Rev 2:4
145E 145ES 145ED
MITSUBISHI ASX
Powder Coated Finish
(Inc Facelift 2012-) e11*94/20*9753*00
w1105
Components Code Mainframe
Quantity
Description
Bolt Kit Code
Quantity
Description
CB
1
Crossbar
WA
8
10mm Small Round Washers
LP
1
Left Plate
WB
8
12mm Small Round Washers
RP
1
Right Plate
C
6
10x30x1.25 Set Screws & Grip Washers
AN
2
Angles
E
2
10x40x1.25 Set Screws & Grip Washers
H
4
12x35 Set Screws, Nuts & Grip Washers
B
4
12x110 Bolts, Nuts & Grip Washers
(Neck Type) Detachable 'D'
Please See Detachable Neck Box Contents List
Please See Detachable Neck Box Contents List
Swan Neck 'S'
Please See Swan Neck Box Contents List
Please See Swan Neck Box Contents List
Flange Neck 'F'
Please See Flange Neck Box Contents List
Please See Flange Neck Box Contents List
1. Lower rear exhaust silencer. Remove and hand to customer the towing eye from the left hand chassis rail. Clean out all threaded mounting points on the chassis rails. 2. On models 2013 onwards cut bumper as shown in diagram. 3. Loosely attach crossbar CB to chassis rails using bolts B with washers WB. 4. Loosely attach plates LP and RP to the chassis rails using set screws C with washers WA. 5. Loosely attach angles AN to the chassis rails as shown in diagram using set screws E & C with washers WA. 6. Attach crossbar CB to plates using set screws H. Detachable Neck: Attach to crossbar CB using set screws Z. Flange Neck:
Attach to crossbar CB using bolts A. Attach type approved towball (not supplied) using set screws G.
Swan Neck: Attach to crossbar CB with IP plates using bolts A. 7. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com