Product Data Sheets
Heavy Duty Belt Conveyor System
Heavy Duty Belt Conveyor System
A length of belt conveyor driven from the end of the conveyor length. It comprises of an end drive unit, skid frame and end terminal. A standard two ply polyester belt, which has a super-adhesive PVC top suface and a low friction polyester underside, transports the conveyor loads. Available in LH & RH options (Side the geared motor is positioned). Modules up to 5 metres in length Speeds up to 60m/min
1
Heavy Duty Belt Conveyor System
End Drive Unit An end drive is attached to the bed sections skid frame, through which the returning load carrying belt is threaded, providing motive power for the conveyor. The geared motor is mounted directly to the drive roller shaft.
Tension Facility
The end drive consisits of a 114mm diameter crowned drive roller, which is lagged to ensure maximum transmission of power to the belt. The pulley together with an integral 38mm diameter shaft revoles in precision flanged bearings fixed to the drive unit side plates. An adjustable tension roller (76mm diameter) is also fitted with precision bearings to provide a tensioning facility via an adjusting stud.
End Terminal The end terminal consisits of a 76mm diameter crowned roller and a 63mm snugging roller, both rollers are fitted with precision bearings. The snugging roller provides a tracking facility via adjusting cams.
Adjusting Cams
The end terminal can be extended in length up to 50mm. This will enable more flexibility in conveyor overall lengths and belt tensioning.
Skid Frames Frames are made from cold formed 135mm x 100mm x 2.5mm thick painted steel channels. Skid plates are made from 2.5mm thick zinc plated steel and are fitted within the frames. Return rollers are 60mm diameter with precision bearings and axles are sprung loaded for ease of installation. Return rollers are positioned in slotted holes to allow for belt tracking.
Slotted Hole
2
Heavy Duty Belt Conveyor System
A length of belt conveyor driven from an underslung drive unit positioned along the length of conveyor. It comprises of a centre drive unit, skid frame and end terminals. A standard two ply polyester belt, which has a super-adhesive PVC top suface and a low friction polyester underside, transports the conveyor loads. Available in LH & RH options (Side the geared motor is positioned). Modules up to 30 metres in length* Speeds up to 60m/min *To be used as transport conveyor only (minimal stop/starts per hour) when using lengths above 15 metres
3
Heavy Duty Belt Conveyor System
Centre Drive Unit A centre drive is attached beneath the bed sections skid frame, through which the returning load carrying belt is threaded, providing motive power for the conveyor. The geared motor is mounted directly to the drive drum shaft.
Tension Facility
The centre drive consisits of a 219mm effective diameter (688mm circumference) drive drum, which is lagged to ensure maximum transmission of power to the belt. The drive drum together with an integral 50mm diameter shaft revoles in precision flanged bearings fixed to the drive unit side plates. An adjustable tension roller (101mm diameter) is also fitted with precision bearings to provide a tensioning facility via an adjusting stud.
End Terminal The end terminal consisits of a 76mm diameter crowned roller and a 63mm snugging roller, both rollers are fitted with precision bearings. The snugging roller provides a tracking facility via adjusting cams.
Adjusting Cams
The end terminal can be extended in length up to 50mm. This will enable more flexibility in conveyor overall lengths and belt tensioning.
Skid Frames Frames are made from cold formed 135mm x 100mm x 2.5mm thick painted steel channels. Skid plates are made from 2.5mm thick zinc plated steel and are fitted within the frames. Return rollers are 60mm diameter with precision bearings and axles are sprung loaded for ease of installation. Return rollers are positioned in slotted holes to allow for belt tracking.
4