1
2 Paper that would otherwise land up at a recycling plant is rescued and repurposed.
3
Once the paper is fused it can be treated like any other fabric. We draw the pattern, cut it and stitch the bag or sleeve with great care.
4
Sprayed with an environmentally friendly nano liquid glass coating to make the paper water resistant.
Artwork size
Limited to twenty pricks
Colour
Single Large variety of colours available
Quantity
1-100
Price
VVV
Price calculated per needle prick Process
Post manufacture 2 - 20 working days
Notes
Placement limited to front pocket only Plain stitch embroidery only Geometric designs only Distance between pricks should not be more than 5cm
Artwork size
8cm x 4.5cm max (regular stamp pad) 9cm max (circular black stamp pad)
Colour
One colour Specific colours can be ordered*
Quantity
No minimums
Price
V
Stamp manufacture and unit stamping cost Process
During manufacture 3 – 7 working days
Notes
Will have a distressed look Fine print details are not always clear Magnets prevent stamping close to the edge of the flap Larger stamp pads and wider range of colours can be ordered but are subject to availability and additional lead times *Colours may not be an exact match
Artwork size
100cm x 150cm (maximum block size)
Colour
No colour
Quantity
10+
Price
VV
Block price (calculated per square millimeter), set-up and unit debossing cost Process
Pre or post manufacture 3 – 10 working days
Notes
No fine designs; bold designs add depth Maximum depth of block placement is 120cm from the edge Magnets prevent debossing close to the edge of the flap Possible bruising of paper on reverse side if debossed after manufacture
Artwork size
No limitations
Colour
Single to multiple pantone colours available
Quantity
25+
Price
VVV
Set-up and unit printing cost Process
Pre manufacture 3 – 15 working days
Notes
Will have a distressed look High quality Fine detail
Artwork size
100cm x 150cm (maximum block size)
Colour
One colour only Selection of metallic colours are available*
Quantity
10+
Price
VV
Block price (calculated per square millimeter), set-up and unit foiling cost Process
Pre or post manufacture 3 – 10 working days
Notes
Bold designs add depth Maximum depth of placement is 120cm from the edge Magnets prevent foiling close to the edge of the flap Possible bruising of paper on reverse side if foiled after manufacture * If specific colours are required they can be ordered but are subject to availability and additional charges
Artwork size
No limitations
Colour
Full colour
Quantity
10+
Price
VVVVV
Unit printing cost Process
Pre manufacture 3 – 5 working days
Notes
Will have a distressed look High quality Dark or intense prints are not advisable
Artwork size
9cm x 3.5cm (maximum size for tab) 5.5cm x 3cm (maximum design area for flat tab) 2cm x 3cm (maximum design area for folded-over tab)
Colour
Leather available in various colours Rivets: antique brass / antique nickel
Quantity
10+
Price
VV
Set-up and unit lasering cost Cost of leather calculated separately Process
Post manufacture 5 – 10 working days
Notes
Placement either flat on front pocket or flap (2 rivets) or fold-around on flap (1 rivet)
The Wren Design