276E

Page 1

Rev 2:1

276E

Powder Coated Finish

AUDI A4 SALOON & ESTATE APRIL 2001-2005 (INCLUDING QUATTRO & COUPE) (EXCLUDING S-LINE & S4)

Components Code

Quantity

Description

CB

1

Crossbar

LA

1

Left Angle

RA

1

CS

1

Bolt Kit Code

Quantity

WA

6

10mm Large Round Washers

C

2

5x20 Bolts, Nuts & Grip Washers

Right Angle

E

2

16x50 Bolts, Nuts & Grip Washers

Centre Strut

B

4

12x40 Bolts, Nuts & Grip Washers

A

4

10x100 Bolts, Nuts & Grip Washers

D

2

12x90 Bolts, Nuts & Grip Washers

w1177

Description

1. Remove boot floor covering and rear panel. Remove bumper (6 nuts each side inside vehicle, 2 torx head screws behind wheel arch liners (also retained with torx screws), 5 torx screws along lower edge of bumper. Pull out bumper tips and pull the bumper backwards). Remove and discard bumper impact beam. 2. Temporarily lower exhaust hangers and remove heat shield. Remove tape from forward mounting points. Insert angles LA and RA into the chassis rails and loosely attach using bolts A with washers WA. 3. Loosely attach crossbar CB to angles LA and RA using bolts B. Tighten all bolts. Cut out a slot in the bottom centre edge of the bumper 80mm wide and 50mm deep. Replace exhaust hangers and heat shield. Replace the bumper and attach to the crossbar CB using bolts C on lower fixings. 4. Attach centre strut CS to the crossbar CB using bolts D. 5. Attach type approved towball (not supplied) using set screws E. 6. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.

PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.

Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com

www.towsure.com


Rev 2:1

276E

Powder Coated

AUDI A4 SALOON & ESTATE APRIL 2001-2005 (Inc QUATTRO & COUPE) (Exc S-LINE)

Bolt Torque Settings Bolt Size (mm)

Pitch (mm)

Torque Setting (Nm) 8.8 Tensile

5

0.80

6.09

6

1.00

10.50

8

1.25

25.30

10

1.25

46.00

10

1.50

50.90

12

1.25

83.00

12

1.50

87.81

12

1.75

87.27

14

2.00

139.00

16

2.00

213.00

PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.

Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com

www.towsure.com


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.