPTION

QUANTITY

SR-HB184KSK 1H RICE COOKER DIMENSION: APPROX 270mm (L) X 348mm (W) X 232mm (H)

WATT: KEEPING WARM 600W RICE COOKER ELECTROLUX COOKER HOOD EFC926BAR DIMENSION: 875mm (W) X 490mm (H) X 600-890mm (H) HOOD

VOLTAGE: 220-240

ELECTROLUX 70CM BUILT IN CERAMIC HOB EHC7240BAv DIMENSION: 700mm (W) X 420mm (D)

LOAD kW: 3000 HOB HILLESJON INSET SINK (2 BOWLS) DIMENSION: 750mm (L) X 460mm (W) X 180mm (H) SINK

INSERT SINK BASE MATERIAL: STAINLESS STEEL BSUNDSVIK SINGLE- LEVER KITCHEN MIXER TAP, CHROMEPLATED

DIMENSION: 150mm (H) FAUCET SHARP SIDE BY SIDE REFRIGERATOR SHP-SJX508MS DIMENSION: 900mm (W) X 1770mm (H) X 590mm (D) GROSS CAPACITY (L): 600 REFRIGERATOR

SUPPLIER ONKING CHAIN-STORE SDN. BHD. Address: 1 & 3, Jalan Puteri 2/7, Bandar Puteri, 47100 Puchong, Selangor Phone: 016-261 0986 ONKING CHAIN-STORE SDN. BHD. Address: 1 & 3, Jalan Puteri 2/7, Bandar Puteri, 47100 Puchong, Selangor Phone: 016-261 0986 ONKING CHAIN-STORE SDN. BHD. Address: 1 & 3, Jalan Puteri 2/7, Bandar Puteri, 47100 Puchong, Selangor Phone: 016-261 0986 ONKING CHAIN-STORE SDN. BHD. Address: 1 & 3, Jalan Puteri 2/7, Bandar Puteri, 47100 Puchong, Selangor Phone: 016-261 0986 ONKING CHAIN-STORE SDN. BHD. Address: 1 & 3, Jalan Puteri 2/7, Bandar Puteri, 47100 Puchong, Selangor Phone: 016-261 0986 ONKING CHAIN-STORE SDN. BHD. Address: 1 & 3, Jalan Puteri 2/7, Bandar Puteri, 47100 Puchong, Selangor Phone: 016-261 0986

3.6 Schedule of Toilet Sanitary Wares & Fittings IMAGES

DESCRIPTION

QUANTITY

PORTEX ATLANTA WALL HUNG BASIN SXPTX0133 DIMENSION: 555mm (L) X 465mm (W) X 200mm (H)

BASIN

POTEX AMIRA 6L C/C 2C (BO:250MM) WHITE TP3118/318A SXPTX0114

DIMENSION: 355mm (L) X 647mm (W) X 763mm (H) TOILET BOWL PANASONIC WATER HEATER (JET PUMP) DH-3NP2 DIMENSION: 200mm (L) X 89mm (W) X 380mm (HT.) SHOWER

POWER SUPPLY: 240V, 50Hz GOLDLUX 10 INCH WALL TYPE EXHAUST FAN DIMENSION: 335mm (L) X 335mm (W) X 138mm (HT.)

WATT: 38W EXHAUST FAN US WHITE REPLACEMENT TOILET PAPER ROLL HOLDER SPINDLE INSERT SPRING DIMENSION: 200mm (L) X 89mm (W) X 380mm (HT.)

TOILET PAPER HOLDER

GROHE 23337000 BAULOOP BASIN MIXER TAP DIMENSION: 45mm (L) X 130mm (W) X 179mm (HT.) FAUCET

DATE

NO.

AMENDMENTS

SUPPLIER POTEX INDUSTRIES SDN. BHD. Address: No 8B, Jalan SS 21/39, Damansara Utama, 47400 Petaling Jaya, Selangor Phone: 03-7725 1006 POTEX INDUSTRIES SDN. BHD. Address: No 8B, Jalan SS 21/39, Damansara Utama, 47400 Petaling Jaya, Selangor Phone: 03-7725 1006 POTEX INDUSTRIES SDN. BHD. Address: No 8B, Jalan SS 21/39, Damansara Utama, 47400 Petaling Jaya, Selangor Phone: 03-7725 1006 POTEX INDUSTRIES SDN. BHD. Address: No 8B, Jalan SS 21/39, Damansara Utama, 47400 Petaling Jaya, Selangor Phone: 03-7725 1006 POTEX INDUSTRIES SDN. BHD. Address: No 8B, Jalan SS 21/39, Damansara Utama, 47400 Petaling Jaya, Selangor Phone: 03-7725 1006 POTEX INDUSTRIES SDN. BHD. Address: No 8B, Jalan SS 21/39, Damansara Utama, 47400 Petaling Jaya, Selangor Phone: 03-7725 1006

PROJECT TITLE: TO RECORD EXISTING CONDITION OF KITCHEN AND TOILET AT 19, JALAN PRIMA 2/4 , TAMAN PUCHONG PRIMA, 47150 PUCHONG, SELANGOR. CONSULTANT: MITRAJAYA SDN. BHD. No. 9, Block D, Pusat Perdagangan Puchong Prima,, Persiaran Prima Utama, Taman Puchong Prima,, 47150 Puchong, Selangor t: 03-8060 9999 e: mhb@mitrajaya.com.my CONSULTANT: NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

DRAWING TITLE:

SCHEDULE OF FINISHES SCALE

N/A

DATE

12 OCTOBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

DWG_DWD_THQ_GF_ID_10

ALL DIMENSIONS SHOWN ARE TO CROSS CHECK WITH SITE CONDITIONS AND THE CONTRACTORS ARE RESPONSIBLE TO HIGHLIGHT ANY DISCREPANCIES TO THE SUPERVISING ARCHITECT/DESIGNER BEFORE ANY WORK IS CARRIED OUT.

