Rev 2:1
227a
Powder Coated Finish
HONDA CRV 2002 -
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
227a
HONDA CRV 2002—Dec 2006
Powder Coated Finish
e11*94/20*6406*00
Components Code
Quantity
Description
CB
1
Crossbar
CS
1
AN
1
SP
1
Bolt Kit Code
Quantity
WA
8
10mm Large Round Washers
Centre Strut
C
2
16x50 Bolts, Nuts & Grip Washers
Angle
A
8
10x90 Bolts, Nuts & Grip Washers
Side Plate
B
4
12x35 Bolts, Nuts & Grip Washers
D
2
12x90 Bolts, Nuts & Grip Washers
E
1
16x80 Bolt, Nut & Grip Washer
BU
8
67x19mm Bushes
PP
1
10mm Spacer
PP
1
8mm Spacer
w2349
Description
1. Lower the rear exhaust silencer. Remove the boot floor covering and trims and locate 4 dimples each side . Drill 11mm through the chassis rails and open up the top holes to accept bushes BU. 2. Loosely attach angle AN and side plate SP using bolts A with bushes BU and washers WA inside the boot. 3. Loosely attach crossbar CB to angle AN and side plate SP using bolts B. 4. Attach centre strut CS to crossbar CB using bolts D and to vehicle towing eye using bolt E with packing plates PP. 5. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com