Rev 2:1
241E
Powder Coated Finish
RENAULT CLIO SPORTS TOURER (X85) 2008-2013 e11*94/20*8295*00
Components Code
Quantity
Description
CB
1
Crossbar
SA
2
F
1
Bolt Kit Code
Quantity
WA
8
10mm Large Round Washers
Side Arms
A
2
12x90 Bolts, Nuts & Grip Washers
Flange Neck
B
6
12x40 Set Screws, Nuts & Grip Washers
C
4
10x100 Bolts, Nuts & Grip Washers
BR
2
22mm Diameter x 58mm Long Bushes
BL
2
22mm Diameter x 62mm Long Bushes
G
2
16x50 Set Screws, Nuts & Grip Washers
w1543
Description
1. Remove boot carpet to lower spare wheel, also at edges expose 2 fixing points on inside of each chassis rail, these may be covered. 2. To obtain access to the outside of the chassis rails, undo 2 arch lining clips on both sides and underside torque screws. Lower exhaust silencer to gain better access to left side arm. 3. Fold back arch liners and insert bolts C with washers WA using bushes BR on the right hand side and BL on the left. 4. Locate side arms SA over bolts C to the chassis, loosely tighten using nuts and remaining washers WA. 5. Loosely attach crossbar CB to side arms SA using set screws B. 6. Attach flange neck F to crossbar CB using bolts A. Attach type approved towball (not supplied) to flange neck F using set screws G. 7. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com