4.0 Building Services

DATE

NO.

AMENDMENTS

4.1 ELECTRICAL SYSTEM IMAGES

DESCRIPTIONS TWO WAY SWITCH FOR 3 DOWNLIGHTS

860mm (L) X 860mm (W) X 9mm (THK.) ONE WAY SWITCH LIGHT SWITCH

AREA KITCHEN

TOILET

QUANTITY

SUPPLIER

1 1

SUM MFG (M) SDN BHD

860mm (L) X 860mm (W) X 9mm (THK.)

3600W 240V WATER HEATER TOILET

860mm (L) X 860mm (W) X 43mm (THK.)

KITCHEN

860mm (L) X 860mm (W) X 9mm (THK.)

TOILET

860mm (L) X 860mm (W) X 43mm (THK.)

SUM MFG (M) SDN BHD

CONSULTANT: NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

WATER HEATER SWITCH

RECEPTACLE (OUTLET)

SUM MFG (M) SDN BHD

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

2 DRAWING TITLE:

BUILDING SERVICES

4.2 LIGHTING SYSTEM IMAGES

DOWNLIGHT

DESCRIPTIONS PHILIPS12WBLED DOWNLIGHT (WARM WHITE) DIMENSION: 140mm (L X 140mm (W) X 26mm (H) WATT: 12W

AREA

KITCHEN + TOILET

QUANTITY 3 1

SUPPLIER HOUSES LIGHTING SDN. BHD.

SCALE

N/A

DATE

12 OCTOBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

DWG_DWD_THQ_GF_ID_11

NO.

AMENDMENTS

LEGEND SYMBOL DESCRIPTION DOWNLIGHT

E SINGLE RECEPTACLE OUTLET

1311

648

TOILET

1283

982

925

S2 E

HOB

PROJECT TITLE: TO RECORD EXISTING CONDITION OF KITCHEN AND TOILET AT 19, JALAN PRIMA 2/4 , TAMAN PUCHONG PRIMA, 47150 PUCHONG, SELANGOR.

KITCHEN SWITCH CONSULTANT: MITRAJAYA SDN. BHD. No. 9, Block D, Pusat Perdagangan Puchong Prima,, Persiaran Prima Utama, Taman Puchong Prima,, 47150 Puchong, Selangor t: 03-8060 9999 e: mhb@mitrajaya.com.my

TOILET SWITCH

EXHAUST FAN CONSULTANT:

DRY KITCHEN 1381

NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

1582

1283

H CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

S1 1499

DRAWING TITLE:

BUILDING SERVICES SCALE

1:25

DATE

12 OCTOBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

ELECTRICAL PLAN

SCALE 1:25

DWG_DWD_THQ_GF_ID_12

LEGEND

4.3 WATER, DRAINAGE AND PLUMBING SYSTEM

SYMBOL DESCRIPTION H

WATER HEATER

WASH BASIN

NO.

AMENDMENTS

SINK 2 STORIES VALVE TAP

3 NOS 400 GALLONS WATER STORAGE TANK (SIRIM APP) ON CONCRETE PLINTH SUPPORT TO ENGR'S DETAIL (C/W MOSQUITO NETTING)

PROJECT TITLE: TO RECORD EXISTING CONDITION OF KITCHEN AND TOILET AT 19, JALAN PRIMA 2/4 , TAMAN PUCHONG PRIMA, 47150 PUCHONG, SELANGOR.

METER CONSULTANT:

MITRAJAYA SDN. BHD. No. 9, Block D, Pusat Perdagangan Puchong Prima,, Persiaran Prima Utama, Taman Puchong Prima,, 47150 Puchong, Selangor t: 03-8060 9999 e: mhb@mitrajaya.com.my

WATER CLOSET

▼SL CONSULTANT:

NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

38mmø UPVC SCOUR PIPE

20mmø STOP COCK 1800mm HT. FROM GROUND LEVEL

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

DRAWING TITLE:

BUILDING SERVICES H

SCALE

N/A

DATE

12 OCTOBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

▼GL KITCHEN

25mmø STAINLESS STEEL INCOMING PIPE FROM WATER MAIN SYABAS

TOILET

TOILET THIS DRAWING IS COPYRIGHT. All design are the property of MITRAJAYA Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on completion of work. All measurements must be checked at site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjuction with other consultant's drawings. DRAWING NO:

DWG_DWD_THQ_GF_ID_13

ALL DIMENSIONS SHOWN ARE TO CROSS CHECK WITH SITE CONDITIONS AND THE CONTRACTORS ARE RESPONSIBLE TO HIGHLIGHT ANY DISCREPANCIES TO THE SUPERVISING ARCHITECT/DESIGNER BEFORE ANY WORK IS CARRIED OUT.

5.0 Conclusion

DATE

IMAGES

NO.

AMENDMENTS

ANALYSIS The dry kitchen is connected to the wet kitchen which has two openings at each end which allows natural lighting and ventilation into the kitchen area in compliance to Act 39. (1) that requires every residential room to have at least one window or opening that allows uninterrupted ventilation of not less than 5% of the floor area. PROJECT TITLE: TO RECORD EXISTING CONDITION OF KITCHEN AND TOILET AT 19, JALAN PRIMA 2/4 , TAMAN PUCHONG PRIMA, 47150 PUCHONG, SELANGOR. CONSULTANT: MITRAJAYA SDN. BHD. No. 9, Block D, Pusat Perdagangan Puchong Prima,, Persiaran Prima Utama, Taman Puchong Prima,, 47150 Puchong, Selangor t: 03-8060 9999 e: mhb@mitrajaya.com.my CONSULTANT:

The total area for kitchen and toilet are 13.14 metre squares and 4.3 metre squares respectively, which complies to Act 42. (3) that requires the kitchen area to meet the requirement of having at least 4.5 square metres while the toilet area to meet the requirement of having more than 1.5 square metres.

NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

DRAWING TITLE:

CONCLUSION The water closet dimension in the bathroom is 355mm (L) X 647mm (W) X 763mm (H) in compliance with Act 43. (c) that requires all sizes of laterines, water-closets and bathrooms in all buildings to be at least 1.5 square metres length and at least 0.75 metre width.

SCALE

N/A

DATE

12 OCTOBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

DWG_DWD_THQ_GF_ID_14

IMAGES

NO.

AMENDMENTS

ANALYSIS

The height of the suspended ceiling to the floor level in the bathroom is 3.18 metres which complies to Act 44. (c) that requires bathrooms in residential buildings to reach the minimum height of 2 metres. PROJECT TITLE: TO RECORD EXISTING CONDITION OF KITCHEN AND TOILET AT 19, JALAN PRIMA 2/4 , TAMAN PUCHONG PRIMA, 47150 PUCHONG, SELANGOR. CONSULTANT: MITRAJAYA SDN. BHD. No. 9, Block D, Pusat Perdagangan Puchong Prima,, Persiaran Prima Utama, Taman Puchong Prima,, 47150 Puchong, Selangor t: 03-8060 9999 e: mhb@mitrajaya.com.my CONSULTANT: NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

The height of suspended ceiling to the floor level in the kitchen is 3.18 metres, which complies to Act 44. (b) that states the minimum height of kitchen area to be not less than 2 metres. DRAWING TITLE:

CONCLUSION SCALE

N/A

DATE

12 OCTOBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

DWG_DWD_THQ_GF_ID_15

IMAGES

NO.

AMENDMENTS

ANALYSIS

The party wall between the kitchen and toilet is 200mm which complies to Act 86. (1) which mentioned that all solid masonry or insitu concrete party walls should not be less than 200mm in total thickness or another scenario, provided that the terrace house has a reinforced concrete or of protected steel frame construction, the party wall is allowed to be not less than 100mm thickness.

The kitchen has a cooker and also located in a residential building so it is not compulsory to have a fireplace , flues or chimney, in compliance with Act 100. (2) which stated that there is no requirement for such facilities if the residential building has appliances like electric or oil cookers for cooing purposes, as specified in by-law 99 gas.

NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

DRAWING TITLE:

The door connecting the dry kitchen and wet kitchen is a fire door that complies to the Act 162. (2) that requires a fire door at the openings in compartment walls and separating walls in accordance with the requirements for that wall specified in the Ninth Schedule to these By-laws.

CONCLUSION SCALE

N/A

DATE

12 OCTOBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

DWG_DWD_THQ_GF_ID_16

IMAGES

NO.

AMENDMENTS

ANALYSIS

The size of the fire door connecting the dry kitchen and wet kitchen is 900mm (W) X 2100mm (HT.), constructed of solid hardwood core of at least 37mm laminated with adhesives such as B5 745 "Animal Glues" and faced both sides with a plywood of at least 43mm thickness with solid edge strip finished edges that are the full width of the door, as in accordance to Act 163.

Two separated exits for the kitchen are placed at the end of dry kitchen (beside the kitchen sink) towards the final exit door at the wet kitchen and entrance where it leads to the living room as well, which complies to the Act 166. (1) that requires two separate exits as permitted by by-law 167.

NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

DRAWING TITLE:

CONCLUSION Existing

Propose

White colour granite kitchen countertop is proposed because the bright colour helps to brighten up the kitchen and gives out a clean and minimalist feel, compared to black granite countertop that causes the overall kitchen to be dull. Furthermore, dust is apparently more obvious on black granite kitchen countertop due to the nature of the dust, which is white in colour, which leads to displease and dissatisfaction of the overall kitchen design. Granite is opted back because it is durable, scratch resistant and high resistance to heat which lowers the fire accident rate.

SCALE

N/A

DATE

12 OCTOBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

DWG_DWD_THQ_GF_ID_17

REFLECTION Compared to the toilet, I spent a lot of time figuring out the dimensions and joinery details as it invloves a lot of built-ins such as the kitchen countertop and cabinets. Many researches are needed to be done especially drawing out the detail blow ups. Besides the drawings, it's also crucial to document the finishes, appliances and building services as well so we know how the area functions, typically the water supply system. I'm also relieved that I'm able to identify the required UBBL that are involved while designing the kitchen.

ASSIGNMENT 2

The second assignment was a bit challenging as we need to work on a wider range of areas: kitchen and toilet. Having to draw out the plans, sections and elevations in different scales, even the documation format is tricky since we need to arrange the drawings as well as the specifications properly with standardised text size, leader size and etc. This assignment truly improves my skills in phrasing the specifications in detail and managing the appropriate line thicknesses through pen asssignments.

Assignment 3: Working Drawings + System Integration

Name: Tee Hui Qing (Joyce) Student ID: 0334497 Programme: Bachelors of Arts (Honours) Interior Architecture Module: IDS 60804 Detailing and working drawings Lecturers: Ms. Norji, Ms. Aziah

Drawing Sheet List Sec. A

Content Cover Page [Project Title, Module Details + Studentâ&#x20AC;&#x2122;s Information]

Drawings i. ii. iii. iv. v. vi.

Drawing Number

Drawing Sheet List Setting Out Plan Furniture Layout Plan Reflected Ceiling Plan Floor Finishes Plan Section Drawing (on A2 size format)

DWG_DWD_THQ_GF_ST_01 DWG_DWD_THQ_GF_FP_02 DWG_DWD_THQ_GF_RCP_03 DWG_DWD_THQ_GF_FFP_04 DWG_DWD_THQ_GF_SC_05

Other Documents i.

