Heavy Duty Oil Country Ready Manual Plus CNC Lathes European TUR930MN/CNC TRI-V Lathes Features • Superior extra heavy-duty design, quality and performance for
Extra large TRI-V ways, and choice of Fanuc or Siemens CNC
8.6”-17.7” spindle bores (12.5” shown) with rear nose for “dual” chucks
www.toolmex.com
tougher parts work • 37” swing over bed x 78” - 393” bc (optional 43” swing, factory raised) • Extra heavy-duty headstock for energy industry application • Fanuc or Siemens CNC with conversational/cycle “Job Shop” programming • 30/45 HP main drive with CSS and 2-range headstock (optional 50/60 HP) • Big oil country 8.6”, 12.5”,14.2” or 17.7” spindle bores • 24.5” wide TRI-V bed design with extra-wide V-ways • Full length cross slide (13” wide / 14” wide bridge) • Up to 11,000 lbs bc with steadies • Enhanced “thread repair” cycles • Heavy-duty tailstock with 5” diameter quill • Easy operator’s controls and independent traveling panel with swivel option • Wide range of options including turrets, extra heavy-duty chucks, steadies, C-axis with “live” tools, chip conveyor, boring bar attachments, independent 4-way bed, etc.
TUR930MN Oil Country Manual Plus CNC TRI-V Lathes 8.6" BORE TUR930MN-OC
12.5" BORE TUR930MN-OC
37.4" 24.8" 78", 118", 157", 195", 236", 315", 393" (2-10m) 2,200 lbs 8,800 lbs
37.4" 24.8" 78", 118", 157", 195", 236", 315" (2-8m) 2,200 lbs 8,800 lbs
8.6" A2-15 4-700 RPM 30 HP Continuous / 45 HP at 40% Duty 40 HP Continuous / 50 HP at 40% Duty
12.5" A2-20 4-500 RPM 30 HP Continuous / 45 HP at 40% Duty 40 HP Continuous / 50 HP at 40% Duty
22.4" 235 IPM 3,300 lbs f (15 kN) 4,400 lbs f (20 kN) 2.5" (63mm) 1.6" (40mm) 31.9" 13" / 14" x 41.3" Standard VDI 50 Optional C-Axis, Live Tools, 4-Way, Y-Axis
22.4" 235 IPM 3,300 lbs f (15 kN) 4,400 lbs f (20 kN) 2.5" (63mm) 1.6" (40mm) 31.9" 13" / 14" x 41.3" Standard VDI 50 Optional C-Axis, Live Tools, 4-Way, Y-Axis
4.9" 6.3" MT6 11.8"
4.9" 6.3" MT6 11.8"
24.5" with extra heavy duty V-ways (48") bc + 96" 118" 95" 21,600 lbs 2,200 lbs
24.5" with extra heavy duty V-ways (48") bc + 96" 118" 95" 22,200 lbs 2,200 lbs
Capacity / Model Swing Over Bed Swing Over Cross Slide Distance Between Centers Max. Workpiece Weight in Chuck Max. Workpiece Weight bc Headstock Spindle Bore Spindle Nose Spindle Speed, 2-Range with CSS Main Drive Power, Siemens Main Drive Power, Optional Carriage Cross Slide Travel, X-axis Rapid Travels, Z and X axes Feed Force Cross, X-axis Feed Force Longitudinal, Z-axis Ball Screw Diameter, Z-axis, 78" - 236" bc Ball Screw Diameter, X-axis Carriage Length Bearing on Ways Cross Slide Width / Bridge x Length T-Slot Riser for Toolpost, Std. Automatic Toolturret 8-pos Disc Type Turret Options Tailstock Quill Diameter, Std. Quill Diameter, Option Quill Taper, Morse Taper Quill Travel General TRI-V Bed, width (Optional independent 4-way bed ) Machine Length Machine Width Machine Height Machine Weight, 118" bc Machine Weight, for each additional 40" bc, ADD
Extra heavy-duty headstock, spindle and bearings
www.toolmex.com
Extra Large Bore Series Spindle Nose Spindle Speed, 2-Range with CSS
14.2" BORE TUR1100MN-OC
17.7" BORE TUR1100MN-OC
A2-28 Front (Rear Nose Optional) 3-350 RPM 3-300 RPM
2015 S. Mitchell Blvd., Schaumburg, IL 60193 +1-847-301-3700 • 800-992-4766 • Fax +1-847-301-3703 Scan and Explore
Distributed by
©2012 Toolmex Industrial Solutions. All rights reserved. All specifications on this sheet are subject to change without notice. Photos shown are a general representation of the various models and may include some optional equipment. Toolmex Industrial Solutions, Elektrim, and Elektrimax are trademarks of Toolmex Corporation, Inc. 4-999-7002 2-12 2.0