Series P Planetary
Technical Up to - 30kW / 12000Nm Planetary CP-2.00GB0413
SERIES P PRODUCTS IN THE RANGE Serving an entire spectrum of mechanical drive applications from food, energy, mining and metal; to automotive, aerospace and marine propulsion, we are here to make a positive difference to the supply of drive solutions.
Series A Worm Gear units and geared motors in single & double reduction types
Series BD Screwjack worm gear unit
Series BS Worm gear unit
Series C Right angle drive helical worm geared motors & reducers
Series F Parallel shaft helical geared motors & reducers
Series G Helical parallel shaft & bevel helical right angle drive gear units
Series H Large helical parallel shaft & bevel helical right angle drive units
Series J Shaft mounted helical speed reducers
Series K Right angle helical bevel helical geared motors & reducers
Series M In-line helical geared motors & reducers
Roloid Gear Pump Lubrication and fluid transportation pump
Series X Cone Ring Pin and bush elastomer coupling
Series X Gear Torsionally rigid, high torque coupling
Series X Grid Double flexing steel grid coupling
Series X Nylicon Gear coupling with nylon sleeve
Series X Torque Limiter Overload protection device
We offer a wide range of repair services and many years experience of repairing demanding and highly critical transmissions in numerous industries.
We can create custom engineered transmission solutions of any size and configuration.
Benzler Series P Cat .indd 2
21/03/2013 13:19
SERIES P CONTENTS
General Description_ ____________________________________________________________
1
Selection______________________________________________________________________
2
Designation____________________________________________________________________
5
Nominal Torque_________________________________________________________________
6
PL01_________________________________________________________________________
7
PL02_________________________________________________________________________
9
PL03_________________________________________________________________________
11
PL05_________________________________________________________________________
13
PL08_________________________________________________________________________
15
PL12_________________________________________________________________________
17
Overhung Loads________________________________________________________________
19
Motorised Ratings_______________________________________________________________
20
Lubrication_ ___________________________________________________________________
35
Shipping Specification_ __________________________________________________________
37
iii Benzler Series P Cat .indd 3
21/03/2013 13:19
SERIES P
GENERAL DESCRIPTION
GENERAL DESCRIPTION
This initial range of Series P Planetary units has 6 sizes with ratio coverage from 3.6:1 to 3200:1 and provides an efficient and compact drive solution to meet power requirements up to 30kW and up to 12000Nm torque capacity. The range takes advantage of Radicon’s many years of accumulated design expertise, together with the use of high quality materials and components, the end result is a high quality series of planetary gear reducers and geared motors offering a high load carrying capacity, high efficiency, quiet running and reliable drive solution. Standard unit versions available: Parallel (co-axial) drive options: • Base Mounted • Flange Mounted Input options: • Input shaft with keyway • Motor adapter to suit fitting of IEC B5 motor • Motor adapter to suit fitting of NEMA C flange motor Output options: • Output shaft with keyway • Hollow output shaft to suit connection with shrink disk • Output shaft with external spline • Output shaft with internal spline Design features: • • • • • •
Gears are manufactured from high quality materials heat treated and profile ground providing a high level of surface finish to ensure efficient high load carrying capacity and quiet operation Motor connections are designed to suit standard IEC or NEMA C motors, other motor connections can be provided on request. All units are designed with ability to fit double oil seals to both input and output shaft assemblies Units are designed to be dimensionally interchangeable with other major manufacturers Units are modular in design allowing many possible unit combinations to be built from a limited inventory Units are designed so that they may be easily customised to suit more exacting customer requirements.
1 Benzler Series P Cat .indd 1
21/03/2013 13:19
SERIES P
SELECTION
SELECTION
GEAR UNIT SELECTION f
Service Factor (f = fm x fs)
fm
Mechanical Service Factor
Fr1
Input Shaft Radial Load Capacity (N)
Fr2
Output Shaft Radial Load Capacity (N)
fs
Starting Frequency Factor
n1
Input Speed (rpm)
n2
Output Speed (rpm)
i
Actual Transmission Ratio = n1 n2
iN
Nominal Transmission Ratio
Pe
Absorbed Power (kW)
T2
Rated Output Torque
M2
Output Torque (Nm) = Pe x 9550 n2
n2*h Output Speed (rpm) x Operating Hours
h
Lifetime (hours)
Pt
Thermal Rating (when t = 20 °C)
fw
t
Ambient Temperature (°C)
Thermal Rating Modifying Factor
Mechanical Service Factor fm Prime Mover Electric Motor Hydraulic Motor Piston Engine >3 Cylinders Piston Engine 1-3 Cylinders
Operating Duty Hours/Day <3 3 to 10 >10 <3 3 to 10 >10 <3 3 to 10 >10
Starting Frequency Factor fs
Load Classification Driven Machine
U Uniform 0.80 1.00 1.25 1.00 1.25 1.50 1.25 1.50 1.75
M Moderate 1.00 1.25 1.50 1.25 1.50 1.75 1.50 1.75 2.00
H Heavy 1.50 1.75 2.00 1.75 2.00 2.25 2.00 2.25 2.50
Starts (or Stops) per Hour
fs
1 2-5 6 - 10 11 - 40 41 - 80 >80
1.00 1.06 1.10 1.16 1.20 1.25
Thermal Modifying Factor fw Ambient Temperature
-20°C -10°C 0°C 10°F 20°C 25°C 30°C 40°C 50°C
100% 1.50 1.35 1.25 1.12 1.00 0.95 0.88 0.75 0.63
Duration of Operation per Hour 80% 60% 40% 1.61 1.78 2.06 1.45 1.60 1.86 1.34 1.48 1.72 1.20 1.33 1.54 1.07 1.19 1.37 1.02 1.13 1.31 0.94 1.04 1.21 0.80 0.89 1.03 0.67 0.75 0.87
20% 2.65 2.38 2.20 1.98 1.76 1.68 1.55 1.32 1.11
2 Benzler Series P Cat .indd 2
21/03/2013 13:20
SERIES P
SELECTION
SELECTION
Load Classification by Application Dredgers
Load Classification U M H †
Uniform Load Moderate Shock Load Heavy Shock Load Consult our Engineers
Agitators Pure liquids Liquids and solids Liquids variable density Blowers Centrifugal Lobe Vane
U M M U M U
Brewing & distilling Bottling machinery Brew kettles Cookers Mash tubs Scale Hopper
M M M M M
Can filling machine
M
Crane knife
M
Car dumper
M
Car puller
M
Clarifier
U
Classifier
M
Clay working machinery Brick press Briquette machine Clay working machine Plug mill
H H M M
Compressors Centrifugal Lobe Reciprocating Multi cylinder Single cylinder
U M M H
Conveyors-Light duty uniform load Apron Assembly Belt Bucket Chain Flight Oven Screw
U U U U U U U U
Conveyors-Heavy duty non-uniform load Apron Assembly Belt Bucket Chain Flight Live roll Oven Reciprocating Screw Shaker
M M M M M M † M M M M
Cranes
†
Crusher Ore Stone Sugar
H H H
Conveyors Cutter head drive Pumps Screen Drive Stackers Winches
M H H M H M M
Elevators Bucket - Uniform load Bucket - Heavy load Bucket - Continuous Centrifugal discharge Escalators Freight Gravity discharge Passenger Lifts
U M U U U M U †
Fans Centrifugal Cooling towers Induced draft Forced draft Fan- Large diameter induced draft Fan, light, small diameter
† † M M
Feeders Apron Belt Disc Reciprocating Screw
M M U H M
Food Industry Cereal cooker Dough mixer Meat grinder Meat slicer
U M M M
Generators - not welding
U
Hammer mills
H
Hoists Heavy duty Medium duty Skip hoist
H M M
Laundry Tumbler Washer
M M
Line shafts Heavy duty Light duty
M U
Lumber industry Barkers Burner conveyor Chain / Drag saw Chain transfer Chain way transfer De-barking drum Edger feed Gang feed Green chain Live roll Log deck Log Haul Log turning Log conveyor Of bearing roll Planer feed chains Planer hoist Re-saw conveyor Roll cases Slab conveyor Sorting table Triple hoist Triple hoist - drive/conveyor Transfer conveyor Transfer roll Tray drive Trimmer feed Waste conveyor Small waste conveyor (belt) Small waste conveyor (chain)
M M H H H H M M M H H H H H M M M M H H M M M M M M M U M
Machine Tools Bending roll Punch press Notching press Plate planer Other machine tools Main drive Aux drive Metal mills Carriage / Main drive Draw bench Dryer Flattening machine Pinch drive Reversing slitters Scrubber rolls Table conveyors Group drives Individual drives Table conveyors - reversing Wire draw Wire roll
U
M H H H M U
M M M M M M M M H H M M
Mills Cement kiln Dryer, Cooler Kiln (other) Rod plain Rod wedge bar Rotary / Ball Tumbling barrel
H H H H H H H
Mixers Concrete Cons density Variable density
M U M
Oil Industry Chillers Oil well pump Filter press Rotary kiln
M M M M
Paper Agitator (mixer) Barker (hydraulic) Barker (mechanical) Barking drum Beater & pulper Bleacher Calenders Calender- Super Converting machine Conveyors Couch Cutters - plates Cylinders Dryers Felt stretcher Felt whipper Jordans Log haul Machine reel Presses Stock chest Suction roll Washers & thickeners Winders
M M H H M U M H M U M H M M M H M H M M M M M M
Printing presses
†
Pullers Barge haul
H
Pumps Centrifugal Proportioning Reciprocating Single acting 3+ cylinders Double acting 2+ cylinders Single acting 1 & 2 cylinders Double acting 1 cylinder Rotary - gear type Rotary - lobe type / vane
Sand muller
M
Sewage treatment Bar screen Chemical feeder Collector Dewatering screw Mixers Scum breaker Thickeners Vacuum filters
U U U M M M M M
Screens Air washing Rotary, stone or gravel Travelling water intake
U M U
Slab pushers
M
Slewing
H
Steering gear
†
Stokers
U
Sugar Industry Cane Knife Crusher Mills
M M M
Textile Industry Batchers Calenders Cards Dry cans Dryers Dyeing machinery Knitting machines Looms Mangles Nappers Pads Range drive Slashers Soapers Spinners Tenter frame Washers Winders
M M M M M M M M M M M M M M M M M M
Windlass
†
U M M M † † U U
3 Benzler Series P Cat .indd 3
21/03/2013 13:20
SERIES P
SELECTION
SELECTION
Determine the Service Factor f
SELECTION EXAMPLE Example 1 (For Motorised Unit)
Refer to Mechanical Service Factor Table fm, And Starting Frequency Factor Table fs
Absorbed Power (Pe) = 5 kW
Operating Duty Hours/Day
Prime Mover
Motor Power = 5.5 kW Required Ratio (¡) = 1450 22 Ambient Temp (t) = 30°C
Piston Engine >3 Cylinders
= 66:1
U Uniform
M Modera te
H Heavy
0.80 1.00 1.25 1.00 1.25 1.50 1.25 1.50 1.75
1.00 1.25 1.50 1.25 1.50 1.75 1.50 1.75 2.00
1.50 1.75 2.00 1.75 2.00 2.25 2.00 2.25 2.50
<3 3 to 10 >10 <3 3 to 10 >10 <3 3 to 10 >10
Electric Motor Hydraulic Motor
n1 = 1450 rpm, n2 = 22 rpm
Load Classification Driven Machine
Piston Engine 1-3 Cylinders
f = fm x fs (1.25 x 1.00)
Moderate Shock Loading I start / hour 8 hours / day Continuous Operation
Starts (or Stops) per Hour
fs
1 2-5 6 - 10 11 - 40 41 - 80 >80
1.00 1.06 1.10 1.16 1.20 1.25
f = 1.25
Determine Thermal Modifying Factor fw Refer to Thermal Modifying Factor Table fw
Determine the Output Torque T2
Ambient Temperature
20°C 25°C 30°C 40°C 50°C
T2 = Pe x 9550 n2 T2 = 5 x 9550 = 2170 Nm 22
Duration of Operation per Hour 100% 80% 60% 1.00 1.07 1.19 0.95 1.02 1.13 0.88 0.94 1.04 0.75 0.80 0.89 0.63 0.67 0.75
fw (for 30°C) = 0.88
Select Gear Unit Refer to Motorised Selection Tables (select a motor power larger than the absorbed power) 5.5 kW 4-pole
n2 41.6 34.4 28.9
Ratio i 34.88 42.19 50.19
M2 (Nm) 1225 1482 1764
fm 1.57 1.32 0.83
Fr2 (N) 28500 28500 28500
26.3 21.7 17.9 16.5
55.09 66.79 80.96 87.83
1916 2322 2815 3054
1.75 1.46 1.22 1.13
28500 28500 28500 28500
Unit selected: PL0330
PL0320 PL0320 PL0320
Unit Designation 36. -M--5.5 45. -M--5.5 50. -M--5.5
PL0330 PL0330 PL0330 PL0330
56. 71. 80. 90.
-M---M---M---M---
5.5 5.5 5.5 5.5
A A A
Motor Frame 132 132 132
Pt (kW) 14.1 15.1 13.8
A A A A
132 132 132 132
11.1 11.1 11.1 10.9
¡N = 71.
Check the Required Service Factor f (1.25) is less than Fm (1.46) Check the Output Torque M2 (2322Nm) is greater than the required torque T2 (2170Nm) Check Thermal Capacity Pt x fw (11.1 x 0.88 = 9.77 kW) is greater than absorbed power Pe (5 kW) Check the output speed, n2 (21.7 rpm) is within range of requirement (22 rpm) Check that any Overhung Load applied does not exceed Fr2* (N) *Fr2 is applied at Centre of shaft extension
Lifetime Check Refer to the n2*h Selection Tables SERIES P PL0330
Ratio iN 56. 71. 80. 90.
Ratio i 55.09 66.79 80.96 87.83
10,000
3930 3930 3930 3930
T2 (Nm) - n2 x h rating
25,000
50,000
3700 3700 3700 3700
3648 3648 3648 3648
100,000
3400 3400 3400 3400
500,000
2536 2536 2536 2536
1,000,000
2060 2060 2060 2060
n1 Max 3500
Pt kW 11.1 11.1 11.1 10.9
Look up n2*h value for required torque T2 (2170Nm) n2*h = 850,000 (by linear Interpolation) Lifetime (hours) = n2*h n2
= 850,000 = 38600 hours 22
4 Benzler Series P Cat .indd 4
21/03/2013 13:20
SERIES P
DESIGNATION DESIGNATION
Unit Designation e.g………
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
P
L
0
5
3
0
1
1
2
B
M
C
B
3
1
.
5
A
1 - 2 - 3 - 4 - 5 - 6 .... Unit Size / Type e.g. PL0110 PL0330 PL0520 PL1230 etc...
10 - 11 - 12.... Unit Options 12
11
10
C
7 - 8 - 9 .... Ratio (i N) e.g. 4.5 18. 112 10C etc....
H
13 - 14 .... Mounting Position e.g. B3 B5 etc....
R
B
S M
F P V6
V3
B3
B7
V5
B5
B6
V1
B8
18 ....
15 - 16 - 17 .... Units supplied complete with a motor enter the Motor Power (kW) e.g. .37 1.5 15. etc.... Units supplied for cutomers to fit their own motor enter the Frame Size e.g. 063 090 132 etc... For a non motorised unit enter ---
Motor Speed 4 pole (1450) 6 pole (960) 2 pole (2900) 8 pole (725)
A C E G
Units supplied without a motor fitted enter -
5 Benzler Series P Cat .indd 5
21/03/2013 13:20
SERIES P
N
NOMINAL TORQUE NOMINAL TORQUE
iN
1
2
3
4
3.6 4.5 6.3 7.1 16. 18. 22. 25. 28. 36. 40. 45. 56. 63. 71. 80. 90. 100 112 125 140 160 180 225 250 280 360 400 450 500 560 630 710 800 900 10C 11C 14C 16C 18C 20C 22C 25C 32C
T2 (Nm) PL01
PL02
1110 900 629 464 1110 1110 900 1110 1110 900 629 629 464 1110 1110 1110 1110 900 1110 1110 1110 900 1110 1110 900 629 629 464 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 629 900 629 629 464
2050 1661 1162 856 2050 2050 1661 2050 2050 1661 1162 1162 856 2050 2050 2050 2050 1661 2050 2050 2050 1661 2050 2050 1661 1162 1162 856 2050 2050 2050 2050 2050 2050 2050 2050 2050 2050 2050 1162 1661 1162 1162 856
T2 (Nm)
iN 3.6 4.5 5.6 7.1 14. 16. 20. 22. 25. 32. 36. 45. 50. 56. 71. 80. 90. 100 112 125 140 160 180 200 250 280 315 360 400 500 560 630 710 800 900 10C 11C 12C 14C 16C 18C 20C 22C 25C
PL03
PL05
3400 2887 2008 1494 3400 3400 2887 3400 3400 2887 2008 2008 1494 3400 3400 3400 3400 2887 3400 3400 3400 2887 3400 3400 2887 2008 2008 1494 3400 3400 3400 3400 3400 3400 3400 3400 3400 3400 3400 2008 2887 2008 2008 1494
5231 4442 3089 2298 5231 5231 4442 5231 5231 4442 3089 3089 2298 5231 5231 5231 5231 4442 5231 5231 5231 4442 5231 5231 4442 3089 3089 2298 5231 5231 5231 5231 5231 5231 5231 5231 5231 5231 5231 3089 4442 3089 3089 2298
iN 3.6 4.5 5.6 7.1 14. 16. 20. 22. 25. 28. 32. 36 45. 56. 63. 71. 80. 90. 100 112 125 140 160 180 225 250 280 360 400 450 500 560 630 710 800 900 10C 11C 12C 14C 16C 18C 20C 25C
T2 (Nm) PL08
PL12
9112 7490 5396 4564 9112 9112 7490 9112 9112 7490 5396 5396 4564 9112 9112 9112 9112 7490 9112 9112 9112 7490 9112 9112 7490 5396 5396 4564 9112 9112 9112 9112 9112 9112 9112 9112 9112 9112 9112 5396 7490 5396 5396 4564
11277 9996 7196 6084 11277 11277 9996 11277 11277 9996 7196 7196 6084 11277 11277 11277 11277 9996 11277 11277 11277 9996 11277 11277 9996 7196 7196 6084 11277 11277 11277 11277 11277 11277 11277 11277 11277 11277 11277 7196 9996 7196 7196 6084
6 Benzler Series P Cat .indd 6
21/03/2013 13:20
SERIES P
PL01
PL01
SERIES
Rati
Ratio
P
iN
i
10,000
25,000
50,000
100,000
3.6
3.89
1305
1224
1207
1110
946
769
4.5
4.71
1220
1123
986
900
824
751
PL0110
PL0120
PL0130
PL0140
T2 (Nm) - n2*h rating 500,000
1,000,000
n1 Max
Pt kW 15.4
3500
15.4
6.3
6.20
895
753
660
629
575
552
7.1
7.50
643
539
482
464
422
404
14.7 12.5
16.