Be-spoke Detail: Flexible Stall Design Proposal [Plan, Front Elevation, Section, 1 Detail Blow up, 1 3D View]

ii. Bills of Quantities (BQ)- bespoke/flexible stall iii. Single Line Drawing- Water Supply

DWG_DWD_THQ_GF_FS_06a DWG_DWD_THQ_GF_FS_06b DWG_DWD_THQ_GF_FS_06c DWG_DWD_THQ_GF_FS_06d DWG_DWD_THQ_GF_FS_06e DWG_DWD_THQ_GF_BQ_07 DWG_DWD_THQ_GF_WS_08

NO.

AMENDMENTS

36779 7575

3007

3000

3000 4758

15446

3000

4554

2180

4470 12371

4211

PROJECT TITLE: TO PREPARE SELECTED WORKING DRAWINGS REQUIREMENTS FOR PROPOSED INTERIOR DESIGN WORK (SELECTED AREA- MARKET HALL) FROM DESIGN STUDIO

A X

CONSULTANT:

2200 3400mm (HT.) X 100mm (THK.) FULL HEIGHT BRICK WALL IN WHITE PAINT FINISH

900mm (L) X 2100mm (HT.) SINGLE SWING GLASS TEMPERED DOOR c/w 50mm STAINLESS STEEL HINGES

B FAMILY FUN PRINTING

MONOPRINT CONTEST

7260

D1 1200

ARTISAN WORKSHOP

3558

1200

MITRAJAYA SDN. BHD. No. 9, Block D, Pusat Perdagangan Puchong Prima,, Persiaran Prima Utama, Taman Puchong Prima,, 47150 Puchong, Selangor t: 03-8060 9999 e: mhb@mitrajaya.com.my

200

BEGINNER'S TOUCH

3005 W1

1200

CONSULTANT:

NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

C D1

D DWG_DWD_THQ_GF_FP_02 HALL OF FAME

COLLECTOR RETAIL

CONSULTANT:

LEGEND SYM

DESCRIPTION

MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

QTY

DOOR

1800 D2

E D2

1200mm (L) X 2100mm (HT.) DOUBLE SWING GLASS TEMPERED DOOR c/w 50mm STAINLESS STEEL HINGES IN POLISH FINISH

1800mm (L) X 2100mm (HT.) DOUBLE SWING GLASS TEMPERED DOOR c/w 50mm STAINLESS STEEL HINGES IN POLISH FINISH

DRAWING TITLE:

SETTING OUT PLAN

WINDOW W1

SETTING OUT PLAN- ZONE A GROUND FLOOR

SCALE 1:150

2200mm (L) X 2100mm (HT.) GLASS TEMPERED DOOR c/w 50mm STAINLESS STEEL WINDOW FRAME IN POLISHED FINISH

3400mm (HT.) X 150mm (THK.) FULL HEIGHT BRICKWALL IN WHITE PAINT FINISH

1:150

DATE

30 NOVEMBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

WALL & PARTITION P1

SCALE

DWG_DWD_THQ_GF_ST_1

ALL DIMENSIONS SHOWN ARE TO CROSS CHECK WITH SITE CONDITIONS AND THE CONTRACTORS ARE RESPONSIBLE TO HIGHLIGHT ANY DISCREPANCIES TO THE SUPERVISING ARCHITECT/DESIGNER BEFORE ANY WORK IS CARRIED OUT.

7575

DATE

NO.

AMENDMENTS

C PROJECT TITLE: TO PREPARE SELECTED WORKING DRAWINGS REQUIREMENTS FOR PROPOSED INTERIOR DESIGN WORK (SELECTED AREA- MARKET HALL) FROM DESIGN STUDIO

2225

LF1

CONSULTANT: MITRAJAYA SDN. BHD. No. 9, Block D, Pusat Perdagangan Puchong Prima,, Persiaran Prima Utama, Taman Puchong Prima,, 47150 Puchong, Selangor t: 03-8060 9999 e: mhb@mitrajaya.com.my

D CONSULTANT:

LF2 LF1

NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

LEGEND SYM

DESCRIPTION

QTY

LOOSE FURNITURE

6750

HALL OF FAME

COLLECTOR RETAIL

LF1

LF1 LF2

3000mm (L) X 2762mm (W) X 2900mm (HT.) CHENGAL WOOD FRAME IN SHELLAC FINISH c/w 450mm (L) X 2200mm (HT.) X 50mm (THK.) CHENGAL CURVY CABINET SIDE PANELS IN SHELLAC FINISH c/w 90mm (L) X 2200mm (HT.) X 50mm (THK.) CHENGAL STRIPS IN SHELLAC FINISH

1660mm (L) X 980mm (HT.) X 700mm (THK.) CASHIER COUNTER IN WHITE LAMINATED FINISH c/w 50mm (DIA) CHENGAL RODS FRONT DECOR IN SHELLAC FINISH

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

DRAWING TITLE:

FURNITURE LAYOUT PLAN SCALE

1:50

DATE

30 NOVEMBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

E FLP 2

FURNITURE LAYOUT PLAN- COLLECTOR RETAIL

SCALE 1:50 DWG_DWD_THQ_GF_FP_02

ALL DIMENSIONS SHOWN ARE TO CROSS CHECK WITH SITE CONDITIONS AND THE CONTRACTORS ARE RESPONSIBLE TO HIGHLIGHT ANY DISCREPANCIES TO THE SUPERVISING ARCHITECT/DESIGNER BEFORE ANY WORK IS CARRIED OUT.

DATE

AMENDMENTS

3700

1850

NO.

1850

1000

2250

1000

12 mm (THK.) GYMSUM BOARD IN WHITE PAINT FINISH

CONSULTANT:

3100mm Ht.

