Rev 2:1
126E 126ED
Powder Coated Finish
VAUXHALL MERIVA 2010e11*94/20*8273*00
w761
Components
Mainframe
Description
Bolt Kit
Code
Quantity
Code
Quantity
CB
1
Crossbar
WB
8
10mm Large Round Washers
Description
SA
2
Side Angles
WA
6
12mm Large Round Washers
B
6
10x40 Bolts, Nuts & Grip Washers
G
4
12x35 Bolts & Grip Washers
C
2
12mm Nuts & Grip Washers
E
2
10mm Nuts & Grip Washers
(Neck Type) Detachable 'D'
Please See Detachable Neck Box Contents List
Please See Detachable Neck Box Contents List
Flange Neck 'F'
Please See Flange Neck Box Contents List
Please See Flange Neck Box Contents List
1. Remove bumper (3 fixings in each wheel arch). Remove panels inside boot (puncture accessories etc.). Remove rear light clusters, 2 plastic nuts. Unclip bumper at top and along edges then remove. 2. Remove impact beam (return to customer for refitting if towbar is removed). 3. Insert side angles SA into the chassis rails and loosely attach using bolts G with washers WA. 4. Loosely attach mainframe CB to the rear panel using nuts E with washers WB and bolts B with washers WB. 5. Attach side angles SA to the mainframe CB using nuts C and washers WA. Detachable Neck: Attach to crossbar CB using set screws Z. Flange Neck: Attach to crossbar CB using bolts A. Attach type approved towball (not supplied) using set screws H. 6. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing. 7. Refit bumper ensuring top of bumper is clipped in correctly.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
126E 126ED
Powder Coated Finish
VAUXHALL MERIVA
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
126E
FLANGE NECK
Powder Coated Finish
Components Code
Quantity
F
1
Bolt Kit
Description Flange Neck
Code
Quantity
A
2
12x100 Bolts, Nuts & Grip Washers
H
2
16x50 Set Screws, Nuts & Grip Washers
w493
Description
1. Loosely attach flange neck F using bolts A. 2. Loosely attach type approved towball (not supplied) using set screws H. 3. Tighten all fixings using a calibrated torque tool to the torque settings specified on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com