Rev 2:1
158E 158ED
Powder Coated Finish
PEUGEOT 308SW 2007-2013 E11 55R-0110063
w357
Components
Mainframe
Code
Quantity
CB
1
Crossbar
Description
ST
2
Straps
Bolt Kit Code
Quantity
B
4
8x40 Set Screws & Grip Washers
Description
WA
6
8mm Large Round Washers
C
4
12x35 Set Screws, Grip Washers & 2 Nuts
NT
2
8mm Nuts & Grip Washers
(Neck Type) Detachable 'D'
Please See Detachable Neck Box Contents List
Please See Detachable Neck Box Contents List
Flange Neck 'F'
Please See Flange Neck Box Contents List
Please See Flange Neck Box Contents List
1. Remove 2 bolts securing the bottom bumper tags to the vehicle body. 2. Remove and retain 3 plastic fixings securing the corner dirt shields to the bumper. 3. Remove the 2 lower bolts from each side of the impact beam. 4. Lower the rear silencer from the chassis to gain extra clearance if necessary. 5. Loosely attach crossbar CB to the lower fixing points of the impact beam using set screws B with washers WA. 6. Loosely attach straps ST to the threaded studs on the chassis rails using nuts NT with washers WA. 7. Loosely attach straps ST to crossbar CB using set screws C. Detachable Neck: Attach to crossbar CB using set screws Z. Flange Neck: Attach to crossbar CB using bolts A & type approved towball (not supllied) using set screws G. 8. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing. 9. Re attach corner dirt shields, silencer & bumper tags.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
158E 158ED
Powder Coated Finish
PEUGEOT 308SW
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
158E
FLANGE NECK
Powder Coated Finish
Components Code
Quantity
F
1
Bolt Kit
Description Flange Neck
Code
Quantity
A
2
12x100 Bolts, Nuts & Grip Washers
G
2
16x50 Set Screws, Nuts & Grip Washers
w493
Description
1. Loosely attach flange neck F using bolts A. 2. Loosely attach type approved towball (not supplied) using set screws G. 3. Tighten all fixings using a calibrated torque tool to the torque settings specified on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com