15.12
1305
1224
1207
1110
946
769
8.9
18.
18.33
1305
1224
1207
1110
946
769
8.9
22.
22.22
1220
1123
986
900
824
751
8.9
25.
24.11
1305
1224
1207
1110
946
769
28.
29.17
1305
1224
1207
1110
946
769
36.
35.36
1220
1123
986
900
824
751
8.0
40.
38.44
895
753
660
629
575
552
8.5
8.7 3500
8.0
45.
46.50
895
753
660
629
575
552
7.8
56.
56.25
643
539
482
464
422
404
7.2
63.
58.81
1305
1224
1207
1110
946
769
6.2
71.
71.30
1305
1224
1207
1110
946
769
6.2
80.
86.43
1305
1224
1207
1110
946
769
6.2
90.
93.77
1305
1224
1207
1110
946
769
6.1
100
104.8
1220
1123
986
900
824
751
6.1
112
113.4
1305
1224
1207
1110
946
769
6.0
125
137.5
1305
1224
1207
1110
946
769
6.0 3500
140
149.5
1305
1224
1207
1110
946
769
160
166.7
1220
1123
986
900
824
751
6.0 5.8
180
180.8
1305
1224
1207
1110
946
769
5.8
225
218.8
1305
1224
1207
1110
946
769
5.7
250
265.2
1220
1123
986
900
824
751
5.7
280
288.3
895
753
660
629
575
552
5.6
360
348.8
895
753
660
629
575
552
5.6
400
421.9
643
539
482
464
422
404
5.6
450
441.1
1305
1224
1207
1110
946
769
4.6
500
534.7
1305
1224
1207
1110
946
769
4.6
560
581.3
1305
1224
1207
1110
946
769
4.6
630
648.2
1305
1224
1207
1110
946
769
4.6
710
703.2
1305
1224
1207
1110
946
769
4.5
800
850.7
1305
1224
1207
1110
946
769
4.5
900
926.8
1305
1224
1207
1110
946
769
4.5
10C
1031.3
1305
1224
1207
1110
946
769
11C
1121.2
1305
1224
1207
1110
946
769
14C
1356.3
1305
1224
1207
1110
946
769
4.3
16C
1640.6
1305
1224
1207
1110
946
769
4.3
18C
1787.5
895
753
660
629
575
552
4.3
20C
1988.8
1220
1123
986
900
824
751
4.3
22C
2162.3
895
753
660
629
575
552
4.3
25C
2615.6
895
753
660
629
575
552
4.3
32C
3164.1
643
539
482
464
422
404
4.3
3500
4.4 4.4
7 Benzler Series P Cat .indd 7
21/03/2013 13:20
SERIES P
PL01
PL01
L
227
12
Ø42 k6
122 82
22
6
70 Ø30 H7
48 Ø 50 H7
M16 DIN 332
125
45
20
132
190
172
230 B
A
38 12
4 - Ø14
7 13
8 - Ø9
6 180
20
70
41
Ø50
10
A40x36 DIN5482
Ø42 H7
L 5
PL0110 PL0120 PL0130 PL0140
30
15 57 99 141
60
5
Ø 38 k6
30
Ø 165
Ø 196 Ø110 f7
Ø35 f7
Ø42 f7
Ø24
55
22.5°
3-M6x20
5
Ø180
A B40x36 DIN5482
M12 DIN 332
B
L1
ØP
63 62 71 66 80 80 90 80 100-112 91 132 108
140 160 200 200 250 300
ØP
L1
8 Benzler Series P Cat .indd 8
21/03/2013 13:20
SERIES P
PL02 PL02
SERIES
Ratio
Ratio
P
iN
i
10,000
25,000
50,000
100,000
500,000
1,000,000
3.6
3.89
2398
2247
2215
2050
1622
1317
4.5
4.71
2239
2074
1820
1661
1523
1286
6.3
6.20
1655
1391
1219
1162
1063
1020
7.1
7.50
1188
996
891
856
780
745
13.0
16.
15.12
2398
2247
2215
2050
1622
1317
9.3
18.
18.33
2398
2247
2215
2050
1622
1317
9.3
22.
22.22
2239
2074
1820
1661
1523
1286
9.3
25.
24.11
2398
2247
2215
2050
1622
1317
9.0
28.
29.17
2398
2247
2215
2050
1622
1317
36.
35.36
2239
2074
1820
1661
1523
1286
8.2
40.
38.44
1655
1391
1219
1162
1063
1020
8.8
45.
46.50
1655
1391
1219
1162
1063
1020
8.1
56.
56.25
1188
996
891
856
780
745
7.4
63.
58.81
2398
2247
2215
2050
1622
1317
6.5
71.
71.30
2398
2247
2215
2050
1622
1317
6.5
80.
86.43
2398
2247
2215
2050
1622
1317
6.5
90.
93.77
2398
2247
2215
2050
1622
1317
6.3
100
104.8
2239
2074
1820
1661
1523
1286
6.3
112
113.4
2398
2247
2215
2050
1622
1317
6.2
125
137.5
2398
2247
2215
2050
1622
1317
6.2
140
149.5
2398
2247
2215
2050
1622
1317
160
166.7
2239
2074
1820
1661
1523
1286
6.0
180
180.8
2398
2247
2215
2050
1622
1317
6.0
225
218.8
2398
2247
2215
2050
1622
1317
5.9
250
265.2
2239
2074
1820
1661
1523
1286
5.9
280
288.3
1655
1391
1219
1162
1063
1020
5.8
360
348.8
1655
1391
1219
1162
1063
1020
5.8
400
421.9
1188
996
891
856
780
745
5.8
450
441.1
2398
2247
2215
2050
1622
1317
4.8
500
534.7
2398
2247
2215
2050
1622
1317
4.8
560
581.3
2398
2247
2215
2050
1622
1317
4.8
630
648.2
2398
2247
2215
2050
1622
1317
4.8
710
703.2
2398
2247
2215
2050
1622
1317
4.7
800
850.7
2398
2247
2215
2050
1622
1317
4.6
900
926.8
2398
2247
2215
2050
1622
1317
4.6
10C
1031.3
2398
2247
2215
2050
1622
1317
11C
1121.2
2398
2247
2215
2050
1622
1317
14C
1356.3
2398
2247
2215
2050
1622
1317
4.5
16C
1640.6
2398
2247
2215
2050
1622
1317
4.5
18C
1787.5
1655
1391
1219
1162
1063
1020
4.5
20C
1988.8
2239
2074
1820
1661
1523
1286
4.5
22C
2162.3
1655
1391
1219
1162
1063
1020
4.5
25C
2615.6
1655
1391
1219
1162
1063
1020
4.5
32C
3164.1
1188
996
891
856
780
745
4.5
PL0210
PL0220
PL0230
PL0240
T2 (Nm) - n2*h rating
n1 Max
Pt kW 16.0
3500
3500
3500
3500
16.0 15.3
8.2
6.2
4.5 4.5
9 Benzler Series P Cat .indd 9
21/03/2013 13:20
SERIES P
PL02 PL02
L
227
12
Ø42 k6
122 82
70
22
6
Ø30 H7
48 Ø 50 H7
M16 DIN 332
125
45
20
132
190
172
230 B
A
38 12
4 - Ø14
7 13
Ø 165
Ø196
8 - Ø9 30
6 180
20
70
41
Ø50
10
A40x36 DIN5482
Ø42 H7
L 5
PL0210 PL0220 PL0230 PL0240
30
26 68 110 152
60
5
Ø 38 k6
Ø110 f7
Ø35 f7
Ø42 f7
Ø24
55
22.5°
3-M6x20
5
Ø180
A B40x36 DIN5482
M12 DIN 332
B
L1
ØP
63 62 71 66 80 80 90 80 100-112 91 132 108
140 160 200 200 250 300
ØP
L1
10 Benzler Series P Cat .indd 10
21/03/2013 13:20
SERIES P
PL03
PL03
SERIES
Ratio
Ratio
P
iN
i
10,000
25,000
50,000
100,000
500,000
1,000,000
3.6
3.64
3930
3700
3648
3400
2536
2060
4.5
4.36
3598
3350
3199
2887
2493
2025
5.6
5.63
2891
2432
2137
2008
1838
1765
7.1
6.69
2100
1764
1553
1494
1364
1306
23.5
14.
14.17
3930
3700
3648
3400
2536
2060
15.9
16.
17.17
3930
3700
3648
3400
2536
2060
15.9
20.
20.57
3598
3350
3199
2887
2493
2025
15.9
22.
22.59
3930
3700
3648
3400
2536
2060
15.5
25.
27.32
3930
3700
3648
3400
2536
2060
32.
32.73
3598
3350
3199
2887
2493
2025
14.1
36.
34.88
2891
2432
2137
2008
1838
1765
15.1
45.
42.19
2891
2432
2137
2008
1838
1765
13.8
50.
50.19
2100
1764
1553
1494
1364
1306
12.7
56.
55.09
3930
3700
3648
3400
2536
2060
11.1
71.
66.79
3930
3700
3648
3400
2536
2060
11.1
80.
80.96
3930
3700
3648
3400
2536
2060
11.1
90.
87.83
3930
3700
3648
3400
2536
2060
10.9
100
96.98
3598
3350
3199
2887
2493
2025
10.9
112
106.5
3930
3700
3648
3400
2536
2060
10.6
125
128.8
3930
3700
3648
3400
2536
2060
10.6
140
140.0
3930
3700
3648
3400
2536
2060
160
154.3
3598
3350
3199
2887
2493
2025
10.4
180
169.4
3930
3700
3648
3400
2536
2060
10.4
200
204.9
3930
3700
3648
3400
2536
2060
10.2
250
245.5
3598
3350
3199
2887
2493
2025
10.2
280
261.6
2891
2432
2137
2008
1838
1765
10.0
315
316.4
2891
2432
2137
2008
1838
1765
10.0
360
376.4
2100
1764
1553
1494
1364
1306
10.0
400
413.2
3930
3700
3648
3400
2536
2060
8.1
500
500.9
3930
3700
3648
3400
2536
2060
8.1
560
544.6
3930
3700
3648
3400
2536
2060
8.1
630
607.2
3930
3700
3648
3400
2536
2060
8.1
710
658.8
3930
3700
3648
3400
2536
2060
8.0
800
796.9
3930
3700
3648
3400
2536
2060
7.8
900
868.2
3930
3700
3648
3400
2536
2060
7.8
10C
966.0
3930
3700
3648
3400
2536
2060
11C
1050.2
3930
3700
3648
3400
2536
2060
12C
1270.4
3930
3700
3648
3400
2536
2060
7.6
14C
1536.8
3930
3700
3648
3400
2536
2060
7.6
16C
1621.7
2891
2432
2137
2008
1838
1765
7.6
18C
1840.9
3598
3350
3199
2887
2493
2025
7.6
20C
1961.7
2891
2432
2137
2008
1838
1765
7.6
22C
2373.0
2891
2432
2137
2008
1838
1765
7.6
25C
2823.3
2100
1764
1553
1494
1364
1306
7.6
PL0310
PL0320
PL0330
PL0340
T2 (Nm) - n2*h rating
n1 Max
Pt kW 29.0
2800
3500
3500
3500
29.0 27.6
14.1
10.6
7.7 7.7
11 Benzler Series P Cat .indd 11
21/03/2013 13:20
SERIES P
PL03
189
L
285
105
36
7
90 Ø40 H7
70 Ø75 H7
M20 DIN 332
160
69
29
180
250
236
310 B
A
70 25
15 36 °
68
Ø150 f7
38
K
28
E
L
8
43
28 84.5 126.5 168.5
PL0320 PL0310 PL0310 PL0330 PL0340 L1 ØP 228 180 63 240 196 71 48 38 80 M16 M12 90 51.5 41 100-112 14 10 132 140 300 82 70 160 156 350 70 60 180 156 350 6 5
PL0320 PL0330 PL0340 L1 ØP 62 140 66 160 80 200 80 200 91 250 108 300 -
u
PL0310 PL0320 PL0330 PL0340
E1
B
t
E2
d2 DIN 332
L1
ØP
Ø74 Ø60 H7
5
ØM
Ø50 f7
10 - Ø14
A58x53 DIN5482
K M d d2 t u E E1 E2
Ø 240
Ø60 f7
Ø32 3-M10x20
8
Ø220
A
Ø 195
16 B58x53 DIN5482
4 - Ø22
Ød (k6)
18
Ø65 m6
PL03
12 Benzler Series P Cat .indd 12
21/03/2013 13:20
SERIES P
PL05
PL05
SERIES
Ratio
Ratio
P
iN
i
10,000
25,000
50,000
100,000
500,000
1,000,000
3.6
3.64
6028
5675
5595
5231
3556
2889
4.5
4.36
5519
5139
4920
4442
3498
2841
5.6
5.63
4448
3742
3287
3089
2828
2716
7.1
6.69
3232
2715
2389
2298
2099
2010
24.5
14.
14.17
6028
5675
5595
5231
3556
2889
16.6
16.
17.17
6028
5675
5595
5231
3556
2889
16.6
20.
20.57
5519
5139
4920
4442
3498
2841
16.6
22.
22.59
6028
5675
5595
5231
3556
2889
16.1
25.
27.32
6028
5675
5595
5231
3556
2889
32.
32.73
5519
5139
4920
4442
3498
2841
14.7
36.
34.88
4448
3742
3287
3089
2828
2716
15.7
45.
42.19
4448
3742
3287
3089
2828
2716
14.4
50.
50.19
3232
2715
2389
2298
2099
2010
13.3
56.
55.09
6028
5675
5595
5231
3556
2889
11.6
71.
66.79
6028
5675
5595
5231
3556
2889
11.6
80.
80.96
6028
5675
5595
5231
3556
2889
11.6
PL0510
PL0520
PL0530
PL0540
T2 (Nm) - n2*h rating
n1 Max
Pt kW 30.2
2800
3500
30.2 28.8
14.7
90.
87.83
6028
5675
5595
5231
3556
2889
11.4
100
96.98
5519
5139
4920
4442
3498
2841
11.3
112
106.5
6028
5675
5595
5231
3556
2889
11.1
125
128.8
6028
5675
5595
5231
3556
2889
11.1
140
140.0
6028
5675
5595
5231
3556
2889
160
154.3
5519
5139
4920
4442
3498
2841
10.8
180
169.4
6028
5675
5595
5231
3556
2889
10.8
200
204.9
6028
5675
5595
5231
3556
2889
10.6
250
245.5
5519
5139
4920
4442
3498
2841
10.6
280
261.6
4448
3742
3287
3089
2828
2716
10.4
315
316.4
4448
3742
3287
3089
2828
2716
10.4
360
376.4
3232
2715
2389
2298
2099
2010
10.4
400
413.2
6028
5675
5595
5231
3556
2889
8.4
500
500.9
6028
5675
5595
5231
3556
2889
8.4
560
544.6
6028
5675
5595
5231
3556
2889
8.4
630
607.2
6028
5675
5595
5231
3556
2889
8.4
710
658.8
6028
5675
5595
5231
3556
2889
8.3
800
796.9
6028
5675
5595
5231
3556
2889
8.2
3500
11.1
900
868.2
6028
5675
5595
5231
3556
2889
8.2
10C
966.0
6028
5675
5595
5231
3556
2889
8.0
11C
1050.2
6028
5675
5595
5231
3556
2889
12C
1270.4
6028
5675
5595
5231
3556
2889
7.9
14C
1536.8
6028
5675
5595
5231
3556
2889
7.9
16C
1621.7
4448
3742
3287
3089
2828
2716
7.9
18C
1840.9
5519
5139
4920
4442
3498
2841
7.9
20C
1961.7
4448
3742
3287
3089
2828
2716
7.9
22C
2373.0
4448
3742
3287
3089
2828
2716
7.9
25C
2823.3
3232
2715
2389
2298
2099
2010
7.9
3500
8.0
13 Benzler Series P Cat .indd 13
21/03/2013 13:20
SERIES P
PL05
189
L
285
105
36
7
90 Ø40 H7
70 Ø75 H7
M20 DIN 332
160
69
29
180
250
236
310 B
A
70 25
15 36°
68
Ø150 f7
38
K
28
E
L
8
43
42 109.5 151.5 193.5
PL0520 PL0510 PL0510 PL0530 PL0540 L1 ØP 228 180 63 240 196 71 48 38 80 M16 M12 90 51.5 41 100-112 14 10 132 140 300 82 70 160 156 350 70 60 180 156 350 6 5
PL0520 PL0530 PL0540 L1 ØP 62 140 66 160 80 200 80 200 91 250 108 300 -
u
PL0510 PL0520 PL0530 PL0540
E1
B
t
E2
d2 DIN 332
L1
ØP
Ø74 Ø60 H7
5
ØM
Ø50 f7
10 - Ø14
A58x53 DIN5482
K M d d2 t u E E1 E2
Ø 240
Ø60 f7
Ø40 3-M10x20
8
Ø220
A
Ø 195
16 B58x53 DIN5482
4 - Ø22
Ød (k6)
18
Ø65 m6
PL05
14 Benzler Series P Cat .indd 14
21/03/2013 13:20
SERIES P
PL08
PL08
SERIES
Ratio
Ratio
P
iN
i
10,000
25,000
50,000
100,000
500,000
1,000,000
3.6
3.64
10669
10034
9889
9112
5622
4567
4.5
4.36
10055
9330
8295
7490
5502
4469
PL0810
PL0820
PL0830
PL0840
T2 (Nm) - n2*h rating
n1 Max
Pt kW 44.4
2500
44.4
5.6
5.63
7742
6521
5734
5396
4949
4341
7.1
6.69
6389
5377
4740
4564
4180
4014
36.0
14.
13.27
10669
10034
9889
9112
5622
4567
27.6
16.
15.90
10669
10034
9889
9112
5622
4567
27.6
20.
19.04
10055
9330
8295
7490
5502
4469
27.6
22.
20.49
10669
10034
9889
9112
5622
4567
26.9
25.
24.38
10669
10034
9889
9112
5622
4567
28.
29.20
10055
9330
8295
7490
5502
4469
24.5
32.
31.64
7742
6521
5734
5396
4949
4341
26.2
2800
42.4
24.5
36.
37.64
7742
6521
5734
5396
4949
4341
24.0
45.
44.79
6389
5377
4740
4564
4180
4014
22.1
56.
51.61
10669
10034
9889
9112
5622
4567
18.8
63.
62.56
10669
10034
9889
9112
5622
4567
18.8
71.
74.94
10669
10034
9889
9112
5622
4567
18.8
80.
82.28
10669
10034
9889
9112
5622
4567
18.5
90.
