Rev 2:1
124E
VOLKSWAGEN AMAROK 2011(With Factory Step)
Powder Coated Finish
E11 55R-0110094 Components
Code
Quantity
Description
Bolt Kit Code
Quantity
w716
Description
LP
1
Left Plate
G
2
16x50 Set Screws, Nuts & Grip Washers
RP
1
Right Plate
B
4
12x40 x1.5 Pitch Set Screws & Grip Washers
F
1
Flange Neck
A
2
12x110 Bolts, Nuts & Grip Washers
1. Clean out the four threaded holes in the lower face of the bumper. 2. Loosely attach plates LP & RP to the threaded holes in the lower face of the bumper using set screws B with washers WA. 3. Insert flange neck F between plates LP & RP & attach using bolts A. 4. Attach type approved towball (not supplied) using set screws G. 5. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com