Higher Precision Longer Life Manual Lathes European TUR630-710M TRI-V Lathes
5.5” spindle bore, D11 series, and TRI-V bedways
Features • 25” or 28” swing over bed x 78”, 118” or 157” bc • 20 HP main drive, 21 speeds • BIG 4.1” or 5.5” spindle bores with speeds up to 1800 RPM • 17” wide TRI-V bed design • Fully clutched headstock • Automatic positioning leadscrew and feed shaft supports • Heavy duty tailstock with 4” diameter quill and come-along • Easy operator’s controls, 4-way rapids, Americanized electronics • Top European quality and design • Higher precision spindle • 5.5” bore oil country version with rear nose for “dual” chucks • 1-88 TPI available • Feed reversal at apron • Wide range of options including toolpost, chip conveyor, taper attachment, chucks, steadies, VS, etc.
Convenient operator controls at carriage with 4-way rapids
www.toolmex.com
TUR630-710S/A European Built Manual Lathes Capacity / Model
Swing Over Bed Swing Over Cross Slide Distance Between Centers
25" TUR630S
25" TUR630A
28" TUR710S/A
24.8" 14.9" 78", 118", 157"
24.8" 14.9" 78", 118", 157"
28" 17.3" 118"
Headstock Spindle Bore (Option) Spindle Nose (Option) Spindle Speeds Spindle Bearings
4.1" D1-8 (24 Speeds) 18-1800 RPM
5.5" 4.1" (5.5) Dual D1-11 D1-8 (Dual D1-11) (21 Speeds) 15-1400 RPM (24 Speeds) 14-1400 RPM Front - Angular Contact Ball Bearings (SKF), 8.2" O.D.
Feeds & Threads 42 Longitudinal Feeds 42 Cross Feeds 42 Inch Threads 42 Metric Threads Leadscrew Diameter
.002-.121 IPR .001-.060 IPR 1-88 TPI 1-88 mm/rev 1.6" (4 TPI)
.002-.121 IPR .001-.060 IPR 1-88 TPI 1-88 mm/rev 1.6" (4 TPI)
.002-.121 IPR .001-.060 IPR 1-88 TPI 1-88 mm/rev 1.6" (4 TPI)
13" 24"
15" 24"
36" 6" 220 IPM / 110 IPM
13" 24" 9" x 31" with Dual T-Slots for Rear Fixturing 36" 6" 220 IPM / 110 IPM
38.5" 6" 220 IPM / 110 IPM
3.9" MT5 8"
3.9" MT5 8"
3.9" MT5 8"
20 HP 17" x 15.2" (3) 78" bc , (4) 118" bc 9,900 lbs.
20 HP 17" x 15.2" (3) 78" bc , (4) 118" bc 10,200 lbs.
20 HP 17" x 15.2" (4) 118" bc 10,700 lbs.
Carriage Cross Slide Travel Carriage Length Bearing on Ways Cross Slide Width x Length Saddle Length Supporting Cross Slide Top Slide Travel 4-Way Rapid Traverse (longitudinal/cross) Tailstock Quill Diameter Center, Morse Taper Quill Travel General Main Drive Motor TRI-V Bed, width x depth Number of Legs Supporting Bed Machine Weight, 118" bc
American manual quick change toolpost with T-slot compound
www.toolmex.com
2015 S. Mitchell Blvd., Schaumburg, IL 60193 +1-847-301-3700 • 800-992-4766 • Fax +1-847-301-3703 Scan and Explore
Distributed by
©2012 Toolmex Industrial Solutions. All rights reserved. All specifications on this sheet are subject to change without notice. Photos shown are a general representation of the various models and may include some optional equipment. Toolmex Industrial Solutions, Elektrim, and Elektrimax are trademarks of Toolmex Corporation, Inc. 4-999-7006 2-12 2.0