Rev 2:1
184E 184ED
Powder Coated Finish
VOLKSWAGEN CADDY & MAXI & LIFE 2008E11 55R-0110134
w429
Components
Mainframe
Code
Quantity
CB
1
LB RB
Description
Bolt Kit Code
Quantity
Description
Crossbar
WA
4
10mm Large Round Washers
1
Left Bracket
B
4
12x40 Set Screws, Grip Washers & 2 Nuts
1
Right Bracket
C
4
10x40 Set Screws & Grip Washers
(Neck Type) Detachable 'D'
Please See Detachable Neck Box Contents List
Please See Detachable Neck Box Contents List
Flange Neck 'F'
Please See Flange Neck Box Contents List
Please See Flange Neck Box Contents List
1. Remove bumper — 7 nuts, 3 nearside, 4 offside (uppermost hidden behind rubber bung) that secure crush beam, 2 torque screws in wheel arches, unclip bumper tips and remove. 2. Remove crush beam from inside the bumper (2 torque screws). 3. Insert LB and RB inside chassis rails and loosely attach using set screws C and washers WA. 4. Loosely attach crossbar CB to brackets LB and RB using set screws B. Tighten set screws C. 5. Re attach bumper and tighten set screws B. Detachable Neck: Attach using bolts Z. Flange Neck: Attach using bolts A and type approved towball (not supplied) using set screw G. 6. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 1:2
184E 184ED
Powder Coated Finish
VW CADDY & MAXI & LIFE 2008E11 55R-0110134
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
184E
FLANGE NECK
Powder Coated Finish
Components Code
Quantity
F
1
Bolt Kit
Description Flange Neck
Code
Quantity
A
2
12x100 Bolts, Nuts & Grip Washers
G
2
16x50 Set Screws, Nuts & Grip Washers
w493
Description
1. Loosely attach flange neck F using bolts A. 2. Loosely attach type approved towball (not supplied) using set screws G. 3. Tighten all fixings using a calibrated torque tool to the torque settings specified on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com