Rev 2:1
164E
FLANGE NECK
Powder Coated Finish
Components Code
Quantity
F
1
Bolt Kit
Description
Flange Neck
Code
Quantity
A E
2 2
w493
Description
12x100 Bolts,Nuts & Grip Washers 16x50 Set Screws, Nuts & Grip Washers
1. Loosely attach flange neck F using bolts A. 2. Loosely attach type approved towball (not supplied) using set screws E. 3. Tighten all fixings using a calibrated torque tool to the torque settings specified on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
164E 164ED 164ES
Powder Coated Finish
HONDA CRV Jan 2007—2012 e11*94/20*7008*01
w1475
Components Code
Quantity
CB
1
Crossbar
WA
8
LP
1
Left Plate
C
1
16x100 Bolt, Nut & Grip Washers
RP
1
Right Plate
G
8
10x 1.25x40 set screws & Grip Washers
Mainframe
Description
Bolt Kit Code Quantity
Description 10mm Large Round Washers
B
4
12x35 Bolts, Grip Washers & 2 Nuts
SP
2
Spacer Plates
BC12
4
12mm Bolt Cover
BC16
2
16mm Bolt Cover
(Neck Type) Detachable 'D'
Please See Detachable Neck Box Contents List
Please See Detachable Neck Box Contents List
Swan Neck 'S'
Please See Swan Neck Box Contents List
Please See Swan Neck Box Contents List
Flange Neck 'F'
Please See Flange Neck Box Contents List
Please See Flange Neck Box Contents List
1.Remove under tray (2 plastic fixings on lower edge, 3 bolts in recesses, 1 screw in left wheel arch). Note: It is not necessary to refit the tray. 2. Lower exhaust. 3. Clean out threaded points in the chassis rails. Loosely attach side plates LP and RP to the threaded holes in the chassis rails using fasteners G with washers WA. 4. Loosely attach crossbar CB to side plates LP and RP using fasteners B. 5. Loosely attach crossbar CB to the vehicle’s towing eye using bolt C with spacers SP. Detachable Neck: Attach to crossbar CB using set screws Z. Swan Neck: Attach to crossbar CB using fasteners A. Flange Neck: Attach to crossbar CB using bolts A then attach towball (not supplied) using set screws E. 6. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing and replace exhaust.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
164E 164ED 164ES
Powder Coated Finish
HONDA CRV
Bolt Torque Settings Bolt Size (mm)
Pitch Torque Setting (mm) (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com