Rev 2:1
220E
FLANGE NECK
Powder Coated Finish
Components Code
Quantity
F
1
Bolt Kit
Description Flange Neck
Code
Quantity
A
2
12x100 Bolts, Nuts & Grip Washers
G
2
16x50 Set Screws, Nuts & Grip Washers
w493
Description
1. Loosely attach flange neck F using bolts A. 2. Loosely attach type approved towball (not supplied) using set screws G. 3. Tighten all fixings using a calibrated torque tool to the torque settings specified on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:3
220E 220ED 220ES
Powder Coated Finish
FORD TRANSIT CONNECT SWB/ LWB 2014GRAND TOURNEO CONNECT 2014TOURNEO CONNECT 2014e11 55R-0110307 w553
Components
Mainframe
Description
Bolt Kit
Code
Quantity
Code
Quantity
Description
CB
1
Crossbar
WA
8
10mm Large Round Washers
ST
2
Straps
WB
6
12mm Large Round Washers
B
4
12x35 Bolts & Grip Washers
C
2
12x40 Bolts, Nuts & Grip Washers
(Neck Type) Detachable 'D'
Please See Detachable Neck Box Contents List
Please See Detachable Neck Box Contents List
Swan Neck 'S'
Please See Swan Neck Box Contents List
Please See Swan Neck Box Contents List
Flange Neck 'F'
Please See Flange Neck Box Contents List
Please See Flange Neck Box Contents List
1.
Remove bumper, screws on top edge of bumper, unclip bumper from sides of vehicle starting at each corner.
2.
Remove impact beam, retain fixings.
3.
Loosen spare wheel to ease fitment.
4.
Insert straps ST inside the chassis rails and loosely attach using bolts B and washers WB.
5.
Loosely attach crossbar CB to rear panel using original fixings and washers WA.
6.
Loosely attach straps ST to crossbar CB using bolts B & C with washers WB.
7.
Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing, then Replace bumper.
Detachable Neck: Attach to crossbar CB using bolts Z. Swan Neck: Attach to crossbar CB with CPE10 plates (standard orientation) using set screws Y & bolts W. Flange Neck: Attach to crossbar CB using bolts A. Attach type approved towball (not supplied) to flange neck F using bolts G. 8. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
220E 220ED 220ES
Powder Coated Finish
FORD TRANSIT CONNECT SWB/ LWB 2014GRAND TOURNEO CONNECT 2014TOURNEO CONNECT 2014-
Bolt Torque Settings Bolt Size (mm)
Pitch Torque Setting (mm) (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com