Rev 2:14
364E
Powder Coated Finish
LAND ROVER FREELANDER 1997-2006 e11*94/20*2836*00
Components Code
Quantity
CB
1
F
1
Description
Bolt Kit Code
Quantity
Crossbar
W
6
10mm Small Round Washers
Flange Neck
WA
2
12mm Large Round Washers
G
2
16x50 Set Screws, Nuts & Grip Washers
B
2
12x1.25x75 Bolts & Grip Washers
C
2
12x70 Bolts, Nuts & Grip Washers
D
6
10x30 Set Screws & Grip Washers
BC12
4
12mm Bolt Covers
w872
Description
1. Remove three bolts securing the towing eye. Do not remove the towing eye. 2. Clean out the threaded points in the chassis rails. Remove the tape covering the holes in the rear cross member and clean out. 3. Loosely attach crossbar CB to the chassis rails using set screws D with washers W. 4. Locate the existing holes in the rear cross member and insert bolts B with washers WA. 5. Attach flange neck F using bolts C and type approved towball (not supplied) using set screws G. 6. Tighten all fixings using a calibrated torque tool to the specified torque settings on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com
Rev 2:1
364E
Powder Coated Finish
LANDROVER FREELANDER
Bolt Torque Settings Bolt Size (mm)
Pitch (mm)
Torque Setting (Nm) 8.8 Tensile
5
0.80
6.09
6
1.00
10.50
8
1.25
25.30
10
1.25
46.00
10
1.50
50.90
12
1.25
83.00
12
1.50
87.81
12
1.75
87.27
14
2.00
139.00
16
2.00
213.00
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com