Rev 2:1
143E
MERCEDES Sprinter Van 1995— May 2006 (Exc SWB with step & twin rear wheel) VW LT VAN 1996-2006
Powder Coated Finish
Components Code
Quantity
CB
1
SP
2
SA
2
SR
2
Description
Bolt Kit Code
Quantity
Crossbar
WA
8
12mm Large Round Washers
Side Plates
WB
8
10mm Small Round Washers
Side Angles
A
2
16x50 Bolts, Nuts & Grip Washers
Spacers
B
4
10x40 Bolts, Nuts & Grip Washers
C
4
12x30 Bolts, Nuts & Grip Washers
D
8
12x90 Bolts, Nuts & Grip Washers
E
4
10x30 Bolts & Grip Washers
SW
8
12mm Small Spacer Blocks
w2122
Description
1. On these models: 208d - remove towing eye and discard. 308d and 312d - remove bolts securing step. 2. Loosely attach side plates SP to the chassis using bolts D with washers WA and spacers SW (for vans with step only) between the chassis and side plates SP and washers WB under the bolt heads. 3. Loosely attach crossbar CB to side plates SP using bolts C. 4. Loosely attach side angles SA to crossbar CB using bolts B, washers WB and spacers SP (see diagrams for relevant positions). Attach side angles SA to chassis using bolts E and washers WB. (note: on models 308d and 312d the step mountings are sandwiched between side angles SA and the chassis.) 5. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing. SWB WITHOUT STEP
MWB & LWB WITHOUT STEP
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com