Rev 2:1
263E 263ED 263ES
Powder Coated Finish
VW TRANSPORTER T5 & T6 VAN, MINIBUS, CARAVELLE, MULTIVAN, 4 MOTION E11 55R-0110701 w332
Components
Mainframe
Bolt Kit
Code
Quantity
CB
1
Crossbar
Description
PP
1
Packing Piece
CT
2
Cable Ties (Large) AE138
Code
Quantity
WA
6
10mm Large Round Washers
Description
B
6
10x40 Set Screws & Grip Washers
BC12
4
12mm Bolt Covers
(Neck Type) Detachable 'D'
Please See Detachable Neck Box Contents List
Please See Detachable Neck Box Contents List
Swan Neck 'S'
Please See Swan Neck Box Contents List
Please See Swan Neck Box Contents List
Flange Neck 'F'
Please See Flange Neck Box Contents List
Please See Flange Neck Box Contents List
1.
Remove rear bumper.
2.
On Caravelle and Multivan models remove light clusters, On van models, unclip plastic trim.
3.
On models with tailgate, remove plastic fixings from top corner edges.
4.
Remove torque screws from around wheel arches (1 screw behind liner). Remove plastic fixings from lower edge of bumper and pill rearwards, disconnect reversing sensors if fitted.
5.
Remove impact beam, re fit fixings to prevent water ingress. If chassis end stiffeners are present, remove.
6.
Lower spare wheel and dirt tray to reveal 3 fixing holes in each chassis side.
7.
Insert crossbar CB into the chassis and loosely attach using set screws B with washers WA. (On certain models it is necessary to use packing piece PP to support bumper). If so attach PP to crossbar CB using cable ties CT. Tighten all fixings using a calibrated torque tool to the specified settings recommended on the towbar drawing.
8.
Refit dirt shield and bumper.
9.
Refit lights and trim where applicibale.
Detachable Neck: Attach to crossbar CB using set screws Z. Swan Neck: Attach to crossbar CB using spacers IP and set screws A. Flange Neck: Attach to crossbar CB using bolts A. Attach type approved towball (not supplied) using set screws G.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
263E 263ED 263ES
Powder Coated Finish
VW TRANSPORTER T5 & T6 VAN, MINIBUS, CARAVELLE, MULTIVAN, 4 MO-
VOLKSWAGEN PASSAT SALOON/ ESTATE 2014-
Bolt Torque Settings Bolt Size (mm)
Pitch Torque Setting (mm) (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com