Rev 2:1
233E
Powder Coated Finish
FORD TRANSIT CONNECT
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
233E
Powder Coated Finish
FORD TRANSIT CONNECT e11*94/20*9675*00
Components Code
Description
Quantity
Bolt Kit Code
Quantity
WA
4
12mm Large Round Washers
4
12x35 Bolts, Nuts & Grip Washers
w778
Description
CB
1
Crossbar
LP
1
Left Plate
B
RP
1
Right Plate
C
4
12x40 Bolts & Grip Washers
G
2
16x50 Bolts, Nuts & Grip Washers
BC12
4
12mm Bolt Covers
1. Lower spare wheel. Clean out captive threads inside the chassis rails using a suitable tool. Loosely attach plates RP and LP to the existing captive threads on the inboard face of the chassis using set screws C and washers WA. 2. Loosely attach crossbar CB to plates RP and LP using set screws B. 3. Ensuring crossbar is pushed up towards the bumper (for exhaust clearance) tighten bolts and replace spare wheel. 4. Attach type approved towball (not supplied) using set screws G. 5.Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com