5 minute read
Grommets
Grommets
Grommets are perfect for low load applications, easy to insert in either brass or nickel plated brass. A full range of cutting and closing tools are also available.
Brass Grommets
Code Description Approx Closed Hole Size (mm) Pack Qty GRO109 No 000 Brass Grommets 5 100 GRO108 No 00 Brass Grommets 6.5 100 GRO107 No 0 Brass Grommets 8 100 GRO101 No 1 Brass Grommets 9.5 100 GRO102 No 2 Brass Grommets 12 100 GRO103 No 3 Brass Grommets 13 100 GRO104 No 4 Brass Grommets 15 100 GRO105 No 5 Brass Grommets 17 100 GRO106 No 6 Brass Grommets 20 100
Nickel Plated Brass Grommets
Code Description Approx Closed Hole Size (mm) Pack Qty GRO209 No 000 Nickel Plated Grommets 5 100 GRO208 No 00 Nickel Plated Grommets 6.5 100 GRO207 No 0 Nickel Plated Grommets 8 100 GRO201 No 1 Nickel Plated Grommets 9.5 100 GRO202 No 2 Nickel Plated Grommets 12 100 GRO203 No 3 Nickel Plated Grommets 13 100 GRO204 No 4 Nickel Plated Grommets 15 100 GRO205 No 5 Nickel Plated Grommets 17 100 GRO206 No 6 Nickel Plated Grommets 20 100
Tool Options
Size Cutter High Speed Cutter Closing Tool 000 CUT809 HIG805 GRO809 00 CUT808 HIG808 GRO808 0 CUT807 HIG810 GRO807 1 CUT801 HIG811 GRO801 2 CUT802 HIG812 GRO802 3 CUT803 HIG814 GRO803 4 CUT804 HIG816 GRO804 5 CUT805 HIG819 GRO805 6 CUT806 HIG822 GRO806
Grommets - Miscellaneous Stainless Steel
Stainless Steel Grommets
Code Description GRO511 No. 1 Stainless Grommets GRO514 No. 4 Stainless Grommets Pack Qty 100 100
Curtain Grommets
Code Description GRO555 Stainless Steel Curtain Grommets (38mm) Pack Qty 1
Hand Cutting Punch
Code Description Hole Dia (mm) CUT809 Cutting Tool for No 000 Grommets 4.8 CUT808 Cutting Tool for No 00 Grommets 7.9 CUT807 Cutting Tool for No 0 Grommets 9.5 CUT801 Cutting Tool for No 1 Grommets 10 CUT802 Cutting Tool for No 2 Grommets 12.7 CUT803 Cutting Tool for No 3 Grommets 14.3 CUT804 Cutting Tool for No 4 Grommets 15.9 CUT805 Cutting Tool for No 5 Grommets 19.1 CUT806 Cutting Tool for No 6 Grommets 22.2 CUT820 Cutting Tool for No 7 Grommets 20 CUT828 Cutting Tool for No 8 Grommets 28 CUT831 Cutting Tool for No 9 Grommets 31 CUT835 Cutting Tool (35mm) 35 CUT838 Cutting Tool (38mm) for GRO555 39.2 Code Description CUT800 Cutting Tool for Lift-The-Dot & Turn Buttons Hole Dia (mm)
High Speed Cutters
High Speed Cutters offer a fast, reliable and clean hole cutting solution using a low cost range of tools designed to use with any electric or pillar drill. Using a simple standard ejector component, onto which screws a range of cutters, you will have a complete production hole cutting system.
High quality, accurate holes Sides of the hole cut are parallel so preventing the distortion associated with tapered punches Ideal for cutting stubborn materials such as heavy canvas and webbing Suitable for endeavour rings, grommets, rivets etc. Retains sharp cutting edge for over 10,000 cuts (in average materials)
The cutters are used with a standard size ejector unit to remove waste cloth. For fast operation, an ejector unit for each cutter is recommended however, the cutters are interchangeable so one ejector unit will suffice.
Code Description Nominal Dia (mm) EJE801 Standard Ejector n/a HIG805 High Speed Cutter 5 HIG809 High Speed Cutter 9 HIG810 High Speed Cutter 10 HIG811 High Speed Cutter 11 HIG812 High Speed Cutter 12.7 HIG813 High Speed Cutter 13 HIG815 High Speed Cutter 15 Code Description Nominal Dia (mm) HIG816 High Speed Cutter 16 HIG817 High Speed Cutter 17 HIG819 High Speed Cutter 19 HIG823 High Speed Cutter 23 HIG827 High Speed Cutter 27 HIG832 High Speed Cutter 32 HIG837 High Speed Cutter 37 HIG841 High Speed Cutter 41 EJE801 HIG817
Grommet Closing Tools
Code Description GRO809 For No 000 Grommets GRO808 For No 00 Grommets GRO807 For No 0 Grommets GRO801 For No 1 Grommets GRO802 For No 2 Grommets GRO803 For No 3 Grommets GRO804 For No 4 Grommets GRO805 For No 5 Grommets Code Description GRO806 For No 6 Grommets GRO851 For No 1 Stainless Grommets GRO854 For No 4 Stainless Grommets GRO855 For Curtain Grommets (38mm)
GRO805
Self-Piercing Grommets
Nickel Plated Brass Grommets with toothed washer No Cutters needed Special tools required - as shown
Code Description
GRO401 Self-Piercing Grommet No 1 GRO402 Self-Piercing Grommet No 2
GRO839 Choice of Die No. 1 & 2: Height = 380 mm, Throat Depth = 70 mm, Weight (inc Stand) = 9kgs
GRO841 Self-Piercing No 1 Die for GRO839 Handpress GRO842 Self-Piercing No 2 Die for GRO839 Handpress Closed Hole Size (mm) Pack Size 9.53 100 11.91 100
GRO842 GRO839
A truly portable eyeleting machine. It is small and light enough to use anywhere it is needed, even on site. It is simple to operate and minimal training is required. The machine punches a hole and sets the eyelet and washer in one operation. It is suitable for self piercing eyelets from 6mm to 13mm (size SPU to SPY and SP1 and SP2 Grommet Eyelets). Tool changes to switch eyelet sizes are achieved in a matter of seconds.
Breather Eyelets
Snap together "Breather" Eyelets in black plastic Use in sides of cushions Reinforce base fabric if necessary
Code Description Breather Eyelet (mm) Approx Closed Hole (mm) BRE000 Black Breather Eyelet - Small 20 9 BRE001 Black Breather Eyelet - Large 27 14
*Minimum order quantity 10 BRE000
BRE001
Eyelets & Washers
Kits of Brass Eyelets which include a cutting and closing tool. Ideal for smaller one-off jobs or for retail.
Code Description Hole Size (mm) Number of Grommets Quantity in Kit GRO618 Eyelet Kit No 18 5 000 50 GRO620 Eyelet Kit No 20 6.75 00 50 GRO622 Eyelet Kit No 22 8 0 25 GRO624 Eyelet Kit No 24 9.5 1 25 GRO626 Eyelet Kit No 26 12 2 25 GRO628 Eyelet Kit No 28 13 3 15
GRO620
