Rev 2:1
156E
FORD TRANSIT VAN TOURNEO & MINIBUS
Powder Coated Finish
e11*94/20*6538*00 Components
Code
Quantity
Description
CB
1
Crossbar
LP
1
RP
1
SP
1
Bolt Kit Code
Quantity
WA
8
12mm Large Round Washers
Left Plate
G
2
16x50 Set Screws, Nuts & Grip Washers
Right Plate
B
4
12x35 Set Screws, Nuts & Grip Washers
Spacer Plate
A
6
12x100 Bolts, Nuts & Grip Washers
BC12
4
12mm Bolt Covers
w1345
Description
1. Remove the spare wheel. 2. Remove the bumper mounting bolts from the chassis rails and discard. Remove the steel step where fitted and give to the customer. 3. Loosely attach plates LP and RP to the front hole only on the chassis rails using bolt A with washer WA and another washer WA between the plate and chassis (see diagram). Fit the remaining bolts A with washers WA as shown. 4. Attach crossbar CB to plates LP and RP using bolts B. (When fitting to a vehicle with a plastic moulded step use the front 2 holes on the crossbar arms). 5. Attach type approved towball using set screws G with spacer plate SP. 6. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
156E
Powder Coated Finish
FORD TRANSIT VAN TOURNEO & MINIBUS
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com