Rev 2:1
214E
FLANGE NECK
Powder Coated Finish
Components Code
Quantity
F
1
Bolt Kit
Description Flange Neck
Code
Quantity
A
2
12x100 Bolts, Nuts & Grip Washers
G
2
16x50 Set Screws, Nuts & Grip Washers
w493
Description
1. Loosely attach flange neck F using bolts A. 2. Loosely attach type approved towball (not supplied) using set screws G. 3. Tighten all fixings using a calibrated torque tool to the torque settings specified on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
214E 214ED 214ES
SKODA FABIA SALOON (6Y) 2001-2007 SKODA FABIA HATCHBACK (6Y) 2000-2007 SKODA FABIA ESTATE (6Y) (Exc VRS) 2001-2007 VOLKSWAGEN POLO HATCHBACK 2002-2009 SEAT IBIZA 2001-2008 (All Exc VRS)
Powder Coated Finish
e11*94/20*5070*01
w213
Components
Mainframe
Code
Quantity
CB
1
Description Crossbar
Bolt Kit Code
Quantity
Description
WA
4
10mm Large Round Washers
B
4
10x35 Bolts & Grip Washers
(Neck Type) Detachable 'D'
Please See Detachable Neck Box Contents List
Please See Detachable Neck Box Contents List
Swan Neck 'S'
Please See Swan Neck Box Contents List
Please See Swan Neck Box Contents List
Flange Neck 'F'
Please See Flange Neck Box Contents List
Please See Flange Neck Box Contents List
1. Remove rear bumper: 1 torx screw under lower edge of bumper on each side, 4 torx screws around each wheel arch, 2 torx screws behind each light. Remove light units. Remove steel impact beam, 3 nuts each side. 2. Remove tape covering the holes in the chassis rails. Insert mainframe CB inside chassis rails and secure through mounting holes using bolts B with washers WA. 3. Cut bumper as shown in diagrams. Detachable Neck: Attach to crossbar CB using set screws Z. Swan Neck: Attach to crossbar CB with IP plates using bolts A. Flange Neck: Attach to crossbar CB using bolts A. 4. Attach type approved towball (not supplied) using set screws G. 5. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing. (NOTE: On VW Polo & Skoda Fabia models it may be necessary to trim section from the air vent surround).
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:3
214E 214ED 214ES
Powder Coated Finish
SKODA FABIA SALOON (6Y) 2001-2007 SKODA FABIA HATCHBACK (6Y) 2000-2007 SKODA FABIA ESTATE (6Y) (Exc VRS) 2001-2007 VOLKSWAGEN POLO HATCHBACK 2002-2009 SEAT IBIZA 2001-2008 (All Exc VRS)
Bolt Torque Settings Bolt Size (mm)
Pitch Torque Setting (mm) (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com