89.77
10055
9330
8295
7490
5502
4469
18.4
100
98.56
10669
10034
9889
9112
5622
4567
18.0
112
119.2
10669
10034
9889
9112
5622
4567
125
127.0
10669
10034
9889
9112
5622
4567
140
142.8
10055
9330
8295
7490
5502
4469
17.6
160
153.7
10669
10034
9889
9112
5622
4567
17.6
180
182.8
10669
10034
9889
9112
5622
4567
17.3
225
219.0
10055
9330
8295
7490
5502
4469
17.3
250
237.3
7742
6521
5734
5396
4949
4341
16.9
280
282.3
7742
6521
5734
5396
4949
4341
16.9
360
335.9
6389
5377
4740
4564
4180
4014
16.9
400
387.1
10669
10034
9889
9112
5622
4567
14.2
450
469.2
10669
10034
9889
9112
5622
4567
14.2
500
510.1
10669
10034
9889
9112
5622
4567
14.2
560
562.0
10669
10034
9889
9112
5622
4567
14.2
630
617.1
10669
10034
9889
9112
5622
4567
14.0
710
746.5
10669
10034
9889
9112
5622
4567
13.8
800
787.7
10669
10034
9889
9112
5622
4567
13.8
900
894.2
10669
10034
9889
9112
5622
4567
18.0 3500
3500
18.0
13.6
10C
952.8
10669
10034
9889
9112
5622
4567
11C
1152.6
10669
10034
9889
9112
5622
4567
13.4
13.6
12C
1371.3
10669
10034
9889
9112
5622
4567
13.4
14C
1471.3
7742
6521
5734
5396
4949
4341
13.4
16C
1642.7
10055
9330
8295
7490
5502
4469
13.4
18C
1779.8
7742
6521
5734
5396
4949
4341
13.4
20C
2117.5
7742
6521
5734
5396
4949
4341
13.4
25C
2519.3
6389
5377
4740
4564
4180
4014
13.4
15 Benzler Series P Cat .indd 15
21/03/2013 13:20
SERIES P
PL08
206.5
L
350
130
10
42
M20 DIN 332
110 Ø50 H7
93 Ø90 H7
200
85
35
225
300
295
370 B
A
100 35
40
30 °
Ø 291
90
50 43.5
K E
9
58
PL0810 PL0820 PL0830 PL0840 K 259.5 228 180 M 291 240 196 d 65(m6) 48(k6) 38(k6) d2 M20 M16 M12 t 69 51.5 41 u 18 14 10 E 105 82 70 E1 90 70 60 E2 7.5 6 5
PL0830 PL0840 L1 ØP L1 ØP L1 ØP 63 62 140 71 66 160 80 80 200 90 80 200 100-112 91 250 132 140 300 108 300 160 172 350 156 350 180 172 350 156 350 200 174 400 PL0810
PL0820
u
50 134.5 191 233
ØM
PL0810 PL0820 PL0830 PL0840
E1
B
t
E2
d2 DIN 332
L1
ØP
Ø72 H7
20
L
Ø89
A70x64 DIN5482
Ø200 f7
12 - Ø16
Ø62 f7
Ø72 f7
Ø40 3-M10x20
10
Ø280
A
Ø 250
20 B70x64 DIN5482
4 - Ø26
Ød
22
Ø80 m6
PL08
16 Benzler Series P Cat .indd 16
21/03/2013 13:20
SERIES P
PL12
PL12
SERIES
Ratio
Ratio
P
iN
i
10,000
25,000
50,000
100,000
500,000
1,000,000
3.6
3.64
14202
13356
13168
11277
6958
5652
4.5
4.36
13385
12420
11064
9996
6813
5534
5.6
5.63
10324
8700
7655
7196
6597
5375
PL1210
PL1220
PL1230
PL1240
T2 (Nm) - n2*h rating
n1 Max
Pt kW 46.3
2500
46.3 44.1
7.1
6.69
8519
7170
6323
6084
5573
5325
37.5
14.
13.27
14202
13356
13168
11277
6958
5652
29.1
16.
15.90
14202
13356
13168
11277
6958
5652
29.1
20.
19.04
13385
12420
11064
9996
6813
5534
29.1
22.
20.49
14202
13356
13168
11277
6958
5652
28.4
25.
24.38
14202
13356
13168
11277
6958
5652
28.
29.20
13385
12420
11064
9996
6813
5534
25.9
32.
31.64
10324
8700
7655
7196
6597
5375
27.7
36.
37.64
10324
8700
7655
7196
6597
5375
25.3
45.
44.79
8519
7170
6323
6084
5573
5325
23.4
56.
51.61
14202
13356
13168
11277
6958
5652
20.5
63.
62.56
14202
13356
13168
11277
6958
5652
20.5
71.
74.94
14202
13356
13168
11277
6958
5652
20.5
80.
82.28
14202
13356
13168
11277
6958
5652
20.2
2800
25.9
90.
89.77
13385
12420
11064
9996
6813
5534
20.0
100
98.56
14202
13356
13168
11277
6958
5652
19.6
112
119.2
14202
13356
13168
11277
6958
5652
125
127.0
14202
13356
13168
11277
6958
5652
140
142.8
13385
12420
11064
9996
6813
5534
19.2
160
153.7
14202
13356
13168
11277
6958
5652
19.2
180
182.8
14202
13356
13168
11277
6958
5652
18.8
225
219.0
13385
12420
11064
9996
6813
5534
18.8
250
237.3
10324
8700
7655
7196
6597
5375
18.4
280
282.3
10324
8700
7655
7196
6597
5375
18.4
360
335.9
8519
7170
6323
6084
5573
5325
18.4
400
387.1
14202
13356
13168
11277
6958
5652
15.5
450
469.2
14202
13356
13168
11277
6958
5652
15.5
500
510.1
14202
13356
13168
11277
6958
5652
15.5
560
562.0
14202
13356
13168
11277
6958
5652
15.5
630
617.1
14202
13356
13168
11277
6958
5652
15.3
710
746.5
14202
13356
13168
11277
6958
5652
15.0
800
787.7
14202
13356
13168
11277
6958
5652
15.0
19.6 3500
19.6
900
894.2
14202
13356
13168
11277
6958
5652
10C
952.8
14202
13356
13168
11277
6958
5652
11C
1152.6
14202
13356
13168
11277
6958
5652
14.6
12C
1371.3
14202
13356
13168
11277
6958
5652
14.6
14C
1471.3
10324
8700
7655
7196
6597
5375
14.6
16C
1642.7
13385
12420
11064
9996
6813
5534
14.6
18C
1779.8
10324
8700
7655
7196
6597
5375
14.6
20C
2117.5
10324
8700
7655
7196
6597
5375
14.6
25C
2519.3
8519
7170
6323
6084
5573
5325
14.6
3500
14.8 14.8
17 Benzler Series P Cat .indd 17
21/03/2013 13:20
SERIES P
PL12
206.5
L
350
130
42
10
M20 DIN 332
110 Ø50 H7
93 Ø90 H7
200
85
35
225
300
295
370 B
A
100 35
40
30 °
12 - Ø16 50 43.5
K E
58
PL1210
PL1220
L1 ØP L1 ØP 63 228 180 71 240 196 80 48(k6) 38(k6) 90 M16 M12 100-112 51.5 41 132 140 300 14 10 160 172 350 156 350 82 70 180 172 350 156 350 70 60 200 174 400 6 5
PL1230 PL1240 L1 ØP 62 140 66 160 80 200 80 200 91 250 108 300 -
u
66 164.5 232.5 274.5
ØM
PL1210 PL1220 PL1230 PL1240
E1
B
t
E2
d2 DIN 332
L1
ØP
Ø72 H7
9
PL1210 PL1220 PL1230 PL1240 259.5 291 65(m6) M20 69 18 105 90 7.5
20
L
Ø89
A70x64 DIN5482
K M d d2 t u E E1 E2
Ø 291
Ø280
90
Ø200 f7
3-M10x20
10
Ø62 f7
Ø40
Ø72 f7
B70x64 DIN5482
Ø 250
20 A
4 - Ø26
Ød
22
Ø80 m6
PL12
18 Benzler Series P Cat .indd 18
21/03/2013 13:20
SERIES P
OVERHUNG LOADS
OVERHUNG LOADS
PL01 - PL02 PL03 - PL05 PL08 - PL12
L
82 105 130
Fr2
Fr1
1 A
a E
L
2 3
Fr1
(n1 x h = 10,000,000
PL0110 - PL0210 PL0120 - PL0220 PL0130 - PL0230 PL0140 - PL0240 PL0320 - PL0520 PL0330 - PL0530 PL0340 - PL0540 PL0830 - PL1230 PL0840 - PL1240 PL0310 - PL0510 PL0820 - PL1220 PL0810 - PL1210
E 70
82 105
Fa = 0)
3 2 1
Fr2
(n2 x h = 100,000
Fa = 0)
PL08 – PL12 PL03 – PL05 PL01 – PL02
19 Benzler Series P Cat .indd 19
21/03/2013 13:20
SERIES P
MOTORISED RATINGS MOTORISED RATINGS
0.12 kW 4-pole
0.18 kW 4-pole
n2
Ratio i
M2 (Nm)
3.3 2.7 2.5 2.2 2.1 1.7 1.6 1.4 1.3 1.1 0.88
219 265 320
fm
2.88 2.38 1.45
Fr2 (N) 13000 13000 13000
PL0130 PL0130 PL0130
441.10 534.72 581.35 648.21 703.24 850.69 926.83 1031.25 1121.17 1356.25 1640.63
331 401 436 487 528 639 696 774 842 1018 1232
3.35 2.76 2.54 2.28 2.10 1.74 1.60 1.43 1.32 1.09 0.90
13000 13000 13000 13000 13000 13000 13000 13000 13000 13000 13000
2.1 1.7 1.6 1.4 1.3 1.1 0.88 0.81 0.73
703.24 850.69 926.83 1031.25 1121.17 1356.25 1640.63 1787.46 1988.84
528 639 696 774 842 1018 1232 1342 1493
3.88 3.21 2.95 2.65 2.44 2.01 1.66 0.87 1.11
1.1 0.93 0.88 0.78 0.73 0.60
1270.45 1536.83 1621.69 1840.91 1961.72 2373.05
967 1170 1235 1402 1494 1807
0.78 0.73 0.60 0.51
1840.91 1961.72 2373.05 2823.32
0.87 0.80 0.68 0.57
5.0 4.2 3.4
288.30 348.75 421.88
Unit Designation
Motor Frame
Pt (kW)
280 360 400
-M ---M ---M ---
.12 .12 .12
A A A
63 63 63
5.6 5.6 5.6
PL0140 PL0140 PL0140 PL0140 PL0140 PL0140 PL0140 PL0140 PL0140 PL0140 PL0140
450 500 560 630 710 800 900 10C 11C 14C 16C
-M -M -M -M -M -M -M -M -M -M -M
-----------------------
.12 .12 .12 .12 .12 .12 .12 .12 .12 .12 .12
A A A A A A A A A A A
63 63 63 63 63 63 63 63 63 63 63
4.6 4.6 4.6 4.6 4.5 4.5 4.5 4.4 4.4 4.3 4.3
13000 13000 13000 13000 13000 13000 13000 13000 13000
PL0240 PL0240 PL0240 PL0240 PL0240 PL0240 PL0240 PL0240 PL0240
710 800 900 10C 11C 14C 16C 18C 20C
-M---M---M---M---M---M---M---M---M---
.12 .12 .12 .12 .12 .12 .12 .12 .12
A A A A A A A A A
63 63 63 63 63 63 63 63 63
4.8 4.7 4.6 4.6 4.5 4.5 4.5 4.5 4.5
3.52 2.91 1.63 2.06 1.34 1.11
28500 28500 28500 28500 28500 28500
PL0340 PL0340 PL0340 PL0340 PL0340 PL0340
11C 12C 14C 16C 18C 20C
-M---M---M---M---M---M---
.12 .12 .12 .12 .12 .12
A A A A A A
63 63 63 63 63 63
7.7 7.6 7.6 7.6 7.6 7.6
1402 1494 1807 2149
3.17 2.07 1.71 1.07
28500 28500 28500 28500
PL0540 PL0540 PL0540 PL0540
16C 18C 20C 22C
-M---M---M---M---
.12 .12 .12 .12
A A A A
63 63 63 63
7.9 7.9 7.9 7.9
1642.66 1779.79 2117.49 2519.27
1251 1355 1612 1918
5.99 3.98 3.35 2.38
41000 41000 41000 41000
PL0840 PL0840 PL0840 PL0840
16C 18C 20C 25C
-M---M---M---M---
.12 .12 .12 .12
A A A A
63 63 63 63
13.4 13.4 13.4 13.4
0.57
2519.27
1918
3.17
41000
PL1240
25C
-M---
.12
A
63
15.5
5.5 5.0 4.2 3.4
265.18 288.30 348.75 421.88
302 328 397 480
2.98 1.92 1.58 0.97
13000 13000 13000 13000
PL0130 PL0130 PL0130 PL0130
250 280 360 400
-M -M -M -M
---------
.18 .18 .18 .18
A A A A
63 63 63 63
5.7 5.6 5.6 5.6
3.3 2.7 2.5 2.2 2.1 1.7 1.6 1.4 1.3
441.10 534.72 581.35 648.21 703.24 850.69 926.83 1031.25 1121.17
497 602 655 730 792 958 1044 1161 1263
2.23 1.84 1.70 1.52 1.40 1.16 1.06 0.96 0.88
13000 13000 13000 13000 13000 13000 13000 13000 13000
PL0140 PL0140 PL0140 PL0140 PL0140 PL0140 PL0140 PL0140 PL0140
450 500 560 630 710 800 900 10C 11C
-M -M -M -M -M -M -M -M -M
-------------------
.18 .18 .18 .18 .18 .18 .18 .18 .18
A A A A A A A A A
63 63 63 63 63 63 63 63 63
4.6 4.6 4.6 4.6 4.5 4.5 4.5 4.4 4.4
5.0 4.2 3.4
288.30 348.75 421.88
328 397 480
3.54 2.93 1.78
13000 13000 13000
PL0230 PL0230 PL0230
280 360 400
-M---M---M---
.18 .18 .18
A A A
63 63 63
5.8 5.8 5.8
2.7 2.5 2.2 2.1
534.72 581.35 648.21 703.24
602 655 730 792
3.40 3.13 2.81 2.59
13000 13000 13000 13000
PL0240 PL0240 PL0240 PL0240
500 560 630 710
-M---M---M---M---
.18 .18 .18 .18
A A A A
63 63 63 63
4.8 4.8 4.8 4.8
20 Benzler Series P Cat .indd 20
21/03/2013 13:20
SERIES P
MOTORISED RATINGS MOTORISED RATINGS
1.7 1.6 1.4 1.3 1.1 0.88
Ratio i
850.69 926.83 1031.25 1121.17 1356.25 1640.63
M2 (Nm)
1.6 1.5 1.4 1.1 0.93 0.88 0.78 0.73
n2
0.18 kW 4-pole
0.25 kW 4-pole
958 1044 1161 1263 1527 1848
fm
2.14 1.96 1.77 1.62 1.34 1.11
Fr2 (N) 13000 13000 13000 13000 13000 13000
PL0240 PL0240 PL0240 PL0240 PL0240 PL0240
868.19 966.01 1050.24 1270.45 1536.83 1621.69 1840.91 1961.72
991 1103 1199 1451 1755 1852 2102 2240
3.43 3.08 2.83 2.34 1.94 1.08 1.37 0.90
28500 28500 28500 28500 28500 28500 28500 28500
1.1 0.93 0.88 0.78 0.73 0.60
1270.45 1536.83 1621.69 1840.91 1961.72 2373.05
1451 1755 1852 2102 2240 2710
3.61 2.98 1.67 2.11 1.38 1.14
0.87 0.80 0.68 0.57
1642.66 1779.79 2117.49 2519.27
1876 2033 2418 2877
0.68 0.57
2117.49 2519.27
8.7 8.0 6.6 5.5 5.0 4.2
Unit Designation
Motor Frame
Pt (kW)
800 900 10C 11C 14C 16C
-M---M---M---M---M---M---
.18 .18 .18 .18 .18 .18
A A A A A A
63 63 63 63 63 63
4.7 4.6 4.6 4.5 4.5 4.5
PL0340 PL0340 PL0340 PL0340 PL0340 PL0340 PL0340 PL0340
900 10C 11C 12C 14C 16C 18C 20C
-M---M---M---M---M---M---M---M---
.18 .18 .18 .18 .18 .18 .18 .18
A A A A A A A A
63 63 63 63 63 63 63 63
7.8 7.7 7.7 7.6 7.6 7.6 7.6 7.6
28500 28500 28500 28500 28500 28500
PL0540 PL0540 PL0540 PL0540 PL0540 PL0540
12C 14C 16C 18C 20C 22C
-M---M---M---M---M---M---
.18 .18 .18 .18 .18 .18
A A A A A A
63 63 63 63 63 63
7.9 7.9 7.9 7.9 7.9 7.9
3.99 2.65 2.23 1.59
41000 41000 41000 41000
PL0840 PL0840 PL0840 PL0840
16C 18C 20C 25C
-M---M---M---M---
.18 .18 .18 .18
A A A A
63 63 63 63
13.4 13.4 13.4 13.4
2418 2877
2.98 2.11
41000 41000
PL1240 PL1240
20C 25C
-M---M---
.18 .18
A A
63 63
14.6 14.6
166.68 180.83 218.75 265.18 288.30 348.75
263 286 346 419 456 551
3.42 3.88 3.21 2.15 1.38 1.14
13000 13000 13000 13000 13000 13000
PL0130 PL0130 PL0130 PL0130 PL0130 PL0130
160 180 225 250 280 360
-M -M -M -M -M -M
-------------
.25 .25 .25 .25 .25 .25
A A A A A A
71 71 71 71 71 71
5.8 5.8 5.7 5.7 5.6 5.6
3.3 2.7 2.5 2.2
441.10 534.72 581.35 648.21
690 836 909 1014
1.61 1.33 1.22 1.09
13000 13000 13000 13000
PL0140 PL0140 PL0140 PL0140
450 500 560 630
-M -M -M -M
---------
.25 .25 .25 .25
A A A A
71 71 71 71
4.6 4.6 4.6 4.6
5.5 5.0 4.2 3.4
265.18 288.30 348.75 421.88
419 456 551 667
3.96 2.55 2.11 1.28
13000 13000 13000 13000
PL0230 PL0230 PL0230 PL0230
250 280 360 400
-M---M---M---M---
.25 .25 .25 .25
A A A A
71 71 71 71
5.9 5.8 5.8 5.8
3.3 2.7 2.5 2.2 2.1 1.7 1.6 1.4 1.3 1.1 0.88
441.10 534.72 581.35 648.21 703.24 850.69 926.83 1031.25 1121.17 1356.25 1640.63
690 836 909 1014 1100 1331 1450 1613 1754 2121 2566
2.97 2.45 2.25 2.02 1.86 1.54 1.41 1.27 1.17 0.97 0.80
13000 13000 13000 13000 13000 13000 13000 13000 13000 13000 13000
PL0240 PL0240 PL0240 PL0240 PL0240 PL0240 PL0240 PL0240 PL0240 PL0240 PL0240
450 500 560 630 710 800 900 10C 11C 14C 16C
-M---M---M---M---M---M---M---M---M---M---M---
.25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25
A A A A A A A A A A A
71 71 71 71 71 71 71 71 71 71 71
4.8 4.8 4.8 4.8 4.7 4.6 4.6 4.5 4.5 4.5 4.5
4.5 3.8
316.41 376.44
507 603
3.96 2.48
28500 28500
PL0330 PL0330
315 360
-M---M---
.25 .25
A A
71 71
10.0 10.0
2.4 2.2 1.8 1.6 1.5 1.4 1.1 0.93 0.88
607.20 658.75 796.88 868.19 966.01 1050.24 1270.45 1536.83 1621.69
963 1045 1264 1377 1532 1666 2015 2438 2572
3.53 3.25 2.69 2.47 2.22 2.04 1.69 1.39 0.78
28500 28500 28500 28500 28500 28500 28500 28500 28500
PL0340 PL0340 PL0340 PL0340 PL0340 PL0340 PL0340 PL0340 PL0340
630 710 800 900 10C 11C 12C 14C 16C
-M---M---M---M---M---M---M---M---M---
.25 .25 .25 .25 .25 .25 .25 .25 .25
A A A A A A A A A
71 71 71 71 71 71 71 71 71
8.1 8.0 7.8 7.8 7.7 7.7 7.6 7.6 7.6
21 Benzler Series P Cat .indd 21
21/03/2013 13:20
SERIES P
MOTORISED RATINGS MOTORISED RATINGS
1.6 1.5 1.4 1.1 0.93 0.88 0.78 0.73 0.60
