Rev 2:1
174E 174ED 174ES
FORD KUGA 2008-
Powder Coated Finish
(Inc Facelift 2016-) E1155R-019976 w710
Components Code Mainframe
Quantity
Description
Bolt Kit Code
Quantity
Description
CB
1
Crossbar
WA
10
12mm Large Round Washers
RS
1
Right Strap
C
4
12x35 Set Screws & Grip Washers
LS
1
Left Strap
B
4
12x40 Set Screws, Nuts & Grip Washers
E
2
12x40 Set Screws & Grip Washers
(Neck Type) Detachable 'D'
Please See Detachable Neck Box Contents List
Please See Detachable Neck Box Contents List
Swan Neck 'S'
Please See Swan Neck Box Contents List
Please See Swan Neck Box Contents List
Flange Neck 'F'
Please See Flange Neck Box Contents List
Please See Flange Neck Box Contents List
1. Models from 2013— Remove rear lights. 2. Remove bumper: Models 2008-2012: Screws inside wheel arches, fold back arch liners to reveal extra fixings, screws on lower edge and top edge. Models 2013-: Remove plastic fixings inside arches, pull arch surrounds away from body to reveal tip screws. Remove fixings on lower edge and screws on top edges. Models 2016–: Extra fixings on lower edge of bumper to heat shield, unclip bumper tips away from the vehicle body and unclip any attached wiring. 3. Remove impact beam and towing eye. (Towing eye can be refitted to models 2008-2012). 4. Loosley attach straps LS and RS to the inside of the chassis rails using set screws C and washers WA. 5. Loosley attach crossbar CB to straps LS and RS using set screws B and E using washers WA 6. 2016– Models: Cut heat shield. (See diagram on towbar drawing). 7. Refit bumper and wiring. 8. Tighten all fixings with a calibrated torque tool to the specified torque settings on the towbar drawing. Detachable Neck: Attach to crossbar CB using set screws Z. Swan Neck: Attach to crossbar CB using plates CPE10 (Standard Orientation) with set screws Y and bolts W. Flange Neck: Attach to crossbar CB using bolts A. Attach type approved towball (not supplied) using set screws G.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
174E 174ED 174ES
FORD KUGA 2008-
Powder Coated Finish
(Inc Facelift 2016-)
VOLKSWAGEN PASSAT SALOON/ ESTATE 2014-
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
174E
FLANGE NECK
Powder Coated Finish
Components Code
Quantity
F
1
Bolt Kit
Description
Flange Neck
Code
Quantity
A G
2 2
w493
Description
12x100 Bolts, Nuts & Grip Washers 16x50 Set Screws, Nuts & Grip Washers
1. Loosely attach flange neck F using bolts A. 2. Loosely attach type approved towball (not supplied) using set screws G. 3. Tighten all fixings using a calibrated torque tool to the torque settings specified on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com