MITRAJAYA SDN. BHD. No. 9, Block D, Pusat Perdagangan Puchong Prima,, Persiaran Prima Utama, Taman Puchong Prima,, 47150 Puchong, Selangor t: 03-8060 9999 e: mhb@mitrajaya.com.my

1000

E 1000

1000

CONSULTANT:

SELECTED 120mm (DIA) DOWN LIGHT

1000

COLLECTOR RETAIL

1000

FS 1000

HALL OF FAME

DESCRIPTION

QTY 14

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

7400

1000

6750

7400

NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

LEGEND SYM

PROJECT TITLE: TO PREPARE SELECTED WORKING DRAWINGS REQUIREMENTS FOR PROPOSED INTERIOR DESIGN WORK (SELECTED AREA- MARKET HALL) FROM DESIGN STUDIO

S2 S1

DOWN LIGHT ONE WAY SWITCH

CASETTE AIR-COND

EXIT

GREEN FACE LUMINOUS EXIT SIGN

FIRE SPRINKLER

SMOKE DETECTOR

EMERGENCY LIGHTING

DRAWING TITLE:

EXIT

C RCP

REFLECTED CEILING PLAN- COLLECTOR RETAIL

SCALE 1:50

REFLECTED CEILING PLAN SCALE

1:50

DATE

30 NOVEMBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

DWG_DWD_THQ_GF_RCP_03

FAMILY FUN PRINTING 2

ALL DIMENSIONS SHOWN ARE TO CROSS CHECK WITH SITE CONDITIONS AND THE CONTRACTORS ARE RESPONSIBLE TO HIGHLIGHT ANY DISCREPANCIES TO THE SUPERVISING ARCHITECT/DESIGNER BEFORE ANY WORK IS CARRIED OUT.

7575

DATE

NO.

AMENDMENTS

C 2225

D CONSULTANT:

NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

1200mm (L) X 400mm (W) X 12mm (THK. ) MAPLE FLOOR STRIPS IN SHELLAC FINISH c/w 0.3mm (THK. ) DPM

COLLECTOR RETAIL

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

6750

HALL OF FAME

DRAWING TITLE:

FF1: MAPLE FLOOR STRIPS IN SHELLAC FINISH

FLOOR FINISHES PLAN LEGEND SYM DESCRIPTION FF1

1200mm (L) X 400mm (W) X 12mm (THK. ) MAPLE FLOOR STRIPS IN SHELLAC FINISH c/w 0.3mm (THK.) DPM

AREA

SCALE

1:50

DATE

30 NOVEMBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

68.18mÂ²

E FFP

FLOOR FINISHES PLAN- COLLECTOR RETAIL

SCALE 1:50

DWG_DWD_THQ_GF_FFP_04

ALL DIMENSIONS SHOWN ARE TO CROSS CHECK WITH SITE CONDITIONS AND THE CONTRACTORS ARE RESPONSIBLE TO HIGHLIGHT ANY DISCREPANCIES TO THE SUPERVISING ARCHITECT/DESIGNER BEFORE ANY WORK IS CARRIED OUT.

DATE

NO.

AMENDMENTS

27360

4550

18090

SELECTED BUILT-IN COPPER1 FRAME WORKSTATION c/w 50 mm (THK. ) OAK CABINET IN SHELLAC FINISH c/w 25 mm (THK.) TEMPERED GLASS TABLE TOP TO BE PROPOSED

SELECTED 2750 mm (L)1 X 650mm (W) X 780mm (HT.) WOOD CUTTING STATION TO BE PROPOSED

SELECTED 275 mm (DIA) PRINTMAKING INK TEMPERED GLASS TUBES STORAGE TO BE PROPOSED

REFER TO BESPOKE DETAIL

4720

SELECTED 5000 mm (L) X 2430mm (W) X1 2750mm (HT.) COPPER FRAMED KIOSK IN POLISHED FINISH c/w 50mm (THK. ) OAK CABINETS IN SHELLAC FINISH c/w 50 mm (DIA.) ABS PLASTIC TUBES TO BE PROPOSED

WATER BASIN TO BE PROPOSED

SELECTED 3580 mm (L) X 1300mm (W) X 2700mm (HT.) COPPER FRAMED KIOSK IN POLISHED FINISH c/w 50mm (THK. ) OAK CABINETS IN SHELLAC FINISH c/w 50 mm (DIA.) ABS PLASTIC TUBES TO BE PROPOSED

▼CEILING LEVEL

2530

NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

400

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

3100

▼CEILING LEVEL

6030

▼FIRST FLOOR LEVEL

DRAWING TITLE:

▼GROUND LEVEL

SECTION X-X

SELECTED 5160 mm (L) X 2740mm (W) X 2700mm (HT.) COPPER FRAMED KIOSK IN POLISH FINISH c/w 2300mm (DIA) HAMSTER HUMAN WHEEL c/w 5160 mm (L) X 2740mm (W) X 180 mm (THK.) CARVED WOOD BASE PANEL IN SHELLAC FINISH TO DESIGNER'S PROPOSAL

SELECTED 3920 mm (L) X 3040mm (W) X 2860mm (HT.) BUILT IN COPPER FRAME IN POLISHED FINISHc/w 50mm (THK. ) OAK SHELVINGS IN SHELLAC FINISH c/w 50 mm (DIA.) POLY CARBONATE TUBES TO DESIGNER'S APPROVAL

SELECTED 3450 mm (L) X 3800mm (W) X 2750mm1 (HT.) COPPER FRAMED KIOSK IN POLISHED FINISH c/w 50 mm (DIA.) ABS PLASTIC TUBES c/w 940mm (L) X 940 mm (W) X 940 mm (HT.) OAK HANGING CHAIR IN SHELLAC FINISH TO DESIGNER'S PROPOSAL

SELECTED 1900 mm (L) X 1900mm (W) X1 2780mm (HT.) BUILT IN COPPER FRAMED KIOSK IN POLISHED FINISH c/w 50mm (THK.) OAK SHELVINGS IN SHELLAC FINISH c/w 50mm (DIA.) ABS PLASTIC TUBES TO DESIGNER'S APPROVAL

SECTION X-X

X-X

SCALE 1:75

SCALE

1:75

DATE

30 NOVEMBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

DWG_DWD_THQ_GF_SC_05

ALL DIMENSIONS SHOWN ARE TO CROSS CHECK WITH SITE CONDITIONS AND THE CONTRACTORS ARE RESPONSIBLE TO HIGHLIGHT ANY DISCREPANCIES TO THE SUPERVISING ARCHITECT/DESIGNER BEFORE ANY WORK IS CARRIED OUT.