Ratio i
868.19 966.01 1050.24 1270.45 1536.83 1621.69 1840.91 1961.72 2373.05
M2 (Nm)
1.0 0.97 0.87 0.80 0.68 0.57
n2
0.25 kW 4-pole
0.37 kW 4-pole
1377 1532 1666 2015 2438 2572 2920 3111 3764
fm
3.80 3.41 3.14 2.60 2.15 1.20 1.52 0.99 0.82
Fr2 (N) 28500 28500 28500 28500 28500 28500 28500 28500 28500
PL0540 PL0540 PL0540 PL0540 PL0540 PL0540 PL0540 PL0540 PL0540
1371.33 1471.29 1642.66 1779.79 2117.49 2519.27
2175 2334 2605 2823 3359 3996
4.19 2.31 2.87 1.91 1.61 1.14
41000 41000 41000 41000 41000 41000
0.87 0.80 0.68 0.57
1642.66 1779.79 2117.49 2519.27
2605 2823 3359 3996
3.84 2.55 2.14 1.52
13.8 12.8 10.5 9.7 8.7 8.0 6.6 5.5 5.0
104.77 113.43 137.50 149.49 166.68 180.83 218.75 265.18 288.30
245 265 322 350 390 423 512 620 674
6.6 5.5 5.0 4.2 3.4
218.75 265.18 288.30 348.75 421.88
3.3 2.7 2.5 2.2 2.1 1.7 1.6 1.4
Unit Designation
Motor Frame
Pt (kW)
900 10C 11C 12C 14C 16C 18C 20C 22C
-M---M---M---M---M---M---M---M---M---
.25 .25 .25 .25 .25 .25 .25 .25 .25
A A A A A A A A A
71 71 71 71 71 71 71 71 71
8.4 8.3 8.2 8.2 8.0 8.0 7.9 7.9 7.9
PL0840 PL0840 PL0840 PL0840 PL0840 PL0840
12C 14C 16C 18C 20C 25C
-M---M---M---M---M---M---
.25 .25 .25 .25 .25 .25
A A A A A A
71 71 71 71 71 71
13.4 13.4 13.4 13.4 13.4 13.4
41000 41000 41000 41000
PL1240 PL1240 PL1240 PL1240
16C 18C 20C 25C
-M---M---M---M---
.25 .25 .25 .25
A A A A
71 71 71 71
14.6 14.6 14.6 14.6
3.67 4.18 3.45 3.17 2.31 2.62 2.17 1.45 0.93
13000 13000 13000 13000 13000 13000 13000 13000 13000
PL0130 PL0130 PL0130 PL0130 PL0130 PL0130 PL0130 PL0130 PL0130
100 112 125 140 160 180 225 250 280
-M -M -M -M -M -M -M -M -M
-------------------
.37 .37 .37 .37 .37 .37 .37 .37 .37
A A A A A A A A A
71 71 71 71 71 71 71 71 71
6.1 6.0 6.0 6.0 5.8 5.8 5.7 5.7 5.6
512 620 674 816 987
4.01 2.68 1.72 1.42 0.87
13000 13000 13000 13000 13000
PL0230 PL0230 PL0230 PL0230 PL0230
225 250 280 360 400
-M---M---M---M---M---
.37 .37 .37 .37 .37
A A A A A
71 71 71 71 71
5.9 5.9 5.8 5.8 5.8
441.10 534.72 581.35 648.21 703.24 850.69 926.83 1031.25
1021 1238 1346 1501 1628 1969 2146 2387
2.01 1.66 1.52 1.37 1.26 1.04 0.96 0.86
13000 13000 13000 13000 13000 13000 13000 13000
PL0240 PL0240 PL0240 PL0240 PL0240 PL0240 PL0240 PL0240
450 500 560 630 710 800 900 10C
-M---M---M---M---M---M---M---M---
.37 .37 .37 .37 .37 .37 .37 .37
A A A A A A A A
71 71 71 71 71 71 71 71
4.8 4.8 4.8 4.8 4.7 4.6 4.6 4.5
5.5 4.5 3.8
261.56 316.41 376.44
620 751 893
3.24 2.68 1.67
28500 28500 28500
PL0330 PL0330 PL0330
280 315 360
-M---M---M---
.37 .37 .37
A A A
71 71 71
10.0 10.0 10.0
3.5 2.9 2.6 2.4 2.2 1.8 1.6 1.5 1.4 1.1 0.93
413.19 500.89 544.57 607.20 658.75 796.88 868.19 966.01 1050.24 1270.45 1536.83
970 1176 1278 1425 1546 1871 2038 2268 2465 2982 3608
3.51 2.89 2.66 2.39 2.20 1.82 1.67 1.50 1.38 1.14 0.94
28500 28500 28500 28500 28500 28500 28500 28500 28500 28500 28500
PL0340 PL0340 PL0340 PL0340 PL0340 PL0340 PL0340 PL0340 PL0340 PL0340 PL0340
400 500 560 630 710 800 900 10C 11C 12C 14C
-M---M---M---M---M---M---M---M---M---M---M---
.37 .37 .37 .37 .37 .37 .37 .37 .37 .37 .37
A A A A A A A A A A A
71 71 71 71 71 71 71 71 71 71 71
8.1 8.1 8.1 8.1 8.0 7.8 7.8 7.7 7.7 7.6 7.6
3.8
376.44
893
2.57
28500
PL0530
360
-M---
.37
A
71
10.4
2.4 2.2 1.8 1.6 1.5 1.4 1.1
607.20 658.75 796.88 868.19 966.01 1050.24 1270.45
1425 1546 1871 2038 2268 2465 2982
3.67 3.38 2.80 2.57 2.31 2.12 1.75
28500 28500 28500 28500 28500 28500 28500
PL0540 PL0540 PL0540 PL0540 PL0540 PL0540 PL0540
630 710 800 900 10C 11C 12C
-M---M---M---M---M---M---M---
.37 .37 .37 .37 .37 .37 .37
A A A A A A A
71 71 71 71 71 71 71
8.4 8.3 8.2 8.2 8.0 8.0 7.9
22 Benzler Series P Cat .indd 22
21/03/2013 13:20
SERIES P
MOTORISED RATINGS MOTORISED RATINGS
0.93 0.88 0.78
Ratio i
1536.83 1621.69 1840.91
M2 (Nm)
1.5 1.2 1.0 1.0 0.87 0.80 0.68
n2
0.37 kW 4-pole
0.55 kW 4-pole
3608 3807 4321
fm
1.45 0.81 1.03
Fr2 (N) 28500 28500 28500
PL0540 PL0540 PL0540
952.83 1152.62 1371.33 1471.29 1642.66 1779.79 2117.49
2237 2706 3219 3454 3856 4178 4971
4.07 3.37 2.83 1.56 1.94 1.29 1.09
41000 41000 41000 41000 41000 41000 41000
1.0 0.97 0.87 0.80 0.68 0.57
1371.33 1471.29 1642.66 1779.79 2117.49 2519.27
3219 3454 3856 4178 4971 5914
3.50 2.08 2.59 1.72 1.45 1.03
16.8 15.5 13.8 12.8 10.5 9.7 8.7 8.0 6.6 5.5
86.43 93.77 104.77 113.43 137.50 149.49 166.68 180.83 218.75 265.18
301 326 364 394 478 520 580 629 761 922
9.7 8.7 8.0 6.6 5.5 5.0 4.2
149.49 166.68 180.83 218.75 265.18 288.30 348.75
3.3 2.7 2.5 2.2
Unit Designation
Motor Frame
Pt (kW)
14C 16C 18C
-M---M---M---
.37 .37 .37
A A A
71 71 71
7.9 7.9 7.9
PL0840 PL0840 PL0840 PL0840 PL0840 PL0840 PL0840
10C 11C 12C 14C 16C 18C 20C
-M---M---M---M---M---M---M---
.37 .37 .37 .37 .37 .37 .37
A A A A A A A
71 71 71 71 71 71 71
13.6 13.4 13.4 13.4 13.4 13.4 13.4
41000 41000 41000 41000 41000 41000
PL1240 PL1240 PL1240 PL1240 PL1240 PL1240
12C 14C 16C 18C 20C 25C
-M---M---M---M---M---M---
.37 .37 .37 .37 .37 .37
A A A A A A
71 71 71 71 71 71
14.6 14.6 14.6 14.6 14.6 14.6
3.69 3.40 2.47 2.81 2.32 2.14 1.55 1.77 1.46 0.98
13000 13000 13000 13000 13000 13000 13000 13000 13000 13000
PL0130 PL0130 PL0130 PL0130 PL0130 PL0130 PL0130 PL0130 PL0130 PL0130
80. 90. 100 112 125 140 160 180 225 250
-M -M -M -M -M -M -M -M -M -M
---------------------
.55 .55 .55 .55 .55 .55 .55 .55 .55 .55
A A A A A A A A A A
80 80 80 80 80 80 80 80 80 80
6.2 6.1 6.1 6.0 6.0 6.0 5.8 5.8 5.7 5.7
520 580 629 761 922 1003 1213
3.94 2.87 3.26 2.69 1.80 1.16 0.96
13000 13000 13000 13000 13000 13000 13000
PL0230 PL0230 PL0230 PL0230 PL0230 PL0230 PL0230
140 160 180 225 250 280 360
-M---M---M---M---M---M---M---
.55 .55 .55 .55 .55 .55 .55
A A A A A A A
80 80 80 80 80 80 80
6.2 6.0 6.0 5.9 5.9 5.8 5.8
441.10 534.72 581.35 648.21
1518 1840 2001 2231
1.35 1.11 1.02 0.92
13000 13000 13000 13000
PL0240 PL0240 PL0240 PL0240
450 500 560 630
-M---M---M---M---
.55 .55 .55 .55
A A A A
80 80 80 80
4.8 4.8 4.8 4.8
5.8 5.5 4.5 3.8
245.45 261.56 316.41 376.44
866 922 1116 1327
3.34 2.18 1.80 1.13
28500 28500 28500 28500
PL0330 PL0330 PL0330 PL0330
250 280 315 360
-M---M---M---M---
.55 .55 .55 .55
A A A A
80 80 80 80
10.2 10.0 10.0 10.0
3.5 2.9 2.6 2.4 2.2 1.8 1.6 1.5 1.4 1.1
413.19 500.89 544.57 607.20 658.75 796.88 868.19 966.01 1050.24 1270.45
1442 1748 1900 2119 2299 2781 3029 3371 3665 4433
2.36 1.95 1.79 1.60 1.48 1.22 1.12 1.01 0.93 0.77
28500 28500 28500 28500 28500 28500 28500 28500 28500 28500
PL0340 PL0340 PL0340 PL0340 PL0340 PL0340 PL0340 PL0340 PL0340 PL0340
400 500 560 630 710 800 900 10C 11C 12C
-M---M---M---M---M---M---M---M---M---M---
.55 .55 .55 .55 .55 .55 .55 .55 .55 .55
A A A A A A A A A A
80 80 80 80 80 80 80 80 80 80
8.1 8.1 8.1 8.1 8.0 7.8 7.8 7.7 7.7 7.6
4.5 3.8
316.41 376.44
1116 1327
2.77 1.73
28500 28500
PL0530 PL0530
315 360
-M---M---
.55 .55
A A
80 80
10.4 10.4
3.5 2.9 2.6 2.4 2.2 1.8 1.6 1.5 1.4
413.19 500.89 544.57 607.20 658.75 796.88 868.19 966.01 1050.24
1442 1748 1900 2119 2299 2781 3029 3371 3665
3.63 2.99 2.75 2.47 2.28 1.88 1.73 1.55 1.43
28500 28500 28500 28500 28500 28500 28500 28500 28500
PL0540 PL0540 PL0540 PL0540 PL0540 PL0540 PL0540 PL0540 PL0540
400 500 560 630 710 800 900 10C 11C
-M---M---M---M---M---M---M---M---M---
.55 .55 .55 .55 .55 .55 .55 .55 .55
A A A A A A A A A
80 80 80 80 80 80 80 80 80
8.4 8.4 8.4 8.4 8.3 8.2 8.2 8.0 8.0
23 Benzler Series P Cat .indd 23
21/03/2013 13:20
SERIES P
MOTORISED RATINGS MOTORISED RATINGS
1.1 0.93
Ratio i
1270.45 1536.83
M2 (Nm)
4.3
n2
0.55 kW 4-pole
0.75 kW 4-pole
4433 5363
fm
1.18 0.98
Fr2 (N) 28500 28500
PL0540 PL0540
335.90
1184
3.85
41000
1.9 1.8 1.6 1.5 1.2 1.0 0.97
746.46 787.68 894.16 952.83 1152.62 1371.33 1471.29
2605 2749 3120 3325 4022 4785 5134
3.50 3.32 2.92 2.74 2.27 1.90 1.05
1.8 1.6 1.5 1.2 1.0 0.97 0.87 0.80 0.68
787.68 894.16 952.83 1152.62 1371.33 1471.29 1642.66 1779.79 2117.49
2749 3120 3325 4022 4785 5134 5732 6210 7389
20.3 16.8 15.5 13.8 12.8 10.5 9.7 8.7 8.0 6.6
71.30 86.43 93.77 104.77 113.43 137.50 149.49 166.68 180.83 218.75
13.8 12.8 9.7 8.7 8.0 6.6 5.5 5.0
Unit Designation
Motor Frame
Pt (kW)
12C 14C
-M---M---
.55 .55
A A
80 80
7.9 7.9
PL0830
360
-M---
.55
A
80
16.9
41000 41000 41000 41000 41000 41000 41000
PL0840 PL0840 PL0840 PL0840 PL0840 PL0840 PL0840
710 800 900 10C 11C 12C 14C
-M---M---M---M---M---M---M---
.55 .55 .55 .55 .55 .55 .55
A A A A A A A
80 80 80 80 80 80 80
13.8 13.8 13.6 13.6 13.4 13.4 13.4
4.10 3.61 3.39 2.80 2.36 1.40 1.74 1.16 0.97
41000 41000 41000 41000 41000 41000 41000 41000 41000
PL1240 PL1240 PL1240 PL1240 PL1240 PL1240 PL1240 PL1240 PL1240
800 900 10C 11C 12C 14C 16C 18C 20C
-M---M---M---M---M---M---M---M---M---
.55 .55 .55 .55 .55 .55 .55 .55 .55
A A A A A A A A A
80 80 80 80 80 80 80 80 80
15.0 14.8 14.8 14.6 14.6 14.6 14.6 14.6 14.6
338 410 445 497 538 652 709 790 858 1037
3.28 2.71 2.50 1.81 2.06 1.70 1.57 1.14 1.29 1.07
13000 13000 13000 13000 13000 13000 13000 13000 13000 13000
PL0130 PL0130 PL0130 PL0130 PL0130 PL0130 PL0130 PL0130 PL0130 PL0130
71. 80. 90. 100 112 125 140 160 180 225
-M -M -M -M -M -M -M -M -M -M
---------------------
.75 .75 .75 .75 .75 .75 .75 .75 .75 .75
A A A A A A A A A A
80 80 80 80 80 80 80 80 80 80
6.2 6.2 6.1 6.1 6.0 6.0 6.0 5.8 5.8 5.7
104.77 113.43 149.49 166.68 180.83 218.75 265.18 288.30
497 538 709 790 858 1037 1257 1367
3.34 3.81 2.89 2.59 1.94 1.98 1.63 1.21
13000 13000 13000 13000 13000 13000 13000 13000
PL0230 PL0230 PL0230 PL0230 PL0230 PL0230 PL0230 PL0230
100 112 125 140 160 180 225 250
-M---M---M---M---M---M---M---M---
.75 .75 .75 .75 .75 .75 .75 .75
A A A A A A A A
80 80 80 80 80 80 80 80
6.3 6.2 6.2 6.2 6.0 6.0 5.9 5.9
7.0 5.8 5.5 4.5 3.8
204.91 245.45 261.56 316.41 376.44
985 1180 1258 1521 1810
3.45 2.45 1.60 1.32 0.83
28500 28500 28500 28500 28500
PL0330 PL0330 PL0330 PL0330 PL0330
200 250 280 315 360
-M---M---M---M---M---
.75 .75 .75 .75 .75
A A A A A
80 80 80 80 80
10.2 10.2 10.0 10.0 10.0
3.5 2.9 2.6 2.4 2.2
413.19 500.89 544.57 607.20 658.75
1966 2383 2591 2889 3135
1.73 1.43 1.31 1.18 1.08
28500 28500 28500 28500 28500
PL0340 PL0340 PL0340 PL0340 PL0340
400 500 560 630 710
-M---M---M---M---M---
.75 .75 .75 .75 .75
A A A A A
80 80 80 80 80
8.1 8.1 8.1 8.1 8.0
5.8 5.5 4.5 3.8
245.45 261.56 316.41 376.44
1180 1258 1521 1810
3.76 2.46 2.03 1.27
28500 28500 28500 28500
PL0530 PL0530 PL0530 PL0530
250 280 315 360
-M---M---M---M---
.75 .75 .75 .75
A A A A
80 80 80 80
10.6 10.4 10.4 10.4
3.5 2.9 2.6 2.4 2.2 1.8 1.6 1.5 1.4 1.1
413.19 500.89 544.57 607.20 658.75 796.88 868.19 966.01 1050.24 1270.45
1966 2383 2591 2889 3135 3792 4131 4597 4997 6045
2.66 2.19 2.02 1.81 1.67 1.38 1.27 1.14 1.05 0.87
28500 28500 28500 28500 28500 28500 28500 28500 28500 28500
PL0540 PL0540 PL0540 PL0540 PL0540 PL0540 PL0540 PL0540 PL0540 PL0540
400 500 560 630 710 800 900 10C 11C 12C
-M---M---M---M---M---M---M---M---M---M---
.75 .75 .75 .75 .75 .75 .75 .75 .75 .75
A A A A A A A A A A
80 80 80 80 80 80 80 80 80 80
8.4 8.4 8.4 8.4 8.3 8.2 8.2 8.0 8.0 7.9
24 Benzler Series P Cat .indd 24
21/03/2013 13:20
SERIES P
MOTORISED RATINGS MOTORISED RATINGS
5.1 4.3 3.7 3.0 2.8 2.5 2.3 1.9 1.8 1.6 1.5 1.2 1.0 0.97 0.87
Ratio i
282.33 335.90 387.05 469.20 510.11 562.04 617.07 746.46 787.68 894.16 952.83 1152.62 1371.33 1471.29 1642.66
M2 (Nm)
2.3 1.9 1.8 1.6 1.5 1.2 1.0 0.97 0.87 0.80
n2
0.75 kW 4-pole
1.1 kW 4-pole
1358 1615 1842 2233 2427 2674 2936 3552 3748 4255 4534 5485 6525 7001 7816
fm
3.97 2.83 4.95 4.08 3.75 3.41 3.10 2.57 2.43 2.14 2.01 1.66 1.40 0.77 0.96
Fr2 (N) 41000 41000 41000 41000 41000 41000 41000 41000 41000 41000 41000 41000 41000 41000 41000
PL0830 PL0830 PL0840 PL0840 PL0840 PL0840 PL0840 PL0840 PL0840 PL0840 PL0840 PL0840 PL0840 PL0840 PL0840
617.07 746.46 787.68 894.16 952.83 1152.62 1371.33 1471.29 1642.66 1779.79
2936 3552 3748 4255 4534 5485 6525 7001 7816 8469
3.84 3.17 3.01 2.65 2.49 2.06 1.73 1.03 1.28 0.85
41000 41000 41000 41000 41000 41000 41000 41000 41000 41000
37.7 31.2 25.8
38.44 46.50 56.25
270 327 395
2.33 1.92 1.17
24.7 20.3 16.8 15.5 13.8 12.8 10.5 9.7 8.7 8.0
58.81 71.30 86.43 93.77 104.77 113.43 137.50 149.49 166.68 180.83
409 496 601 652 729 789 956 1040 1159 1258
31.2 25.8
46.50 56.25
20.3 16.8 15.5 13.8 12.8 9.7 8.7 8.0 6.6 5.5
Unit Designation
Motor Frame
Pt (kW)
280 360 400 450 500 560 630 710 800 900 10C 11C 12C 14C 16C
-M---M---M---M---M---M---M---M---M---M---M---M---M---M---M---
.75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75
A A A A A A A A A A A A A A A
80 80 80 80 80 80 80 80 80 80 80 80 80 80 80
16.9 16.9 14.2 14.2 14.2 14.2 14.0 13.8 13.8 13.6 13.6 13.4 13.4 13.4 13.4
PL1240 PL1240 PL1240 PL1240 PL1240 PL1240 PL1240 PL1240 PL1240 PL1240
630 710 800 900 10C 11C 12C 14C 16C 18C
-M---M---M---M---M---M---M---M---M---M---
.75 .75 .75 .75 .75 .75 .75 .75 .75 .75
A A A A A A A A A A
80 80 80 80 80 80 80 80 80 80
15.3 15.0 15.0 14.8 14.8 14.6 14.6 14.6 14.6 14.6
13000 13000 13000
PL0120 PL0120 PL0120
40. 45. 56.
