Rev 2:1
140E
FLANGE NECK
Powder Coated Finish
Components Code
Quantity
F
1
Bolt Kit
Description Flange Neck
Code
Quantity
A
2
12x100 Bolts, Nuts & Grip Washers
G
2
16x50 Set Screws, Nuts & Grip Washers
w493
Description
1. Loosely attach flange neck F using bolts A. 2. Loosely attach type approved towball (not supplied) using set screws G. 3. Tighten all fixings using a calibrated torque tool to the torque settings specified on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
140E 140ED 140ES
Powder Coated Finish
KIA C’EED HATCHBACK & SW ESTATE 2007-2012 HYUNDAI i30 2007-2012 5 Door Hatchback 2007-2012 KIA PRO_CEE’D (Exc C’eed 3 &4) e11*94/20*7904*01 w733
Components Code Mainframe
Quantity
Description
Bolt Kit Code
Quantity
Description
CB
1
Crossbar
WB
3
12mm Small Round Washers
LP
1
Left Plate
WA
5
10mm Large Round Washers
LA
1
Left Angle
WC
1
10mm Small Round Washer
RP
1
Right Plate
C
6
10x40x1.25mm Bolts & Grip Washers
RA
1
Right Angle
B
7
12x35 Bolts, Nuts & Grip Washers
(Neck Type) Detachable 'D'
Please See Detachable Neck Box Contents List
Please See Detachable Neck Box Contents List
Swan Neck 'S'
Please See Swan Neck Box Contents List
Please See Swan Neck Box Contents List
Flange Neck 'F'
Please See Flange Neck Box Contents List
Please See Flange Neck Box Contents List
1. Clean out all threaded points. (Three on each chassis rail: two on the side and one on bottom). 2. Loosely attach left plate LP to the threaded points on the outside of the chassis using bolts C with washers WA. 3. Loosely attach left angle LA to the chassis using bolts C and washer WC and attach to left plate LP using fasteners B and washers WB. 4. Loosely attach right angle RA to the threaded points on the outside of the chassis using fasteners C and washers WA. 5. Loosely attach right plate RP to right angle using fasteners B with washers WB. 6. Loosely attach mainframe CB to left plate LP and to right plate RP using fasteners B. Detachable Neck: Atttach to crossbar CB using set screws Z. Swan Neck: Attach to crossbar CB with plates IP using fasteners A. Flange Neck: Attach to crossbar CB using bolts A. Attach type approved towball (not supplied) using fasteners G. 7. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
140E 140ED 140ES
Powder Coated Finish
KIA C’EED HATCHBACK & SW ESTATE 2007-2012 HYUNDAI i30 2007-2012 5 Door Hatchback 2007-2012 KIA PRO_CEE’D (Exc C’eed 3 &4)
VOLKSWAGEN PASSAT SALOON/ ESTATE 2014-
Bolt Torque Settings Bolt Size (mm)
Pitch Torque Setting (mm) (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com