Rev 2:1
137E 137ED
Powder Coated Finish
HYUNDAI H1, i800, Iload 2008e11*94/20*9603*00
w1381
Components
Mainframe
Description
Bolt Kit
Code
Quantity
Code
Quantity
CB
1
Crossbar
WA
12
12mm Large Round Washer
Description
LSP
1
Left Side Plate
B
4
12x30x1.25 Set Screws & Grip Washers
RSP
1
Right Side Plate
C
8
12x35 Set Screws, Nuts & Grip Washers
AN
2
Angle
E
4
12x120 Bolts, Nuts & Grip Washers
(Neck Type) Detachable 'D'
Please See Detachable Neck Box Contents List
Please See Detachable Neck Box Contents List
Swan Neck 'S'
Please See Swan Neck Box Contents List
Please See Swan Neck Box Contents List
Flange Neck 'F'
Please See Flange Neck Box Contents List
Please See Flange Neck Box Contents List
1. Lower spare wheel. 2. Clean out the threaded points on the chassis rails. 3. Loosely attach side plates LSP and RSP to the chassis rails using bolts E with washers WA. 4. Loosely attach angles AN to the threaded points on chassis rails using set screws B with washers WA. Loosely attach angles AN to side plates using set screws C. 5. Loosely attach crossbar CB to side plates using set screws C. 6. Tighten and check all fixings. 7. Detachable Neck : Loosely Attach detachable neck D using set screws Z. 8. Flange Neck : Loosely attach flange neck F using bolts A. 9. Loosely attach type approved towball (not supplied) using set screws G. 10. Check & tighten all fixings using a calibrated torque tool to the specified torque settings on the towbar drawing. 11. Refit spare wheel.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
137E 137ED
Powder Coated Finish
HYUNDAI H1 VAN, i800 & ILOAD e11*94/20*9603*00
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
137E
FLANGE NECK
Powder Coated Finish
Components Code
Quantity
F
1
Bolt Kit
Description Flange Neck
Code
Quantity
A
2
12x100 Bolts, Nuts & Grip Washers
G
2
16x50 Set Screws, Nuts & Grip Washers
w493
Description
1. Loosely attach flange neck F using bolts A. 2. Loosely attach type approved towball (not supplied) using set screws G. 3. Tighten all fixings using a calibrated torque tool to the torque settings specified on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com