Rev 2:1
260E
FORD TRANSIT 2014-
Powder Coated Finish
E11 55R-0110325 Components
Code
Quantity
CB
1
Crossbar
LP
1
RP
1
ANG PP
Bolt Kit
Description
Code
Quantity
WA
8
12mm Large Round Washers
Left Plate
A
2
12x40 Bolts & Grip Washers
Right Plate
B
4
12x50 Bolts, Nuts & Grip Washers
2
Angle
C
4
12x100 Bolts, Nuts & Grip Washers
2
Packing Plate
D
4
12x40 Thread Rolling Bolts
G
2
16x50 Bolts, Nuts & Grip Washers
w1426
Description
1. Lower spare wheel. 2. Remove existing bolts X from the chassis rails. 3. Loosely attach side plates LP and RP to the inside of the chassis sandwiching packing plates PP between, using bolts C with washers WA, also using existing bolts X. 4. Loosely attach angles ANG and crossbar CB to plates LP and RP using bolts B 5. Using bolts D, tighten up in chassis floor, check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing. 6. Secure spare wheel. 7. Attach type approved towball (not supplied) to crossbar CB using bolts G.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
260E
Powder Coated Finish
FORD TRANSIT 201411
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com