Rev 2:1
195E
FLANGE NECK
Powder Coated Finish
Components Code
Quantity
F
1
Bolt Kit
Description Flange Neck
Code
Quantity
A
2
12x100 Bolts, Nuts & Grip Washers
E
2
16x50 Set Screws, Nuts & Grip Washers
w493
Description
1. Loosely attach flange neck F using bolts A. 2. Loosely attach type approved towball (not supplied) using set screws E. 3. Tighten all fixings using a calibrated torque tool to the torque settings specified on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:3
195E 195ED 195ES
VAUXHALL ANTARA 2007-
Powder Coated Finish
(Inc Facelift 2011-) e11*94/20*8350*00
w907
Components Code Mainframe
Quantity
Description
Bolt Kit Code
Quantity
Description
CB
1
Crossbar
WA
8
12mm Large Round Washers
LP
1
Left Side Plate
C
4
12x40 Set Screws & Grip Washers
RP
1
Right Side Plate
G
2
12x40 Set Screws, Nuts & Grip Washers
B
6
12x70 Bolts & Grip Washers
(Neck Type) Detachable 'D'
Please See Detachable Neck Box Contents List
Please See Detachable Neck Box Contents List
Swan Neck 'S'
Please See Swan Neck Box Contents List
Please See Swan Neck Box Contents List
Flange Neck 'F'
Please See Flange Neck Box Contents List
Please See Flange Neck Box Contents List
1. Remove towing eye from the left hand chassis rail (this will not be refitted). 2. Locate the 4 threaded points on each chassis rail (1 on the bottom face and 3 on the inside face) and clean out with a 12mm x 1.75 pitch tap. 3. Loosely attach side plate LP to the left hand chassis rail using set screw C with washers WA on the bottom face and bolts B with washers WA on the inside face. Repeat the operation with side plate RP on the right hand chassis rail. 4. Loosely attach crossbar CB to side plates LP and RP using set screws C and G. Detachable Neck: Attach detachable neck D to crossbar CB using set screws Z. Swan Neck: Attach swan neck SN to crossbar CB with IP plates using fasteners A. Flange Neck: Attach flange neck F to crossbar CB using bolts A. Attach type approved towball (not supplied) using set screws E.
5. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
195E 195ED 195ES
Powder Coated Finish
VAUXHALL ANTARA (Inc Facelift)
Bolt Torque Settings Bolt Size (mm)
Pitch Torque Setting (mm) (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com