Rev 2:4
246ED 246E
RENAULT ESPACE & GRAND ESPACE Feb 2003-
Powder Coated Finish
E11*94/20*6099*01
w2336
Components
Mainframe
Description
Bolt Kit
Code
Quantity
Code
Quantity
CB
1
Crossbar
WA
12
14mm Large Round Washers
Description
SSA
1
Short Side Arms
B
6
14x50 Bolts, Nuts & Grip Washers
LSA
1
Long Side Arms
C
2
12x140 Bolts, Nuts & Grip Washers
BU
2
32x40mm Diameter Bushes
RSP
2
13x40mm Diameter Round Spacers
SP
2
12mm Square Spacers
E
2
12x160 Bolts
WB
2
12mm Large Round Washers
(Neck Type) Detachable 'D'
Please See Detachable Neck Box Contents List
Please See Detachable Neck Box Contents List
Flange Neck 'F'
Please See Flange Neck Box Contents List
Please See Flange Neck Box Contents List
ESPACE: 1. Lower the spare wheel. Remove the dirt guards from each side (rear of back wheels 2 screws) and lower the exhaust 2. Attach mainframe CB using bolts B with washers WA in place. 3. Remove rear wheels and attach side arms SSA to the chassis using bolts C (with bolt heads on the outside) and bushes BU in place between the chassis and side arms. Attach side arms SSA to the mainframe CB using bolts B and washers WA. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing. 4. Re-fit wheels, dirt guards and exhaust. Attach flange neck F or detachable neck D to the mainframe CB using bolts A or Z. Attach towball A50/1 (not supplied) using bolts G. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing. GRAND EPSACE: 1. Lower the spare wheel. Remove the dirt guards from each side (rear of back wheels 2 screws) and lower the exhaust. 2. Attach mainframe CB using bolts B with washers WA in place. 3. Remove rear wheels and attach long side arms LSA to the chassis using bolts E with washers WB to inside of plates on mainframe CB (with bolt heads on the outside) use bushes BU and round spacers RSP together and place between chassis and LSA. 4. Attach LSA to mainframe using bolts B and washers WA. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing. 5. Re fit wheels, dirt guards and exhaust. Attach flange neck F or detachable neck D to the mainframe CB using bolts A or Z. Attach towball A50/1 (not supplied) using bolts G. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:5
246ED 246E
Powder Coated Finish
RENAULT ESPACE & GRAND ESPACE
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com