-M ---M ---M ---
1.1 1.1 1.1
A A A
90 90 90
8.5 7.8 7.2
2.71 2.24 1.85 1.70 1.24 1.41 1.16 1.07 0.78 0.88
13000 13000 13000 13000 13000 13000 13000 13000 13000 13000
PL0130 PL0130 PL0130 PL0130 PL0130 PL0130 PL0130 PL0130 PL0130 PL0130
63. 71. 80. 90. 100 112 125 140 160 180
-M -M -M -M -M -M -M -M -M -M
---------------------
1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1
A A A A A A A A A A
90 90 90 90 90 90 90 90 90 90
6.2 6.2 6.2 6.1 6.1 6.0 6.0 6.0 5.8 5.8
327 395
3.56 2.17
13000 13000
PL0220 PL0220
45. 56.
-M---M---
1.1 1.1
A A
90 90
8.1 7.4
71.30 86.43 93.77 104.77 113.43 149.49 166.68 180.83 218.75 265.18
496 601 652 729 789 1040 1159 1258 1521 1844
4.13 3.41 3.14 2.28 2.60 1.97 1.77 1.32 1.35 1.11
13000 13000 13000 13000 13000 13000 13000 13000 13000 13000
PL0230 PL0230 PL0230 PL0230 PL0230 PL0230 PL0230 PL0230 PL0230 PL0230
71. 80. 90. 100 112 140 160 180 225 250
-M---M---M---M---M---M---M---M---M---M---
1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1
A A A A A A A A A A
90 90 90 90 90 90 90 90 90 90
6.5 6.5 6.3 6.3 6.2 6.2 6.2 6.0 6.0 5.9
11.1 10.2 9.3 8.4 7.0 5.8 5.5 4.5
128.80 140.03 154.29 169.39 204.91 245.45 261.56 316.41
908 988 1088 1195 1445 1731 1845 2231
3.74 3.44 2.65 2.85 2.35 1.67 1.09 0.90
28500 28500 28500 28500 28500 28500 28500 28500
PL0330 PL0330 PL0330 PL0330 PL0330 PL0330 PL0330 PL0330
125 140 160 180 200 250 280 315
-M---M---M---M---M---M---M---M---
1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1
A A A A A A A A
90 90 90 90 90 90 90 90
10.6 10.6 10.4 10.4 10.2 10.2 10.0 10.0
7.0 5.8 5.5 4.5 3.8
204.91 245.45 261.56 316.41 376.44
1445 1731 1845 2231 2655
3.62 2.57 1.67 1.38 0.87
28500 28500 28500 28500 28500
PL0530 PL0530 PL0530 PL0530 PL0530
200 250 280 315 360
-M---M---M---M---M---
1.1 1.1 1.1 1.1 1.1
A A A A A
90 90 90 90 90
10.6 10.6 10.4 10.4 10.4
25 Benzler Series P Cat .indd 25
21/03/2013 13:20
SERIES P
MOTORISED RATINGS MOTORISED RATINGS
1.1 kW 4-pole
1.5 kW 4-pole
n2
Ratio i
M2 (Nm)
6.0 5.1 4.3
2884 3496 3800 4238 4597 5561 6059
fm
1.81 1.50 1.38 1.23 1.14 0.94 0.86
Fr2 (N) 28500 28500 28500 28500 28500 28500 28500
PL0540 PL0540 PL0540 PL0540 PL0540 PL0540 PL0540
237.30 282.33 335.90
1674 1991 2369
3.22 2.71 1.93
41000 41000 41000
3.7 3.0 2.8 2.5 2.3 1.9 1.8 1.6 1.5 1.2 1.0
387.05 469.20 510.11 562.04 617.07 746.46 787.68 894.16 952.83 1152.62 1371.33
2701 3275 3560 3922 4306 5209 5497 6240 6650 8044 9570
3.37 2.78 2.56 2.32 2.12 1.75 1.66 1.46 1.37 1.13 0.95
4.3
335.90
2369
3.7 3.0 2.8 2.5 2.3 1.9 1.8 1.6 1.5 1.2 1.0 0.97
387.05 469.20 510.11 562.04 617.07 746.46 787.68 894.16 952.83 1152.62 1371.33 1471.29
41.0 37.7 31.2 25.8
3.5 2.9 2.6 2.4 2.2 1.8 1.6
413.19 500.89 544.57 607.20 658.75 796.88 868.19
Unit Designation
Motor Frame
Pt (kW)
400 500 560 630 710 800 900
-M---M---M---M---M---M---M---
1.1 1.1 1.1 1.1 1.1 1.1 1.1
A A A A A A A
90 90 90 90 90 90 90
8.4 8.4 8.4 8.4 8.3 8.2 8.2
PL0830 PL0830 PL0830
250 280 360
-M---M---M---
1.1 1.1 1.1
A A A
90 90 90
16.9 16.9 16.9
41000 41000 41000 41000 41000 41000 41000 41000 41000 41000 41000
PL0840 PL0840 PL0840 PL0840 PL0840 PL0840 PL0840 PL0840 PL0840 PL0840 PL0840
400 450 500 560 630 710 800 900 10C 11C 12C
-M---M---M---M---M---M---M---M---M---M---M---
1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1
A A A A A A A A A A A
90 90 90 90 90 90 90 90 90 90 90
14.2 14.2 14.2 14.2 14.0 13.8 13.8 13.6 13.6 13.4 13.4
2.57
41000
PL1230
360
-M---
1.1
A
90
18.4
2701 3275 3560 3922 4306 5209 5497 6240 6650 8044 9570 10268
4.17 3.44 3.17 2.87 2.62 2.16 2.05 1.81 1.70 1.40 1.18 0.70
41000 41000 41000 41000 41000 41000 41000 41000 41000 41000 41000 41000
PL1240 PL1240 PL1240 PL1240 PL1240 PL1240 PL1240 PL1240 PL1240 PL1240 PL1240 PL1240
400 450 500 560 630 710 800 900 10C 11C 12C 14C
-M---M---M---M---M---M---M---M---M---M---M---M---
1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1
A A A A A A A A A A A A
90 90 90 90 90 90 90 90 90 90 90 90
15.5 15.5 15.5 15.5 15.3 15.0 15.0 14.8 14.8 14.6 14.6 14.6
35.36 38.44 46.50 56.25
339 368 446 539
2.66 1.71 1.41 0.86
13000 13000 13000 13000
PL0120 PL0120 PL0120 PL0120
36. 40. 45. 56.
-M -M -M -M
---------
1.5 1.5 1.5 1.5
A A A A
90 90 90 90
8.0 8.5 7.8 7.2
24.7 20.3 16.8 15.5 13.8 12.8 10.5
58.81 71.30 86.43 93.77 104.77 113.43 137.50
558 676 820 889 994 1076 1304
1.99 1.64 1.35 1.25 0.91 1.03 0.85
13000 13000 13000 13000 13000 13000 13000
PL0130 PL0130 PL0130 PL0130 PL0130 PL0130 PL0130
63. 71. 80. 90. 100 112 125
-M -M -M -M -M -M -M
---------------
1.5 1.5 1.5 1.5 1.5 1.5 1.5
A A A A A A A
90 90 90 90 90 90 90
6.2 6.2 6.2 6.1 6.1 6.0 6.0
37.7 31.2 25.8
38.44 46.50 56.25
368 446 539
3.15 2.61 1.59
13000 13000 13000
PL0220 PL0220 PL0220
40. 45. 56.
-M---M---M---
1.5 1.5 1.5
A A A
90 90 90
8.8 8.1 7.4
24.7 20.3 16.8 15.5 13.8 12.8 9.7 8.7 8.0 6.6
58.81 71.30 86.43 93.77 104.77 113.43 149.49 166.68 180.83 218.75
558 676 820 889 994 1076 1418 1581 1715 2075
3.68 3.03 2.50 2.31 1.67 1.91 1.45 1.30 0.97 0.99
13000 13000 13000 13000 13000 13000 13000 13000 13000 13000
PL0230 PL0230 PL0230 PL0230 PL0230 PL0230 PL0230 PL0230 PL0230 PL0230
63. 71. 80. 90. 100 112 140 160 180 225
-M---M---M---M---M---M---M---M---M---M---
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
A A A A A A A A A A
90 90 90 90 90 90 90 90 90 90
6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5
16.3 14.7 13.4 11.1 10.2
87.83 96.98 106.48 128.80 140.03
845 933 1024 1239 1347
4.03 3.10 3.32 2.74 2.52
28500 28500 28500 28500 28500
PL0330 PL0330 PL0330 PL0330 PL0330
90. 100 112 125 140
-M---M---M---M---M---
1.5 1.5 1.5 1.5 1.5
A A A A A
90 90 90 90 90
10.9 10.9 10.6 10.6 10.6
26 Benzler Series P Cat .indd 26
21/03/2013 13:20
SERIES P
MOTORISED RATINGS MOTORISED RATINGS
1.5 kW 4-pole
2.2 kW 4-pole
n2
Ratio i
M2 (Nm)
9.3 8.4 7.0 5.8 5.5 4.5
1484 1629 1971 2360 2515
fm
1.95 2.09 1.73 1.22 0.80
Fr2 (N) 28500 28500 28500 28500 28500
PL0330 PL0330 PL0330 PL0330 PL0330
154.29 169.39 204.91 245.45 261.56 316.41
1484 1629 1971 2360 2515 3043
2.99 3.21 2.65 1.88 1.23 1.02
28500 28500 28500 28500 28500 28500
3.5 2.9 2.6 2.4 2.2
413.19 500.89 544.57 607.20 658.75
3932 4767 5182 5779 6269
1.33 1.10 1.01 0.91 0.83
6.53 6.03 5.06 4.26
219.02 237.30 282.33 335.90
2106 2282 2715 3230
3.69 3.05 2.80 2.54 2.32 1.92 1.82 1.60 1.50
387.05 469.20 510.11 562.04 617.07 746.46 787.68 894.16 952.83
5.06 4.26
9.3 8.4 7.0 5.8 5.5
154.29 169.39 204.91 245.45 261.56
Unit Designation
Motor Frame
Pt (kW)
160 180 200 250 280
-M---M---M---M---M---
1.5 1.5 1.5 1.5 1.5
A A A A A
90 90 90 90 90
10.4 10.4 10.2 10.2 10.0
PL0530 PL0530 PL0530 PL0530 PL0530 PL0530
160 180 200 250 280 315
-M---M---M---M---M---M---
1.5 1.5 1.5 1.5 1.5 1.5
A A A A A A
90 90 90 90 90 90
10.8 10.8 10.6 10.6 10.4 10.4
28500 28500 28500 28500 28500
PL0540 PL0540 PL0540 PL0540 PL0540
400 500 560 630 710
-M---M---M---M---M---
1.5 1.5 1.5 1.5 1.5
A A A A A
90 90 90 90 90
8.4 8.4 8.4 8.4 8.3
3.56 2.36 1.99 1.41
41000 41000 41000 41000
PL0830 PL0830 PL0830 PL0830
225 250 280 360
-M---M---M---M---
1.5 1.5 1.5 1.5
A A A A
90 90 90 90
17.3 16.9 16.9 16.9
3683 4465 4855 5349 5872 7104 7496 8509 9068
2.47 2.04 1.88 1.70 1.55 1.28 1.22 1.07 1.00
41000 41000 41000 41000 41000 41000 41000 41000 41000
PL0840 PL0840 PL0840 PL0840 PL0840 PL0840 PL0840 PL0840 PL0840
400 450 500 560 630 710 800 900 10C
-M---M---M---M---M---M---M---M---M---
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
A A A A A A A A A
90 90 90 90 90 90 90 90 90
14.2 14.2 14.2 14.2 14.0 13.8 13.8 13.6 13.6
282.33 335.90
2715 3230
2.65 1.88
41000 41000
PL1230 PL1230
280 360
-M---M---
1.5 1.5
A A
90 90
18.4 18.4
3.69 3.05 2.80 2.54 2.32 1.92 1.82 1.60 1.50 1.24 1.04
387.05 469.20 510.11 562.04 617.07 746.46 787.68 894.16 952.83 1152.62 1371.33
3683 4465 4855 5349 5872 7104 7496 8509 9068 10969 13050
3.06 2.53 2.32 2.11 1.92 1.59 1.50 1.33 1.24 1.03 0.86
41000 41000 41000 41000 41000 41000 41000 41000 41000 41000 41000
PL1240 PL1240 PL1240 PL1240 PL1240 PL1240 PL1240 PL1240 PL1240 PL1240 PL1240
400 450 500 560 630 710 800 900 10C 11C 12C
-M---M---M---M---M---M---M---M---M---M---M---
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
A A A A A A A A A A A
90 90 90 90 90 90 90 90 90 90 90
15.5 15.5 15.5 15.5 15.3 15.0 15.0 14.8 14.8 14.6 14.6
65.2 60.1 49.7 41.0 37.7 31.2
22.22 24.11 29.17 35.36 38.44 46.50
312 339 410 497 540 654
2.88 3.28 2.71 1.81 1.16 0.96
11765 12763 13000 13000 13000 13000
PL0120 PL0120 PL0120 PL0120 PL0120 PL0120
22. 25. 28. 36. 40. 45.
-M -M -M -M -M -M
-------------
2.2 2.2 2.2 2.2 2.2 2.2
A A A A A A
100 100 100 100 100 100
8.9 8.7 8.0 8.0 8.5 7.8
24.7 20.3 16.8
58.81 71.30 86.43
818 992 1202
1.36 1.12 0.92
13000 13000 13000
PL0130 PL0130 PL0130
63. 71. 80.
-M ---M ---M ---
2.2 2.2 2.2
A A A
100 100 100
6.2 6.2 6.2
41.0 37.7 31.2 25.8
35.36 38.44 46.50 56.25
497 540 654 791
3.34 2.15 1.78 1.08
13000 13000 13000 13000
PL0220 PL0220 PL0220 PL0220
36. 40. 45. 56.
