Rev 2:5
136E 136ES 136ED
FORD B Max 2012-
Powder Coated Finish
E11 55R — 0110414
w540
Components
Mainframe
Code
Quantity
CB
1
Crossbar
Description
RS
1
LS
1
RB
1
LB
1
Bolt Kit Code
Quantity
WA
4
10mm Large Round Washers
Description
Right Straps
WB
6
8mm Large Round Washers
Left Straps
WC
4
12mm Small Washers
Right Bracket
B
2
12x40 Set Screws, Nuts & Grip Washers
Left Bracket
C
2
12x40 Set Screws & Grip Washers
E
4
10x40 Set Screws & Grip Washers
H
6
8mm Nuts & Grip Washers
(Neck Type) Detachable 'D'
Please See Detachable Neck Box Contents List
Please See Detachable Neck Box Contents List
Swan Neck 'S'
Please See Swan Neck Box Contents List
Please See Swan Neck Box Contents List
Flange Neck 'F'
Please See Flange Neck Box Contents List
Please See Flange Neck Box Contents List
1. Remove bumper, 4 fixings around boot opening, 6 fixings along lower edge and 2 fixings in each wheel arch, remove rear tail lights when unclipping bumper. 2. Remove bumper impact beam. 3. Insert straps LS and RS into chassis rails and loosely attach using set screws E with washers WA (to gain better access to mounting point on LS please release fixings securing fuel filler pipe). 4. Loosely attach brackets RB and LB to the chassis rear panel using nuts H with washers WB. 5. Loosely attach crossbar CB between straps LS and RS, brackets LB and RB using set screws B and C using washers WC. 6. Ensuring all components are square and level, tighten all set screws and nuts. 7. Re-fit bumper. Detachable Neck: Attach to crossbar CB using set screws Z.
Swan Neck: Attach with CP10 plates(standard orientation) using set screws Y & bolts W. Flange Neck: Attach to crossbar CB using bolts A. Attach type approved towball (not supplied) using set screws G. 8. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing. PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com