Rev 2:2
247E 247ED 247ES
Powder Coated Finish
SKODA RAPID 12SEAT TOLEDO 13SKODA RAPID SPACEBACK 13– E11 R55 –0110440 w428
Components
Mainframe
Code
Quantity
CB
1
Crossbar
Description
LS
1
RS
1
Bolt Kit Code
Quantity
WA
4
10mm Large Round Washers
Description
Left Strap
B
2
12x40 Set Screws & Grip Washers
Right Strap
C
2
12x40 Set Screws, Nuts & Grip Washers
E
4
10x40 Set Screws & Grip Washers
(Neck Type) Detachable 'D'
Please See Detachable Neck Box Contents List
Please See Detachable Neck Box Contents List
Swan Neck 'S'
Please See Swan Neck Box Contents List
Please See Swan Neck Box Contents List
Flange Neck 'F'
Please See Flange Neck Box Contents List
Please See Flange Neck Box Contents List
1. To remove bumper, 3 fixings inside each wheel arch. (Note it may be necessary to remove inner wheel arch lining on near side to access mounting holes in the chassis). 2. Remove 3 fixing screws from underside of bumper. 3. Remove plastic cover on inside face of light clusters to reveal fixings. 4. Remove light clusters. 5. Remove bumper starting with tip screws either side. 6. Remove impact beam. Hand to customer. 7. Insert brackets RB and LB inside chassis rails. See diagram for mounting positions. 8. Loosely attach RB & LB using set screws E with washers WA. 9. Loosely attach crossbar CB to brackets RB and LB using set screws B and C. Tighten all fixings. 10. Cut bumper as shown in diagram, reattach bumper. Detachable Neck: Atttach to crossbar CB using set screws Z. Swan Neck: Attach to crossbar CB using CPE10 plates (standard orientation) with set screws Y & bolts W Flange Neck: Attach to crossbar CB using bolts A. Attach type approved towball (not supplied) using fasteners G. 11. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:2
247E 247ED 247ES
Powder Coated Finish
SKODA RAPID 12SEAT TOLEDO 13SKODA RAPID SPACEBACK 13–
VOLKSWAGEN PASSAT SALOON/ ESTATE 2014-
Bolt Torque Settings Bolt Size (mm)
Pitch Torque Setting (mm) (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:2
247E
FLANGE NECK
Powder Coated Finish
Components Code
Quantity
F
1
Bolt Kit
Description Flange Neck
Code
Quantity
A
2
12x100 Bolts, Nuts & Grip Washers
G
2
16x50 Set Screws, Nuts & Grip Washers
w493
Description
1. Loosely attach flange neck F using bolts A. 2. Loosely attach type approved towball (not supplied) using set screws G. 3. Tighten all fixings using a calibrated torque tool to the torque settings specified on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com