2970 DATE

1700

150

600

AMENDMENTS

370

SELECTED M1 150mm (L) X 150mm (W) X 1990mm (HT.) COPPER VERTICAL FRAME IN POLISHED FINISH WELDED TO M1 2700mm (L) X 140mm (W) X 150mm (THK.) COPPER HORIZONTAL FRAME IN POLISHED FINISH

100

NO.

SELECTED T1 3000mm (L) X 970mm (W) X 1400mm (HT.) ANTICO OAK BASE IN WHITE LAMINATED FINISH IN BUTT JOINERY

A 2500

NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

SELECTED T1 2700mm (L) X 900mm (HT.) X 1700mm (W) ANTICO OAK WORK TOP IN WHITE LAMINATED c/w G1 3000mm (L) X 800mm (W) X 25mm (THK.) TEMPERED GLASS c/w M2 5mm (THK.) STAINLESS STEEL FRAME USING EPOXY c/w P1 2700mm (L) X 500mm (W) X 50mm (HT.) WHITE ABS DRYING RACK SELECTED F1 DASHED LINE 2700mm (L) X 1700mm (W) X 0.3mm (THK.) RED AND WHITE POLYESTER HAMMOCK CLOTH

100

2700

CONSULTANT:

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my DRAWING TITLE:

FLEXIBLE STALL DESIGN PLAN SCALE

1:20

DATE

30 NOVEMBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

150

3000

SELECTED 600mm (L) X 150mm (W) X 312mm (HT.) KIOSK TYRE USING 20mm (DIA) ALUMINUM AXLE ROD JOINERY 100mm (L) X 100mm (W) X 312mm (HT.) LOCKING CASTER TO MANUFACTURER'S DETAIL

PLAN OF FLEXIBLE STALL

SCALE 1:20

DWG_DWD_THQ_GF_FS_06a

ALL DIMENSIONS SHOWN ARE TO CROSS CHECK WITH SITE CONDITIONS AND THE CONTRACTORS ARE RESPONSIBLE TO HIGHLIGHT ANY DISCREPANCIES TO THE SUPERVISING ARCHITECT/DESIGNER BEFORE ANY WORK IS CARRIED OUT.

3000 150

900

DATE

900

AMENDMENTS

150 55

2890

770

170

NO.

CONSULTANT: MITRAJAYA SDN. BHD. No. 9, Block D, Pusat Perdagangan Puchong Prima,, Persiaran Prima Utama, Taman Puchong Prima,, 47150 Puchong, Selangor t: 03-8060 9999 e: mhb@mitrajaya.com.my

130 150

600

SELECTED F1 2700mm (L) X 1700mm (W) X 0.3mm (THK.) RED AND WHITE POLYESTER HAMMOCK CLOTH c/w T1 2890mm (L) X 970mm (W) X 55mm (THK.) ANTICO OAK CABINET TOP PANEL IN SHELLAC FINISH

PROJECT TITLE: TO PREPARE SELECTED WORKING DRAWINGS REQUIREMENTS FOR PROPOSED INTERIOR DESIGN WORK (SELECTED AREA- MARKET HALL) FROM DESIGN STUDIO

VOID

100

VOID

230 82

600

50 312

362

VOID

FRONT ELEVATION B

SCALE 1:20

NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

SELECTED T1 970mm (L) X 55mm (W) X 490mm (HT.) ANTICO OAK CABINET SIDE PANEL IN SHELLAC FINISH c/w T1 2700mm (L) X 600mm (W) X 55mm (THK.) ANTICO OAK CABINET BACK PANEL IN SHELLAC FINISH IN BUTT JOINERY SELECTED M1 150mm (L) X 150mm (W) X 1990mm (HT.) COPPER VERTICAL FRAME IN POLISHED FINISH WELDED TO M1 2700mm (L) X 140mm (W) X 150mm (THK.) COPPER HORIZONTAL FRAME IN POLISHED FINISH c/w T1 2700mm (L) X 900mm (HT.) X 1700mm (W) ANTICO OAK WORK TOP IN WHITE LAMINATED FINISH c/w T2 3000mm (L) X 800mm (W) X 450mm (HT.) PLYWOOD SEATING IN WHITE

900

1990

3122

710

CONSULTANT:

SELECTED 600mm (L) X 150mm (W) X 312mm (HT.) KIOSK TYRE USING 20mm (DIA) ALUMINUM AXLE ROD JOINERY c/w 100mm (L) X 100mm (W) X 312mm (HT.) LOCKING CASTER TO MANUFACTURER'S DETAIL

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my DRAWING TITLE:

FLEXIBLE STALL DESIGN FRONT ELEVATION B SCALE

1:20

DATE

30 NOVEMBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

DWG_DWD_THQ_GF_FS_06c

ALL DIMENSIONS SHOWN ARE TO CROSS CHECK WITH SITE CONDITIONS AND THE CONTRACTORS ARE RESPONSIBLE TO HIGHLIGHT ANY DISCREPANCIES TO THE SUPERVISING ARCHITECT/DESIGNER BEFORE ANY WORK IS CARRIED OUT.

2700 1700

150

970 55

150

VOID

NO.

