Rev 2:1
213E
Powder Coated Finish
VAUXHALL VECTRA SALOON & HATCHBACK July 2002–Dec 2008 e11*94/20*4522*00
Components Code
Quantity
CB
1
Crossbar
PL
2
CP
2
Bolt Kit
Description
Code
Quantity
WA
16
10mm Large Round Washers
Plate
A
2
16x50 Set Screws, Nuts & Grip Washers
Captive Plates
B
4
10x40 Set Screws & Grip Washers
C
4
10x110 Bolts, Nuts & Grip Washers
BU
4
63x19 Bush
SP
4
30x8x65 Spacer Block
w1699
Description
1.Remove the boot floor covering, rear panel and the two side panels. 2.Locate the dimples provided in the boot floor and rear panel. Removal of any mastic compound may be required to reveal dimples and ensure correct seating of plates PL. 3.Drill out the dimples on the boot floor to accept bushes BU. 4.Insert bushes BU into the chassis and position spacers SP and plates PL over the bushes, insert bolts C with washers WA. Mark off rear panel and drill through 11mm taking care not to damage the bumper. Attach plates PL to the rear panel using set screws B with washers WA and captive plate CP, using other washers WA as spacers between plates PL and rear panel. 5.Remove the rearmost exhaust hangers and lower the exhaust. 6.Attach crossbar CB to bolts C with washers WA and nuts provided. 7.Attach type approved towball (not supplied) using set screws A. 8.Replace all trim. 9.Tighten fixings using a calibrated torque tool to the recommended torque settings on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
213E
Powder Coated Finish
VAUXHALL VECTRA SALOON & HATCHBACK
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com