Rev 2:1
226E
Powder Coated Finish
PEUGEOT 807 2002CITROEN C8 2003FIAT ULYSEE 2003-
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:2
226E
PEUGEOT 807 2002 - 2010 CITROEN C8 2003 - 2011 FIAT ULYSEE 2003 -
Powder Coated Finish
e11*94/20*5384*00 Components Code
Quantity
CB
1
Crossbar
CS
1
RS
1
LS AN
Bolt Kit
Description
Code
Quantity
SW
2
12mm Square Washers 50x50x3
Centre Strut
D
2
16x50 Bolts, Buts & Grip Washers
Right Strap
A
8
12x35 Bolts, Nuts & 6 Nuts
1
Left Strap
C
2
12x90 Bolts, Nuts & Grip Washers
2
Angles
B
2
10x30 Bolts & Grip Washers
CT
2
10mm Large Cage Nuts
CN
2
12mm Large Cage Nuts
w1203
Description
1. Remove spare wheel and exhaust heat shield. Insert cage nuts CN into the two rearmost mounting points (inside faces of chassis). Insert cage nuts CT into forward mounting points. Rear face of forward cross member and under side of left hand chassis rail. Note: left hand forward mounting point may have a captive nut fitted.) 2. Cut out the manufacturers hatched area inside bumper face. Loosely attach crossbar CB to mounting points on inside faces of chassis using bolts A and using square washers SW as spaces between crossbar and chassis if needed. Refit exhaust heat shield. 3. Loosely attach angles AN to forward mounting points using bolts B. Attach left strap LS to cross bar CB and to angle AN using bolts A. Attach right hand strap RS to crossbar CB and to angle AN using bolts A. 4. Attach centre strut CS to crossbar CB using bolts C. 5. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com