-M---M---M---M---
2.2 2.2 2.2 2.2
A A A A
100 100 100 100
8.2 8.8 8.1 7.4
24.7 20.3 16.8 15.5 13.8 12.8 9.7
58.81 71.30 86.43 93.77 104.77 113.43 149.49
818 992 1202 1304 1457 1578 2079
2.51 2.07 1.71 1.57 1.14 1.30 0.99
13000 13000 13000 13000 13000 13000 13000
PL0230 PL0230 PL0230 PL0230 PL0230 PL0230 PL0230
63. 71. 80. 90. 100 112 140
-M---M---M---M---M---M---M---
2.2 2.2 2.2 2.2 2.2 2.2 2.2
A A A A A A A
100 100 100 100 100 100 100
6.5 6.5 6.5 6.3 6.3 6.2 6.2
27 Benzler Series P Cat .indd 27
21/03/2013 13:20
SERIES P
MOTORISED RATINGS MOTORISED RATINGS
2.2 kW 4-pole
3.0 kW 4-pole
n2
Ratio i
M2 (Nm)
34.4 28.9
2319
fm
0.88
Fr2 (N) 13000
PL0230
42.19 50.19
593 705
3.39 2.12
28500 28500
26.3 21.7 17.9 16.5 15.0 13.6 11.3 10.4 9.4 8.6 7.1 5.9
55.09 66.79 80.96 87.83 96.98 106.48 128.80 140.03 154.29 169.39 204.91 245.45
766 929 1126 1222 1349 1481 1792 1948 2146 2356 2850 3414
4.44 3.66 3.02 2.78 2.14 2.30 1.90 1.75 1.35 1.44 1.19 0.85
13.6 11.3 10.4 9.4 8.6 7.1 5.9 5.5
106.48 128.80 140.03 154.29 169.39 204.91 245.45 261.56
1481 1792 1948 2146 2356 2850 3414 3638
10.2 9.4 7.9 6.6 6.1 5.1
142.81 153.68 182.84 219.02 237.30 282.33
3.7 3.1 2.8 2.6 2.3 1.9
8.7
166.68
Unit Designation
Motor Frame
Pt (kW)
160
-M---
2.2
A
100
6.2
PL0320 PL0320
45. 50.
-M---M---
2.2 2.2
A A
100 100
13.8 12.7
28500 28500 28500 28500 28500 28500 28500 28500 28500 28500 28500 28500
PL0330 PL0330 PL0330 PL0330 PL0330 PL0330 PL0330 PL0330 PL0330 PL0330 PL0330 PL0330
56. 71. 80. 90. 100 112 125 140 160 180 200 250
-M---M---M---M---M---M---M---M---M---M---M---M---
2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2
A A A A A A A A A A A A
100 100 100 100 100 100 100 100 100 100 100 100
11.1 11.1 11.1 10.9 10.9 10.6 10.6 10.6 10.4 10.4 10.2 10.2
3.53 2.92 2.69 2.07 2.22 1.84 1.30 0.85
28500 28500 28500 28500 28500 28500 28500 28500
PL0530 PL0530 PL0530 PL0530 PL0530 PL0530 PL0530 PL0530
112 125 140 160 180 200 250 280
-M---M---M---M---M---M---M---M---
2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2
A A A A A A A A
100 100 100 100 100 100 100 100
11.1 11.1 11.1 10.8 10.8 10.6 10.6 10.4
1986 2138 2543 3047 3301 3927
3.77 4.26 3.58 2.46 1.63 1.37
41000 41000 41000 41000 41000 41000
PL0830 PL0830 PL0830 PL0830 PL0830 PL0830
140 160 180 225 250 280
-M---M---M---M---M---M---
2.2 2.2 2.2 2.2 2.2 2.2
A A A A A A
100 100 100 100 100 100
17.6 17.6 17.3 17.3 16.9 16.9
387.05 469.20 510.11 562.04 617.07 746.46
5328 6459 7022 7737 8494 10275
1.71 1.41 1.30 1.18 1.07 0.89
41000 41000 41000 41000 41000 41000
PL0840 PL0840 PL0840 PL0840 PL0840 PL0840
400 450 500 560 630 710
-M---M---M---M---M---M---
2.2 2.2 2.2 2.2 2.2 2.2
A A A A A A
100 100 100 100 100 100
14.2 14.2 14.2 14.2 14.0 13.8
6.6 6.1 5.1 4.3
219.02 237.30 282.33 335.90
3047 3301 3927 4672
3.28 2.18 1.83 1.30
41000 41000 41000 41000
PL1230 PL1230 PL1230 PL1230
225 250 280 360
-M---M---M---M---
2.2 2.2 2.2 2.2
A A A A
100 100 100 100
18.8 18.4 18.4 18.4
3.7 3.1 2.8 2.6 2.3 1.9 1.8 1.6 1.5
387.05 469.20 510.11 562.04 617.07 746.46 787.68 894.16 952.83
5328 6459 7022 7737 8494 10275 10843 12308 13116
2.12 1.75 1.61 1.46 1.33 1.10 1.04 0.92 0.86
41000 41000 41000 41000 41000 41000 41000 41000 41000
PL1240 PL1240 PL1240 PL1240 PL1240 PL1240 PL1240 PL1240 PL1240
400 450 500 560 630 710 800 900 10C
-M---M---M---M---M---M---M---M---M---
2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2
A A A A A A A A A
100 100 100 100 100 100 100 100 100
15.5 15.5 15.5 15.5 15.3 15.0 15.0 14.8 14.8
79.1 65.2 60.1 49.7 41.0 37.7
18.33 22.22 24.11 29.17 35.36 38.44
351 426 462 559 678 737
3.16 2.11 2.40 1.99 1.33 0.85
9705 11765 12763 13000 13000 13000
PL0120 PL0120 PL0120 PL0120 PL0120 PL0120
18. 22. 25. 28. 36. 40.
-M -M -M -M -M -M
-------------
3.0 3.0 3.0 3.0 3.0 3.0
A A A A A A
100 100 100 100 100 100
8.9 8.9 8.7 8.0 8.0 8.5
49.7 41.0 37.7 31.2 25.8
29.17 35.36 38.44 46.50 56.25
559 678 737 891 1078
3.67 2.45 1.58 1.30 0.79
13000 13000 13000 13000 13000
PL0220 PL0220 PL0220 PL0220 PL0220
28. 36. 40. 45. 56.
-M---M---M---M---M---
3.0 3.0 3.0 3.0 3.0
A A A A A
100 100 100 100 100
9.0 8.2 8.2 8.8 8.1
24.7 20.3 16.8
58.81 71.30 86.43
1116 1352 1639
1.84 1.52 1.25
13000 13000 13000
PL0230 PL0230 PL0230
63. 71. 80.
-M---M---M---
3.0 3.0 3.0
A A A
100 100 100
6.5 6.5 6.5
28 Benzler Series P Cat .indd 28
21/03/2013 13:20
SERIES P
MOTORISED RATINGS MOTORISED RATINGS
3.0 kW 4-pole
4.0 kW 4-pole
n2
Ratio i
M2 (Nm)
41.6 34.4 28.9
1779 1987 2151
fm
1.15 0.84 0.95
Fr2 (N) 13000 13000 13000
PL0230 PL0230 PL0230
34.88 42.19 50.19
668 809 962
3.00 2.48 1.55
28500 28500 28500
26.3 21.7 17.9 16.5 15.0 13.6 11.3 10.4 9.4 8.6 7.1
55.09 66.79 80.96 87.83 96.98 106.48 128.80 140.03 154.29 169.39 204.91
1045 1267 1536 1666 1840 2020 2443 2656 2927 3213 3887
3.25 2.68 2.21 2.04 1.57 1.68 1.39 1.28 0.99 1.06 0.87
17.9 16.5 15.0 13.6 11.3 10.4 9.4 8.6 7.1 5.9
80.96 87.83 96.98 106.48 128.80 140.03 154.29 169.39 204.91 245.45
1536 1666 1840 2020 2443 2656 2927 3213 3887 4656
12.2 11.4 10.2 9.4 7.9 6.6 6.1 5.1
119.22 127.04 142.81 153.68 182.84 219.02 237.30 282.33
9.4 7.9 6.6 6.1 5.1 4.3
15.5 13.8 12.8
93.77 104.77 113.43
Unit Designation
Motor Frame
Pt (kW)
90. 100 112
-M---M---M---
3.0 3.0 3.0
A A A
100 100 100
6.5 6.5 6.5
PL0320 PL0320 PL0320
36. 45. 50.
-M---M---M---
3.0 3.0 3.0
A A A
100 100 100
15.1 13.8 12.7
28500 28500 28500 28500 28500 28500 28500 28500 28500 28500 28500
PL0330 PL0330 PL0330 PL0330 PL0330 PL0330 PL0330 PL0330 PL0330 PL0330 PL0330
56. 71. 80. 90. 100 112 125 140 160 180 200
-M---M---M---M---M---M---M---M---M---M---M---
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
A A A A A A A A A A A
100 100 100 100 100 100 100 100 100 100 100
11.1 11.1 11.1 10.9 10.9 10.6 10.6 10.6 10.4 10.4 10.2
3.41 3.14 2.41 2.59 2.14 1.97 1.52 1.63 1.35 0.95
28500 28500 28500 28500 28500 28500 28500 28500 28500 28500
PL0530 PL0530 PL0530 PL0530 PL0530 PL0530 PL0530 PL0530 PL0530 PL0530
80. 90. 100 112 125 140 160 180 200 250
-M---M---M---M---M---M---M---M---M---M---
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
A A A A A A A A A A
100 100 100 100 100 100 100 100 100 100
11.6 11.4 11.3 11.1 11.1 11.1 10.8 10.8 10.6 10.6
2261 2410 2709 2915 3468 4154 4501 5355
4.03 3.78 2.77 3.13 2.63 1.80 1.20 1.01
41000 41000 41000 41000 41000 41000 41000 41000
PL0830 PL0830 PL0830 PL0830 PL0830 PL0830 PL0830 PL0830
112 125 140 160 180 225 250 280
-M---M---M---M---M---M---M---M---
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
A A A A A A A A
100 100 100 100 100 100 100 100
18.0 18.0 17.6 17.6 17.3 17.3 16.9 16.9
153.68 182.84 219.02 237.30 282.33 335.90
2915 3468 4154 4501 5355 6371
3.87 3.25 2.41 1.60 1.34 0.95
41000 41000 41000 41000 41000 41000
PL1230 PL1230 PL1230 PL1230 PL1230 PL1230
160 180 225 250 280 360
-M---M---M---M---M---M---
3.0 3.0 3.0 3.0 3.0 3.0
A A A A A A
100 100 100 100 100 100
19.2 18.8 18.8 18.4 18.4 18.4
3.7 3.1 2.8 2.6 2.3 1.9
387.05 469.20 510.11 562.04 617.07 746.46
7265 8807 9575 10550 11583 14012
1.55 1.28 1.18 1.07 0.97 0.80
41000 41000 41000 41000 41000 41000
PL1240 PL1240 PL1240 PL1240 PL1240 PL1240
400 450 500 560 630 710
-M---M---M---M---M---M---
3.0 3.0 3.0 3.0 3.0 3.0
A A A A A A
100 100 100 100 100 100
15.5 15.5 15.5 15.5 15.3 15.0
95.9 79.1 65.2 60.1 49.7 41.0
15.12 18.33 22.22 24.11 29.17 35.36
386 468 568 616 745 904
2.48 2.17 1.48 1.69 1.41 1.00
8006 9705 11765 12763 13000 13000
PL0120 PL0120 PL0120 PL0120 PL0120 PL0120
16. 18. 22. 25. 28. 36.
-M -M -M -M -M -M
-------------
4.0 4.0 4.0 4.0 4.0 4.0
A A A A A A
112 112 112 112 112 112
8.9 8.9 8.9 8.9 8.9 8.7
79.1 65.2 60.1 49.7 41.0 37.7 31.2
18.33 22.22 24.11 29.17 35.36 38.44 46.50
468 568 616 745 904 982 1188
3.71 2.73 3.07 2.61 1.84 1.18 0.98
9705 11765 12763 13000 13000 13000 13000
PL0220 PL0220 PL0220 PL0220 PL0220 PL0220 PL0220
18. 22. 25. 28. 36. 40. 45.
-M---M---M---M---M---M---M---
4.0 4.0 4.0 4.0 4.0 4.0 4.0
A A A A A A A
112 112 112 112 112 112 112
9.3 9.3 9.0 8.2 8.2 8.8 8.1
24.7 20.3 16.8
58.81 71.30 86.43
1487 1803 2186
1.38 1.14 0.94
13000 13000 13000
PL0230 PL0230 PL0230
63. 71. 80.
-M---M---M---
4.0 4.0 4.0
A A A
112 112 112
6.5 6.5 6.5
29 Benzler Series P Cat .indd 29
21/03/2013 13:20
SERIES P
MOTORISED RATINGS MOTORISED RATINGS
4.0 kW 4-pole
5.5 kW 4-pole
n2
Ratio i
M2 (Nm)
44.3 41.6 34.4 28.9
2371
fm
0.86
Fr2 (N) 13000
PL0230
32.73 34.88 42.19 50.19
836 891 1078 1283
3.45 2.25 1.86 1.16
28500 28500 28500 28500
26.3 21.7 17.9 16.5 15.0 13.6 11.3 10.4
55.09 66.79 80.96 87.83 96.98 106.48 128.80 140.03
1393 1689 2048 2221 2453 2693 3258 3542
2.44 2.01 1.66 1.53 1.18 1.26 1.04 0.96
26.3 21.7 17.9 16.5 15.0 13.6 11.3 10.4 9.4 8.6 7.1
55.09 66.79 80.96 87.83 96.98 106.48 128.80 140.03 154.29 169.39 204.91
1393 1689 2048 2221 2453 2693 3258 3542 3902 4284 5182
16.2 14.7 12.2 11.4 10.2 9.4 7.9 6.6 6.1
89.77 98.56 119.22 127.04 142.81 153.68 182.84 219.02 237.30
12.2 11.4 10.2 9.4 7.9 6.6 6.1 5.1
15.5
93.77
Unit Designation
Motor Frame
Pt (kW)
90.
-M---
4.0
A
112
6.3
PL0320 PL0320 PL0320 PL0320
32. 36. 45. 50.
-M---M---M---M---
4.0 4.0 4.0 4.0
A A A A
112 112 112 112
14.1 15.1 13.8 12.7
28500 28500 28500 28500 28500 28500 28500 28500
PL0330 PL0330 PL0330 PL0330 PL0330 PL0330 PL0330 PL0330
56. 71. 80. 90. 100 112 125 140
-M---M---M---M---M---M---M---M---
4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0
A A A A A A A A
112 112 112 112 112 112 112 112
11.1 11.1 11.1 10.9 10.9 10.6 10.6 10.6
3.75 3.10 2.55 2.35 1.81 1.94 1.61 1.48 1.14 1.22 1.01
28500 28500 28500 28500 28500 28500 28500 28500 28500 28500 28500
PL0530 PL0530 PL0530 PL0530 PL0530 PL0530 PL0530 PL0530 PL0530 PL0530 PL0530
56. 71. 80. 90. 100 112 125 140 160 180 200
-M---M---M---M---M---M---M---M---M---M---M---
4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0
A A A A A A A A A A A
112 112 112 112 112 112 112 112 112 112 112
11.6 11.6 11.6 11.6 11.6 11.6 11.6 11.6 11.6 11.6 11.6
2270 2493 3015 3213 3612 3887 4624 5539 6002
3.30 3.66 3.02 2.84 2.07 2.34 1.97 1.35 0.90
41000 41000 41000 41000 41000 41000 41000 41000 41000
PL0830 PL0830 PL0830 PL0830 PL0830 PL0830 PL0830 PL0830 PL0830
90. 100 112 125 140 160 180 225 250
-M---M---M---M---M---M---M---M---M---
4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0
A A A A A A A A A
112 112 112 112 112 112 112 112 112
18.4 18.0 18.0 18.0 17.6 17.6 17.3 17.3 16.9
119.22 127.04 142.81 153.68 182.84 219.02 237.30 282.33
3015 3213 3612 3887 4624 5539 6002 7140
3.74 3.51 2.77 2.90 2.44 1.80 1.20 1.01
41000 41000 41000 41000 41000 41000 41000 41000
PL1230 PL1230 PL1230 PL1230 PL1230 PL1230 PL1230 PL1230
112 125 140 160 180 225 250 280
-M---M---M---M---M---M---M---M---
4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0
A A A A A A A A
112 112 112 112 112 112 112 112
19.6 19.6 19.2 19.2 18.8 18.8 18.4 18.4
3.7 3.1 2.8
387.05 469.20 510.11
9687 11743 12767
1.16 0.96 0.88
41000 41000 41000
PL1240 PL1240 PL1240
400 450 500
-M---M---M---
4.0 4.0 4.0
A A A
112 112 112
15.5 15.5 15.5
233.9 193.3
6.20 7.50
218 264
2.48 1.53
3282 3970
PL0110 PL0110
6.3 7.1
-M ---M ---
5.5 5.5
A A
132 132
14.7 12.5
95.9 79.1 65.2 60.1 49.7 41.0
15.12 18.33 22.22 24.11 29.17 35.36
531 644 781 847 1025 1242
1.80 1.58 1.07 1.23 1.03 0.70
8006 9705 11765 12763 13000 13000
PL0120 PL0120 PL0120 PL0120 PL0120 PL0120
16. 18. 22. 25. 28. 36.
-M -M -M -M -M -M
-------------
5.5 5.5 5.5 5.5 5.5 5.5
A A A A A A
132 132 132 132 132 132
8.9 8.9 8.9 8.7 8.0 8.0
95.9 79.1 65.2 60.1 49.7 41.0 37.7
15.12 18.33 22.22 24.11 29.17 35.36 38.44
531 644 781 847 1025 1242 1351
3.09 2.70 1.98 2.23 1.90 1.28 0.83
8006 9705 11765 12763 13000 13000 13000
PL0220 PL0220 PL0220 PL0220 PL0220 PL0220 PL0220
16. 18. 22. 25. 28. 36. 40.
-M---M---M---M---M---M---M---
5.5 5.5 5.5 5.5 5.5 5.5 5.5
A A A A A A A
132 132 132 132 132 132 132
9.3 9.3 9.3 9.0 8.2 8.2 8.8
70.5 64.2 53.1
20.57 22.59 27.32
723 794 960
3.71 3.65 3.19
28500 28500 28500
PL0320 PL0320 PL0320
20. 22. 25.
-M---M---M---
5.5 5.5 5.5
A A A
132 132 132
15.9 15.5 14.1
30 Benzler Series P Cat .indd 30
21/03/2013 13:20
SERIES P
MOTORISED RATINGS MOTORISED RATINGS
5.5 kW 4-pole
7.5 kW 4-pole
n2
Ratio i
M2 (Nm)
26.3 21.7 17.9 16.5
1150 1225 1482 1764
fm
2.40 1.57 1.32 0.83
Fr2 (N) 28500 28500 28500 28500
PL0320 PL0320 PL0320 PL0320
55.09 66.79 80.96 87.83
1916 2322 2815 3054
1.75 1.46 1.22 1.13
28500 28500 28500 28500
44.3 41.6 34.4 28.9
32.73 34.88 42.19 50.19
1150 1225 1482 1764
3.69 2.42 2.02 1.28
26.3 21.7 17.9 16.5 15.0 13.6 11.3 10.4 9.4 8.6
55.09 66.79 80.96 87.83 96.98 106.48 128.80 140.03 154.29 169.39
1916 2322 2815 3054 3372 3703 4479 4870 5365 5891
38.5 32.4
37.64 44.79
23.2 19.3 17.6 16.2 14.7 12.2 11.4 10.2 9.4 7.9 6.6
44.3 41.6 34.4 28.9
32.73 34.88 42.19 50.19
Unit Designation
Motor Frame
Pt (kW)
32. 36. 45. 50.
