Rev 2-1
110E
Powder Coated Finish
FORD FOCUS 2 ESTATE 2005-2011 e11*94/20*6438*00
Components Code
Quantity
CB
1
Crossbar
F
1
LP
1
RP BS
Bolt Kit
Description
Code
Quantity
WA
4
10mm Large Round Washers
Flange Neck
D
2
16x50 Set Screws, Nuts & Grip Washers
Left Plate
A
4
12x35 set screws, Nuts & Grip Washers
1
Right Plate
B
4
10mm Nuts & Grip Washers
2
Captive Bolt Straps
C
2
12x90 Bolts, Nuts & Grip Washers
w840
Description
1. Remove bumper (1 nut each side behind wheel arch liners). 2 fixings on bottom and 2 fixings on top of bumper ). 2. Remove bumper crash beam. 3. Insert captive bolt straps BS into the holes on the outside face of chassis rails and loosely attach side plates LP & RP using nuts B with washers WA. 4. Refit bumper crash beam and the bumper. 5. Attach crossbar CB to the side plates LP & RP using bolts A. 6. Attach flange neck F to crossbar CB using bolts C. 7. Attach type approved towball (not supplied) using set screws D. 8. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
110E
Powder Coated Finish
FORD FOCUS II ESTATE
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com