AMENDMENTS

1000

VOID

DATE

VOID

PROJECT TITLE: TO PREPARE SELECTED WORKING DRAWINGS REQUIREMENTS FOR PROPOSED INTERIOR DESIGN WORK (SELECTED AREA- MARKET HALL) FROM DESIGN STUDIO VOID

VOID

CONSULTANT:

VOID VOID VOID

VOID

MITRAJAYA SDN. BHD. No. 9, Block D, Pusat Perdagangan Puchong Prima,, Persiaran Prima Utama, Taman Puchong Prima,, 47150 Puchong, Selangor t: 03-8060 9999 e: mhb@mitrajaya.com.my

VOID

VOID VOID

VOID

VOID VOID

600

1090

VOID VOID

VOID

800 VOID

VOID VOID

100

VOID

50 150

500

'2'

300

800

VOID VOID

50 450

250

312

80 50

250

'1'

SECTION A-A

SCALE 1:10

SELECTED T1 2700mm (L) X 1000mm (W) X 100mm (HT.) ANTICO OAK WORK TOP IN WHITE LAMINATED FINISH c/w G1 3000mm (L) X 800mm (W) X 25mm (THK.) TEMPERED GLASS c/w M2 5mm (THK.) STAINLESS STEEL FRAME USING EPOXY c/w P1 2700mm (L) X 500mm (W) X 50mm (HT.) WHITE ABS DRYING RACK

500

VOID VOID

900

170

VOID VOID

435

2352

VOID VOID

300

VOID

3212

VOID VOID

SELECTED T1 3000mm (L) X 970mm (W) X 1765mm (HT.) ANTICO OAK CABINET IN SHELLAC FINISH c/w T2 3000mm (L) X 970mm (W) X 1400mm (HT.) PLYWOOD BASE IN WHITE LAMINATED FINISH IN BUTT JOINERY

SELECTED P1 3000mm (L) X 500mm (W) X 50mm (HT.) WHITE ABS DRYING RACK c/w 10mm (THK.) ALUMINUM L SHAPE WALL BRACKET IN SCREW JOINERY TO MANUFACTURER'S DETAIL SELECTED T1 2700mm (L) X 900mm (HT.) X 1700mm (W) ANTICO OAK WORK TOP IN WHITE LAMINATED FINISH c/w T2 3000mm (L) X 800mm (W) X 450mm (HT.) PLYWOOD SEATING IN WHITE c/w M3 50mm (THK.) ALUMINUM BAR IN C CHANNEL

CONSULTANT: NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my DRAWING TITLE:

FLEXIBLE STALL DESIGN SECTION A-A SCALE

1:10

DATE

30 NOVEMBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

DWG_DWD_THQ_GF_FS_06c

500

SELECTED ALUMINUM L-SHAPE WALL BRACKET IN POLISHED FINISH IN SCREW JOINERY TO MANUFACTURER'S DETAIL

100

SELECTED T1 2700mm (L) X 1000mm (W) X 100mm (HT.) SOLID OAK WORKTOP IN WHITE LAMINATED FINISH c/w M2 5mm (THK.) STAINLESS STEEL FRAME USING GORILA GLUE

SELECTED T1 900mm (HT.) X 1700mm (W) SOLID OAK WORK TOP AND T2 PLYWOOD SEATING IN WHITE LAMINATED FINISH

AMENDMENTS

PROJECT TITLE: TO PREPARE SELECTED WORKING DRAWINGS REQUIREMENTS FOR PROPOSED INTERIOR DESIGN WORK (SELECTED AREA- MARKET HALL) FROM DESIGN STUDIO

SELECTED G1 3000mm (L) X 800mm (W) X 25mm (THK.) TEMPERED GLASS c/w M2 20mm (L) X 30mm (W) X 5mm (THK.) STAINLESS STEEL FRAME USING EPOXY

50 300

20 SELECTED P1 50 mm (DIA) WHITE ABS DRYING RACK c/w M1 20mm (THK.) COPPER FRAME KIOSK IN POLISHED FINISH

NO.

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my DRAWING TITLE:

FLEXIBLE STALL DESIGN DETAIL BLOW UP

DETAIL 1

DETAIL 2

SCALE 1:5

SCALE 1:2

SCALE

AS SHOWN

DATE

30 NOVEMBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

DWG_DWD_THQ_GF_FS_06d

NO.

AMENDMENTS

SELECTED F1 2700mm (L) X 1700mm (W) X 1 0.3mm (HT.) RED AND WHITE POLYESTER HAMMOCK CLOTH c/w T1 2890mm (L) X 970mm (W) X 55mm (THK.) ANTICO OAK CABINET TOP PANEL IN SHELLAC FINISH

SELECTED T1 970mm (L) X 55mm (W) X 490mm1 (HT.) ANTICO OAK CABINET SIDE PANEL IN SHELLAC FINISH c/w T1 2700mm (L) X 600mm (W) X 55mm (THK.) ANTICO OAK CABINET BACK PANEL IN SHELLAC FINISH IN BUTT JOINERY

PROJECT TITLE: TO PREPARE SELECTED WORKING DRAWINGS REQUIREMENTS FOR PROPOSED INTERIOR DESIGN WORK (SELECTED AREA- MARKET HALL) FROM DESIGN STUDIO CONSULTANT: MITRAJAYA SDN. BHD. No. 9, Block D, Pusat Perdagangan Puchong Prima,, Persiaran Prima Utama, Taman Puchong Prima,, 47150 Puchong, Selangor t: 03-8060 9999 e: mhb@mitrajaya.com.my CONSULTANT: NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

CONSULTANT: MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

SELECTED 150mm (L) X 150mm (W) X 1990mm (HT.) COPPER VERTICAL FRAME IN POLISHED FINISH M1 WELDED TO 2700mm (L) X 140mm (W) X 150mm (THK.) COPPER HORIZONTAL FRAME IN POLISHED FINISH M1 c/w 2700mm (L) X 900mm (HT.) X 1700mm (W) PLYWOOD WORK TOP AND SEATING IN WHITE LAMINATED FINISH T2

SELECTED 600mm (L) X 150mm (W) X 312mm (HT.) KIOSK TYRE USING 20mm (DIA) ALUMINUM AXLE ROD JOINERY c/w 100mm (L) X 100mm (W) X 312mm (HT.) LOCKING CASTER TO MANUFACTURER'S DETAIL

ISO FS

ISOMETRIC OF FLEXIBLE STALL

DRAWING TITLE:

FLEXIBLE STALL DESIGN 3D VIEW SCALE

N/A

DATE

30 NOVEMBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

DWG_DWD_THQ_GF_FS_06e

ALL DIMENSIONS SHOWN ARE TO CROSS CHECK WITH SITE CONDITIONS AND THE CONTRACTORS ARE RESPONSIBLE TO HIGHLIGHT ANY DISCREPANCIES TO THE SUPERVISING ARCHITECT/DESIGNER BEFORE ANY WORK IS CARRIED OUT.

