Rev 2:1
173E
FLANGE NECK
Powder Coated Finish
Components Code
Quantity
F
1
Bolt Kit
Description
Flange Neck
Code
Quantity
A G
2 2
w493
Description
12x100 Bolts, Nuts & Grip Washers 16x50 Set Screws, Nuts & Grip Washers
1. Loosely attach flange neck F using bolts A. 2. Loosely attach type approved towball (not supplied) using set screws G. 3. Tighten all fixings using a calibrated torque tool to the torque settings specified on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:3
173E 173ED 173ES
Powder Coated Finish
CITROEN Berlingo (SWB) & Multispace (SWB) 2008PEUGEOT Partner L1 (SWB) & Tepee 2008(Exc First Model) E11 55R-019971 w639
Components Code Mainframe
Quantity
Bolt Kit
Description
Code
Quantity
Description
CB
1
Crossbar
WA
2
12mm Large Round Washers
STL
1
Strap Left
WB
6
12mm Small Round Washers
STR
1
Strap Right
WC
4
10mm Small Round Washers
ANG
2
Angle
B
2
12x50 Set Screws & Grip Washers
C
6
12x35 Set Screws, Nuts & Grip Washers
NT
4
10mm Nuts & Grip Washers
(Neck Type) Detachable 'D'
Please See Detachable Neck Box Contents List
Please See Detachable Neck Box Contents List
Swan Neck 'S'
Please See Swan Neck Box Contents List
Please See Swan Neck Box Contents List
Flange Neck 'F'
Please See Flange Neck Box Contents List
Please See Flange Neck Box Contents List
1. Remove and retain fixings from lower corners of bumper for easier access. 2. Remove the lowest fixing bolt from the impact beam on either side. 3. Insert crossbar CB up inside the bumper & loosely attach to the lowest points of the impact beam using set screws B with washers WA. 4. Loosely attach angles ANG to the threaded studs on the chassis rails using nuts NT with washers WC. 5. Loosely attach straps STL & STR on short wheelbase models (L1) or straps STL & STR (PT612S supplied separately) on long wheelbase models (L2) to angles ANG and to crossbar CB using set screws C with washers WB. Detachable Neck: Attach to crossbar CB using set screws Z. Swan Neck: Attach to crossbar CB with CPE10 plates (standard orientation) using set screws Y & bolts W. Flange Neck: Attach to crossbar CB using set screws A. Attach type approved towball using set screws G. 6. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing. 7. Refit fixings from lower corners of bumper.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
173E 173ED 173ES
Powder Coated Finish
CITROEN Berlingo (SWB) & Multispace (SWB) 2008PEUGEOT Partner L1 (SWB) & Tepee 2008(Exc First Model)
VOLKSWAGEN PASSAT SALOON/ ESTATE 2014-
Bolt Torque Settings Bolt Size (mm)
Pitch Torque Setting (mm) (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com