Cover Support & Venting Systems

Vico Marine are experienced in the marine industry and are dedicated to making your experience better, working tirelessly to ensure high quality designs to meet customer needs..

Boat Vent 3 LT

No reinforcement piece needed Installs in less than 15 seconds

Centre seam option

Code Description VEN002 Boat Vent Black 3 VEN003 Boat Vent White 3 Only quick change, replaceable vent on the market Inside hole fits 3/4" tube or spline tip for improved fit

VEN002 VEN003

Boat Vent 4 Sewable

Ease of installation:

Screw-in style lead-in for fabric

Lip will hold fabric in place for sewing

Removable top creates more efficient work area for sewing

Inside hole fits 3/4" tube or spline tip for improved fit

Code Description VEN010 Boat Vent Sew on 4 Black Strong soft material with UV inhibitor Can be installed with or without reinforcement piece Low profile design Matt finish

VEN010 VEN010

Boat Vent Aero™

Great venting solution to use where tenting with the Boat Vent 3 or 4 may not be an option (i.e. cockpit cover, camper cover, boom cover).

Louver prevents bees or rodents/heavy rain from entering cover Made from rubberlike TPE

Easy to sew in For angled installation

Code Description Colour VEN004 Boat Vent Aero 1 Piece Small Black VEN005 Boat Vent Aero 1 Piece Small White VEN006 Boat Vent Aero Large Black VEN007 Boat Vent Aero Large White Soft and durable material will not mark or damage the finish of higher end wood boats and gel coats Louver can be cut off easily Small (2 piece): Louver - 12.7 x 13 x 3.8cm, Grill - 6.8 x 13 x 3.8cm Large (1 piece): 27.3 x 19.7 x 5.1cm

Vico Tools

Code Description VEN000 Boat Vent 3 Circle Cutter VENOOO-S Boat Vent Socket VENOOO-W Boat Vent Wrench VENOOO-WA Centre Seam Vent Insert For BV3 VENOOO-CC Replacement Blade For Circle Cutter VEN000 VEN000-S VEN000-WA

VEN000-W VEN000-CC

Extending Support Pole

Made from anodized, ribbed, heavy-duty aluminium. These are combined with the easily adjustable collars, ensuring high strength and secure length adjustment.

Designed to perfectly support Boat Vent 3 5 different length options: 1. 48 - 71cm, 2. 87 - 150cm, 3. 71 x 121cm, 4. 99 - 178cm, 4. 99 - 178cm, 5. 58 x 140cm (two collars), 5. 58 x 140cm (two collars) Pole Tips: Standard - Tight fitting spline tip Swedge Spline Tip Only

Code Description Colour

POL201 POL202 Extending Support Pole Extending Support Pole

48-71 87-150 POL203 Extending Support Pole 99-178 POL203-T Extending Support Pole for BV3 Spline Tip Option 99-178 POL204 Extending Support Pole 58-140 Snap

Note: Reverse pole to use other tip option .Pole comes with both tip options

Flex Support 2

An easy way to support your cover if venting is not required. The rubber sides are designed to "mushroom" down to match your covers angle, dispersing the weight and protecting it from rips and tears. This is a great alternative to snap or swedge tips.

Fits up into either 3/4" spline tip pole Durable rubber Can be sewed in or fit snuggly under the cover Can be tied down with 1" hook & loop straps or other 1" strap

Code Description POL207 Sew On Flex Support Cap

Rubber Pole Base

Designed for the support poles and makes installing your boat cover quick and easy. With the ability to swivel and hold the pole in place, you no longer have to climb in and out of your boat during installation. The thermoplastic rubber gives the pad a firm grip and its large base protects your flooring from damage caused by standard crutch tips and helps disperse the poles weight.

Code Description POL051 Rubber Feet for 3/4" tube POL052 Rubber Feet for 7/8" tube POL053 Rubber Feet for 1" tube POL022 Moulded End Cap