LEGEND

SYMBOL DESCRIPTION M

METER

WASH BASIN

DATE

NO.

AMENDMENTS

VALVE WF

WATER FILTER SYABAS WATER METER

3 NOS 400 GALLONS WATER STORAGE TANK (SIRIM APP) ON CONCRETE PLINTH SUPPORT TO ENGR'S DETAIL (C/W MOSQUITO NETTING)

▼SL

38mmø UPVC SCOUR PIPE

GRADUATION MEMORY TOKEN

20mmø STOP COCK 1800mm HT. FROM GROUND LEVEL

'PRINT' THE KNOT

CONSULTANT: NAGANO HOLDINGS SDN. BHD. ZP-09, Zest Point, BK 9, Bandar Kinrara,, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t: 03-8080 1115 e: admin@naganoholdings.com.my.

▼FL CONSULTANT:

BEGIINNER'S TOUCH M

ARTISAN OFFICE WB

MEGAJUTA HOLDINGS 2-2, Jln Puteri 4/9, Bandar Puteri, 47100 Puchong, Selangor t: 03-8066 8017 e: Mailcontractor@megajuta.com.my

FAMILY FUN PRINTING WB

▼GL

DRAWING TITLE:

SINGLE LINE DRAWINGWATER SUPPLY 25mmø STAINLESS STEEL INCOMING PIPE FROM WATER MAIN SYABAS

WS A

WATER SUPPLY DIAGRAM OF ZONE A

SCALE

N/A

DATE

30 NOVEMBER 2020

DRAWN BY

TEE HUI QING

CHECKED BY

MS NORJI/ MS.AZIAH

DWG_DWD_THQ_GF_WS_08

REFLECTION If I were to name the most challenging part, it would probably be the flexible stall design as it is the highlight item in my proposed market design. Since it's not as-built, I have to identify the suitable material and finishes as well, based on not just aesthethics, but also practicality. The joinery parts to connect different materials also required researches and thanks to the lecturers' guidances I was able to learn something new.

ASSIGNMENT 3

The final assignment taught me about the real drawings that are to be produced in the working world, such as Setting Out Plan, Floor Finishes Plan, Section and etc. Since the duration for us to complete all real drawings are insufficient, we are allowed to combine some of the drawings as to increase our understandings as well. Since the last assignment was based on our own studio project, they are drawn according to our own designs, unlike the previous as-built drawings.

List of names that need to be prepared for working drawings in reality Sets of drawings needed in reality include Addtition & Demolition Plan, Existing Structure Plan, Furniture Layout Plan, Hoarding layout Plan, Hoarding Visual, Electrical Plan, M&E Plan, Reflected Ceiling Plan, Ceiling Layout Plan, Fire Sprinkler Plan, Floor Finishes Plan, Wall Finishes Plan, A/C Ducting Plan, Elevation, Section, Furniture Detail and Plumbing Plan. Parties involved from the start till the completion and their roles in the project Parties invloved are Mitrajaya Sdn. Bhd. (Design consultant), In-Situ Group of Companies (Mechanical Engineering consultant) and E & H Plumbing Contractor (Plumbing consultant). 5 UBBL by-laws requirement related to the design proposal 1) Act 39. (1) Every room designed, adapted or used for residential, business or other purposes except hospitals and schools shall be provided with natural lighting and natural ventilation by means of one or more windows having a total area of not less than 10% of the clear floor area of such rom and shall have openings capable of allowing a free uninterrupted passage of air of not less than 5% of such floor area.

2) Act 39. (4) Every water-closet, latrine, urinal or bathroom shall be provided with natural lighting and natural ventilation by means of one or more openings having a total area if not less than 0.2 square metre per water-closet, urinal latrine or bathroom and such openings shall be capable of allowing a free uninterrupted passage of air. 3) Act 46. (4) The minimum headroom of any habitable room or space inside any building shall be 2 metres. 4) Act 103. (1) Where structural timber floors are permissible under these By-Laws they shall be designed of hardwood or of species of timber treated with a suitable wood preservative. 5) Act 106. (1) In any staircase, the rise of any staircase shall be not more than 180 millimetres and the tread shall be not less than 255 millimetres and the dimensions of the rise and the tread of the staircase so chosen shall be uniform and consistent throughout.

OVERALL REFLECTION

It's definitely a must to understand the UBBLs well as we play an essential role that the space we designing are safe and practical to use, not just merely created to please our eyes. Although the learning process was tough, I am relieved that this module is integrated with my studio module to assist me better in understanding the drawings manners and time management as well. Last but not least, I'd like to convey my appreciation towards Ms. Norji and Ms. Aziah who tried their very best in guiding us throughou this semester. Thank you.

ASSIGNMENT 1-3

Throughout these 3 assignments, I've learnt the importance of documenting the drawings in a proper and professional manner as if they are the real construciton drawings. It's crucial to apply the appropriate pen assignment and formatting while preparing the documents so that they can be comprehended well. Experiences on producing staircase, kitchen, toilet, marketplace related drawings are gained. Moreover, I'm able to understand more of its joinery, method of constructions and the materials and fininshes applied to construct an area/space in accordance to the UBBLs.