-M---M---M---M---
5.5 5.5 5.5 5.5
A A A A
132 132 132 132
14.1 15.1 13.8 12.7
PL0330 PL0330 PL0330 PL0330
56. 71. 80. 90.
-M---M---M---M---
5.5 5.5 5.5 5.5
A A A A
132 132 132 132
11.1 11.1 11.1 10.9
28500 28500 28500 28500
PL0520 PL0520 PL0520 PL0520
32. 36. 45. 50.
-M---M---M---M---
5.5 5.5 5.5 5.5
A A A A
132 132 132 132
14.7 15.7 14.4 13.3
2.70 2.25 1.88 1.74 1.35 1.45 1.22 1.12 0.87 0.94
28500 28500 28500 28500 28500 28500 28500 28500 28500 28500
PL0530 PL0530 PL0530 PL0530 PL0530 PL0530 PL0530 PL0530 PL0530 PL0530
56. 71. 80. 90. 100 112 125 140 160 180
-M---M---M---M---M---M---M---M---M---M---
5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5
A A A A A A A A A A
132 132 132 132 132 132 132 132 132 132
11.6 11.6 11.6 11.4 11.3 11.1 11.1 11.1 10.8 10.8
1323 1574
3.93 2.83
41000 41000
PL0820 PL0820
36 45.
-M---M---
5.5 5.5
A A
132 132
24.0 22.1
62.56 74.94 82.28 89.77 98.56 119.22 127.04 142.81 153.68 182.84 219.02
2176 2606 2861 3122 3427 4146 4418 4966 5344 6358 7616
4.01 3.46 3.22 2.44 2.72 2.28 2.15 1.58 1.80 1.53 1.06
41000 41000 41000 41000 41000 41000 41000 41000 41000 41000 41000
PL0830 PL0830 PL0830 PL0830 PL0830 PL0830 PL0830 PL0830 PL0830 PL0830 PL0830
63. 71. 80. 90. 100 112 125 140 160 180 225
-M---M---M---M---M---M---M---M---M---M---M---
5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5
A A A A A A A A A A A
132 132 132 132 132 132 132 132 132 132 132
18.8 18.8 18.5 18.4 18.0 18.0 18.0 17.6 17.6 17.3 17.3
17.6 16.2 14.7 12.2 11.4 10.2 9.4 7.9 6.6 6.1
82.28 89.77 98.56 119.22 127.04 142.81 153.68 182.84 219.02 237.30
2861 3122 3427 4146 4418 4966 5344 6358 7616 8252
3.99 3.26 3.37 2.82 2.66 2.11 2.22 1.89 1.41 0.94
41000 41000 41000 41000 41000 41000 41000 41000 41000 41000
PL1230 PL1230 PL1230 PL1230 PL1230 PL1230 PL1230 PL1230 PL1230 PL1230
80. 90. 100 112 125 140 160 180 225 250
-M---M---M---M---M---M---M---M---M---M---
5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5
A A A A A A A A A A
132 132 132 132 132 132 132 132 132 132
20.2 20.0 19.6 19.6 19.6 19.2 19.2 18.8 18.8 18.4
372.9 307.6 233.9 193.3
3.89 4.71 6.20 7.50
188 228 300 363
3.39 2.89 1.80 1.11
2059 2496 3282 3970
PL0110 PL0110 PL0110 PL0110
3.6 4.5 6.3 7.1
-M -M -M -M
---------
7.5 7.5 7.5 7.5
A A A A
132 132 132 132
15.4 15.4 14.7 12.5
95.9 79.1 65.2 60.1 49.7
15.12 18.33 22.22 24.11 29.17
725 878 1065 1155 1398
1.32 1.16 0.79 0.90 0.75
8006 9705 11765 12763 13000
PL0120 PL0120 PL0120 PL0120 PL0120
16. 18. 22. 25. 28.
-M -M -M -M -M
-----------
7.5 7.5 7.5 7.5 7.5
A A A A A
132 132 132 132 132
8.9 8.9 8.9 8.7 8.0
372.9 307.6 233.9 193.3
3.89 4.71 6.20 7.50
188 228 300 363
5.80 4.95 3.33 2.05
2059 2496 3282 3970
PL0210 PL0210 PL0210 PL0210
3.6 4.5 6.3 7.1
-M---M---M---M---
7.5 7.5 7.5 7.5
A A A A
132 132 132 132
16.0 16.0 15.3 13.0
95.9 79.1 65.2 60.1
15.12 18.33 22.22 24.11
725 878 1065 1155
2.27 1.98 1.45 1.64
8006 9705 11765 12763
PL0220 PL0220 PL0220 PL0220
16. 18. 22. 25.
-M---M---M---M---
7.5 7.5 7.5 7.5
A A A A
132 132 132 132
9.3 9.3 9.3 9.0
31 Benzler Series P Cat .indd 31
21/03/2013 13:20
SERIES P
MOTORISED RATINGS MOTORISED RATINGS
7.5 kW 4-pole
11 kW 4-pole
n2
Ratio i
M2 (Nm)
102.4 84.4 70.5 64.2 53.1 44.3 41.6 34.4
1398 1694
fm
1.39 0.94
Fr2 (N) 13000 13000
PL0220 PL0220
14.17 17.17 20.57 22.59 27.32 32.73 34.88 42.19
679 823 986 1082 1309 1568 1671 2021
3.71 3.24 2.72 2.68 2.34 1.76 1.15 0.96
20930 25373 28500 28500 28500 28500 28500 28500
70.5 64.2 53.1 44.3 41.6 34.4 28.9
20.57 22.59 27.32 32.73 34.88 42.19 50.19
986 1082 1309 1568 1671 2021 2405
3.94 3.85 3.37 2.71 1.77 1.48 0.94
26.3 21.7 17.9 16.5 15.0 13.6 11.3 10.4
55.09 66.79 80.96 87.83 96.98 106.48 128.80 140.03
2613 3167 3839 4165 4599 5049 6108 6640
45.8 38.5 32.4
31.64 37.64 44.79
28.1 23.2 19.3 17.6 16.2 14.7 12.2 11.4 10.2 9.4 7.9
49.7 41.0
29.17 35.36
Unit Designation
Motor Frame
Pt (kW)
28. 36.
-M---M---
7.5 7.5
A A
132 132
8.2 8.2
PL0320 PL0320 PL0320 PL0320 PL0320 PL0320 PL0320 PL0320
14. 16. 20. 22. 25. 32. 36. 45.
-M---M---M---M---M---M---M---M---
7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5
A A A A A A A A
132 132 132 132 132 132 132 132
15.9 15.9 15.9 15.5 14.1 14.1 15.1 13.8
28500 28500 28500 28500 28500 28500 28500
PL0520 PL0520 PL0520 PL0520 PL0520 PL0520 PL0520
20. 22. 25. 32. 36. 45. 50.
-M---M---M---M---M---M---M---
7.5 7.5 7.5 7.5 7.5 7.5 7.5
A A A A A A A
132 132 132 132 132 132 132
16.6 16.1 14.7 14.7 15.7 14.4 13.3
1.98 1.65 1.38 1.28 0.99 1.07 0.89 0.82
28500 28500 28500 28500 28500 28500 28500 28500
PL0530 PL0530 PL0530 PL0530 PL0530 PL0530 PL0530 PL0530
56. 71. 80. 90. 100 112 125 140
-M---M---M---M---M---M---M---M---
7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5
A A A A A A A A
132 132 132 132 132 132 132 132
11.6 11.6 11.6 11.4 11.3 11.1 11.1 11.1
1516 1804 2146
3.39 2.88 2.07
41000 41000 41000
PL0820 PL0820 PL0820
32. 36 45.
-M---M---M---
7.5 7.5 7.5
A A A
132 132 132
26.2 24.0 22.1
51.61 62.56 74.94 82.28 89.77 98.56 119.22 127.04 142.81 153.68 182.84
2447 2967 3554 3902 4257 4674 5654 6025 6772 7288 8671
3.36 2.94 2.53 2.36 1.79 2.00 1.67 1.57 1.16 1.32 1.12
41000 41000 41000 41000 41000 41000 41000 41000 41000 41000 41000
PL0830 PL0830 PL0830 PL0830 PL0830 PL0830 PL0830 PL0830 PL0830 PL0830 PL0830
56. 63. 71. 80. 90. 100 112 125 140 160 180
-M---M---M---M---M---M---M---M---M---M---M---
7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5
A A A A A A A A A A A
132 132 132 132 132 132 132 132 132 132 132
18.8 18.8 18.8 18.5 18.4 18.0 18.0 18.0 17.6 17.6 17.3
32.4
44.79
2146
2.76
41000
PL1220
45.
-M---
7.5
A
132
23.4
28.1 23.2 19.3 17.6 16.2 14.7 12.2 11.4 10.2 9.4 7.9 6.6
51.61 62.56 74.94 82.28 89.77 98.56 119.22 127.04 142.81 153.68 182.84 219.02
2447 2967 3554 3902 4257 4674 5654 6025 6772 7288 8671 10386
4.16 3.64 3.19 2.93 2.39 2.47 2.07 1.95 1.55 1.63 1.38 1.04
41000 41000 41000 41000 41000 41000 41000 41000 41000 41000 41000 41000
PL1230 PL1230 PL1230 PL1230 PL1230 PL1230 PL1230 PL1230 PL1230 PL1230 PL1230 PL1230
56. 63. 71. 80. 90. 100 112 125 140 160 180 225
-M---M---M---M---M---M---M---M---M---M---M---M---
7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5
A A A A A A A A A A A A
132 132 132 132 132 132 132 132 132 132 132 132
20.5 20.5 20.5 20.2 20.0 19.6 19.6 19.6 19.2 19.2 18.8 18.8
398.0 332.3 257.8 216.7
3.64 4.36 5.63 6.69
259 310 399 475
6.48 5.61 4.30 2.72
5382 6447 8311 9887
PL0310 PL0310 PL0310 PL0310
3.6 4.5 5.6 7.1
-M---M---M---M---
11. 11. 11. 11.
A A A A
160 160 160 160
29.0 29.0 27.6 23.5
398.0 332.3 257.8 216.7 398.0
3.64 4.36 5.63 6.69 3.64
259 310 399 475 259
9.32 7.87 6.35 4.18 6.48
5382 6447 8311 9887 5382
PL0510 PL0510 PL0510 PL0510 PL0310
3.6 4.5 5.6 7.1 3.6
-M---M---M---M---M---
11. 11. 11. 11. 11.
A A A A A
160 160 160 160 160
30.2 30.2 28.8 24.5 29.0
32 Benzler Series P Cat .indd 32
21/03/2013 13:20
SERIES P
MOTORISED RATINGS MOTORISED RATINGS
11 kW 4-pole
15 kW 4-pole
18.5 kW 4-pole
n2
Ratio i
M2 (Nm)
45.8 38.5 32.4
1713 2052 2224 2645 3147
fm
3.84 3.31 2.31 1.97 1.41
Fr2 (N) 41000 41000 41000 41000 41000
PL0820 PL0820 PL0820 PL0820 PL0820
31.64 37.64 44.79
2224 2645 3147
3.09 2.62 1.88
41000 41000 41000
398.0 332.3 257.8 216.7
3.64 4.36 5.63 6.69
353 422 545 648
4.75 4.12 3.15 1.99
398.0 332.3 257.8 216.7
3.64 4.36 5.63 6.69
353 422 545 648
109.3 91.2 76.2 70.8 59.5 49.7 45.8 38.5 32.4
13.27 15.90 19.04 20.49 24.38 29.20 31.64 37.64 44.79
76.2 70.8 59.5 49.7 45.8 38.5 32.4
59.5 49.7 45.8 38.5 32.4
24.38 29.20 31.64 37.64 44.79
Unit Designation
Motor Frame
Pt (kW)
25. 28. 32. 36 45.
-M---M---M---M---M---
11. 11. 11. 11. 11.
A A A A A
160 160 160 160 160
24.5 24.5 26.2 24.0 22.1
PL1220 PL1220 PL1220
32. 36. 45.
-M---M---M---
11. 11. 11.
A A A
160 160 160
27.7 25.3 23.4
5382 6447 8311 9887
PL0310 PL0310 PL0310 PL0310
3.6 4.5 5.6 7.1
-M---M---M---M---
15. 15. 15. 15.
A A A A
160 160 160 160
29.0 29.0 27.6 23.5
6.84 5.77 4.66 3.07
5382 6447 8311 9887
PL0510 PL0510 PL0510 PL0510
3.6 4.5 5.6 7.1
-M---M---M---M---
15. 15. 15. 15.
A A A A
160 160 160 160
30.2 30.2 28.8 24.5
1272 1523 1825 1964 2336 2798 3032 3607 4292
4.31 3.79 3.27 3.18 2.81 2.43 1.70 1.44 1.04
24832 29745 35630 38343 41000 41000 41000 41000 41000
PL0820 PL0820 PL0820 PL0820 PL0820 PL0820 PL0820 PL0820 PL0820
14. 16. 20. 22. 25. 28. 32. 36 45.
-M---M---M---M---M---M---M---M---M---
15. 15. 15. 15. 15. 15. 15. 15. 15.
A A A A A A A A A
160 160 160 160 160 160 160 160 160
27.6 27.6 27.6 26.9 24.5 24.5 26.2 24.0 22.1
19.04 20.49 24.38 29.20 31.64 37.64 44.79
1825 1964 2336 2798 3032 3607 4292
4.05 3.93 3.48 3.00 2.26 1.92 1.38
35630 38343 41000 41000 41000 41000 41000
PL1220 PL1220 PL1220 PL1220 PL1220 PL1220 PL1220
20. 22. 25. 28. 32. 36. 45.
-M---M---M---M---M---M---M---
15. 15. 15. 15. 15. 15. 15.
A A A A A A A
160 160 160 160 160 160 160
29.1 28.4 25.9 25.9 27.7 25.3 23.4
398.0 332.3 257.8 216.7
3.64 4.36 5.63 6.69
430 516 665 791
8.63 7.44 6.05 4.99
6817 8165 10526 12523
PL0810 PL0810 PL0810 PL0810
3.6 4.5 5.6 7.1
-M---M---M---M---
18. 18. 18. 18.
A A A A
180 180 180 180
44.4 44.4 42.4 36.0
109.3 91.2 76.2 70.8 59.5 49.7 45.8 38.5 32.4
13.27 15.90 19.04 20.49 24.38 29.20 31.64 37.64 44.79
1568 1878 2250 2421 2881 3451 3739 4448 5292
3.49 3.08 2.65 2.58 2.28 1.97 1.38 1.17 0.84
24832 29745 35630 38343 41000 41000 41000 41000 41000
PL0820 PL0820 PL0820 PL0820 PL0820 PL0820 PL0820 PL0820 PL0820
14. 16. 20. 22. 25. 28. 32. 36 45.
-M---M---M---M---M---M---M---M---M---
18. 18. 18. 18. 18. 18. 18. 18. 18.
A A A A A A A A A
180 180 180 180 180 180 180 180 180
27.6 27.6 27.6 26.9 24.5 24.5 26.2 24.0 22.1
109.3 91.2 76.2 70.8 59.5 49.7 45.8 38.5 32.4
13.27 15.90 19.04 20.49 24.38 29.20 31.64 37.64 44.79
1568 1878 2250 2421 2881 3451 3739 4448 5292
4.32 3.81 3.28 3.19 2.82 2.43 1.84 1.56 1.12
24832 29745 35630 38343 41000 41000 41000 41000 41000
PL1220 PL1220 PL1220 PL1220 PL1220 PL1220 PL1220 PL1220 PL1220
14. 16. 20. 22. 25. 28. 32. 36. 45.
-M---M---M---M---M---M---M---M---M---
18. 18. 18. 18. 18. 18. 18. 18. 18.
A A A A A A A A A
180 180 180 180 180 180 180 180 180
29.1 29.1 29.1 28.4 25.9 25.9 27.7 25.3 23.4
33 Benzler Series P Cat .indd 33
21/03/2013 13:20
SERIES P
MOTORISED RATINGS MOTORISED RATINGS
22 kW 4-pole
30 kW 4-pole
n2
Ratio i
M2 (Nm)
398.0 332.3 257.8 216.7
517 620 799 950
fm
7.18 6.19 5.04 4.15
Fr2 (N) 6817 8165 10526 12523
PL0810 PL0810 PL0810 PL0810
3.64 4.36 5.63 6.69
517 620 799 950
8.89 7.66 6.24 5.47
6817 8165 10526 12523
398.0 332.3 257.8 216.7
3.64 4.36 5.63 6.69
705 845 1089 1296
5.27 4.54 3.69 3.04
398.0 332.3 257.8 216.7
3.64 4.36 5.63 6.69
705 845 1089 1296
6.52 5.62 4.57 4.01
398.0 332.3 257.8 216.7
3.64 4.36 5.63 6.69
Unit Designation
Motor Frame
Pt (kW)
3.6 4.5 5.6 7.1
-M---M---M---M---
22. 22. 22. 22.
A A A A
180 180 180 180
44.4 44.4 42.4 36.0
PL1210 PL1210 PL1210 PL1210
3.6 4.5 5.6 7.1
-M---M---M---M---
22. 22. 22. 22.
A A A A
180 180 180 180
46.3 46.3 44.1 37.5
6817 8165 10526 12523
PL0810 PL0810 PL0810 PL0810
3.6 4.5 5.6 7.1
-M---M---M---M---
30. 30. 30. 30.
A A A A
200 200 200 200
44.4 44.4 42.4 36.0
6817 8165 10526 12523
PL1210 PL1210 PL1210 PL1210
3.6 4.5 5.6 7.1
-M---M---M---M---
30. 30. 30. 30.
A A A A
200 200 200 200
46.3 46.3 44.1 37.5
34 Benzler Series P Cat .indd 34
21/03/2013 13:20
SERIES P
LUBRICATION LUBRICATION
Lubrication 1. Check that the ventilator is positioned correctly for the intended mounting position. 2. Gear units are supplied without lubricant and must be filled via the ventilator position with the appropriate lubricant until oil escapes through the level plug hole. Please refer to the lubricant quantity table for approximate lubricant quantity Refer to the unit nameplate for the type and grade of lubricant. Refer the table of approved lubricants. 3. Maintenance: Oil levels should be checked and maintained by filling via the ventilator position until oil escapes through the level plug hole.
