Rev 2:1
169E
FLANGE NECK
Powder Coated Finish
Components Code
Quantity
F
1
Bolt Kit
Description
Flange Neck
Code
Quantity
A G
2 2
w493
Description
12x100 Bolts, Nuts & Grip Washers 16x50 Set Screws, Nuts & Grip Washers
1. Loosely attach flange neck F using bolts A. 2. Loosely attach type approved towball (not supplied) using set screws G. 3. Tighten all fixings using a calibrated torque tool to the torque settings specified on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:2
169E 169ED 169ES
Powder Coated Finish
DACIA DUSTER 2012E11 55R-0110130 w751
Components
Mainframe
Code
Quantity
CB
1
Crossbar
Description
SP
2
CP
2
Bolt Kit Code
Quantity
WA
4
10mm Large Round Washers
Description
Side Plates
C
4
10x90 Bolts & Grip Washers
Captive Plates
B
4
12x35 Set Screws, Nuts & Grip Washers
BU
4
58x19mm Diameter Bushes
(Neck Type) Detachable 'D'
Please See Detachable Neck Box Contents List
Please See Detachable Neck Box Contents List
Swan Neck 'S'
Please See Swan Neck Box Contents List
Please See Swan Neck Box Contents List
Flange Neck 'F'
Please See Flange Neck Box Contents List
Please See Flange Neck Box Contents List
1.
Remove spare wheel if fitted.
2.
Remove heat shield and lower exhaust.
3.
Remove mastic & tape covering the mounting points on the chassis rails under the vehicle.
4.
Remove the 4 grommets from the chassis rails inside the boot.
5.
Loosely attach side plates SP to the chassis rails using bolts C with bushes BU & captive plates CP inside the boot.
6.
Cut bumper as shown in diagram.
7.
Loosely attach crossbar CB to side plates SP using set screws B.
Detachable Neck: Attach to crossbar CB using set screws Z. Swan Neck: Attach to crossbar CB using CPE10 plates (Standard Orientation) with set screws Y & bolts W. Flange Neck: Attach to crossbar CB using bolts A & type approved towball (not supplied) using set screws G. 8.
Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
9.
Refit heat shield, exhaust & spare wheel if removed.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
169E 169ED 169ES
Powder Coated Finish
DACIA DUSTER 2012-
Bolt Torque Settings Bolt Size (mm)
Pitch Torque Setting (mm) (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com