Mounting Positions and Lubrication Fill Levels
B3
B8
B5
B6
B7
V1
V5
V6
V3
Drain Position
Level Position
Ventilator / Filling
Lubricant Quantities (Litres) Position B3 B5 B6 B7 B8 V1 V3 V5 V6
PL0110 1.4 0.8 1.2 1.2 0.9 1.6 1.6 2.4 2.4
PL0120 1.6 1.0 1.4 1.4 1.1 2.0 2.0 2.8 2.8
PL0130 1.8 1.2 1.6 1.6 1.3 2.4 2.4 3.2 3.2
PL0140 2.0 1.4 1.8 1.8 1.5 2.8 2.8 3.6 3.6
PL0210 1.4 0.8 1.2 1.2 0.9 1.6 1.6 2.4 2.4
PL0220 1.6 1.0 1.4 1.4 1.1 2.0 2.0 2.8 2.8
PL0230 1.8 1.2 1.6 1.6 1.3 2.4 2.4 3.2 3.2
PL0240 2.0 1.4 1.8 1.8 1.5 2.8 2.8 3.6 3.6
PL0310 3.6 2.0 2.9 2.9 2.2 4.1 4.1 5.9 5.9
PL0320 3.5 1.9 2.8 2.8 2.0 3.8 3.8 5.7 5.7
PL0330 3.7 2.1 3.0 3.0 2.2 4.2 4.2 6.0 6.0
PL0340 3.9 2.3 3.2 3.2 2.4 4.6 4.6 6.4 6.4
Position B3 B5 B6 B7 B8 V1 V3 V5 V6
PL0510 3.6 2.0 2.9 2.9 2.1 4.0 4.0 5.9 5.9
PL0520 3.5 1.9 2.8 2.8 2.0 3.8 3.8 5.6 5.6
PL0530 3.7 2.1 3.0 3.0 2.2 4.2 4.2 6.0 6.0
PL0540 3.9 2.3 3.2 3.2 2.4 4.6 4.6 6.4 6.4
PL0810 6.7 3.3 5.3 5.3 3.7 6.6 6.6 10.7 10.7
PL0820 6.9 3.6 5.6 5.6 3.9 7.2 7.2 11.2 11.2
PL0830 6.8 3.5 5.5 5.5 3.8 7.0 7.0 11.0 11.0
PL0840 7.0 3.7 5.7 5.7 4.0 7.4 7.4 11.4 11.4
PL1210 6.7 3.4 5.4 5.4 3.7 6.7 6.7 10.8 10.8
PL1220 7.0 3.6 5.6 5.6 4.0 7.2 7.2 11.3 11.3
PL1230 6.9 3.5 5.5 5.5 3.9 7.0 7.0 11.1 11.1
PL1240 7.1 3.7 5.7 5.7 4.1 7.4 7.4 11.5 11.5
35 Benzler Series P Cat .indd 35
21/03/2013 13:20
SERIES P
LUBRICATION LUBRICATION
Approved Lubricants
Type E
CLP (CC)
Mineral Oil Containing Industrial Anti-Wear or EP Additives SUPPLIER BP Oil International Lim ited Caltex Castrol International Esso/Exxon Fuchs Lubricants Klüber Lubrication Kuwait Petroleum International Mobil Oil Com pany Lim ited Optim al Ölwerke Gm bH Petro-Canada Rocol Shell Oils Texaco Lim ited Total Tribol Gm bH
LUBRICANT TYPE
5E
6E
7E
Energol GR-XF Energol GR-XP Meropa Alpha SP Spartan EP Renolin CLP Klüberoil GEM1 Q8 Goya Mobil gear 600-XP series Mobil gear XMP Optigear BM Ultim a EP Sapphire Hi-Torque Om ala Om ala F Meropa Meropa W M Carter EP Tribol 1100
220 (-16) 220 (-15) 220 (-4) 220 (-16) 220 (-12) 220 (-16) 220 (-5) 220 (-16) 630 (-13) 220 (-19) 220 (-11) 220 (-22) 220 (-13) 220 (-4) 220 (-13) 220 (-16) 220 (-19) 220 (-7) 220 (-20)
320 (-13) 320 (-10) 320 (-4) 320 (-16) 320 (-12) 320 (-14) 320 (-5) 320 (-13) 632 (-13) 320 (-13) 320 (-10) 320 (-16) 320 (-13) 320 (-4) 320 (-10) 320 (-16) 320 (-16) 320 (-7) 320 (-18)
460 (-1) 460 (-7) 460 (-4) 460 (-1) 460 (-4) 460 (-12) 460 (-5) 460 (-10) 634 (-1) 460 (-7) 460 (-7) 460 (-10) 460 (-13) 460 (-4) 460 (-4) 460 (-10) 460 (-11) 460 (-4) 460 (-16)
Type H CLP (HC) Polyalphaolefin Synthetic Lubricants with Anti-Wear or EP additives SUPPLIER
LUBRICANT TYPE
5H
6H
BP Oil International Limited Caltex
Enersyn EPX Pinnacle EP Alphasyn EP Alphasyn T Spartan Synthetic EP Renolin Unisyn CLP Klübersynth GEM4 Q8 El Greco Mobilgear SHC Optigear Synthetic A Super Gear Fluid Omala HD Pinnacle EP Carter SH Tribol 1510
220 (-43) 220 (-37) 220 (-31) 220 (-46) 220 (-37) 220 (-30) 220 (-22) 220 (-40) 220 (-31) 220 (-43) 220 (-43) 220 (-43) 220 (-34) 220 (-36)
320 (-28) 320 (-43) 320 (-31) 320 (-28) 320 (-43) 320 (-34) 320 (-25) 320 (-19) 320 (-37) 320 (-31) 320 (-37) 320 (-40) 320 (-43) 320 (-31) 320 (-33)
Castrol International Esso/Exxon Fuchs Lubricants Klüber Lubrication Kuwait Petroleum International Mobil Oil Company Limited Optimal Ölwerke GmbH Petro-Canada Shell Oils Texaco Limited Total Tribol GmbH
Numbers in brackets indicate the minimum pour point temperature of the specified oil (°C) THE GEAR UNIT MUST NOT BE RUN BELOW THIS TEMPERATURE
Approved Greases NLGI grade 2 grease Suitable for operation in ambient temperatures of -20°C to 50°C (For use outside of this range please contact our Application Engineers) SUPPLIER
GREASE TYPE
BP Oil International Limited Caltex Castrol International Fuchs Lubricants Klüber Lubrication Mobil Oil Company Limited Omega Optimol
Energrease LS-EP Mulifak EP LMX Grease Renolit EP Klüberlub BE41-542 Mobilgrease XHP Omega 85 Longtime PD Albida RL Alvania EP B Multifak EP
Shell Oils Texaco Limited
36 Benzler Series P Cat .indd 36
21/03/2013 13:20
SERIES P SHIPPING SPECIFICATION SHIPPING SPECIFICATION SHIPPING SPECIFICATION
B R B R
B M B M
F R F R
F M F M
63 BR
PL0110 BR
63 BM
FR
71 FM
71 BM
30 FR 27 BM 28FM 25BM 28FM
80
90
100
112
132
FM 80 BM
FM 90BM
FM 100BM
FM112BM
FM132BM
160
FM160 BM
180
180 BM FM
200
200 BM FM
FM
25BM
30 FM
27 BM
30 FM
27 BM
31 FM
27 BM
31 FM
27 BM
32 FM
29 BM
FM-
BM-
FM-
BM-
FM-
-
PL0110 PL0120
30 36 27 33 28
34 25
31 28
3525
3130
3627
3330
27 36
31 33
27 37
31 34
27 37
32 34
29 38
35
--
--
- -
- -
- -
-
PL0120 PL0130
36 42 33 39 34
40 31
37 35
4131
3836
4233
3936
33 42
37 39
34 43
37 40
34 43
38 40
35 44
41
--
--
- -
- -
- -
-
PL0130 PL0140
42 48 39 45 40
46 37
43 41
4738
4442
4839
4542
39 48
43 45
40 49
43 46
40 49
44 46
41 51
48
--
--
- -
- -
- -
-
PL0140 PL0210
48 32 45 29 46
30 43
27 47
3144
2848
3245
2948
45 32
49 29
46 33
49 30
46 33
51 30
48 34
31
--
--
- -
- -
- -
-
PL0210 PL0220
32 38 29 35 30
36 27
33 31
3728
3432
3829
3532
29 38
33 35
30 39
33 36
30 39
34 36
31 41
37
--
--
- -
- -
- -
-
PL0220 PL0230
38 45 35 42 36
43 33
40 37
4334
4038
4535
4238
35 45
39 42
36 46
39 42
36 46
41 42
37 47
44
--
--
- -
- -
- -
-
PL0230 PL0240
45 51 42 48 43
49 40
46 43
5040
4645
5142
4845
42 51
46 48
42 52
46 49
42 52
47 49
44 53
50
--
--
- -
- -
- -
PL0240 PL0310
51 65 48 58 49
- 46
- 50
- 46
- 51
- 48
-51
-48
-52
49 -
52 -
49 -
53 -
50 64
57
-67
- 61
-
-
PL0310 PL0320
65 65 58 59 -
64 -
57 -
64 -
58 -
65 -
59-
65-
59-
66-
60
66
64 60
57 68
67 61
61-
67-
61 -
- -
- -
-
PL0320 PL0330
65 72 59 66 64
70 57
64 64
7058
6465
7259
6665
59 72
66 66
60 73
66 66
60 73
68 66
61 74
68
--
--
- -
- -
- -
-
PL0330 PL0340
72 78 66 72 70
76 64
70 70
7764
7072
7866
7272
66 78
73 72
66 79
73 73
66 79
74 73
68 80
74
--
--
- -
- -
- -
-
PL0340 PL0510
78 69 72 63 76
- 70
- 77
- 70
- 78
- 72
-78
-72
-79
73 -
79 -
73 -
80 -
74 68
62
-72
-66
-71
- 65
- -
-
PL0510 PL0520
69 74 63 68 -
72 -
66 -
73 -
66 -
74 -
68-
74-
68-
75-
69
75
68 69
62 76
72 70
66-
71-
65 -
- -
- -
-
PL0520 PL0530
74 80 68 74 72
78 66
72 73
7966
7374
8068
7474
68 80
75 74
69 81
75 75
69 81
76 75
70 82
76
--
--
- -
- -
- -
-
PL0530 PL0540
80 86 74 80 78
84 72
78 79
8573
7980
8674
8080
74 86
81 80
75 87
81 81
75 87
82 81
76 89
82
--
--
- -
- -
- -
-
PL0540 PL0810
86 111 80 100 84
- 78
- 85
- 79
- 86
- 80
-86
-80
-87
81 -
87 -
81 -
89 -
82-
--
115
104
-115
-104
-117
117 108
PL0810 PL0820 111 117100
106 -
-67
-61
106
-
- -
- -
- -
- -
--
--
--
--
--
-
-
116
115 105
104 119
115 108
104 119
106-
-
PL0820 PL0830 117 118 106 107 -
116 -
105 -
116 -
105-
118-
107-
118-
107
119
107
119
116 107
105 120
119 109
108-
119-
108-
- -
- -
-
PL0830 PL0840 118 124 107 113116
105 111 118 122105 111116 123
107 124
118 113
107 124
119 113
107 125
119 114
107 125
120 114
109 126
115
--
--
- -
- -
- -
-
126 -
115 -
--
123
112
-123
-111
-125
125 120
-
PL0840 PL1210 124 118 113 107122
- 111
PL1210 PL1220 118 129 107 118
-
- 111
-124
-113
-124
113 -
125 -
114 -
125 -
114 -
113
-
- -
- -
- -
- -
--
--
--
--
--
-
-
128
123 117
112 132
123 120
111 131
113-
-
PL1220 PL1230 129 134 118 123 -
132 -
121 -
133 -
121-
134-
123-
134-
123
135
124
135
128 124
117 136
132 125
120-
131-
120-
- -
- -
-
PL1230 PL1240 134 140 123 129132
121 127 134 138121 127133 139
123 140
134 129
123 140
135 129
124 141
135 130
124 141
136 130
125 142
131
--
--
- -
- -
- -
-
129
140
129
141
130
141
130
142
131
-
-
-
-
-
PL1240
140
129
-
- 123
138
127
139
127
140
-
37 Benzler Series P Cat .indd 37
21/03/2013 13:20
SERIES P IMPORTANT Product Safety Information General - The following information is important in ensuring safety. It must be brought to the attention of personnel involved in the selection of power transmission equipment, those responsible for the design of the machinery in which it is to be incorporated and those involved in its installation, use and maintenance. Our equipment will operate safely provided it is selected, installed, used and maintained properly. As with any power transmission equipment proper precautions must be taken as indicated in the following paragraphs, to ensure safety. Potential Hazards - these are not necessarily listed in any order of severity as the degree of danger varies in individual circumstances. It is important therefore that the list is studied in its entirety:1) Fire/Explosion (a) Oil mists and vapour are generated within gear units. It is therefore dangerous to use naked lights in the proximity of gearbox openings, due to the risk of fire or explosion. (b) In the event of fire or serious overheating (over 300 oC), certain materials (rubber, plastics, etc.) may decompose and produce fumes. Care should be taken to avoid exposure to the fumes, and the remains of burned or overheated plastic/rubber materials should be handled with rubber gloves. 2) Guards - Rotating shafts and couplings must be guarded to eliminate the possibility of physical contact or entanglement of clothing. It should be of rigid construction and firmly secured. 3) Noise - High speed gearboxes and gearbox driven machinery may produce noise levels which are damaging to the hearing with prolonged exposure. Ear defenders should be provided for personnel in these circumstances. Reference should be made to the Department of Employment Code of Practice for reducing exposure of employed persons to noise. 4) Lifting - Where provided (on larger units) only the lifting points or eyebolts must be used for lifting operations (see maintenance manual or general arrangement drawing for lifting point positions). Failure to use the lifting points provided may result in personal injury and/or damage to the product or surrounding equipment. Keep clear of raised equipment. 5) Lubricants and Lubrication (a) Prolonged contact with lubricants can be detrimental to the skin. The manufacturer’s instruction must be followed when handling lubricants. (b) The lubrication status of the equipment must be checked before commissioning. Read and carry out all instructions on the lubricant plate and in the installation and maintenance literature. Heed all warning tags. Failure to do so could result in mechanical damage and in extreme cases risk of injury to personnel. 6) Electrical Equipment - Observe hazard warnings on electrical equipment and isolate power before working on the gearbox or associated equipment, in order to prevent the machinery being started. 7) Installation, Maintenance and Storage (a) In the event that equipment is to be held in storage, for a period exceeding 6 months, prior to installation or commissioning, we must be consulted regarding special preservation requirements. Unless otherwise agreed, equipment must be stored in a building protected from extremes of temperature and humidity to prevent deterioration.
The rotating components (gears and shafts) must be turned a few revolutions once a month (to prevent bearings brinelling).
(b) External gearbox components may be supplied with preservative materials applied, in the form of a “waxed” tape overwrap or wax film preservative. Gloves should be worn when removing these materials. The former can be removed manually, the latter using white spirit as a solvent.
Preservatives applied to the internal parts of the gear units do not require removal prior to operation.
(c) Installation must be performed in accordance with the manufacturer’s instructions and be undertaken by suitably qualified personnel. (d) Before working on a gearbox or associated equipment, ensure that the load has been removed from the system to eliminate the possibility of any movement of the machinery and isolate power supply. Where necessary, provide mechanical means to ensure the machinery cannot move or rotate. Ensure removal of such devices after work is complete. (e) Ensure the proper maintenance of gearboxes in operation. Use only the correct tools and our approved spare parts for repair and maintenance. Consult the Maintenance Manual before dismantling or performing maintenance work. 8) Hot Surfaces and Lubricants (a) During operation, gear units may become sufficiently hot to cause skin burns. Care must be taken to avoid accidental contact. (b) After extended running the lubricant in gear units and lubrication systems may reach temperatures sufficient to cause burns. Allow equipment to cool before servicing or performing adjustments. 9) Selection and Design (a) Where gear units provide a backstop facility, ensure that back-up systems are provided if failure of the backstop device would endanger personnel or result in damage. (b) The driving and driven equipment must be correctly selected to ensure that the complete machinery installation will perform satisfactorily, avoiding system critical speeds, system torsional vibration, etc. (c) The equipment must not be operated in an environment or at speeds, powers, torques or with external loads beyond those for which it was designed. (d) As improvements in design are being made continually the contents of this catalogue are not to be regarded as binding in detail, and drawings and capacities are subject to alterations without notice. The above guidance is based on the current state of knowledge and our best assessment of the potential hazards in the operation of the gear units. Any further information or clarification required may be obtained by contacting our Application Engineers.
38 Benzler Series P Cat .indd 38
21/03/2013 13:20
SERIES P NOTES
39 Benzler Series P Cat .indd 39
21/03/2013 13:20
CONTACT US
AUSTRALIA
DENMARK
SWEDEN & NORWAY
UNITED KINGDOM
Radicon Transmission (Australia) PTY Ltd Australia
Benzler Transmission A/S Fuglebævej 3D DK-2770 Kastrup, Denmark
AB Benzlers Box 922 (Landskronavägen 1) 251 09 Helsingborg Sweden
Tel: +45 36 34 03 00 Fax: +45 36 77 02 42
Tel: +46 42 18 68 00 Fax: +46 42 21 88 03
Radicon Transmission UK Ltd Unit J3 Lowfields Business Park, Lowfields Way, Elland West Yorkshire, HX5 9DA
FINLAND
THAILAND
Oy Benzler AB Vanha Talvitie 3C FI-00580 Helsingfors, Finland
Radicon Transmission (Thailand) Ltd 700/43 Moo 6 Amata Nakorn Industrial Estate Tumbol Klongtumru Muang, Chonburi 20000 Thailand
Tel: +61 488 054 028 EUROPE Benzler TBA BV Jachthavenweg 2 NL-5928 NT Venlo Austria Tel: +43 7 229 618 91 Fax: +43 7 229 618 84 France Tel: +33 687 718 711 Fax: +31 77 324 59 01 Germany Tel: 0800 350 40 00 Fax: 0800 350 40 01 Italy Tel: +39 02 824 3511
Tel: +358 9 340 1716 Fax: +358 10 296 2072 INDIA Elecon. Engineering Company Ltd. Anand Sojitra Road Vallabh Vidyanagar 388120 Gujarat India
Tel: +66 3845 9044 Fax: +66 3821 3655
Netherlands & the rest of Europe Tel: +91 2692 236513 Tel: +31 77 324 59 00 Fax: +91 2692 227484 Fax: +31 77 324 59 01
www.benzlers.com www.radicon.com
Tel: Fax:
+44 (0) 1484 465 800 +44 (0) 1484 465 801
USA Radicon USA Transmission Ltd 1599 Lunt Avenue Elk Grove Village Chicago Illinois 60007 USA Tel: +1 847 593 9910 Fax: +1 847 593 9950
Benzlers Denmark +45 36 34 03 00 Finland +358 9 340 1716 Germany +49 800-350 4000 Italy +39 02 824 3511 Sweden +46 42 186800 +46 19 178 090 The Netherlands +31 77 324 59 00 www.benzlers.com Radicon Australia +61 488 054 028 Thailand +66 3845 9044 United Kingdom +44 (0) 1484 465 800 USA +1 847 593 9910 www.radicon.com